diff options
Diffstat (limited to 'linux/src/drivers/net/sundance.c')
-rw-r--r-- | linux/src/drivers/net/sundance.c | 1556 |
1 files changed, 1556 insertions, 0 deletions
diff --git a/linux/src/drivers/net/sundance.c b/linux/src/drivers/net/sundance.c new file mode 100644 index 0000000..cb8dfe5 --- /dev/null +++ b/linux/src/drivers/net/sundance.c @@ -0,0 +1,1556 @@ +/* sundance.c: A Linux device driver for the Sundance ST201 "Alta". */ +/* + Written 1999-2003 by Donald Becker. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Support information and updates available at + http://www.scyld.com/network/sundance.html +*/ + +/* These identify the driver base version and may not be removed. */ +static const char version1[] = +"sundance.c:v1.11 2/4/2003 Written by Donald Becker <becker@scyld.com>\n"; +static const char version2[] = +" http://www.scyld.com/network/sundance.html\n"; +/* Updated to recommendations in pci-skeleton v2.12. */ + +/* Automatically extracted configuration info: +probe-func: sundance_probe +config-in: tristate 'Sundance ST201 "Alta" PCI Ethernet support' CONFIG_SUNDANCE +c-help-name: Sundance ST201 "Alta" PCI Ethernet support +c-help-symbol: CONFIG_SUNDANCE +c-help: This driver is for the Sundance ST201 "Alta" and Kendin KS8723, as +c-help: used on the D-Link DFE-550 and DFE-580. +c-help: Design information, usage details and updates are available from +c-help: http://www.scyld.com/network/sundance.html +*/ + +/* The user-configurable values. + These may be modified when a driver module is loaded.*/ + +/* Message enable level: 0..31 = no..all messages. See NETIF_MSG docs. */ +static int debug = 2; + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static int max_interrupt_work = 20; + +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + The sundance uses a 64 element hash table based on the Ethernet CRC. */ +static int multicast_filter_limit = 32; + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1518 effectively disables this feature. + This chip can receive into any byte alignment buffers, so word-oriented + archs do not need a copy-align of the IP header. */ +static int rx_copybreak = 0; + +/* Used to pass the media type, etc. + Both 'options[]' and 'full_duplex[]' should exist for driver + interoperability. + The media type is usually passed in 'options[]'. + The default is autonegotation for speed and duplex. + This should rarely be overridden. + Use option values 0x10/0x20 for 10Mbps, 0x100,0x200 for 100Mbps. + Use option values 0x10 and 0x100 for forcing half duplex fixed speed. + Use option values 0x20 and 0x200 for forcing full duplex operation. +*/ +#define MAX_UNITS 8 /* More are supported, limit only on options */ +static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; +static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; + +/* Operational parameters that are set at compile time. */ + +/* Ring sizes are a power of two only for compile efficiency. + The compiler will convert <unsigned>'%'<2^N> into a bit mask. + There must be at least five Tx entries for the tx_full hysteresis, and + more than 31 requires modifying the Tx status handling error recovery. + Leave a inactive gap in the Tx ring for better cache behavior. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + Large receive rings waste memory and impact buffer accounting. + The driver need to protect against interrupt latency and the kernel + not reserving enough available memory. +*/ +#define TX_RING_SIZE 16 +#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#define RX_RING_SIZE 32 + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (6*HZ) + +/* Allocation size of Rx buffers with normal sized Ethernet frames. + Do not change this value without good reason. This is not a limit, + but a way to keep a consistent allocation size among drivers. + */ +#define PKT_BUF_SZ 1536 + +/* Set iff a MII transceiver on any interface requires mdio preamble. + This only set with older tranceivers, so the extra + code size of a per-interface flag is not worthwhile. */ +static char mii_preamble_required = 0; + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif +#if !defined(__OPTIMIZE__) +#warning You must compile this file with the correct options! +#warning See the last lines of the source file. +#error You must compile this driver with "-O". +#endif + +/* Include files, designed to support most kernel versions 2.0.0 and later. */ +#include <linux/config.h> +#if defined(CONFIG_SMP) && ! defined(__SMP__) +#define __SMP__ +#endif +#if defined(MODULE) && defined(CONFIG_MODVERSIONS) && ! defined(MODVERSIONS) +#define MODVERSIONS +#endif + +#include <linux/version.h> +#if defined(MODVERSIONS) +#include <linux/modversions.h> +#endif +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#if LINUX_VERSION_CODE >= 0x20400 +#include <linux/slab.h> +#else +#include <linux/malloc.h> +#endif +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <asm/bitops.h> +#include <asm/io.h> + +#if LINUX_VERSION_CODE >= 0x20300 +#include <linux/spinlock.h> +#elif LINUX_VERSION_CODE >= 0x20200 +#include <asm/spinlock.h> +#endif + +#ifdef INLINE_PCISCAN +#include "k_compat.h" +#else +#include "pci-scan.h" +#include "kern_compat.h" +#endif + +/* Condensed operations for readability. */ +#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr)) +#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr)) + +#if (LINUX_VERSION_CODE >= 0x20100) && defined(MODULE) +char kernel_version[] = UTS_RELEASE; +#endif + +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("Sundance Alta Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_PARM(max_interrupt_work, "i"); +MODULE_PARM(debug, "i"); +MODULE_PARM(rx_copybreak, "i"); +MODULE_PARM(options, "1-" __MODULE_STRING(MAX_UNITS) "i"); +MODULE_PARM(full_duplex, "1-" __MODULE_STRING(MAX_UNITS) "i"); +MODULE_PARM(multicast_filter_limit, "i"); + +MODULE_PARM_DESC(debug, "Driver message level (0-31)"); +MODULE_PARM_DESC(options, "Force transceiver type or fixed speed+duplex"); +MODULE_PARM_DESC(max_interrupt_work, + "Driver maximum events handled per interrupt"); +MODULE_PARM_DESC(full_duplex, + "Non-zero to set forced