diff options
Diffstat (limited to 'linux/src/drivers/net/via-rhine.c')
-rw-r--r-- | linux/src/drivers/net/via-rhine.c | 1317 |
1 files changed, 1317 insertions, 0 deletions
diff --git a/linux/src/drivers/net/via-rhine.c b/linux/src/drivers/net/via-rhine.c new file mode 100644 index 0000000..5dc9fe2 --- /dev/null +++ b/linux/src/drivers/net/via-rhine.c @@ -0,0 +1,1317 @@ +/* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */ +/* + Written 1998 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU Public License (GPL), incorporated herein by reference. + Drivers derived from this code also fall under the GPL and must retain + this authorship and copyright notice. + + This driver is designed for the VIA VT86c100A Rhine-II PCI Fast Ethernet + controller. It also works with the older 3043 Rhine-I chip. + + The author may be reached as becker@cesdis.edu, or + Donald Becker + 312 Severn Ave. #W302 + Annapolis MD 21403 + + Support and updates available at + http://cesdis.gsfc.nasa.gov/linux/drivers/via-rhine.html +*/ + +static const char *versionA = +"via-rhine.c:v1.00 9/5/98 Written by Donald Becker\n"; +static const char *versionB = +" http://cesdis.gsfc.nasa.gov/linux/drivers/via-rhine.html\n"; + +/* A few user-configurable values. These may be modified when a driver + module is loaded.*/ + +static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ +static int max_interrupt_work = 20; +static int min_pci_latency = 64; + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1518 effectively disables this feature. */ +static int rx_copybreak = 0; + +/* Used to pass the media type, etc. + Both 'options[]' and 'full_duplex[]' should exist for driver + interoperability. + The media type is usually passed in 'options[]'. +*/ +#define MAX_UNITS 8 /* More are supported, limit only on options */ +static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; +static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; + +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + The Rhine has a 64 element 8390-like hash table. */ +static const int multicast_filter_limit = 32; + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + The compiler will convert <unsigned>'%'<2^N> into a bit mask. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + There are no ill effects from too-large receive rings. */ +#define TX_RING_SIZE 8 +#define RX_RING_SIZE 16 + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2*HZ) + +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ + +/* Include files, designed to support most kernel versions 2.0.0 and later. */ +#include <linux/config.h> +#include <linux/version.h> +#ifdef MODULE +#ifdef MODVERSIONS +#include <linux/modversions.h> +#endif +#include <linux/module.h> +#else +#define MOD_INC_USE_COUNT +#define MOD_DEC_USE_COUNT +#endif + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/malloc.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <asm/processor.h> /* Processor type for cache alignment. */ +#include <asm/bitops.h> +#include <asm/io.h> + +/* This driver was written to use PCI memory space, however some boards + only work with I/O space accesses. */ +#define VIA_USE_IO +#ifdef VIA_USE_IO +#undef readb +#undef readw +#undef readl +#undef writeb +#undef writew +#undef writel +#define readb inb +#define readw inw +#define readl inl +#define writeb outb +#define writew outw +#define writel outl +#endif + +/* Kernel compatibility defines, some common to David Hind's PCMCIA package. + This is only in the support-all-kernels source code. */ + +#define RUN_AT(x) (jiffies + (x)) + +#if (LINUX_VERSION_CODE >= 0x20100) +char kernel_version[] = UTS_RELEASE; +#else +#ifndef __alpha__ +#define ioremap vremap +#define iounmap vfree +#endif +#endif +#if defined(MODULE) && LINUX_VERSION_CODE > 0x20115 +MODULE_AUTHOR("Donald Becker <becker@cesdis.gsfc.nasa.gov>"); +MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver"); +MODULE_PARM(max_interrupt_work, "i"); +MODULE_PARM(min_pci_latency, "i"); +MODULE_PARM(debug, "i"); +MODULE_PARM(rx_copybreak, "i"); +MODULE_PARM(options, "1-" __MODULE_STRING(MAX_UNITS) "i"); +MODULE_PARM(full_duplex, "1-" __MODULE_STRING(MAX_UNITS) "i"); +#endif +#if LINUX_VERSION_CODE < 0x20123 +#define test_and_set_bit(val, addr) set_bit(val, addr) +#endif +#if LINUX_VERSION_CODE <= 0x20139 +#define net_device_stats enet_statistics +#else +#define NETSTATS_VER2 +#endif +#if LINUX_VERSION_CODE < 0x20155 || defined(CARDBUS) +/* Grrrr, the PCI code changed, but did not consider CardBus... */ +#include <linux/bios32.h> +#define PCI_SUPPORT_VER1 +#else +#define PCI_SUPPORT_VER2 +#endif +#if LINUX_VERSION_CODE < 0x20159 +#define dev_free_skb(skb) dev_kfree_skb(skb, FREE_WRITE); +#else +#define dev_free_skb(skb) dev_kfree_skb(skb); +#endif + + +/* + Theory of Operation + +I. Board Compatibility + +This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet +controller. + +II. Board-specific settings + +Boards with this chip are functional only in a bus-master PCI slot. + +Many operational