diff options
Diffstat (limited to 'linux/src/drivers/net/3c59x.c')
-rw-r--r-- | linux/src/drivers/net/3c59x.c | 2040 |
1 files changed, 1236 insertions, 804 deletions
diff --git a/linux/src/drivers/net/3c59x.c b/linux/src/drivers/net/3c59x.c index da63188..a6b89cd 100644 --- a/linux/src/drivers/net/3c59x.c +++ b/linux/src/drivers/net/3c59x.c @@ -1,157 +1,181 @@ /* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */ /* - Written 1996-1999 by Donald Becker. + Written 1996-2003 by Donald Becker. - This software may be used and distributed according to the terms - of the GNU Public License, incorporated herein by reference. + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. This driver is for the 3Com "Vortex" and "Boomerang" series ethercards. Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597 and the EtherLink XL 3c900 and 3c905 cards. - The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O - Center of Excellence in Space Data and Information Sciences - Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771 + The original author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Support information and updates are available at + http://www.scyld.com/network/vortex.html */ -static char *version = -"3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html\n"; +static const char versionA[] = +"3c59x.c:v0.99Za 4/17/2003 Donald Becker, becker@scyld.com\n"; +static const char versionB[] = +" http://www.scyld.com/network/vortex.html\n"; + +/* The user-configurable values. + These may be modified when a driver module is loaded.*/ + +/* Message enable level: 0..31 = no..all messages. See NETIF_MSG docs. */ +static int debug = 2; + +/* This driver uses 'options' to pass the media type, full-duplex flag, etc. + See media_tbl[] and the web page for the possible types. + There is no limit on card count, MAX_UNITS limits only module options. */ +#define MAX_UNITS 8 +static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1,}; +static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static int max_interrupt_work = 20; -/* "Knobs" that adjust features and parameters. */ /* Set the copy breakpoint for the copy-only-tiny-frames scheme. Setting to > 1512 effectively disables this feature. */ static const int rx_copybreak = 200; -/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */ -static const int mtu = 1500; -/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ -static int max_interrupt_work = 20; -/* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */ -#define vortex_debug debug -#ifdef VORTEX_DEBUG -static int vortex_debug = VORTEX_DEBUG; -#else -static int vortex_debug = 1; -#endif +/* Allow setting MTU to a larger size, bypassing the normal Ethernet setup. */ +static const int mtu = 1500; -/* Some values here only for performance evaluation and path-coverage - debugging. */ -static int rx_nocopy = 0, rx_copy = 0, queued_packet = 0, rx_csumhits; +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + Cyclones and later have a 64 or 256 element hash table based on the + Ethernet CRC. */ +static int multicast_filter_limit = 64; + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + The compiler will convert <unsigned>'%'<2^N> into a bit mask. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + Do not increase the Tx ring beyond 256. + Large receive rings waste memory and confound network buffer limits. + These values have been carefully studied: changing these might mask a + problem, it won't fix it. + */ +#define TX_RING_SIZE 16 +#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#define RX_RING_SIZE 32 -/* A few values that may be tweaked. */ +/* Operational parameters that usually are not changed. */ /* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (2*HZ) +#define TX_TIMEOUT (6*HZ) -/* Keep the ring sizes a power of two for efficiency. */ -#define TX_RING_SIZE 16 -#define RX_RING_SIZE 32 -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ +/* Allocation size of Rx buffers with normal sized Ethernet frames. + Do not change this value without good reason. The 1536 value is not + a limit, or directly related to MTU, but rather a way to keep a + consistent allocation size among drivers. + */ +#define PKT_BUF_SZ 1536 -#ifndef __OPTIMIZE__ +#ifndef __KERNEL__ +#define __KERNEL__ +#endif +#if !defined(__OPTIMIZE__) #warning You must compile this file with the correct options! #warning See the last lines of the source file. #error You must compile this driver with "-O". #endif #include <linux/config.h> -#include <linux/version.h> -#ifdef MODULE -#ifdef MODVERSIONS -#include <linux/modversions.h> +#if defined(CONFIG_SMP) && ! defined(__SMP__) +#define __SMP__ +#endif +#if defined(MODULE) && defined(CONFIG_MODVERSIONS) && ! defined(MODVERSIONS) +#define MODVERSIONS #endif + +#include <linux/version.h> +#if LINUX_VERSION_CODE < 0x20300 && defined(MODVERSIONS) #include <linux/module.h> +#include <linux/modversions.h> #else -#define MOD_INC_USE_COUNT -#define MOD_DEC_USE_COUNT +#include <linux/modversions.h> +#include <linux/module.h> #endif #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/string.h> #include <linux/timer.h> #include <linux/errno.h> -#include <linux/in.h> #include <linux/ioport.h> +#if LINUX_VERSION_CODE >= 0x20400 +#include <linux/slab.h> +#else #include <linux/malloc.h> +#endif #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> -#if LINUX_VERSION_CODE < 0x20155 -#include <linux/bios32.h> -#endif -#include <asm/irq.h> /* For NR_IRQS only. */ +#include <asm/irq.h> +#include <asm/byteorder.h> #include <asm/bitops.h> #include <asm/io.h> -/* Kernel compatibility defines, some common to David Hinds' PCMCIA package. - This is only in the support-all-kernels source code. */ +#ifdef INLINE_PCISCAN +#include "k_compat.h" +#else +#include "pci-scan.h" +#include "kern_compat.h" +#endif -#define RUN_AT(x) (jiffies + (x)) +/* Condensed operations for readability. + Compatibility defines are now in kern_compat.h */ -#include <linux/delay.h> +#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr)) +#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr)) -#if (LINUX_VERSION_CODE >= 0x20100) +#if (LINUX_VERSION_CODE >= 0x20100) && defined(MODULE) char kernel_version[] = UTS_RELEASE; -#else -#ifndef __alpha__ -#define ioremap(a,b) \ - (((a)<0x100000) ? (void *)((u_long)(a)) : vremap(a,b)) -#define iounmap(v) \ - do { if ((u_long)(v) > 0x100000) vfree(v); } while (0) -#endif -#endif -#if LINUX_VERSION_CODE <= 0x20139 -#define net_device_stats enet_statistics -#define NETSTATS_VER2 -#endif -#if LINUX_VERSION_CODE < 0x20138 -#define test_and_set_bit(val, addr) set_bit(val, addr) -#define le32_to_cpu(val) (val) -#define cpu_to_le32(val) (val) -#endif -#if LINUX_VERSION_CODE < 0x20155 -#define PCI_SUPPORT_VER1 -#else -#define PCI_SUPPORT_VER2 -#endif -#if LINUX_VERSION_CODE < 0x20159 -#define DEV_FREE_SKB(skb) dev_kfree_skb (skb, FREE_WRITE); -#else /* Grrr, incompatible changes should change the name. */ -#define DEV_FREE_SKB(skb) dev_kfree_skb(skb); -#endif -#if ! defined(CAP_NET_ADMIN) -#define capable(CAP_XXX) (suser()) #endif -#if defined(MODULE) && LINUX_VERSION_CODE > 0x20115 -MODULE_AUTHOR("Donald Becker <becker@cesdis.gsfc.nasa.gov>"); -MODULE_DESCRIPTION("3Com 3c590/3c900 series Vortex/Boomerang driver"); +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("3Com EtherLink XL (3c590/3c900 series) driver"); +MODULE_LICENSE("GPL"); MODULE_PARM(debug, "i"); -MODULE_PARM(options, "1-" __MODULE_STRING(8) "i"); -MODULE_PARM(full_duplex, "1-" __MODULE_STRING(8) "i"); +MODULE_PARM(options, "1-" __MODULE_STRING(MAX_UNITS) "i"); +MODULE_PARM(full_duplex, "1-" __MODULE_STRING(MAX_UNITS) "i"); MODULE_PARM(rx_copybreak, "i"); MODULE_PARM(max_interrupt_work, "i"); -MODULE_PARM(compaq_ioaddr, "i"); -MODULE_PARM(compaq_irq, "i"); -MODULE_PARM(compaq_device_id, "i"); +MODULE_PARM(multicast_filter_limit, "i"); +#ifdef MODULE_PARM_DESC +MODULE_PARM_DESC(debug, "3c59x message level (0-31)"); +MODULE_PARM_DESC(options, "3c59x force fixed media type"); +MODULE_PARM_DESC(full_duplex, + "3c59x set to 1 to force full duplex (deprecated)"); +MODULE_PARM_DESC(rx_copybreak, + "3c59x copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(max_interrupt_work, + "3c59x maximum events handled per interrupt"); +MODULE_PARM_DESC(multicast_filter_limit, + "Multicast address count before switching to Rx-all-multicast"); #endif /* Operational parameter that usually are not changed. */ -/* The Vortex size is twice that of the original EtherLinkIII series: the - runtime register window, window 1, is now always mapped in. - The Boomerang size is twice as large as the Vortex -- it has additional - bus master control registers. */ -#define VORTEX_TOTAL_SIZE 0x20 -#define BOOMERANG_TOTAL_SIZE 0x40 - /* Set iff a MII transceiver on any interface requires mdio preamble. This only set with the original DP83840 on older 3c905 boards, so the extra code size of a per-interface flag is not worthwhile. */ static char mii_preamble_required = 0; +/* Performance and path-coverage information. */ +static int rx_nocopy = 0, rx_copy = 0, queued_packet = 0, rx_csumhits; + /* Theory of Operation @@ -160,11 +184,10 @@ I. Board Compatibility This device driver is designed for the 3Com FastEtherLink and FastEtherLink XL, 3Com's PCI to 10/100baseT adapters. It also works with the 10Mbs versions of the FastEtherLink cards. The supported product IDs are - 3c590, 3c592, 3c595, 3c597, 3c900, 3c905 +in the pci_tbl[] list. The related ISA 3c515 is supported with a separate driver, 3c515.c, included -with the kernel source or available from - cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html +with the kernel source. II. Board-specific settings @@ -224,83 +247,152 @@ The name "Vortex" is the internal 3Com project name for the PCI ASIC, and the EISA version is called "Demon". According to Terry these names come from rides at the local amusement park. -The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes! -This driver only supports ethernet packets because of the skbuff allocation -limit of 4K. +The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes. +This driver only supports ethernet packets on some kernels because of the +skbuff allocation limit of 4K. */ -/* This table drives the PCI probe routines. It's mostly boilerplate in all - of the drivers, and will likely be provided by some future kernel. -*/ -enum pci_flags_bit { - PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, - PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3, -}; -struct pci_id_info { - const char *name; - u16 vendor_id, device_id, device_id_mask, flags; - int drv_flags, io_size; - struct device *(*probe1)(int pci_bus, int pci_devfn, struct device *dev, - long ioaddr, int irq, int chip_idx, int fnd_cnt); +/* The Vortex size is twice that of the original EtherLinkIII series: the + runtime register window, window 1, is now always mapped in. + The Boomerang size is twice as large as the Vortex -- it has additional + bus master control registers. */ +#define VORTEX_SIZE 0x20 +#define BOOMERANG_SIZE 0x40 +#define CYCLONE_SIZE 0x80 +enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=0x804, IS_TORNADO=0x08, + HAS_PWR_CTRL=0x10, HAS_MII=0x20, HAS_NWAY=0x40, HAS_CB_FNS=0x80, + EEPROM_8BIT=0x200, INVERT_LED_PWR=0x400, MII_XCVR_PWR=0x4000, + HAS_V2_TX=0x800, WN0_XCVR_PWR=0x1000, }; +/* Base feature sets for the generations. */ +#define FEATURE_BOOMERANG (HAS_MII) /* 905 */ +#define FEATURE_CYCLONE (IS_CYCLONE|HAS_V2_TX) /* 905B */ +#define FEATURE_TORNADO (IS_TORNADO|HAS_NWAY|HAS_V2_TX) /* 905C */ + +static void *vortex_probe1(struct pci_dev *pdev, void *init_dev, + long ioaddr, int irq, int chip_idx, int find_cnt); +static int pwr_event(void *dev_instance, int event); +#ifdef USE_MEM_OPS +#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1) +#else +#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_IO | PCI_ADDR0) +#endif -enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, - HAS_PWR_CTRL=0x10, HAS_MII=0x20, HAS_NWAY=0x40, HAS_CB_FNS=0x80, }; -static struct device *vortex_probe1(int pci_bus, int pci_devfn, - struct device *dev, long ioaddr, - int irq, int dev_id, int card_idx); static struct pci_id_info pci_tbl[] = { - {"3c590 Vortex 10Mbps", 0x10B7, 0x5900, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, vortex_probe1}, - {"3c595 Vortex 100baseTx", 0x10B7, 0x5950, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, vortex_probe1}, - {"3c595 Vortex 100baseT4", 0x10B7, 0x5951, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, vortex_probe1}, - {"3c595 Vortex 100base-MII", 0x10B7, 0x5952, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_VORTEX, 32, vortex_probe1}, - {"3Com Vortex", 0x10B7, 0x5900, 0xff00, - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG, 64, vortex_probe1}, - {"3c900 Boomerang 10baseT", 0x10B7, 0x9000, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG, 64, vortex_probe1}, - {"3c900 