summaryrefslogtreecommitdiff
path: root/linux/dev/drivers/scsi/g_NCR5380.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux/dev/drivers/scsi/g_NCR5380.c')
-rw-r--r--linux/dev/drivers/scsi/g_NCR5380.c739
1 files changed, 739 insertions, 0 deletions
diff --git a/linux/dev/drivers/scsi/g_NCR5380.c b/linux/dev/drivers/scsi/g_NCR5380.c
new file mode 100644
index 0000000..e2d64a1
--- /dev/null
+++ b/linux/dev/drivers/scsi/g_NCR5380.c
@@ -0,0 +1,739 @@
+/*
+ * Generic Generic NCR5380 driver
+ *
+ * Copyright 1993, Drew Eckhardt
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 440-4894
+ *
+ * NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
+ * K.Lentin@cs.monash.edu.au
+ *
+ * ALPHA RELEASE 1.
+ *
+ * For more information, please consult
+ *
+ * NCR 5380 Family
+ * SCSI Protocol Controller
+ * Databook
+ *
+ * NCR Microelectronics
+ * 1635 Aeroplaza Drive
+ * Colorado Springs, CO 80916
+ * 1+ (719) 578-3400
+ * 1+ (800) 334-5454
+ */
+
+/*
+ * TODO : flesh out DMA support, find some one actually using this (I have
+ * a memory mapped Trantor board that works fine)
+ */
+
+/*
+ * Options :
+ *
+ * PARITY - enable parity checking. Not supported.
+ *
+ * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
+ *
+ * USLEEP - enable support for devices that don't disconnect. Untested.
+ *
+ * The card is detected and initialized in one of several ways :
+ * 1. With command line overrides - NCR5380=port,irq may be
+ * used on the LILO command line to override the defaults.
+ *
+ * 2. With the GENERIC_NCR5380_OVERRIDE compile time define. This is
+ * specified as an array of address, irq, dma, board tuples. Ie, for
+ * one board at 0x350, IRQ5, no dma, I could say
+ * -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}}
+ *
+ * -1 should be specified for no or DMA interrupt, -2 to autoprobe for an
+ * IRQ line if overridden on the command line.
+ *
+ * 3. When included as a module, with arguments passed on the command line:
+ * ncr_irq=xx the interrupt
+ * ncr_addr=xx the port or base address (for port or memory
+ * mapped, resp.)
+ * ncr_dma=xx the DMA
+ * ncr_5380=1 to set up for a NCR5380 board
+ * ncr_53c400=1 to set up for a NCR53C400 board
+ * e.g.
+ * modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
+ * for a port mapped NCR5380 board or
+ * modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+ * for a memory mapped NCR53C400 board with interrupts disabled.
+ *
+ * 255 should be specified for no or DMA interrupt, 254 to autoprobe for an
+ * IRQ line if overridden on the command line.
+ *
+ */
+
+/*
+ * $Log: generic_NCR5380.c,v $
+ */
+
+#ifdef MACH
+#define GENERIC_NCR5380_OVERRIDE {{(NCR5380_map_type)0x350,5,0,BOARD_NCR53C400}};
+#define CONFIG_SCSI_GENERIC_NCR53C400
+#define CONFIG_SCSI_G_NCR5380_MEM
+#endif
+
+#define AUTOPROBE_IRQ
+#define AUTOSENSE
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SCSI_GENERIC_NCR53C400
+#define NCR53C400_PSEUDO_DMA 1
+#define PSEUDO_DMA
+#define NCR53C400
+#define NCR5380_STATS
+#undef NCR5380_STAT_LIMIT
+#endif
+#if defined(CONFIG_SCSI_G_NCR5380_PORT) && defined(CONFIG_SCSI_G_NCR5380_MEM)
+#error You can not configure the Generic NCR 5380 SCSI Driver for memory mapped I/O and port mapped I/O at the same time (yet)
+#endif
+#if !defined(CONFIG_SCSI_G_NCR5380_PORT) && !defined(CONFIG_SCSI_G_NCR5380_MEM)
+#error You must configure the Generic NCR 5380 SCSI Driver for one of memory mapped I/O and port mapped I/O.
