summaryrefslogtreecommitdiff
path: root/linux
diff options
context:
space:
mode:
Diffstat (limited to 'linux')
-rw-r--r--linux/dev/drivers/net/eepro100.c2284
-rw-r--r--linux/src/include/asm-i386/hardirq.h65
-rw-r--r--linux/src/include/asm-i386/spinlock.h262
-rw-r--r--linux/src/include/linux/compatmac.h152
-rw-r--r--linux/src/include/linux/spinlock.h4
5 files changed, 2767 insertions, 0 deletions
diff --git a/linux/dev/drivers/net/eepro100.c b/linux/dev/drivers/net/eepro100.c
new file mode 100644
index 0000000..802e7a4
--- /dev/null
+++ b/linux/dev/drivers/net/eepro100.c
@@ -0,0 +1,2284 @@
+/* drivers/net/eepro100.c: An Intel i82557-559 Ethernet driver for Linux. */
+/*
+ NOTICE: this version of the driver is supposed to work with 2.2 kernels.
+ Written 1996-1999 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU Public License, incorporated herein by reference.
+
+ This driver is for the Intel EtherExpress Pro100 (Speedo3) design.
+ It should work with all i82557/558/559 boards.
+
+ To use as a module, use the compile-command at the end of the file.
+
+ The author may be reached as becker@CESDIS.usra.edu, or C/O
+ Center of Excellence in Space Data and Information Sciences
+ Code 930.5, NASA Goddard Space Flight Center, Greenbelt MD 20771
+ For updates see
+ http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
+ For installation instructions
+ http://cesdis.gsfc.nasa.gov/linux/misc/modules.html
+ There is a Majordomo mailing list based at
+ linux-eepro100@cesdis.gsfc.nasa.gov
+
+ The driver also contains updates by different kernel developers.
+ This driver clone is maintained by Andrey V. Savochkin <saw@saw.sw.com.sg>.
+ Please use this email address and linux-kernel mailing list for bug reports.
+
+ Modification history:
+ 2000 Mar 24 Dragan Stancevic <visitor@valinux.com>
+ Disabled FC and ER, to avoid lockups when when we get FCP interrupts.
+ 2000 May 27 Andrey Moruga <moruga@sw.com.sg>
+ Code duplication for 82559ER support was removed.
+ Accurate handling of all supported chips was implemented.
+ Some fixes in 2.3 clone of the driver were ported.
+ 2000 May 30 Dragan Stancevic <visitor@valinux.com> and
+ Andrey Moruga <moruga@sw.com.sg>
+ Honor PortReset timing specification.
+ 2000 Jul 25 Dragan Stancevic <visitor@valinux.com>
+ Changed to MMIO, resized FIFOs, resized rings, changed ISR timeout
+ Problem reported by:
+ Marc MERLIN <merlin@valinux.com>
+ 2000 Nov 15 Dragan Stancevic <visitor@valinux.com>
+ Changed command completion time and added debug info as to which
+ CMD timed out. Problem reported by:
+ "Ulrich Windl" <Ulrich.Windl@rz.uni-regensburg.de>
+*/
+
+#define USE_IO
+static const char *version =
+"eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html\n"
+"eepro100.c: $Revision: 1.1 $ 2000/05/31 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others\n"
+"eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15\n";
+
+/* A few user-configurable values that apply to all boards.
+ First set is undocumented and spelled per Intel recommendations. */
+
+static int congenb = 0; /* Enable congestion control in the DP83840. */
+static int txfifo = 0; /* Tx FIFO threshold in 4 byte units, 0-15 */
+static int rxfifo = 0xF; /* Rx FIFO threshold, default 32 bytes. */
+/* Tx/Rx DMA burst length, 0-127, 0 == no preemption, tx==128 -> disabled. */
+static int txdmacount = 128;
+static int rxdmacount = 0;
+
+/* Set the copy breakpoint for the copy-only-tiny-buffer Rx method.
+ Lower values use more memory, but are faster. */
+#if defined(__alpha__) || defined(__sparc__)
+/* force copying of all packets to avoid unaligned accesses on Alpha */
+static int rx_copybreak = 1518;
+#else
+static int rx_copybreak = 200;
+#endif
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 200;
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast) */
+static int multicast_filter_limit = 64;
+
+/* 'options' is used to pass a transceiver override or full-duplex flag
+ e.g. "options=16" for FD, "options=32" for 100mbps-only. */
+static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+#ifdef MODULE
+static int debug = -1; /* The debug level */
+#endif
+
+/* A few values that may be tweaked. */
+/* The ring sizes should be a power of two for efficiency. */
+#define TX_RING_SIZE 64
+#define RX_RING_SIZE 64
+/* How much slots multicast filter setup may take.
+ Do not descrease without changing set_rx_mode() implementaion. */
+#define TX_MULTICAST_SIZE 2
+#define TX_MULTICAST_RESERV (TX_MULTICAST_SIZE*2)
+/* Actual number of TX packets queued, must be
+ <= TX_RING_SIZE-TX_MULTICAST_RESERV. */
+#define TX_QUEUE_LIMIT (TX_RING_SIZE-TX_MULTICAST_RESERV)
+/* Hysteresis marking queue as no longer full. */
+#define TX_QUEUE_UNFULL (TX_QUEUE_LIMIT-4)
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+/* Size of an pre-allocated Rx buffer: <Ethernet MTU> + slack.*/
+#define PKT_BUF_SZ 1536
+
+#if !defined(__OPTIMIZE__) || !defined(__KERNEL__)
+#warning You must compile this file with the correct options!
+#warning See the last lines of the source file.
+#error You must compile this driver with "-O".
+#endif
+
+#include <linux/version.h>
+#include <linux/module.h>
+#if defined(MODVERSIONS)
+#include <linux/modversions.h>
+#endif
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/malloc.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/compatmac.h>
+#include <asm/spinlock.h>
+#include <asm/processor.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+/* #include <asm/unaligned.h> */
+/* #include <asm/byteorder.h> */
+#define __LITTLE_ENDIAN
+#include <asm/hardirq.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+
+#if defined(MODULE) && (LINUX_VERSION_CODE > 0x20115)
+MODULE_AUTHOR("Maintainer: Andrey V. Savochkin <saw@saw.sw.com.sg>");
+MODULE_DESCRIPTION("Intel i82557/i82558 PCI EtherExpressPro driver");
+MODULE_PARM(debug, "i");
+MODULE_PARM(options, "1-" __MODULE_STRING(8) "i");
+MODULE_PARM(full_duplex, "1-" __MODULE_STRING(8) "i");
+MODULE_PARM(congenb, "i");
+MODULE_PARM(txfifo, "i");
+MODULE_PARM(rxfifo, "i");
+MODULE_PARM(txdmacount, "i");
+MODULE_PARM(rxdmacount, "i");
+MODULE_PARM(rx_copybreak, "i");
+MODULE_PARM(max_interrupt_work, "i");
+MODULE_PARM(multicast_filter_limit, "i");
+#endif
+
+#if (LINUX_VERSION_CODE >= 0x20100)
+static char kernel_version[] = UTS_RELEASE;
+#endif
+
+#if LINUX_VERSION_CODE < 0x20123
+#define hard_smp_processor_id() smp_processor_id()
+#define test_and_set_bit(val, addr) set_bit(val, addr)
+#define le16_to_cpu(val) (val)
+#define le32_to_cpu(val) (val)
+#define cpu_to_le32(val) (val)
+#define cpu_to_le16(val) (val)
+#endif
+#if LINUX_VERSION_CODE <= 0x20139
+#define net_device_stats enet_statistics
+#else
+#define NETSTATS_VER2
+#endif
+#if LINUX_VERSION_CODE < 0x20155
+/* Grrrr, the PCI code changed, but did not consider CardBus... */
+#include <linux/bios32.h>
+#define PCI_SUPPORT_VER1
+#else
+#define PCI_SUPPORT_VER2
+#endif
+#if LINUX_VERSION_CODE < 0x20159
+#define dev_free_skb(skb) dev_kfree_skb(skb, FREE_WRITE);
+#else
+#define dev_free_skb(skb) dev_kfree_skb(skb);
+#endif
+#if ! defined(CAP_NET_ADMIN)
+#define capable(CAP_XXX) (suser())
+#endif
+
+#define RUN_AT(x) (jiffies + (x))
+/* Condensed bus+endian portability operations. */
+#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
+#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
+
+#define net_device device
+#define pci_base_address(p, n) (p)->base_address[n]
+
+#define netif_wake_queue(dev) do { \
+ clear_bit(0, (void*)&dev->tbusy); \
+ mark_bh(NET_BH); \
+ } while(0)
+#define netif_start_queue(dev) clear_bit(0, (void*)&dev->tbusy)
+#define netif_stop_queue(dev) set_bit(0, (void*)&dev->tbusy)
+#ifndef PCI_DEVICE_ID_INTEL_82559ER
+#define PCI_DEVICE_ID_INTEL_82559ER 0x1209
+#endif
+#ifndef PCI_DEVICE_ID_INTEL_ID1029
+#define PCI_DEVICE_ID_INTEL_ID1029 0x1029
+#endif
+#ifndef PCI_DEVICE_ID_INTEL_ID1030
+#define PCI_DEVICE_ID_INTEL_ID1030 0x1030
+#endif
+#ifndef PCI_DEVICE_ID_INTEL_ID2449
+#define PCI_DEVICE_ID_INTEL_ID2449 0x2449
+#endif
+
+/* The total I/O port extent of the board.
+ The registers beyond 0x18 only exist on the i82558. */
+#define SPEEDO3_TOTAL_SIZE 0x20
+
+int speedo_debug = 1;
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the Intel i82557 "Speedo3" chip, Intel's
+single-chip fast Ethernet controller for PCI, as used on the Intel
+EtherExpress Pro 100 adapter.
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board. The system BIOS should be set to assign the
+PCI INTA signal to an otherwise unused system IRQ line. While it's
+possible to share PCI interrupt lines, it negatively impacts performance and
+only recent kernels support it.
+
+III. Driver operation
+
+IIIA. General
+The Speedo3 is very similar to other Intel network chips, that is to say
+"apparently designed on a different planet". This chips retains the complex
+Rx and Tx descriptors and multiple buffers pointers as previous chips, but
+also has simplified Tx and Rx buffer modes. This driver uses the "flexible"
+Tx mode, but in a simplified lower-overhead manner: it associates only a
+single buffer descriptor with each frame descriptor.
+
+Despite the extra space overhead in each receive skbuff, the driver must use
+the simplified Rx buffer mode to assure that only a single data buffer is
+associated with each RxFD. The driver implements this by reserving space
+for the Rx descriptor at the head of each Rx skbuff.
+
+The Speedo-3 has receive and command unit base addresses that are added to
+almost all descriptor pointers. The driver sets these to zero, so that all
+pointer fields are absolute addresses.
+
+The System Control Block (SCB) of some previous Intel chips exists on the
+chip in both PCI I/O and memory space. This driver uses the I/O space
+registers, but might switch to memory mapped mode to better support non-x86
+processors.
+
+IIIB. Transmit structure
+
+The driver must use the complex Tx command+descriptor mode in order to
+have a indirect pointer to the skbuff data section. Each Tx command block
+(TxCB) is associated with two immediately appended Tx Buffer Descriptor
+(TxBD). A fixed ring of these TxCB+TxBD pairs are kept as part of the
+speedo_private data structure for each adapter instance.
+
+The newer i82558 explicitly supports this structure, and can read the two
+TxBDs in the same PCI burst as the TxCB.
+
+This ring structure is used for all normal transmit packets, but the
+transmit packet descriptors aren't long enough for most non-Tx commands such
+as CmdConfigure. This is complicated by the possibility that the chip has
+already loaded the link address in the previous descriptor. So for these
+commands we convert the next free descriptor on the ring to a NoOp, and point
+that descriptor's link to the complex command.
+
+An additional complexity of these non-transmit commands are that they may be
+added asynchronous to the normal transmit queue, so we disable interrupts
+whenever the Tx descriptor ring is manipulated.
+
+A notable aspect of these special configure commands is that they do
+work with the normal Tx ring entry scavenge method. The Tx ring scavenge
+is done at interrupt time using the 'dirty_tx' index, and checking for the
+command-complete bit. While the setup frames may have the NoOp command on the
+Tx ring marked as complete, but not have completed the setup command, this
+is not a problem. The tx_ring entry can be still safely reused, as the
+tx_skbuff[] entry is always empty for config_cmd and mc_setup frames.
+
+Commands may have bits set e.g. CmdSuspend in the command word to either
+suspend or stop the transmit/command unit. This driver always flags the last
+command with CmdSuspend, erases the CmdSuspend in the previous command, and
+then issues a CU_RESUME.
+Note: Watch out for the potential race condition here: imagine
+ erasing the previous suspend
+ the chip processes the previous command
+ the chip processes the final command, and suspends
+ doing the CU_RESUME
+ the chip processes the next-yet-valid post-final-command.
+So blindly sending a CU_RESUME is only safe if we do it immediately after
+after erasing the previous CmdSuspend, without the possibility of an
+intervening delay. Thus the resume command is always within the
+interrupts-disabled region. This is a timing dependence, but handling this
+condition in a timing-independent way would considerably complicate the code.
+
+Note: In previous generation Intel chips, restarting the command unit was a
+notoriously slow process. This is presumably no longer true.
+
+IIIC. Receive structure
+
+Because of the bus-master support on the Speedo3 this driver uses the new
+SKBUFF_RX_COPYBREAK scheme, rather than a fixed intermediate receive buffer.
