summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-04Use explicit prototypes for struct dev_ops fieldsMarin Ramesa
* device/conf.h: Include <sys/types.h>, <mach/port.h>, <mach/vm_prot.h>. Predefine struct io_req, io_req_t and io_return_t. (dev_ops): Add explicit prototypes for d_open, d_close, d_read, d_write, d_getstat, d_setstat, d_mmap, d_port_death. (nulldev_open, nulldev_close, nulldev_read, nulldev_write, nulldev_getstat, nulldev_setstat, nulldev_portdeath): Add prototypes. (nomap): Fix prototype. * device/dev_name.c (nulldev_open, nulldev_close, nulldev_read, nulldev_write, nulldev_getstat, nulldev_setstat, nulldev_portdeath): New functions. (nomap): Fix prototype. * device/ds_routines.c (dev_close): Pass 0 as flag parameter. * device/kmsg.c (kmsgclose): Drop return value. * device/kmsg.h (kmsgclose): Fix prototype. * i386/i386at/com.c (comopen): Fix prototype. (comclose): Fix prototype, drop return value. (comread, comwrite): Fix prototype. * i386/i386at/com.h (comopen, comclose, comread, comwrite): Fix prototype. * i386/i386at/conf.c (dev_ops): Use nulldev_open, nulldev_close, nulldev_read, nulldev_write, nulldev_getstat, nulldev_setstat, nulldev_portdeath where appropriate. * i386/i386at/kd.c (kdclose, kdread, kdwrite, kdmmap): Fix prototype. * i386/i386at/kd.h (kdclose, kdread, kdwrite, kdmmap): Likewise. * i386/i386at/kd_event.c (kbdopen): Likewise. * i386/i386at/kd_event.h (kbdopen): Likewise. * i386/i386at/kd_mouse.c (mouseopen): Likewise. * i386/i386at/kd_mouse.h (mouseopen): Likewise. * i386/i386at/lpr.c (lpropen, lprclose, lprread, lprwrite): Likewise. * i386/i386at/lpr.h (lpropen, lprclose, lprread, lprwrite): Likewise. * i386/i386at/mem.c (memmmap): Likewise. * i386/i386at/mem.h (memmmap): Likewise. * i386/i386at/model_dep.c (timemmap): Likewise. * i386/i386at/model_dep.h (timemmap): Likewise. * kern/mach_clock.c (timeopen, timeclose): Likewise. * kern/mach_clock.h: Include <sys/types.h>, predefine struct io_req and io_req_t. (timeopen, timeclose): Fix prototype.
2014-03-28Assume EGA/VGA cardSamuel Thibault
CGA and MONO cards are more than hard to find nowadays, and some buggy BIOSes claim running them nowadays... * i386/i386at/kd.c (kd_xga_init): Do not handle CGA and MONO cases any more, which thus default to EGA/VGA.
2014-03-28Really default to EGA/VGA on unknown CMOS valuesSamuel Thibault
* i386/i386at/kd.c (kd_xga_init): Use CM_EGA_VGA behavior as default case for unknown values of CMOS data.
2014-03-26kern: fix formatting of multiboot modulesJustus Winter
Previously, bootstrap_create would print the multiboot modules with padding applied to the end of the line. As multiboot modules as used by the Hurd span more than one line. This makes the list of modules hard to read and it looks unclean, more like an accident. Furthermore, it is not clear what the intend of this was, as the padding is applied at the end of the line, with no further information printed thereafter. * kern/bootstrap.c (bootstrap_create): Remove variable maxlen and len, update printfs.
2014-03-25include: make the memory_object_t types translation functions mutableJustus Winter
Make the intran, outtran and destructor functions mutable using preprocessor macros. Make it possible to inject imports using the MEMORY_OBJECT_IMPORTS macro. This way, userspace servers can provide their own translation functions. * include/mach/mach_types.defs (memory_object_t): Make the translation mutable using preprocessor macros. * include/mach/memory_object.defs: Likewise for the inlined type declarations. Honor MEMORY_OBJECT_IMPORTS. * include/mach/memory_object_default.defs: Likewise.
