summaryrefslogtreecommitdiff
path: root/linux/src/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'linux/src/drivers')
-rw-r--r--linux/src/drivers/block/ide.c75
1 files changed, 51 insertions, 24 deletions
diff --git a/linux/src/drivers/block/ide.c b/linux/src/drivers/block/ide.c
index 90f21b4..5dcd0aa 100644
--- a/linux/src/drivers/block/ide.c
+++ b/linux/src/drivers/block/ide.c
@@ -409,7 +409,11 @@ static void init_hwif_data (unsigned int index)
drive->special.b.set_geometry = 1;
drive->name[0] = 'h';
drive->name[1] = 'd';
+#ifdef MACH
+ drive->name[2] = '0' + (index * MAX_DRIVES) + unit;
+#else
drive->name[2] = 'a' + (index * MAX_DRIVES) + unit;
+#endif
}
}
@@ -609,7 +613,6 @@ static int lba_capacity_is_ok (struct hd_driveid *id)
/* very large drives (8GB+) may lie about the number of cylinders */
if (id->cyls == 16383 && id->heads == 16 && id->sectors == 63 && lba_sects > chs_sects) {
- id->cyls = lba_sects / (16 * 63); /* correct cyls */
return 1; /* lba_capacity is our only option */
}
/* perform a rough sanity check on lba_sects: within 10% is "okay" */
@@ -646,7 +649,6 @@ static unsigned long current_capacity (ide_drive_t *drive)
/* Determine capacity, and use LBA if the drive properly supports it */
if (id != NULL && (id->capability & 2) && lba_capacity_is_ok(id)) {
if (id->lba_capacity >= capacity) {
- drive->cyl = id->lba_capacity / (drive->head * drive->sect);
capacity = id->lba_capacity;
drive->select.b.lba = 1;
}
@@ -1127,6 +1129,9 @@ read_next:
msect -= nsect;
} else
nsect = 1;
+ i = rq->nr_sectors - nsect;
+ if (i > 0 && !msect)
+ ide_set_handler (drive, &read_intr, WAIT_CMD);
ide_input_data(drive, rq->buffer, nsect * SECTOR_WORDS);
#ifdef DEBUG
printk("%s: read: sectors(%ld-%ld), buffer=0x%08lx, remaining=%ld\n",
@@ -1136,14 +1141,11 @@ read_next:
rq->sector += nsect;
rq->buffer += nsect<<9;
rq->errors = 0;
- i = (rq->nr_sectors -= nsect);
+ rq->nr_sectors = i;
if ((rq->current_nr_sectors -= nsect) <= 0)
ide_end_request(1, HWGROUP(drive));
- if (i > 0) {
- if (msect)
- goto read_next;
- ide_set_handler (drive, &read_intr, WAIT_CMD);
- }
+ if (i > 0 && msect)
+ goto read_next;
}
/*
@@ -1171,8 +1173,8 @@ static void write_intr (ide_drive_t *drive)
if (rq->current_nr_sectors <= 0)
ide_end_request(1, hwgroup);
if (i > 0) {
- ide_output_data (drive, rq->buffer, SECTOR_WORDS);
ide_set_handler (drive, &write_intr, WAIT_CMD);
+ ide_output_data (drive, rq->buffer, SECTOR_WORDS);
}
return;
}
@@ -1229,8 +1231,8 @@ static void multwrite_intr (ide_drive_t *drive)
if (OK_STAT(stat=GET_STAT(),DRIVE_READY,drive->bad_wstat)) {
if (stat & DRQ_STAT) {
if (rq->nr_sectors) {
- ide_multwrite(drive, drive->mult_count);
ide_set_handler (drive, &multwrite_intr, WAIT_CMD);
+ ide_multwrite(drive, drive->mult_count);
return;
}
} else {
@@ -1573,8 +1575,14 @@ static inline void do_request (ide_hwif_t *hwif, struct request *rq)
block = rq->sector;
blockend = block + rq->nr_sectors;
if ((blockend < block) || (blockend > drive->part[minor&PARTN_MASK].nr_sects)) {
+#ifdef MACH
+ printk ("%s%c: bad access: block=%ld, count=%ld, blockend=%ld, nr_sects%ld\n",
+ drive->name, (minor&PARTN_MASK)?'0'+(minor&PARTN_MASK):' ',
+ block, rq->nr_sectors, blockend, drive->part[minor&PARTN_MASK].nr_sects);
+#else
printk("%s%c: bad access: block=%ld, count=%ld\n", drive->name,
(minor&PARTN_MASK)?'0'+(minor&PARTN_MASK):' ', block, rq->nr_sectors);
+#endif
goto kill_rq;
}
block += drive->part[minor&PARTN_MASK].start_sect + drive->sect0;
@@ -1596,7 +1604,7 @@ static inline void do_request (ide_hwif_t *hwif, struct request *rq)
printk("%s: drive not ready for command\n", drive->name);
return;
}
-
+
if (!drive->special.all) {
if (rq->cmd == IDE_DRIVE_CMD) {
execute_drive_cmd(drive, rq);
@@ -1636,7 +1644,7 @@ static inline void do_request (ide_hwif_t *hwif, struct request *rq)
#else
do_rw_disk (drive, rq, block); /* simpler and faster */
return;
-#endif /* CONFIG_BLK_DEV_IDEATAPI */;