settings are loaded from the EEPROM to the Config word at +offset 0x78. This driver assumes that they are correct. +If this driver is compiled to use PCI memory space operations the EEPROM +must be configured to enable memory ops. + +III. Driver operation + +IIIa. Ring buffers + +This driver uses two statically allocated fixed-size descriptor lists +formed into rings by a branch from the final descriptor to the beginning of +the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. + +IIIb/c. Transmit/Receive Structure + +This driver attempts to use a zero-copy receive and transmit scheme. + +Alas, all data buffers are required to start on a 32 bit boundary, so +the driver must often copy transmit packets into bounce buffers. + +The driver allocates full frame size skbuffs for the Rx ring buffers at +open() time and passes the skb->data field to the chip as receive data +buffers. When an incoming frame is less than RX_COPYBREAK bytes long, +a fresh skbuff is allocated and the frame is copied to the new skbuff. +When the incoming frame is larger, the skbuff is passed directly up the +protocol stack. Buffers consumed this way are replaced by newly allocated +skbuffs in the last phase of netdev_rx(). + +The RX_COPYBREAK value is chosen to trade-off the memory wasted by +using a full-sized skbuff for small frames vs. the copying costs of larger +frames. New boards are typically used in generously configured machines +and the underfilled buffers have negligible impact compared to the benefit of +a single allocation size, so the default value of zero results in never +copying packets. When copying is done, the cost is usually mitigated by using +a combined copy/checksum routine. Copying also preloads the cache, which is +most useful with small frames. + +Since the VIA chips are only able to transfer data to buffers on 32 bit +boundaries, the the IP header at offset 14 in an ethernet frame isn't +longword aligned for further processing. Copying these unaligned buffers +has the beneficial effect of 16-byte aligning the IP header. + +IIId. Synchronization + +The driver runs as two independent, single-threaded flows of control. One +is the send-packet routine, which enforces single-threaded use by the +dev->tbusy flag. The other thread is the interrupt handler, which is single +threaded by the hardware and interrupt handling software. + +The send packet thread has partial control over the Tx ring and 'dev->tbusy' +flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next +queue slot is empty, it clears the tbusy flag when finished otherwise it sets +the 'lp->tx_full' flag. + +The interrupt handler has exclusive control over the Rx ring and records stats +from the Tx ring. After reaping the stats, it marks the Tx queue entry as +empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it +clears both the tx_full and tbusy flags. + +IV. Notes + +IVb. References + +Preliminary VT86C100A manual from http://www.via.com.tw/ +http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html +http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html + +IVc. Errata + +The VT86C100A manual is not reliable information. +The chip does not handle unaligned transmit or receive buffers, resulting +in significant performance degradation for bounce buffer copies on transmit +and unaligned IP headers on receive. +The chip does not pad to minimum transmit length. + +*/ + + + +/* This table drives the PCI probe routines. It's mostly boilerplate in all + of the drivers, and will likely be provided by some future kernel. + Note the matching code -- the first table entry matchs all 56** cards but + second only the 1234 card. +*/ +enum pci_flags_bit { + PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, + PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3, +}; +struct pci_id_info { + const char *name; + u16 vendor_id, device_id, device_id_mask, flags; + int io_size; + struct device *(*probe1)(int pci_bus, int pci_devfn, struct device *dev, + long ioaddr, int irq, int chip_idx, int fnd_cnt); +}; + +static struct device *via_probe1(int pci_bus, int pci_devfn, + struct device *dev, long ioaddr, int irq, + int chp_idx, int fnd_cnt); + +static struct pci_id_info pci_tbl[] = { + { "VIA VT86C100A Rhine-II", 0x1106, 0x6100, 0xffff, + PCI_USES_MEM|PCI_USES_IO|PCI_USES_MEM|PCI_USES_MASTER, 128, via_probe1}, + { "VIA VT3043 Rhine", 0x1106, 0x3043, 0xffff, + PCI_USES_IO|PCI_USES_MEM|PCI_USES_MASTER, 128, via_probe1}, + {0,}, /* 0 terminated list. */ +}; + + +/* A chip capabilities table, matching the entries in pci_tbl[] above. */ +enum chip_capability_flags {CanHaveMII=1, }; +struct chip_info { + int io_size; + int flags; +} static cap_tbl[] = { + {128, CanHaveMII, }, + {128, CanHaveMII, }, +}; + + +/* Offsets to the device registers. +*/ +enum register_offsets { + StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08, + IntrStatus=0x0C, IntrEnable=0x0E, + MulticastFilter0=0x10, MulticastFilter1=0x14, + RxRingPtr=0x18, TxRingPtr=0x1C, + MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIConfig=0x6E, + MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, + Config=0x78, RxMissed=0x7C, RxCRCErrs=0x7E, +}; + +/* Bits