+This scheme allocates full-sized skbuffs as receive buffers. The value
+SKBUFF_RX_COPYBREAK is used as the copying breakpoint: it is chosen to
+trade-off the memory wasted by passing the full-sized skbuff to the queue
+layer for all frames vs. the copying cost of copying a frame to a
+correctly-sized skbuff.
+
+For small frames the copying cost is negligible (esp. considering that we
+are pre-loading the cache with immediately useful header information), so we
+allocate a new, minimally-sized skbuff. For large frames the copying cost
+is non-trivial, and the larger copy might flush the cache of useful data, so
+we pass up the skbuff the packet was received into.
+
+IV. Notes
+
+Thanks to Steve Williams of Intel for arranging the non-disclosure agreement
+that stated that I could disclose the information. But I still resent
+having to sign an Intel NDA when I'm helping Intel sell their own product!
+
+*/
+
+/* This table drives the PCI probe routines. */
+static struct net_device *speedo_found1(struct pci_dev *pdev, int pci_bus,
+ int pci_devfn, long ioaddr,
+ int chip_idx, int card_idx);
+
+#ifdef USE_IO
+#define SPEEDO_IOTYPE PCI_USES_MASTER|PCI_USES_IO|PCI_ADDR1
+#define SPEEDO_SIZE 32
+#else
+#define SPEEDO_IOTYPE PCI_USES_MASTER|PCI_USES_MEM|PCI_ADDR0
+#define SPEEDO_SIZE 0x1000
+#endif
+
+enum pci_flags_bit {
+ PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
+ PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
+};
+struct pci_id_info {
+ const char *name;
+ u16 vendor_id, device_id;
+ int pci_index;
+} static pci_tbl[] = {
+ { "Intel PCI EtherExpress Pro100 82557",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82557,
+ 0
+ },
+ { "Intel PCI EtherExpress Pro100 82559ER",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559ER,
+ 0
+ },
+ { "Intel PCI EtherExpress Pro100 ID1029",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ID1029,
+ 0
+ },
+ { "Intel Corporation 82559 InBusiness 10/100",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ID1030,
+ 0
+ },
+ { "Intel PCI EtherExpress Pro100 82562EM",
+ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ID2449,
+ 0
+ },
+ {0,} /* 0 terminated list. */
+};
+
+static inline unsigned int io_inw(unsigned long port)
+{
+ return inw(port);
+}
+static inline void io_outw(unsigned int val, unsigned long port)
+{
+ outw(val, port);
+}
+
+#ifndef USE_IO
+#undef inb
+#undef inw
+#undef inl
+#undef outb
+#undef outw
+#undef outl
+#define inb readb
+#define inw readw
+#define inl readl
+#define outb writeb
+#define outw writew
+#define outl writel
+#endif
+
+/* How to wait for the command unit to accept a command.
+ Typically this takes 0 ticks. */
+static inline void wait_for_cmd_done(long cmd_ioaddr)
+{
+ int wait = 20000;
+ char cmd_reg1, cmd_reg2;
+ do ;
+ while((cmd_reg1 = inb(cmd_ioaddr)) && (--wait >= 0));
+
+ /* Last chance to change your mind --Dragan*/
+ if (wait < 0){
+ cmd_reg2 = inb(cmd_ioaddr);
+ if(cmd_reg2){
+ printk(KERN_ALERT "eepro100: cmd_wait for(%#2.2x) timedout with(%#2.2x)!\n",
+ cmd_reg1, cmd_reg2);
+
+ }
+ }
+
+}
+
+/* Offsets to the various registers.
+ All accesses need not be longword aligned. */
+enum speedo_offsets {
+ SCBStatus = 0, SCBCmd = 2, /* Rx/Command Unit command and status. */
+ SCBPointer = 4, /* General purpose pointer. */
+ SCBPort = 8, /* Misc. commands and operands. */
+ SCBflash = 12, SCBeeprom = 14, /* EEPROM and flash memory control. */
+ SCBCtrlMDI = 16, /* MDI interface control. */
+ SCBEarlyRx = 20, /* Early receive byte count. */
+};
+/* Commands that can be put in a command list entry. */
+enum commands {
+ CmdNOp = 0, CmdIASetup = 0x10000, CmdConfigure = 0x20000,
+ CmdMulticastList = 0x30000, CmdTx = 0x40000, CmdTDR = 0x50000,
+ CmdDump = 0x60000, CmdDiagnose = 0x70000,
+ CmdSuspend = 0x40000000, /* Suspend after completion. */
+ CmdIntr = 0x20000000, /* Interrupt after completion. */
+ CmdTxFlex = 0x00080000, /* Use "Flexible mode" for CmdTx command. */
+};
+/* Clear CmdSuspend (1<<30) avoiding interference with the card access to the
+ status bits. Previous driver versions used separate 16 bit fields for
+ commands and statuses. --SAW
+ */
+#if defined(__LITTLE_ENDIAN)
+#define clear_suspend(cmd) ((__u16 *)&(cmd)->cmd_status)[1] &= ~0x4000
+#elif defined(__BIG_ENDIAN)
+#define clear_suspend(cmd) ((__u16 *)&(cmd)->cmd_status)[1] &= ~0x0040
+#else
+#error Unsupported byteorder
+#endif
+
+enum SCBCmdBits {
+ SCBMaskCmdDone=0x8000, SCBMaskRxDone=0x4000, SCBMaskCmdIdle=0x2000,
+ SCBMaskRxSuspend=0x1000, SCBMaskEarlyRx=0x0800, SCBMaskFlowCtl=0x0400,
+ SCBTriggerIntr=0x0200, SCBMaskAll=0x0100,
+ /* The rest are Rx and Tx commands. */
+ CUStart=0x0010, CUResume=0x0020, CUStatsAddr=0x0040, CUShowStats=0x0050,
+ CUCmdBase=0x0060, /* CU Base address (set to zero) . */
+ CUDumpStats=0x0070, /* Dump then reset stats counters. */
+ RxStart=0x0001, RxResume=0x0002, RxAbort=0x0004, RxAddrLoad=0x0006,
+ RxResumeNoResources=0x0007,
+};
+
+enum SCBPort_cmds {
+ PortReset=0, PortSelfTest=1, PortPartialReset=2, PortDump=3,
+};
+
+/* The Speedo3 Rx and Tx frame/buffer descriptors. */
+struct descriptor { /* A generic descriptor. */
+ s32 cmd_status; /* All command and status fields. */
+ u32 link; /* struct descriptor * */
+ unsigned char params[0];
+};
+
+/* The Speedo3 Rx and Tx buffer descriptors. */
+struct RxFD { /* Receive frame descriptor. */
+ s32 status;
+ u32 link; /* struct RxFD * */
+ u32 rx_buf_addr; /* void * */
+ u32 count;
+};
+
+/* Selected elements of the Tx/RxFD.status word. */
+enum RxFD_bits {
+ RxComplete=0x8000, RxOK=0x2000,
+ RxErrCRC=0x0800, RxErrAlign=0x0400, RxErrTooBig=0x0200, RxErrSymbol=0x0010,
+ RxEth2Type=0x0020, RxNoMatch=0x0004, RxNoIAMatch=0x0002,
+ TxUnderrun=0x1000, StatusComplete=0x8000,
+};
+
+struct TxFD { /* Transmit frame descriptor set. */
+ s32 status;
+ u32 link; /* void * */
+ u32 tx_desc_addr; /* Always points to the tx_buf_addr element. */
+ s32 count; /* # of TBD (=1), Tx start thresh., etc. */
+ /* This constitutes two "TBD" entries -- we only use one. */
+ u32 tx_buf_addr0; /* void *, frame to be transmitted. */
+ s32 tx_buf_size0; /* Length of Tx frame. */
+ u32 tx_buf_addr1; /* void *, frame to be transmitted. */
+ s32 tx_buf_size1; /* Length of Tx frame. */
+};
+
+/* Multicast filter setting block. --SAW */
+struct speedo_mc_block {
+ struct speedo_mc_block *next;
+ unsigned int tx;
+ struct descriptor frame __attribute__ ((__aligned__(16)));
+};
+
+/* Elements of the dump_statistics block. This block must be lword aligned. */
+struct speedo_stats {
+ u32 tx_good_frames;
+ u32 tx_coll16_errs;
+ u32 tx_late_colls;
+ u32 tx_underruns;
+ u32 tx_lost_carrier;
+ u32 tx_deferred;
+ u32 tx_one_colls;
+ u32 tx_multi_colls;
+ u32 tx_total_colls;
+ u32 rx_good_frames;
+ u32 rx_crc_errs;
+ u32 rx_align_errs;
+ u32 rx_resource_errs;
+ u32 rx_overrun_errs;
+ u32 rx_colls_errs;
+ u32 rx_runt_errs;
+ u32 done_marker;
+};
+
+enum Rx_ring_state_bits {
+ RrNoMem=1, RrPostponed=2, RrNoResources=4, RrOOMReported=8,
+};
+
+/* Do not change the position (alignment) of the first few elements!
+ The later elements are grouped for cache locality. */
+struct speedo_private {
+ struct TxFD tx_ring[TX_RING_SIZE]; /* Commands (usually CmdTxPacket). */
+ struct RxFD *rx_ringp[RX_RING_SIZE]; /* Rx descriptor, used as ring. */
+ /* The addresses of a Tx/Rx-in-place packets/buffers. */
+ struct sk_buff* tx_skbuff[TX_RING_SIZE];
+ struct sk_buff* rx_skbuff[RX_RING_SIZE];
+ struct descriptor *last_cmd; /* Last command sent. */
+ unsigned int cur_tx, dirty_tx; /* The ring entries to be free()ed. */
+ spinlock_t lock; /* Group with Tx control cache line. */
+ u32 tx_threshold; /* The value for txdesc.count. */
+ struct RxFD *last_rxf; /* Last command sent. */
+ unsigned int cur_rx, dirty_rx; /* The next free ring entry */
+ long last_rx_time; /* Last Rx, in jiffies, to handle Rx hang. */
+ const char *product_name;
+ struct net_device *next_module;
+ void *priv_addr; /* Unaligned address for kfree */
+ struct enet_statistics stats;
+ struct speedo_stats lstats;
+ int chip_id;
+ unsigned char pci_bus, pci_devfn, acpi_pwr;
+ struct timer_list timer; /* Media selection timer. */
+ struct speedo_mc_block *mc_setup_head;/* Multicast setup frame list head. */
+ struct speedo_mc_block *mc_setup_tail;/* Multicast setup frame list tail. */
+ int in_interrupt; /* Word-aligned dev->interrupt */
+ char rx_mode; /* Current PROMISC/ALLMULTI setting. */
+ unsigned int tx_full:1; /* The Tx queue is full. */
+ unsigned int full_duplex:1; /* Full-duplex operation requested. */
+ unsigned int flow_ctrl:1; /* Use 802.3x flow control. */
+ unsigned int rx_bug:1; /* Work around receiver hang errata. */
+ unsigned int rx_bug10:1; /* Receiver might hang at 10mbps. */
+ unsigned int rx_bug100:1; /* Receiver might hang at 100mbps. */
+ unsigned char default_port:8; /* Last dev->if_port value. */
+ unsigned char rx_ring_state; /* RX ring status flags. */
+ unsigned short phy[2]; /* PHY media interfaces available. */
+ unsigned short advertising; /* Current PHY advertised caps. */
+ unsigned short partner; /* Link partner caps. */
+};
+
+/* The parameters for a CmdConfigure operation.
+ There are so many options that it would be difficult to document each bit.
+ We mostly use the default or recommended settings. */
+const char i82557_config_cmd[22] = {
+ 22, 0x08, 0, 0, 0, 0, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */
+ 0, 0x2E, 0, 0x60, 0,
+ 0xf2, 0x48, 0, 0x40, 0xf2, 0x80, /* 0x40=Force full-duplex */
+ 0x3f, 0x05, };
+const char i82558_config_cmd[22] = {
+ 22, 0x08, 0, 1, 0, 0, 0x22, 0x03, 1, /* 1=Use MII 0=Use AUI */
+ 0, 0x2E, 0, 0x60, 0x08, 0x88,
+ 0x68, 0, 0x40, 0xf2, 0x84, /* Disable FC */
+ 0x31, 0x05, };
+
+/* PHY media interface chips. */
+static const char *phys[] = {
+ "None", "i82553-A/B", "i82553-C", "i82503",
+ "DP83840", "80c240", "80c24", "i82555",
+ "unknown-8", "unknown-9", "DP83840A", "unknown-11",
+ "unknown-12", "unknown-13", "unknown-14", "unknown-15", };
+enum phy_chips { NonSuchPhy=0, I82553AB, I82553C, I82503, DP83840, S80C240,
+ S80C24, I82555, DP83840A=10, };
+static const char is_mii[] = { 0, 1, 1, 0, 1, 1, 0, 1 };
+#define EE_READ_CMD (6)
+
+static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len);
+static int mdio_read(long ioaddr, int phy_id, int location);
+static int mdio_write(long ioaddr, int phy_id, int location, int value);
+static int speedo_open(struct net_device *dev);
+static void speedo_resume(struct net_device *dev);
+static void speedo_timer(unsigned long data);
+static void speedo_init_rx_ring(struct net_device *dev);
+static void speedo_tx_timeout(struct net_device *dev);
+static int speedo_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void speedo_refill_rx_buffers(struct net_device *dev, int force);
+static int speedo_rx(struct net_device *dev);
+static void speedo_tx_buffer_gc(struct net_device *dev);
+static void speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int speedo_close(struct net_device *dev);
+static struct enet_statistics *speedo_get_stats(struct net_device *dev);
+static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+static void speedo_show_state(struct net_device *dev);
+
+
+
+#ifdef honor_default_port
+/* Optional driver feature to allow forcing the transceiver setting.
