summaryrefslogtreecommitdiff
path: root/linux/src/drivers/scsi/qlogicisp.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux/src/drivers/scsi/qlogicisp.c')
-rw-r--r--linux/src/drivers/scsi/qlogicisp.c1768
1 files changed, 1768 insertions, 0 deletions
diff --git a/linux/src/drivers/scsi/qlogicisp.c b/linux/src/drivers/scsi/qlogicisp.c
new file mode 100644
index 0000000..72aa543
--- /dev/null
+++ b/linux/src/drivers/scsi/qlogicisp.c
@@ -0,0 +1,1768 @@
+/*
+ * QLogic ISP1020 Intelligent SCSI Processor Driver (PCI)
+ * Written by Erik H. Moe, ehm@cris.com
+ * Copyright 1995, Erik H. Moe
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* Renamed and updated to 1.3.x by Michael Griffith <grif@cs.ucr.edu> */
+
+/*
+ * $Date: 1999/04/26 05:54:52 $
+ * $Revision: 1.1 $
+ *
+ * $Log: isp1020.c,v $
+ * Revision 0.5 1995/09/22 02:23:15 root
+ * do auto request sense
+ *
+ * Revision 0.4 1995/08/07 04:44:33 root
+ * supply firmware with driver.
+ * numerous bug fixes/general cleanup of code.
+ *
+ * Revision 0.3 1995/07/16 16:15:39 root
+ * added reset/abort code.
+ *
+ * Revision 0.2 1995/06/29 03:14:19 root
+ * fixed biosparam.
+ * added queue protocol.
+ *
+ * Revision 0.1 1995/06/25 01:55:45 root
+ * Initial release.
+ *
+ */
+
+#include <linux/blk.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/bios32.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/unistd.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "sd.h"
+#include "hosts.h"
+#include "qlogicisp.h"
+
+/* Configuration section *****************************************************/
+
+/* Set the following macro to 1 to reload the ISP1020's firmware. This is
+ the latest firmware provided by QLogic. This may be an earlier/later
+ revision than supplied by your board. */
+
+#define RELOAD_FIRMWARE 1
+
+/* Set the following macro to 1 to reload the ISP1020's defaults from nvram.
+ If you are not sure of your settings, leave this alone, the driver will
+ use a set of 'safe' defaults */
+
+#define USE_NVRAM_DEFAULTS 0
+
+/* Macros used for debugging */
+
+#define DEBUG_ISP1020 0
+#define DEBUG_ISP1020_INT 0
+#define DEBUG_ISP1020_SETUP 0
+#define TRACE_ISP 0
+
+#define DEFAULT_LOOP_COUNT 1000000
+
+/* End Configuration section *************************************************/
+
+#include <linux/module.h>
+
+#if TRACE_ISP
+
+# define TRACE_BUF_LEN (32*1024)
+
+struct {
+ u_long next;
+ struct {
+ u_long time;
+ u_int index;
+ u_int addr;
+ u_char * name;
+ } buf[TRACE_BUF_LEN];
+} trace;
+
+#define TRACE(w, i, a) \
+{ \
+ unsigned long flags; \
+ \
+ save_flags(flags); \
+ cli(); \
+ trace.buf[trace.next].name = (w); \
+ trace.buf[trace.next].time = jiffies; \
+ trace.buf[trace.next].index = (i); \
+ trace.buf[trace.next].addr = (long) (a); \
+ trace.next = (trace.next + 1) & (TRACE_BUF_LEN - 1); \
+ restore_flags(flags); \
+}
+
+#else
+# define TRACE(w, i, a)
+#endif
+
+#if DEBUG_ISP1020
+#define ENTER(x) printk("isp1020 : entering %s()\n", x);
+#define LEAVE(x) printk("isp1020 : leaving %s()\n", x);
+#define DEBUG(x) x
+#else
+#define ENTER(x)
+#define LEAVE(x)
+#define DEBUG(x)
+#endif /* DEBUG_ISP1020 */
+
+#if DEBUG_ISP1020_INTR
+#define ENTER_INTR(x) printk("isp1020 : entering %s()\n", x);
+#define LEAVE_INTR(x) printk("isp1020 : leaving %s()\n", x);
+#define DEBUG_INTR(x) x
+#else
+#define ENTER_INTR(x)
+#define LEAVE_INTR(x)
+#define DEBUG_INTR(x)
+#endif /* DEBUG ISP1020_INTR */
+
+#define ISP1020_REV_ID 1
+
+#define MAX_TARGETS 16
+#define MAX_LUNS 8
+
+/* host configuration and control registers */
+#define HOST_HCCR 0xc0 /* host command and control */
+
+/* pci bus interface registers */
+#define PCI_ID_LOW 0x00 /* vendor id */
+#define PCI_ID_HIGH 0x02 /* device id */
+#define ISP_CFG0 0x04 /* configuration register #0 */
+#define ISP_CFG1 0x06 /* configuration register #1 */
+#define PCI_INTF_CTL 0x08 /* pci interface control */
+#define PCI_INTF_STS 0x0a /* pci interface status */
+#define PCI_SEMAPHORE 0x0c /* pci semaphore */
+#define PCI_NVRAM 0x0e /* pci nvram interface */
+
+/* mailbox registers */
+#define MBOX0 0x70 /* mailbox 0 */
+#define MBOX1 0x72 /* mailbox 1 */
+#define MBOX2 0x74 /* mailbox 2 */
+#define MBOX3 0x76 /* mailbox 3 */
+#define MBOX4 0x78 /* mailbox 4 */
+#define MBOX5 0x7a /* mailbox 5 */
+
+/* mailbox command complete status codes */
+#define MBOX_COMMAND_COMPLETE 0x4000
+#define INVALID_COMMAND 0x4001
+#define HOST_INTERFACE_ERROR 0x4002
+#define TEST_FAILED 0x4003
+#define COMMAND_ERROR 0x4005
+#define COMMAND_PARAM_ERROR 0x4006
+
+/* async event status codes */
+#define ASYNC_SCSI_BUS_RESET 0x8001
+#define SYSTEM_ERROR 0x8002
+#define REQUEST_TRANSFER_ERROR 0x8003
+#define RESPONSE_TRANSFER_ERROR 0x8004
+#define REQUEST_QUEUE_WAKEUP 0x8005
+#define EXECUTION_TIMEOUT_RESET 0x8006
+
+struct Entry_header {
+ u_char entry_type;
+ u_char entry_cnt;
+ u_char sys_def_1;
+ u_char flags;
+};
+
+/* entry header type commands */
+#define ENTRY_COMMAND 1
+#define ENTRY_CONTINUATION 2
+#define ENTRY_STATUS 3
+#define ENTRY_MARKER 4
+#define ENTRY_EXTENDED_COMMAND 5
+
+/* entry header flag definitions */
+#define EFLAG_CONTINUATION 1
+#define EFLAG_BUSY 2
+#define EFLAG_BAD_HEADER 4
+#define EFLAG_BAD_PAYLOAD 8
+
+struct dataseg {
+ u_int d_base;
+ u_int d_count;
+};
+
+struct Command_Entry {
+ struct Entry_header hdr;
+ u_int handle;
+ u_char target_lun;
+ u_char target_id;
+ u_short cdb_length;
+ u_short control_flags;
+ u_short rsvd;
+ u_short time_out;
+ u_short segment_cnt;
+ u_char cdb[12];
+ struct dataseg dataseg[4];
+};
+
+/* command entry control flag definitions */
+#define CFLAG_NODISC 0x01
+#define CFLAG_HEAD_TAG 0x02
+#define CFLAG_ORDERED_TAG 0x04
+#define CFLAG_SIMPLE_TAG 0x08
+#define CFLAG_TAR_RTN 0x10
+#define CFLAG_READ 0x20
+#define CFLAG_WRITE 0x40
+
+struct Ext_Command_Entry {
+ struct Entry_header hdr;