in the interrupt status/mask registers. */ +enum intr_status_bits { + IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020, + IntrTxDone=0x0002, IntrTxAbort=0x0008, IntrTxUnderrun=0x0010, + IntrPCIErr=0x0040, + IntrStatsMax=0x0080, IntrRxEarly=0x0100, IntrMIIChange=0x0200, + IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000, + IntrTxAborted=0x2000, IntrLinkChange=0x4000, + IntrRxWakeUp=0x8000, + IntrNormalSummary=0x0003, IntrAbnormalSummary=0x8260, +}; + + +/* The Rx and Tx buffer descriptors. */ +struct rx_desc { + u16 rx_status; + u16 rx_length; + u32 desc_length; + u32 addr; + u32 next_desc; +}; +struct tx_desc { + u16 tx_status; + u16 tx_own; + u32 desc_length; + u32 addr; + u32 next_desc; +}; + +/* Bits in *_desc.status */ +enum rx_status_bits { + RxDescOwn=0x80000000, RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F}; +enum desc_status_bits { + DescOwn=0x8000, DescEndPacket=0x4000, DescIntr=0x1000, +}; + +/* Bits in ChipCmd. */ +enum chip_cmd_bits { + CmdInit=0x0001, CmdStart=0x0002, CmdStop=0x0004, CmdRxOn=0x0008, + CmdTxOn=0x0010, CmdTxDemand=0x0020, CmdRxDemand=0x0040, + CmdEarlyRx=0x0100, CmdEarlyTx=0x0200, CmdFDuplex=0x0400, + CmdNoTxPoll=0x0800, CmdReset=0x8000, +}; + +struct netdev_private { + /* Descriptor rings first for alignment. */ + struct rx_desc rx_ring[RX_RING_SIZE]; + struct tx_desc tx_ring[TX_RING_SIZE]; + /* The addresses of receive-in-place skbuffs. */ + struct sk_buff* rx_skbuff[RX_RING_SIZE]; + /* The saved address of a sent-in-place packet/buffer, for later free(). */ + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + unsigned char *tx_buf[TX_RING_SIZE]; /* Tx bounce buffers */ + unsigned char *tx_bufs; /* Tx bounce buffer region. */ + struct device *next_module; /* Link for devices of this type. */ + struct net_device_stats stats; + struct timer_list timer; /* Media monitoring timer. */ + unsigned char pci_bus, pci_devfn; + /* Frequently used values: keep some adjacent for cache effect. */ + int chip_id; + long in_interrupt; /* Word-long for SMP locks. */ + struct rx_desc *rx_head_desc; + unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ + unsigned int cur_tx, dirty_tx; + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + u16 chip_cmd; /* Current setting for ChipCmd */ + unsigned int tx_full:1; /* The Tx queue is full. */ + /* These values are keep track of the transceiver/media in use. */ + unsigned int full_duplex:1; /* Full-duplex operation requested. */ + unsigned int duplex_lock:1; + unsigned int medialock:1; /* Do not sense media. */ + unsigned int default_port:4; /* Last dev->if_port value. */ + u8 tx_thresh, rx_thresh; + /* MII transceiver section. */ + int mii_cnt; /* MII device addresses. */ + u16 advertising; /* NWay media advertisement */ + unsigned char phys[2]; /* MII device addresses. */ +}; + +static int mdio_read(struct device *dev, int phy_id, int location); +static void mdio_write(struct device *dev, int phy_id, int location, int value); +static int netdev_open(struct device *dev); +static void check_duplex(struct device *dev); +static void netdev_timer(unsigned long data); +static void tx_timeout(struct device *dev); +static void init_ring(struct device *dev); +static int start_tx(struct sk_buff *skb, struct device *dev); +static void intr_handler(int irq, void *dev_instance, struct pt_regs *regs); +static int netdev_rx(struct device *dev); +static void netdev_error(struct device *dev, int intr_status); +static void set_rx_mode(struct device *dev); +static struct net_device_stats *get_stats(struct device *dev); +static int mii_ioctl(struct device *dev, struct ifreq *rq, int cmd); +static int netdev_close(struct device *dev); + + + +/* A list of our installed devices, for removing the driver module. */ +static struct device *root_net_dev = NULL; + +/* Ideally we would detect all network cards in slot order. That would + be best done a central PCI probe dispatch, which wouldn't work + well when dynamically adding drivers. So instead we detect just the + cards we know about in slot order. */ + +static int pci_etherdev_probe(struct device *dev, struct pci_id_info pci_tbl[]) +{ + int cards_found = 0; + int pci_index = 0; + unsigned char pci_bus, pci_device_fn; + + if ( ! pcibios_present()) + return -ENODEV; + + for (;pci_index < 0xff; pci_index++) { + u16 vendor, device, pci_command, new_command; + int chip_idx, irq; + long pciaddr; + long ioaddr; + + if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8, pci_index, + &pci_bus, &pci_device_fn) + != PCIBIOS_SUCCESSFUL) + break; + pcibios_read_config_word(pci_bus, pci_device_fn, + PCI_VENDOR_ID, &vendor); + pcibios_read_config_word(pci_bus, pci_device_fn, + PCI_DEVICE_ID, &device); + + for (chip_idx = 0; pci_tbl[chip_idx].vendor_id; chip_idx++) + if (vendor == pci_tbl[chip_idx].vendor_id + && (device & pci_tbl[chip_idx].device_id_mask) == + pci_tbl[chip_idx].device_id) + break; + if (pci_tbl[chip_idx].vendor_id == 0) /* Compiled out! */ + continue; + + { +#if defined(PCI_SUPPORT_VER2) + struct pci_dev *pdev = pci_find_slot(pci_bus, pci_device_fn); +#ifdef VIA_USE_IO + pciaddr = pdev->base_address[0]; +#else + pciaddr = pdev->base_address[1]; +#endif + irq = pdev->irq; +#else + u32 pci_memaddr; + u8 pci_irq_line; + pcibios_read_config_byte(pci_bus, pci_device_fn, + PCI_INTERRUPT_LINE, &pci_irq_line); +#ifdef VIA_USE_IO + pcibios_read_config_dword(pci_bus, pci_device_fn, + PCI_BASE_ADDRESS_0, &pci_memaddr); + pciaddr = pci_memaddr; +#else + pcibios_read_config_dword(pci_bus, pci_device_fn, + PCI_BASE_ADDRESS_1, &pci_memaddr); + pciaddr = pci_memaddr; +#endif + irq = pci_irq_line; +#endif + } + + if (debug > 2) + printk(KERN_INFO "Found %s at PCI address %#lx, IRQ %d.\n", + pci_tbl[chip_idx].name, pciaddr, irq); + + if (pci_tbl[chip_idx].flags & PCI_USES_IO) { + if (check_region(pciaddr, pci_tbl[chip_idx].io_size)) + continue; + ioaddr = pciaddr & ~3; + } else if ((ioaddr = (long)ioremap(pciaddr & ~0xf, + pci_tbl[chip_idx].io_size)) == 0) { + printk(KERN_INFO "Failed to map PCI address %#lx.\n", + pciaddr); + continue; + } + + pcibios_read_config_word(pci_bus, pci_device_fn, + PCI_COMMAND, &pci_command); + new_command = pci_command | (pci_tbl[chip_idx].flags & 7); + if (pci_command != new_command) { + printk(KERN_INFO " The PCI BIOS has not enabled the" + " device at %d/%d! Updating PCI command %4.4x->%4.4x.\n", + pci_bus, pci_device_fn, pci_command, new_command); + pcibios_write_config_word(pci_bus, pci_device_fn, + PCI_COMMAND, new_command); + } + + dev = pci_tbl[chip_idx].probe1(pci_bus, pci_device_fn, dev, ioaddr, + irq, chip_idx, cards_found); + + if (dev && (pci_tbl[chip_idx].flags & PCI_COMMAND_MASTER)) { + u8 pci_latency; + pcibios_read_config_byte(pci_bus, pci_device_fn, + PCI_LATENCY_TIMER, &pci_latency); + if (pci_latency < min_pci_latency) { + printk(KERN_INFO " PCI latency timer (CFLT) is " + "unreasonably low at %d. Setting to %d clocks.\n", + pci_latency, min_pci_latency); + pcibios_write_config_byte(pci_bus, pci_device_fn, + PCI_LATENCY_TIMER, min_pci_latency); + } + } + dev = 0; + cards_found++; + } + + return cards_found ? 0 : -ENODEV; +} + +#ifndef MODULE +int via_rhine_probe(struct device *dev) +{ + return pci_etherdev_probe(dev, pci_tbl); +} +#endif + +static struct device *via_probe1(int pci_bus, int pci_devfn, + struct device *dev, long ioaddr, int irq, + int chip_id, int card_idx) +{ + static int did_version = 0; /* Already printed version info */ + struct netdev_private *np; + int i, option = card_idx < MAX_UNITS ? options[card_idx] : 0; + + if (debug > 0 && did_version++ == 0) + printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB); + + dev = init_etherdev(dev, 0); + + printk(KERN_INFO "%s: %s at 0x%lx, ", + dev->name, pci_tbl[chip_id].name, ioaddr); + + /* Ideally we would be read the EEPROM but access may be locked. */ + for (i = 0; i <6; i++) + dev->dev_addr[i] = readb(ioaddr + StationAddr + i); + for (i = 0; i < 5; i++) + printk("%2.2x:", dev->dev_addr[i]); + printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq); + +#ifdef VIA_USE_IO + request_region(ioaddr, pci_tbl[chip_id].io_size, dev->name); +#endif + + /* Reset the chip to erase previous misconfiguration. */ + writew(CmdReset, ioaddr + ChipCmd); + + dev->base_addr = ioaddr; + dev->irq = irq; + + /* Make certain the descriptor lists are cache-aligned. */ + np = (void *)(((long)kmalloc(sizeof(*np), GFP_KERNEL) + 31) & ~31); + memset(np, 0, sizeof(*np)); + dev->priv = np; + + np->next_module = root_net_dev; + root_net_dev = dev; + + np->pci_bus = pci_bus; + np->pci_devfn = pci_devfn; + np->chip_id = chip_id; + + if (dev->mem_start) + option = dev->mem_start; + + /* The lower four bits are the media type. */ + if (option > 0) { + if (option & 0x200) + np->full_duplex = 1; + np->default_port = option & 15; + if (np->default_port) + np->medialock = 1; + } + if (card_idx < MAX_UNITS && full_duplex[card_idx] > 0) + np->full_duplex = 1; + + if (np->full_duplex) + np->duplex_lock = 1; + + /* The chip-specific entries in the device structure. */ + dev->open = &netdev_open; + dev->hard_start_xmit = &start_tx; + dev->stop = &netdev_close; + dev->get_stats = &get_stats; + dev->set_multicast_list = &set_rx_mode; + dev->do_ioctl = &mii_ioctl; + + if (cap_tbl[np->chip_id].flags & CanHaveMII) { + int phy, phy_idx = 0; + np->phys[0] = 1; /* Standard for this chip. */ + for (phy = 1; phy < 32 && phy_idx < 4; phy++) { + int mii_status = mdio_read(dev, phy, 1); + if (mii_status != 0xffff && mii_status != 0x0000) { + np->phys[phy_idx++] = phy; + np->advertising = mdio_read(dev, phy, 4); + printk(KERN_INFO "%s: MII PHY found at address %d, status " + "0x%4.4x advertising %4.4x Link %4.4x.