Age | Commit message (Collapse) | Author |
|
This driver supports qemu's SCSI host device.
Unfortunately it seems to be breaking the network device, so test with care.
* linux/Makefrag.am (liblinux_a_SOURCES): Add
linux/src/drivers/scsi/sym53c8xx{.c,_comm.h,.h,_defs.h}
* linux/configfrag.ac: Add AC_Linux_DRIVER([sym53c8xx] to enable
CONFIG_SCSI_SYM53C8XX.
* linux/dev/glue/kmem.c (MEM_CHUNKS): Increase to 16.
* linux/src/drivers/scsi/hosts.c [CONFIG_SCSI_SYM53C8XX]: Include "sym53c8xx.h".
(builtin_scsi_hosts): include SYM53C8XX.
|
|
* ipc/ipc_kmsg.c (ipc_kmsg_copyin_body): Change length type to
unsigned64_t. Cast number to unsigned64_t.
(ipc_kmsg_copyout_body): Likewise.
|
|
Interrupting a thread without a continuation, puts it in a
inconsistent state. This is the cause for the bug described in
https://lists.gnu.org/archive/html/bug-hurd/2011-09/msg00148.html
* kern/thread.c (thread_suspend): Fail with KERN_FAILURE if thread is
uninterruptible.
|
|
Use «unifdef -DMACK_KERNEL=1» as a starting point, but only remove
the code not exposed on public headers, the rest is needed to build
properly from userland.
* device/cons.c [!MACH_KERNEL]: Remove includes.
[!MACH_KERNEL] (constty): Remove variable.
(cninit, cnmaygetc) [MACH_KERNEL]: Remove preprocessor conditionals.
[!MACH_KERNEL] (cnopen, cnclose, cnread, cnwrite, cnioctl, cnselect)
(cncontrol): Remove functions.
* device/cons.h (struct consdev) [MACH_KERNEL]: Remove preprocessor
conditional.
* device/kmsg.h [MACH_KERNEL]: Likewise.
* i386/i386at/autoconf.c [!MACH_KERNEL]: Remove includes.
* i386/i386at/kd_event.c [!MACH_KERNEL]: Likewise.
[!MACH_KERNEL] (kbd_sel, kbdpgrp, kbdflag): Remove variables.
[!MACH_KERNEL] (KBD_COLL, KBD_ASYNC, KBD_NBIO): Remove macros.
(kbdopen, kbdclose, kbd_enqueue) [!MACH_KERNEL]: Remove code.
[!MACH_KERNEL] (kbdioctl, kbdselect, kbdread): Remove functions.
[!MACH_KERNEL] (X_kdb_enter_init, X_kdb_exit_init: Likewise.
* i386/i386at/kd_mouse.c [!MACH_KERNEL]: Remove includes.
[!MACH_KERNEL] (mouse_sel, mousepgrp, mouseflag): Remove variables.
[!MACH_KERNEL] (MOUSE_COLL, MOUSE_ASYNC, MOUSE_NBIO): Remove macros.
(mouseopen, mouseclose, kd_mouse_read, mouse_enqueue) [!MACH_KERNEL]: Remove
code.
[!MACH_KERNEL] (mouseioctl, mouseselect, mouseread): Remove functions.
* i386/i386at/lpr.c [!MACH_KERNEL]: Remove includes.
(lpropen) [MACH_KERNEL]: Remove preprocessor conditionals.
(lpropen, lprclose, lprstart) [!MACH_KERNEL]: Remove code.
[!MACH_KERNEL] (lprwrite, lprioctl, lprstop): Remove functions.
* i386/i386at/rtc.c (readtodc, writetodc) [!MACH_KERNEL]: Remove code.
* kern/mach_factor.c [MACH_KERNEL]: Remove preprocessor conditional.
* xen/time.c (readtodc) [!MACH_KERNEL]: Remove code.
|
|
|
|
* Makefile.am (clib_routines): Remove strpbrk.
|
|
* doc/.gitignore: ... here;
* i386/i386/.gitignore: ... here;
* tests/.gitignore: ..., and here.
|
|
parameter list.
* i386/i386/pcb.c (stack_attach): Likewise.
|
|
* i386/i386/trap.c (recover_table, recover_table_end, retry_table)
(retry_table_end): Move declarations to...
* i386/i386/locore.h: ... here.
|
|
* vm/memory_object_proxy.h: Add #includes.