full duplex (deprecated)."); +MODULE_PARM_DESC(rx_copybreak, + "Breakpoint in bytes for copy-only-tiny-frames"); +MODULE_PARM_DESC(multicast_filter_limit, + "Multicast addresses before switching to Rx-all-multicast"); + +/* + Theory of Operation + +I. Board Compatibility + +This driver is designed for the Sundance Technologies "Alta" ST201 chip. +The Kendin KS8723 is the same design with an integrated transceiver and +new quirks. + +II. Board-specific settings + +This is an all-in-one chip, so there are no board-specific settings. + +III. Driver operation + +IIIa. Ring buffers + +This driver uses two statically allocated fixed-size descriptor lists +formed into rings by a branch from the final descriptor to the beginning of +the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. +Some chips explicitly use only 2^N sized rings, while others use a +'next descriptor' pointer that the driver forms into rings. + +IIIb/c. Transmit/Receive Structure + +This driver uses a zero-copy receive and transmit scheme. +The driver allocates full frame size skbuffs for the Rx ring buffers at +open() time and passes the skb->data field to the chip as receive data +buffers. When an incoming frame is less than RX_COPYBREAK bytes long, +a fresh skbuff is allocated and the frame is copied to the new skbuff. +When the incoming frame is larger, the skbuff is passed directly up the +protocol stack. Buffers consumed this way are replaced by newly allocated +skbuffs in a later phase of receives. + +The RX_COPYBREAK value is chosen to trade-off the memory wasted by +using a full-sized skbuff for small frames vs. the copying costs of larger +frames. New boards are typically used in generously configured machines +and the underfilled buffers have negligible impact compared to the benefit of +a single allocation size, so the default value of zero results in never +copying packets. When copying is done, the cost is usually mitigated by using +a combined copy/checksum routine. Copying also preloads the cache, which is +most useful with small frames. + +A subtle aspect of the operation is that the IP header at offset 14 in an +ethernet frame isn't longword aligned for further processing. +Unaligned buffers are permitted by the Sundance hardware, so +frames are received into the skbuff at an offset of "+2", 16-byte aligning +the IP header. + +IIId. Synchronization + +The driver runs as two independent, single-threaded flows of control. One +is the send-packet routine, which enforces single-threaded use by the +dev->tbusy flag. The other thread is the interrupt handler, which is single +threaded by the hardware and interrupt handling software. + +The send packet thread has partial control over the Tx ring and 'dev->tbusy' +flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next +queue slot is empty, it clears the tbusy flag when finished otherwise it sets +the 'lp->tx_full' flag. + +The interrupt handler has exclusive control over the Rx ring and records stats +from the Tx ring. After reaping the stats, it marks the Tx queue entry as +empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it +clears both the tx_full and tbusy flags. + +IV. Notes + +IVb. References + +The Sundance ST201 datasheet, preliminary version. +The Kendin KS8723 datasheet, preliminary version. +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html + +IVc. Errata + +*/ + + + +/* Work-around for Kendin chip bugs. This will be reversed after tracking + down all of the chip access quirks in memory mode. */ +#ifndef USE_MEM_OPS +#define USE_IO_OPS 1 +#endif + +static void *sundance_probe1(struct pci_dev *pdev, void *init_dev, + long ioaddr, int irq, int chip_idx, int find_cnt); +static int sundance_pwr_event(void *dev_instance, int event); + +enum chip_capability_flags {CanHaveMII=1, KendinPktDropBug=2, }; +#ifdef USE_IO_OPS +#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_IO | PCI_ADDR0) +#else +#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1) +#endif + +static struct pci_id_info pci_id_tbl[] = { + {"D-Link DFE-580TX (Kendin/Sundance ST201 Alta)", + {0x10021186, 0xffffffff, 0x10121186, 0xffffffff, 0x14, 0xff}, + PCI_IOTYPE, 128, CanHaveMII|KendinPktDropBug}, + {"D-Link DFE-580TX (Sundance ST201)", + {0x10021186, 0xffffffff, 0x10121186, 0xffffffff, }, + PCI_IOTYPE, 128, CanHaveMII|KendinPktDropBug}, + {"D-Link DFE-550FX 100baseFx (Sundance ST201)", + {0x10031186, 0xffffffff, }, + PCI_IOTYPE, 128, CanHaveMII|KendinPktDropBug}, + {"OEM Sundance Technology ST201", {0x10021186, 0xffffffff, }, + PCI_IOTYPE, 128, CanHaveMII}, + {"Sundance Technology Alta", {0x020113F0, 0xffffffff, }, + PCI_IOTYPE, 128, CanHaveMII}, + {0,}, /* 0 terminated list. */ +}; + +struct drv_id_info sundance_drv_id = { + "sundance", PCI_HOTSWAP, PCI_CLASS_NETWORK_ETHERNET<<8, pci_id_tbl, + sundance_probe1, sundance_pwr_event }; + +/* This driver was written to use PCI memory space, however x86-oriented + hardware often uses I/O space accesses. */ +#ifdef USE_IO_OPS +#undef readb +#undef readw +#undef readl +#undef writeb +#undef writew +#undef writel +#define readb inb +#define readw inw +#define readl inl +#define writeb outb +#define writew outw +#define writel outl +#endif + +/* Offsets to the device registers. + Unlike software-only systems, device drivers interact with complex hardware. + It's not useful to define symbolic names for every register bit in the + device. The name can only partially document the semantics and make + the driver longer and more difficult to read. + In general, only the important configuration values or bits changed + multiple times should be defined symbolically. +*/ +enum alta_offsets { + DMACtrl=0x00, TxListPtr=0x04, TxDMACtrl=0x08, TxDescPoll=0x0a, + RxDMAStatus=0x0c, RxListPtr=0x10, RxDMACtrl=0x14, RxDescPoll=0x16, + LEDCtrl=0x1a, ASICCtrl=0x30, + EEData=0x34, EECtrl=0x36, TxThreshold=0x3c, + FlashAddr=0x40, FlashData=0x44, WakeEvent=0x45, TxStatus=0x46, + DownCounter=0x48, IntrClear=0x4a, IntrEnable=0x4c, IntrStatus=0x4e, + MACCtrl0=0x50, MACCtrl1=0x52, StationAddr=0x54, + MaxFrameSize=0x5A, RxMode=0x5c, MIICtrl=0x5e, + MulticastFilter0=0x60, MulticastFilter1=0x64, + RxOctetsLow=0x68, RxOctetsHigh=0x6a, TxOctetsLow=0x6c, TxOctetsHigh=0x6e, + TxFramesOK=0x70, RxFramesOK=0x72, StatsCarrierError=0x74, + StatsLateColl=0x75, StatsMultiColl=0x76, StatsOneColl=0x77, + StatsTxDefer=0x78, RxMissed=0x79, StatsTxXSDefer=0x7a, StatsTxAbort=0x7b, + StatsBcastTx=0x7c, StatsBcastRx=0x7d, StatsMcastTx=0x7e, StatsMcastRx=0x7f, + /* Aliased