Boomerang 10Mbps Combo", 0x10B7, 0x9001, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG, 64, vortex_probe1}, - {"3c900 Cyclone 10Mbps Combo", 0x10B7, 0x9005, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE, 128, vortex_probe1}, - {"3c900B-FL Cyclone 10base-FL", 0x10B7, 0x900A, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE, 128, vortex_probe1}, - {"3c905 Boomerang 100baseTx", 0x10B7, 0x9050, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII, 64, vortex_probe1}, - {"3c905 Boomerang 100baseT4", 0x10B7, 0x9051, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII, 64, vortex_probe1}, - {"3c905B Cyclone 100baseTx", 0x10B7, 0x9055, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY, 128, vortex_probe1}, - {"3c905B Cyclone 10/100/BNC", 0x10B7, 0x9058, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY, 128, vortex_probe1}, - {"3c905B-FX Cyclone 100baseFx", 0x10B7, 0x905A, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE, 128, vortex_probe1}, - {"3c905C Tornado", 0x10B7, 0x9200, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE, 128, vortex_probe1}, - {"3c980 Cyclone", 0x10B7, 0x9800, 0xfff0, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE, 128, vortex_probe1}, - {"3cSOHO100-TX Hurricane", 0x10B7, 0x7646, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE, 128, vortex_probe1}, - {"3c555 Laptop Hurricane", 0x10B7, 0x5055, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE, 128, vortex_probe1}, - {"3c575 Boomerang CardBus", 0x10B7, 0x5057, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII, 64, vortex_probe1}, - {"3CCFE575 Cyclone CardBus", 0x10B7, 0x5157, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS, - 128, vortex_probe1}, - {"3CCFE656 Cyclone CardBus", 0x10B7, 0x6560, 0xffff, - PCI_USES_IO|PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS, - 128, vortex_probe1}, - {"3c575 series CardBus (unknown version)", 0x10B7, 0x5057, 0xf0ff, - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG|HAS_MII, 64, vortex_probe1}, - {"3Com Boomerang (unknown version)", 0x10B7, 0x9000, 0xff00, - PCI_USES_IO|PCI_USES_MASTER, IS_BOOMERANG, 64, vortex_probe1}, + {"3c590 Vortex 10Mbps", { 0x590010B7, 0xffffffff }, + PCI_IOTYPE, VORTEX_SIZE, IS_VORTEX, }, + {"3c595 Vortex 100baseTx", { 0x595010B7, 0xffffffff }, + PCI_IOTYPE, VORTEX_SIZE, IS_VORTEX, }, + {"3c595 Vortex 100baseT4", { 0x595110B7, 0xffffffff }, + PCI_IOTYPE, VORTEX_SIZE, IS_VORTEX, }, + {"3c595 Vortex 100base-MII",{ 0x595210B7, 0xffffffff }, + PCI_IOTYPE, VORTEX_SIZE, IS_VORTEX, }, + /* Change EISA_scan if these move from index 4 and 5. */ + {"3c592 EISA Vortex", { 0x592010B7, 0xffffffff }, + PCI_IOTYPE, VORTEX_SIZE, IS_VORTEX, }, + {"3c597 EISA Vortex", { 0x597010B7, 0xffffffff }, + PCI_IOTYPE, VORTEX_SIZE, IS_VORTEX, }, + {"Vortex (unknown)", { 0x590010B7, 0xff00ffff }, + PCI_IOTYPE, VORTEX_SIZE, IS_VORTEX, }, + {"3c900 Boomerang 10baseT", { 0x900010B7, 0xffffffff }, + PCI_IOTYPE, BOOMERANG_SIZE, IS_BOOMERANG, }, + {"3c900 Boomerang 10Mbps Combo", { 0x900110B7, 0xffffffff }, + PCI_IOTYPE,BOOMERANG_SIZE, IS_BOOMERANG, }, + {"3c900 Cyclone 10Mbps TPO", { 0x900410B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, IS_CYCLONE, }, + {"3c900 Cyclone 10Mbps Combo", { 0x900510B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, IS_CYCLONE, }, + {"3c900 Cyclone 10Mbps TPC", { 0x900610B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, IS_CYCLONE, }, + {"3c900B-FL Cyclone 10base-FL",{ 0x900A10B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, IS_CYCLONE, }, + {"3c905 Boomerang 100baseTx",{ 0x905010B7, 0xffffffff }, + PCI_IOTYPE,BOOMERANG_SIZE, IS_BOOMERANG|HAS_MII, }, + {"3c905 Boomerang 100baseT4",{ 0x905110B7, 0xffffffff }, + PCI_IOTYPE,BOOMERANG_SIZE, IS_BOOMERANG|HAS_MII, }, + {"3c905B Cyclone 100baseTx",{ 0x905510B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, IS_CYCLONE|HAS_NWAY, }, + {"3c905B Cyclone 10/100/BNC",{ 0x905810B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, IS_CYCLONE|HAS_NWAY, }, + {"3c905B-FX Cyclone 100baseFx",{ 0x905A10B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, IS_CYCLONE, }, + {"3c905C Tornado",{ 0x920010B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_TORNADO, }, + {"3c920 Tornado",{ 0x920110B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_TORNADO, }, + {"3c920 series Tornado",{ 0x920010B7, 0xfff0ffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_TORNADO, }, + {"3c982 Server Tornado",{ 0x980510B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_TORNADO, }, + {"3c980 Cyclone",{ 0x980010B7, 0xfff0ffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_CYCLONE|HAS_NWAY, }, + {"3cSOHO100-TX Hurricane", { 0x764610B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_CYCLONE, }, + {"3c555 Laptop Hurricane", { 0x505510B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_CYCLONE, }, + {"3c556 Laptop Tornado",{ 0x605510B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_TORNADO|EEPROM_8BIT, }, + {"3c556 series Laptop Tornado",{ 0x605510B7, 0xf0ffffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_TORNADO|EEPROM_8BIT, }, + {"3c1556B-5 mini-PCI",{ 0x605610B7, 0xffffffff, 0x655610b7, 0xffffffff, }, + PCI_IOTYPE, CYCLONE_SIZE, + FEATURE_TORNADO|EEPROM_8BIT|INVERT_LED_PWR|WN0_XCVR_PWR, }, + {"3c1556B mini-PCI",{ 0x605610B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, + FEATURE_TORNADO|EEPROM_8BIT|HAS_CB_FNS|INVERT_LED_PWR|MII_XCVR_PWR, }, + {"3c1556B series mini-PCI",{ 0x605610B7, 0xf0ffffff }, + PCI_IOTYPE, CYCLONE_SIZE, + FEATURE_TORNADO|EEPROM_8BIT|HAS_CB_FNS|INVERT_LED_PWR|MII_XCVR_PWR, }, + {"3c575 Boomerang CardBus", { 0x505710B7, 0xffffffff }, + PCI_IOTYPE,BOOMERANG_SIZE, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, }, + {"3CCFE575BT Cyclone CardBus",{ 0x515710B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, + FEATURE_CYCLONE | HAS_CB_FNS | EEPROM_8BIT | INVERT_LED_PWR, }, + {"3CCFE575CT Tornado CardBus",{ 0x525710B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, + FEATURE_TORNADO|HAS_CB_FNS|EEPROM_8BIT|MII_XCVR_PWR, }, + {"3CCFE656 Cyclone CardBus",{ 0x656010B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, + IS_CYCLONE|HAS_NWAY|HAS_CB_FNS| INVERT_LED_PWR | MII_XCVR_PWR, }, + {"3CCFE656B Cyclone+Winmodem CardBus",{ 0x656210B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, + FEATURE_CYCLONE/*|HAS_NWAY*/ |HAS_CB_FNS|EEPROM_8BIT|INVERT_LED_PWR|MII_XCVR_PWR, }, + {"3CCFE656C Tornado+Winmodem CardBus",{ 0x656410B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, + (FEATURE_TORNADO & ~HAS_NWAY)|HAS_CB_FNS|EEPROM_8BIT | MII_XCVR_PWR, }, + {"3c450 HomePNA Tornado",{ 0x450010B7, 0xffffffff }, + PCI_IOTYPE, CYCLONE_SIZE, FEATURE_TORNADO, }, + {"3c575 series CardBus (unknown version)", {0x505710B7, 0xf0ffffff }, + PCI_IOTYPE, BOOMERANG_SIZE, IS_BOOMERANG|HAS_MII, }, + {"3Com Boomerang (unknown version)",{ 0x900010B7, 0xff00ffff }, + PCI_IOTYPE, BOOMERANG_SIZE, IS_BOOMERANG, }, {0,}, /* 0 terminated list. */ }; +struct drv_id_info vortex_drv_id = { + "vortex", PCI_HOTSWAP, PCI_CLASS_NETWORK_ETHERNET<<8, pci_tbl, + vortex_probe1, pwr_event }; + +/* This driver was written to use I/O operations. + However there are performance benefits to using memory operations, so + that mode is now an options. + Compiling for memory ops turns off EISA support. +*/ +#ifdef USE_MEM_OPS +#undef inb +#undef inw +#undef inl +#undef outb +#undef outw +#undef outl +#define inb readb +#define inw readw +#define inl readl +#define outb writeb +#define outw writew +#define outl writel +#endif + /* Operational definitions. These are not used by other compilation units and thus are not exported in a ".h" file. @@ -332,7 +424,9 @@ enum vortex_cmd { /* The SetRxFilter command accepts the following classes: */ enum RxFilter { - RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8, + RxMulticastHash = 0x10, +}; /* Bits in the general status register. */ enum vortex_status { @@ -356,11 +450,7 @@ enum Window0 { Wn0EepromData = 12, /* Window 0: EEPROM results register. */ IntrStatus=0x0E, /* Valid in all windows. */ }; -enum Win0_EEPROM_bits { - EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, - EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ - EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ -}; + /* EEPROM locations. */ enum eeprom_offset { PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3, @@ -372,34 +462,35 @@ enum Window2 { /* Window 2. */ Wn2_ResetOptions=12, }; enum Window3 { /* Window 3: MAC/config bits. */ - Wn3_Config=0, Wn3_MAC_Ctrl=6, Wn3_Options=8, -}; -union wn3_config { - int i; - struct w3_config_fields { - unsigned int ram_size:3, ram_width:1, ram_speed:2, rom_size:2; - int pad8:8; - unsigned int ram_split:2, pad18:2, xcvr:4, autoselect:1; - int pad24:7; - } u; + Wn3_Config=0, Wn3_MaxPktSize=4, Wn3_MAC_Ctrl=6, Wn3_Options=8, }; enum Window4 { /* Window 4: Xcvr/media bits. */ Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10, }; +enum Window5 { + Wn5_TxThreshold = 0, Wn5_RxFilter = 8, +}; enum Win4_Media_bits { Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ Media_LnkBeat = 0x0800, }; -enum Window7 { /* Window 7: Bus Master control. */ +enum Window7 { + /* Bus Master control on Vortex. */ Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12, + /* On Cyclone and later, VLAN and PowerMgt control. */ + Wn7_VLAN_Mask = 0, Wn7_VLAN_EtherType = 4, Wn7_PwrMgmtEvent = 12, }; -/* Boomerang bus master control registers. */ + +/* Boomerang and Cyclone bus master control registers. */ enum MasterCtrl { PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c, - TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38, + DownPollRate = 0x2d, TxFreeThreshold = 0x2f, + UpPktStatus = 0x30, UpListPtr = 0x38, + /* Cyclone+. */ + TxPktID=0x18, RxPriorityThresh = 0x3c, }; /* The Rx and Tx descriptor lists. @@ -429,14 +520,16 @@ struct boom_tx_desc { /* Values for the Tx status entry. */ enum tx_desc_status { - CRCDisable=0x2000, TxDComplete=0x8000, + CRCDisable=0x2000, TxIntrDnComplete=0x8000, TxDownComplete=0x10000, AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000, + TxNoRoundup=0x10000000, /* HAS_V2_TX should not word-pad packet. */ TxIntrUploaded=0x80000000, /* IRQ when in FIFO, but maybe not sent. */ }; /* Chip features we care about in vp->capabilities, read from the EEPROM. */ -enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 }; +enum ChipCaps { CapBusMaster=0x20, CapNoTxLength=0x0200, CapPwrMgmt=0x2000 }; +#define PRIV_ALIGN 15 /* Required alignment mask */ struct vortex_private { /* The Rx and Tx rings should be quad-word-aligned. */ struct boom_rx_desc rx_ring[RX_RING_SIZE]; @@ -444,32 +537,46 @@ struct vortex_private { /* The addresses of transmit- and receive-in-place skbuffs. */ struct sk_buff* rx_skbuff[RX_RING_SIZE]; struct sk_buff* tx_skbuff[TX_RING_SIZE]; - struct device *next_module; + struct net_device *next_module; void *priv_addr; - unsigned int cur_rx, cur_tx; /* The next free ring entry */ - unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ - struct net_device_stats stats; + /* Keep the Rx and Tx variables grouped on their own cache lines. */ + struct boom_rx_desc *rx_head_desc; + unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + int rx_copybreak; + + struct boom_tx_desc *tx_desc_tail; struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ + unsigned int cur_tx, dirty_tx; + unsigned int tx_full:1, restart_tx:1; - /* PCI configuration space information. */ - u8 pci_bus, pci_devfn; /* PCI bus location, for power management. */ + long last_reset; + spinlock_t window_lock; + struct net_device_stats stats; char *cb_fn_base; /* CardBus function status addr space. */ - int chip_id; + int msg_level; + int chip_id, drv_flags; + struct pci_dev *pci_dev; /* PCI configuration space information. */ /* The remainder are related to chip state, mostly media selection. */ - unsigned long in_interrupt; + int multicast_filter_limit; + u32 mc_filter[8]; + int max_interrupt_work; + int rx_mode; struct timer_list timer; /* Media selection timer. */ int options; /* User-settable misc. driver options. */ unsigned int media_override:4, /* Passed-in media type. */ default_media:4, /* Read from the EEPROM/Wn3_Config. */ - full_duplex:1, force_fd:1, autoselect:1, + full_duplex:1, medialock:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */ full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */ hw_csums:1, /* Has hardware checksums. */ - tx_full:1; + restore_intr_mask:1, + polling:1; u16 status_enable; u16 intr_enable; u16 available_media; /* From Wn3_Options. */ + u16 wn3_mac_ctrl; /* Current settings. */ u16 capabilities, info1, info2; /* Various, from EEPROM. */ u16 advertising; /* NWay media advertisement */ unsigned char phys[2]; /* MII device addresses. */ @@ -503,62 +610,60 @@ static struct media_table { { "Default", 0, 0xFF, XCVR_10baseT, 10000}, }; -#ifndef CARDBUS -static int vortex_scan(struct device *dev, struct pci_id_info