\n", + dev->name, phy, mii_status, np->advertising, + mdio_read(dev, phy, 5)); + } + } + np->mii_cnt = phy_idx; + } + + return dev; +} + + +/* Read and write over the MII Management Data I/O (MDIO) interface. */ + +static int mdio_read(struct device *dev, int phy_id, int regnum) +{ + long ioaddr = dev->base_addr; + int boguscnt = 1024; + + /* Wait for a previous command to complete. */ + while ((readb(ioaddr + MIICmd) & 0x60) && --boguscnt > 0) + ; + writeb(0x00, ioaddr + MIICmd); + writeb(phy_id, ioaddr + MIIPhyAddr); + writeb(regnum, ioaddr + MIIRegAddr); + writeb(0x40, ioaddr + MIICmd); /* Trigger read */ + boguscnt = 1024; + while ((readb(ioaddr + MIICmd) & 0x40) && --boguscnt > 0) + ; + return readw(ioaddr + MIIData); +} + +static void mdio_write(struct device *dev, int phy_id, int regnum, int value) +{ + long ioaddr = dev->base_addr; + int boguscnt = 1024; + + /* Wait for a previous command to complete. */ + while ((readb(ioaddr + MIICmd) & 0x60) && --boguscnt > 0) + ; + writeb(0x00, ioaddr + MIICmd); + writeb(phy_id, ioaddr + MIIPhyAddr); + writeb(regnum, ioaddr + MIIRegAddr); + writew(value, ioaddr + MIIData); + writeb(0x20, ioaddr + MIICmd); /* Trigger write. */ + return; +} + + +static int netdev_open(struct device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + int i; + + /* Reset the chip. */ + writew(CmdReset, ioaddr + ChipCmd); + + if (request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev)) + return -EAGAIN; + + if (debug > 1) + printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", + dev->name, dev->irq); + + MOD_INC_USE_COUNT; + + init_ring(dev); + + writel(virt_to_bus(np->rx_ring), ioaddr + RxRingPtr); + writel(virt_to_bus(np->tx_ring), ioaddr + TxRingPtr); + + for (i = 0; i < 6; i++) + writeb(dev->dev_addr[i], ioaddr + StationAddr + i); + + /* Initialize other registers. */ + writew(0x0006, ioaddr + PCIConfig); /* Tune configuration??? */ + /* Configure the FIFO thresholds. */ + writeb(0x20, ioaddr + TxConfig); /* Initial threshold 32 bytes */ + np->tx_thresh = 0x20; + np->rx_thresh = 0x60; /* Written in set_rx_mode(). */ + + if (dev->if_port == 0) + dev->if_port = np->default_port; + + dev->tbusy = 0; + dev->interrupt = 0; + np->in_interrupt = 0; + + set_rx_mode(dev); + + dev->start = 1; + + /* Enable interrupts by setting the interrupt mask. */ + writew(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow| IntrRxDropped| + IntrTxDone | IntrTxAbort | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange | IntrMIIChange, + ioaddr + IntrEnable); + + np->chip_cmd = CmdStart|CmdTxOn|CmdRxOn|CmdNoTxPoll; + writew(np->chip_cmd, ioaddr + ChipCmd); + + check_duplex(dev); + + if (debug > 2) + printk(KERN_DEBUG "%s: Done netdev_open(), status %4.4x " + "MII status: %4.4x.\n", + dev->name, readw(ioaddr + ChipCmd), + mdio_read(dev, np->phys[0], 1)); + + /* Set the timer to check for link beat. */ + init_timer(&np->timer); + np->timer.expires = RUN_AT(1); + np->timer.data = (unsigned long)dev; + np->timer.function = &netdev_timer; /* timer handler */ + add_timer(&np->timer); + + return 0; +} + +static void check_duplex(struct device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + int mii_reg5 = mdio_read(dev, np->phys[0], 5); + int duplex; + + if (np->duplex_lock || mii_reg5 == 0xffff) + return; + duplex = (mii_reg5 & 0x0100) || (mii_reg5 & 0x01C0) == 0x0040; + if (np->full_duplex != duplex) { + np->full_duplex = duplex; + if (debug) + printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link" + " partner capability of %4.4x.\n", dev->name, + duplex ? "full" : "half", np->phys[0], mii_reg5); + if (duplex) + np->chip_cmd |= CmdFDuplex; + else + np->chip_cmd &= ~CmdFDuplex; + writew(np->chip_cmd, ioaddr + ChipCmd); + } +} + +static void netdev_timer(unsigned long data) +{ + struct device *dev = (struct device *)data; + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + int next_tick = 10*HZ; + + if (debug > 3) { + printk(KERN_DEBUG "%s: VIA Rhine monitor tick, status %4.4x.\n", + dev->name, readw(ioaddr + IntrStatus)); + } + check_duplex(dev); + + np->timer.expires = RUN_AT(next_tick); + add_timer(&np->timer); +} + +static void tx_timeout(struct device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + + printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status " + "%4.4x, resetting...\n", + dev->name, readw(ioaddr + IntrStatus), + mdio_read(dev, np->phys[0], 1)); + + /* Perhaps we should reinitialize the hardware here. */ + dev->if_port = 0; + /* Stop and restart the chip's Tx processes . */ + + /* Trigger an immediate transmit demand. */ + + dev->trans_start = jiffies; + np->stats.tx_errors++; + return; +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void init_ring(struct device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + int i; + + np->tx_full = 0; + np->cur_rx = np->cur_tx = 0; + np->dirty_rx = np->dirty_tx = 0; + + np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); + np->rx_head_desc = &np->rx_ring[0]; + + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].rx_status = 0; + np->rx_ring[i].rx_length = 0; + np->rx_ring[i].desc_length = np->rx_buf_sz; + np->rx_ring[i].next_desc = virt_to_bus(&np->rx_ring[i+1]); + np->rx_skbuff[i] = 0; + } + /* Mark the last entry as wrapping the ring. */ + np->rx_ring[i-1].next_desc = virt_to_bus(&np->rx_ring[0]); + + /* Fill in the Rx buffers. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[i] = skb; + if (skb == NULL) + break; + skb->dev = dev; /* Mark as being used by this device. */ + np->rx_ring[i].addr = virt_to_bus(skb->tail); + np->rx_ring[i].rx_status = 0; + np->rx_ring[i].rx_length = DescOwn; + } + np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = 0; + np->tx_ring[i].tx_own = 0; + np->tx_ring[i].desc_length = 0x00e08000; + np->tx_ring[i].next_desc = virt_to_bus(&np->tx_ring[i+1]); + np->tx_buf[i] = kmalloc(PKT_BUF_SZ, GFP_KERNEL); + } + np->tx_ring[i-1].next_desc = virt_to_bus(&np->tx_ring[0]); + + return; +} + +static int start_tx(struct sk_buff *skb, struct device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + unsigned entry; + + /* Block a timer-based transmit from overlapping. This could better be + done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */ + if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) { + if (jiffies - dev->trans_start < TX_TIMEOUT) + return 1; + tx_timeout(dev); + return 1; + } + + /* Caution: the write order is important here, set the field + with the "ownership" bits last. */ + + /* Calculate the next Tx descriptor entry. */ + entry = np->cur_tx % TX_RING_SIZE; + + np->tx_skbuff[entry] = skb; + + if ((long)skb->data & 3) { /* Must use alignment buffer. */ + if (np->tx_buf[entry] == NULL && + (np->tx_buf[entry] = kmalloc(PKT_BUF_SZ, GFP_KERNEL)) == NULL) + return 1; + memcpy(np->tx_buf[entry], skb->data, skb->len); + np->tx_ring[entry].addr = virt_to_bus(np->tx_buf[entry]); + } else + np->tx_ring[entry].addr = virt_to_bus(skb->data); + + np->tx_ring[entry].desc_length = 0x00E08000 | + (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN); + np->tx_ring[entry].tx_own = DescOwn; + + np->cur_tx++; + + /* Non-x86 Todo: explicitly flush cache lines here. */ + + /* Wake the potentially-idle transmit channel. */ + writew(CmdTxDemand | np->chip_cmd, dev->base_addr + ChipCmd); + + if (np->cur_tx - np->dirty_tx < TX_RING_SIZE - 1) + clear_bit(0, (void*)&dev->tbusy); /* Typical path */ + else + np->tx_full = 1; + dev->trans_start = jiffies; + + if (debug > 4) { + printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", + dev->name, np->cur_tx, entry); + } + return 0; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static void intr_handler(int irq, void *dev_instance, struct pt_regs *rgs) +{ + struct device *dev = (struct device *)dev_instance; + struct netdev_private *np; + long ioaddr, boguscnt = max_interrupt_work; + + ioaddr = dev->base_addr; + np = (struct netdev_private *)dev->priv; +#if defined(__i386__) + /* A lock to prevent simultaneous entry bug on Intel SMP machines. */ + if (test_and_set_bit(0, (void*)&dev->interrupt)) { + printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n", + dev->name); + dev->interrupt = 0; /* Avoid halting machine. */ + return; + } +#else + if (dev->interrupt) { + printk(KERN_ERR "%s: Re-entering the interrupt handler.\n", dev->name); + return; + } + dev->interrupt = 1; +#endif + + do { + u32 intr_status = readw(ioaddr + IntrStatus); + + /* Acknowledge all of the current interrupt sources ASAP. */ + writew(intr_status & 0xffff, ioaddr + IntrStatus); + + if (debug > 4) + printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", + dev->name, intr_status); + + if (intr_status == 0) + break; + + if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | + IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) + netdev_rx(dev); + + for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { + int entry = np->dirty_tx % TX_RING_SIZE; + int txstatus; + if (np->tx_ring[entry].tx_own) + break; + txstatus = np->tx_ring[entry].tx_status; + if (debug > 6) + printk(KERN_DEBUG " Tx scavenge %d status %4.4x.\n", + entry, txstatus); + if (txstatus & 0x8000) { + if (debug > 1) + printk(KERN_DEBUG "%s: Transmit error, Tx status %4.4x.\n", + dev->name, txstatus); + np->stats.tx_errors++; + if (txstatus & 0x0400) np->stats.tx_carrier_errors++; + if (txstatus & 0x0200) np->stats.tx_window_errors++; + if (txstatus & 0x0100) np->stats.tx_aborted_errors++; + if (txstatus & 0x0080) np->stats.tx_heartbeat_errors++; + if (txstatus & 0x0002) np->stats.tx_fifo_errors++; +#ifdef ETHER_STATS + if (txstatus & 0x0100) np->stats.collisions16++; +#endif + /* Transmitter restarted in 'abnormal' handler. */ + } else { +#ifdef ETHER_STATS + if (txstatus & 0x0001) np->stats.tx_deferred++; +#endif + np->stats.collisions += (txstatus >> 3) & 15; +#if defined(NETSTATS_VER2) + np->stats.tx_bytes += np->tx_ring[entry].desc_length & 0x7ff; +#endif + np->stats.tx_packets++; + } + /* Free the original skb. */ + dev_free_skb(np->tx_skbuff[entry]); + np->tx_skbuff[entry] = 0; + } + if (np->tx_full && dev->tbusy + && np->cur_tx - np->dirty_tx < TX_RING_SIZE - 4) { + /* The ring is no longer full, clear tbusy. */ + np->tx_full = 0; + clear_bit(0, (void*)&dev->tbusy); + mark_bh(NET_BH); + } + + /* Abnormal error summary/uncommon events handlers. */ + if (intr_status & (IntrPCIErr | IntrLinkChange | IntrMIIChange | + IntrStatsMax | IntrTxAbort | IntrTxUnderrun)) + netdev_error(dev, intr_status); + + if (--boguscnt < 0) { + printk(KERN_WARNING "%s: Too much work at interrupt, " + "status=0x%4.4x.