and bogus values! */ + RxStatus=0x0c, +}; + +/* Bits in the interrupt status/mask registers. */ +enum intr_status_bits { + IntrSummary=0x0001, IntrPCIErr=0x0002, IntrMACCtrl=0x0008, + IntrTxDone=0x0004, IntrRxDone=0x0010, IntrRxStart=0x0020, + IntrDrvRqst=0x0040, + StatsMax=0x0080, LinkChange=0x0100, + IntrTxDMADone=0x0200, IntrRxDMADone=0x0400, +}; + +/* Bits in the RxMode register. */ +enum rx_mode_bits { + AcceptAllIPMulti=0x20, AcceptMultiHash=0x10, AcceptAll=0x08, + AcceptBroadcast=0x04, AcceptMulticast=0x02, AcceptMyPhys=0x01, +}; +/* Bits in MACCtrl. */ +enum mac_ctrl0_bits { + EnbFullDuplex=0x20, EnbRcvLargeFrame=0x40, + EnbFlowCtrl=0x100, EnbPassRxCRC=0x200, +}; +enum mac_ctrl1_bits { + StatsEnable=0x0020, StatsDisable=0x0040, StatsEnabled=0x0080, + TxEnable=0x0100, TxDisable=0x0200, TxEnabled=0x0400, + RxEnable=0x0800, RxDisable=0x1000, RxEnabled=0x2000, +}; + +/* The Rx and Tx buffer descriptors. + Using only 32 bit fields simplifies software endian correction. + This structure must be aligned, and should avoid spanning cache lines. +*/ +struct netdev_desc { + u32 next_desc; + u32 status; + struct desc_frag { u32 addr, length; } frag[1]; +}; + +/* Bits in netdev_desc.status */ +enum desc_status_bits { + DescOwn=0x8000, DescEndPacket=0x4000, DescEndRing=0x2000, + DescTxDMADone=0x10000, + LastFrag=0x80000000, DescIntrOnTx=0x8000, DescIntrOnDMADone=0x80000000, +}; + +#define PRIV_ALIGN 15 /* Required alignment mask */ +/* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment + within the structure. */ +struct netdev_private { + /* Descriptor rings first for alignment. */ + struct netdev_desc rx_ring[RX_RING_SIZE]; + struct netdev_desc tx_ring[TX_RING_SIZE]; + struct net_device *next_module; /* Link for devices of this type. */ + void *priv_addr; /* Unaligned address for kfree */ + const char *product_name; + /* The addresses of receive-in-place skbuffs. */ + struct sk_buff* rx_skbuff[RX_RING_SIZE]; + /* The saved address of a sent-in-place packet/buffer, for later free(). */ + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + struct net_device_stats stats; + struct timer_list timer; /* Media monitoring timer. */ + /* Frequently used values: keep some adjacent for cache effect. */ + int msg_level; + int chip_id, drv_flags; + struct pci_dev *pci_dev; + int max_interrupt_work; + + /* Note: Group variables for cache line effect. */ + struct netdev_desc *rx_head_desc; + unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + int rx_copybreak; + + spinlock_t txlock; /* Group with Tx control cache line. */ + struct netdev_desc *last_tx; /* Last Tx descriptor used. */ + unsigned int cur_tx, dirty_tx; + unsigned int tx_full:1; /* The Tx queue is full. */ + + /* These values keep track of the transceiver/media in use. */ + unsigned int full_duplex:1; /* Full-duplex operation requested. */ + unsigned int duplex_lock:1; + unsigned int medialock:1; /* Do not sense media. */ + unsigned int default_port; /* Last dev->if_port value. */ + /* Multicast and receive mode. */ + spinlock_t mcastlock; /* SMP lock multicast updates. */ + u16 mcast_filter[4]; + int multicast_filter_limit; + + /* MII transceiver section. */ + int mii_cnt; /* MII device addresses. */ + int link_status; + u16 advertising; /* NWay media advertisement */ + unsigned char phys[2]; /* MII device addresses. */ +}; + +/* The station address location in the EEPROM. */ +#define EEPROM_SA_OFFSET 0x10 + +static int eeprom_read(long ioaddr, int location); +static int mdio_read(struct net_device *dev, int phy_id, + unsigned int location); +static void mdio_write(struct net_device *dev, int phy_id, + unsigned int location, int value); +static int netdev_open(struct net_device *dev); +static void sundance_start(struct net_device *dev); +static int change_mtu(struct net_device *dev, int new_mtu); +static void check_duplex(struct net_device *dev); +static void netdev_timer(unsigned long data); +static void tx_timeout(struct net_device *dev); +static void init_ring(struct net_device *dev); +static int start_tx(struct sk_buff *skb, struct net_device *dev); +static void intr_handler(int irq, void *dev_instance, struct pt_regs *regs); +static void netdev_error(struct net_device *dev, int intr_status); +static int netdev_rx(struct net_device *dev); +static void netdev_error(struct net_device *dev, int intr_status); +static void set_rx_mode(struct net_device *dev); +static struct net_device_stats *get_stats(struct net_device *dev); +static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int netdev_close(struct net_device *dev); + + + +/* A list of our installed devices, for removing the driver module. */ +static struct net_device *root_net_dev = NULL; + +#ifndef MODULE +int sundance_probe(struct net_device *dev) +{ + if (pci_drv_register(&sundance_drv_id, dev) < 0) + return -ENODEV; + if (debug >= NETIF_MSG_DRV) /* Emit version even if no cards detected. */ + printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2); + return 0; +} +#endif + +static void *sundance_probe1(struct pci_dev *pdev, void *init_dev, + long ioaddr, int irq, int chip_idx, int card_idx) +{ + struct net_device *dev; + struct netdev_private *np; + void *priv_mem; + int i, option = card_idx < MAX_UNITS ? options[card_idx] : 0; + + dev = init_etherdev(init_dev, 0); + if (!dev) + return NULL; + + /* Perhaps NETIF_MSG_PROBE */ + printk(KERN_INFO "%s: %s at 0x%lx, ", + dev->name, pci_id_tbl[chip_idx].name, ioaddr); + + for (i = 0; i < 3; i++) + ((u16 *)dev->dev_addr)[i] = + le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); + for (i = 0; i < 5; i++) + printk("%2.2x:", dev->dev_addr[i]); + printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq); + + /* Make certain elements e.g. descriptor lists are aligned. */ + priv_mem = kmalloc(sizeof(*np) + PRIV_ALIGN, GFP_KERNEL); + /* Check for the very unlikely case of no memory. */ + if (priv_mem == NULL) + return NULL; + + /* All failure checks before this point. + We do a request_region() only to register /proc/ioports info. */ +#ifdef USE_IO_OPS + request_region(ioaddr, pci_id_tbl[chip_idx].io_size, dev->name); +#endif + + dev->base_addr = ioaddr; + dev->irq = irq; + + dev->priv = np = (void *)(((long)priv_mem + PRIV_ALIGN) & ~PRIV_ALIGN); + memset(np, 0, sizeof(*np)); + np->priv_addr = priv_mem; + + np->next_module = root_net_dev; + root_net_dev = dev; + + np->pci_dev = pdev; + np->chip_id = chip_idx; + np->drv_flags = pci_id_tbl[chip_idx].drv_flags; + np->msg_level = (1 << debug) - 1; + np->rx_copybreak = rx_copybreak; + np->max_interrupt_work = max_interrupt_work; + np->multicast_filter_limit = multicast_filter_limit; + + if (dev->mem_start) + option = dev->mem_start; + + if (card_idx < MAX_UNITS && full_duplex[card_idx] > 0) + np->full_duplex = 1; + + if (np->full_duplex) + np->medialock = 1; + + /* The chip-specific entries in the device structure. */ + dev->open = &netdev_open; + dev->hard_start_xmit = &start_tx; + dev->stop = &netdev_close; + dev->get_stats = &get_stats; + dev->set_multicast_list = &set_rx_mode; + dev->do_ioctl = &mii_ioctl; + dev->change_mtu = &change_mtu; + + if (1) { + int phy, phy_idx = 0; + np->phys[0] = 1; /* Default setting */ + mii_preamble_required++; + for (phy = 1; phy < 32 && phy_idx < 4; phy++) { + int mii_status = mdio_read(dev, phy, 1); + if (mii_status != 0xffff && mii_status != 0x0000) { + np->phys[phy_idx++] = phy; + np->advertising = mdio_read(dev, phy, 4); + if ((mii_status & 0x0040) == 0) + mii_preamble_required++; + if (np->msg_level & NETIF_MSG_PROBE) + printk(KERN_INFO "%s: MII PHY found at address %d, status " + "0x%4.4x advertising %4.4x.\n", + dev->name, phy, mii_status, np->advertising); + } + } + mii_preamble_required--; + np->mii_cnt = phy_idx; + if (phy_idx == 0) + printk(KERN_INFO "%s: No MII transceiver found!, ASIC status %x\n", + dev->name, (int)readl(ioaddr + ASICCtrl)); + } + + /* Allow forcing the media type. */ + if (option > 0) { + if (option & 0x220) + np->full_duplex = 1; + np->default_port = option & 0x3ff; + if (np->default_port & 0x330) { + np->medialock = 1; + if (np->msg_level & NETIF_MSG_PROBE) + printk(KERN_INFO " Forcing %dMbs %s-duplex operation.\n", + (option & 0x300 ? 100 : 10), + (np->full_duplex ? "full" : "half")); + if (np->mii_cnt) + mdio_write(dev, np->phys[0], 0, + ((option & 0x300) ? 0x2000 : 0) | /* 100mbps? */ + (np->full_duplex ? 0x0100 : 0)); /* Full duplex? */ + } + } + + /* Reset the chip to erase previous misconfiguration. */ + if (np->msg_level & NETIF_MSG_MISC) + printk("ASIC Control is %x.\n", (int)readl(ioaddr + ASICCtrl)); + writel(0x007f0000 | readl(ioaddr + ASICCtrl), ioaddr + ASICCtrl); + if (np->msg_level & NETIF_MSG_MISC) + printk("ASIC Control is now %x.\n", (int)readl(ioaddr + ASICCtrl)); + + return dev; +} + + + +static int change_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < 68) || (new_mtu > 8191)) /* Limited by RxDMAFrameLen */ + return -EINVAL; + if (netif_running(dev)) + return -EBUSY; + dev->mtu = new_mtu; + return 0; +} + +/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. */ +static int eeprom_read(long ioaddr, int location) +{ + int boguscnt = 2000; /* Typical 190 ticks. */ + writew(0x0200 | (location & 0xff), ioaddr + EECtrl); + do { + if (! (readw(ioaddr + EECtrl) & 0x8000)) { + return readw(ioaddr + EEData); + } + } while (--boguscnt > 0); + return 0; +} + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. See the MII specifications or DP83840A data sheet + for details. + + The maximum data clock rate is 2.5 Mhz. + The timing is decoupled from the processor clock by flushing the write + from the CPU write buffer with a following read, and using PCI + transaction time. */ +#define mdio_in(mdio_addr) readb(mdio_addr) +#define mdio_out(value, mdio_addr) writeb(value, mdio_addr) +#define mdio_delay(mdio_addr) readb(mdio_addr) + +enum mii_reg_bits { + MDIO_ShiftClk=0x0001, MDIO_Data=0x0002, MDIO_EnbOutput=0x0004, +}; +#define MDIO_EnbIn (0) +#define MDIO_WRITE0 (MDIO_EnbOutput) +#define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput) + +/* Generate the preamble required for initial synchronization and + a few older transceivers. */ +static void mdio_sync(long mdio_addr) +{ + int bits = 32; + + /* Establish sync by sending at least 32 logic ones. */ + while (--bits >= 0) { + mdio_out(MDIO_WRITE1, mdio_addr); + mdio_delay(mdio_addr); + mdio_out(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } +} + +static int mdio_read(struct net_device *dev, int phy_id, unsigned int location) +{ + long mdio_addr = dev->base_addr + MIICtrl; + int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; + int i, retval = 0; + + if (mii_preamble_required) + mdio_sync(mdio_addr); + + /* Shift the read command bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + + mdio_out(dataval, mdio_addr); + mdio_delay(mdio_addr); + mdio_out(dataval | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + mdio_out(MDIO_EnbIn, mdio_addr); + mdio_delay(mdio_addr); + retval = (retval << 1) | ((mdio_in(mdio_addr) & MDIO_Data) ? 1 : 0); + mdio_out(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + return (retval>>1) & 0xffff; +} + +static void mdio_write(struct net_device *dev, int phy_id, + unsigned int location, int value) +{ + long mdio_addr = dev->base_addr + MIICtrl; + int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; + int i; + + if (mii_preamble_required) + mdio_sync(mdio_addr); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + + mdio_out(dataval, mdio_addr); + mdio_delay(mdio_addr); + mdio_out(dataval | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + mdio_out(MDIO_EnbIn, mdio_addr); + mdio_delay(mdio_addr); + mdio_out(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + return; +} + + +static int netdev_open(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + + MOD_INC_USE_COUNT; + + if (request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev)) { + MOD_DEC_USE_COUNT; + return -EAGAIN; + } + + if (np->msg_level & NETIF_MSG_IFUP) + printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", + dev->name, dev->irq); + + init_ring(dev); + + if (dev->if_port == 0) + dev->if_port = np->default_port; + + np->full_duplex = np->duplex_lock; + np->mcastlock = (spinlock_t) SPIN_LOCK_UNLOCKED; + + sundance_start(dev); + netif_start_tx_queue(dev); + + if (np->msg_level & NETIF_MSG_IFUP) + printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x " + "MAC Control %x, %4.4x %4.4x.