pci_tbl[]); +#if ! defined(CARDBUS) && ! defined(USE_MEM_OPS) +static int eisa_scan(struct net_device *dev); #endif -static int vortex_open(struct device *dev); +static int vortex_open(struct net_device *dev); +static void set_media_type(struct net_device *dev); +static void activate_xcvr(struct net_device *dev); +static void start_operation(struct net_device *dev); +static void start_operation1(struct net_device *dev); static void mdio_sync(long ioaddr, int bits); static int mdio_read(long ioaddr, int phy_id, int location); static void mdio_write(long ioaddr, int phy_id, int location, int value); static void vortex_timer(unsigned long arg); -static int vortex_start_xmit(struct sk_buff *skb, struct device *dev); -static int boomerang_start_xmit(struct sk_buff *skb, struct device *dev); -static int vortex_rx(struct device *dev); -static int boomerang_rx(struct device *dev); +static void vortex_tx_timeout(struct net_device *dev); +static int vortex_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int vortex_rx(struct net_device *dev); +static int boomerang_rx(struct net_device *dev); static void vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static int vortex_close(struct device *dev); -static void update_stats(long ioaddr, struct device *dev); -static struct net_device_stats *vortex_get_stats(struct device *dev); -static void set_rx_mode(struct device *dev); -static int vortex_ioctl(struct device *dev, struct ifreq *rq, int cmd); -static void acpi_wake(int pci_bus, int pci_devfn); -static void acpi_set_WOL(struct device *dev); +static int vortex_close(struct net_device *dev); +static void update_stats(long ioaddr, struct net_device *dev); +static struct net_device_stats *vortex_get_stats(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +#if defined(NO_PCI) +#define acpi_set_WOL(dev) do {} while(0); +#define acpi_wake(pci_dev) do {} while(0); +#define acpi_set_pwr_state(pci_dev, state) do {} while(0); +#else +static void acpi_set_WOL(struct net_device *dev); +#endif -/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ -/* Option count limit only -- unlimited interfaces are supported. */ -#define MAX_UNITS 8 -static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1,}; -static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; /* A list of all installed Vortex devices, for removing the driver module. */ -static struct device *root_vortex_dev = NULL; +static struct net_device *root_vortex_dev = NULL; -#ifdef MODULE -#ifndef CARDBUS -/* Variables to work-around the Compaq PCI BIOS32 problem. */ -static int compaq_ioaddr = 0, compaq_irq = 0, compaq_device_id = 0x5900; -#endif -#ifdef CARDBUS +#if defined(MODULE) && defined(CARDBUS) #include <pcmcia/driver_ops.h> static dev_node_t *vortex_attach(dev_locator_t *loc) { - u16 dev_id, vendor_id; - u32 io; + u32 io, pci_id; u8 bus, devfn, irq; - struct device *dev; + struct net_device *dev; int chip_idx; if (loc->bus != LOC_PCI) return NULL; bus = loc->b.pci.bus; devfn = loc->b.pci.devfn; pcibios_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, &io); pcibios_read_config_byte(bus, devfn, PCI_INTERRUPT_LINE, &irq); - pcibios_read_config_word(bus, devfn, PCI_VENDOR_ID, &vendor_id); - pcibios_read_config_word(bus, devfn, PCI_DEVICE_ID, &dev_id); - printk(KERN_INFO "vortex_attach(bus %d, function %d, device %4.4x)\n", - bus, devfn, dev_id); + pcibios_read_config_dword(bus, devfn, PCI_VENDOR_ID, &pci_id); + printk(KERN_INFO "vortex_attach(bus %d, function %d, device %8.8x)\n", + bus, devfn, pci_id); io &= ~3; if (io == 0 || irq == 0) { printk(KERN_ERR "The 3Com CardBus Ethernet interface was not " @@ -566,17 +671,16 @@ static dev_node_t *vortex_attach(dev_locator_t *loc) io == 0 ? "I/O address" : "IRQ"); return NULL; } - for (chip_idx = 0; pci_tbl[chip_idx].vendor_id; chip_idx++) - if (vendor_id == pci_tbl[chip_idx].vendor_id - && (dev_id & pci_tbl[chip_idx].device_id_mask) == - pci_tbl[chip_idx].device_id) + for (chip_idx = 0; pci_tbl[chip_idx].id.pci; chip_idx++) + if ((pci_id & pci_tbl[chip_idx].id.pci_mask) == + pci_tbl[chip_idx].id.pci) break; - if (pci_tbl[chip_idx].vendor_id == 0) { /* Compiled out! */ - printk(KERN_INFO "Unable to match chip type %4.4x %4.4x in " - "vortex_attach().\n", vendor_id, dev_id); + if (pci_tbl[chip_idx].id.pci == 0) { /* Compiled out! */ + printk(KERN_INFO "Unable to match chip type %8.8x in " + "vortex_attach().\n", pci_id); return NULL; } - dev = vortex_probe1(bus, devfn, NULL, io, irq, chip_idx, MAX_UNITS+1); + dev = vortex_probe1(pci_find_slot(bus, devfn), NULL, io, irq, chip_idx, MAX_UNITS+1); if (dev) { dev_node_t *node = kmalloc(sizeof(dev_node_t), GFP_KERNEL); strcpy(node->dev_name, dev->name); @@ -590,17 +694,17 @@ static dev_node_t *vortex_attach(dev_locator_t *loc) static void vortex_detach(dev_node_t *node) { - struct device **devp, **next; - printk(KERN_INFO "vortex_detach(%s)\n", node->dev_name); + struct net_device **devp, **next; + printk(KERN_DEBUG "vortex_detach(%s)\n", node->dev_name); for (devp = &root_vortex_dev; *devp; devp = next) { next = &((struct vortex_private *)(*devp)->priv)->next_module; if (strcmp((*devp)->name, node->dev_name) == 0) break; } if (*devp) { - struct device *dev = *devp; + struct net_device *dev = *devp; struct vortex_private *vp = dev->priv; if (dev->flags & IFF_UP) - vortex_close(dev); + dev_close(dev); dev->flags &= ~(IFF_UP|IFF_RUNNING); unregister_netdev(dev); if (vp->cb_fn_base) iounmap(vp->cb_fn_base); @@ -616,143 +720,68 @@ struct driver_operations vortex_ops = { "3c575_cb", vortex_attach, NULL, NULL, vortex_detach }; -#endif /* Cardbus support */ +#endif /* Old-style Cardbus module support */ + +#if defined(MODULE) || (LINUX_VERSION_CODE >= 0x020400) +#if ! defined(MODULE) /* Must be a 2.4 kernel */ +module_init(init_module); +module_exit(cleanup_module); +#endif int init_module(void) { - if (vortex_debug) - printk(KERN_INFO "%s", version); + printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB); #ifdef CARDBUS register_driver(&vortex_ops); return 0; #else - return vortex_scan(0, pci_tbl); +#ifndef USE_MEM_OPS + /* This is not quite correct, but both EISA and PCI cards is unlikely. */ + if (eisa_scan(0) >= 0) + return 0; +#if defined(NO_PCI) + return 0; +#endif +#endif + + return pci_drv_register(&vortex_drv_id, NULL); #endif } #else -int tc59x_probe(struct device *dev) +int tc59x_probe(struct net_device *dev) { - static int did_version = -1; - if (++did_version <= 0) - printk(KERN_INFO "%s", version); - return vortex_scan(dev, pci_tbl); + int retval = -ENODEV; + + /* Allow an EISA-only driver. */ +#if ! defined(NO_PCI) + if (pci_drv_register(&vortex_drv_id, dev) >= 0) { + retval = 0; + dev = 0; + } +#endif +#ifndef USE_MEM_OPS + if (eisa_scan(dev) >= 0) + retval = 0; +#endif + if (retval >= 0) + printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB); + return retval; } #endif /* not MODULE */ -#ifndef CARDBUS -static int vortex_scan(struct device *dev, struct pci_id_info pci_tbl[]) +#if ! defined(CARDBUS) && ! defined(USE_MEM_OPS) +static int eisa_scan(struct net_device *dev) { int cards_found = 0; - /* Allow an EISA-only driver. */ -#if defined(CONFIG_PCI) || (defined(MODULE) && !defined(NO_PCI)) - /* Ideally we would detect all cards in slot order. That would - be best done a central PCI probe dispatch, which wouldn't work - well with the current structure. So instead we detect 3Com cards - in slot order. */ - if (pcibios_present()) { - static int pci_index = 0; - unsigned char pci_bus, pci_device_fn; - - for (;pci_index < 0xff; pci_index++) { - u16 vendor, device, pci_command, new_command; - int chip_idx, irq; - long ioaddr; - - if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8, pci_index, - &pci_bus, &pci_device_fn) - != PCIBIOS_SUCCESSFUL) - break; - pcibios_read_config_word(pci_bus, pci_device_fn, - PCI_VENDOR_ID, &vendor); - pcibios_read_config_word(pci_bus, pci_device_fn, - PCI_DEVICE_ID, &device); - for (chip_idx = 0; pci_tbl[chip_idx].vendor_id; chip_idx++) - if (vendor == pci_tbl[chip_idx].vendor_id - && (device & pci_tbl[chip_idx].device_id_mask) == - pci_tbl[chip_idx].device_id) - break; - if (pci_tbl[chip_idx].vendor_id == 0) /* Compiled out! */ - continue; - - /* The Cyclone requires config space re-write if powered down. */ - acpi_wake(pci_bus, pci_device_fn); - - { -#if LINUX_VERSION_CODE >= 0x20155 - struct pci_dev *pdev = pci_find_slot(pci_bus, pci_device_fn); - ioaddr = pdev->base_address[0] & ~3; - irq = pdev->irq; -#else - u32 pci_ioaddr; - u8 pci_irq_line; - pcibios_read_config_byte(pci_bus, pci_device_fn, - PCI_INTERRUPT_LINE, &pci_irq_line); - pcibios_read_config_dword(pci_bus, pci_device_fn, - PCI_BASE_ADDRESS_0, &pci_ioaddr); - ioaddr = pci_ioaddr & ~3;; - irq = pci_irq_line; -#endif - } - - if (ioaddr == 0) { - printk(KERN_WARNING " A 3Com network adapter has been found, " - "however it has not been assigned an I/O address.\n" - " You may need to power-cycle the machine for this " - "device to work!\n"); - continue; - } - - if (check_region(ioaddr, pci_tbl[chip_idx].io_size)) - continue; - - /* Activate the card. */ - pcibios_read_config_word(pci_bus, pci_device_fn, - PCI_COMMAND, &pci_command); - new_command = pci_command | PCI_COMMAND_MASTER|PCI_COMMAND_IO; - if (pci_command != new_command) { - printk(KERN_INFO " The PCI BIOS has not enabled the device " - "at %d/%d. Updating PCI command %4.4x->%4.4x.\n", - pci_bus, pci_device_fn, pci_command, new_command); - pcibios_write_config_word(pci_bus, pci_device_fn, - PCI_COMMAND, new_command); - } - - dev = vortex_probe1(pci_bus, pci_device_fn, dev, ioaddr, irq, - chip_idx, cards_found); - - if (dev) { - /* Get and check the latency values. On the 3c590 series - the latency timer must be set to the maximum value to avoid - data corruption that occurs when the timer expires during - a transfer -- a bug in the Vortex chip only. */ - u8 pci_latency; - u8 new_latency = (device & 0xff00) == 0x5900 ? 248 : 32; - - pcibios_read_config_byte(pci_bus, pci_device_fn, - PCI_LATENCY_TIMER, &pci_latency); - if (pci_latency < new_latency) { - printk(KERN_INFO "%s: Overriding PCI latency" - " timer (CFLT) setting of %d, new value is %d.\n", - dev->name, pci_latency, new_latency); - pcibios_write_config_byte(pci_bus, pci_device_fn, - PCI_LATENCY_TIMER, new_latency); - } - dev = 0; - cards_found++; - } - } - } -#endif /* NO_PCI */ - - /* Now check all slots of the EISA bus. */ + /* Check the slots of the EISA bus. */ if (EISA_bus) { static long ioaddr = 0x1000; for ( ; ioaddr < 0x9000; ioaddr += 0x1000) { int device_id; - if (check_region(ioaddr, VORTEX_TOTAL_SIZE)) + if (check_region(ioaddr, VORTEX_SIZE)) continue; /* Check the standard EISA ID register for an encoded '3Com'. */ if (inw(ioaddr + 0xC80) != 0x6d50) @@ -761,65 +790,100 @@ static int vortex_scan(struct device *dev, struct pci_id_info pci_tbl[]) device_id = (inb(ioaddr + 0xC82)<<8) + inb(ioaddr + 0xC83); if ((device_id & 0xFF00) != 0x5900) continue; - vortex_probe1(0, 0, dev, ioaddr, inw(ioaddr + 0xC88) >> 12, - 4, cards_found); + vortex_probe1(0, dev, ioaddr, inw(ioaddr + 0xC88) >> 12, + (device_id & 0xfff0) == 0x5970 ? 5 : 4, cards_found); dev = 0; cards_found++; } } -#ifdef MODULE - /* Special code to work-around the Compaq PCI BIOS32 problem. */ - if (compaq_ioaddr) { - vortex_probe1(0, 0, dev, compaq_ioaddr, compaq_irq, - compaq_device_id, cards_found++); - dev = 0; - } -#endif - return cards_found ? 0 : -ENODEV; } #endif /* ! Cardbus */ -static struct device *vortex_probe1(int pci_bus, int pci_devfn, - struct device *dev, long ioaddr, - int irq, int chip_idx, int card_idx) +static int do_eeprom_op(long ioaddr, int ee_cmd) +{ + int timer; + + outw(ee_cmd, ioaddr + Wn0EepromCmd); + /* Wait for the read to take place, worst-case 162 us. */ + for (timer = 1620; timer >= 0; timer--) { + if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0) + break; + } + return inw(ioaddr + Wn0EepromData); +} + +static void *vortex_probe1(struct pci_dev *pdev, void *init_dev, + long ioaddr, int irq, int chip_idx, int find_cnt) { + struct net_device *dev; struct vortex_private *vp; + void *priv_mem; int option; unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ + int ee_read_cmd; + int drv_flags = pci_tbl[chip_idx].drv_flags; int i; - dev = init_etherdev(dev, 0); + dev = init_etherdev(init_dev, 0); + if (!dev) + return NULL; + +#if ! defined(NO_PCI) + /* Check the PCI latency value. On the 3c590 series the latency timer + must be set to the maximum value to avoid data corruption that occurs + when the timer expires during a transfer. This bug exists the Vortex + chip only. */ + if (pdev) { + u8 pci_latency; + u8 new_latency = (drv_flags & IS_VORTEX) ? 248 : 32; + + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); + if (pci_latency < new_latency) { + printk(KERN_INFO "%s: Overriding PCI latency" + " timer (CFLT) setting of %d, new value is %d.