2014-03-22Merge branch 'master' of git.savannah.gnu.org:/srv/git/hurd/gnumachSamuel Thibault
2014-03-22Fix overflowSamuel Thibault
We were filling much more than the mapwindows array, thus overwriting in at least debugger variables. * i386/intel/pmap.c (pmap_bootstrap): Make sure to limit mapwindows initialization within PMAP_NMAPWINDOWS.
2014-03-20xen: fix error handlingJustus Winter
Previously, the error KERN_RESOURCE_SHORTAGE was not properly propagated. Found using the Clang Static Analyzer. * xen/block.c (device_open): Fix error handling, remove unused label. * xen/net.c (device_open): Likewise.
2014-03-20Only complain once per boot about Xen console smashSamuel Thibault
* xen/console.c (hypputc): Make `complain' variable static.
2014-03-17Increase possible number of AHCI devices to 8Samuel Thibault
by reducing possible number of partitions to 32. * linux/dev/drivers/block/ahci.c (MAX_PORTS): Set to 8. (PARTN_BITS): Set to 5.
2014-03-03Merge branch 'master' of git.savannah.gnu.org:/srv/git/hurd/gnumachSamuel Thibault
2014-03-03Keep two virtual pages as mapping windows to access physical memorySamuel Thibault
PCI devices expose their memory etc. way beyond last_phys_addr. Userland drivers opening /dev/mem need to open those too, even if phystokv() will not work for them. * i386/intel/pmap.h (pmap_mapwindow_t): New type. (pmap_get_mapwindow, pmap_put_mapwindow): New prototypes. (PMAP_NMAPWINDOWS): New macro. * i386/intel/pmap.c (mapwindows): New array. (pmap_get_mapwindow, pmap_put_mapwindow): New functions. (pmap_bootstrap, pmap_virtual_space): Reserve virtual pages for the mapping windows. * i386/i386/phys.c: Include <i386/model_dep.h> (INTEL_PTE_W, INTEL_PTE_R): New macros (pmap_zero_page, pmap_copy_page, copy_to_phys, copy_from_phys): Use `pmap_get_mapwindow' to temporarily map physical pages beyond last_phys_addr.
2014-02-26kern: fix mig_strncpyJustus Winter
Previously, the function mig_strncpy would always zero-terminate the destination string. Make mig_strncpy behave like mig_strncpy and strncpy in the glibc. Also fix the implementation of mig_strncpy to return the length of the written string to align the implementation with the declaration in include/mach/mig_support.h. * kern/ipc_mig.c (mig_strncpy): Do not zero-terminate the destination string. Return length of destination string.
2014-02-23Merge branch 'master' of git.savannah.gnu.org:/srv/git/hurd/gnumachSamuel Thibault
2014-02-23AHCI driver cleanupsSamuel Thibault
* linux/dev/drivers/block/ahci.c (struct port): Add id and is_cd fields. (ahci_end_request): Only print error if quiet flag of the request is not set. (ahci_do_port_request): Upgrade sector parameter to 64 bit. Include those bits in the LBA48 request. (ahci_do_request): Upgrade sector count to 64bit. Only print errors if quiet flag of the request is not set. (ahci_probe_port): Move identify code... (ahci_identify): ... to new function. Handle WIN_PIDENTIFY case to recognize ATAPI devices. (ahci_probe_port): Also try WIN_PIDENTIFY command. (ahci_geninit): Avoid checking partition table on empty devices.
2014-02-19include: skip routines related to migrating threadsJustus Winter
* include/mach/mach_port.defs: Skip the routines mach_port_set_rpcinfo and mach_port_create_act if MIGRATING_THREADS is not defined.
2014-02-12Reduce kmem_map to make room for kentry_data_sizeSamuel Thibault
* kern/slab.c (KMEM_MAP_SIZE): Decrease from 128MiB to 96MiB.
2014-02-10Make open return ENXIO on missing CD-ROMSamuel Thibault
* linux/src/drivers/block/ide-cd.c (ide_cdrom_open): Return -ENXIO when CD sense failed.
