Age | Commit message (Collapse) | Author |
|
By disabling some of the most slow drivers by default, and giving progress
feedback to the user.
* linux/configfrag.ac (CONFIG_SCSI_NCR53C7xx, CONFIG_SCSI_AIC7XXX,
CONFIG_SCSI_GDTH): Disable by default
* linux/src/drivers/scsi/eata.c (__initfunc): Don't feed line in probe
message.
* linux/src/drivers/scsi/hosts.c (scsi_init): Print SCSI probe progress.
|
|
Some versions of GCC will error if you define a type twice (even if
the definition is the same). The NCR53C8XX SCSI driver defines
'vm_offset_t', this is also defined in vm_types.h and will therefore
cause a compilation error depending on the GCC version.
* linux/src/drivers/scsi/ncr53c8xx.c [!MACH] (vm_offset_t, vm_size_t): Don't
define types.
|
|
* i386/i386/vm_param.h [!MACH_XEN]: Do not include <xen/public/xen.h>.
* i386/i386at/model_dep.c (init_alloc_aligned): Use phystokv to compare physical
memory addresses with kernel start, end, and symbol table.
* i386/intel/pmap.c (pmap_enter): Use kvtophys to convert ptp pointer to pte
entry.
* linux/dev/init/main.c (alloc_contig_mem, linux_init): Use phystokv to convert
allocated pages to virtual pointer.
* linux/src/include/asm-i386/io.h: Include <machine/vm_param.h>.
(virt_to_phys): Call _kvtophys.
(phys_to_virt): Call phystokv.
* linux/src/include/linux/compatmac.h: Include <asm/io.h>.
(ioremap): Use phys_to_virt to convert physical address to virtual pointer.
(my_iounmap): Likewise.
* linux/dev/include/asm-i386/page.h: Include <mach/vm_param.h>.
(PAGE_SHIFT, PAGE_SIZE, PAGE_MASK): Remove macros.
* linux/src/drivers/scsi/ncr53c8xx.c (vm_size_t): Remove type.
* linux/dev/glue/net.c: Include <machine/vm_param.h>
(device_write): Call phystokv to convert from physical page address to
virtual pointer.
* linux/dev/glue/block.c (alloc_buffer, free_buffer, rdwr_full): Likewise.
|
|
On amd64 the cpu flags is a 64-bit word, and long on 32-bit systems is
32-bit wide anyway.
* linux/dev/glue/kmem.c (linux_kmalloc, linux_kfree, __get_free_pages,
free_pages): Use unsigned long instead of unsigned.
* linux/dev/include/asm-i386/system.h (__save_flags, __restore_flags):
Likewise.
* linux/dev/kernel/printk.c (printk): Likewise.
* linux/src/drivers/scsi/advansys.c (DvcEnterCritical, DvcLeaveCritical,
advansys_queuecommand, advansys_abort, advansys_reset, advansys_interrupt,
interrupts_enabled, AdvISR): Likewise.
* linux/src/drivers/scsi/aha152x.c (aha152x_intr): Likewise.
* linux/src/drivers/scsi/aha1542.c (aha1542_intr_handle): Likewise.
* linux/src/drivers/scsi/aic7xxx.c (aic7xxx_done_cmds_complete): Likewise.
* linux/src/drivers/scsi/ultrastor.c (log_ultrastor_abort,
ultrastor_queuecommand, ultrastor_abort): Likewise.
|
|
* linux/src/drivers/scsi/aha1542.c (aha1542_setup): Use %s format for printing a
mere string, not the string.
|
|
* linux/src/drivers/scsi/advansys.c (asc_prt_line): Use %s format for
printing a mere string, not the string.
|
|
The driver can work with them, and request_irq works fine with them.
* linux/src/drivers/scsi/sym53c8xx.c (ncr_attach): Do not pass SA_INTERRUPT to
request_irq().
|
|
This driver supports qemu's SCSI host device.
Unfortunately it seems to be breaking the network device, so test with care.
* linux/Makefrag.am (liblinux_a_SOURCES): Add
linux/src/drivers/scsi/sym53c8xx{.c,_comm.h,.h,_defs.h}
* linux/configfrag.ac: Add AC_Linux_DRIVER([sym53c8xx] to enable
CONFIG_SCSI_SYM53C8XX.
* linux/dev/glue/kmem.c (MEM_CHUNKS): Increase to 16.
* linux/src/drivers/scsi/hosts.c [CONFIG_SCSI_SYM53C8XX]: Include "sym53c8xx.h".
(builtin_scsi_hosts): include SYM53C8XX.
|
|
Otherwise the function wrongly uses the global symbol.
* linux/src/drivers/scsi/ppa.c (ppa_nibble_in): Rename `str_p' argument
to `base'.
|
|
* linux/src/drivers/scsi/gdth.c (gdth_detect): Conditionalize `b' on
[LINUX_VERSION_CODE < 0x020000]. Do not preset it to 0, it's initialized
later on when needed.
|
|
* linux/dev/drivers/block/floppy.c (setup_rw_floppy): Remove `dflags'.