\n", + dev->name, pci_latency, new_latency); + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency); + } + } +#endif printk(KERN_INFO "%s: 3Com %s at 0x%lx, ", dev->name, pci_tbl[chip_idx].name, ioaddr); + /* Make certain elements e.g. descriptor lists are aligned. */ + priv_mem = kmalloc(sizeof(*vp) + PRIV_ALIGN, GFP_KERNEL); + /* Check for the very unlikely case of no memory. */ + if (priv_mem == NULL) { + printk(" INTERFACE MEMORY ALLOCATION FAILURE.\n"); + return NULL; + } + dev->base_addr = ioaddr; dev->irq = irq; dev->mtu = mtu; - /* Make certain the descriptor lists are aligned. */ - { - void *mem = kmalloc(sizeof(*vp) + 15, GFP_KERNEL); - vp = (void *)(((long)mem + 15) & ~15); - vp->priv_addr = mem; - } + dev->priv = vp = (void *)(((long)priv_mem + PRIV_ALIGN) & ~PRIV_ALIGN); memset(vp, 0, sizeof(*vp)); - dev->priv = vp; + vp->priv_addr = priv_mem; vp->next_module = root_vortex_dev; root_vortex_dev = dev; vp->chip_id = chip_idx; - vp->pci_bus = pci_bus; - vp->pci_devfn = pci_devfn; + vp->pci_dev = pdev; + vp->drv_flags = drv_flags; + vp->msg_level = (1 << debug) - 1; + vp->rx_copybreak = rx_copybreak; + vp->max_interrupt_work = max_interrupt_work; + vp->multicast_filter_limit = multicast_filter_limit; /* The lower four bits are the media type. */ if (dev->mem_start) option = dev->mem_start; - else if (card_idx < MAX_UNITS) - option = options[card_idx]; + else if (find_cnt < MAX_UNITS) + option = options[find_cnt]; else option = -1; @@ -832,28 +896,30 @@ static struct device *vortex_probe1(int pci_bus, int pci_devfn, vp->full_duplex = 0; vp->bus_master = 0; } - if (card_idx < MAX_UNITS && full_duplex[card_idx] > 0) + if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0) vp->full_duplex = 1; - vp->force_fd = vp->full_duplex; vp->options = option; /* Read the station address from the EEPROM. */ EL3WINDOW(0); + /* Figure out the size and offset of the EEPROM table. + This is complicated by potential discontiguous address bits. */ + + /* Locate the opcode bits, 0xC0 or 0x300. */ + outw(0x5555, ioaddr + Wn0EepromData); + ee_read_cmd = do_eeprom_op(ioaddr, 0x80) == 0x5555 ? 0x200 : 0x80; + /* Locate the table base for CardBus cards. */ + if (do_eeprom_op(ioaddr, ee_read_cmd + 0x37) == 0x6d50) + ee_read_cmd += 0x30; + for (i = 0; i < 0x40; i++) { - int timer; -#ifdef CARDBUS - outw(0x230 + i, ioaddr + Wn0EepromCmd); -#else - outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd); -#endif - /* Pause for at least 162 us. for the read to take place. */ - for (timer = 10; timer >= 0; timer--) { - udelay(162); - if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0) - break; + int cmd_and_addr = ee_read_cmd + i; + if (ee_read_cmd == 0xB0) { /* Correct for discontinuity. */ + int offset = 0x30 + i; + cmd_and_addr = 0x80 + (offset & 0x3f) + ((offset<<2) & 0x0f00); } - eeprom[i] = inw(ioaddr + Wn0EepromData); + eeprom[i] = do_eeprom_op(ioaddr, cmd_and_addr); } for (i = 0; i < 0x18; i++) checksum ^= eeprom[i]; @@ -863,7 +929,7 @@ static struct device *vortex_probe1(int pci_bus, int pci_devfn, checksum ^= eeprom[i++]; checksum = (checksum ^ (checksum >> 8)) & 0xff; } - if (checksum != 0x00) + if (checksum != 0x00 && !(drv_flags & IS_TORNADO)) printk(" ***INVALID CHECKSUM %4.4x*** ", checksum); for (i = 0; i < 3; i++) @@ -874,27 +940,22 @@ static struct device *vortex_probe1(int pci_bus, int pci_devfn, for (i = 0; i < 6; i++) outb(dev->dev_addr[i], ioaddr + i); -#ifdef __sparc__ - printk(", IRQ %s\n", __irq_itoa(dev->irq)); -#else printk(", IRQ %d\n", dev->irq); /* Tell them about an invalid IRQ. */ - if (vortex_debug && (dev->irq <= 0 || dev->irq >= NR_IRQS)) + if (dev->irq <= 0) printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n", dev->irq); -#endif - if (pci_tbl[vp->chip_id].drv_flags & HAS_CB_FNS) { +#if ! defined(NO_PCI) + if (drv_flags & HAS_CB_FNS) { u32 fn_st_addr; /* Cardbus function status space */ - pcibios_read_config_dword(pci_bus, pci_devfn, PCI_BASE_ADDRESS_2, - &fn_st_addr); + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_2, &fn_st_addr); if (fn_st_addr) vp->cb_fn_base = ioremap(fn_st_addr & ~3, 128); - printk("%s: CardBus functions mapped %8.8x->%p (PCMCIA committee" - " brain-damage).\n", dev->name, fn_st_addr, vp->cb_fn_base); - EL3WINDOW(2); - outw(0x10 | inw(ioaddr + Wn2_ResetOptions), ioaddr + Wn2_ResetOptions); + printk(KERN_INFO "%s: CardBus functions mapped %8.8x->%p.\n", + dev->name, fn_st_addr, vp->cb_fn_base); } +#endif /* Extract our information from the EEPROM data. */ vp->info1 = eeprom[13]; @@ -903,27 +964,31 @@ static struct device *vortex_probe1(int pci_bus, int pci_devfn, if (vp->info1 & 0x8000) vp->full_duplex = 1; + if (vp->full_duplex) + vp->medialock = 1; + + /* Turn on the transceiver. */ + activate_xcvr(dev); { char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; - union wn3_config config; + int i_cfg; EL3WINDOW(3); vp->available_media = inw(ioaddr + Wn3_Options); if ((vp->available_media & 0xff) == 0) /* Broken 3c916 */ vp->available_media = 0x40; - config.i = inl(ioaddr + Wn3_Config); - if (vortex_debug > 1) - printk(KERN_DEBUG " Internal config register is %4.4x, " - "transceivers %#x.\n", config.i, inw(ioaddr + Wn3_Options)); - printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", - 8 << config.u.ram_size, - config.u.ram_width ? "word" : "byte", - ram_split[config.u.ram_split], - config.u.autoselect ? "autoselect/" : "", - config.u.xcvr > XCVR_ExtMII ? "<invalid transceiver>" : - media_tbl[config.u.xcvr].name); - vp->default_media = config.u.xcvr; - vp->autoselect = config.u.autoselect; + i_cfg = inl(ioaddr + Wn3_Config); /* Internal Configuration */ + vp->default_media = (i_cfg >> 20) & 15; + if (vp->msg_level & NETIF_MSG_LINK) + printk(KERN_DEBUG " Internal config register is %8.8x, " + "transceivers %#x.\n", i_cfg, inw(ioaddr + Wn3_Options)); + printk(KERN_INFO " %dK buffer %s Rx:Tx split, %s%s interface.\n", + 8 << (i_cfg & 7), + ram_split[(i_cfg >> 16) & 3], + i_cfg & 0x01000000 ? "autoselect/" : "", + vp->default_media > XCVR_ExtMII ? "<invalid transceiver>" : + media_tbl[vp->default_media].name); + vp->autoselect = i_cfg & 0x01000000 ? 1 : 0; } if (vp->media_override != 7) { @@ -933,16 +998,17 @@ static struct device *vortex_probe1(int pci_bus, int pci_devfn, } else dev->if_port = vp->default_media; - if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { + if ((vp->available_media & 0x41) || (drv_flags & HAS_NWAY) || + dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { int phy, phy_idx = 0; EL3WINDOW(4); mii_preamble_required++; - mii_preamble_required++; + mdio_sync(ioaddr, 32); mdio_read(ioaddr, 24, 1); for (phy = 1; phy <= 32 && phy_idx < sizeof(vp->phys); phy++) { int mii_status, phyx = phy & 0x1f; mii_status = mdio_read(ioaddr, phyx, 1); - if (mii_status && mii_status != 0xffff) { + if ((mii_status & 0xf800) && mii_status != 0xffff) { vp->phys[phy_idx++] = phyx; printk(KERN_INFO " MII transceiver found at address %d," " status %4x.\n", phyx, mii_status); @@ -955,6 +1021,12 @@ static struct device *vortex_probe1(int pci_bus, int pci_devfn, printk(KERN_WARNING" ***WARNING*** No MII transceivers found!\n"); vp->phys[0] = 24; } else { + if (mii_preamble_required == 0 && + mdio_read(ioaddr, vp->phys[0], 1) == 0) { + printk(KERN_INFO "%s: MII transceiver has preamble bug.\n", + dev->name); + mii_preamble_required = 1; + } vp->advertising = mdio_read(ioaddr, vp->phys[0], 4); if (vp->full_duplex) { /* Only advertise the FD media types. */ @@ -962,14 +1034,14 @@ static struct device *vortex_probe1(int pci_bus, int pci_devfn, mdio_write(ioaddr, vp->phys[0], 4, vp->advertising); } } + } else { + /* We will emulate MII management. */ + vp->phys[0] = 32; } - if (vp->capabilities & CapPwrMgmt) - acpi_set_WOL(dev); - if (vp->capabilities & CapBusMaster) { vp->full_bus_master_tx = 1; - printk(KERN_INFO" Enabling bus-master transmits and %s receives.\n", + printk(KERN_INFO" Using bus-master transmits and %s receives.\n", (vp->info2 & 1) ? "early" : "whole-frame" ); vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2; } @@ -989,29 +1061,27 @@ static struct device *vortex_probe1(int pci_bus, int pci_devfn, } -static int -vortex_open(struct device *dev) +static int vortex_open(struct net_device *dev) { - long ioaddr = dev->base_addr; struct vortex_private *vp = (struct vortex_private *)dev->priv; - union wn3_config config; + long ioaddr = dev->base_addr; int i; - /* Should be if(HAS_ACPI) */ - acpi_wake(vp->pci_bus, vp->pci_devfn); + MOD_INC_USE_COUNT; - /* Before initializing select the active media port. */ - EL3WINDOW(3); - config.i = inl(ioaddr + Wn3_Config); + acpi_wake(vp->pci_dev); + vp->window_lock = SPIN_LOCK_UNLOCKED; + activate_xcvr(dev); + /* Before initializing select the active media port. */ if (vp->media_override != 7) { - if (vortex_debug > 1) + if (vp->msg_level & NETIF_MSG_LINK) printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n", dev->name, vp->media_override, media_tbl[vp->media_override].name); dev->if_port = vp->media_override; } else if (vp->autoselect) { - if (pci_tbl[vp->chip_id].drv_flags & HAS_NWAY) + if (vp->drv_flags & HAS_NWAY) dev->if_port = XCVR_NWAY; else { /* Find first available media type, starting with 100baseTx. */ @@ -1022,88 +1092,39 @@ vortex_open(struct device *dev) } else dev->if_port = vp->default_media; - init_timer(&vp->timer); - vp->timer.expires = RUN_AT(media_tbl[dev->if_port].wait); - vp->timer.data = (unsigned long)dev; - vp->timer.function = &vortex_timer; /* timer handler */ - add_timer(&vp->timer); - - if (vortex_debug > 1) - printk(KERN_DEBUG "%s: Initial media type %s.\n", - dev->name, media_tbl[dev->if_port].name); - - vp->full_duplex = vp->force_fd; - config.u.xcvr = dev->if_port; - if ( ! (pci_tbl[vp->chip_id].drv_flags & HAS_NWAY)) - outl(config.i, ioaddr + Wn3_Config); - - if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { - int mii_reg1, mii_reg5; - EL3WINDOW(4); - /* Read BMSR (reg1) only to clear old status. */ - mii_reg1 = mdio_read(ioaddr, vp->phys[0], 1); - mii_reg5 = mdio_read(ioaddr, vp->phys[0], 5); - if (mii_reg5 == 0xffff || mii_reg5 == 0x0000) - ; /* No MII device or no link partner report */ - else if ((mii_reg5 & 0x0100) != 0 /* 100baseTx-FD */ - || (mii_reg5 & 0x00C0) == 0x0040) /* 10T-FD, but not 100-HD */ - vp->full_duplex = 1; - if (vortex_debug > 1) - printk(KERN_INFO "%s: MII #%d status %4.4x, link partner capability %4.4x," - " setting %s-duplex.\n", dev->name, vp->phys[0], - mii_reg1, mii_reg5, vp->full_duplex ? "full" : "half"); - EL3WINDOW(3); - } - - /* Set the full-duplex bit. */ - outb(((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) | - (dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl); - - if (vortex_debug > 1) { - printk(KERN_DEBUG "%s: vortex_open() InternalConfig %8.8x.\n", - dev->name, config.i); - } + if (! vp->medialock) + vp->full_duplex = 0; - outw(TxReset, ioaddr + EL3_CMD); - for (i = 2000; i >= 0 ; i--) - if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) - break; + vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete| + (vp->full_bus_master_tx ? DownComplete : TxAvailable) | + (vp->full_bus_master_rx ? UpComplete : RxComplete) | + (vp->bus_master ? DMADone : 0); + vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable | RxComplete | + StatsFull | HostError | TxComplete | IntReq + | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete; - outw(RxReset, ioaddr + EL3_CMD); - /* Wait a few ticks for the RxReset command to complete. */ - for (i = 2000; i >= 0 ; i--) - if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) - break; + if (vp->msg_level & NETIF_MSG_LINK) + printk(KERN_DEBUG "%s: Initial media type %s %s-duplex.\n", + dev->name, media_tbl[dev->if_port].name, + vp->full_duplex ? "full":"half"); - outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + set_media_type(dev); + start_operation(dev); /* Use the now-standard shared IRQ implementation. */ if (request_irq(dev->irq, &vortex_interrupt, SA_SHIRQ, dev->name, dev)) { + MOD_DEC_USE_COUNT; return -EAGAIN; } - if (vortex_debug > 1) { + spin_lock(&vp->window_lock); + + if (vp->msg_level & NETIF_MSG_IFUP) { EL3WINDOW(4); printk(KERN_DEBUG "%s: vortex_open() irq %d media status %4.4x.\n", dev->name, dev->irq, inw(ioaddr + Wn4_Media)); } - /* Set the station address and mask in window 2 each time opened. */ - EL3WINDOW(2); - for (i = 0; i < 6; i++) - outb(dev->dev_addr[i], ioaddr + i); - for (; i < 12; i+=2) - outw(0, ioaddr + i); - - if (dev->if_port == XCVR_10base2) - /* Start the thinnet transceiver. We should really wait 50ms...