\n", + dev->name, (int)readl(ioaddr + RxStatus), + (int)readw(ioaddr + TxStatus), (int)readl(ioaddr + MACCtrl0), + (int)readw(ioaddr + MACCtrl1), (int)readw(ioaddr + MACCtrl0)); + + /* Set the timer to check for link beat. */ + init_timer(&np->timer); + np->timer.expires = jiffies + 3*HZ; + np->timer.data = (unsigned long)dev; + np->timer.function = &netdev_timer; /* timer handler */ + add_timer(&np->timer); + + return 0; +} + +static void sundance_start(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + int i; + + /* No reports have indicated that we need to reset the chip. */ + + writel(virt_to_bus(&np->rx_ring[np->cur_rx % RX_RING_SIZE]), + ioaddr + RxListPtr); + /* The Tx list pointer is written as packets are queued. */ + + /* Station address must be written as 16 bit words with the Kendin chip. */ + for (i = 0; i < 6; i += 2) + writew((dev->dev_addr[i + 1] << 8) + dev->dev_addr[i], + ioaddr + StationAddr + i); + + np->link_status = readb(ioaddr + MIICtrl) & 0xE0; + writew((np->full_duplex || (np->link_status & 0x20)) ? 0x120 : 0, + ioaddr + MACCtrl0); + writew(dev->mtu + 14, ioaddr + MaxFrameSize); + if (dev->mtu > 2047) + writel(readl(ioaddr + ASICCtrl) | 0x0C, ioaddr + ASICCtrl); + + set_rx_mode(dev); + writew(0, ioaddr + DownCounter); + /* Set the chip to poll every N*320nsec. */ + writeb(100, ioaddr + RxDescPoll); + writeb(127, ioaddr + TxDescPoll); +#if 0 + if (np->drv_flags & KendinPktDropBug) + writeb(0x01, ioaddr + DebugCtrl1); +#endif + + /* Enable interrupts by setting the interrupt mask. */ + writew(IntrRxDMADone | IntrPCIErr | IntrDrvRqst | IntrTxDone + | StatsMax | LinkChange, ioaddr + IntrEnable); + writew(StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); +} + +static void check_duplex(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + int mii_reg5 = mdio_read(dev, np->phys[0], 5); + int negotiated = mii_reg5 & np->advertising; + int duplex; + + if (np->duplex_lock || mii_reg5 == 0xffff) + return; + duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040; + if (np->full_duplex != duplex) { + np->full_duplex = duplex; + if (np->msg_level & NETIF_MSG_LINK) + printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d " + "negotiated capability %4.4x.\n", dev->name, + duplex ? "full" : "half", np->phys[0], negotiated); + writew(duplex ? 0x20 : 0, ioaddr + MACCtrl0); + } +} + +static void netdev_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + int next_tick = 10*HZ; + + if (np->msg_level & NETIF_MSG_TIMER) { + printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, " + "Tx %x Rx %x.\n", + dev->name, (int)readw(ioaddr + IntrEnable), + (int)readw(ioaddr + TxStatus), (int)readl(ioaddr + RxStatus)); + } + /* Note: This does not catch a 0 or 1 element stuck queue. */ + if (netif_queue_paused(dev) && + np->cur_tx - np->dirty_tx > 1 && + (jiffies - dev->trans_start) > TX_TIMEOUT) { + tx_timeout(dev); + } + check_duplex(dev); + np->timer.expires = jiffies + next_tick; + add_timer(&np->timer); +} + +static void tx_timeout(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + + printk(KERN_WARNING "%s: Transmit timed out, status %4.4x," + " resetting...\n", dev->name, (int)readw(ioaddr + TxStatus)); + +#ifdef __i386__ + if (np->msg_level & NETIF_MSG_TX_ERR) { + int i; + printk(KERN_DEBUG " Rx ring %8.8x: ", (int)np->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) + printk(" %8.8x", (unsigned int)np->rx_ring[i].status); + printk("\n"KERN_DEBUG" Tx ring %8.8x: ", (int)np->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) + printk(" %8.8x", np->tx_ring[i].status); + printk("\n"); + } +#endif + + /* Perhaps we should reinitialize the hardware here. */ + dev->if_port = 0; + /* Stop and restart the chip's Tx processes . */ + + /* Trigger an immediate transmit demand. */ + writew(IntrRxDMADone | IntrPCIErr | IntrDrvRqst | IntrTxDone + | StatsMax | LinkChange, ioaddr + IntrEnable); + + dev->trans_start = jiffies; + np->stats.tx_errors++; + return; +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void init_ring(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + int i; + + np->tx_full = 0; + np->cur_rx = np->cur_tx = 0; + np->dirty_rx = np->dirty_tx = 0; + + np->rx_buf_sz = dev->mtu + 20; + if (np->rx_buf_sz < PKT_BUF_SZ) + np->rx_buf_sz = PKT_BUF_SZ; + np->rx_head_desc = &np->rx_ring[0]; + + /* Initialize all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].next_desc = virt_to_le32desc(&np->rx_ring[i+1]); + np->rx_ring[i].status = 0; + np->rx_ring[i].frag[0].length = 0; + np->rx_skbuff[i] = 0; + } + /* Wrap the ring. */ + np->rx_ring[i-1].next_desc = virt_to_le32desc(&np->rx_ring[0]); + + /* Fill in the Rx buffers. Handle allocation failure gracefully. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[i] = skb; + if (skb == NULL) + break; + skb->dev = dev; /* Mark as being used by this device. */ + skb_reserve(skb, 2); /* 16 byte align the IP header. */ + np->rx_ring[i].frag[0].addr = virt_to_le32desc(skb->tail); + np->rx_ring[i].frag[0].length = cpu_to_le32(np->rx_buf_sz | LastFrag); + } + np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = 0; + np->tx_ring[i].status = 0; + } + return; +} + +static int start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + struct netdev_desc *txdesc; + unsigned entry; + + /* Block a timer-based transmit from overlapping. */ + if (netif_pause_tx_queue(dev) != 0) { + /* This watchdog code is redundant with the media monitor timer. */ + if (jiffies - dev->trans_start > TX_TIMEOUT) + tx_timeout(dev); + return 1; + } + + /* Note: Ordering is important here, set the field with the + "ownership" bit last, and only then increment cur_tx. */ + + /* Calculate the next Tx descriptor entry. */ + entry = np->cur_tx % TX_RING_SIZE; + np->tx_skbuff[entry] = skb; + txdesc = &np->tx_ring[entry]; + + txdesc->next_desc = 0; + /* Note: disable the interrupt generation here before releasing. */ + txdesc->status = + cpu_to_le32((entry<<2) | DescIntrOnDMADone | DescIntrOnTx | 1); + txdesc->frag[0].addr = virt_to_le32desc(skb->data); + txdesc->frag[0].length = cpu_to_le32(skb->len | LastFrag); + if (np->last_tx) + np->last_tx->next_desc = virt_to_le32desc(txdesc); + np->last_tx = txdesc; + np->cur_tx++; + + /* On some architectures: explicitly flush cache lines here. */ + + if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) { + np->tx_full = 1; + /* Check for a just-cleared queue. */ + if (np->cur_tx - (volatile unsigned int)np->dirty_tx + < TX_QUEUE_LEN - 2) { + np->tx_full = 0; + netif_unpause_tx_queue(dev); + } else + netif_stop_tx_queue(dev); + } else + netif_unpause_tx_queue(dev); /* Typical path */ + + /* Side effect: The read wakes the potentially-idle transmit channel. */ + if (readl(dev->base_addr + TxListPtr) == 0) + writel(virt_to_bus(&np->tx_ring[entry]), dev->base_addr + TxListPtr); + + dev->trans_start = jiffies; + + if (np->msg_level & NETIF_MSG_TX_QUEUED) { + printk(KERN_DEBUG "%s: Transmit frame #%d len %d queued in slot %d.\n", + dev->name, np->cur_tx, skb->len, entry); + } + return 0; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static void intr_handler(int irq, void *dev_instance, struct pt_regs *rgs) +{ + struct net_device *dev = (struct net_device *)dev_instance; + struct netdev_private *np; + long ioaddr; + int boguscnt; + + ioaddr = dev->base_addr; + np = (struct netdev_private *)dev->priv; + boguscnt = np->max_interrupt_work; + + do { + int intr_status = readw(ioaddr + IntrStatus); + if ((intr_status & ~IntrRxDone) == 0 || intr_status == 0xffff) + break; + + writew(intr_status & (IntrRxDMADone | IntrPCIErr | + IntrDrvRqst |IntrTxDone|IntrTxDMADone | + StatsMax | LinkChange), + ioaddr + IntrStatus); + + if (np->msg_level & NETIF_MSG_INTR) + printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", + dev->name, intr_status); + + if (intr_status & IntrRxDMADone) + netdev_rx(dev); + + if (intr_status & IntrTxDone) { + int txboguscnt = 32; + int tx_status = readw(ioaddr + TxStatus); + while (tx_status & 0x80) { + if (np->msg_level & NETIF_MSG_TX_DONE) + printk("%s: Transmit status is %4.4x.\n", + dev->name, tx_status); + if (tx_status & 0x1e) { + if (np->msg_level & NETIF_MSG_TX_ERR) + printk("%s: Transmit error status %4.4x.\n", + dev->name, tx_status); + np->stats.tx_errors++; + if (tx_status & 0x10) np->stats.tx_fifo_errors++; +#ifdef ETHER_STATS + if (tx_status & 0x08) np->stats.collisions16++; +#else + if (tx_status & 0x08) np->stats.collisions++; +#endif + if (tx_status & 0x04) np->stats.tx_fifo_errors++; + if (tx_status & 0x02) np->stats.tx_window_errors++; + /* This reset has not been verified!. */ + if (tx_status & 0x10) { /* Reset the Tx. */ + writel(0x001c0000 | readl(ioaddr + ASICCtrl), + ioaddr + ASICCtrl); +#if 0 /* Do we need to reset the Tx pointer here? */ + writel(virt_to_bus(&np->tx_ring[np->dirty_tx]), + dev->base_addr + TxListPtr); +#endif + } + if (tx_status & 0x1e) /* Restart the Tx. */ + writew(TxEnable, ioaddr + MACCtrl1); + } + /* Yup, this is a documentation bug. It cost me *hours*. */ + writew(0, ioaddr + TxStatus); + if (--txboguscnt < 0) + break; + tx_status = readw(ioaddr + TxStatus); + } + } + for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { + int entry = np->dirty_tx % TX_RING_SIZE; + if ( ! (np->tx_ring[entry].status & cpu_to_le32(DescTxDMADone))) + break; + /* Free the original skb. */ + dev_free_skb_irq(np->tx_skbuff[entry]); + np->tx_skbuff[entry] = 0; + } + if (np->tx_full && np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { + /* The ring is no longer full, allow new TX entries. */ + np->tx_full = 0; + netif_resume_tx_queue(dev); + } + + /* Abnormal error summary/uncommon events handlers. */ + if (intr_status & (IntrDrvRqst | IntrPCIErr | LinkChange | StatsMax)) + netdev_error(dev, intr_status); + + if (--boguscnt < 0) { + int intr_clear = readw(ioaddr + IntrClear); + get_stats(dev); + printk(KERN_WARNING "%s: Too much work at interrupt, " + "status=0x%4.4x / 0x%4.4x .. 0x%4.4x.\n", + dev->name, intr_status, intr_clear, + (int)readw(ioaddr + IntrClear)); + /* Re-enable us in 3.2msec. */ + writew(1000, ioaddr + DownCounter); + writew(IntrDrvRqst, ioaddr + IntrEnable); + break; + } + } while (1); + + if (np->msg_level & NETIF_MSG_INTR) + printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", + dev->name, (int)readw(ioaddr + IntrStatus)); + + return; +} + +/* This routine is logically part of the interrupt handler, but separated + for clarity and better register allocation. */ +static int netdev_rx(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + int entry = np->cur_rx % RX_RING_SIZE; + int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx; + + if (np->msg_level & NETIF_MSG_RX_STATUS) { + printk(KERN_DEBUG " In netdev_rx(), entry %d status %4.4x.\n", + entry, np->rx_ring[entry].status); + } + + /* If EOP is set on the next entry, it's a new packet. Send it up. */ + while (np->rx_head_desc->status & cpu_to_le32(DescOwn)) { + struct netdev_desc *desc = np->rx_head_desc; + u32 frame_status = le32_to_cpu(desc->status); + int pkt_len = frame_status & 0x1fff; /* Chip omits the CRC. */ + + if (np->msg_level & NETIF_MSG_RX_STATUS) + printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", + frame_status); + if (--boguscnt < 0) + break; + if (frame_status & 0x001f4000) { + /* There was a error. */ + if (np->msg_level & NETIF_MSG_RX_ERR) + printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n", + frame_status); + np->stats.rx_errors++; + if (frame_status & 0x00100000) np->stats.rx_length_errors++; + if (frame_status & 0x00010000) np->stats.rx_fifo_errors++; + if (frame_status & 0x00060000) np->stats.rx_frame_errors++; + if (frame_status & 0x00080000) np->stats.rx_crc_errors++; + if (frame_status & 0x00100000) { + printk(KERN_WARNING "%s: Oversized Ethernet frame," + " status %8.8x.