(floppy_eject): Remove `dummy'.
* linux/src/drivers/net/8390.c (ethdev_init): Remove `ei_local'.
* linux/src/drivers/scsi/ppa.c (ppa_detect): Remove `ppb'.
|
|
* linux/src/drivers/scsi/wd7000.c (mail_out): Add `1' instead of
pre-incrementing self assigned variable.
* linux/src/drivers/net/de4x5.c (de4x5_sw_reset, de4x5_queue_pkt, de4x5_rx)
(de4x5_tx, de4x5_rx_ovfc, set_multicast_list, ping_media, mii_get_phy)
(de4x5_ioctl): Likewise.
* linux/src/drivers/net/depca.c (depca_rx, depca_tx, load_packet): Likewise.
|
|
* linux/src/drivers/scsi/FlashPoint.c: Remove #ident tags.
|
|
* linux/src/drivers/scsi/ultrastor.c (find_and_clear_bit_16): Use + modifier
instead of using both a read and a write constraint.
|
|
* linux/src/drivers/scsi/aha1542.c (WAIT, WAITd): Define variables
with explicit type `register int' and not just `register'.
|
|
* linux/src/drivers/scsi/eata.c (port_detect): Print the port being
probed.
|
|
* kern/pcsample.h: Remove the automatic cvs log appending machinery.
* linux/dev/drivers/scsi/g_NCR5380.c: Likewise.
* linux/src/drivers/net/sk_g16.h: Likewise.
* linux/src/drivers/scsi/AM53C974.c: Likewise.
* linux/src/drivers/scsi/AM53C974.h: Likewise.
* linux/src/drivers/scsi/NCR5380.c: Likewise.
* linux/src/drivers/scsi/NCR5380.h: Likewise.
* linux/src/drivers/scsi/aha152x.c: Likewise.
* linux/src/drivers/scsi/aha1542.h: Likewise.
* linux/src/drivers/scsi/g_NCR5380.c: Likewise.
* linux/src/drivers/scsi/g_NCR5380.h: Likewise.
* linux/src/drivers/scsi/gdth.c: Likewise.
* linux/src/drivers/scsi/qlogicisp.c: Likewise.
* linux/src/drivers/scsi/qlogicisp.h: Likewise.
* linux/src/drivers/scsi/t128.c: Likewise.
* linux/src/drivers/scsi/t128.h: Likewise.
|
|
* linux/src/drivers/scsi/in2000.c (in2000_proc_info) [PROC_INTERFACE]:
Don't consider `__DATE__' and `__TIME__'.
|
|
* linux/dev/drivers/scsi/scsi.h: Move file...
* linux/src/drivers/scsi/scsi.h: ... here.
|
|
* linux/dev/drivers/scsi/seagate.c: Move file...
* linux/src/drivers/scsi/seagate.c: ... here.
|
|
* linux/dev/drivers/scsi/aha152x.c: Move file...
* linux/src/drivers/scsi/aha152x.c: ... here.
|
|
* linux/dev/drivers/scsi/sr.c: Move file...
* linux/src/drivers/scsi/sr.c: ... here.
|
|
* linux/dev/drivers/scsi/sd_ioctl.c: Move file...
* linux/src/drivers/scsi/sd_ioctl.c: ... here.
|
|
* linux/dev/drivers/scsi/sd.c: Move file...
* linux/src/drivers/scsi/sd.c: ... here.
|
|
* linux/src/drivers/scsi/eata_pio.c (eata_pio_detect): Fix a
off-by-one error when probing.
* linux/src/drivers/scsi/eata_dma.c (eata_detect): Likewise.
* linux/dev/drivers/scsi/eata_dma.c (eata_detect): Likewise.
|
|
* linux/src/drivers/scsi/u14-34f.c (ihdlr): Silence gcc 4.x
errors.
* linux/src/drivers/scsi/qlogicisp.h: Likewise.
* linux/src/drivers/scsi/advansys.c: Likewise.
(advansys_reset, advansys_interrupt, asc_scsi_done_list,
(asc_enqueue, asc_dequeue, asc_dequeue_list, asc_rmqueue,
(asc_isqueued): Likewise.
* linux/src/drivers/scsi/53c78xx.c (NCR53c7xx_queue_command):
Likewise.
* linux/src/drivers/net/ne2k-pci.c (ne_block_input)
(ne_block_output): Likewise.
* linux/src/drivers/net/hp100.c (__initfunc): Likewise.
* linux/src/drivers/net/3c507.c (el16_interrupt): Likewise.
* linux/dev/drivers/scsi/seagate.c (seagate_st0x_queue_command):
Likewise.
|
|
* linux/src/drivers/scsi/qlogicisp_asm.c: Remove file with binary
only firmware.