*/ - outw(StartCoax, ioaddr + EL3_CMD); - if (dev->if_port != XCVR_NWAY) { - EL3WINDOW(4); - outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) | - media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); - } - /* Switch to the stats window, and clear all stats by reading. */ outw(StatsDisable, ioaddr + EL3_CMD); EL3WINDOW(6); @@ -1119,63 +1140,226 @@ vortex_open(struct device *dev) /* Switch to register set 7 for normal use. */ EL3WINDOW(7); +#if defined(CONFIG_VLAN) + /* If this value is set no MTU adjustment is needed for 802.1Q. */ + outw(0x8100, ioaddr + Wn7_VLAN_EtherType); +#endif + spin_unlock(&vp->window_lock); if (vp->full_bus_master_rx) { /* Boomerang bus master. */ vp->cur_rx = vp->dirty_rx = 0; + /* Use 1518/+18 if the CRC is transferred. */ + vp->rx_buf_sz = dev->mtu + 14; + if (vp->rx_buf_sz < PKT_BUF_SZ) + vp->rx_buf_sz = PKT_BUF_SZ; + /* Initialize the RxEarly register as recommended. */ outw(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD); outl(0x0020, ioaddr + PktStatus); - if (vortex_debug > 2) - printk(KERN_DEBUG "%s: Filling in the Rx ring.\n", dev->name); for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb; - vp->rx_ring[i].next = cpu_to_le32(virt_to_bus(&vp->rx_ring[i+1])); - vp->rx_ring[i].status = 0; /* Clear complete bit. */ - vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG); - skb = dev_alloc_skb(PKT_BUF_SZ); + vp->rx_ring[i].length = cpu_to_le32(vp->rx_buf_sz | LAST_FRAG); + vp->rx_ring[i].status = 0; + vp->rx_ring[i].next = virt_to_le32desc(&vp->rx_ring[i+1]); + vp->rx_skbuff[i] = 0; + } + /* Wrap the ring. */ + vp->rx_head_desc = &vp->rx_ring[0]; + vp->rx_ring[i-1].next = virt_to_le32desc(&vp->rx_ring[0]); + + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = dev_alloc_skb(vp->rx_buf_sz); vp->rx_skbuff[i] = skb; if (skb == NULL) break; /* Bad news! */ skb->dev = dev; /* Mark as being used by this device. */ -#if LINUX_VERSION_CODE >= 0x10300 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ - vp->rx_ring[i].addr = cpu_to_le32(virt_to_bus(skb->tail)); -#else - vp->rx_ring[i].addr = virt_to_bus(skb->data); -#endif + vp->rx_ring[i].addr = virt_to_le32desc(skb->tail); } - /* Wrap the ring. */ - vp->rx_ring[i-1].next = cpu_to_le32(virt_to_bus(&vp->rx_ring[0])); - outl(virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr); + outl(virt_to_bus(vp->rx_head_desc), ioaddr + UpListPtr); } if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ dev->hard_start_xmit = &boomerang_start_xmit; vp->cur_tx = vp->dirty_tx = 0; - outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */ + vp->tx_desc_tail = &vp->tx_ring[TX_RING_SIZE - 1]; + if (vp->drv_flags & IS_BOOMERANG) { + /* Room for a packet, to avoid long DownStall delays. */ + outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); + } else if (vp->drv_flags & HAS_V2_TX) + outb(20, ioaddr + DownPollRate); + /* Clear the Tx ring. */ for (i = 0; i < TX_RING_SIZE; i++) vp->tx_skbuff[i] = 0; outl(0, ioaddr + DownListPtr); + vp->tx_full = 0; + vp->restart_tx = 1; } - /* Set reciever mode: presumably accept b-case and phys addr only. */ + /* The multicast filter is an ill-considered, write-only design. + The semantics are not documented, so we assume but do not rely + on the table being cleared with an RxReset. + Here we do an explicit clear of the largest known table. + */ + if (vp->drv_flags & HAS_V2_TX) + for (i = 0; i < 0x100; i++) + outw(SetFilterBit | i, ioaddr + EL3_CMD); + memset(vp->mc_filter, 0, sizeof vp->mc_filter); + + /* Set receiver mode: presumably accept b-case and phys addr only. */ + vp->rx_mode = 0; set_rx_mode(dev); - outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ - vp->in_interrupt = 0; - dev->tbusy = 0; - dev->interrupt = 0; - dev->start = 1; + start_operation1(dev); + + init_timer(&vp->timer); + vp->timer.expires = jiffies + media_tbl[dev->if_port].wait; + vp->timer.data = (unsigned long)dev; + vp->timer.function = &vortex_timer; /* timer handler */ + add_timer(&vp->timer); + + return 0; +} + +static void set_media_type(struct net_device *dev) +{ + struct vortex_private *vp = (struct vortex_private *)dev->priv; + long ioaddr = dev->base_addr; + int i_cfg; + + EL3WINDOW(3); + i_cfg = inl(ioaddr + Wn3_Config); + i_cfg &= ~0x00f00000; + if (vp->drv_flags & HAS_NWAY) + outl(i_cfg | 0x00800000, ioaddr + Wn3_Config); + else + outl(i_cfg | (dev->if_port << 20), ioaddr + Wn3_Config); + + if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { + int mii_reg1, mii_reg5; + EL3WINDOW(4); + /* Read BMSR (reg1) only to clear old status. */ + mii_reg1 = mdio_read(ioaddr, vp->phys[0], 1); + mii_reg5 = mdio_read(ioaddr, vp->phys[0], 5); + if (mii_reg5 == 0xffff || mii_reg5 == 0x0000) + ; /* No MII device or no link partner report */ + else if ((mii_reg5 & 0x0100) != 0 /* 100baseTx-FD */ + || (mii_reg5 & 0x00C0) == 0x0040) /* 10T-FD, but not 100-HD */ + vp->full_duplex = 1; + if (vp->msg_level & NETIF_MSG_LINK) + printk(KERN_INFO "%s: MII #%d status %4.4x, link partner capability %4.4x," + " setting %s-duplex.\n", dev->name, vp->phys[0], + mii_reg1, mii_reg5, vp->full_duplex ? "full" : "half"); + EL3WINDOW(3); + } + if (dev->if_port == XCVR_10base2) + /* Start the thinnet transceiver. We should really wait 50ms...*/ + outw(StartCoax, ioaddr + EL3_CMD); + EL3WINDOW(4); + if (dev->if_port != XCVR_NWAY) { + outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) | + media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); + } + /* Do we require link beat to transmit? */ + if (vp->info1 & 0x4000) + outw(inw(ioaddr + Wn4_Media) & ~Media_Lnk, ioaddr + Wn4_Media); + + /* Set the full-duplex and oversized frame bits. */ + EL3WINDOW(3); + + vp->wn3_mac_ctrl = vp->full_duplex ? 0x0120 : 0; + if (dev->mtu > 1500) + vp->wn3_mac_ctrl |= (dev->mtu == 1504 ? 0x0400 : 0x0040); + outb(vp->wn3_mac_ctrl, ioaddr + Wn3_MAC_Ctrl); + + if (vp->drv_flags & HAS_V2_TX) + outw(dev->mtu + 14, ioaddr + Wn3_MaxPktSize); +} + +static void activate_xcvr(struct net_device *dev) +{ + struct vortex_private *vp = (struct vortex_private *)dev->priv; + long ioaddr = dev->base_addr; + int reset_opts; + + /* Correct some magic bits. */ + EL3WINDOW(2); + reset_opts = inw(ioaddr + Wn2_ResetOptions); + if (vp->drv_flags & INVERT_LED_PWR) + reset_opts |= 0x0010; + if (vp->drv_flags & MII_XCVR_PWR) + reset_opts |= 0x4000; + outw(reset_opts, ioaddr + Wn2_ResetOptions); + if (vp->drv_flags & WN0_XCVR_PWR) { + EL3WINDOW(0); + outw(0x0900, ioaddr); + } +} + +static void start_operation(struct net_device *dev) +{ + struct vortex_private *vp = (struct vortex_private *)dev->priv; + long ioaddr = dev->base_addr; + int i; + + outw(TxReset, ioaddr + EL3_CMD); + for (i = 2000; i >= 0 ; i--) + if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + + outw(RxReset | 0x04, ioaddr + EL3_CMD); + /* Assume this cleared the filter. */ + memset(vp->mc_filter, 0, sizeof vp->mc_filter); + + /* Wait a few ticks for the RxReset command to complete. */ + for (i = 0; i < 200000; i++) + if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + if (i >= 200 && (vp->msg_level & NETIF_MSG_DRV)) + printk(KERN_DEBUG "%s: Rx Reset took an unexpectedly long time" + " to finish, %d ticks.\n", + dev->name, i); + + outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + /* Handle VLANs and jumbo frames. */ + if ((vp->drv_flags & HAS_V2_TX) && dev->mtu > 1500) { + EL3WINDOW(3); + outw(dev->mtu + 14, ioaddr + Wn3_MaxPktSize); + if (dev->mtu > 2033) { + outl(inl(ioaddr + Wn3_Config) | 0x0000C000, ioaddr + Wn3_Config); + outw(SetTxStart + (2000>>2), ioaddr + EL3_CMD); + } + } + /* Reset the station address and mask. */ + EL3WINDOW(2); + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + i); + for (; i < 12; i+=2) + outw(0, ioaddr + i); + if (vp->drv_flags & IS_BOOMERANG) { + /* Room for a packet, to avoid long DownStall delays. */ + outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); + } else if (vp->drv_flags & HAS_V2_TX) { + outb(20, ioaddr + DownPollRate); + vp->restart_tx = 1; + } +} +static void start_operation1(struct net_device *dev) +{ + struct vortex_private *vp = (struct vortex_private *)dev->priv; + long ioaddr = dev->base_addr; + + if (vp->full_bus_master_rx) { /* post-Vortex bus master. */ + /* Initialize the RxEarly register as recommended. */ + outw(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD); + outl(0x0020, ioaddr + PktStatus); + outl(virt_to_bus(&vp->rx_ring[vp->cur_rx % RX_RING_SIZE]), + ioaddr + UpListPtr); + } + + outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ /* Allow status bits to be seen. */ - vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete| - (vp->full_bus_master_tx ? DownComplete : TxAvailable) | - (vp->full_bus_master_rx ? UpComplete : RxComplete) | - (vp->bus_master ? DMADone : 0); - vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable | RxComplete | - StatsFull | HostError | TxComplete | IntReq - | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete; outw(vp->status_enable, ioaddr + EL3_CMD); /* Ack all pending events, and set active indicator mask. */ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, @@ -1183,24 +1367,47 @@ vortex_open(struct device *dev) outw(vp->intr_enable, ioaddr + EL3_CMD); if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ writel(0x8000, vp->cb_fn_base + 4); - - MOD_INC_USE_COUNT; - - return 0; + netif_start_tx_queue(dev); } static void vortex_timer(unsigned long data) { - struct device *dev = (struct device *)data; + struct net_device *dev = (struct net_device *)data; struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; int next_tick = 60*HZ; int ok = 0; - int media_status, mii_status, old_window; - - if (vortex_debug > 1) - printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n", - dev->name, media_tbl[dev->if_port].name); + int media_status, old_window; + + if (vp->msg_level & NETIF_MSG_TIMER) + printk(KERN_DEBUG "%s: Media selection timer tick happened, " + "%s %s duplex.\n", + dev->name, media_tbl[dev->if_port].name, + vp->full_duplex ? "full" : "half"); + + /* This only works with bus-master (non-3c590) chips. */ + if (vp->cur_tx - vp->dirty_tx > 1 && + (jiffies - dev->trans_start) > TX_TIMEOUT) { + /* Check for blocked interrupts. */ + if (inw(ioaddr + EL3_STATUS) & IntLatch) { + /* We have a blocked IRQ line. This should never happen, but + we recover as best we can.*/ + if ( ! vp->polling) { + if (jiffies - vp->last_reset > 10*HZ) { + printk(KERN_ERR "%s: IRQ %d is physically blocked! " + "Failing back to low-rate polling.\n", + dev->name, dev->irq); + vp->last_reset = jiffies; + } + vp->polling = 1; + } + vortex_interrupt(dev->irq, dev, 0); + next_tick = jiffies + 2; + } else { + vortex_tx_timeout(dev); + vp->last_reset = jiffies; + } + } disable_irq(dev->irq); old_window = inw(ioaddr + EL3_CMD) >> 13; @@ -1210,59 +1417,66 @@ static void vortex_timer(unsigned long data) case XCVR_10baseT: case XCVR_100baseTx: case XCVR_100baseFx: if (media_status & Media_LnkBeat) { ok = 1; - if (vortex_debug > 1) + if (vp->msg_level & NETIF_MSG_LINK) printk(KERN_DEBUG "%s: Media %s has link beat, %x.\n", dev->name, media_tbl[dev->if_port].name, media_status); - } else if (vortex_debug > 1) + } else if (vp->msg_level & NETIF_MSG_LINK) printk(KERN_DEBUG "%s: Media %s is has no link beat, %x.\n", dev->name, media_tbl[dev->if_port].name, media_status); break; - case XCVR_MII: case XCVR_NWAY: - mii_status = mdio_read(ioaddr, vp->phys[0], 1); - ok = 1; - if (debug > 1) - printk(KERN_DEBUG "%s: MII transceiver has status %4.4x.\n", - dev->name, mii_status); - if (mii_status & 0x0004) { - int mii_reg5 = mdio_read(ioaddr, vp->phys[0], 5); - if (! vp->force_fd && mii_reg5 != 0xffff) { - int duplex = (mii_reg5&0x0100) || - (mii_reg5 & 0x01C0) == 0x0040; - if (vp->full_duplex != duplex) { - vp->full_duplex = duplex; - printk(KERN_INFO "%s: Setting %s-duplex based on MII " - "#%d link partner capability of %4.4x.\n", - dev->name, vp->full_duplex ? "full" : "half", - vp->phys[0], mii_reg5); - /* Set the full-duplex bit. */ - outb((vp->full_duplex ? 0x20 : 0) | - (dev->mtu > 1500 ? 0x40 : 0), - ioaddr + Wn3_MAC_Ctrl); - } - next_tick = 60*HZ; - } - } - break; - default: /* Other media types handled by Tx timeouts. */ - if (vortex_debug > 1) - printk(KERN_DEBUG "%s: Media %s is has no indication, %x.\n", - dev->name, media_tbl[dev->if_port].name, media_status); + case XCVR_MII: case XCVR_NWAY: { + int mii_status = mdio_read(ioaddr, vp->phys[0], 1); + int mii_reg5, negotiated, duplex; + ok = 1; + if (vp->msg_level & NETIF_MSG_LINK) + printk(KERN_DEBUG "%s: MII transceiver has status %4.4x.\n", + dev->name, mii_status); + if (vp->medialock) + break; + if ((mii_status & 0x0004) == 0) { + next_tick = 5*HZ; + break; + } + mii_reg5 = mdio_read(ioaddr, vp->phys[0], 5); + negotiated = mii_reg5 & vp->advertising; + duplex = (negotiated & 0x0100) || (negotiated & 0x03C0) == 0x0040; + if (mii_reg5 == 0xffff || vp->full_duplex == duplex) + break; + if (vp->msg_level & NETIF_MSG_LINK) + printk(KERN_INFO "%s: Setting %s-duplex based on " + "MII #%d link partner capability of %4.4x.\n", + dev->name, vp->full_duplex ? "full" : "half", + vp->phys[0], mii_reg5); + vp->full_duplex = duplex; + /* Set the full-duplex bit. */ + EL3WINDOW(3); + if (duplex) + vp->wn3_mac_ctrl |= 0x120; + else + vp->wn3_mac_ctrl &= ~0x120; + outb(vp->wn3_mac_ctrl, ioaddr + Wn3_MAC_Ctrl); + break; + } + default: /* Other media types handled by Tx timeouts. */ + if (vp->msg_level & NETIF_MSG_LINK) + printk(KERN_DEBUG "%s: Media %s is has no indication, %x.