2014-02-10Add quiet flag to CD I/OSamuel Thibault
* linux/src/drivers/block/ide-cd.c (cdrom_queue_packet_command): Add `quiet' parameter, copied into the request. (cdrom_decode_status): Do not print I/O error when `quiet' field of request is non-zero. (cdrom_end_request): Do not print sense results when `quiet' field of request is non-zero. (cdrom_check_status, cdrom_read_capacity, cdrom_read_tocentry): Pass 1 to `cdrom_queue_packet_command''s `quiet' parameter. (cdrom_lockdoor, cdrom_eject, cdrom_pause, cdrom_startstop, cdrom_read_subchannel, cdrom_mode_sense, cdrom_mode_select, cdrom_play_lba_range_1, cdrom_read_block, cdrom_load_unload, ide_cdrom_ioctl): Pass 0 to `cdrom_queue_packet_command''s `quiet' parameter.
2014-02-10Add missing initializationSamuel Thibault
* linux/src/drivers/block/ide.c (ide_init_drive_cmd): Initialize `quiet' field of request to 0;
2014-02-10Merge branch 'master' of git.savannah.gnu.org:/srv/git/hurd/gnumachSamuel Thibault
2014-02-10Add quiet flag to block I/OSamuel Thibault
This avoids grub & such making Mach print flurries of floppy errors. * linux/dev/include/linux/blkdev.h (request): Add `quiet' field. * linux/dev/include/linux/blk.h (end_request): Print I/O error only if the `quiet' field of the request is 0. * linux/dev/include/linux/fs.h (ll_rw_block): Add `quiet' parameter. * linux/dev/glue/block.c (ll_rw_block): Add `quiet' parameter, copied into the request. (bread, rdwr_partial, rdwr_full): Pass 0 to `ll_rw_block''s `quiet' parameter. * linux/dev/drivers/block/floppy.c (floppy_revalidate): Pass 1 to `ll_rw_block''s `quiet' parameter.
2014-02-06vm: trigger garbage collection on kernel memory pressureRichard Braun
In addition to physical pages, the slab allocator also consumes kernel virtual memory, so reclaim pages on failure to allocate from a kernel map. This method isn't foolproof but helps alleviate fragmentation. * vm/vm_kern.c (kmem_alloc): Call slab_collect and retry allocation once on failure. (kmem_realloc): Likewise. (kmem_alloc_wired): Likewise. (kmem_alloc_wired): Likewise. (kmem_alloc_aligned): Likewise.
2014-02-05Remove duplicate typedefSamuel Thibault
* device/net_io.c (net_rcv_port_t, net_hash_entry_t, net_hash_header_t): Remove duplicate typedefs.
2014-02-05doc: document task_set_nameJustus Winter
* doc/mach.texi (Task Information): Document the new task_set_name procedure.
2014-02-05include: add task_set_nameJustus Winter
task_set_name sets the name of a task. This is a debugging aid. The name will be used in error messages printed by the kernel. * include/mach/gnumach.defs (task_set_name): New procedure.
2014-02-05kern: implement task_set_nameJustus Winter
task_set_name sets the name of a task. This is a debugging aid. The name will be used in error messages printed by the kernel. * kern/task.c (task_set_name): New function. * kern/task.h (task_set_name): New declaration.
2014-02-04Fix comstart when the queue is emptySamuel Thibault
Found by Coverity * i386/i386at/com.c (comstart): Make `nch' an int. When `getc' returns -1, just return.
2014-02-04Fix potential NULL dereferenceSamuel Thibault
Found by Coverity * i386/i386/user_ldt.c (i386_get_ldt): Fetch `pcb' field of `thread' only after looking for `thread' being NULL.
2014-02-04Fix potential NULL dereferenceSamuel Thibault
* vm/vm_kern.c (projected_buffer_deallocate): Look for `map' being NULL or kernel_map before locking it.
2014-02-04Fix potential NULL dereferenceSamuel Thibault
Found by Coverity * i386/i386/db_trace.c (db_find_kthread): Handle case when task is NULL.