+ Not recommended. */
+static int mii_ctrl[8] = { 0x3300, 0x3100, 0x0000, 0x0100,
+ 0x2000, 0x2100, 0x0400, 0x3100};
+#endif
+
+/* A list of all installed Speedo devices, for removing the driver module. */
+static struct net_device *root_speedo_dev = NULL;
+
+int eepro100_init(void)
+{
+ int cards_found = 0;
+ int chip_idx;
+ struct pci_dev *pdev;
+ struct pci_dev rdev; pdev = &rdev;
+
+ if (! pcibios_present())
+ return cards_found;
+
+ for (chip_idx = 0; pci_tbl[chip_idx].name; chip_idx++) {
+ for (; pci_tbl[chip_idx].pci_index < 8; pci_tbl[chip_idx].pci_index++) {
+ unsigned char pci_bus, pci_device_fn, pci_latency;
+ unsigned long pciaddr;
+ long ioaddr;
+ int irq;
+
+ u16 pci_command, new_command;
+
+ if (pcibios_find_device(pci_tbl[chip_idx].vendor_id,
+ pci_tbl[chip_idx].device_id,
+ pci_tbl[chip_idx].pci_index, &pci_bus,
+ &pci_device_fn))
+ break;
+ {
+#if defined(PCI_SUPPORT_VER2)
+ pdev = pci_find_slot(pci_bus, pci_device_fn);
+#ifdef USE_IO
+ pciaddr = pci_base_address(pdev, 1); /* Use [0] to mem-map */
+#else
+ pciaddr = pci_base_address(pdev, 0);
+#endif
+ irq = pdev->irq;
+#else
+ u32 pci_ioaddr;
+ u8 pci_irq_line;
+#ifdef USE_IO
+ pcibios_read_config_dword(pci_bus, pci_device_fn,
+ PCI_BASE_ADDRESS_1, &pci_ioaddr);
+#else
+ pcibios_read_config_dword(pci_bus, pci_device_fn,
+ PCI_BASE_ADDRESS_0, &pci_ioaddr);
+#endif
+ pcibios_read_config_byte(pci_bus, pci_device_fn,
+ PCI_INTERRUPT_LINE, &pci_irq_line);
+ pciaddr = pci_ioaddr;
+ irq = pci_irq_line;
+ pdev->irq = irq;
+#endif
+ }
+ /* Remove I/O space marker in bit 0. */
+ if (pciaddr & 1) {
+ ioaddr = pciaddr & ~3UL;
+ if (check_region(ioaddr, 32))
+ continue;
+ } else {
+#ifdef __sparc__
+ /* ioremap is hosed in 2.2.x on Sparc. */
+ ioaddr = pciaddr & ~0xfUL;
+#else
+ if ((ioaddr = (long)ioremap(pciaddr & ~0xfUL, 0x1000)) == 0) {
+ printk(KERN_INFO "Failed to map PCI address %#lx.\n",
+ pciaddr);
+ continue;
+ }
+#endif
+ }
+ if (speedo_debug > 2)
+ printk("Found Intel i82557 PCI Speedo at I/O %#lx, IRQ %d.\n",
+ ioaddr, irq);
+
+ /* Get and check the bus-master and latency values. */
+ pcibios_read_config_word(pci_bus, pci_device_fn,
+ PCI_COMMAND, &pci_command);
+ new_command = pci_command | PCI_COMMAND_MASTER|PCI_COMMAND_IO;
+ if (pci_command != new_command) {
+ printk(KERN_INFO " The PCI BIOS has not enabled this"
+ " device! Updating PCI command %4.4x->%4.4x.\n",
+ pci_command, new_command);
+ pcibios_write_config_word(pci_bus, pci_device_fn,
+ PCI_COMMAND, new_command);
+ }
+ pcibios_read_config_byte(pci_bus, pci_device_fn,
+ PCI_LATENCY_TIMER, &pci_latency);
+ if (pci_latency < 32) {
+ printk(" PCI latency timer (CFLT) is unreasonably low at %d."
+ " Setting to 32 clocks.\n", pci_latency);
+ pcibios_write_config_byte(pci_bus, pci_device_fn,
+ PCI_LATENCY_TIMER, 32);
+ } else if (speedo_debug > 1)
+ printk(" PCI latency timer (CFLT) is %#x.\n", pci_latency);
+
+ if (speedo_found1(pdev, pci_bus, pci_device_fn, ioaddr, chip_idx, cards_found))
+ cards_found++;
+ }
+ }
+
+ return cards_found;
+}
+
+static struct net_device *speedo_found1(struct pci_dev *pdev, int pci_bus,
+ int pci_devfn, long ioaddr,
+ int chip_idx, int card_idx)
+{
+ struct net_device *dev;
+ struct speedo_private *sp;
+ const char *product;
+ int i, option;
+ u16 eeprom[0x100];
+ int acpi_idle_state = 0;
+#ifndef MODULE
+ static int did_version = 0; /* Already printed version info. */
+ if (speedo_debug > 0 && did_version++ == 0)
+ printk(version);
+#endif
+
+ dev = init_etherdev(NULL, sizeof(struct speedo_private));
+
+ if (dev->mem_start > 0)
+ option = dev->mem_start;
+ else if (card_idx >= 0 && options[card_idx] >= 0)
+ option = options[card_idx];
+ else
+ option = 0;
+
+ /* Read the station address EEPROM before doing the reset.
+ Nominally his should even be done before accepting the device, but
+ then we wouldn't have a device name with which to report the error.
+ The size test is for 6 bit vs. 8 bit address serial EEPROMs.
+ */
+ {
+ unsigned long iobase;
+ int read_cmd, ee_size;
+ u16 sum;
+ int j;
+
+ /* Use IO only to avoid postponed writes and satisfy EEPROM timing
+ requirements. */
+#if defined(PCI_SUPPORT_VER2)
+ iobase = pci_base_address(pdev, 1) & ~3UL;
+#else
+ {
+ u32 pci_ioaddr;
+ pcibios_read_config_dword(pci_bus, pci_devfn,
+ PCI_BASE_ADDRESS_1, &pci_ioaddr);
+ iobase = pci_ioaddr & ~3UL;
+ }
+#endif
+ if ((do_eeprom_cmd(iobase, EE_READ_CMD << 24, 27) & 0xffe0000)
+ == 0xffe0000) {
+ ee_size = 0x100;
+ read_cmd = EE_READ_CMD << 24;
+ } else {
+ ee_size = 0x40;
+ read_cmd = EE_READ_CMD << 22;
+ }
+
+ for (j = 0, i = 0, sum = 0; i < ee_size; i++) {
+ u16 value = do_eeprom_cmd(iobase, read_cmd | (i << 16), 27);
+ eeprom[i] = value;
+ sum += value;
+ if (i < 3) {
+ dev->dev_addr[j++] = value;
+ dev->dev_addr[j++] = value >> 8;
+ }
+ }
+ if (sum != 0xBABA)
+ printk(KERN_WARNING "%s: Invalid EEPROM checksum %#4.4x, "
+ "check settings before activating this device!\n",
+ dev->name, sum);
+ /* Don't unregister_netdev(dev); as the EEPro may actually be
+ usable, especially if the MAC address is set later.
+ On the other hand, it may be unusable if MDI data is corrupted. */
+ }
+
+ /* Reset the chip: stop Tx and Rx processes and clear counters.
+ This takes less than 10usec and will easily finish before the next
+ action. */
+ outl(PortReset, ioaddr + SCBPort);
+ inl(ioaddr + SCBPort);
+ /* Honor PortReset timing. */
+ udelay(10);
+
+ if (eeprom[3] & 0x0100)
+ product = "OEM i82557/i82558 10/100 Ethernet";
+ else
+ product = pci_tbl[chip_idx].name;
+
+ printk(KERN_INFO "%s: %s, ", dev->name, product);
+
+ for (i = 0; i < 5; i++)
+ printk("%2.2X:", dev->dev_addr[i]);
+ printk("%2.2X, ", dev->dev_addr[i]);
+#ifdef USE_IO
+ printk("I/O at %#3lx, ", ioaddr);
+#endif
+ printk("IRQ %d.\n", pdev->irq);
+
+#if 1 || defined(kernel_bloat)
+ /* OK, this is pure kernel bloat. I don't like it when other drivers
+ waste non-pageable kernel space to emit similar messages, but I need
+ them for bug reports. */
+ {
+ const char *connectors[] = {" RJ45", " BNC", " AUI", " MII"};
+ /* The self-test results must be paragraph aligned. */
+ s32 str[6], *volatile self_test_results;
+ int boguscnt = 16000; /* Timeout for set-test. */
+ if ((eeprom[3] & 0x03) != 0x03)
+ printk(KERN_INFO " Receiver lock-up bug exists -- enabling"
+ " work-around.\n");
+ printk(KERN_INFO " Board assembly %4.4x%2.2x-%3.3d, Physical"
+ " connectors present:",
+ eeprom[8], eeprom[9]>>8, eeprom[9] & 0xff);
+ for (i = 0; i < 4; i++)
+ if (eeprom[5] & (1<<i))
+ printk(connectors[i]);
+ printk("\n"KERN_INFO" Primary interface chip %s PHY #%d.\n",
+ phys[(eeprom[6]>>8)&15], eeprom[6] & 0x1f);
+ if (eeprom[7] & 0x0700)
+ printk(KERN_INFO " Secondary interface chip %s.\n",
+ phys[(eeprom[7]>>8)&7]);
+ if (((eeprom[6]>>8) & 0x3f) == DP83840
+ || ((eeprom[6]>>8) & 0x3f) == DP83840A) {
+ int mdi_reg23 = mdio_read(ioaddr, eeprom[6] & 0x1f, 23) | 0x0422;
+ if (congenb)
+ mdi_reg23 |= 0x0100;
+ printk(KERN_INFO" DP83840 specific setup, setting register 23 to %4.4x.\n",
+ mdi_reg23);
+ mdio_write(ioaddr, eeprom[6] & 0x1f, 23, mdi_reg23);
+ }
+ if ((option >= 0) && (option & 0x70)) {
+ printk(KERN_INFO " Forcing %dMbs %s-duplex operation.\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
+ mdio_write(ioaddr, eeprom[6] & 0x1f, 0,
+ ((option & 0x20) ? 0x2000 : 0) | /* 100mbps? */
+ ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+ }
+
+ /* Perform a system self-test. */
+ self_test_results = (s32*) ((((long) str) + 15) & ~0xf);
+ self_test_results[0] = 0;
+ self_test_results[1] = -1;
+ outl(virt_to_bus(self_test_results) | PortSelfTest, ioaddr + SCBPort);
+ do {
+ udelay(10);
+ } while (self_test_results[1] == -1 && --boguscnt >= 0);
+
+ if (boguscnt < 0) { /* Test optimized out. */
+ printk(KERN_ERR "Self test failed, status %8.8x:\n"
+ KERN_ERR " Failure to initialize the i82557.\n"
+ KERN_ERR " Verify that the card is a bus-master"
+ " capable slot.\n",
+ self_test_results[1]);
+ } else
+ printk(KERN_INFO " General self-test: %s.\n"
+ KERN_INFO " Serial sub-system self-test: %s.\n"
+ KERN_INFO " Internal registers self-test: %s.\n"
+ KERN_INFO " ROM checksum self-test: %s (%#8.8x).\n",
+ self_test_results[1] & 0x1000 ? "failed" : "passed",
+ self_test_results[1] & 0x0020 ? "failed" : "passed",
+ self_test_results[1] & 0x0008 ? "failed" : "passed",
+ self_test_results[1] & 0x0004 ? "failed" : "passed",
+ self_test_results[0]);
+ }
+#endif /* kernel_bloat */
+
+ outl(PortReset, ioaddr + SCBPort);
+ inl(ioaddr + SCBPort);
+ /* Honor PortReset timing. */
+ udelay(10);
+
+ /* We do a request_region() only to register /proc/ioports info. */
+ request_region(ioaddr, SPEEDO3_TOTAL_SIZE, "Intel Speedo3 Ethernet");
+
+ dev->base_addr = ioaddr;
+ dev->irq = pdev->irq;
+
+ sp = dev->priv;
+ if (dev->priv == NULL) {
+ void *mem = kmalloc(sizeof(*sp), GFP_KERNEL);
+ dev->priv = sp = mem; /* Cache align here if kmalloc does not. */
+ sp->priv_addr = mem;
+ }
+ memset(sp, 0, sizeof(*sp));
+ sp->next_module = root_speedo_dev;
+ root_speedo_dev = dev;
+
+ sp->pci_bus = pci_bus;
+ sp->pci_devfn = pci_devfn;
+ sp->chip_id = chip_idx;
+ sp->acpi_pwr = acpi_idle_state;
+
+ sp->full_duplex = option >= 0 && (option & 0x10) ? 1 : 0;
+ if (card_idx >= 0) {
+ if (full_duplex[card_idx] >= 0)
+ sp->full_duplex = full_duplex[card_idx];
+ }
+ sp->default_port = option >= 0 ? (option & 0x0f) : 0;
+
+ sp->phy[0] = eeprom[6];
+ sp->phy[1] = eeprom[7];
+ sp->rx_bug = (eeprom[3] & 0x03) == 3 ? 0 : 1;
+
+ if (sp->rx_bug)
+ printk(KERN_INFO " Receiver lock-up workaround activated.\n");
+
+ /* The Speedo-specific entries in the device structure. */
+ dev->open = &speedo_open;
+ dev->hard_start_xmit = &speedo_start_xmit;
+#if defined(HAS_NETIF_QUEUE)
+ dev->tx_timeout = &speedo_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+#endif
+ dev->stop = &speedo_close;
+ dev->get_stats = &speedo_get_stats;
+ dev->set_multicast_list = &set_rx_mode;
+ dev->do_ioctl = &speedo_ioctl;
+
+ return dev;
+}
+
+/* Serial EEPROM section.