\n", + dev->name, media_tbl[dev->if_port].name, media_status); ok = 1; } if ( ! ok) { - union wn3_config config; + int i_cfg; do { dev->if_port = media_tbl[dev->if_port].next; } while ( ! (vp->available_media & media_tbl[dev->if_port].mask)); if (dev->if_port == XCVR_Default) { /* Go back to default. */ dev->if_port = vp->default_media; - if (vortex_debug > 1) + if (vp->msg_level & NETIF_MSG_LINK) printk(KERN_DEBUG "%s: Media selection failing, using default " "%s port.\n", dev->name, media_tbl[dev->if_port].name); } else { - if (vortex_debug > 1) + if (vp->msg_level & NETIF_MSG_LINK) printk(KERN_DEBUG "%s: Media selection failed, now trying " "%s port.\n", dev->name, media_tbl[dev->if_port].name); @@ -1272,54 +1486,60 @@ static void vortex_timer(unsigned long data) media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); EL3WINDOW(3); - config.i = inl(ioaddr + Wn3_Config); - config.u.xcvr = dev->if_port; - outl(config.i, ioaddr + Wn3_Config); + i_cfg = inl(ioaddr + Wn3_Config); + i_cfg &= ~0x00f00000; + i_cfg |= (dev->if_port << 20); + outl(i_cfg, ioaddr + Wn3_Config); outw(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax, ioaddr + EL3_CMD); } EL3WINDOW(old_window); enable_irq(dev->irq); + if (vp->restore_intr_mask) + outw(FakeIntr, ioaddr + EL3_CMD); - if (vortex_debug > 2) + if (vp->msg_level & NETIF_MSG_TIMER) printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n", dev->name, media_tbl[dev->if_port].name); - vp->timer.expires = RUN_AT(next_tick); + vp->timer.expires = jiffies + next_tick; add_timer(&vp->timer); return; } -static void vortex_tx_timeout(struct device *dev) +static void vortex_tx_timeout(struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; + int tx_status = inb(ioaddr + TxStatus); + int intr_status = inw(ioaddr + EL3_STATUS); int j; printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n", - dev->name, inb(ioaddr + TxStatus), - inw(ioaddr + EL3_STATUS)); + dev->name, tx_status, intr_status); /* Slight code bloat to be user friendly. */ - if ((inb(ioaddr + TxStatus) & 0x88) == 0x88) + if ((tx_status & 0x88) == 0x88) printk(KERN_ERR "%s: Transmitter encountered 16 collisions --" " network cable problem?\n", dev->name); - if (inw(ioaddr + EL3_STATUS) & IntLatch) { + if (intr_status & IntLatch) { printk(KERN_ERR "%s: Interrupt posted but not delivered --" " IRQ blocked by another device?\n", dev->name); - /* Bad idea here.. but we might as well handle a few events. */ + /* Race condition possible, but we handle a few events. */ vortex_interrupt(dev->irq, dev, 0); } #if ! defined(final_version) && LINUX_VERSION_CODE >= 0x10300 if (vp->full_bus_master_tx) { int i; - printk(KERN_DEBUG " Flags; bus-master %d, full %d; dirty %d " - "current %d.\n", - vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx, vp->cur_tx); - printk(KERN_DEBUG " Transmit list %8.8x vs. %p.\n", - inl(ioaddr + DownListPtr), - &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]); + printk(KERN_DEBUG " Flags: bus-master %d full %d dirty %d " + "current %d restart_tx %d.\n", + vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx, vp->cur_tx, + vp->restart_tx); + printk(KERN_DEBUG " Transmit list %8.8x vs. %p, packet ID %2.2x.\n", + (int)inl(ioaddr + DownListPtr), + &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE], + inb(ioaddr + TxPktID)); for (i = 0; i < TX_RING_SIZE; i++) { printk(KERN_DEBUG " %d: @%p length %8.8x status %8.8x\n", i, &vp->tx_ring[i], @@ -1334,26 +1554,40 @@ static void vortex_tx_timeout(struct device *dev) break; vp->stats.tx_errors++; + if (vp->full_bus_master_tx) { - if (vortex_debug > 0) + if (vp->drv_flags & HAS_V2_TX) + outb(20, ioaddr + DownPollRate); + if (vp->msg_level & NETIF_MSG_TX_ERR) printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name); if (vp->cur_tx - vp->dirty_tx > 0 && inl(ioaddr + DownListPtr) == 0) outl(virt_to_bus(&vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]), ioaddr + DownListPtr); - if (vp->tx_full && (vp->cur_tx - vp->dirty_tx <= TX_RING_SIZE - 1)) { + else + vp->restart_tx = 1; + if (vp->drv_flags & IS_BOOMERANG) { + /* Room for a packet, to avoid long DownStall delays. */ + outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); + outw(DownUnstall, ioaddr + EL3_CMD); + } else { + if (dev->mtu > 2033) + outw(SetTxStart + (2000>>2), ioaddr + EL3_CMD); + } + + if (vp->tx_full && (vp->cur_tx - vp->dirty_tx <= TX_QUEUE_LEN - 1)) { vp->tx_full = 0; - clear_bit(0, (void*)&dev->tbusy); + netif_unpause_tx_queue(dev); } - outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); - outw(DownUnstall, ioaddr + EL3_CMD); - } else + } else { + netif_unpause_tx_queue(dev); vp->stats.tx_dropped++; - + } + /* Issue Tx Enable */ outw(TxEnable, ioaddr + EL3_CMD); dev->trans_start = jiffies; - + /* Switch to register set 7 for normal use. */ EL3WINDOW(7); } @@ -1363,7 +1597,7 @@ static void vortex_tx_timeout(struct device *dev) * the cache impact. */ static void -vortex_error(struct device *dev, int status) +vortex_error(struct net_device *dev, int status) { struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; @@ -1373,8 +1607,7 @@ vortex_error(struct device *dev, int status) if (status & TxComplete) { /* Really "TxError" for us. */ unsigned char tx_status = inb(ioaddr + TxStatus); /* Presumably a tx-timeout. We must merely re-enable. */ - if (vortex_debug > 2 - || (tx_status != 0x88 && vortex_debug > 0)) + if (vp->msg_level & NETIF_MSG_TX_ERR) printk(KERN_DEBUG"%s: Transmit error, Tx status register %2.2x.\n", dev->name, tx_status); if (tx_status & 0x14) vp->stats.tx_fifo_errors++; @@ -1382,8 +1615,10 @@ vortex_error(struct device *dev, int status) outb(0, ioaddr + TxStatus); if (tx_status & 0x30) do_tx_reset = 1; - else /* Merely re-enable the transmitter. */ + else { /* Merely re-enable the transmitter. */ outw(TxEnable, ioaddr + EL3_CMD); + vp->restart_tx = 1; + } } if (status & RxEarly) { /* Rx early is unused. */ vortex_rx(dev); @@ -1391,7 +1626,7 @@ vortex_error(struct device *dev, int status) } if (status & StatsFull) { /* Empty statistics. */ static int DoneDidThat = 0; - if (vortex_debug > 4) + if (vp->msg_level & NETIF_MSG_MISC) printk(KERN_DEBUG "%s: Updating stats.\n", dev->name); update_stats(ioaddr, dev); /* HACK: Disable statistics as an interrupt source. */ @@ -1409,31 +1644,47 @@ vortex_error(struct device *dev, int status) if (status & IntReq) { /* Restore all interrupt sources. */ outw(vp->status_enable, ioaddr + EL3_CMD); outw(vp->intr_enable, ioaddr + EL3_CMD); + vp->restore_intr_mask = 0; } if (status & HostError) { u16 fifo_diag; EL3WINDOW(4); fifo_diag = inw(ioaddr + Wn4_FIFODiag); - if (vortex_debug > 0) - printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n", - dev->name, fifo_diag); + if (vp->msg_level & NETIF_MSG_DRV) + printk(KERN_ERR "%s: Host error, status %x, FIFO diagnostic " + "register %4.4x.\n", + dev->name, status, fifo_diag); /* Adapter failure requires Tx/Rx reset and reinit. */ if (vp->full_bus_master_tx) { + int bus_status = inl(ioaddr + PktStatus); + /* 0x80000000 PCI master abort. */ + /* 0x40000000 PCI target abort. */ outw(TotalReset | 0xff, ioaddr + EL3_CMD); for (i = 2000; i >= 0 ; i--) if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) break; + if (vp->msg_level & NETIF_MSG_DRV) + printk(KERN_ERR "%s: PCI bus error, bus status %8.8x, reset " + "had %d tick left.\n", + dev->name, bus_status, i); /* Re-enable the receiver. */ outw(RxEnable, ioaddr + EL3_CMD); outw(TxEnable, ioaddr + EL3_CMD); + vp->restart_tx = 1; } else if (fifo_diag & 0x0400) do_tx_reset = 1; if (fifo_diag & 0x3000) { - outw(RxReset, ioaddr + EL3_CMD); - for (i = 2000; i >= 0 ; i--) + outw(RxReset | 7, ioaddr + EL3_CMD); + for (i = 200000; i >= 0 ; i--) if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) break; + if ((vp->drv_flags & HAS_V2_TX) && dev->mtu > 1500) { + EL3WINDOW(3); + outw(dev->mtu + 14, ioaddr + Wn3_MaxPktSize); + } /* Set the Rx filter to the current state. */ + memset(vp->mc_filter, 0, sizeof vp->mc_filter); + vp->rx_mode = 0; set_rx_mode(dev); outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ outw(AckIntr | HostError, ioaddr + EL3_CMD); @@ -1446,19 +1697,23 @@ vortex_error(struct device *dev, int status) if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) break; outw(TxEnable, ioaddr + EL3_CMD); + vp->restart_tx = 1; } } static int -vortex_start_xmit(struct sk_buff *skb, struct device *dev) +vortex_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; - if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) { - if (jiffies - dev->trans_start >= TX_TIMEOUT) + /* Block a timer-based transmit from overlapping. This happens when + packets are presumed lost, and we use this check the Tx status. */ + if (netif_pause_tx_queue(dev) != 0) { + /* This watchdog code is redundant with the media monitor timer. */ + if (jiffies - dev->trans_start > TX_TIMEOUT) vortex_tx_timeout(dev); return 1; } @@ -1471,16 +1726,18 @@ vortex_start_xmit(struct sk_buff *skb, struct device *dev) outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen); vp->tx_skb = skb; outw(StartDMADown, ioaddr + EL3_CMD); - /* dev->tbusy will be cleared at the DMADone interrupt. */ + netif_stop_tx_queue(dev); + /* Tx busy will be cleared at the DMADone interrupt. */ } else { /* ... and the packet rounded to a doubleword. */ outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); - DEV_FREE_SKB(skb); - if (inw(ioaddr + TxFree) > 1536) { - clear_bit(0, (void*)&dev->tbusy); - } else + dev_free_skb(skb); + if (inw(ioaddr + TxFree) <= 1536) { /* Interrupt us when the FIFO has room for max-sized packet. */ outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); + netif_stop_tx_queue(dev); + } else + netif_unpause_tx_queue(dev); /* Typical path */ } dev->trans_start = jiffies; @@ -1492,7 +1749,7 @@ vortex_start_xmit(struct sk_buff *skb, struct device *dev) while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) { if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ - if (vortex_debug > 2) + if (vp->msg_level & NETIF_MSG_TX_ERR) printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n", dev->name, tx_status); if (tx_status & 0x04) vp->stats.tx_fifo_errors++; @@ -1505,6 +1762,7 @@ vortex_start_xmit(struct sk_buff *skb, struct device *dev) break; } outw(TxEnable, ioaddr + EL3_CMD); + vp->restart_tx = 1; } outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */ } @@ -1513,38 +1771,46 @@ vortex_start_xmit(struct sk_buff *skb, struct device *dev) } static int -boomerang_start_xmit(struct sk_buff *skb, struct device *dev) +boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; + int entry; + struct boom_tx_desc *prev_entry; + unsigned long flags; + int i; - if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) { - if (jiffies - dev->trans_start >= TX_TIMEOUT) + if (netif_pause_tx_queue(dev) != 0) { + /* This watchdog code is redundant with the media monitor timer. */ + if (jiffies - dev->trans_start > TX_TIMEOUT) vortex_tx_timeout(dev); return 1; - } else { - /* Calculate the next Tx descriptor entry. */ - int entry = vp->cur_tx % TX_RING_SIZE; - struct boom_tx_desc *prev_entry = - &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE]; - unsigned long flags; - int i; + } - if (vortex_debug > 3) - printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n", - dev->name, vp->cur_tx); - if (vp->tx_full) { - if (vortex_debug >0) - printk(KERN_WARNING "%s: Tx Ring full, refusing to send buffer.\n", - dev->name); - return 1; - } - vp->tx_skbuff[entry] = skb; - vp->tx_ring[entry].next = 0; - vp->tx_ring[entry].addr = cpu_to_le32(virt_to_bus(skb->data)); - vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG); + /* Calculate the next Tx descriptor entry. */ + entry = vp->cur_tx % TX_RING_SIZE; + prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE]; + + if (vp->msg_level & NETIF_MSG_TX_QUEUED) + printk(KERN_DEBUG "%s: Queuing Tx packet, index %d.\n", + dev->name, vp->cur_tx); + /* Impossible error. */ + if (vp->tx_full) { + printk(KERN_WARNING "%s: Tx Ring full, refusing to send buffer.