+ u_int handle;
+ u_char target_lun;
+ u_char target_id;
+ u_short cdb_length;
+ u_short control_flags;
+ u_short rsvd;
+ u_short time_out;
+ u_short segment_cnt;
+ u_char cdb[44];
+};
+
+struct Continuation_Entry {
+ struct Entry_header hdr;
+ u_int reserved;
+ struct dataseg dataseg[7];
+};
+
+struct Marker_Entry {
+ struct Entry_header hdr;
+ u_int reserved;
+ u_char target_lun;
+ u_char target_id;
+ u_char modifier;
+ u_char rsvd;
+ u_char rsvds[52];
+};
+
+/* marker entry modifier definitions */
+#define SYNC_DEVICE 0
+#define SYNC_TARGET 1
+#define SYNC_ALL 2
+
+struct Status_Entry {
+ struct Entry_header hdr;
+ u_int handle;
+ u_short scsi_status;
+ u_short completion_status;
+ u_short state_flags;
+ u_short status_flags;
+ u_short time;
+ u_short req_sense_len;
+ u_int residual;
+ u_char rsvd[8];
+ u_char req_sense_data[32];
+};
+
+/* status entry completion status definitions */
+#define CS_COMPLETE 0x0000
+#define CS_INCOMPLETE 0x0001
+#define CS_DMA_ERROR 0x0002
+#define CS_TRANSPORT_ERROR 0x0003
+#define CS_RESET_OCCURRED 0x0004
+#define CS_ABORTED 0x0005
+#define CS_TIMEOUT 0x0006
+#define CS_DATA_OVERRUN 0x0007
+#define CS_COMMAND_OVERRUN 0x0008
+#define CS_STATUS_OVERRUN 0x0009
+#define CS_BAD_MESSAGE 0x000a
+#define CS_NO_MESSAGE_OUT 0x000b
+#define CS_EXT_ID_FAILED 0x000c
+#define CS_IDE_MSG_FAILED 0x000d
+#define CS_ABORT_MSG_FAILED 0x000e
+#define CS_REJECT_MSG_FAILED 0x000f
+#define CS_NOP_MSG_FAILED 0x0010
+#define CS_PARITY_ERROR_MSG_FAILED 0x0011
+#define CS_DEVICE_RESET_MSG_FAILED 0x0012
+#define CS_ID_MSG_FAILED 0x0013
+#define CS_UNEXP_BUS_FREE 0x0014
+/* as per app note #83120-514-06a: */
+#define CS_DATA_UNDERRUN 0x0015
+#define CS_INVALID_ENTRY_TYPE 0x001b
+#define CS_DEVICE_QUEUE_FULL 0x001c
+#define CS_SCSI_PHASE_SKIPPED 0x001d
+#define CS_ARS_FAILED 0x001e /* auto Req. Sense failed */
+
+/* status entry state flag definitions */
+#define SF_GOT_BUS 0x0100
+#define SF_GOT_TARGET 0x0200
+#define SF_SENT_CDB 0x0400
+#define SF_TRANSFERRED_DATA 0x0800
+#define SF_GOT_STATUS 0x1000
+#define SF_GOT_SENSE 0x2000
+
+/* status entry status flag definitions */
+#define STF_DISCONNECT 0x0001
+#define STF_SYNCHRONOUS 0x0002
+#define STF_PARITY_ERROR 0x0004
+#define STF_BUS_RESET 0x0008
+#define STF_DEVICE_RESET 0x0010
+#define STF_ABORTED 0x0020
+#define STF_TIMEOUT 0x0040
+#define STF_NEGOTIATION 0x0080
+
+/* interface control commands */
+#define ISP_RESET 0x0001
+#define ISP_EN_INT 0x0002
+#define ISP_EN_RISC 0x0004
+
+/* host control commands */
+#define HCCR_NOP 0x0000
+#define HCCR_RESET 0x1000
+#define HCCR_PAUSE 0x2000
+#define HCCR_RELEASE 0x3000
+#define HCCR_SINGLE_STEP 0x4000
+#define HCCR_SET_HOST_INTR 0x5000
+#define HCCR_CLEAR_HOST_INTR 0x6000
+#define HCCR_CLEAR_RISC_INTR 0x7000
+#define HCCR_BP_ENABLE 0x8000
+#define HCCR_BIOS_DISABLE 0x9000
+#define HCCR_TEST_MODE 0xf000
+
+#define RISC_BUSY 0x0004
+
+/* mailbox commands */
+#define MBOX_NO_OP 0x0000
+#define MBOX_LOAD_RAM 0x0001
+#define MBOX_EXEC_FIRMWARE 0x0002
+#define MBOX_DUMP_RAM 0x0003
+#define MBOX_WRITE_RAM_WORD 0x0004
+#define MBOX_READ_RAM_WORD 0x0005
+#define MBOX_MAILBOX_REG_TEST 0x0006
+#define MBOX_VERIFY_CHECKSUM 0x0007
+#define MBOX_ABOUT_FIRMWARE 0x0008
+#define MBOX_CHECK_FIRMWARE 0x000e
+#define MBOX_INIT_REQ_QUEUE 0x0010
+#define MBOX_INIT_RES_QUEUE 0x0011
+#define MBOX_EXECUTE_IOCB 0x0012
+#define MBOX_WAKE_UP 0x0013
+#define MBOX_STOP_FIRMWARE 0x0014
+#define MBOX_ABORT 0x0015
+#define MBOX_ABORT_DEVICE 0x0016
+#define MBOX_ABORT_TARGET 0x0017
+#define MBOX_BUS_RESET 0x0018
+#define MBOX_STOP_QUEUE 0x0019
+#define MBOX_START_QUEUE 0x001a
+#define MBOX_SINGLE_STEP_QUEUE 0x001b
+#define MBOX_ABORT_QUEUE 0x001c
+#define MBOX_GET_DEV_QUEUE_STATUS 0x001d
+#define MBOX_GET_FIRMWARE_STATUS 0x001f
+#define MBOX_GET_INIT_SCSI_ID 0x0020
+#define MBOX_GET_SELECT_TIMEOUT 0x0021
+#define MBOX_GET_RETRY_COUNT 0x0022
+#define MBOX_GET_TAG_AGE_LIMIT 0x0023
+#define MBOX_GET_CLOCK_RATE 0x0024
+#define MBOX_GET_ACT_NEG_STATE 0x0025
+#define MBOX_GET_ASYNC_DATA_SETUP_TIME 0x0026
+#define MBOX_GET_PCI_PARAMS 0x0027
+#define MBOX_GET_TARGET_PARAMS 0x0028
+#define MBOX_GET_DEV_QUEUE_PARAMS 0x0029
+#define MBOX_SET_INIT_SCSI_ID 0x0030
+#define MBOX_SET_SELECT_TIMEOUT 0x0031
+#define MBOX_SET_RETRY_COUNT 0x0032
+#define MBOX_SET_TAG_AGE_LIMIT 0x0033
+#define MBOX_SET_CLOCK_RATE 0x0034
+#define MBOX_SET_ACTIVE_NEG_STATE 0x0035
+#define MBOX_SET_ASYNC_DATA_SETUP_TIME 0x0036
+#define MBOX_SET_PCI_CONTROL_PARAMS 0x0037
+#define MBOX_SET_TARGET_PARAMS 0x0038
+#define MBOX_SET_DEV_QUEUE_PARAMS 0x0039
+#define MBOX_RETURN_BIOS_BLOCK_ADDR 0x0040
+#define MBOX_WRITE_FOUR_RAM_WORDS 0x0041
+#define MBOX_EXEC_BIOS_IOCB 0x0042
+
+#include "qlogicisp_asm.c"
+
+#define PACKB(a, b) (((a)<<4)|(b))
+
+const u_char mbox_param[] = {
+ PACKB(1, 1), /* MBOX_NO_OP */
+ PACKB(5, 5), /* MBOX_LOAD_RAM */
+ PACKB(2, 0), /* MBOX_EXEC_FIRMWARE */
+ PACKB(5, 5), /* MBOX_DUMP_RAM */
+ PACKB(3, 3), /* MBOX_WRITE_RAM_WORD */
+ PACKB(2, 3), /* MBOX_READ_RAM_WORD */
+ PACKB(6, 6), /* MBOX_MAILBOX_REG_TEST */
+ PACKB(2, 3), /* MBOX_VERIFY_CHECKSUM */
+ PACKB(1, 3), /* MBOX_ABOUT_FIRMWARE */
+ PACKB(0, 0), /* 0x0009 */
+ PACKB(0, 0), /* 0x000a */
+ PACKB(0, 0), /* 0x000b */
+ PACKB(0, 0), /* 0x000c */
+ PACKB(0, 0), /* 0x000d */
+ PACKB(1, 2), /* MBOX_CHECK_FIRMWARE */
+ PACKB(0, 0), /* 0x000f */
+ PACKB(5, 5), /* MBOX_INIT_REQ_QUEUE */
+ PACKB(6, 6), /* MBOX_INIT_RES_QUEUE */
+ PACKB(4, 4), /* MBOX_EXECUTE_IOCB */
+ PACKB(2, 2), /* MBOX_WAKE_UP */
+ PACKB(1, 6), /* MBOX_STOP_FIRMWARE */
+ PACKB(4, 4), /* MBOX_ABORT */
+ PACKB(2, 2), /* MBOX_ABORT_DEVICE */
+ PACKB(3, 3), /* MBOX_ABORT_TARGET */
+ PACKB(2, 2), /* MBOX_BUS_RESET */
+ PACKB(2, 3), /* MBOX_STOP_QUEUE */
+ PACKB(2, 3), /* MBOX_START_QUEUE */
+ PACKB(2, 3), /* MBOX_SINGLE_STEP_QUEUE */
+ PACKB(2, 3), /* MBOX_ABORT_QUEUE */
+ PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_STATUS */
+ PACKB(0, 0), /* 0x001e */
+ PACKB(1, 3), /* MBOX_GET_FIRMWARE_STATUS */
+ PACKB(1, 2), /* MBOX_GET_INIT_SCSI_ID */
+ PACKB(1, 2), /* MBOX_GET_SELECT_TIMEOUT */
+ PACKB(1, 3), /* MBOX_GET_RETRY_COUNT */
+ PACKB(1, 2), /* MBOX_GET_TAG_AGE_LIMIT */
+ PACKB(1, 2), /* MBOX_GET_CLOCK_RATE */
+ PACKB(1, 2), /* MBOX_GET_ACT_NEG_STATE */
+ PACKB(1, 2), /* MBOX_GET_ASYNC_DATA_SETUP_TIME */
+ PACKB(1, 3), /* MBOX_GET_PCI_PARAMS */
+ PACKB(2, 4), /* MBOX_GET_TARGET_PARAMS */
+ PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_PARAMS */
+ PACKB(0, 0), /* 0x002a */
+ PACKB(0, 0), /* 0x002b */
+ PACKB(0, 0), /* 0x002c */
+ PACKB(0, 0), /* 0x002d */
+ PACKB(0, 0), /* 0x002e */
+ PACKB(0, 0), /* 0x002f */
+ PACKB(2, 2), /* MBOX_SET_INIT_SCSI_ID */
+ PACKB(2, 2), /* MBOX_SET_SELECT_TIMEOUT */
+ PACKB(3, 3), /* MBOX_SET_RETRY_COUNT */
+ PACKB(2, 2), /* MBOX_SET_TAG_AGE_LIMIT */
+ PACKB(2, 2), /* MBOX_SET_CLOCK_RATE */
+ PACKB(2, 2), /* MBOX_SET_ACTIVE_NEG_STATE */
+ PACKB(2, 2), /* MBOX_SET_ASYNC_DATA_SETUP_TIME */
+ PACKB(3, 3), /* MBOX_SET_PCI_CONTROL_PARAMS */
+ PACKB(4, 4), /* MBOX_SET_TARGET_PARAMS */
+ PACKB(4, 4), /* MBOX_SET_DEV_QUEUE_PARAMS */
+ PACKB(0, 0), /* 0x003a */
+ PACKB(0, 0), /* 0x003b */
+ PACKB(0, 0), /* 0x003c */
+ PACKB(0, 0), /* 0x003d */
+ PACKB(0, 0), /* 0x003e */
+ PACKB(0, 0), /* 0x003f */
+ PACKB(1, 2), /* MBOX_RETURN_BIOS_BLOCK_ADDR */
+ PACKB(6, 1), /* MBOX_WRITE_FOUR_RAM_WORDS */
+ PACKB(2, 3) /* MBOX_EXEC_BIOS_IOCB */
+};
+
+#define MAX_MBOX_COMMAND (sizeof(mbox_param)/sizeof(u_short))
+
+struct host_param {
+ u_short fifo_threshold;
+ u_short host_adapter_enable;
+ u_short initiator_scsi_id;
+ u_short bus_reset_delay;
+ u_short retry_count;
+ u_short retry_delay;
+ u_short async_data_setup_time;
+ u_short req_ack_active_negation;
+ u_short data_line_active_negation;
+ u_short data_dma_burst_enable;
+ u_short command_dma_burst_enable;
+ u_short tag_aging;
+ u_short selection_timeout;
+ u_short max_queue_depth;
+};
+
+/*
+ * Device Flags:
+ *
+ * Bit Name
+ * ---------
+ * 7 Disconnect Privilege
+ * 6 Parity Checking
+ * 5 Wide Data Transfers
+ * 4 Synchronous Data Transfers
+ * 3 Tagged Queuing
+ * 2 Automatic Request Sense
+ * 1 Stop Queue on Check Condition
+ * 0 Renegotiate on Error
+ */
+
+struct dev_param {
+ u_short device_flags;
+ u_short execution_throttle;
+ u_short synchronous_period;
+ u_short synchronous_offset;
+ u_short device_enable;
+ u_short reserved; /* pad */
+};
+
+/*
+ * The result queue can be quite a bit smaller since continuation entries
+ * do not show up there:
+ */
+#define RES_QUEUE_LEN ((QLOGICISP_REQ_QUEUE_LEN + 1) / 8 - 1)
+#define QUEUE_ENTRY_LEN 64
+
+struct isp1020_hostdata {
+ u_char bus;
+ u_char revision;
+ u_char device_fn;
+ struct host_param host_param;
+ struct dev_param dev_param[MAX_TARGETS];
+
+ /* result and request queues (shared with isp1020): */
+ u_int req_in_ptr; /* index of next request slot */
+ u_int res_out_ptr; /* index of next result slot */
+
+ /* this is here so the queues are nicely aligned */
+ long send_marker; /* do we need to send a marker? */
+
+ char res[RES_QUEUE_LEN+1][QUEUE_ENTRY_LEN];
+ char req[QLOGICISP_REQ_QUEUE_LEN+1][QUEUE_ENTRY_LEN];
+};
+
+/* queue length's _must_ be power of two: */
+#define QUEUE_DEPTH(in, out, ql) ((in - out) & (ql))
+#define REQ_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, \
+ QLOGICISP_REQ_QUEUE_LEN)
+#define RES_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, RES_QUEUE_LEN)
+
+struct Scsi_Host *irq2host[NR_IRQS];
+
+static void isp1020_enable_irqs(struct Scsi_Host *);
+static void isp1020_disable_irqs(struct Scsi_Host *);
+static int isp1020_init(struct Scsi_Host *);
+static int isp1020_reset_hardware(struct Scsi_Host *);
+static int isp1020_set_defaults(struct Scsi_Host *);
+static int isp1020_load_parameters(struct Scsi_Host *);
+static int isp1020_mbox_command(struct Scsi_Host *, u_short []);
+static int isp1020_return_status(struct Status_Entry *);
+static void isp1020_intr_handler(int, void *, struct pt_regs *);
+
+#if USE_NVRAM_DEFAULTS
+static int isp1020_get_defaults(struct Scsi_Host *);
+static int isp1020_verify_nvram(struct Scsi_Host *);
+static u_short isp1020_read_nvram_word(struct Scsi_Host *, u_short);
+#endif
+
+#if DEBUG_ISP1020
+static void isp1020_print_scsi_cmd(Scsi_Cmnd *);
+#endif
+#if DEBUG_ISP1020_INTR
+static void isp1020_print_status_entry(struct Status_Entry *);
+#endif
+
+static struct proc_dir_entry proc_scsi_isp1020 = {
+ PROC_SCSI_QLOGICISP, 7, "isp1020",
+ S_IFDIR | S_IRUGO | S_IXUGO, 2
+};
+
+
+static inline void isp1020_enable_irqs(struct Scsi_Host *host)
+{
+ outw(ISP_EN_INT|ISP_EN_RISC, host->io_port + PCI_INTF_CTL);
+}
+
+
+static inline void isp1020_disable_irqs(struct Scsi_Host *host)
+{
+ outw(0x0, host->io_port + PCI_INTF_CTL);
+}
+
+
+int isp1020_detect(Scsi_Host_Template *tmpt)
+{
+ int hosts = 0;
+ u_short index;
+ u_char bus, device_fn;
+ struct Scsi_Host *host;
+ struct isp1020_hostdata *hostdata;
+
+ ENTER("isp1020_detect");
+
+ tmpt->proc_dir = &proc_scsi_isp1020;
+
+ if (pcibios_present() == 0) {
+ printk("qlogicisp : PCI bios not present\n");
+ return 0;
+ }
+
+ memset(irq2host, 0, sizeof(irq2host));
+
+ for (index = 0; pcibios_find_device(PCI_VENDOR_ID_QLOGIC,
+ PCI_DEVICE_ID_QLOGIC_ISP1020,
+ index, &bus, &device_fn) == 0;
+ index++)
+ {
+ host = scsi_register(tmpt, sizeof(struct isp1020_hostdata));
+ hostdata = (struct isp1020_hostdata *) host->hostdata;
+
+ memset(hostdata, 0, sizeof(struct isp1020_hostdata));
+ hostdata->bus = bus;
+ hostdata->device_fn = device_fn;
+
+ if (isp1020_init(host) || isp1020_reset_hardware(host)
+#if USE_NVRAM_DEFAULTS
+ || isp1020_get_defaults(host)
+#else
+ || isp1020_set_defaults(host)
+#endif /* USE_NVRAM_DEFAULTS */