(memory_object_proxy_lookup): New declaration.
* vm/memory_object_proxy.c: #include <vm/memory_object_proxy.h>.
* vm/vm_user.c: Likewise.
(memory_object_proxy_lookup): Drop declaration.
Parts based on a patch by Fridolín Pokorný <fridolin.pokorny@gmail.com>.
|
|
* kern/bootstrap.c (bootstrap_create): Do not show freed module memory.
|
|
* vm/vm_resident.c (pmap_startup): Warn when some pages could not be included
in the allocator due to bad estimation.
* kern/bootstrap.c: Include <vm/pmap.h>.
(bootstrap_create): Call vm_page_create on bootstrap modules content.
|
|
* vm/memory_object_proxy.h: Add file.
* vm/vm_init.c: Include <vm/memory_object_proxy.h>.
* kern/ipc_kobject.c: Likewise.
* Makefile.am (libkernel_a_SOURCES): Add vm/memory_object_proxy.h.
|
|
|
|
* kern/compat_xxx_defs.h: Remove file.
* Makefrag.am (libkernel_a_SOURCES): Remove `kern/compat_xxx_defs.h'.
* include/mach/mach_types.defs (xxx_emulation_vector_t): Remove type.
* device/device.srv: Do not simport <kern/compat_xxx_defs.h>.
* kern/mach.srv: Likewise.
* kern/mach_host.srv: Likewise.
* include/device/device.defs [MACH_KERNEL]: Do not simport
<kern/compat_xxx_defs.h>.
(xxx_device_set_status, xxx_device_get_status)
(xxx_device_set_filter): Replace routine declarations with skip
directives.
* include/mach/mach.defs [MACH_KERNEL]: Do not simport
<kern/compat_xxx_defs.h>.
(xxx_memory_object_lock_request, xxx_task_get_emulation_vector)
(xxx_task_set_emulation_vector, xxx_host_info, xxx_slot_info)
(xxx_cpu_control, xxx_task_info, xxx_thread_get_state)
(xxx_thread_set_state, xxx_thread_info): Replace routine declarations
with skip directive.
* include/mach/mach_host.defs [MACH_KERNEL]: Do not simport
<kern/compat_xxx_defs.h>.
(yyy_host_info, yyy_processor_info, yyy_processor_control)
(xxx_processor_set_default_priv, yyy_processor_set_info): Replace
routine declarations with skip directive.
* kern/ipc_host.c (xxx_processor_set_default_priv): Remove function.
* kern/machine.c (xxx_host_info, xxx_slot_info)
(xxx_cpu_control): Likewise.
* kern/syscall_emulation.c (xxx_task_set_emulation_vector)
(xxx_task_get_emulation_vector): Likewise.
* vm/memory_object.c (xxx_memory_object_lock_request): Likewise.
|
|
Mach no longer uses any of the old and clashing errno E* codes, so
it's safe to use them now w/o namespacing. This also means one less
modification needed to the Linux code.
* linux/dev/include/asm-i386/errno.h: Remove file.
* linux/dev/kernel/dma.c (notifier_chain_unregister) [MACH_INCLUDE]: Remove
code.
* linux/dev/include/linux/notifier.h: Likewise.
* linux/dev/arch/i386/kernel/irq.c (setup_x86_irq): Rename LINUX_EBUSY
to EBUSY.
(request_irq): Rename LINUX_EINVAL to EINVAL.
* linux/dev/glue/block.c (register_blkdev): Rename LINUX_EBUSY to EBUSY
and LINUX_EINVAL to EINVAL.
(unregister_blkdev): Rename LINUX_EINVAL to EINVAL.
(rdwr_partial) Rename LINUX_ENOMEM to ENOMEM and LINUX_EIO to EIO.
* linux/dev/glue/misc.c (linux_to_mach_error): Rename LINUX_EPERM to
EPERM, LINUX_EIO to EIO, LINUX_ENXIO to ENXIO, LINUX_EACCES to EACCES,
LINUX_EFAULT to EFAULT, LINUX_EBUSY to EBUSY, LINUX_EINVAL to EINVAL,
LINUX_EROFS to EROFS, LINUX_EWOULDBLOCK to EWOULDBLOCK and LINUX_ENOMEM
to ENOMEM.
(verify_area): Rename LINUX_EFAULT to EFAULT.
* linux/dev/kernel/resource.c (check_region): Rename LINUX_EBUSY to
EBUSY.