+#endif
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/blk.h>
+#include "scsi.h"
+#include "hosts.h"
+#include "g_NCR5380.h"
+#include "NCR5380.h"
+#include "constants.h"
+#include "sd.h"
+#include<linux/stat.h>
+
+struct proc_dir_entry proc_scsi_g_ncr5380 = {
+ PROC_SCSI_GENERIC_NCR5380, 9, "g_NCR5380",
+ S_IFDIR | S_IRUGO | S_IXUGO, 2
+};
+
+#define NCR_NOT_SET 0
+static int ncr_irq=NCR_NOT_SET;
+static int ncr_dma=NCR_NOT_SET;
+static int ncr_addr=NCR_NOT_SET;
+static int ncr_5380=NCR_NOT_SET;
+static int ncr_53c400=NCR_NOT_SET;
+
+static struct override {
+ NCR5380_implementation_fields;
+ int irq;
+ int dma;
+ int board; /* Use NCR53c400, Ricoh, etc. extensions ? */
+} overrides
+#ifdef GENERIC_NCR5380_OVERRIDE
+ [] = GENERIC_NCR5380_OVERRIDE
+#else
+ [1] = {{0,},};
+#endif
+
+#define NO_OVERRIDES (sizeof(overrides) / sizeof(struct override))
+
+/*
+ * Function : static internal_setup(int board, char *str, int *ints)
+ *
+ * Purpose : LILO command line initialization of the overrides array,
+ *
+ * Inputs : board - either BOARD_NCR5380 for a normal NCR5380 board,
+ * or BOARD_NCR53C400 for a NCR53C400 board. str - unused, ints -
+ * array of integer parameters with ints[0] equal to the number of ints.
+ *
+ */
+
+static void internal_setup(int board, char *str, int *ints) {
+ static int commandline_current = 0;
+ switch (board) {
+ case BOARD_NCR5380:
+ if (ints[0] != 2 && ints[0] != 3) {
+ printk("generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n");
+ return;
+ }
+ case BOARD_NCR53C400:
+ if (ints[0] != 2) {
+ printk("generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n");
+ return;
+ }
+ }
+
+ if (commandline_current < NO_OVERRIDES) {
+ overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type)ints[1];
+ overrides[commandline_current].irq = ints[2];
+ if (ints[0] == 3)
+ overrides[commandline_current].dma = ints[3];
+ else
+ overrides[commandline_current].dma = DMA_NONE;
+ overrides[commandline_current].board = board;
+ ++commandline_current;
+ }
+}
+
+/*
+ * Function : generic_NCR5380_setup (char *str, int *ints)
+ *
+ * Purpose : LILO command line initialization of the overrides array,
+ *
+ * Inputs : str - unused, ints - array of integer parameters with ints[0]
+ * equal to the number of ints.
+ */
+
+void generic_NCR5380_setup (char *str, int *ints) {
+ internal_setup (BOARD_NCR5380, str, ints);
+}
+
+/*
+ * Function : generic_NCR53C400_setup (char *str, int *ints)
+ *
+ * Purpose : LILO command line initialization of the overrides array,
+ *
+ * Inputs : str - unused, ints - array of integer parameters with ints[0]
+ * equal to the number of ints.
+ */
+
+void generic_NCR53C400_setup (char *str, int *ints) {
+ internal_setup (BOARD_NCR53C400, str, ints);
+}
+
+/*
+ * Function : int generic_NCR5380_detect(Scsi_Host_Template * tpnt)
+ *
+ * Purpose : initializes generic NCR5380 driver based on the
+ * command line / compile time port and irq definitions.
+ *
+ * Inputs : tpnt - template for this SCSI adapter.