+ || isp1020_load_parameters(host)) {
+ scsi_unregister(host);
+ continue;
+ }
+
+ host->this_id = hostdata->host_param.initiator_scsi_id;
+
+ if (request_irq(host->irq, isp1020_intr_handler, SA_INTERRUPT,
+ "qlogicisp", NULL))
+ {
+ printk("qlogicisp : interrupt %d already in use\n",
+ host->irq);
+ scsi_unregister(host);
+ continue;
+ }
+
+ if (check_region(host->io_port, 0xff)) {
+ printk("qlogicisp : i/o region 0x%04x-0x%04x already "
+ "in use\n",
+ host->io_port, host->io_port + 0xff);
+ free_irq(host->irq, NULL);
+ scsi_unregister(host);
+ continue;
+ }
+
+ request_region(host->io_port, 0xff, "qlogicisp");
+ irq2host[host->irq] = host;
+
+ outw(0x0, host->io_port + PCI_SEMAPHORE);
+ outw(HCCR_CLEAR_RISC_INTR, host->io_port + HOST_HCCR);
+ isp1020_enable_irqs(host);
+
+ hosts++;
+ }
+
+ LEAVE("isp1020_detect");
+
+ return hosts;
+}
+
+
+int isp1020_release(struct Scsi_Host *host)
+{
+ struct isp1020_hostdata *hostdata;
+
+ ENTER("isp1020_release");
+
+ hostdata = (struct isp1020_hostdata *) host->hostdata;
+
+ outw(0x0, host->io_port + PCI_INTF_CTL);
+ free_irq(host->irq, NULL);
+
+ release_region(host->io_port, 0xff);
+
+ LEAVE("isp1020_release");
+
+ return 0;
+}
+
+
+const char *isp1020_info(struct Scsi_Host *host)
+{
+ static char buf[80];
+ struct isp1020_hostdata *hostdata;
+
+ ENTER("isp1020_info");
+
+ hostdata = (struct isp1020_hostdata *) host->hostdata;
+ sprintf(buf,
+ "QLogic ISP1020 SCSI on PCI bus %d device %d irq %d base 0x%x",
+ hostdata->bus, (hostdata->device_fn & 0xf8) >> 3, host->irq,
+ host->io_port);
+
+ LEAVE("isp1020_info");
+
+ return buf;
+}
+
+
+/*
+ * The middle SCSI layer ensures that queuecommand never gets invoked
+ * concurrently with itself or the interrupt handler (though the
+ * interrupt handler may call this routine as part of
+ * request-completion handling).
+ */
+int isp1020_queuecommand(Scsi_Cmnd *Cmnd, void (*done)(Scsi_Cmnd *))
+{
+ int i, sg_count, n, num_free;
+ u_int in_ptr, out_ptr;
+ struct dataseg * ds;
+ struct scatterlist *sg;
+ struct Command_Entry *cmd;
+ struct Continuation_Entry *cont;
+ struct Scsi_Host *host;
+ struct isp1020_hostdata *hostdata;
+
+ ENTER("isp1020_queuecommand");
+
+ host = Cmnd->host;
+ hostdata = (struct isp1020_hostdata *) host->hostdata;
+ Cmnd->scsi_done = done;
+
+ DEBUG(isp1020_print_scsi_cmd(Cmnd));
+
+ out_ptr = inw(host->io_port + MBOX4);
+ in_ptr = hostdata->req_in_ptr;
+
+ DEBUG(printk("qlogicisp : request queue depth %d\n",
+ REQ_QUEUE_DEPTH(in_ptr, out_ptr)));
+
+ cmd = (struct Command_Entry *) &hostdata->req[in_ptr][0];
+ in_ptr = (in_ptr + 1) & QLOGICISP_REQ_QUEUE_LEN;
+ if (in_ptr == out_ptr) {
+ printk("qlogicisp : request queue overflow\n");
+ return 1;
+ }
+
+ if (hostdata->send_marker) {
+ struct Marker_Entry *marker;
+
+ TRACE("queue marker", in_ptr, 0);
+
+ DEBUG(printk("qlogicisp : adding marker entry\n"));
+ marker = (struct Marker_Entry *) cmd;
+ memset(marker, 0, sizeof(struct Marker_Entry));
+
+ marker->hdr.entry_type = ENTRY_MARKER;
+ marker->hdr.entry_cnt = 1;
+ marker->modifier = SYNC_ALL;
+
+ hostdata->send_marker = 0;
+
+ if (((in_ptr + 1) & QLOGICISP_REQ_QUEUE_LEN) == out_ptr) {
+ outw(in_ptr, host->io_port + MBOX4);
+ hostdata->req_in_ptr = in_ptr;
+ printk("qlogicisp : request queue overflow\n");
+ return 1;
+ }
+ cmd = (struct Command_Entry *) &hostdata->req[in_ptr][0];
+ in_ptr = (in_ptr + 1) & QLOGICISP_REQ_QUEUE_LEN;
+ }
+
+ TRACE("queue command", in_ptr, Cmnd);
+
+ memset(cmd, 0, sizeof(struct Command_Entry));
+
+ cmd->hdr.entry_type = ENTRY_COMMAND;
+ cmd->hdr.entry_cnt = 1;
+
+ cmd->handle = (u_int) virt_to_bus(Cmnd);
+ cmd->target_lun = Cmnd->lun;
+ cmd->target_id = Cmnd->target;
+ cmd->cdb_length = Cmnd->cmd_len;
+ cmd->control_flags = CFLAG_READ | CFLAG_WRITE;
+ cmd->time_out = 30;
+
+ memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len);
+
+ if (Cmnd->use_sg) {
+ cmd->segment_cnt = sg_count = Cmnd->use_sg;
+ sg = (struct scatterlist *) Cmnd->request_buffer;
+ ds = cmd->dataseg;
+
+ /* fill in first four sg entries: */
+ n = sg_count;
+ if (n > 4)
+ n = 4;
+ for (i = 0; i < n; i++) {
+ ds[i].d_base = (u_int) virt_to_bus(sg->address);
+ ds[i].d_count = sg->length;
+ ++sg;
+ }
+ sg_count -= 4;
+
+ while (sg_count > 0) {
+ ++cmd->hdr.entry_cnt;
+ cont = (struct Continuation_Entry *)
+ &hostdata->req[in_ptr][0];
+ in_ptr = (in_ptr + 1) & QLOGICISP_REQ_QUEUE_LEN;
+ if (in_ptr == out_ptr) {
+ printk("isp1020: unexpected request queue "
+ "overflow\n");
+ return 1;
+ }
+ TRACE("queue continuation", in_ptr, 0);
+ cont->hdr.entry_type = ENTRY_CONTINUATION;
+ cont->hdr.entry_cnt = 0;
+ cont->hdr.sys_def_1 = 0;
+ cont->hdr.flags = 0;
+ cont->reserved = 0;
+ ds = cont->dataseg;
+ n = sg_count;
+ if (n > 7)
+ n = 7;
+ for (i = 0; i < n; ++i) {
+ ds[i].d_base = (u_int)virt_to_bus(sg->address);
+ ds[i].d_count = sg->length;
+ ++sg;
+ }
+ sg_count -= n;
+ }
+ } else {
+ cmd->dataseg[0].d_base =
+ (u_int) virt_to_bus(Cmnd->request_buffer);
+ cmd->dataseg[0].d_count =
+ (u_int) Cmnd->request_bufflen;
+ cmd->segment_cnt = 1;
+ }
+
+ outw(in_ptr, host->io_port + MBOX4);
+ hostdata->req_in_ptr = in_ptr;
+
+ num_free = QLOGICISP_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr);
+ host->can_queue = host->host_busy + num_free;
+ host->sg_tablesize = QLOGICISP_MAX_SG(num_free);
+
+ LEAVE("isp1020_queuecommand");
+
+ return 0;
+}
+
+
+#define ASYNC_EVENT_INTERRUPT 0x01
+
+void isp1020_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ Scsi_Cmnd *Cmnd;
+ struct Status_Entry *sts;
+ struct Scsi_Host *host;
+ struct isp1020_hostdata *hostdata;
+ u_int in_ptr, out_ptr;
+ u_short status;
+
+ ENTER_INTR("isp1020_intr_handler");
+
+ host = irq2host[irq];
+ if (!host) {
+ printk("qlogicisp : unexpected interrupt on line %d\n", irq);
+ return;
+ }
+ hostdata = (struct isp1020_hostdata *) host->hostdata;
+