* linux/src/drivers/scsi/qlogicisp.c: Do not include "qlogicisp_asm.c".
(RELOAD_FIRMWARE): Set to 0.
(risc_code_addr01): New variable from qlogicisp_asm.c.
* linux/Files: Remove linux/src/drivers/scsi/qlogicisp_asm.c.
|
|
* linux/src/drivers/scsi/aic7xxx.c: Updated from Linux 2.0.39
* linux/src/drivers/scsi/aic7xxx.h: Likewise.
* linux/src/drivers/scsi/aic7xxx_proc.c: Likewise.
* linux/src/drivers/scsi/scsicam.c: Likewise.
* linux/src/include/linux/pci.h: Likewise.
|
|
* linux/src/drivers/scsi/53c7,8xx.h (patch_dsa_32): Don't use
token paste operator (##).
|
|
* debian/rules: Add --enable-ncr53c8xx to configure.
1999-10-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* linux/src/drivers/scsi/tmscsiw.c: Removed.
* linux/src/drivers/scsi/tmscsiw.h: Likewise.
* linux/src/drivers/scsi/dc390w.h: Likewise.
* i386/linux/device-drivers.h.in (CONFIG_SCSI_DC390W): Deleted.
* i386/linux/Drivers.in: Remove linux_DRIVER(dc390w, ...). Now
dc390w, dc390u, and dc390f are aliases to ncr53c8xx.
* i386/linux/configure: Regenerated.
* linux/Files: Likewise.
* i386/linux/Makefile.in (linux-scsi-files): Delete tmscsiw.c.
* linux/dev/drivers/scsi/hosts.c: Do not include dc390w.h.
Reported by Andreas Voegele <andreas.voegele@nikocity.de>.
|
|
* debian/changelog: Add entry for new Debian upload.
* linux/dev/drivers/scsi/seagate.c (WRITE_CONTROL, WRITE_DATA):
Added from linux 2.2.15.
(__asm__ constructs): Replace with equivalent C code from linux 2.2.15
to support gcc-2.95.
* linux/src/drivers/scsi/in2000.h: Update asm code to linux 2.2.15.
* linux/src/drivers/scsi/ppa.c: Replace asm code with equivalent
C code from linux 2.2.15.
2000-02-06 Stefan Weil <stefan.weil@de.heidelberg.com>
* device/subrs.c: Fixed compiler warning.
* ddb/db_output.c, kern/bootstrap.c, kern/debug.c, kern/printf.c:
Replaced varargs.h by stdarg.h. Fixed prototypes (const char *fmt).
* ddb/db_output.h: Use prototype for db_printf.
* i386/Files: removed varargs.h.
* i386/i386/pit.h: Fixed compiler warning.
* i386/i386at/model_dep.c: Tried to fix compiler warning.
* i386/include/mach/sa/sys/varargs.h: Removed.
* i386/linux/Makefile.in: Removed delay.S, added delay.c.
* linux/dev/include/asm-i386/segment.h: Support gcc-2.95.
* linux/dev/include/asm-i386/string.h,
linux/src/include/asm-i386/string.h: Update from linux-2.2.14.
* linux/dev/lib/vsprintf.c: Fixed compiler warning.
* linux/src/include/asm-i386/delay.h: Update from linux-2.2.14.
* linux/src/arch/i386/lib/delay.c: Copy from linux-2.2.14.
* linux/src/include/asm-i386/string.h: Update from linux-2.2.14.
|
|
Clean up linux emulation code to make it architecture-independent
as much as possible.
* linux: Renamed from linuxdev.
* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
(MAKE): New variable. Used for the linux.o target.
* configure.in: Add AC_CHECK_TOOL(MAKE, make).
* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
* linux/src: Renamed from linux/linux.
* linux/dev: Renamed from linux/mach.
* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
instead of mach/include/linux/autoconf.h.
* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
of <i386/ipl.h>.
* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
<i386/ipl.h> and <i386/pic.h>.
* linux/dev/init/main.c: Many i386-dependent codes moved to ...
* linux/dev/arch/i386/irq.c: ... here.
* linux/dev/arch/i386/setup.c: New file.
* linux/dev/arch/i386/linux_emul.h: Likewise.
* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
of <i386/ipl.h>, and moved to ...
* linux/dev/kernel/sched.c: ... here.
* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
<linux_emul.h>, instead of i386-dependent header files, and
moved to ...
* linux/dev/glue/blocl.c: ... here.
* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
<linux_emul.h>, instead of i386-dependent header files, and
moved to ...
* linux/dev/glue/net.c: ... here.
* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
* linux/dev/glue/misc.c: ... here.
* linux/dev/arch/i386/glue/kmem.c: Moved to ...
* linux/dev/glue/kmem.c: ... here.
|