* linux/dev/kernel/sched.c (__do_down): Rename LINUX_EINTR to EINTR.
|
|
* device/errno.h: Remove file.
* Makefrag.am (libkernel_a_SOURCES): Remove `device/errno.h'.
* i386/i386at/com.c: Include <device/device_types.h> instead of
<device/errno.h>.
(comopen): Replace ENXIO with D_NO_SUCH_DEVICE.
* i386/i386at/kd_event.c: Include <device/device_types.h> instead of
<device/errno.h>.
* i386/i386at/kd_mouse.c: Likewise.
(mouseopen): Replace ENODEV with D_NO_SUCH_DEVICE and EBUSY with
D_ALREADY_OPEN.
* i386/i386at/lpr.c: Include <device/device_types.h> instead of
<device/errno.h>.
(lpropen): Replace ENXIO with D_NO_SUCH_DEVICE and EBUSY with
D_ALREADY_OPEN.
|
|
Otherwise the function wrongly uses the global symbol.
* linux/src/drivers/scsi/ppa.c (ppa_nibble_in): Rename `str_p' argument
to `base'.
|
|
* linux/src/drivers/scsi/gdth.c (gdth_detect): Conditionalize `b' on
[LINUX_VERSION_CODE < 0x020000]. Do not preset it to 0, it's initialized
later on when needed.
|
|
* linux/dev/drivers/block/floppy.c (setup_rw_floppy): Remove `dflags'.
(floppy_eject): Remove `dummy'.
* linux/src/drivers/net/8390.c (ethdev_init): Remove `ei_local'.
* linux/src/drivers/scsi/ppa.c (ppa_detect): Remove `ppb'.
|
|
* linux/dev/glue/kmem.c (vfree): Cast `addr' argument on kfree_mem
function to vm_offset_t.
|
|
* kern/printf.h (vsnprintf): New prototype.
|
|
* linux/dev/init/main.c: Include <linux/pci.h>.
* linux/dev/kernel/printk.c: Include <kern/printf.h>.
|
|
* linux/Makefrag.am (liblinux_a_SOURCES): Add `linux/dev/glue/glue.h',
which appeared in commit 2b4bff9914d57bff600ac70194b8b1aab3485bee
("Fix declarations").
|
|
|
|
* i386/i386/pcb.c (stack_attach): Initialize ebp to 0.
|
|
interrupt.S now saves the IRQ on the stack to acknowledge it later.
* i386/i386/hardclock.c (hardclock): Add irq parameter.
* i386/i386at/kd.c (kdintr, kdcheckmagic): Remove regs parameter.
* i386/i386at/kd.h (kdintr): Likewise.
|
|
* configure.ac (AM_SILENT_RULES): Add silent rules support if available,
and disable it by default.
* Makefile.am (AWK_V, AWK_V_, AWK_V_0): New variables.
(NM_V, NM_V_, NM_V_0): Likewise.
(GZIP_V, GZIP_V_, GZIP_V_0): Likewise.
(MIGCOM_V, MIGCOM_V_, MIGCOM_V_0): Likewise.
(gnumach-undef): Use NM_V in front of NM.
(gnumach-undef-bad): Use AM_V_GEN in front of sed.
(clib-routines.o): Use AM_V_at in fron of undefined symbols check.
Use AM_V_CCLD in front of CCLD.
* Makefrag.am (gnumach.msgids): Use AM_V_GEN in front of cat.
* Makerules.am (%.symc): Use AWK_V in front of AWK.
(%.symc.o): Use AM_V_CC in front of COMPILE.
(%.h): Use AM_V_GEN in front of sed.
(%.gz): Use GZIP_V in front of GZIP.
* Makerules.mig.am (%.user.defs.c): Use AM_V_GEN in front of command.
(%.server.defs.c): Likewise.
(%.user.h %.user.c %.user.msgids): Use MIGCOM_V in front of MIGCOM.
(%.server.h %.server.c %.server.msgids): Likewise.
|
|
* i386/i386/locore.S (copyout): Remove RETRY() use from >=i486 variant. Move
copyout_ret and copyout_fail.
|
|
* i386/i386/locore.S (copyout): Add a >=i486 variant of copyout which uses
no loop, but simply retries rep mov.
|
|
* i386/i386/db_interface.c (db_write_bytes): If CPU has PGE feature, disable
CR4_PGE before enabling kernel page write access, and re-enable the former after
disabling the latter.
|
|
This fixes the kdb `break' command.
i386/i386/proc_reg.h (set_cr3): Add "memory" clobber.
|
|
* linux/src/drivers/scsi/wd7000.c (mail_out): Add `1' instead of
pre-incrementing self assigned variable.