+ DEBUG_INTR(printk("qlogicisp : interrupt on line %d\n", irq));
+
+ if (!(inw(host->io_port + PCI_INTF_STS) & 0x04)) {
+ /* spurious interrupts can happen legally */
+ DEBUG_INTR(printk("qlogicisp: got spurious interrupt\n"));
+ return;
+ }
+ in_ptr = inw(host->io_port + MBOX5);
+ outw(HCCR_CLEAR_RISC_INTR, host->io_port + HOST_HCCR);
+
+ if ((inw(host->io_port + PCI_SEMAPHORE) & ASYNC_EVENT_INTERRUPT)) {
+ status = inw(host->io_port + MBOX0);
+
+ DEBUG_INTR(printk("qlogicisp : mbox completion status: %x\n",
+ status));
+
+ switch (status) {
+ case ASYNC_SCSI_BUS_RESET:
+ case EXECUTION_TIMEOUT_RESET:
+ hostdata->send_marker = 1;
+ break;
+ case INVALID_COMMAND:
+ case HOST_INTERFACE_ERROR:
+ case COMMAND_ERROR:
+ case COMMAND_PARAM_ERROR:
+ printk("qlogicisp : bad mailbox return status\n");
+ break;
+ }
+ outw(0x0, host->io_port + PCI_SEMAPHORE);
+ }
+ out_ptr = hostdata->res_out_ptr;
+
+ DEBUG_INTR(printk("qlogicisp : response queue update\n"));
+ DEBUG_INTR(printk("qlogicisp : response queue depth %d\n",
+ QUEUE_DEPTH(in_ptr, out_ptr)));
+
+ while (out_ptr != in_ptr) {
+ sts = (struct Status_Entry *) &hostdata->res[out_ptr][0];
+ out_ptr = (out_ptr + 1) & RES_QUEUE_LEN;
+
+ Cmnd = (Scsi_Cmnd *) bus_to_virt(sts->handle);
+
+ TRACE("done", out_ptr, Cmnd);
+
+ if (sts->completion_status == CS_RESET_OCCURRED
+ || sts->completion_status == CS_ABORTED
+ || (sts->status_flags & STF_BUS_RESET))
+ hostdata->send_marker = 1;
+
+ if (sts->state_flags & SF_GOT_SENSE)
+ memcpy(Cmnd->sense_buffer, sts->req_sense_data,
+ sizeof(Cmnd->sense_buffer));
+
+ DEBUG_INTR(isp1020_print_status_entry(sts));
+
+ if (sts->hdr.entry_type == ENTRY_STATUS)
+ Cmnd->result = isp1020_return_status(sts);
+ else
+ Cmnd->result = DID_ERROR << 16;
+
+ outw(out_ptr, host->io_port + MBOX5);
+ (*Cmnd->scsi_done)(Cmnd);
+ }
+ hostdata->res_out_ptr = out_ptr;
+
+ LEAVE_INTR("isp1020_intr_handler");
+}
+
+
+static int isp1020_return_status(struct Status_Entry *sts)
+{
+ int host_status = DID_ERROR;
+#if DEBUG_ISP1020_INTR
+ static char *reason[] = {
+ "DID_OK",
+ "DID_NO_CONNECT",
+ "DID_BUS_BUSY",
+ "DID_TIME_OUT",
+ "DID_BAD_TARGET",
+ "DID_ABORT",
+ "DID_PARITY",
+ "DID_ERROR",
+ "DID_RESET",
+ "DID_BAD_INTR"
+ };
+#endif /* DEBUG_ISP1020_INTR */
+
+ ENTER("isp1020_return_status");
+
+ DEBUG(printk("qlogicisp : completion status = 0x%04x\n",
+ sts->completion_status));
+
+ switch(sts->completion_status) {
+ case CS_COMPLETE:
+ host_status = DID_OK;
+ break;
+ case CS_INCOMPLETE:
+ if (!(sts->state_flags & SF_GOT_BUS))
+ host_status = DID_NO_CONNECT;
+ else if (!(sts->state_flags & SF_GOT_TARGET))
+ host_status = DID_BAD_TARGET;
+ else if (!(sts->state_flags & SF_SENT_CDB))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_TRANSFERRED_DATA))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_GOT_STATUS))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_GOT_SENSE))
+ host_status = DID_ERROR;
+ break;
+ case CS_DMA_ERROR:
+ case CS_TRANSPORT_ERROR:
+ host_status = DID_ERROR;
+ break;
+ case CS_RESET_OCCURRED:
+ host_status = DID_RESET;
+ break;
+ case CS_ABORTED:
+ host_status = DID_ABORT;
+ break;
+ case CS_TIMEOUT:
+ host_status = DID_TIME_OUT;
+ break;
+ case CS_DATA_OVERRUN:
+ case CS_COMMAND_OVERRUN:
+ case CS_STATUS_OVERRUN:
+ case CS_BAD_MESSAGE:
+ case CS_NO_MESSAGE_OUT:
+ case CS_EXT_ID_FAILED:
+ case CS_IDE_MSG_FAILED:
+ case CS_ABORT_MSG_FAILED:
+ case CS_NOP_MSG_FAILED:
+ case CS_PARITY_ERROR_MSG_FAILED:
+ case CS_DEVICE_RESET_MSG_FAILED:
+ case CS_ID_MSG_FAILED:
+ case CS_UNEXP_BUS_FREE:
+ case CS_INVALID_ENTRY_TYPE:
+ case CS_DEVICE_QUEUE_FULL:
+ case CS_SCSI_PHASE_SKIPPED:
+ case CS_ARS_FAILED:
+ host_status = DID_ERROR;
+ break;
+ case CS_DATA_UNDERRUN:
+ host_status = DID_OK;
+ break;
+ default:
+ printk("qlogicisp : unknown completion status 0x%04x\n",
+ sts->completion_status);
+ host_status = DID_ERROR;
+ break;
+ }
+
+ DEBUG_INTR(printk("qlogicisp : host status (%s) scsi status %x\n",
+ reason[host_status], sts->scsi_status));
+
+ LEAVE("isp1020_return_status");
+
+ return (sts->scsi_status & STATUS_MASK) | (host_status << 16);
+}
+
+
+int isp1020_abort(Scsi_Cmnd *Cmnd)
+{
+ u_short param[6];
+ struct Scsi_Host *host;
+ struct isp1020_hostdata *hostdata;
+ int return_status = SCSI_ABORT_SUCCESS;
+ u_int cmdaddr = virt_to_bus(Cmnd);
+
+ ENTER("isp1020_abort");
+
+ host = Cmnd->host;
+ hostdata = (struct isp1020_hostdata *) host->hostdata;
+
+ isp1020_disable_irqs(host);
+
+ param[0] = MBOX_ABORT;
+ param[1] = (((u_short) Cmnd->target) << 8) | Cmnd->lun;
+ param[2] = cmdaddr >> 16;
+ param[3] = cmdaddr & 0xffff;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ printk("qlogicisp : scsi abort failure: %x\n", param[0]);
+ return_status = SCSI_ABORT_ERROR;
+ }
+
+ isp1020_enable_irqs(host);
+
+ LEAVE("isp1020_abort");
+
+ return return_status;
+}
+
+
+int isp1020_reset(Scsi_Cmnd *Cmnd, unsigned int reset_flags)
+{
+ u_short param[6];
+ struct Scsi_Host *host;
+ struct isp1020_hostdata *hostdata;
+ int return_status = SCSI_RESET_SUCCESS;
+
+ ENTER("isp1020_reset");
+
+ host = Cmnd->host;
+ hostdata = (struct isp1020_hostdata *) host->hostdata;
+
+ param[0] = MBOX_BUS_RESET;
+ param[1] = hostdata->host_param.bus_reset_delay;
+
+ isp1020_disable_irqs(host);
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ printk("qlogicisp : scsi bus reset failure: %x\n", param[0]);
+ return_status = SCSI_RESET_ERROR;
+ }
+
+ isp1020_enable_irqs(host);
+
+ LEAVE("isp1020_reset");
+
+ return return_status;;
+}
+
+
+int isp1020_biosparam(Disk *disk, kdev_t n, int ip[])
+{
+ int size = disk->capacity;
+
+ ENTER("isp1020_biosparam");
+
+ ip[0] = 64;
+ ip[1] = 32;
+ ip[2] = size >> 11;
+ if (ip[2] > 1024) {
+ ip[0] = 255;
+ ip[1] = 63;
+ ip[2] = size / (ip[0] * ip[1]);
+ if (ip[2] > 1023)
+ ip[2] = 1023;
+ }
+
+ LEAVE("isp1020_biosparam");
+
+ return 0;
+}
+
+