+ A "bit" grungy, but we work our way through bit-by-bit :->. */
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
+#define EE_CS 0x02 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
+#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
+#define EE_ENB (0x4800 | EE_CS)
+#define EE_WRITE_0 0x4802
+#define EE_WRITE_1 0x4806
+#define EE_OFFSET SCBeeprom
+
+/* The fixes for the code were kindly provided by Dragan Stancevic
+ <visitor@valinux.com> to strictly follow Intel specifications of EEPROM
+ access timing.
+ The publicly available sheet 64486302 (sec. 3.1) specifies 1us access
+ interval for serial EEPROM. However, it looks like that there is an
+ additional requirement dictating larger udelay's in the code below.
+ 2000/05/24 SAW */
+static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len)
+{
+ unsigned retval = 0;
+ long ee_addr = ioaddr + SCBeeprom;
+
+ io_outw(EE_ENB, ee_addr); udelay(2);
+ io_outw(EE_ENB | EE_SHIFT_CLK, ee_addr); udelay(2);
+
+ /* Shift the command bits out. */
+ do {
+ short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
+ io_outw(dataval, ee_addr); udelay(2);
+ io_outw(dataval | EE_SHIFT_CLK, ee_addr); udelay(2);
+ retval = (retval << 1) | ((io_inw(ee_addr) & EE_DATA_READ) ? 1 : 0);
+ } while (--cmd_len >= 0);
+ io_outw(EE_ENB, ee_addr); udelay(2);
+
+ /* Terminate the EEPROM access. */
+ io_outw(EE_ENB & ~EE_CS, ee_addr);
+ return retval;
+}
+
+static int mdio_read(long ioaddr, int phy_id, int location)
+{
+ int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */
+ outl(0x08000000 | (location<<16) | (phy_id<<21), ioaddr + SCBCtrlMDI);
+ do {
+ val = inl(ioaddr + SCBCtrlMDI);
+ if (--boguscnt < 0) {
+ printk(KERN_ERR " mdio_read() timed out with val = %8.8x.\n", val);
+ break;
+ }
+ } while (! (val & 0x10000000));
+ return val & 0xffff;
+}
+
+static int mdio_write(long ioaddr, int phy_id, int location, int value)
+{
+ int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */
+ outl(0x04000000 | (location<<16) | (phy_id<<21) | value,
+ ioaddr + SCBCtrlMDI);
+ do {
+ val = inl(ioaddr + SCBCtrlMDI);
+ if (--boguscnt < 0) {
+ printk(KERN_ERR" mdio_write() timed out with val = %8.8x.\n", val);
+ break;
+ }
+ } while (! (val & 0x10000000));
+ return val & 0xffff;
+}
+
+
+static int
+speedo_open(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+
+ if (speedo_debug > 1)
+ printk(KERN_DEBUG "%s: speedo_open() irq %d.\n", dev->name, dev->irq);
+
+ MOD_INC_USE_COUNT;
+
+ /* Set up the Tx queue early.. */
+ sp->cur_tx = 0;
+ sp->dirty_tx = 0;
+ sp->last_cmd = 0;
+ sp->tx_full = 0;
+ sp->lock = (spinlock_t) SPIN_LOCK_UNLOCKED;
+ sp->in_interrupt = 0;
+
+ /* .. we can safely take handler calls during init. */
+ if (request_irq(dev->irq, &speedo_interrupt, SA_SHIRQ, dev->name, dev)) {
+ MOD_DEC_USE_COUNT;
+ return -EAGAIN;
+ }
+
+ dev->if_port = sp->default_port;
+
+#ifdef oh_no_you_dont_unless_you_honour_the_options_passed_in_to_us
+ /* Retrigger negotiation to reset previous errors. */
+ if ((sp->phy[0] & 0x8000) == 0) {
+ int phy_addr = sp->phy[0] & 0x1f ;
+ /* Use 0x3300 for restarting NWay, other values to force xcvr:
+ 0x0000 10-HD
+ 0x0100 10-FD
+ 0x2000 100-HD
+ 0x2100 100-FD
+ */
+#ifdef honor_default_port
+ mdio_write(ioaddr, phy_addr, 0, mii_ctrl[dev->default_port & 7]);
+#else
+ mdio_write(ioaddr, phy_addr, 0, 0x3300);
+#endif
+ }
+#endif
+
+ speedo_init_rx_ring(dev);
+
+ /* Fire up the hardware. */
+ outw(SCBMaskAll, ioaddr + SCBCmd);
+ speedo_resume(dev);
+
+ dev->interrupt = 0;
+ dev->start = 1;
+ netif_start_queue(dev);
+
+ /* Setup the chip and configure the multicast list. */
+ sp->mc_setup_head = NULL;
+ sp->mc_setup_tail = NULL;
+ sp->flow_ctrl = sp->partner = 0;
+ sp->rx_mode = -1; /* Invalid -> always reset the mode. */
+ set_rx_mode(dev);
+ if ((sp->phy[0] & 0x8000) == 0)
+ sp->advertising = mdio_read(ioaddr, sp->phy[0] & 0x1f, 4);
+
+ if (speedo_debug > 2) {
+ printk(KERN_DEBUG "%s: Done speedo_open(), status %8.8x.\n",
+ dev->name, inw(ioaddr + SCBStatus));
+ }
+
+ /* Set the timer. The timer serves a dual purpose:
+ 1) to monitor the media interface (e.g. link beat) and perhaps switch
+ to an alternate media type
+ 2) to monitor Rx activity, and restart the Rx process if the receiver
+ hangs. */
+ init_timer(&sp->timer);
+ sp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */
+ sp->timer.data = (unsigned long)dev;
+ sp->timer.function = &speedo_timer; /* timer handler */
+ add_timer(&sp->timer);
+
+ /* No need to wait for the command unit to accept here. */
+ if ((sp->phy[0] & 0x8000) == 0)
+ mdio_read(ioaddr, sp->phy[0] & 0x1f, 0);
+
+ return 0;
+}
+
+/* Start the chip hardware after a full reset. */
+static void speedo_resume(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+
+ /* Start with a Tx threshold of 256 (0x..20.... 8 byte units). */
+ sp->tx_threshold = 0x01208000;
+
+ /* Set the segment registers to '0'. */
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outl(0, ioaddr + SCBPointer);
+ /* impose a delay to avoid a bug */
+ inl(ioaddr + SCBPointer);
+ udelay(10);
+ outb(RxAddrLoad, ioaddr + SCBCmd);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outb(CUCmdBase, ioaddr + SCBCmd);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+
+ /* Load the statistics block and rx ring addresses. */
+ outl(virt_to_bus(&sp->lstats), ioaddr + SCBPointer);
+ outb(CUStatsAddr, ioaddr + SCBCmd);
+ sp->lstats.done_marker = 0;
+ wait_for_cmd_done(ioaddr + SCBCmd);
+
+ if (sp->rx_ringp[sp->cur_rx % RX_RING_SIZE] == NULL) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG "%s: NULL cur_rx in speedo_resume().\n",
+ dev->name);
+ } else {
+ outl(virt_to_bus(sp->rx_ringp[sp->cur_rx % RX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ outb(RxStart, ioaddr + SCBCmd);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ }
+
+ outb(CUDumpStats, ioaddr + SCBCmd);
+
+ /* Fill the first command with our physical address. */
+ {
+ struct descriptor *ias_cmd;
+
+ ias_cmd =
+ (struct descriptor *)&sp->tx_ring[sp->cur_tx++ % TX_RING_SIZE];
+ /* Avoid a bug(?!) here by marking the command already completed. */
+ ias_cmd->cmd_status = cpu_to_le32((CmdSuspend | CmdIASetup) | 0xa000);
+ ias_cmd->link =
+ virt_to_le32desc(&sp->tx_ring[sp->cur_tx % TX_RING_SIZE]);
+ memcpy(ias_cmd->params, dev->dev_addr, 6);
+ sp->last_cmd = ias_cmd;
+ }
+
+ /* Start the chip's Tx process and unmask interrupts. */
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outl(virt_to_bus(&sp->tx_ring[sp->dirty_tx % TX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ /* We are not ACK-ing FCP and ER in the interrupt handler yet so they should
+ remain masked --Dragan */
+ outw(CUStart | SCBMaskEarlyRx | SCBMaskFlowCtl, ioaddr + SCBCmd);
+}
+
+/* Media monitoring and control. */
+static void speedo_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int phy_num = sp->phy[0] & 0x1f;
+
+ /* We have MII and lost link beat. */
+ if ((sp->phy[0] & 0x8000) == 0) {
+ int partner = mdio_read(ioaddr, phy_num, 5);
+ if (partner != sp->partner) {
+ int flow_ctrl = sp->advertising & partner & 0x0400 ? 1 : 0;
+ if (speedo_debug > 2) {
+ printk(KERN_DEBUG "%s: Link status change.\n", dev->name);
+ printk(KERN_DEBUG "%s: Old partner %x, new %x, adv %x.\n",
+ dev->name, sp->partner, partner, sp->advertising);
+ }
+ sp->partner = partner;
+ if (flow_ctrl != sp->flow_ctrl) {
+ sp->flow_ctrl = flow_ctrl;
+ sp->rx_mode = -1; /* Trigger a reload. */
+ }
+ /* Clear sticky bit. */
+ mdio_read(ioaddr, phy_num, 1);
+ /* If link beat has returned... */
+ if (mdio_read(ioaddr, phy_num, 1) & 0x0004)
+ dev->flags |= IFF_RUNNING;
+ else
+ dev->flags &= ~IFF_RUNNING;
+ }
+ }
+ if (speedo_debug > 3) {
+ printk(KERN_DEBUG "%s: Media control tick, status %4.4x.\n",
+ dev->name, inw(ioaddr + SCBStatus));
+ }
+ if (sp->rx_mode < 0 ||
+ (sp->rx_bug && jiffies - sp->last_rx_time > 2*HZ)) {
+ /* We haven't received a packet in a Long Time. We might have been
+ bitten by the receiver hang bug. This can be cleared by sending
+ a set multicast list command. */
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG "%s: Sending a multicast list set command"
+ " from a timer routine.\n", dev->name);
+ set_rx_mode(dev);
+ }
+ /* We must continue to monitor the media. */
+ sp->timer.expires = RUN_AT(2*HZ); /* 2.0 sec. */
+ add_timer(&sp->timer);
+}
+
+static void speedo_show_state(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+#if 0
+ long ioaddr = dev->base_addr;
+ int phy_num = sp->phy[0] & 0x1f;
+#endif
+ int i;
+
+ /* Print a few items for debugging. */
+ if (speedo_debug > 0) {
+ int i;
+ printk(KERN_DEBUG "%s: Tx ring dump, Tx queue %u / %u:\n", dev->name,
+ sp->cur_tx, sp->dirty_tx);
+ for (i = 0; i < TX_RING_SIZE; i++)
+ printk(KERN_DEBUG "%s: %c%c%2d %8.8x.\n", dev->name,
+ i == sp->dirty_tx % TX_RING_SIZE ? '*' : ' ',
+ i == sp->cur_tx % TX_RING_SIZE ? '=' : ' ',
+ i, sp->tx_ring[i].status);
+ }
+ printk(KERN_DEBUG "%s: Printing Rx ring"
+ " (next to receive into %u, dirty index %u).\n",
+ dev->name, sp->cur_rx, sp->dirty_rx);
+
+ for (i = 0; i < RX_RING_SIZE; i++)
+ printk(KERN_DEBUG "%s: %c%c%c%2d %8.8x.\n", dev->name,
+ sp->rx_ringp[i] == sp->last_rxf ? 'l' : ' ',
+ i == sp->dirty_rx % RX_RING_SIZE ? '*' : ' ',
+ i == sp->cur_rx % RX_RING_SIZE ? '=' : ' ',
+ i, (sp->rx_ringp[i] != NULL) ?