* linux/src/drivers/net/de4x5.c (de4x5_sw_reset, de4x5_queue_pkt, de4x5_rx)
(de4x5_tx, de4x5_rx_ovfc, set_multicast_list, ping_media, mii_get_phy)
(de4x5_ioctl): Likewise.
* linux/src/drivers/net/depca.c (depca_rx, depca_tx, load_packet): Likewise.
|
|
* linux/dev/lib/vsprintf.c (linux_vsprintf): Use `int' when retrieving
a `short' through `va_arg'.
|
|
* include/mach/mach_types.defs (thread_info_t): Change from array of
natural_t to integer_t.
(task_info_t): Likewise.
(host_info_t): Likewise.
(processor_info_t): Likewise.
(processor_set_info_t): Likewise.
|
|
* linux/src/include/linux/init.h: Include <linux/compiler.h>.
(__exitused): New macro.
(__exit): Define to ` __exitused __cold notrace'.
* linux/src/include/linux/kcomp.h (__exit): Remove.
|
|
* linux/pcmcia-cs/include/linux/init.h: Move to ...
* linux/src/include/linux/init.h: ... here.
|
|
* linux/src/include/linux/compiler.h: New file.
* linux/src/include/linux/compiler-gcc.h: Likewise.
* linux/src/include/linux/compiler-gcc3.h: Likewise.
* linux/src/include/linux/compiler-gcc4.h: Likewise.
* linux/dev/include/linux/kernel.h (barrier): Remove definition and
include <linux/compiler.h> instead.
|
|
* linux/src/include/linux/ctype.h: Update file.
* linux/src/lib/ctype.c: Likewise.
|
|
* linux/src/include/asm-i386/string-486.h: Remove.
|
|
* include/string.h (memcmp): Remove bogus `*' from return type.
|
|
* device/ds_routines.h (io_done_list): Add variable declaration.
(device_io_map): Keep variable declaration and move definition to...
* device/ds_routines.c: ... here.
* i386/i386/fpu.c: Include <i386/pic.h>
(curr_ipl): Remove declaration.
(fpintr): Add int unit parameter.
* linux/dev/glue/glue.h: New header.
* i386/i386/fpu.h (fpintr): Add function prototype.
* i386/i386/hardclock.c (clock_interrupt, linux_timer_intr): Remove prototypes.
[LINUX_DEV]: Include <linux/dev/glue/glue.h>
* i386/i386/ipl.h (curr_ipl): Add declaration.
* i386/i386/pic.h (curr_pic_mask, pic_mask, prtnull, intnull): Add
declarations.
* i386/i386at/kd.h (kdintr): Add declaration.
* i386/i386at/pic_isa.c: Include <i386/fpu.h> and <i386at/kd.h>
(intnull, fpintr, hardclock, kdintr, prtnull): Remove prototypes.
* i386/xen/xen.c: Include <kern/mach_clock.h>
(clock_interrupt): Remove prototype.
* linux/dev/arch/i386/kernel/irq.c: Include <linux/dev/glue/glue.h> and
<machine/machspl.h>
(linux_timer_intr, splhigh, spl0, curr_ipl, curr_pic_mask, pic_mask,
get_options): Remove declarations.
* linux/dev/drivers/block/floppy.c: Include <linux/dev/glue/glue.h>
(issig, get_options): Remove declarations.
* linux/dev/drivers/block/genhd.c: Include <linux/dev/glue/glue.h>
(linux_intr_pri): Remove declaration.
* linux/dev/glue/block.c: Include <devices/ds_routines.h> and
<linux/dev/glue/glue.h>.
(device_io_map, blksize_size): Remove declarations.
* linux/dev/glue/kmem.c: Include <kern/printf.h> and <linux/dev/glue/glue.h>
(alloc_contig_mem, printf): Remove declarations.
* linux/dev/glue/misc.c: Include <printf.h> and <linux/dev/glue/glue.h>
(vm_map_lookup_entry, printf): Remove prototypes.
* linux/dev/glue/net.c: Include <kern/printf.h>, <device/ds_routines.h> and
<linux/dev/glue/glue.h>.