+static int isp1020_reset_hardware(struct Scsi_Host *host)
+{
+ u_short param[6];
+ int loop_count;
+
+ ENTER("isp1020_reset_hardware");
+
+ outw(ISP_RESET, host->io_port + PCI_INTF_CTL);
+ outw(HCCR_RESET, host->io_port + HOST_HCCR);
+ outw(HCCR_RELEASE, host->io_port + HOST_HCCR);
+ outw(HCCR_BIOS_DISABLE, host->io_port + HOST_HCCR);
+
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && inw(host->io_port + HOST_HCCR) == RISC_BUSY)
+ barrier();
+ if (!loop_count)
+ printk("qlogicisp: reset_hardware loop timeout\n");
+
+ outw(0, host->io_port + ISP_CFG1);
+
+#if DEBUG_ISP1020
+ printk("qlogicisp : mbox 0 0x%04x \n", inw(host->io_port + MBOX0));
+ printk("qlogicisp : mbox 1 0x%04x \n", inw(host->io_port + MBOX1));
+ printk("qlogicisp : mbox 2 0x%04x \n", inw(host->io_port + MBOX2));
+ printk("qlogicisp : mbox 3 0x%04x \n", inw(host->io_port + MBOX3));
+ printk("qlogicisp : mbox 4 0x%04x \n", inw(host->io_port + MBOX4));
+ printk("qlogicisp : mbox 5 0x%04x \n", inw(host->io_port + MBOX5));
+#endif /* DEBUG_ISP1020 */
+
+ DEBUG(printk("qlogicisp : loading risc ram\n"));
+
+#if RELOAD_FIRMWARE
+ {
+ int i;
+ for (i = 0; i < risc_code_length01; i++) {
+ param[0] = MBOX_WRITE_RAM_WORD;
+ param[1] = risc_code_addr01 + i;
+ param[2] = risc_code01[i];
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ printk("qlogicisp : firmware load failure\n");
+ return 1;
+ }
+ }
+ }
+#endif /* RELOAD_FIRMWARE */
+
+ DEBUG(printk("qlogicisp : verifying checksum\n"));
+
+ param[0] = MBOX_VERIFY_CHECKSUM;
+ param[1] = risc_code_addr01;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ printk("qlogicisp : ram checksum failure\n");
+ return 1;
+ }
+
+ DEBUG(printk("qlogicisp : executing firmware\n"));
+
+ param[0] = MBOX_EXEC_FIRMWARE;
+ param[1] = risc_code_addr01;
+
+ isp1020_mbox_command(host, param);
+
+ param[0] = MBOX_ABOUT_FIRMWARE;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ printk("qlogicisp : about firmware failure\n");
+ return 1;
+ }
+
+ DEBUG(printk("qlogicisp : firmware major revision %d\n", param[1]));
+ DEBUG(printk("qlogicisp : firmware minor revision %d\n", param[2]));
+
+ LEAVE("isp1020_reset_hardware");
+
+ return 0;
+}
+
+
+static int isp1020_init(struct Scsi_Host *sh)
+{
+ u_int io_base;
+ struct isp1020_hostdata *hostdata;
+ u_char bus, device_fn, revision, irq;
+ u_short vendor_id, device_id, command;
+
+ ENTER("isp1020_init");
+
+ hostdata = (struct isp1020_hostdata *) sh->hostdata;
+ bus = hostdata->bus;
+ device_fn = hostdata->device_fn;
+
+ if (pcibios_read_config_word(bus, device_fn, PCI_VENDOR_ID, &vendor_id)
+ || pcibios_read_config_word(bus, device_fn,
+ PCI_DEVICE_ID, &device_id)
+ || pcibios_read_config_word(bus, device_fn,
+ PCI_COMMAND, &command)
+ || pcibios_read_config_dword(bus, device_fn,
+ PCI_BASE_ADDRESS_0, &io_base)
+ || pcibios_read_config_byte(bus, device_fn,
+ PCI_CLASS_REVISION, &revision)
+ || pcibios_read_config_byte(bus, device_fn,
+ PCI_INTERRUPT_LINE, &irq))
+ {
+ printk("qlogicisp : error reading PCI configuration\n");
+ return 1;
+ }
+
+ if (vendor_id != PCI_VENDOR_ID_QLOGIC) {
+ printk("qlogicisp : 0x%04x is not QLogic vendor ID\n",
+ vendor_id);
+ return 1;
+ }
+
+ if (device_id != PCI_DEVICE_ID_QLOGIC_ISP1020) {
+ printk("qlogicisp : 0x%04x does not match ISP1020 device id\n",
+ device_id);
+ return 1;
+ }
+
+ if (command & PCI_COMMAND_IO && (io_base & 3) == 1)
+ io_base &= PCI_BASE_ADDRESS_IO_MASK;
+ else {
+ printk("qlogicisp : i/o mapping is disabled\n");
+ return 1;
+ }
+
+ if (!(command & PCI_COMMAND_MASTER)) {
+ printk("qlogicisp : bus mastering is disabled\n");
+ return 1;
+ }
+
+ if (revision != ISP1020_REV_ID)
+ printk("qlogicisp : new isp1020 revision ID (%d)\n", revision);
+
+ if (inw(io_base + PCI_ID_LOW) != PCI_VENDOR_ID_QLOGIC
+ || inw(io_base + PCI_ID_HIGH) != PCI_DEVICE_ID_QLOGIC_ISP1020)
+ {
+ printk("qlogicisp : can't decode i/o address space at 0x%x\n",
+ io_base);
+ return 1;
+ }
+
+ hostdata->revision = revision;
+
+ sh->irq = irq;
+ sh->io_port = io_base;
+
+ LEAVE("isp1020_init");
+
+ return 0;
+}
+
+
+#if USE_NVRAM_DEFAULTS
+
+static int isp1020_get_defaults(struct Scsi_Host *host)
+{
+ int i;
+ u_short value;
+ struct isp1020_hostdata *hostdata =
+ (struct isp1020_hostdata *) host->hostdata;
+
+ ENTER("isp1020_get_defaults");
+
+ if (!isp1020_verify_nvram(host)) {
+ printk("qlogicisp : nvram checksum failure\n");
+ printk("qlogicisp : attempting to use default parameters\n");
+ return isp1020_set_defaults(host);
+ }
+
+ value = isp1020_read_nvram_word(host, 2);
+ hostdata->host_param.fifo_threshold = (value >> 8) & 0x03;
+ hostdata->host_param.host_adapter_enable = (value >> 11) & 0x01;
+ hostdata->host_param.initiator_scsi_id = (value >> 12) & 0x0f;
+
+ value = isp1020_read_nvram_word(host, 3);
+ hostdata->host_param.bus_reset_delay = value & 0xff;
+ hostdata->host_param.retry_count = value >> 8;
+
+ value = isp1020_read_nvram_word(host, 4);
+ hostdata->host_param.retry_delay = value & 0xff;
+ hostdata->host_param.async_data_setup_time = (value >> 8) & 0x0f;
+ hostdata->host_param.req_ack_active_negation = (value >> 12) & 0x01;
+ hostdata->host_param.data_line_active_negation = (value >> 13) & 0x01;
+ hostdata->host_param.data_dma_burst_enable = (value >> 14) & 0x01;
+ hostdata->host_param.command_dma_burst_enable = (value >> 15);
+
+ value = isp1020_read_nvram_word(host, 5);
+ hostdata->host_param.tag_aging = value & 0xff;
+
+ value = isp1020_read_nvram_word(host, 6);
+ hostdata->host_param.selection_timeout = value & 0xffff;
+
+ value = isp1020_read_nvram_word(host, 7);
+ hostdata->host_param.max_queue_depth = value & 0xffff;
+
+#if DEBUG_ISP1020_SETUP
+ printk("qlogicisp : fifo threshold=%d\n",
+ hostdata->host_param.fifo_threshold);
+ printk("qlogicisp : initiator scsi id=%d\n",
+ hostdata->host_param.initiator_scsi_id);
+ printk("qlogicisp : bus reset delay=%d\n",