+ (unsigned)sp->rx_ringp[i]->status : 0);
+
+#if 0
+ for (i = 0; i < 16; i++) {
+ /* FIXME: what does it mean? --SAW */
+ if (i == 6) i = 21;
+ printk(KERN_DEBUG "%s: PHY index %d register %d is %4.4x.\n",
+ dev->name, phy_num, i, mdio_read(ioaddr, phy_num, i));
+ }
+#endif
+
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void
+speedo_init_rx_ring(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ struct RxFD *rxf, *last_rxf = NULL;
+ int i;
+
+ sp->cur_rx = 0;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb;
+ skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
+ sp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break; /* OK. Just initially short of Rx bufs. */
+ skb->dev = dev; /* Mark as being used by this device. */
+ rxf = (struct RxFD *)skb->tail;
+ sp->rx_ringp[i] = rxf;
+ skb_reserve(skb, sizeof(struct RxFD));
+ if (last_rxf)
+ last_rxf->link = virt_to_le32desc(rxf);
+ last_rxf = rxf;
+ rxf->status = cpu_to_le32(0x00000001); /* '1' is flag value only. */
+ rxf->link = 0; /* None yet. */
+ /* This field unused by i82557. */
+ rxf->rx_buf_addr = 0xffffffff;
+ rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
+ }
+ sp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+ /* Mark the last entry as end-of-list. */
+ last_rxf->status = cpu_to_le32(0xC0000002); /* '2' is flag value only. */
+ sp->last_rxf = last_rxf;
+}
+
+static void speedo_purge_tx(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ int entry;
+
+ while ((int)(sp->cur_tx - sp->dirty_tx) > 0) {
+ entry = sp->dirty_tx % TX_RING_SIZE;
+ if (sp->tx_skbuff[entry]) {
+ sp->stats.tx_errors++;
+ dev_free_skb(sp->tx_skbuff[entry]);
+ sp->tx_skbuff[entry] = 0;
+ }
+ sp->dirty_tx++;
+ }
+ while (sp->mc_setup_head != NULL) {
+ struct speedo_mc_block *t;
+ if (speedo_debug > 1)
+ printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
+ }
+ sp->mc_setup_tail = NULL;
+ sp->tx_full = 0;
+ netif_wake_queue(dev);
+}
+
+static void reset_mii(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ /* Reset the MII transceiver, suggested by Fred Young @ scalable.com. */
+ if ((sp->phy[0] & 0x8000) == 0) {
+ int phy_addr = sp->phy[0] & 0x1f;
+ int advertising = mdio_read(ioaddr, phy_addr, 4);
+ int mii_bmcr = mdio_read(ioaddr, phy_addr, 0);
+ mdio_write(ioaddr, phy_addr, 0, 0x0400);
+ mdio_write(ioaddr, phy_addr, 1, 0x0000);
+ mdio_write(ioaddr, phy_addr, 4, 0x0000);
+ mdio_write(ioaddr, phy_addr, 0, 0x8000);
+#ifdef honor_default_port
+ mdio_write(ioaddr, phy_addr, 0, mii_ctrl[dev->default_port & 7]);
+#else
+ mdio_read(ioaddr, phy_addr, 0);
+ mdio_write(ioaddr, phy_addr, 0, mii_bmcr);
+ mdio_write(ioaddr, phy_addr, 4, advertising);
+#endif
+ }
+}
+
+static void speedo_tx_timeout(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int status = inw(ioaddr + SCBStatus);
+ unsigned long flags;
+
+ printk(KERN_WARNING "%s: Transmit timed out: status %4.4x "
+ " %4.4x at %d/%d command %8.8x.\n",
+ dev->name, status, inw(ioaddr + SCBCmd),
+ sp->dirty_tx, sp->cur_tx,
+ sp->tx_ring[sp->dirty_tx % TX_RING_SIZE].status);
+
+ /* Trigger a stats dump to give time before the reset. */
+ speedo_get_stats(dev);
+
+ speedo_show_state(dev);
+#if 0
+ if ((status & 0x00C0) != 0x0080
+ && (status & 0x003C) == 0x0010) {
+ /* Only the command unit has stopped. */
+ printk(KERN_WARNING "%s: Trying to restart the transmitter...\n",
+ dev->name);
+ outl(virt_to_bus(&sp->tx_ring[sp->dirty_tx % TX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ outw(CUStart, ioaddr + SCBCmd);
+ reset_mii(dev);
+ } else {
+#else
+ {
+#endif
+ start_bh_atomic();
+ /* Ensure that timer routine doesn't run! */
+ del_timer(&sp->timer);
+ end_bh_atomic();
+ /* Reset the Tx and Rx units. */
+ outl(PortReset, ioaddr + SCBPort);
+ /* We may get spurious interrupts here. But I don't think that they
+ may do much harm. 1999/12/09 SAW */
+ udelay(10);
+ /* Disable interrupts. */
+ outw(SCBMaskAll, ioaddr + SCBCmd);
+ synchronize_irq();
+ speedo_tx_buffer_gc(dev);
+ /* Free as much as possible.
+ It helps to recover from a hang because of out-of-memory.
+ It also simplifies speedo_resume() in case TX ring is full or
+ close-to-be full. */
+ speedo_purge_tx(dev);
+ speedo_refill_rx_buffers(dev, 1);
+ spin_lock_irqsave(&sp->lock, flags);
+ speedo_resume(dev);
+ sp->rx_mode = -1;
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ set_rx_mode(dev); /* it takes the spinlock itself --SAW */
+ /* Reset MII transceiver. Do it before starting the timer to serialize
+ mdio_xxx operations. Yes, it's a paranoya :-) 2000/05/09 SAW */
+ reset_mii(dev);
+ sp->timer.expires = RUN_AT(2*HZ);
+ add_timer(&sp->timer);
+ }
+ return;
+}
+
+static int
+speedo_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int entry;
+
+#if ! defined(HAS_NETIF_QUEUE)
+ if (test_bit(0, (void*)&dev->tbusy) != 0) {
+ int tickssofar = jiffies - dev->trans_start;
+ if (tickssofar < TX_TIMEOUT - 2)
+ return 1;
+ if (tickssofar < TX_TIMEOUT) {
+ /* Reap sent packets from the full Tx queue. */
+ unsigned long flags;
+ /* Take a spinlock to make wait_for_cmd_done and sending the
+ command atomic. --SAW */
+ spin_lock_irqsave(&sp->lock, flags);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outw(SCBTriggerIntr, ioaddr + SCBCmd);
+ spin_unlock_irqrestore(&sp->lock, flags);
+ return 1;
+ }
+ speedo_tx_timeout(dev);
+ return 1;
+ }
+#endif
+
+ { /* Prevent interrupts from changing the Tx ring from underneath us. */
+ unsigned long flags;
+
+ spin_lock_irqsave(&sp->lock, flags);
+
+ /* Check if there are enough space. */
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ printk(KERN_ERR "%s: incorrect tbusy state, fixed.\n", dev->name);
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ return 1;
+ }
+
+ /* Calculate the Tx descriptor entry. */
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+
+ sp->tx_skbuff[entry] = skb;
+ sp->tx_ring[entry].status =
+ cpu_to_le32(CmdSuspend | CmdTx | CmdTxFlex);
+ if (!(entry & ((TX_RING_SIZE>>2)-1)))
+ sp->tx_ring[entry].status |= cpu_to_le32(CmdIntr);
+ sp->tx_ring[entry].link =
+ virt_to_le32desc(&sp->tx_ring[sp->cur_tx % TX_RING_SIZE]);
+ sp->tx_ring[entry].tx_desc_addr =
+ virt_to_le32desc(&sp->tx_ring[entry].tx_buf_addr0);
+ /* The data region is always in one buffer descriptor. */
+ sp->tx_ring[entry].count = cpu_to_le32(sp->tx_threshold);
+ sp->tx_ring[entry].tx_buf_addr0 = virt_to_le32desc(skb->data);
+ sp->tx_ring[entry].tx_buf_size0 = cpu_to_le32(skb->len);
+ /* Trigger the command unit resume. */
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ clear_suspend(sp->last_cmd);
+ /* We want the time window between clearing suspend flag on the previous
+ command and resuming CU to be as small as possible.
+ Interrupts in between are very undesired. --SAW */
+ outb(CUResume, ioaddr + SCBCmd);
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+
+ /* Leave room for set_rx_mode(). If there is no more space than reserved
+ for multicast filter mark the ring as full. */
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+
+ dev->trans_start = jiffies;
+
+ return 0;
+}
+
+static void speedo_tx_buffer_gc(struct net_device *dev)
+{
+ unsigned int dirty_tx;
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+
+ dirty_tx = sp->dirty_tx;
+ while ((int)(sp->cur_tx - dirty_tx) > 0) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ int status = le32_to_cpu(sp->tx_ring[entry].status);
+
+ if (speedo_debug > 5)
+ printk(KERN_DEBUG " scavenge candidate %d status %4.4x.\n",
+ entry, status);
+ if ((status & StatusComplete) == 0)
+ break; /* It still hasn't been processed. */
+ if (status & TxUnderrun)
+ if (sp->tx_threshold < 0x01e08000) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG "%s: TX underrun, threshold adjusted.\n",
+ dev->name);
+ sp->tx_threshold += 0x00040000;
+ }
+ /* Free the original skb. */
+ if (sp->tx_skbuff[entry]) {
+ sp->stats.tx_packets++; /* Count only user packets. */
+ /* sp->stats.tx_bytes += sp->tx_skbuff[entry]->len; */
+ dev_free_skb(sp->tx_skbuff[entry]);
+ sp->tx_skbuff[entry] = 0;
+ }
+ dirty_tx++;
+ }
+
+ if (speedo_debug && (int)(sp->cur_tx - dirty_tx) > TX_RING_SIZE) {
+ printk(KERN_ERR "out-of-sync dirty pointer, %d vs. %d,"
+ " full=%d.\n",
+ dirty_tx, sp->cur_tx, sp->tx_full);
+ dirty_tx += TX_RING_SIZE;
+ }
+
+ while (sp->mc_setup_head != NULL
+ && (int)(dirty_tx - sp->mc_setup_head->tx - 1) > 0) {
+ struct speedo_mc_block *t;
+ if (speedo_debug > 1)
+ printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
+ }
+ if (sp->mc_setup_head == NULL)
+ sp->mc_setup_tail = NULL;
+
+ sp->dirty_tx = dirty_tx;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static void speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_instance;
+ struct speedo_private *sp;
+ long ioaddr, boguscnt = max_interrupt_work;
+ unsigned short status;
+
+#ifndef final_version
+ if (dev == NULL) {
+ printk(KERN_ERR "speedo_interrupt(): irq %d for unknown device.\n", irq);
+ return;
+ }
+#endif
+
+ ioaddr = dev->base_addr;
+ sp = (struct speedo_private *)dev->priv;
+
+#ifndef final_version
+ /* A lock to prevent simultaneous entry on SMP machines. */
+ if (test_and_set_bit(0, (void*)&sp->in_interrupt)) {
+ printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n",
+ dev->name);
+ sp->in_interrupt = 0; /* Avoid halting machine. */
+ return;
+ }
+ dev->interrupt = 1;
+#endif
+
+ do {
+ status = inw(ioaddr + SCBStatus);
+ /* Acknowledge all of the current interrupt sources ASAP. */
+ /* Will change from 0xfc00 to 0xff00 when we start handling
+ FCP and ER interrupts --Dragan */
+ outw(status & 0xfc00, ioaddr + SCBStatus);
+
+ if (speedo_debug > 3)
+ printk(KERN_DEBUG "%s: interrupt status=%#4.4x.\n",
+ dev->name, status);
+
+ if ((status & 0xfc00) == 0)
+ break;
+
+ /* Always check if all rx buffers are allocated. --SAW */
+ speedo_refill_rx_buffers(dev, 0);
+
+ if ((status & 0x5000) || /* Packet received, or Rx error. */
+ (sp->rx_ring_state&(RrNoMem|RrPostponed)) == RrPostponed)
+ /* Need to gather the postponed packet. */
+ speedo_rx(dev);
+
+ if (status & 0x1000) {
+ spin_lock(&sp->lock);
+ if ((status & 0x003c) == 0x0028) { /* No more Rx buffers. */
+ struct RxFD *rxf;
+ printk(KERN_WARNING "%s: card reports no RX buffers.\n",
+ dev->name);
+ rxf = sp->rx_ringp[sp->cur_rx % RX_RING_SIZE];
+ if (rxf == NULL) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG
+ "%s: NULL cur_rx in speedo_interrupt().\n",
+ dev->name);
+ sp->rx_ring_state |= RrNoMem|RrNoResources;
+ } else if (rxf == sp->last_rxf) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG
+ "%s: cur_rx is last in speedo_interrupt().\n",
+ dev->name);
+ sp->rx_ring_state |= RrNoMem|RrNoResources;
+ } else
+ outb(RxResumeNoResources, ioaddr + SCBCmd);
+ } else if ((status & 0x003c) == 0x0008) { /* No resources. */
+ struct RxFD *rxf;
+ printk(KERN_WARNING "%s: card reports no resources.\n",
+ dev->name);
+ rxf = sp->rx_ringp[sp->cur_rx % RX_RING_SIZE];
+ if (rxf == NULL) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG
+ "%s: NULL cur_rx in speedo_interrupt().\n",
+ dev->name);
+ sp->rx_ring_state |= RrNoMem|RrNoResources;
+ } else if (rxf == sp->last_rxf) {
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG
+ "%s: cur_rx is last in speedo_interrupt().\n",
+ dev->name);
+ sp->rx_ring_state |= RrNoMem|RrNoResources;
+ } else {
+ /* Restart the receiver. */
+ outl(virt_to_bus(sp->rx_ringp[sp->cur_rx % RX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ outb(RxStart, ioaddr + SCBCmd);
+ }
+ }
+ sp->stats.rx_errors++;
+ spin_unlock(&sp->lock);
+ }
+
+ if ((sp->rx_ring_state&(RrNoMem|RrNoResources)) == RrNoResources) {
+ printk(KERN_WARNING
+ "%s: restart the receiver after a possible hang.\n",
+ dev->name);
+ spin_lock(&sp->lock);
+ /* Restart the receiver.
+ I'm not sure if it's always right to restart the receiver
+ here but I don't know another way to prevent receiver hangs.