+#endif /* CONFIG_BLK_DEV_IDEATAPI */
}
do_special(drive);
return;
@@ -1686,7 +1694,7 @@ void ide_do_request (ide_hwgroup_t *hwgroup)
hwgroup->active = 0;
return; /* no work left for this hwgroup */
}
- got_rq:
+ got_rq:
do_request(hwgroup->hwif = hwgroup->next_hwif = hwif, hwgroup->rq = rq);
cli();
} while (hwgroup->handler == NULL);
@@ -2147,6 +2155,14 @@ static int ide_ioctl (struct inode *inode, struct file *file,
{
struct hd_geometry *loc = (struct hd_geometry *) arg;
if (!loc || (drive->media != ide_disk && drive->media != ide_floppy)) return -EINVAL;
+#ifdef MACH
+ loc->heads = drive->bios_head;
+ loc->sectors = drive->bios_sect;
+ loc->cylinders = drive->bios_cyl;
+ loc->start
+ = (drive->part[MINOR(inode->i_rdev)&PARTN_MASK]
+ .start_sect);
+#else
err = verify_area(VERIFY_WRITE, loc, sizeof(*loc));
if (err) return err;
put_user(drive->bios_head, (byte *) &loc->heads);
@@ -2154,6 +2170,7 @@ static int ide_ioctl (struct inode *inode, struct file *file,
put_user(drive->bios_cyl, (unsigned short *) &loc->cylinders);
put_user((unsigned)drive->part[MINOR(inode->i_rdev)&PARTN_MASK].start_sect,
(unsigned long *) &loc->start);
+#endif
return 0;
}
case BLKFLSBUF:
@@ -2410,7 +2427,7 @@ static inline void do_identify (ide_drive_t *drive, byte cmd)
#if defined (CONFIG_SCSI_EATA_DMA) || defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
/*
- * EATA SCSI controllers do a hardware ATA emulation:
+ * EATA SCSI controllers do a hardware ATA emulation:
* Ignore them if there is a driver for them available.
*/
if ((id->model[0] == 'P' && id->model[1] == 'M')
@@ -2579,13 +2596,23 @@ static inline void do_identify (ide_drive_t *drive, byte cmd)
}
/* calculate drive capacity, and select LBA if possible */
- (void) current_capacity (drive);
+ capacity = current_capacity (drive);
/* Correct the number of cyls if the bios value is too small */
- if (drive->sect == drive->bios_sect && drive->head == drive->bios_head) {
- if (drive->cyl > drive->bios_cyl)
- drive->bios_cyl = drive->cyl;
- }
+ if (!drive->forced_geom &&
+ capacity > drive->bios_cyl * drive->bios_sect * drive->bios_head) {
+ unsigned long cylsize;
+ cylsize = drive->bios_sect * drive->bios_head;
+ if (cylsize == 0 || capacity/cylsize > 65535) {
+ drive->bios_sect = 63;
+ drive->bios_head = 255;
+ cylsize = 63*255;
+ }
+ if (capacity/cylsize > 65535)
+ drive->bios_cyl = 65535;
+ else
+ drive->bios_cyl = capacity/cylsize;
+ }
if (!strncmp(id->model, "BMI ", 4) &&
strstr(id->model, " ENHANCED IDE ") &&
@@ -3302,7 +3329,7 @@ done:
* This routine is called from the partition-table code in genhd.c
* to "convert" a drive to a logical geometry with fewer than 1024 cyls.
*
- * The second parameter, "xparm", determines exactly how the translation
+ * The second parameter, "xparm", determines exactly how the translation
* will be handled:
* 0 = convert to CHS with fewer than 1024 cyls
* using the same method as Ontrack DiskManager.
@@ -3310,7 +3337,7 @@ done:
* -1 = similar to "0", plus redirect sector 0 to sector 1.
* >1 = convert to a CHS geometry with "xparm" heads.
*
- * Returns 0 if the translation was not possible, if the device was not
+ * Returns 0 if the translation was not possible, if the device was not
* an IDE disk drive, or if a geometry was "forced" on the commandline.
* Returns 1 if the geometry translation was successful.
*/
@@ -3621,7 +3648,7 @@ static int hwif_init (int h)
{
ide_hwif_t *hwif = &ide_hwifs[h];
void (*rfn)(void);
-
+
if (!hwif->present)
return 0;
if (!hwif->irq) {
@@ -3636,7 +3663,7 @@ static int hwif_init (int h)
return (hwif->present = 0);
}
#endif /* CONFIG_BLK_DEV_HD */
-
+
hwif->present = 0; /* we set it back to 1 if all is ok below */
switch (hwif->major) {
case IDE0_MAJOR: rfn = &do_ide0_request; break;
@@ -3691,7 +3718,7 @@ int ide_init (void)
#ifdef CONFIG_BLK_DEV_IDETAPE
idetape_register_chrdev(); /* Register character device interface to the ide tape */
#endif /* CONFIG_BLK_DEV_IDETAPE */
-
+
return 0;
}