\n", + dev->name, frame_status); + } + } else { + struct sk_buff *skb; + +#ifndef final_version + if (np->msg_level & NETIF_MSG_RX_STATUS) + printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" + ", bogus_cnt %d.\n", + pkt_len, boguscnt); +#endif + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < np->rx_copybreak + && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb->dev = dev; + skb_reserve(skb, 2); /* 16 byte align the IP header */ + eth_copy_and_sum(skb, np->rx_skbuff[entry]->tail, pkt_len, 0); + skb_put(skb, pkt_len); + } else { + skb_put(skb = np->rx_skbuff[entry], pkt_len); + np->rx_skbuff[entry] = NULL; + } + skb->protocol = eth_type_trans(skb, dev); + /* Note: checksum -> skb->ip_summed = CHECKSUM_UNNECESSARY; */ + netif_rx(skb); + dev->last_rx = jiffies; + } + entry = (++np->cur_rx) % RX_RING_SIZE; + np->rx_head_desc = &np->rx_ring[entry]; + } + + /* Refill the Rx ring buffers. */ + for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { + struct sk_buff *skb; + entry = np->dirty_rx % RX_RING_SIZE; + if (np->rx_skbuff[entry] == NULL) { + skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[entry] = skb; + if (skb == NULL) + break; /* Better luck next round. */ + skb->dev = dev; /* Mark as being used by this device. */ + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + np->rx_ring[entry].frag[0].addr = virt_to_le32desc(skb->tail); + } + /* Perhaps we need not reset this field. */ + np->rx_ring[entry].frag[0].length = + cpu_to_le32(np->rx_buf_sz | LastFrag); + np->rx_ring[entry].status = 0; + } + + /* No need to restart Rx engine, it will poll. */ + return 0; +} + +static void netdev_error(struct net_device *dev, int intr_status) +{ + long ioaddr = dev->base_addr; + struct netdev_private *np = (struct netdev_private *)dev->priv; + + if (intr_status & IntrDrvRqst) { + /* Stop the down counter and turn interrupts back on. */ + printk(KERN_WARNING "%s: Turning interrupts back on.\n", dev->name); + writew(0, ioaddr + DownCounter); + writew(IntrRxDMADone | IntrPCIErr | IntrDrvRqst | + IntrTxDone | StatsMax | LinkChange, ioaddr + IntrEnable); + } + if (intr_status & LinkChange) { + int new_status = readb(ioaddr + MIICtrl) & 0xE0; + if (np->msg_level & NETIF_MSG_LINK) + printk(KERN_NOTICE "%s: Link changed: Autonegotiation advertising" + " %4.4x partner %4.4x.\n", dev->name, + mdio_read(dev, np->phys[0], 4), + mdio_read(dev, np->phys[0], 5)); + if ((np->link_status ^ new_status) & 0x80) { + if (new_status & 0x80) + netif_link_up(dev); + else + netif_link_down(dev); + } + np->link_status = new_status; + check_duplex(dev); + } + if (intr_status & StatsMax) { + get_stats(dev); + } + if (intr_status & IntrPCIErr) { + printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", + dev->name, intr_status); + /* We must do a global reset of DMA to continue. */ + } +} + +static struct net_device_stats *get_stats(struct net_device *dev) +{ + long ioaddr = dev->base_addr; + struct netdev_private *np = (struct netdev_private *)dev->priv; + int i; + + if (readw(ioaddr + StationAddr) == 0xffff) + return &np->stats; + + /* We do not spinlock statistics. + A window only exists if we have non-atomic adds, the error counts + are typically zero, and statistics are non-critical. */ + np->stats.rx_missed_errors += readb(ioaddr + RxMissed); + np->stats.tx_packets += readw(ioaddr + TxFramesOK); + np->stats.rx_packets += readw(ioaddr + RxFramesOK); + np->stats.collisions += readb(ioaddr + StatsLateColl); + np->stats.collisions += readb(ioaddr + StatsMultiColl); + np->stats.collisions += readb(ioaddr + StatsOneColl); + readb(ioaddr + StatsCarrierError); + readb(ioaddr + StatsTxDefer); + for (i = StatsTxXSDefer; i <= StatsMcastRx; i++) + readb(ioaddr + i); +#if LINUX_VERSION_CODE > 0x20127 + np->stats.tx_bytes += readw(ioaddr + TxOctetsLow); + np->stats.tx_bytes += readw(ioaddr + TxOctetsHigh) << 16; + np->stats.rx_bytes += readw(ioaddr + RxOctetsLow); + np->stats.rx_bytes += readw(ioaddr + RxOctetsHigh) << 16; +#else + readw(ioaddr + TxOctetsLow); + readw(ioaddr + TxOctetsHigh); + readw(ioaddr + RxOctetsLow); + readw(ioaddr + RxOctetsHigh); +#endif + + return &np->stats; +} + +/* The little-endian AUTODIN II ethernet CRC calculations. + A big-endian version is also available. + This is slow but compact code. Do not use this routine for bulk data, + use a table-based routine instead. + This is common code and should be moved to net/core/crc.c. + Chips may use the upper or lower CRC bits, and may reverse and/or invert + them. Select the endian-ness that results in minimal calculations. +*/ +static unsigned const ethernet_polynomial_le = 0xedb88320U; +static inline unsigned ether_crc_le(int length, unsigned char *data) +{ + unsigned int crc = ~0; /* Initial value. */ + while(--length >= 0) { + unsigned char current_octet = *data++; + int bit; + for (bit = 8; --bit >= 0; current_octet >>= 1) { + if ((crc ^ current_octet) & 1) { + crc >>= 1; + crc ^= ethernet_polynomial_le; + } else + crc >>= 1; + } + } + return crc; +} + +static void set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + u16 mc_filter[4]; /* Multicast hash filter */ + u32 rx_mode; + int i; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + /* Unconditionally log net taps. */ + printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); + memset(mc_filter, ~0, sizeof(mc_filter)); + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys; + } else if ((dev->mc_count > np->multicast_filter_limit) + || (dev->flags & IFF_ALLMULTI)) { + /* Too many to match, or accept all multicasts. */ + memset(mc_filter, 0xff, sizeof(mc_filter)); + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + } else if (dev->mc_count) { + struct dev_mc_list *mclist; + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + set_bit(ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f, + mc_filter); + } + rx_mode = AcceptBroadcast | AcceptMultiHash | AcceptMyPhys; + } else { + writeb(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode); + return; + } + for (i = 0; i < 4; i++) + writew(mc_filter[i], ioaddr + MulticastFilter0 + i*2); + writeb(rx_mode, ioaddr + RxMode); +} + +static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct netdev_private *np = (struct netdev_private *)dev->priv; + u16 *data = (u16 *)&rq->ifr_data; + u32 *data32 = (void *)&rq->ifr_data; + + switch(cmd) { + case 0x8947: case 0x89F0: + /* SIOCGMIIPHY: Get the address of the PHY in use. */ + data[0] = np->phys[0] & 0x1f; + /* Fall Through */ + case 0x8948: case 0x89F1: + /* SIOCGMIIREG: Read the specified MII register. */ + data[3] = mdio_read(dev, data[0] & 0x1f, data[1] & 0x1f); + return 0; + case 0x8949: case 0x89F2: + /* SIOCSMIIREG: Write the specified MII register */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (data[0] == np->phys[0]) { + u16 value = data[2]; + switch (data[1]) { + case 0: + /* Check for autonegotiation on or reset. */ + np->medialock = (value & 0x9000) ? 