\n", + dev->name); + return 1; + } + vp->tx_skbuff[entry] = skb; + vp->tx_ring[entry].next = 0; + vp->tx_ring[entry].addr = virt_to_le32desc(skb->data); + vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG); + if (vp->capabilities & CapNoTxLength) + vp->tx_ring[entry].status = + cpu_to_le32(TxNoRoundup | TxIntrUploaded | (entry << 2)); + else vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); + if (vp->drv_flags & IS_BOOMERANG) { save_flags(flags); cli(); outw(DownStall, ioaddr + EL3_CMD); @@ -1552,66 +1818,64 @@ boomerang_start_xmit(struct sk_buff *skb, struct device *dev) for (i = 600; i >= 0 ; i--) if ( (inw(ioaddr + EL3_STATUS) & CmdInProgress) == 0) break; - prev_entry->next = cpu_to_le32(virt_to_bus(&vp->tx_ring[entry])); + vp->tx_desc_tail->next = virt_to_le32desc(&vp->tx_ring[entry]); + vp->tx_desc_tail = &vp->tx_ring[entry]; if (inl(ioaddr + DownListPtr) == 0) { outl(virt_to_bus(&vp->tx_ring[entry]), ioaddr + DownListPtr); queued_packet++; } outw(DownUnstall, ioaddr + EL3_CMD); restore_flags(flags); - - vp->cur_tx++; - if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) - vp->tx_full = 1; - else { /* Clear previous interrupt enable. */ + } else { + vp->tx_desc_tail->next = virt_to_le32desc(&vp->tx_ring[entry]); + vp->tx_desc_tail = &vp->tx_ring[entry]; + if (vp->restart_tx) { + outl(virt_to_bus(vp->tx_desc_tail), ioaddr + DownListPtr); + vp->restart_tx = 0; + queued_packet++; + } + } + vp->cur_tx++; + if (vp->cur_tx - vp->dirty_tx >= TX_QUEUE_LEN) { + vp->tx_full = 1; + /* Check for a just-cleared queue. */ + if (vp->cur_tx - (volatile unsigned int)vp->dirty_tx + < TX_QUEUE_LEN - 2) { + vp->tx_full = 0; + netif_unpause_tx_queue(dev); + } else + netif_stop_tx_queue(dev); + } else { /* Clear previous interrupt enable. */ #if defined(tx_interrupt_mitigation) - prev_entry->status &= cpu_to_le32(~TxIntrUploaded); + prev_entry->status &= cpu_to_le32(~TxIntrUploaded); #endif - clear_bit(0, (void*)&dev->tbusy); - } - dev->trans_start = jiffies; - return 0; + netif_unpause_tx_queue(dev); /* Typical path */ } + dev->trans_start = jiffies; + return 0; } /* The interrupt handler does all of the Rx thread work and cleans up after the Tx thread. */ static void vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - struct device *dev = dev_id; + struct net_device *dev = dev_id; struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr; int latency, status; - int work_done = max_interrupt_work; - -#if defined(__i386__) - /* A lock to prevent simultaneous entry bug on Intel SMP machines. */ - if (test_and_set_bit(0, (void*)&dev->interrupt)) { - printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n", - dev->name); - dev->interrupt = 0; /* Avoid halting machine. */ - return; - } -#else - if (dev->interrupt) { - printk(KERN_ERR "%s: Re-entering the interrupt handler.\n", dev->name); - return; - } - dev->interrupt = 1; -#endif + int work_done = vp->max_interrupt_work; - dev->interrupt = 1; ioaddr = dev->base_addr; latency = inb(ioaddr + Timer); status = inw(ioaddr + EL3_STATUS); if (status == 0xffff) goto handler_exit; - if (vortex_debug > 4) + if (vp->msg_level & NETIF_MSG_INTR) printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n", dev->name, status, latency); do { - if (vortex_debug > 5) + if (vp->msg_level & NETIF_MSG_INTR) printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n", dev->name, status); if (status & RxComplete) @@ -1622,12 +1886,11 @@ static void vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs) } if (status & TxAvailable) { - if (vortex_debug > 5) + if (vp->msg_level & NETIF_MSG_TX_DONE) printk(KERN_DEBUG " TX room bit was handled.\n"); /* There's room in the FIFO for a full-sized packet. */ outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); - clear_bit(0, (void*)&dev->tbusy); - mark_bh(NET_BH); + netif_resume_tx_queue(dev); } if (status & DownComplete) { @@ -1636,30 +1899,37 @@ static void vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs) outw(AckIntr | DownComplete, ioaddr + EL3_CMD); while (vp->cur_tx - dirty_tx > 0) { int entry = dirty_tx % TX_RING_SIZE; - if (inl(ioaddr + DownListPtr) == - virt_to_bus(&vp->tx_ring[entry])) + int tx_status = le32_to_cpu(vp->tx_ring[entry].status); + if (vp->capabilities & CapNoTxLength) { + if ( ! (tx_status & TxDownComplete)) + break; + } else if (inl(ioaddr + DownListPtr) == + virt_to_bus(&vp->tx_ring[entry])) break; /* It still hasn't been processed. */ + if (vp->msg_level & NETIF_MSG_TX_DONE) + printk(KERN_DEBUG "%s: Transmit done, Tx status %8.8x.\n", + dev->name, tx_status); if (vp->tx_skbuff[entry]) { - DEV_FREE_SKB(vp->tx_skbuff[entry]); + dev_free_skb_irq(vp->tx_skbuff[entry]); vp->tx_skbuff[entry] = 0; } /* vp->stats.tx_packets++; Counted below. */ dirty_tx++; } vp->dirty_tx = dirty_tx; - if (vp->tx_full && (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) { + /* 4 entry hysteresis before marking the queue non-full. */ + if (vp->tx_full && (vp->cur_tx - dirty_tx < TX_QUEUE_LEN - 4)) { vp->tx_full = 0; - clear_bit(0, (void*)&dev->tbusy); - mark_bh(NET_BH); + netif_resume_tx_queue(dev); } } if (status & DMADone) { if (inw(ioaddr + Wn7_MasterStatus) & 0x1000) { outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */ - DEV_FREE_SKB(vp->tx_skb); /* Release the transfered buffer */ + /* Release the transfered buffer */ + dev_free_skb_irq(vp->tx_skb); if (inw(ioaddr + TxFree) > 1536) { - clear_bit(0, (void*)&dev->tbusy); - mark_bh(NET_BH); + netif_resume_tx_queue(dev); } else /* Interrupt when FIFO has room for max-sized packet. */ outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); } @@ -1683,6 +1953,7 @@ static void vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs) outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD); outw(AckIntr | 0x7FF, ioaddr + EL3_CMD); /* The timer will reenable interrupts. */ + vp->restore_intr_mask = 1; break; } } @@ -1693,32 +1964,27 @@ static void vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs) } while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); - if (vortex_debug > 4) + if (vp->msg_level & NETIF_MSG_INTR) printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name, status); handler_exit: -#if defined(__i386__) - clear_bit(0, (void*)&dev->interrupt); -#else - dev->interrupt = 0; -#endif return; } -static int vortex_rx(struct device *dev) +static int vortex_rx(struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; int i; short rx_status; - if (vortex_debug > 5) + if (vp->msg_level & NETIF_MSG_RX_STATUS) printk(KERN_DEBUG" In rx_packet(), status %4.4x, rx_status %4.4x.\n", inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus)); while ((rx_status = inw(ioaddr + RxStatus)) > 0) { if (rx_status & 0x4000) { /* Error, update stats. */ unsigned char rx_error = inb(ioaddr + RxErrors); - if (vortex_debug > 2) + if (vp->msg_level & NETIF_MSG_RX_ERR) printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error); vp->stats.rx_errors++; if (rx_error & 0x01) vp->stats.rx_over_errors++; @@ -1732,7 +1998,7 @@ static int vortex_rx(struct device *dev) struct sk_buff *skb; skb = dev_alloc_skb(pkt_len + 5); - if (vortex_debug > 4) + if (vp->msg_level & NETIF_MSG_RX_STATUS) printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); if (skb != NULL) { @@ -1756,12 +2022,15 @@ static int vortex_rx(struct device *dev) netif_rx(skb); dev->last_rx = jiffies; vp->stats.rx_packets++; +#if LINUX_VERSION_CODE > 0x20127 + vp->stats.rx_bytes += pkt_len; +#endif /* Wait a limited time to go to next packet. */ for (i = 200; i >= 0; i--) if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress)) break; continue; - } else if (vortex_debug) + } else if (vp->msg_level & NETIF_MSG_RX_ERR) printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of " "size %d.\n", dev->name, pkt_len); } @@ -1777,7 +2046,7 @@ static int vortex_rx(struct device *dev) } static int -boomerang_rx(struct device *dev) +boomerang_rx(struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; int entry = vp->cur_rx % RX_RING_SIZE; @@ -1785,42 +2054,51 @@ boomerang_rx(struct device *dev) int rx_status; int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx; - if (vortex_debug > 5) + if (vp->msg_level & NETIF_MSG_RX_STATUS) printk(KERN_DEBUG " In boomerang_rx(), status %4.4x, rx_status " - "%4.4x.\n", - inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus)); + "%8.8x.\n", + inw(ioaddr+EL3_STATUS), (int)inl(ioaddr+UpPktStatus)); while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){ if (--rx_work_limit < 0) break; if (rx_status & RxDError) { /* Error, update stats. */ unsigned char rx_error = rx_status >> 16; - if (vortex_debug > 2) + if (vp->msg_level & NETIF_MSG_RX_ERR) printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error); vp->stats.rx_errors++; - if (rx_error & 0x01) vp->stats.rx_over_errors++; if (rx_error & 0x02) vp->stats.rx_length_errors++; + if (rx_error & 0x10) vp->stats.rx_length_errors++; if (rx_error & 0x04) vp->stats.rx_frame_errors++; if (rx_error & 0x08) vp->stats.rx_crc_errors++; - if (rx_error & 0x10) vp->stats.rx_length_errors++; + if (rx_error & 0x01) { + vp->stats.rx_over_errors++; + if (vp->drv_flags & HAS_V2_TX) { + int cur_rx_thresh = inb(ioaddr + RxPriorityThresh); + if (cur_rx_thresh < 0x20) + outb(cur_rx_thresh + 1, ioaddr + RxPriorityThresh); + else + printk(KERN_WARNING "%s: Excessive PCI latency causing" + " packet corruption.\n", dev->name); + } + } } else { /* The packet length: up to 4.5K!. */ int pkt_len = rx_status & 0x1fff; struct sk_buff *skb; - if (vortex_debug > 4) + if (vp->msg_level & NETIF_MSG_RX_STATUS) printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); /* Check if the packet is long enough to just accept without copying to a properly sized skbuff. */ - if (pkt_len < rx_copybreak + if (pkt_len < vp->rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != 0) { skb->dev = dev; skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ /* 'skb_put()' points to the start of sk_buff data area. */ memcpy(skb_put(skb, pkt_len), - bus_to_virt(le32_to_cpu(vp->rx_ring[entry].addr)), - pkt_len); + le32desc_to_virt(vp->rx_ring[entry].addr), pkt_len); rx_copy++; } else { void *temp; @@ -1829,7 +2107,7 @@ boomerang_rx(struct device *dev) vp->rx_skbuff[entry] = NULL; temp = skb_put(skb, pkt_len); /* Remove this checking code for final release. */ - if (bus_to_virt(le32_to_cpu(vp->rx_ring[entry].addr)) != temp) + if (le32desc_to_virt(vp->rx_ring[entry].addr) != temp) printk(KERN_ERR "%s: Warning -- the skbuff addresses do not match" " in boomerang_rx: %p vs. %p.\n", dev->name, bus_to_virt(le32_to_cpu(vp->rx_ring[entry].addr)), @@ -1849,20 +2127,23 @@ boomerang_rx(struct device *dev) netif_rx(skb); dev->last_rx = jiffies; vp->stats.rx_packets++; +#if LINUX_VERSION_CODE > 0x20127 + vp->stats.rx_bytes += pkt_len; +#endif } entry = (++vp->cur_rx) % RX_RING_SIZE; } /* Refill the Rx ring buffers. */ - for (; vp->dirty_rx < vp->cur_rx; vp->dirty_rx++) { + for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { struct sk_buff *skb; entry = vp->dirty_rx % RX_RING_SIZE; if (vp->rx_skbuff[entry] == NULL) { - skb = dev_alloc_skb(PKT_BUF_SZ); + skb = dev_alloc_skb(vp->rx_buf_sz); if (skb == NULL) break; /* Bad news! */ skb->dev = dev; /* Mark as being used by this device. */ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ - vp->rx_ring[entry].addr = cpu_to_le32(virt_to_bus(skb->tail)); + vp->rx_ring[entry].addr = virt_to_le32desc(skb->tail); vp->rx_skbuff[entry] = skb; } vp->rx_ring[entry].status = 0; /* Clear complete bit. */ @@ -1871,25 +2152,11 @@ boomerang_rx(struct device *dev) return 0; } -static int -vortex_close(struct device *dev) +static void +vortex_down(struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; - int i; - - dev->start = 0; - dev->tbusy = 1; - - if (vortex_debug > 1) { - printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n", - dev->name, inw(ioaddr + EL3_STATUS), inb(ioaddr + TxStatus)); - printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d" - " tx_queued %d Rx pre-checksummed %d.\n", - dev->name, rx_nocopy, rx_copy, queued_packet, rx_csumhits); - } - - del_timer(&vp->timer); /* Turn off statistics ASAP. We update vp->stats below. */ outw(StatsDisable, ioaddr + EL3_CMD); @@ -1902,44 +2169,66 @@ vortex_close(struct device *dev) /* Turn off thinnet power. Green! */ outw(StopCoax, ioaddr + EL3_CMD); - free_irq(dev->irq, dev); - outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); update_stats(ioaddr, dev); - if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ + if (vp->full_bus_master_rx) outl(0, ioaddr + UpListPtr); + if (vp->full_bus_master_tx) + outl(0, ioaddr + DownListPtr); +} + +static int +vortex_close(struct net_device *dev) +{ + struct vortex_private *vp = (struct vortex_private *)dev->priv; + long ioaddr = dev->base_addr; + int i; + + netif_stop_tx_queue(dev); + + if (vp->msg_level & NETIF_MSG_IFDOWN) { + printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n", + dev->name, inw(ioaddr + EL3_STATUS), inb(ioaddr + TxStatus)); + printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d" + " tx_queued %d Rx pre-checksummed %d.