+ 1999/12/25 SAW */
+ outl(virt_to_bus(sp->rx_ringp[sp->cur_rx % RX_RING_SIZE]),
+ ioaddr + SCBPointer);
+ outb(RxStart, ioaddr + SCBCmd);
+ sp->rx_ring_state &= ~RrNoResources;
+ spin_unlock(&sp->lock);
+ }
+
+ /* User interrupt, Command/Tx unit interrupt or CU not active. */
+ if (status & 0xA400) {
+ spin_lock(&sp->lock);
+ speedo_tx_buffer_gc(dev);
+ if (sp->tx_full
+ && (int)(sp->cur_tx - sp->dirty_tx) < TX_QUEUE_UNFULL) {
+ /* The ring is no longer full. */
+ sp->tx_full = 0;
+ netif_wake_queue(dev); /* Attention: under a spinlock. --SAW */
+ }
+ spin_unlock(&sp->lock);
+ }
+
+ if (--boguscnt < 0) {
+ printk(KERN_ERR "%s: Too much work at interrupt, status=0x%4.4x.\n",
+ dev->name, status);
+ /* Clear all interrupt sources. */
+ /* Will change from 0xfc00 to 0xff00 when we start handling
+ FCP and ER interrupts --Dragan */
+ outl(0xfc00, ioaddr + SCBStatus);
+ break;
+ }
+ } while (1);
+
+ if (speedo_debug > 3)
+ printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
+ dev->name, inw(ioaddr + SCBStatus));
+
+ dev->interrupt = 0;
+ clear_bit(0, (void*)&sp->in_interrupt);
+ return;
+}
+
+static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ struct RxFD *rxf;
+ struct sk_buff *skb;
+ /* Get a fresh skbuff to replace the consumed one. */
+ skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
+ sp->rx_skbuff[entry] = skb;
+ if (skb == NULL) {
+ sp->rx_ringp[entry] = NULL;
+ return NULL;
+ }
+ rxf = sp->rx_ringp[entry] = (struct RxFD *)skb->tail;
+ skb->dev = dev;
+ skb_reserve(skb, sizeof(struct RxFD));
+ rxf->rx_buf_addr = virt_to_bus(skb->tail);
+ return rxf;
+}
+
+static inline void speedo_rx_link(struct net_device *dev, int entry,
+ struct RxFD *rxf)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ rxf->status = cpu_to_le32(0xC0000001); /* '1' for driver use only. */
+ rxf->link = 0; /* None yet. */
+ rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
+ sp->last_rxf->link = virt_to_le32desc(rxf);
+ sp->last_rxf->status &= cpu_to_le32(~0xC0000000);
+ sp->last_rxf = rxf;
+}
+
+static int speedo_refill_rx_buf(struct net_device *dev, int force)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ int entry;
+ struct RxFD *rxf;
+
+ entry = sp->dirty_rx % RX_RING_SIZE;
+ if (sp->rx_skbuff[entry] == NULL) {
+ rxf = speedo_rx_alloc(dev, entry);
+ if (rxf == NULL) {
+ unsigned int forw;
+ int forw_entry;
+ if (speedo_debug > 2 || !(sp->rx_ring_state & RrOOMReported)) {
+ printk(KERN_WARNING "%s: can't fill rx buffer (force %d)!\n",
+ dev->name, force);
+ speedo_show_state(dev);
+ sp->rx_ring_state |= RrOOMReported;
+ }
+ if (!force)
+ return -1; /* Better luck next time! */
+ /* Borrow an skb from one of next entries. */
+ for (forw = sp->dirty_rx + 1; forw != sp->cur_rx; forw++)
+ if (sp->rx_skbuff[forw % RX_RING_SIZE] != NULL)
+ break;
+ if (forw == sp->cur_rx)
+ return -1;
+ forw_entry = forw % RX_RING_SIZE;
+ sp->rx_skbuff[entry] = sp->rx_skbuff[forw_entry];
+ sp->rx_skbuff[forw_entry] = NULL;
+ rxf = sp->rx_ringp[forw_entry];
+ sp->rx_ringp[forw_entry] = NULL;
+ sp->rx_ringp[entry] = rxf;
+ }
+ } else {
+ rxf = sp->rx_ringp[entry];
+ }
+ speedo_rx_link(dev, entry, rxf);
+ sp->dirty_rx++;
+ sp->rx_ring_state &= ~(RrNoMem|RrOOMReported); /* Mark the progress. */
+ return 0;
+}
+
+static void speedo_refill_rx_buffers(struct net_device *dev, int force)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+
+ /* Refill the RX ring. */
+ while ((int)(sp->cur_rx - sp->dirty_rx) > 0 &&
+ speedo_refill_rx_buf(dev, force) != -1);
+}
+
+static int
+speedo_rx(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ int entry = sp->cur_rx % RX_RING_SIZE;
+ int status;
+ int rx_work_limit = sp->dirty_rx + RX_RING_SIZE - sp->cur_rx;
+ int alloc_ok = 1;
+
+ if (speedo_debug > 4)
+ printk(KERN_DEBUG " In speedo_rx().\n");
+ /* If we own the next entry, it's a new packet. Send it up. */
+ while (sp->rx_ringp[entry] != NULL &&
+ (status = le32_to_cpu(sp->rx_ringp[entry]->status)) & RxComplete) {
+ int pkt_len = le32_to_cpu(sp->rx_ringp[entry]->count) & 0x3fff;
+
+ if (--rx_work_limit < 0)
+ break;
+
+ /* Check for a rare out-of-memory case: the current buffer is
+ the last buffer allocated in the RX ring. --SAW */
+ if (sp->last_rxf == sp->rx_ringp[entry]) {
+ /* Postpone the packet. It'll be reaped at an interrupt when this
+ packet is no longer the last packet in the ring. */
+ if (speedo_debug > 2)
+ printk(KERN_DEBUG "%s: RX packet postponed!\n",
+ dev->name);
+ sp->rx_ring_state |= RrPostponed;
+ break;
+ }
+
+ if (speedo_debug > 4)
+ printk(KERN_DEBUG " speedo_rx() status %8.8x len %d.\n", status,
+ pkt_len);
+ if ((status & (RxErrTooBig|RxOK|0x0f90)) != RxOK) {
+ if (status & RxErrTooBig)
+ printk(KERN_ERR "%s: Ethernet frame overran the Rx buffer, "
+ "status %8.8x!\n", dev->name, status);
+ else if (! (status & RxOK)) {
+ /* There was a fatal error. This *should* be impossible. */
+ sp->stats.rx_errors++;
+ printk(KERN_ERR "%s: Anomalous event in speedo_rx(), "
+ "status %8.8x.\n",
+ dev->name, status);
+ }
+ } else {
+ struct sk_buff *skb;
+
+ /* Check if the packet is long enough to just accept without
+ copying to a properly sized skbuff. */
+ if (pkt_len < rx_copybreak
+ && (skb = dev_alloc_skb(pkt_len + 2)) != 0) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ /* 'skb_put()' points to the start of sk_buff data area. */
+#if !defined(__alpha__)
+ /* Packet is in one chunk -- we can copy + cksum. */
+ eth_copy_and_sum(skb, sp->rx_skbuff[entry]->tail, pkt_len, 0);
+ skb_put(skb, pkt_len);
+#else
+ memcpy(skb_put(skb, pkt_len), sp->rx_skbuff[entry]->tail,
+ pkt_len);
+#endif
+ } else {
+ /* Pass up the already-filled skbuff. */
+ skb = sp->rx_skbuff[entry];
+ if (skb == NULL) {
+ printk(KERN_ERR "%s: Inconsistent Rx descriptor chain.\n",
+ dev->name);
+ break;
+ }
+ sp->rx_skbuff[entry] = NULL;
+ skb_put(skb, pkt_len);
+ sp->rx_ringp[entry] = NULL;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ sp->stats.rx_packets++;
+ /* sp->stats.rx_bytes += pkt_len; */
+ }
+ entry = (++sp->cur_rx) % RX_RING_SIZE;
+ sp->rx_ring_state &= ~RrPostponed;
+ /* Refill the recently taken buffers.
+ Do it one-by-one to handle traffic bursts better. */
+ if (alloc_ok && speedo_refill_rx_buf(dev, 0) == -1)
+ alloc_ok = 0;
+ }
+
+ /* Try hard to refill the recently taken buffers. */
+ speedo_refill_rx_buffers(dev, 1);
+
+ sp->last_rx_time = jiffies;
+
+ return 0;
+}
+
+static int
+speedo_close(struct net_device *dev)
+{
+ long ioaddr = dev->base_addr;
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ int i;
+
+ dev->start = 0;
+ netif_stop_queue(dev);
+
+ if (speedo_debug > 1)
+ printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
+ dev->name, inw(ioaddr + SCBStatus));
+
+ /* Shut off the media monitoring timer. */
+ start_bh_atomic();
+ del_timer(&sp->timer);
+ end_bh_atomic();
+
+ /* Shutting down the chip nicely fails to disable flow control. So.. */
+ outl(PortPartialReset, ioaddr + SCBPort);
+
+ free_irq(dev->irq, dev);
+
+ /* Print a few items for debugging. */
+ if (speedo_debug > 3)
+ speedo_show_state(dev);
+
+ /* Free all the skbuffs in the Rx and Tx queues. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = sp->rx_skbuff[i];
+ sp->rx_skbuff[i] = 0;
+ /* Clear the Rx descriptors. */
+ if (skb)
+ dev_free_skb(skb);
+ }
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ struct sk_buff *skb = sp->tx_skbuff[i];
+ sp->tx_skbuff[i] = 0;
+ /* Clear the Tx descriptors. */
+ if (skb)
+ dev_free_skb(skb);
+ }
+
+ /* Free multicast setting blocks. */
+ for (i = 0; sp->mc_setup_head != NULL; i++) {
+ struct speedo_mc_block *t;
+ t = sp->mc_setup_head->next;
+ kfree(sp->mc_setup_head);
+ sp->mc_setup_head = t;
+ }
+ sp->mc_setup_tail = NULL;
+ if (speedo_debug > 0)
+ printk(KERN_DEBUG "%s: %d multicast blocks dropped.\n", dev->name, i);
+
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+}
+
+/* The Speedo-3 has an especially awkward and unusable method of getting
+ statistics out of the chip. It takes an unpredictable length of time
+ for the dump-stats command to complete. To avoid a busy-wait loop we
+ update the stats with the previous dump results, and then trigger a
+ new dump.
+
+ These problems are mitigated by the current /proc implementation, which
+ calls this routine first to judge the output length, and then to emit the
+ output.
+
+ Oh, and incoming frames are dropped while executing dump-stats!
+ */
+static struct enet_statistics *
+speedo_get_stats(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+
+ /* Update only if the previous dump finished. */
+ if (sp->lstats.done_marker == le32_to_cpu(0xA007)) {
+ sp->stats.tx_aborted_errors += le32_to_cpu(sp->lstats.tx_coll16_errs);
+ sp->stats.tx_window_errors += le32_to_cpu(sp->lstats.tx_late_colls);
+ sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats.tx_underruns);
+ sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats.tx_lost_carrier);
+ /*sp->stats.tx_deferred += le32_to_cpu(sp->lstats.tx_deferred);*/
+ sp->stats.collisions += le32_to_cpu(sp->lstats.tx_total_colls);
+ sp->stats.rx_crc_errors += le32_to_cpu(sp->lstats.rx_crc_errs);
+ sp->stats.rx_frame_errors += le32_to_cpu(sp->lstats.rx_align_errs);
+ sp->stats.rx_over_errors += le32_to_cpu(sp->lstats.rx_resource_errs);
+ sp->stats.rx_fifo_errors += le32_to_cpu(sp->lstats.rx_overrun_errs);
+ sp->stats.rx_length_errors += le32_to_cpu(sp->lstats.rx_runt_errs);
+ sp->lstats.done_marker = 0x0000;
+ if (dev->start) {
+ unsigned long flags;
+ /* Take a spinlock to make wait_for_cmd_done and sending the
+ command atomic. --SAW */
+ spin_lock_irqsave(&sp->lock, flags);
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ outb(CUDumpStats, ioaddr + SCBCmd);
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+ }
+ return &sp->stats;
+}
+
+static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ u16 *data = (u16 *)&rq->ifr_data;
+ int phy = sp->phy[0] & 0x1f;
+
+ switch(cmd) {
+ case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
+ data[0] = phy;
+ case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
+ /* FIXME: these operations need to be serialized with MDIO
+ access from the timeout handler.
+ They are currently serialized only with MDIO access from the
+ timer routine. 2000/05/09 SAW */
+ start_bh_atomic();
+ data[3] = mdio_read(ioaddr, data[0], data[1]);
+ end_bh_atomic();
+ return 0;
+ case SIOCDEVPRIVATE+2: /* Write the specified MII register */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ start_bh_atomic();
+ mdio_write(ioaddr, data[0], data[1], data[2]);
+ end_bh_atomic();
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This is very ugly with Intel chips -- we usually have to execute an
+ entire configuration command, plus process a multicast command.
+ This is complicated. We must put a large configuration command and
+ an arbitrarily-sized multicast command in the transmit list.
+ To minimize the disruption -- the previous command might have already
+ loaded the link -- we convert the current command block, normally a Tx
+ command, into a no-op and link it to the new command.
