diff options
Diffstat (limited to 'scsi/adapters/scsi_5380.h')
| -rw-r--r-- | scsi/adapters/scsi_5380.h | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/scsi/adapters/scsi_5380.h b/scsi/adapters/scsi_5380.h new file mode 100644 index 0000000..12be922 --- /dev/null +++ b/scsi/adapters/scsi_5380.h @@ -0,0 +1,126 @@ +/* + * Mach Operating System + * Copyright (c) 1991,1990,1989 Carnegie Mellon University + * All Rights Reserved. + * + * Permission to use, copy, modify and distribute this software and its + * documentation is hereby granted, provided that both the copyright + * notice and this permission notice appear in all copies of the + * software, derivative works or modified versions, and any portions + * thereof, and that both notices appear in supporting documentation. + * + * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS + * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR + * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. + * + * Carnegie Mellon requests users of this software to return to + * + * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU + * School of Computer Science + * Carnegie Mellon University + * Pittsburgh PA 15213-3890 + * + * any improvements or extensions that they make and grant Carnegie the + * rights to redistribute these changes. + */ +/* + * File: scsi_5380.h + * Author: Alessandro Forin, Carnegie Mellon University + * Date: 5/91 + * + * Defines for the NCR 5380 (SCSI chip), aka Am5380 + */ + +/* + * Register map + */ + +typedef struct { + volatile unsigned char sci_data; /* r: Current data */ +#define sci_odata sci_data /* w: Out data */ + volatile unsigned char sci_icmd; /* rw: Initiator command */ + volatile unsigned char sci_mode; /* rw: Mode */ + volatile unsigned char sci_tcmd; /* rw: Target command */ + volatile unsigned char sci_bus_csr; /* r: Bus Status */ +#define sci_sel_enb sci_bus_csr /* w: Select enable */ + volatile unsigned char sci_csr; /* r: Status */ +#define sci_dma_send sci_csr /* w: Start dma send data */ + volatile unsigned char sci_idata; /* r: Input data */ +#define sci_trecv sci_idata /* w: Start dma receive, target */ + volatile unsigned char sci_iack; /* r: Interrupt Acknowledge */ +#define sci_irecv sci_iack /* w: Start dma receive, initiator */ +} sci_regmap_t; + + +/* + * Initiator command register + */ + +#define SCI_ICMD_DATA 0x01 /* rw: Assert data bus */ +#define SCI_ICMD_ATN 0x02 /* rw: Assert ATN signal */ +#define SCI_ICMD_SEL 0x04 /* rw: Assert SEL signal */ +#define SCI_ICMD_BSY 0x08 /* rw: Assert BSY signal */ +#define SCI_ICMD_ACK 0x10 /* rw: Assert ACK signal */ +#define SCI_ICMD_LST 0x20 /* r: Lost arbitration */ +#define SCI_ICMD_DIFF SCI_ICMD_LST /* w: Differential cable */ +#define SCI_ICMD_AIP 0x40 /* r: Arbitration in progress */ +#define SCI_ICMD_TEST SCI_ICMD_AIP /* w: Test mode */ +#define SCI_ICMD_RST 0x80 /* rw: Assert RST signal */ + + +/* + * Mode register + */ + +#define SCI_MODE_ARB 0x01 /* rw: Start arbitration */ +#define SCI_MODE_DMA 0x02 /* rw: Enable DMA xfers */ +#define SCI_MODE_MONBSY 0x04 /* rw: Monitor BSY signal */ +#define SCI_MODE_DMA_IE 0x08 /* rw: Enable DMA complete interrupt */ +#define SCI_MODE_PERR_IE 0x10 /* rw: Interrupt on parity errors */ +#define SCI_MODE_PAR_CHK 0x20 /* rw: Check parity */ +#define SCI_MODE_TARGET 0x40 /* rw: Target mode (Initiator if 0) */ +#define SCI_MODE_BLOCKDMA 0x80 /* rw: Block-mode DMA handshake (MBZ) */ + + +/* + * Target command register + */ + +#define SCI_TCMD_IO 0x01 /* rw: Assert I/O signal */ +#define SCI_TCMD_CD 0x02 /* rw: Assert C/D signal */ +#define SCI_TCMD_MSG 0x04 /* rw: Assert MSG signal */ +#define SCI_TCMD_PHASE_MASK 0x07 /* r: Mask for current bus phase */ +#define SCI_TCMD_REQ 0x08 /* rw: Assert REQ signal */ +#define SCI_TCMD_LAST_SENT 0x80 /* ro: Last byte was xferred + * (not on 5380/1) */ + +#define SCI_PHASE(x) SCSI_PHASE(x) + +/* + * Current (SCSI) Bus status + */ + +#define SCI_BUS_DBP 0x01 /* r: Data Bus parity */ +#define SCI_BUS_SEL 0x02 /* r: SEL signal */ +#define SCI_BUS_IO 0x04 /* r: I/O signal */ +#define SCI_BUS_CD 0x08 /* r: C/D signal */ +#define SCI_BUS_MSG 0x10 /* r: MSG signal */ +#define SCI_BUS_REQ 0x20 /* r: REQ signal */ +#define SCI_BUS_BSY 0x40 /* r: BSY signal */ +#define SCI_BUS_RST 0x80 /* r: RST signal */ + +#define SCI_CUR_PHASE(x) SCSI_PHASE((x)>>2) + +/* + * Bus and Status register + */ + +#define SCI_CSR_ACK 0x01 /* r: ACK signal */ +#define SCI_CSR_ATN 0x02 /* r: ATN signal */ +#define SCI_CSR_DISC 0x04 /* r: Disconnected (BSY==0) */ +#define SCI_CSR_PHASE_MATCH 0x08 /* r: Bus and SCI_TCMD match */ +#define SCI_CSR_INT 0x10 /* r: Interrupt request */ +#define SCI_CSR_PERR 0x20 /* r: Parity error */ +#define SCI_CSR_DREQ 0x40 /* r: DMA request */ +#define SCI_CSR_DONE 0x80 /* r: DMA count is zero */ + |