\n", + dev->name, intr_status); + break; + } + } while (1); + + if (debug > 3) + printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", + dev->name, readw(ioaddr + IntrStatus)); + +#if defined(__i386__) + clear_bit(0, (void*)&dev->interrupt); +#else + dev->interrupt = 0; +#endif + return; +} + +/* This routine is logically part of the interrupt handler, but isolated + for clarity and better register allocation. */ +static int netdev_rx(struct device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + int entry = np->cur_rx % RX_RING_SIZE; + int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx; + + if (debug > 4) { + printk(KERN_DEBUG " In netdev_rx(), entry %d status %4.4x.\n", + entry, np->rx_head_desc->rx_length); + } + + /* If EOP is set on the next entry, it's a new packet. Send it up. */ + while ( ! (np->rx_head_desc->rx_length & DescOwn)) { + struct rx_desc *desc = np->rx_head_desc; + int data_size = desc->rx_length; + u16 desc_status = desc->rx_status; + + if (debug > 4) + printk(KERN_DEBUG " netdev_rx() status is %4.4x.\n", + desc_status); + if (--boguscnt < 0) + break; + if ( (desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { + if ((desc_status & RxWholePkt) != RxWholePkt) { + printk(KERN_WARNING "%s: Oversized Ethernet frame spanned " + "multiple buffers, entry %#x length %d status %4.4x!\n", + dev->name, np->cur_rx, data_size, desc_status); + printk(KERN_WARNING "%s: Oversized Ethernet frame %p vs %p.\n", + dev->name, np->rx_head_desc, + &np->rx_ring[np->cur_rx % RX_RING_SIZE]); + np->stats.rx_length_errors++; + } else if (desc_status & RxErr) { + /* There was a error. */ + if (debug > 2) + printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n", + desc_status); + np->stats.rx_errors++; + if (desc_status & 0x0030) np->stats.rx_length_errors++; + if (desc_status & 0x0048) np->stats.rx_fifo_errors++; + if (desc_status & 0x0004) np->stats.rx_frame_errors++; + if (desc_status & 0x0002) np->stats.rx_crc_errors++; + } + } else { + struct sk_buff *skb; + /* Length should omit the CRC */ + u16 pkt_len = data_size - 4; + + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak + && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb->dev = dev; + skb_reserve(skb, 2); /* 16 byte align the IP header */ +#if ! defined(__alpha__) || USE_IP_COPYSUM /* Avoid misaligned on Alpha */ + eth_copy_and_sum(skb, bus_to_virt(desc->addr), + pkt_len, 0); + skb_put(skb, pkt_len); +#else + memcpy(skb_put(skb,pkt_len), bus_to_virt(desc->addr), pkt_len); +#endif + } else { + skb_put(skb = np->rx_skbuff[entry], pkt_len); + np->rx_skbuff[entry] = NULL; + } + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->last_rx = jiffies; + np->stats.rx_packets++; + } + entry = (++np->cur_rx) % RX_RING_SIZE; + np->rx_head_desc = &np->rx_ring[entry]; + } + + /* Refill the Rx ring buffers. */ + for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { + struct sk_buff *skb; + entry = np->dirty_rx % RX_RING_SIZE; + if (np->rx_skbuff[entry] == NULL) { + skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[entry] = skb; + if (skb == NULL) + break; /* Better luck next round. */ + skb->dev = dev; /* Mark as being used by this device. */ + np->rx_ring[entry].addr = virt_to_bus(skb->tail); + } + np->rx_ring[entry].rx_status = 0; + np->rx_ring[entry].rx_length = DescOwn; + } + + /* Pre-emptively restart Rx engine. */ + writew(CmdRxDemand | np->chip_cmd, dev->base_addr + ChipCmd); + return 0; +} + +static void netdev_error(struct device *dev, int intr_status) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + + if (intr_status & (IntrMIIChange | IntrLinkChange)) { + if (readb(ioaddr + MIIStatus) & 0x02) + /* Link failed, restart autonegotiation. */ + mdio_write(dev, np->phys[0], 0, 0x3300); + else + check_duplex(dev); + if (debug) + printk(KERN_ERR "%s: MII status changed: Autonegotiation " + "advertising %4.4x partner %4.4x.\n", dev->name, + mdio_read(dev, np->phys[0], 4), + mdio_read(dev, np->phys[0], 5)); + } + if (intr_status & IntrStatsMax) { + np->stats.rx_crc_errors += readw(ioaddr + RxCRCErrs); + np->stats.rx_missed_errors += readw(ioaddr + RxMissed); + writel(0, RxMissed); + } + if (intr_status & IntrTxAbort) { + /* Stats counted in Tx-done handler, just restart Tx. */ + writew(CmdTxDemand | np->chip_cmd, dev->base_addr + ChipCmd); + } + if (intr_status & IntrTxUnderrun) { + if (np->tx_thresh < 0xE0) + writeb(np->tx_thresh += 0x20, ioaddr + TxConfig); + if (debug > 1) + printk(KERN_INFO "%s: Transmitter underrun, increasing Tx " + "threshold setting to %2.2x.