0 : 1; + if (np->medialock) + np->full_duplex = (value & 0x0100) ? 1 : 0; + break; + case 4: np->advertising = value; break; + } + /* Perhaps check_duplex(dev), depending on chip semantics. */ + } + mdio_write(dev, data[0] & 0x1f, data[1] & 0x1f, data[2]); + return 0; + case SIOCGPARAMS: + data32[0] = np->msg_level; + data32[1] = np->multicast_filter_limit; + data32[2] = np->max_interrupt_work; + data32[3] = np->rx_copybreak; + return 0; + case SIOCSPARAMS: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + np->msg_level = data32[0]; + np->multicast_filter_limit = data32[1]; + np->max_interrupt_work = data32[2]; + np->rx_copybreak = data32[3]; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int sundance_pwr_event(void *dev_instance, int event) +{ + struct net_device *dev = dev_instance; + struct netdev_private *np = (struct netdev_private *)dev->priv; + long ioaddr = dev->base_addr; + + if (np->msg_level & NETIF_MSG_LINK) + printk(KERN_DEBUG "%s: Handling power event %d.\n", dev->name, event); + switch(event) { + case DRV_ATTACH: + MOD_INC_USE_COUNT; + break; + case DRV_SUSPEND: + /* Disable interrupts, stop Tx and Rx. */ + writew(0x0000, ioaddr + IntrEnable); + writew(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1); + break; + case DRV_RESUME: + sundance_start(dev); + break; + case DRV_DETACH: { + struct net_device **devp, **next; + if (dev->flags & IFF_UP) { + /* Some, but not all, kernel versions close automatically. */ + dev_close(dev); + dev->flags &= ~(IFF_UP|IFF_RUNNING); + } + unregister_netdev(dev); + release_region(dev->base_addr, pci_id_tbl[np->chip_id].io_size); +#ifndef USE_IO_OPS + iounmap((char *)dev->base_addr); +#endif + for (devp = &root_net_dev; *devp; devp = next) { + next = &((struct netdev_private *)(*devp)->priv)->next_module; + if (*devp == dev) { + *devp = *next; + break; + } + } + if (np->priv_addr) + kfree(np->priv_addr); + kfree(dev); + MOD_DEC_USE_COUNT; + break; + } + case DRV_PWR_WakeOn: + writeb(readb(ioaddr + WakeEvent) | 2, ioaddr + WakeEvent); + /* Fall through. */ + case DRV_PWR_DOWN: + case DRV_PWR_UP: + acpi_set_pwr_state(np->pci_dev, event==DRV_PWR_UP ? ACPI_D0:ACPI_D3); + break; + default: + return -1; + } + + return 0; +} + +static int netdev_close(struct net_device *dev) +{ + long ioaddr = dev->base_addr; + struct netdev_private *np = (struct netdev_private *)dev->priv; + int i; + + netif_stop_tx_queue(dev); + + if (np->msg_level & NETIF_MSG_IFDOWN) { + printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x " + "Rx %4.4x Int %2.2x.\n", + dev->name, (int)readw(ioaddr + TxStatus), + (int)readl(ioaddr + RxStatus), (int)readw(ioaddr + IntrStatus)); + printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", + dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx); + } + + /* Disable interrupts by clearing the interrupt mask. */ + writew(0x0000, ioaddr + IntrEnable); + + /* Stop the chip's Tx and Rx processes. */ + writew(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1); + + del_timer(&np->timer); + +#ifdef __i386__ + if (np->msg_level & NETIF_MSG_IFDOWN) { + printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n", + (int)virt_to_bus(np->tx_ring)); + for (i = 0; i < TX_RING_SIZE; i++) + printk(" #%d desc. %4.4x %8.8x %8.8x.\n", + i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr, + np->tx_ring[i].frag[0].length); + printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + (int)virt_to_bus(np->rx_ring)); + for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) { + printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", + i, np->rx_ring[i].status, np->rx_ring[i].frag[0].addr, + np->rx_ring[i].frag[0].length); + } + } +#endif /* __i386__ debugging only */ + + free_irq(dev->irq, dev); + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].status = 0; + np->rx_ring[i].frag[0].addr = 0xBADF00D0; /* An invalid address. */ + if (np->rx_skbuff[i]) { +#if LINUX_VERSION_CODE < 0x20100 + np->rx_skbuff[i]->free = 1; +#endif + dev_free_skb(np->rx_skbuff[i]); + } + np->rx_skbuff[i] = 0; + } + for (i = 0; i < TX_RING_SIZE; i++) { + if (np->tx_skbuff[i]) + dev_free_skb(np->tx_skbuff[i]); + np->tx_skbuff[i] = 0; + } + + MOD_DEC_USE_COUNT; + + return 0; +} + + +#ifdef MODULE +int init_module(void) +{ + if (debug >= NETIF_MSG_DRV) /* Emit version even if no cards detected. */ + printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2); + return pci_drv_register(&sundance_drv_id, NULL); +} + +void cleanup_module(void) +{ + struct net_device *next_dev; + + pci_drv_unregister(&sundance_drv_id); + + /* No need to check MOD_IN_USE, as sys_delete_module() checks. */ + while (root_net_dev) { + struct netdev_private *np = (void *)(root_net_dev->priv); + unregister_netdev(root_net_dev); +#ifdef USE_IO_OPS + release_region(root_net_dev->base_addr, + pci_id_tbl[np->chip_id].io_size); +#else + iounmap((char *)root_net_dev->base_addr); +#endif + next_dev = np->next_module; + if (np->priv_addr) + kfree(np->priv_addr); + kfree(root_net_dev); + root_net_dev = next_dev; + } +} + +#endif /* MODULE */ + +/* + * Local variables: + * compile-command: "make KERNVER=`uname -r` sundance.o" + * compile-cmd1: "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c sundance.c" + * simple-compile-command: "gcc -DMODULE -O6 -c sundance.c" + * c-indent-level: 4 + * c-basic-offset: 4 + * tab-width: 4 + * End: + */ |