+ *
+ * Returns : 1 if a host adapter was found, 0 if not.
+ *
+ */
+
+int generic_NCR5380_detect(Scsi_Host_Template * tpnt) {
+ static int current_override = 0;
+ int count;
+ int flags = 0;
+ struct Scsi_Host *instance;
+
+ if (ncr_irq != NCR_NOT_SET)
+ overrides[0].irq=ncr_irq;
+ if (ncr_dma != NCR_NOT_SET)
+ overrides[0].dma=ncr_dma;
+ if (ncr_addr != NCR_NOT_SET)
+ overrides[0].NCR5380_map_name=(NCR5380_map_type)ncr_addr;
+ if (ncr_5380 != NCR_NOT_SET)
+ overrides[0].board=BOARD_NCR5380;
+ else if (ncr_53c400 != NCR_NOT_SET)
+ overrides[0].board=BOARD_NCR53C400;
+
+ tpnt->proc_dir = &proc_scsi_g_ncr5380;
+
+ for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
+ if (!(overrides[current_override].NCR5380_map_name))
+ continue;
+
+ switch (overrides[current_override].board) {
+ case BOARD_NCR5380:
+ flags = FLAG_NO_PSEUDO_DMA;
+ break;
+ case BOARD_NCR53C400:
+ flags = FLAG_NCR53C400;
+ break;
+ }
+
+ instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
+ instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
+
+ NCR5380_init(instance, flags);
+
+ if (overrides[current_override].irq != IRQ_AUTO)
+ instance->irq = overrides[current_override].irq;
+ else
+ instance->irq = NCR5380_probe_irq(instance, 0xffff);
+
+ if (instance->irq != IRQ_NONE)
+ if (request_irq(instance->irq, generic_NCR5380_intr, SA_INTERRUPT, "NCR5380", NULL)) {
+ printk("scsi%d : IRQ%d not free, interrupts disabled\n",
+ instance->host_no, instance->irq);
+ instance->irq = IRQ_NONE;
+ }
+
+ if (instance->irq == IRQ_NONE) {
+ printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
+ printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
+ }
+
+ printk("scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int)instance->NCR5380_instance_name);
+ if (instance->irq == IRQ_NONE)
+ printk (" interrupts disabled");
+ else
+ printk (" irq %d", instance->irq);
+ printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
+ CAN_QUEUE, CMD_PER_LUN, GENERIC_NCR5380_PUBLIC_RELEASE);
+ NCR5380_print_options(instance);
+ printk("\n");
+
+ ++current_override;
+ ++count;
+ }
+ return count;
+}
+
+const char * generic_NCR5380_info (struct Scsi_Host* host) {
+ static const char string[]="Generic NCR5380/53C400 Driver";
+ return string;
+}
+
+int generic_NCR5380_release_resources(struct Scsi_Host * instance)
+{
+ NCR5380_local_declare();
+
+ NCR5380_setup(instance);
+
+ if (instance->irq != IRQ_NONE)
+ free_irq(instance->irq, NULL);
+
+ return 0;
+}
+
+#ifdef BIOSPARAM
+/*
+ * Function : int generic_NCR5380_biosparam(Disk * disk, kdev_t dev, int *ip)
+ *
+ * Purpose : Generates a BIOS / DOS compatible H-C-S mapping for
+ * the specified device / size.
+ *
+ * Inputs : size = size of device in sectors (512 bytes), dev = block device
+ * major / minor, ip[] = {heads, sectors, cylinders}
+ *
+ * Returns : always 0 (success), initializes ip
+ *
+ */
+
+/*
+ * XXX Most SCSI boards use this mapping, I could be incorrect. Some one
+ * using hard disks on a trantor should verify that this mapping corresponds
+ * to that used by the BIOS / ASPI driver by running the linux fdisk program
+ * and matching the H_C_S coordinates to what DOS uses.