\n", dev->name, np->tx_thresh); + } + if ((intr_status & ~(IntrLinkChange|IntrStatsMax|IntrTxAbort)) && debug) { + printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", + dev->name, intr_status); + /* Recovery for other fault sources not known. */ + writew(CmdTxDemand | np->chip_cmd, dev->base_addr + ChipCmd); + } +} + +static struct enet_statistics *get_stats(struct device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + + /* Nominally we should lock this segment of code for SMP, although + the vulnerability window is very small and statistics are + non-critical. */ + np->stats.rx_crc_errors += readw(ioaddr + RxCRCErrs); + np->stats.rx_missed_errors += readw(ioaddr + RxMissed); + writel(0, RxMissed); + + return &np->stats; +} + +/* The big-endian AUTODIN II ethernet CRC calculation. + N.B. Do not use for bulk data, use a table-based routine instead. + This is common code and should be moved to net/core/crc.c */ +static unsigned const ethernet_polynomial = 0x04c11db7U; +static inline u32 ether_crc(int length, unsigned char *data) +{ + int crc = -1; + + while(--length >= 0) { + unsigned char current_octet = *data++; + int bit; + for (bit = 0; bit < 8; bit++, current_octet >>= 1) { + crc = (crc << 1) ^ + ((crc < 0) ^ (current_octet & 1) ? ethernet_polynomial : 0); + } + } + return crc; +} + +static void set_rx_mode(struct device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + u32 mc_filter[2]; /* Multicast hash filter */ + u8 rx_mode; /* Note: 0x02=accept runt, 0x01=accept errs */ + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + /* Unconditionally log net taps. */ + printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); + rx_mode = 0x1C; + } else if ((dev->mc_count > multicast_filter_limit) + || (dev->flags & IFF_ALLMULTI)) { + /* Too many to match, or accept all multicasts. */ + rx_mode = 0x0C; + } else { + struct dev_mc_list *mclist; + int i; + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + set_bit(ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26, + mc_filter); + } + writel(mc_filter[0], ioaddr + MulticastFilter0); + writel(mc_filter[1], ioaddr + MulticastFilter1); + rx_mode = 0x0C; + } + writeb(np->rx_thresh | rx_mode, ioaddr + RxConfig); +} + +static int mii_ioctl(struct device *dev, struct ifreq *rq, int cmd) +{ + u16 *data = (u16 *)&rq->ifr_data; + + switch(cmd) { + case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */ + data[0] = ((struct netdev_private *)dev->priv)->phys[0] & 0x1f; + /* Fall Through */ + case SIOCDEVPRIVATE+1: /* Read the specified MII register. */ + data[3] = mdio_read(dev, data[0] & 0x1f, data[1] & 0x1f); + return 0; + case SIOCDEVPRIVATE+2: /* Write the specified MII register */ + if (!suser()) + return -EPERM; + mdio_write(dev, data[0] & 0x1f, data[1] & 0x1f, data[2]); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int netdev_close(struct device *dev) +{ + long ioaddr = dev->base_addr; + struct netdev_private *np = (struct netdev_private *)dev->priv; + int i; + + dev->start = 0; + dev->tbusy = 1; + + if (debug > 1) + printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n", + dev->name, readw(ioaddr + ChipCmd)); + + /* Disable interrupts by clearing the interrupt mask. */ + writew(0x0000, ioaddr + IntrEnable); + + /* Stop the chip's Tx and Rx processes. */ + writew(CmdStop, ioaddr + ChipCmd); + + del_timer(&np->timer); + + free_irq(dev->irq, dev); + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].rx_length = 0; + np->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */ + if (np->rx_skbuff[i]) { +#if LINUX_VERSION_CODE < 0x20100 + np->rx_skbuff[i]->free = 1; +#endif + dev_free_skb(np->rx_skbuff[i]); + } + np->rx_skbuff[i] = 0; + } + for (i = 0; i < TX_RING_SIZE; i++) { + if (np->tx_skbuff[i]) + dev_free_skb(np->tx_skbuff[i]); + np->tx_skbuff[i] = 0; + } + + MOD_DEC_USE_COUNT; + + return 0; +} + + +#ifdef MODULE +int init_module(void) +{ + if (debug) /* Emit version even if no cards detected. */ + printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB); +#ifdef CARDBUS + register_driver(ðerdev_ops); + return 0; +#else + return pci_etherdev_probe(NULL, pci_tbl); +#endif +} + +void cleanup_module(void) +{ + +#ifdef CARDBUS + unregister_driver(ðerdev_ops); +#endif + + /* No need to check MOD_IN_USE, as sys_delete_module() checks. */ + while (root_net_dev) { + struct netdev_private *np = + (struct netdev_private *)(root_net_dev->priv); + unregister_netdev(root_net_dev); +#ifdef VIA_USE_IO + release_region(root_net_dev->base_addr, pci_tbl[np->chip_id].io_size); +#else + iounmap((char *)(root_net_dev->base_addr)); +#endif + kfree(root_net_dev); + root_net_dev = np->next_module; +#if 0 + kfree(np); /* Assumption: no struct realignment. */ +#endif + } +} + +#endif /* MODULE */ + +/* + * Local variables: + * compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c via-rhine.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`" + * SMP-compile-command: "gcc -D__SMP__ -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c via-rhine.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`" + * c-indent-level: 4 + * c-basic-offset: 4 + * tab-width: 4 + * End: + */ |