+ hostdata->host_param.bus_reset_delay);
+ printk("qlogicisp : retry count=%d\n",
+ hostdata->host_param.retry_count);
+ printk("qlogicisp : retry delay=%d\n",
+ hostdata->host_param.retry_delay);
+ printk("qlogicisp : async data setup time=%d\n",
+ hostdata->host_param.async_data_setup_time);
+ printk("qlogicisp : req/ack active negation=%d\n",
+ hostdata->host_param.req_ack_active_negation);
+ printk("qlogicisp : data line active negation=%d\n",
+ hostdata->host_param.data_line_active_negation);
+ printk("qlogicisp : data DMA burst enable=%d\n",
+ hostdata->host_param.data_dma_burst_enable);
+ printk("qlogicisp : command DMA burst enable=%d\n",
+ hostdata->host_param.command_dma_burst_enable);
+ printk("qlogicisp : tag age limit=%d\n",
+ hostdata->host_param.tag_aging);
+ printk("qlogicisp : selection timeout limit=%d\n",
+ hostdata->host_param.selection_timeout);
+ printk("qlogicisp : max queue depth=%d\n",
+ hostdata->host_param.max_queue_depth);
+#endif /* DEBUG_ISP1020_SETUP */
+
+ for (i = 0; i < MAX_TARGETS; i++) {
+
+ value = isp1020_read_nvram_word(host, 14 + i * 3);
+ hostdata->dev_param[i].device_flags = value & 0xff;
+ hostdata->dev_param[i].execution_throttle = value >> 8;
+
+ value = isp1020_read_nvram_word(host, 15 + i * 3);
+ hostdata->dev_param[i].synchronous_period = value & 0xff;
+ hostdata->dev_param[i].synchronous_offset = (value >> 8) & 0x0f;
+ hostdata->dev_param[i].device_enable = (value >> 12) & 0x01;
+
+#if DEBUG_ISP1020_SETUP
+ printk("qlogicisp : target 0x%02x\n", i);
+ printk("qlogicisp : device flags=0x%02x\n",
+ hostdata->dev_param[i].device_flags);
+ printk("qlogicisp : execution throttle=%d\n",
+ hostdata->dev_param[i].execution_throttle);
+ printk("qlogicisp : synchronous period=%d\n",
+ hostdata->dev_param[i].synchronous_period);
+ printk("qlogicisp : synchronous offset=%d\n",
+ hostdata->dev_param[i].synchronous_offset);
+ printk("qlogicisp : device enable=%d\n",
+ hostdata->dev_param[i].device_enable);
+#endif /* DEBUG_ISP1020_SETUP */
+ }
+
+ LEAVE("isp1020_get_defaults");
+
+ return 0;
+}
+
+
+#define ISP1020_NVRAM_LEN 0x40
+#define ISP1020_NVRAM_SIG1 0x5349
+#define ISP1020_NVRAM_SIG2 0x2050
+
+static int isp1020_verify_nvram(struct Scsi_Host *host)
+{
+ int i;
+ u_short value;
+ u_char checksum = 0;
+
+ for (i = 0; i < ISP1020_NVRAM_LEN; i++) {
+ value = isp1020_read_nvram_word(host, i);
+
+ switch (i) {
+ case 0:
+ if (value != ISP1020_NVRAM_SIG1) return 0;
+ break;
+ case 1:
+ if (value != ISP1020_NVRAM_SIG2) return 0;
+ break;
+ case 2:
+ if ((value & 0xff) != 0x02) return 0;
+ break;
+ }
+ checksum += value & 0xff;
+ checksum += value >> 8;
+ }
+
+ return (checksum == 0);
+}
+
+#define NVRAM_DELAY() udelay(2) /* 2 microsecond delay */
+
+
+u_short isp1020_read_nvram_word(struct Scsi_Host *host, u_short byte)
+{
+ int i;
+ u_short value, output, input;
+
+ byte &= 0x3f; byte |= 0x0180;
+
+ for (i = 8; i >= 0; i--) {
+ output = ((byte >> i) & 0x1) ? 0x4 : 0x0;
+ outw(output | 0x2, host->io_port + PCI_NVRAM); NVRAM_DELAY();
+ outw(output | 0x3, host->io_port + PCI_NVRAM); NVRAM_DELAY();
+ outw(output | 0x2, host->io_port + PCI_NVRAM); NVRAM_DELAY();
+ }
+
+ for (i = 0xf, value = 0; i >= 0; i--) {
+ value <<= 1;
+ outw(0x3, host->io_port + PCI_NVRAM); NVRAM_DELAY();
+ input = inw(host->io_port + PCI_NVRAM); NVRAM_DELAY();
+ outw(0x2, host->io_port + PCI_NVRAM); NVRAM_DELAY();
+ if (input & 0x8) value |= 1;
+ }
+
+ outw(0x0, host->io_port + PCI_NVRAM); NVRAM_DELAY();
+
+ return value;
+}
+
+#endif /* USE_NVRAM_DEFAULTS */
+
+
+static int isp1020_set_defaults(struct Scsi_Host *host)
+{
+ struct isp1020_hostdata *hostdata =
+ (struct isp1020_hostdata *) host->hostdata;
+ int i;
+
+ ENTER("isp1020_set_defaults");
+
+ hostdata->host_param.fifo_threshold = 2;
+ hostdata->host_param.host_adapter_enable = 1;
+ hostdata->host_param.initiator_scsi_id = 7;
+ hostdata->host_param.bus_reset_delay = 3;
+ hostdata->host_param.retry_count = 0;
+ hostdata->host_param.retry_delay = 1;
+ hostdata->host_param.async_data_setup_time = 6;
+ hostdata->host_param.req_ack_active_negation = 1;
+ hostdata->host_param.data_line_active_negation = 1;
+ hostdata->host_param.data_dma_burst_enable = 1;
+ hostdata->host_param.command_dma_burst_enable = 1;
+ hostdata->host_param.tag_aging = 8;
+ hostdata->host_param.selection_timeout = 250;
+ hostdata->host_param.max_queue_depth = 256;
+
+ for (i = 0; i < MAX_TARGETS; i++) {
+ hostdata->dev_param[i].device_flags = 0xfd;
+ hostdata->dev_param[i].execution_throttle = 16;
+ hostdata->dev_param[i].synchronous_period = 25;
+ hostdata->dev_param[i].synchronous_offset = 12;
+ hostdata->dev_param[i].device_enable = 1;
+ }
+
+ LEAVE("isp1020_set_defaults");
+
+ return 0;
+}
+
+
+static int isp1020_load_parameters(struct Scsi_Host *host)
+{
+ int i, k;
+ u_int queue_addr;
+ u_short param[6];
+ u_short isp_cfg1;
+ unsigned long flags;
+ struct isp1020_hostdata *hostdata =
+ (struct isp1020_hostdata *) host->hostdata;
+
+ ENTER("isp1020_load_parameters");
+
+ save_flags(flags);
+ cli();
+
+ outw(hostdata->host_param.fifo_threshold, host->io_port + ISP_CFG1);
+
+ param[0] = MBOX_SET_INIT_SCSI_ID;
+ param[1] = hostdata->host_param.initiator_scsi_id;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set initiator id failure\n");
+ return 1;
+ }
+
+ param[0] = MBOX_SET_RETRY_COUNT;
+ param[1] = hostdata->host_param.retry_count;
+ param[2] = hostdata->host_param.retry_delay;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set retry count failure\n");
+ return 1;
+ }
+
+ param[0] = MBOX_SET_ASYNC_DATA_SETUP_TIME;
+ param[1] = hostdata->host_param.async_data_setup_time;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : async data setup time failure\n");
+ return 1;
+ }
+
+ param[0] = MBOX_SET_ACTIVE_NEG_STATE;
+ param[1] = (hostdata->host_param.req_ack_active_negation << 4)