+*/
+static void set_rx_mode(struct net_device *dev)
+{
+ struct speedo_private *sp = (struct speedo_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ struct descriptor *last_cmd;
+ char new_rx_mode;
+ unsigned long flags;
+ int entry, i;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ new_rx_mode = 3;
+ } else if ((dev->flags & IFF_ALLMULTI) ||
+ dev->mc_count > multicast_filter_limit) {
+ new_rx_mode = 1;
+ } else
+ new_rx_mode = 0;
+
+ if (speedo_debug > 3)
+ printk(KERN_DEBUG "%s: set_rx_mode %d -> %d\n", dev->name,
+ sp->rx_mode, new_rx_mode);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) > TX_RING_SIZE - TX_MULTICAST_SIZE) {
+ /* The Tx ring is full -- don't add anything! Hope the mode will be
+ * set again later. */
+ sp->rx_mode = -1;
+ return;
+ }
+
+ if (new_rx_mode != sp->rx_mode) {
+ u8 *config_cmd_data;
+
+ spin_lock_irqsave(&sp->lock, flags);
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+
+ sp->tx_skbuff[entry] = 0; /* Redundant. */
+ sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdConfigure);
+ sp->tx_ring[entry].link =
+ virt_to_le32desc(&sp->tx_ring[(entry + 1) % TX_RING_SIZE]);
+ config_cmd_data = (void *)&sp->tx_ring[entry].tx_desc_addr;
+ /* Construct a full CmdConfig frame. */
+ memcpy(config_cmd_data, i82558_config_cmd, sizeof(i82558_config_cmd));
+ config_cmd_data[1] = (txfifo << 4) | rxfifo;
+ config_cmd_data[4] = rxdmacount;
+ config_cmd_data[5] = txdmacount + 0x80;
+ config_cmd_data[15] |= (new_rx_mode & 2) ? 1 : 0;
+ /* 0x80 doesn't disable FC 0x84 does.
+ Disable Flow control since we are not ACK-ing any FC interrupts
+ for now. --Dragan */
+ config_cmd_data[19] = 0x84;
+ config_cmd_data[19] |= sp->full_duplex ? 0x40 : 0;
+ config_cmd_data[21] = (new_rx_mode & 1) ? 0x0D : 0x05;
+ if (sp->phy[0] & 0x8000) { /* Use the AUI port instead. */
+ config_cmd_data[15] |= 0x80;
+ config_cmd_data[8] = 0;
+ }
+ /* Trigger the command unit resume. */
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ clear_suspend(last_cmd);
+ outb(CUResume, ioaddr + SCBCmd);
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+
+ if (new_rx_mode == 0 && dev->mc_count < 4) {
+ /* The simple case of 0-3 multicast list entries occurs often, and
+ fits within one tx_ring[] entry. */
+ struct dev_mc_list *mclist;
+ u16 *setup_params, *eaddrs;
+
+ spin_lock_irqsave(&sp->lock, flags);
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
+
+ sp->tx_skbuff[entry] = 0;
+ sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdMulticastList);
+ sp->tx_ring[entry].link =
+ virt_to_le32desc(&sp->tx_ring[(entry + 1) % TX_RING_SIZE]);
+ sp->tx_ring[entry].tx_desc_addr = 0; /* Really MC list count. */
+ setup_params = (u16 *)&sp->tx_ring[entry].tx_desc_addr;
+ *setup_params++ = cpu_to_le16(dev->mc_count*6);
+ /* Fill in the multicast addresses. */
+ for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ eaddrs = (u16 *)mclist->dmi_addr;
+ *setup_params++ = *eaddrs++;
+ *setup_params++ = *eaddrs++;
+ *setup_params++ = *eaddrs++;
+ }
+
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ clear_suspend(last_cmd);
+ /* Immediately trigger the command unit resume. */
+ outb(CUResume, ioaddr + SCBCmd);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+ spin_unlock_irqrestore(&sp->lock, flags);
+ } else if (new_rx_mode == 0) {
+ struct dev_mc_list *mclist;
+ u16 *setup_params, *eaddrs;
+ struct speedo_mc_block *mc_blk;
+ struct descriptor *mc_setup_frm;
+ int i;
+
+ mc_blk = kmalloc(sizeof(*mc_blk) + 2 + multicast_filter_limit*6,
+ GFP_ATOMIC);
+ if (mc_blk == NULL) {
+ printk(KERN_ERR "%s: Failed to allocate a setup frame.\n",
+ dev->name);
+ sp->rx_mode = -1; /* We failed, try again. */
+ return;
+ }
+ mc_blk->next = NULL;
+ mc_setup_frm = &mc_blk->frame;
+
+ /* Fill the setup frame. */
+ if (speedo_debug > 1)
+ printk(KERN_DEBUG "%s: Constructing a setup frame at %p.\n",
+ dev->name, mc_setup_frm);
+ mc_setup_frm->cmd_status =
+ cpu_to_le32(CmdSuspend | CmdIntr | CmdMulticastList);
+ /* Link set below. */
+ setup_params = (u16 *)&mc_setup_frm->params;
+ *setup_params++ = cpu_to_le16(dev->mc_count*6);
+ /* Fill in the multicast addresses. */
+ for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ eaddrs = (u16 *)mclist->dmi_addr;
+ *setup_params++ = *eaddrs++;
+ *setup_params++ = *eaddrs++;
+ *setup_params++ = *eaddrs++;
+ }
+
+ /* Disable interrupts while playing with the Tx Cmd list. */
+ spin_lock_irqsave(&sp->lock, flags);
+
+ if (sp->mc_setup_tail)
+ sp->mc_setup_tail->next = mc_blk;
+ else
+ sp->mc_setup_head = mc_blk;
+ sp->mc_setup_tail = mc_blk;
+ mc_blk->tx = sp->cur_tx;
+
+ entry = sp->cur_tx++ % TX_RING_SIZE;
+ last_cmd = sp->last_cmd;
+ sp->last_cmd = mc_setup_frm;
+
+ /* Change the command to a NoOp, pointing to the CmdMulti command. */
+ sp->tx_skbuff[entry] = 0;
+ sp->tx_ring[entry].status = cpu_to_le32(CmdNOp);
+ sp->tx_ring[entry].link = virt_to_le32desc(mc_setup_frm);
+
+ /* Set the link in the setup frame. */
+ mc_setup_frm->link =
+ virt_to_le32desc(&(sp->tx_ring[(entry+1) % TX_RING_SIZE]));
+
+ wait_for_cmd_done(ioaddr + SCBCmd);
+ clear_suspend(last_cmd);
+ /* Immediately trigger the command unit resume. */
+ outb(CUResume, ioaddr + SCBCmd);
+
+ if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
+ netif_stop_queue(dev);
+ sp->tx_full = 1;
+ }
+ spin_unlock_irqrestore(&sp->lock, flags);
+
+ if (speedo_debug > 5)
+ printk(" CmdMCSetup frame length %d in entry %d.\n",
+ dev->mc_count, entry);
+ }
+
+ sp->rx_mode = new_rx_mode;
+}
+
+#ifdef MODULE
+
+int init_module(void)
+{
+ int cards_found;
+
+ if (debug >= 0 && speedo_debug != debug)
+ printk(KERN_INFO "eepro100.c: Debug level is %d.\n", debug);
+ if (debug >= 0)
+ speedo_debug = debug;
+ /* Always emit the version message. */
+ if (speedo_debug)
+ printk(KERN_INFO "%s", version);
+
+ cards_found = eepro100_init();
+ if (cards_found <= 0) {
+ printk(KERN_INFO "eepro100: No cards found, driver not installed.\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+void
+cleanup_module(void)
+{
+ struct net_device *next_dev;
+
+ /* No need to check MOD_IN_USE, as sys_delete_module() checks. */
+ while (root_speedo_dev) {
+ struct speedo_private *sp = (void *)root_speedo_dev->priv;
+ unregister_netdev(root_speedo_dev);
+ release_region(root_speedo_dev->base_addr, SPEEDO3_TOTAL_SIZE);
+#ifndef USE_IO
+ iounmap((char *)root_speedo_dev->base_addr);
+#endif
+ next_dev = sp->next_module;
+ if (sp->priv_addr)
+ kfree(sp->priv_addr);
+ kfree(root_speedo_dev);
+ root_speedo_dev = next_dev;
+ }
+}
+
+#else /* not MODULE */
+
+int eepro100_probe(void)
+{
+ int cards_found = 0;
+
+ cards_found = eepro100_init();
+
+ if (speedo_debug > 0 && cards_found)
+ printk(version);
+
+ return cards_found ? 0 : -ENODEV;
+}
+#endif /* MODULE */
+
+/*
+ * Local variables:
+ * compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c eepro100.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ * SMP-compile-command: "gcc -D__SMP__ -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c eepro100.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */
diff --git a/linux/src/include/asm-i386/hardirq.h b/linux/src/include/asm-i386/hardirq.h
new file mode 100644
index 0000000..5339613
--- /dev/null
+++ b/linux/src/include/asm-i386/hardirq.h
@@ -0,0 +1,65 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/tasks.h>
+
+extern unsigned int local_irq_count[NR_CPUS];
+
+/*
+ * Are we in an interrupt context? Either doing bottom half
+ * or hardware interrupt processing?
+ */
+#define in_interrupt() ({ int __cpu = smp_processor_id(); \
+ (local_irq_count[__cpu] + local_bh_count[__cpu] != 0); })
+
+#ifndef __SMP__
+
+#define hardirq_trylock(cpu) (local_irq_count[cpu] == 0)
+#define hardirq_endlock(cpu) do { } while (0)
+
+#define hardirq_enter(cpu) (local_irq_count[cpu]++)
+#define hardirq_exit(cpu) (local_irq_count[cpu]--)
+
+#define synchronize_irq() barrier()
+
+#else
+
+#include <asm/atomic.h>
+
+extern unsigned char global_irq_holder;
+extern unsigned volatile int global_irq_lock;
+extern atomic_t global_irq_count;
+
+static inline void release_irqlock(int cpu)
+{
+ /* if we didn't own the irq lock, just ignore.. */
+ if (global_irq_holder == (unsigned char) cpu) {
+ global_irq_holder = NO_PROC_ID;
+ clear_bit(0,&global_irq_lock);
+ }
+}
+
+static inline void hardirq_enter(int cpu)
+{
+ ++local_irq_count[cpu];
+ atomic_inc(&global_irq_count);
+}
+
+static inline void hardirq_exit(int cpu)
+{
+ atomic_dec(&global_irq_count);
+ --local_irq_count[cpu];
+}
+
+static inline int hardirq_trylock(int cpu)
+{
+ return !atomic_read(&global_irq_count) && !test_bit(0,&global_irq_lock);
+}
+
+#define hardirq_endlock(cpu) do { } while (0)
+
+extern void synchronize_irq(void);
+
+#endif /* __SMP__ */
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/linux/src/include/asm-i386/spinlock.h b/linux/src/include/asm-i386/spinlock.h
new file mode 100644
index 0000000..18119d4
--- /dev/null
+++ b/linux/src/include/asm-i386/spinlock.h
@@ -0,0 +1,262 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#ifndef __SMP__
+
+#define DEBUG_SPINLOCKS 0 /* 0 == no debugging, 1 == maintain lock state, 2 == full debug */
+
+#if (DEBUG_SPINLOCKS < 1)
+
+/*
+ * Your basic spinlocks, allowing only a single CPU anywhere
+ *
+ * Gcc-2.7.x has a nasty bug with empty initializers.
+ */
+#if (__GNUC__ > 2) || (__GNUC__ == 2 && __GNUC_MINOR__ >= 8)
+ typedef struct { } spinlock_t;
+ #define SPIN_LOCK_UNLOCKED (spinlock_t) { }
+#else
+ typedef struct { int gcc_is_buggy; } spinlock_t;
+ #define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 }
+#endif
+
+#define spin_lock_init(lock) do { } while(0)
+#define spin_lock(lock) (void)(lock) /* Not "unused variable". */
+#define spin_trylock(lock) (1)
+#define spin_unlock_wait(lock) do { } while(0)
+#define spin_unlock(lock) do { } while(0)
+#define spin_lock_irq(lock) cli()
+#define spin_unlock_irq(lock) sti()
+
+#define spin_lock_irqsave(lock, flags) \
+ do { save_flags(flags); cli(); } while (0)
+#define spin_unlock_irqrestore(lock, flags) \
+ restore_flags(flags)
+
+#elif (DEBUG_SPINLOCKS < 2)
+
+typedef struct {
+ volatile unsigned int lock;
+} spinlock_t;
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 }
+
+#define spin_lock_init(x) do { (x)->lock = 0; } while (0)
+#define spin_trylock(lock) (!test_and_set_bit(0,(lock)))
+
+#define spin_lock(x) do { (x)->lock = 1; } while (0)
+#define spin_unlock_wait(x) do { } while (0)
+#define spin_unlock(x) do { (x)->lock = 0; } while (0)
+#define spin_lock_irq(x) do { cli(); spin_lock(x); } while (0)
+#define spin_unlock_irq(x) do { spin_unlock(x); sti(); } while (0)
+
+#define spin_lock_irqsave(x, flags) \
+ do { save_flags(flags); spin_lock_irq(x); } while (0)
+#define spin_unlock_irqrestore(x, flags) \
+ do { spin_unlock(x); restore_flags(flags); } while (0)
+
+#else /* (DEBUG_SPINLOCKS >= 2) */
+
+typedef struct {
+ volatile unsigned int lock;
+ volatile unsigned int babble;
+ const char *module;
+} spinlock_t;
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0, 25, __BASE_FILE__ }
+
+#include <linux/kernel.h>
+
+#define spin_lock_init(x) do { (x)->lock = 0; } while (0)
+#define spin_trylock(lock) (!test_and_set_bit(0,(lock)))
+
+#define spin_lock(x) do {unsigned long __spinflags; save_flags(__spinflags); cli(); if ((x)->lock&&(x)->babble) {printk("%s:%d: spin_lock(%s:%p) already locked\n", __BASE_FILE__,__LINE__, (x)->module, (x));(x)->babble--;} (x)->lock = 1; restore_flags(__spinflags);} while (0)
+#define spin_unlock_wait(x) do {unsigned long __spinflags; save_flags(__spinflags); cli(); if ((x)->lock&&(x)->babble) {printk("%s:%d: spin_unlock_wait(%s:%p) deadlock\n", __BASE_FILE__,__LINE__, (x)->module, (x));(x)->babble--;} restore_flags(__spinflags);} while (0)
+#define spin_unlock(x) do {unsigned long __spinflags; save_flags(__spinflags); cli(); if (!(x)->lock&&(x)->babble) {printk("%s:%d: spin_unlock(%s:%p) not locked\n", __BASE_FILE__,__LINE__, (x)->module, (x));(x)->babble--;} (x)->lock = 0; restore_flags(__spinflags);} while (0)
+#define spin_lock_irq(x) do {cli(); if ((x)->lock&&(x)->babble) {printk("%s:%d: spin_lock_irq(%s:%p) already locked\n", __BASE_FILE__,__LINE__, (x)->module, (x));(x)->babble--;} (x)->lock = 1;} while (0)
+#define spin_unlock_irq(x) do {cli(); if (!(x)->lock&&(x)->babble) {printk("%s:%d: spin_unlock_irq(%s:%p) not locked\n", __BASE_FILE__,__LINE__, (x)->module, (x));(x)->babble--;} (x)->lock = 0; sti();} while (0)
+
+#define spin_lock_irqsave(x,flags) do {save_flags(flags); cli(); if ((x)->lock&&(x)->babble) {printk("%s:%d: spin_lock_irqsave(%s:%p) already locked\n", __BASE_FILE__,__LINE__, (x)->module, (x));(x)->babble--;} (x)->lock = 1;} while (0)
+#define spin_unlock_irqrestore(x,flags) do {cli(); if (!(x)->lock&&(x)->babble) {printk("%s:%d: spin_unlock_irqrestore(%s:%p) not locked\n", __BASE_FILE__,__LINE__, (x)->module, (x));(x)->babble--;} (x)->lock = 0; restore_flags(flags);} while (0)
+
+#endif /* DEBUG_SPINLOCKS */
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * Gcc-2.7.x has a nasty bug with empty initializers.