\n", + dev->name, rx_nocopy, rx_copy, queued_packet, rx_csumhits); + } + + del_timer(&vp->timer); + vortex_down(dev); + free_irq(dev->irq, dev); + outw(TotalReset | 0x34, ioaddr + EL3_CMD); + + if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ for (i = 0; i < RX_RING_SIZE; i++) if (vp->rx_skbuff[i]) { #if LINUX_VERSION_CODE < 0x20100 vp->rx_skbuff[i]->free = 1; #endif - DEV_FREE_SKB(vp->rx_skbuff[i]); + dev_free_skb(vp->rx_skbuff[i]); vp->rx_skbuff[i] = 0; } } if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */ - outl(0, ioaddr + DownListPtr); for (i = 0; i < TX_RING_SIZE; i++) if (vp->tx_skbuff[i]) { - DEV_FREE_SKB(vp->tx_skbuff[i]); + dev_free_skb(vp->tx_skbuff[i]); vp->tx_skbuff[i] = 0; } } - if (vp->capabilities & CapPwrMgmt) - acpi_set_WOL(dev); MOD_DEC_USE_COUNT; return 0; } -static struct net_device_stats *vortex_get_stats(struct device *dev) +static struct net_device_stats *vortex_get_stats(struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; unsigned long flags; - if (dev->start) { + if (netif_running(dev)) { save_flags(flags); cli(); update_stats(dev->base_addr, dev); @@ -1955,7 +2244,7 @@ static struct net_device_stats *vortex_get_stats(struct device *dev) table. This is done by checking that the ASM (!) code generated uses atomic updates with '+='. */ -static void update_stats(long ioaddr, struct device *dev) +static void update_stats(long ioaddr, struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; int old_window = inw(ioaddr + EL3_CMD); @@ -1978,8 +2267,8 @@ static void update_stats(long ioaddr, struct device *dev) /* Don't bother with register 9, an extension of registers 6&7. If we do use the 6&7 values the atomic update assumption above is invalid. */ + /* Rx Bytes is unreliable */ inw(ioaddr + 10); #if LINUX_VERSION_CODE > 0x020119 - vp->stats.rx_bytes += inw(ioaddr + 10); vp->stats.tx_bytes += inw(ioaddr + 12); #else inw(ioaddr + 10); @@ -1994,49 +2283,151 @@ static void update_stats(long ioaddr, struct device *dev) return; } -static int vortex_ioctl(struct device *dev, struct ifreq *rq, int cmd) +static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; u16 *data = (u16 *)&rq->ifr_data; - int phy = vp->phys[0] & 0x1f; + u32 *data32 = (void *)&rq->ifr_data; + int phy = vp->phys[0]; switch(cmd) { - case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */ + case 0x8947: case 0x89F0: + /* SIOCGMIIPHY: Get the address of the PHY in use. */ data[0] = phy; - case SIOCDEVPRIVATE+1: /* Read the specified MII register. */ + /* Fall Through */ + case 0x8948: case 0x89F1: + /* SIOCGMIIREG: Read the specified MII register. */ + if (data[0] == 32) { /* Emulate MII for 3c59*, 3c900. */ + data[3] = 0; + switch (data[1]) { + case 0: + if (dev->if_port == XCVR_100baseTx) data[3] |= 0x2000; + if (vp->full_duplex) data[3] |= 0x0100; + break; + case 1: + if (vp->available_media & 0x02) data[3] |= 0x6000; + if (vp->available_media & 0x08) data[3] |= 0x1800; + spin_lock(&vp->window_lock); + EL3WINDOW(4); + if (inw(ioaddr + Wn4_Media) & Media_LnkBeat) data[3] |= 0x0004; + spin_unlock(&vp->window_lock); + break; + case 2: data[3] = 0x0280; break; /* OUI 00:a0:24 */ + case 3: data[3] = 0x9000; break; + default: break; + } + return 0; + } + spin_lock(&vp->window_lock); EL3WINDOW(4); data[3] = mdio_read(ioaddr, data[0] & 0x1f, data[1] & 0x1f); + spin_unlock(&vp->window_lock); return 0; - case SIOCDEVPRIVATE+2: /* Write the specified MII register */ + case 0x8949: case 0x89F2: + /* SIOCSMIIREG: Write the specified MII register */ if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (data[0] == vp->phys[0]) { + u16 value = data[2]; + if (vp->phys[0] == 32) { + if (data[1] == 0) { + vp->media_override = (value & 0x2000) ? + XCVR_100baseTx : XCVR_10baseT; + vp->full_duplex = (value & 0x0100) ? 1 : 0; + vp->medialock = 1; + } + return 0; + } + switch (data[1]) { + case 0: + /* Check for autonegotiation on or reset. */ + vp->medialock = (value & 0x9000) ? 0 : 1; + if (vp->medialock) + vp->full_duplex = (value & 0x0100) ? 1 : 0; + break; + case 4: vp->advertising = value; break; + } + /* Perhaps check_duplex(dev), depending on chip semantics. */ + } + spin_lock(&vp->window_lock); EL3WINDOW(4); mdio_write(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2]); + spin_unlock(&vp->window_lock); + return 0; + case SIOCGPARAMS: + data32[0] = vp->msg_level; + data32[1] = vp->multicast_filter_limit; + data32[2] = vp->max_interrupt_work; + data32[3] = vp->rx_copybreak; + return 0; + case SIOCSPARAMS: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + vp->msg_level = data32[0]; + vp->multicast_filter_limit = data32[1]; + vp->max_interrupt_work = data32[2]; + vp->rx_copybreak = data32[3]; return 0; default: return -EOPNOTSUPP; } } +static unsigned const ethernet_polynomial = 0x04c11db7U; +static inline u32 ether_crc(int length, unsigned char *data) +{ + int crc = -1; + + while(--length >= 0) { + unsigned char current_octet = *data++; + int bit; + for (bit = 0; bit < 8; bit++, current_octet >>= 1) + crc = (crc << 1) ^ + ((crc < 0) ^ (current_octet & 1) ? ethernet_polynomial : 0); + } + return crc; +} + /* Pre-Cyclone chips have no documented multicast filter, so the only - multicast setting is to receive all multicast frames. At least - the chip has a very clean way to set the mode, unlike many others. */ -static void set_rx_mode(struct device *dev) + multicast setting is to receive all multicast frames. Cyclone and later + chips have a write-only table of unknown size. + At least the chip has a very clean way to set the other filter modes. */ +static void set_rx_mode(struct net_device *dev) { + struct vortex_private *vp = (void *)dev->priv; long ioaddr = dev->base_addr; int new_mode; if (dev->flags & IFF_PROMISC) { - if (vortex_debug > 0) - printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name); + /* Unconditionally log a net tap. */ + printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name); new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm; - } else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) { + } else if (dev->flags & IFF_ALLMULTI) { + new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast; + } else if ((vp->drv_flags & HAS_V2_TX) && + dev->mc_count < vp->multicast_filter_limit) { + struct dev_mc_list *mclist; + int i; + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + int filter_bit = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0xff; + if (test_bit(filter_bit, vp->mc_filter)) + continue; + outw(SetFilterBit | 0x0400 | filter_bit, ioaddr + EL3_CMD); + set_bit(filter_bit, vp->mc_filter); + } + + new_mode = SetRxFilter|RxStation|RxMulticastHash|RxBroadcast; + } else if (dev->mc_count) { new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast; } else new_mode = SetRxFilter | RxStation | RxBroadcast; - outw(new_mode, ioaddr + EL3_CMD); + if (vp->rx_mode != new_mode) { + vp->rx_mode = new_mode; + outw(new_mode, ioaddr + EL3_CMD); + } } @@ -2090,19 +2481,15 @@ static int mdio_read(long ioaddr, int phy_id, int location) outw(dataval | MDIO_SHIFT_CLK, mdio_addr); mdio_delay(); } - /* Read the two transition, 16 data, and wire-idle bits. */ - for (i = 19; i > 0; i--) { + /* Read the two transition and 16 data bits. */ + for (i = 18; i > 0; i--) { outw(MDIO_ENB_IN, mdio_addr); mdio_delay(); retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); mdio_delay(); } -#if 0 - return (retval>>1) & 0x1ffff; -#else - return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff; -#endif + return retval & 0x10000 ? 0xffff : retval & 0xffff; } static void mdio_write(long ioaddr, int phy_id, int location, int value) @@ -2123,19 +2510,15 @@ static void mdio_write(long ioaddr, int phy_id, int location, int value) mdio_delay(); } /* Leave the interface idle. */ - for (i = 1; i >= 0; i--) { - outw(MDIO_ENB_IN, mdio_addr); - mdio_delay(); - outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } + mdio_sync(ioaddr, 32); return; } +#if ! defined(NO_PCI) /* ACPI: Advanced Configuration and Power Interface. */ /* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */ -static void acpi_set_WOL(struct device *dev) +static void acpi_set_WOL(struct net_device *dev) { struct vortex_private *vp = (struct vortex_private *)dev->priv; long ioaddr = dev->base_addr; @@ -2147,57 +2530,105 @@ static void acpi_set_WOL(struct device *dev) outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD); outw(RxEnable, ioaddr + EL3_CMD); /* Change the power state to D3; RxEnable doesn't take effect. */ - pcibios_write_config_word(vp->pci_bus, vp->pci_devfn, 0xe0, 0x8103); + pci_write_config_word(vp->pci_dev, 0xe0, 0x8103); } -/* Change from D3 (sleep) to D0 (active). - Problem: The Cyclone forgets all PCI config info during the transition! */ -static void acpi_wake(int bus, int devfn) +#endif + +static int pwr_event(void *dev_instance, int event) { - u32 base0, base1, romaddr; - u16 pci_command, pwr_command; - u8 pci_latency, pci_cacheline, irq; + struct net_device *dev = dev_instance; + struct vortex_private *np = (struct vortex_private *)dev->priv; + long ioaddr = dev->base_addr; - pcibios_read_config_word(bus, devfn, 0xe0, &pwr_command); - if ((pwr_command & 3) == 0) - return; - pcibios_read_config_word( bus, devfn, PCI_COMMAND, &pci_command); - pcibios_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, &base0); - pcibios_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_1, &base1); - pcibios_read_config_dword(bus, devfn, PCI_ROM_ADDRESS, &romaddr); - pcibios_read_config_byte( bus, devfn, PCI_LATENCY_TIMER, &pci_latency); - pcibios_read_config_byte( bus, devfn, PCI_CACHE_LINE_SIZE, &pci_cacheline); - pcibios_read_config_byte( bus, devfn, PCI_INTERRUPT_LINE, &irq); - - pcibios_write_config_word( bus, devfn, 0xe0, 0x0000); - pcibios_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, base0); - pcibios_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_1, base1); - pcibios_write_config_dword(bus, devfn, PCI_ROM_ADDRESS, romaddr); - pcibios_write_config_byte( bus, devfn, PCI_INTERRUPT_LINE, irq); - pcibios_write_config_byte( bus, devfn, PCI_LATENCY_TIMER, pci_latency); - pcibios_write_config_byte( bus, devfn, PCI_CACHE_LINE_SIZE, pci_cacheline); - pcibios_write_config_word( bus, devfn, PCI_COMMAND, pci_command | 5); + if (np->msg_level & NETIF_MSG_LINK) + printk(KERN_DEBUG "%s: Handling power event %d.\n", dev->name, event); + switch(event) { + case DRV_ATTACH: + MOD_INC_USE_COUNT; + break; + case DRV_SUSPEND: + vortex_down(dev); + netif_stop_tx_queue(dev); + if (np->capabilities & CapPwrMgmt) + acpi_set_WOL(dev); + break; + case DRV_RESUME: + /* This is incomplete: the actions are very chip specific. */ + activate_xcvr(dev); + set_media_type(dev); + start_operation(dev); + np->rx_mode = 0; + set_rx_mode(dev); + start_operation1(dev); + break; + case DRV_DETACH: { + struct net_device **devp, **next; + if (dev->flags & IFF_UP) { + dev_close(dev); + dev->flags &= ~(IFF_UP|IFF_RUNNING); + } + unregister_netdev(dev); + release_region(dev->base_addr, pci_tbl[np->chip_id].io_size); +#ifndef USE_IO_OPS + iounmap((char *)dev->base_addr); +#endif + for (devp = &root_vortex_dev; *devp; devp = next) { + next = &((struct vortex_private *)(*devp)->priv)->next_module; + if (*devp == dev) { + *devp = *next; + break; + } + } + if (np->priv_addr) + kfree(np->priv_addr); + kfree(dev); + MOD_DEC_USE_COUNT; + break; + } + case DRV_PWR_WakeOn: + if ( ! (np->capabilities & CapPwrMgmt)) + return -1; + EL3WINDOW(7); + /* Power up on: 1=Downloaded Filter, 2=Magic Packets, 4=Link Status.*/ + outw(2, ioaddr + 12); + /* This RxEnable doesn't take effect if we immediately change to D3. */ + outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD); + outw(RxEnable, ioaddr + EL3_CMD); + acpi_set_pwr_state(np->pci_dev, ACPI_D3); + break; + } + return 0; } #ifdef MODULE void cleanup_module(void) { - struct device *next_dev; + struct net_device *next_dev; #ifdef CARDBUS unregister_driver(&vortex_ops); +#elif ! defined(NO_PCI) + pci_drv_unregister(&vortex_drv_id); #endif /* No need to check MOD_IN_USE, as sys_delete_module() checks. */ while (root_vortex_dev) { struct vortex_private *vp=(void *)(root_vortex_dev->priv); - next_dev = vp->next_module; unregister_netdev(root_vortex_dev); - outw(TotalReset, root_vortex_dev->base_addr + EL3_CMD); + outw(TotalReset | 0x14, root_vortex_dev->base_addr + EL3_CMD); + if (vp->capabilities & CapPwrMgmt) + acpi_set_WOL(root_vortex_dev); +#ifdef USE_MEM_OPS + iounmap((char *)root_vortex_dev->base_addr); +#else release_region(root_vortex_dev->base_addr, pci_tbl[vp->chip_id].io_size); +#endif + next_dev = vp->next_module; + if (vp->priv_addr) + kfree(vp->priv_addr); kfree(root_vortex_dev); - kfree(vp->priv_addr); root_vortex_dev = next_dev; } } @@ -2206,9 +2637,10 @@ void cleanup_module(void) /* * Local variables: - * compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c59x.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`" - * SMP-compile-command: "gcc -D__SMP__ -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c59x.c" - * cardbus-compile-command: "gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c59x.c -o 3c575_cb.o -I/usr/src/linux/pcmcia-cs-3.0.9/include/" + * compile-command: "make KERNVER=`uname -r` 3c59x.o" + * compile-cmd: "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c 3c59x.c" + * cardbus-compile-command: "gcc -DCARDBUS -DMODULE -Wall -Wstrict-prototypes -O6 -c 3c59x.c -o 3c575_cb.o -I/usr/src/pcmcia/include/" + * eisa-only-compile: "gcc -DNO_PCI -DMODULE -O6 -c 3c59x.c -o 3c597.o" * c-indent-level: 4 * c-basic-offset: 4 * tab-width: 4 |