(linux_intr_pri, io_done_list): Remove declarations.
* linux/dev/init/main.c: Include <machine/model_dep.h> and
<linux/dev/glue/glue.h>.
(phys_last_addr, alloc_contig_mem, free_contig_mem, init_IRQ,
restore_IRQ, startrtclock, linux_version_init, linux_kmem_init, pci_init,
linux_net_emulation_init, device_setup, linux_printk, linux_timer_intr, spl0,
splhigh, form_pic_mask, linux_bad_intr, prtnull, intnull, linux_sched_init,
pcmcia_init): Remove declarations.
* linux/dev/kernel/sched.c: Include <kern/printf.h>, <machine/machspl.h> and
<linux/dev/glue/glue.h>.
(alloc_contig_mem, free_contig_mem, splhigh, splx, linux_soft_intr, issig,
printf, linux_auto_config): Remove prototypes.
* linux/dev/kernel/softirq.c: Include <linux/dev/glue/glue.h>.
* linux/src/drivers/block/floppy.c: Include <linux/dev/glue/glue.h>.
(get_options): Remove prototype.
* linux/src/init/main.c: Include <linux/dev/glue/glue.h>
(init_IRQ): Remove prototype.
|
|
* i386/i386/hardclock.c [LINUX_DEV] (linux_timer_intr): New prototype.
|
|
* device/dev_pager.c: Include <device/memory_object_reply.user.h>.
* linux/pcmcia-cs/glue/wireless_glue.h: Include <kern/debug.h>.
|
|
* i386/i386at/rtc.c (rtc): Remove variable.
|
|
* linux/dev/glue/misc.c (do_gettimeofday): Cast arguments to
`host_get_time'.
|
|
* kern/mach_clock.h (timer_func_t): New function type.
(struct timer_elt): Change fcn type to timer_func_t.
* i386/i386at/com.c (comstart): Cast `ttrstrt' to `timer_funct_t *' in
`timeout' call.
* i386/i386at/lpr.c (lprstart): Likewise,
|
|
* i386/i386at/com.c (comcnprobe, comcninit, comcnputc): Return 0.
|
|
I have assigned copyright to the Free Software Foundation.
* i386/i386/xen.h: Fix copyright assignment
* i386/xen/xen.c: Likewise.
* i386/xen/xen_boothdr.S: Likewise.
* i386/xen/xen_locore.S: Likewise.
* include/mach/xen.h: Likewise.
* xen/block.c: Likewise.
* xen/block.h: Likewise.
* xen/console.c: Likewise.
* xen/console.h: Likewise.
* xen/evt.c: Likewise.
* xen/evt.h: Likewise.
* xen/grant.c: Likewise.
* xen/grant.h: Likewise.
* xen/net.c: Likewise.
* xen/net.h: Likewise.
* xen/ring.c: Likewise.
* xen/ring.h: Likewise.
* xen/store.c: Likewise.
* xen/store.h: Likewise.
* xen/time.c: Likewise.
* xen/time.h: Likewise.
* xen/xen.c: Likewise.
* xen/xen.h: Likewise.
|
|
* device/cons.h: Add multiple inclusion _DEVICE_CONS_H macro protector.
(struct consdev): Add function members prototypes.
* i386/i386/xen.h: Include <mach/xen.h>.
* i386/i386at/com.c (comcnprobe, comcninit, comcngetc, comcnputc): Move
prototypes...
* i386/i386at/com.h: ... here. Include <device/cons.h>.
* i386/i386at/cons_conf.c [MACH_HYP]: Include <xen/console.h>.
[!MACH_HYP]: Include "kd.h".
[!MACH_HYP && NCOM > 0]: Include "com.h".
(hypcnprobe, hypcninit, hypcngetc, hypcnputc, kdcnprobe, kdcninit, kdcngetc,
kdcnputc comcnprobe, comcninit, comcngetc, comcnputc): Remove prototypes.
* i386/i386at/kd.c (kdcnputc): Make it return int, -1 on error, 0 on
success.
(kdcnprobe, kdcninit, kdcngetc, kdcnputc): Move prototypes...
* i386/i386at/kd.h: ... here. Include <device/cons.h>.
* xen/console.c (hypcnprobe): Remove unused `my_console' local variable.
* xen/console.h: Include <device/cons.h>
(hypcnputc, hypcngetc, hypcnprobe, hypcninit): Add prototypes.
|