+ */
+#if (__GNUC__ > 2) || (__GNUC__ == 2 && __GNUC_MINOR__ >= 8)
+ typedef struct { } rwlock_t;
+ #define RW_LOCK_UNLOCKED (rwlock_t) { }
+#else
+ typedef struct { int gcc_is_buggy; } rwlock_t;
+ #define RW_LOCK_UNLOCKED (rwlock_t) { 0 }
+#endif
+
+#define read_lock(lock) (void)(lock) /* Not "unused variable." */
+#define read_unlock(lock) do { } while(0)
+#define write_lock(lock) (void)(lock) /* Not "unused variable." */
+#define write_unlock(lock) do { } while(0)
+#define read_lock_irq(lock) cli()
+#define read_unlock_irq(lock) sti()
+#define write_lock_irq(lock) cli()
+#define write_unlock_irq(lock) sti()
+
+#define read_lock_irqsave(lock, flags) \
+ do { save_flags(flags); cli(); } while (0)
+#define read_unlock_irqrestore(lock, flags) \
+ restore_flags(flags)
+#define write_lock_irqsave(lock, flags) \
+ do { save_flags(flags); cli(); } while (0)
+#define write_unlock_irqrestore(lock, flags) \
+ restore_flags(flags)
+
+#else /* __SMP__ */
+
+/*
+ * Your basic spinlocks, allowing only a single CPU anywhere
+ */
+
+typedef struct {
+ volatile unsigned int lock;
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED (spinlock_t) { 0 }
+
+#define spin_lock_init(x) do { (x)->lock = 0; } while(0)
+/*
+ * Simple spin lock operations. There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+#define spin_unlock_wait(x) do { barrier(); } while(((volatile spinlock_t *)(x))->lock)
+
+typedef struct { unsigned long a[100]; } __dummy_lock_t;
+#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock))
+
+/*
+ * Intel PIV would benefit from using 'rep nop' here but on older
+ * processors and non intel it is listed as 'undefined' so cannot be
+ * blindly used. On 2.4 we should add a PIV CPU type for this one.
+ */
+#define spin_lock_string \
+ "\n1:\t" \
+ "lock ; btsl $0,%0\n\t" \
+ "jc 2f\n" \
+ ".section .text.lock,\"ax\"\n" \
+ "2:\t" \
+ "rep; nop\n\t" \
+ "testb $1,%0\n\t" \
+ "jne 2b\n\t" \
+ "jmp 1b\n" \
+ ".previous"
+
+#define spin_unlock_string \
+ "lock ; btrl $0,%0"
+
+#define spin_lock(lock) \
+__asm__ __volatile__( \
+ spin_lock_string \
+ :"=m" (__dummy_lock(lock)))
+
+#define spin_unlock(lock) \
+__asm__ __volatile__( \
+ spin_unlock_string \
+ :"=m" (__dummy_lock(lock)))
+
+#define spin_trylock(lock) (!test_and_set_bit(0,(lock)))
+
+#define spin_lock_irq(lock) \
+ do { __cli(); spin_lock(lock); } while (0)
+
+#define spin_unlock_irq(lock) \
+ do { spin_unlock(lock); __sti(); } while (0)
+
+#define spin_lock_irqsave(lock, flags) \
+ do { __save_flags(flags); __cli(); spin_lock(lock); } while (0)
+
+#define spin_unlock_irqrestore(lock, flags) \
+ do { spin_unlock(lock); __restore_flags(flags); } while (0)
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+typedef struct {
+ volatile unsigned int lock;
+ unsigned long previous;
+} rwlock_t;
+
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0 }
+
+/*
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "write" bit.
+ *
+ * The inline assembly is non-obvious. Think about it.
+ */
+#define read_lock(rw) \
+ asm volatile("\n1:\t" \
+ "lock ; incl %0\n\t" \
+ "js 2f\n" \
+ ".section .text.lock,\"ax\"\n" \
+ "2:\tlock ; decl %0\n" \
+ "3:\trep; nop\n\t" \
+ "cmpl $0,%0\n\t" \
+ "js 3b\n\t" \
+ "jmp 1b\n" \
+ ".previous" \
+ :"=m" (__dummy_lock(&(rw)->lock)))
+
+#define read_unlock(rw) \
+ asm volatile("lock ; decl %0" \
+ :"=m" (__dummy_lock(&(rw)->lock)))
+
+#define write_lock(rw) \
+ asm volatile("\n1:\t" \
+ "lock ; btsl $31,%0\n\t" \
+ "jc 4f\n" \
+ "2:\ttestl $0x7fffffff,%0\n\t" \
+ "jne 3f\n" \
+ ".section .text.lock,\"ax\"\n" \
+ "3:\tlock ; btrl $31,%0\n" \
+ "4:\trep; nop\n\t" \
+ "cmp $0,%0\n\t" \
+ "jne 4b\n\t" \
+ "jmp 1b\n" \
+ ".previous" \
+ :"=m" (__dummy_lock(&(rw)->lock)))
+
+#define write_unlock(rw) \
+ asm volatile("lock ; btrl $31,%0":"=m" (__dummy_lock(&(rw)->lock)))
+
+#define read_lock_irq(lock) do { __cli(); read_lock(lock); } while (0)
+#define read_unlock_irq(lock) do { read_unlock(lock); __sti(); } while (0)
+#define write_lock_irq(lock) do { __cli(); write_lock(lock); } while (0)
+#define write_unlock_irq(lock) do { write_unlock(lock); __sti(); } while (0)
+
+#define read_lock_irqsave(lock, flags) \
+ do { __save_flags(flags); __cli(); read_lock(lock); } while (0)
+#define read_unlock_irqrestore(lock, flags) \
+ do { read_unlock(lock); __restore_flags(flags); } while (0)
+#define write_lock_irqsave(lock, flags) \
+ do { __save_flags(flags); __cli(); write_lock(lock); } while (0)
+#define write_unlock_irqrestore(lock, flags) \
+ do { write_unlock(lock); __restore_flags(flags); } while (0)
+
+#endif /* __SMP__ */
+#endif /* __ASM_SPINLOCK_H */
diff --git a/linux/src/include/linux/compatmac.h b/linux/src/include/linux/compatmac.h
new file mode 100644
index 0000000..5f9175d
--- /dev/null
+++ b/linux/src/include/linux/compatmac.h
@@ -0,0 +1,152 @@
+ /*
+ * This header tries to allow you to write 2.3-compatible drivers,
+ * but (using this header) still allows you to run them on 2.2 and
+ * 2.0 kernels.
+ *
+ * Sometimes, a #define replaces a "construct" that older kernels
+ * had. For example,
+ *
+ * DECLARE_MUTEX(name);
+ *
+ * replaces the older
+ *
+ * struct semaphore name = MUTEX;
+ *
+ * This file then declares the DECLARE_MUTEX macro to compile into the
+ * older version.
+ *
+ * In some cases, a macro or function changes the number of arguments.
+ * In that case, there is nothing we can do except define an access
+ * macro that provides the same functionality on both versions of Linux.
+ *
+ * This is the case for example with the "get_user" macro 2.0 kernels use:
+ *
+ * a = get_user (b);
+ *
+ * while newer kernels use
+ *
+ * get_user (a,b);
+ *
+ * This is unfortunate. We therefore define "Get_user (a,b)" which looks
+ * almost the same as the 2.2+ construct, and translates into the
+ * appropriate sequence for earlier constructs.
+ *
+ * Supported by this file are the 2.0 kernels, 2.2 kernels, and the
+ * most recent 2.3 kernel. 2.3 support will be dropped as soon when 2.4
+ * comes out. 2.0 support may someday be dropped. But then again, maybe
+ * not.
+ *
+ * I'll try to maintain this, provided that Linus agrees with the setup.
+ * Feel free to mail updates or suggestions.
+ *
+ * -- R.E.Wolff@BitWizard.nl
+ *
+ */
+
+#ifndef COMPATMAC_H
+#define COMPATMAC_H
+
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < 0x020100 /* Less than 2.1.0 */
+#define TWO_ZERO
+#else
+#if LINUX_VERSION_CODE < 0x020200 /* less than 2.2.x */
+#warning "Please use a 2.2.x kernel. "
+#else
+#if LINUX_VERSION_CODE < 0x020300 /* less than 2.3.x */
+#define TWO_TWO
+#else
+#define TWO_THREE
+#endif
+#endif
+#endif
+
+#ifdef TWO_ZERO
+
+/* Here is the section that makes the 2.2 compatible driver source
+ work for 2.0 too! We mostly try to adopt the "new thingies" from 2.2,
+ and provide for compatibility stuff here if possible. */
+
+/* Some 200 days (on intel) */
+#define MAX_SCHEDULE_TIMEOUT ((long)(~0UL>>1))
+
+#include <linux/bios32.h>
+
+#define Get_user(a,b) a = get_user(b)
+#define Put_user(a,b) 0,put_user(a,b)
+#define copy_to_user(a,b,c) memcpy_tofs(a,b,c)
+
+static inline int copy_from_user(void *to,const void *from, int c)
+{
+ memcpy_fromfs(to, from, c);
+ return 0;
+}
+
+#define pci_present pcibios_present
+#define pci_read_config_word pcibios_read_config_word
+#define pci_read_config_dword pcibios_read_config_dword
+
+static inline unsigned char get_irq (unsigned char bus, unsigned char fn)
+{
+ unsigned char t;
+ pcibios_read_config_byte (bus, fn, PCI_INTERRUPT_LINE, &t);
+ return t;
+}
+
+static inline void *ioremap(unsigned long base, long length)
+{
+ if (base < 0x100000) return (void *)base;
+ return vremap (base, length);
+}
+
+#define my_iounmap(x, b) (((long)x<0x100000)?0:vfree ((void*)x))
+
+#define capable(x) suser()
+
+#define queue_task queue_task_irq_off
+#define tty_flip_buffer_push(tty) queue_task(&tty->flip.tqueue, &tq_timer)
+#define signal_pending(current) (current->signal & ~current->blocked)
+#define schedule_timeout(to) do {current->timeout = jiffies + (to);schedule ();} while (0)
+#define time_after(t1,t2) (((long)t1-t2) > 0)
+
+
+#define test_and_set_bit(nr, addr) set_bit(nr, addr)
+#define test_and_clear_bit(nr, addr) clear_bit(nr, addr)
+
+/* Not yet implemented on 2.0 */
+#define ASYNC_SPD_SHI -1
+#define ASYNC_SPD_WARP -1
+
+
+/* Ugly hack: the driver_name doesn't exist in 2.0.x . So we define it
+ to the "name" field that does exist. As long as the assignments are
+ done in the right order, there is nothing to worry about. */
+#define driver_name name
+
+/* Should be in a header somewhere. They are in tty.h on 2.2 */
+#define TTY_HW_COOK_OUT 14 /* Flag to tell ntty what we can handle */
+#define TTY_HW_COOK_IN 15 /* in hardware - output and input */
+
+/* The return type of a "close" routine. */
+#define INT void
+#define NO_ERROR /* Nothing */
+
+#else
+
+/* The 2.2.x compatibility section. */
+#include <asm/uaccess.h>
+
+
+#define Get_user(a,b) get_user(a,b)
+#define Put_user(a,b) put_user(a,b)
+#define get_irq(pdev) pdev->irq
+
+#define INT int
+#define NO_ERROR 0
+
+#define my_iounmap(x,b) (iounmap((char *)(b)))
+
+#endif
+
+#endif
diff --git a/linux/src/include/linux/spinlock.h b/linux/src/include/linux/spinlock.h
new file mode 100644
index 0000000..790ac18
--- /dev/null
+++ b/linux/src/include/linux/spinlock.h
@@ -0,0 +1,4 @@
+#ifndef __LINUX_SPINLOCK_H
+#define __LINUX_SPINLOCK_H
+#include <asm/spinlock.h>
+#endif