2014-02-04Fix potential NULL dereferenceSamuel Thibault
Found by Coverity. * i386/i386at/com.c (comopen): On com_reprobe() returning success, check for `isai' again.
2014-02-04xen: fix buffer sizeJustus Winter
Previously, only strlen(device_name) bytes were allocated, missing one byte for the terminating zero. * xen/block.c (hyp_block_init): Fix buffer size.
2014-02-04ddb: safely copy symbol names into the symtab structureJustus Winter
Use strncpy instead of strcpy to copy the name of a symbol into the symtab structure. Make sure that the string is properly terminated. Found using Coverity. * ddb/db_sym.c (db_add_symbol_table): Use strncpy instead of strcpy, ensure string termination.
2014-02-04kern: make kmem_error panicJustus Winter
The slab allocator relies on the fact that kmem_cache_error does not return. Previously, kmem_error was using printf. Use panic instead. Found using the Clang Static Analyzer. * kern/slab.c (kmem_error): Use panic instead of printf.
2014-02-04kern: use kmem_warn instead of kmem_error in kmem_cache_errorJustus Winter
* kern/slab.c (kmem_cache_error): Use kmem_warn instead of kmem_error to print the cache name and its address.
2014-02-04Fix FPU state copy sizeSamuel Thibault
* i386/i386/fpu.c (fpu_set_state, fpu_get_state): Fix size of `user_fp_regs' access.
2014-02-04Make empty while loops more prominentSamuel Thibault
* i386/i386at/kd.c (kdintr, kd_senddata, kd_sendcmd, kd_getgata, kd_cmdreg_read, kd_cmdreg_write, kd_mouse_drain): Move semi colon of empty while loops on a single line to make it more visible.
2014-02-04Fix FPU state accessSamuel Thibault
Found by coverity. * i386/i386/fpu.c (fpu_set_state, fpu_get_state): Fix out of bound `user_fp_regs' access.
2014-02-04Fix typoSamuel Thibault
* i386/i386at/kd_mouse.c (mouseopen): Fix typo.
2014-02-04Merge branch 'master' of git.savannah.gnu.org:/srv/git/hurd/gnumachSamuel Thibault
2014-02-04Add missing breakSamuel Thibault
Found by Coverity * i386/i386at/kd_mouse.c (mouseopen): Add missing break.
2014-02-01include: add a fixed-size string type for debugging purposesJustus Winter
* include/mach/debug.defs: New file. * include/mach/debug.h: Likewise.
2014-02-01ipc: use the name of the task for error messagesJustus Winter
* ipc/mach_port.c (mach_port_destroy): Use the name of the task for error messages. (mach_port_deallocate): Likewise.
2014-02-01kern: add a name field to struct taskJustus Winter
* kern/task.c (task_create): Initialize name with the address of the task. * kern/task.h (TASK_NAME_SIZE): New definition. (struct task): Add field name.
2014-02-01kern: add snprintfJustus Winter
* kern/printf.c (snprintf): New function. * kern/printf.h (snprintf): New declaration.
2014-01-16kern: include the mig-generated server headers in ipc_kobject.cJustus Winter
GNU MIG recently gained support for emitting x_server_routine declarations in the generated server header file. Using this declaration, the x_server_routine functions can be inlined into the ipc_kobject_server function. * kern/ipc_kobject.c: Include the mig-generated server headers.
2014-01-16vm: remove the declaration of memory_object_create_proxyJustus Winter
It is not clear to me why the declaration was put there in the first place. It is not used anywhere, and it conflicts with the declaration generated by mig. * vm/memory_object_proxy.h (memory_object_create_proxy): Remove declaration.
2014-01-09kern: align kmem_cache objects using __cacheline_alignedJustus Winter
* kern/slab.h (struct kmem_cache): Align kmem_cache objects using __cacheline_aligned.
2014-01-09include: add new file for cache-related definitionsJustus Winter
* include/cache.h (__cacheline_aligned): This macro can be used to align statically allocated objects so that they start at a cache line.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 01:47:27 +0000