+ | (hostdata->host_param.data_line_active_negation << 5);
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set active negation state failure\n");
+ return 1;
+ }
+
+ param[0] = MBOX_SET_PCI_CONTROL_PARAMS;
+ param[1] = hostdata->host_param.data_dma_burst_enable << 1;
+ param[2] = hostdata->host_param.command_dma_burst_enable << 1;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set pci control parameter failure\n");
+ return 1;
+ }
+
+ isp_cfg1 = inw(host->io_port + ISP_CFG1);
+
+ if (hostdata->host_param.data_dma_burst_enable
+ || hostdata->host_param.command_dma_burst_enable)
+ isp_cfg1 |= 0x0004;
+ else
+ isp_cfg1 &= 0xfffb;
+
+ outw(isp_cfg1, host->io_port + ISP_CFG1);
+
+ param[0] = MBOX_SET_TAG_AGE_LIMIT;
+ param[1] = hostdata->host_param.tag_aging;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set tag age limit failure\n");
+ return 1;
+ }
+
+ param[0] = MBOX_SET_SELECT_TIMEOUT;
+ param[1] = hostdata->host_param.selection_timeout;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set selection timeout failure\n");
+ return 1;
+ }
+
+ for (i = 0; i < MAX_TARGETS; i++) {
+
+ if (!hostdata->dev_param[i].device_enable)
+ continue;
+
+ param[0] = MBOX_SET_TARGET_PARAMS;
+ param[1] = i << 8;
+ param[2] = hostdata->dev_param[i].device_flags << 8;
+ param[3] = (hostdata->dev_param[i].synchronous_offset << 8)
+ | hostdata->dev_param[i].synchronous_period;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set target parameter failure\n");
+ return 1;
+ }
+
+ for (k = 0; k < MAX_LUNS; k++) {
+
+ param[0] = MBOX_SET_DEV_QUEUE_PARAMS;
+ param[1] = (i << 8) | k;
+ param[2] = hostdata->host_param.max_queue_depth;
+ param[3] = hostdata->dev_param[i].execution_throttle;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set device queue "
+ "parameter failure\n");
+ return 1;
+ }
+ }
+ }
+
+ queue_addr = (u_int) virt_to_bus(&hostdata->res[0][0]);
+
+ param[0] = MBOX_INIT_RES_QUEUE;
+ param[1] = RES_QUEUE_LEN + 1;
+ param[2] = (u_short) (queue_addr >> 16);
+ param[3] = (u_short) (queue_addr & 0xffff);
+ param[4] = 0;
+ param[5] = 0;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set response queue failure\n");
+ return 1;
+ }
+
+ queue_addr = (u_int) virt_to_bus(&hostdata->req[0][0]);
+
+ param[0] = MBOX_INIT_REQ_QUEUE;
+ param[1] = QLOGICISP_REQ_QUEUE_LEN + 1;
+ param[2] = (u_short) (queue_addr >> 16);
+ param[3] = (u_short) (queue_addr & 0xffff);
+ param[4] = 0;
+
+ isp1020_mbox_command(host, param);
+
+ if (param[0] != MBOX_COMMAND_COMPLETE) {
+ restore_flags(flags);
+ printk("qlogicisp : set request queue failure\n");
+ return 1;
+ }
+
+ restore_flags(flags);
+
+ LEAVE("isp1020_load_parameters");
+
+ return 0;
+}
+
+
+/*
+ * currently, this is only called during initialization or abort/reset,
+ * at which times interrupts are disabled, so polling is OK, I guess...
+ */
+static int isp1020_mbox_command(struct Scsi_Host *host, u_short param[])
+{
+ int loop_count;
+
+ if (mbox_param[param[0]] == 0)
+ return 1;
+
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && inw(host->io_port + HOST_HCCR) & 0x0080)
+ barrier();
+ if (!loop_count)
+ printk("qlogicisp: mbox_command loop timeout #1\n");
+
+ switch(mbox_param[param[0]] >> 4) {
+ case 6: outw(param[5], host->io_port + MBOX5);
+ case 5: outw(param[4], host->io_port + MBOX4);
+ case 4: outw(param[3], host->io_port + MBOX3);
+ case 3: outw(param[2], host->io_port + MBOX2);
+ case 2: outw(param[1], host->io_port + MBOX1);
+ case 1: outw(param[0], host->io_port + MBOX0);
+ }
+
+ outw(0x0, host->io_port + PCI_SEMAPHORE);
+ outw(HCCR_CLEAR_RISC_INTR, host->io_port + HOST_HCCR);
+ outw(HCCR_SET_HOST_INTR, host->io_port + HOST_HCCR);
+
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && !(inw(host->io_port + PCI_INTF_STS) & 0x04))
+ barrier();
+ if (!loop_count)
+ printk("qlogicisp: mbox_command loop timeout #2\n");
+
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && inw(host->io_port + MBOX0) == 0x04)
+ barrier();
+ if (!loop_count)
+ printk("qlogicisp: mbox_command loop timeout #3\n");
+
+ switch(mbox_param[param[0]] & 0xf) {
+ case 6: param[5] = inw(host->io_port + MBOX5);
+ case 5: param[4] = inw(host->io_port + MBOX4);
+ case 4: param[3] = inw(host->io_port + MBOX3);
+ case 3: param[2] = inw(host->io_port + MBOX2);
+ case 2: param[1] = inw(host->io_port + MBOX1);
+ case 1: param[0] = inw(host->io_port + MBOX0);
+ }
+
+ outw(0x0, host->io_port + PCI_SEMAPHORE);
+ outw(HCCR_CLEAR_RISC_INTR, host->io_port + HOST_HCCR);
+
+ return 0;
+}
+
+
+#if DEBUG_ISP1020_INTR
+
+void isp1020_print_status_entry(struct Status_Entry *status)
+{
+ int i;
+
+ printk("qlogicisp : entry count = 0x%02x, type = 0x%02x, flags = 0x%02x\n",
+ status->hdr.entry_cnt, status->hdr.entry_type, status->hdr.flags);
+ printk("qlogicisp : scsi status = 0x%04x, completion status = 0x%04x\n",
+ status->scsi_status, status->completion_status);
+ printk("qlogicisp : state flags = 0x%04x, status flags = 0x%04x\n",
+ status->state_flags, status->status_flags);
+ printk("qlogicisp : time = 0x%04x, request sense length = 0x%04x\n",
+ status->time, status->req_sense_len);
+ printk("qlogicisp : residual transfer length = 0x%08x\n", status->residual);
+
+ for (i = 0; i < status->req_sense_len; i++)
+ printk("qlogicisp : sense data = 0x%02x\n", status->req_sense_data[i]);
+}
+
+#endif /* DEBUG_ISP1020_INTR */
+
+
+#if DEBUG_ISP1020
+
+void isp1020_print_scsi_cmd(Scsi_Cmnd *cmd)
+{
+ int i;
+
+ printk("qlogicisp : target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n",
+ cmd->target, cmd->lun, cmd->cmd_len);
+ printk("qlogicisp : command = ");
+ for (i = 0; i < cmd->cmd_len; i++)
+ printk("0x%02x ", cmd->cmnd[i]);
+ printk("\n");
+}
+
+#endif /* DEBUG_ISP1020 */
+
+
+#ifdef MODULE
+Scsi_Host_Template driver_template = QLOGICISP;
+
+#include "scsi_module.c"
+#endif /* MODULE */