+ */
+
+int generic_NCR5380_biosparam(Disk * disk, kdev_t dev, int *ip)
+{
+ int size = disk->capacity;
+ ip[0] = 64;
+ ip[1] = 32;
+ ip[2] = size >> 11;
+ return 0;
+}
+#endif
+
+#if NCR53C400_PSEUDO_DMA
+static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst, int len)
+{
+ int blocks = len / 128;
+ int start = 0;
+ int i;
+ int bl;
+ NCR5380_local_declare();
+
+ NCR5380_setup(instance);
+
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ printk("53C400r: About to read %d blocks for %d bytes\n", blocks, len);
+#endif
+
+ NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
+ NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ while (1) {
+
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ printk("53C400r: %d blocks left\n", blocks);
+#endif
+
+ if ((bl=NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ if (blocks)
+ printk("53C400r: blocks still == %d\n", blocks);
+ else
+ printk("53C400r: Exiting loop\n");
+#endif
+ break;
+ }
+
+#if 1
+ if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ printk("53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
+ return -1;
+ }
+#endif
+
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ printk("53C400r: Waiting for buffer, bl=%d\n", bl);
+#endif
+
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ ;
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ printk("53C400r: Transferring 128 bytes\n");
+#endif
+
+#ifdef CONFIG_SCSI_G_NCR5380_PORT
+ for (i=0; i<128; i++)
+ dst[start+i] = NCR5380_read(C400_HOST_BUFFER);
+#else
+ /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ memmove(dst+start,NCR53C400_host_buffer+NCR5380_map_name,128);
+#endif
+ start+=128;
+ blocks--;
+ }
+
+ if (blocks) {
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ printk("53C400r: EXTRA: Waiting for buffer\n");
+#endif
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ ;
+
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ printk("53C400r: Transferring EXTRA 128 bytes\n");
+#endif
+#ifdef CONFIG_SCSI_G_NCR5380_PORT
+ for (i=0; i<128; i++)
+ dst[start+i] = NCR5380_read(C400_HOST_BUFFER);
+#else
+ /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ memmove(dst+start,NCR53C400_host_buffer+NCR5380_map_name,128);
+#endif
+ start+=128;
+ blocks--;
+ }
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ else
+ printk("53C400r: No EXTRA required\n");
+#endif
+
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ printk("53C400r: Final values: blocks=%d start=%d\n", blocks, start);
+#endif
+
+ if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ printk("53C400r: no 53C80 gated irq after transfer");
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ else
+ printk("53C400r: Got 53C80 interrupt and tried to clear it\n");
+#endif
+
+/* DON'T DO THIS - THEY NEVER ARRIVE!
+ printk("53C400r: Waiting for 53C80 registers\n");
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
+ ;
+*/
+
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
+ printk("53C400r: no end dma signal\n");
+#if (NDEBUG & NDEBUG_C400_PREAD)
+ else
+ printk("53C400r: end dma as expected\n");
+#endif
+
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ return 0;
+}
+
+static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src, int len)
+{
+ int blocks = len / 128;
+ int start = 0;
+ int i;
+ int bl;
+ NCR5380_local_declare();
+
+ NCR5380_setup(instance);
+
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: About to write %d blocks for %d bytes\n", blocks, len);
+#endif
+
+ NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
+ NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ while (1) {
+ if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ printk("53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
+ return -1;
+ }
+
+ if ((bl=NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ if (blocks)
+ printk("53C400w: exiting loop, blocks still == %d\n", blocks);
+ else
+ printk("53C400w: exiting loop\n");
+#endif
+ break;
+ }
+
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: %d blocks left\n", blocks);
+
+ printk("53C400w: waiting for buffer, bl=%d\n", bl);
+#endif
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ ;
+
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: transferring 128 bytes\n");
+#endif
+#ifdef CONFIG_SCSI_G_NCR5380_PORT
+ for (i=0; i<128; i++)
+ NCR5380_write(C400_HOST_BUFFER, src[start+i]);
+#else
+ /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ memmove(NCR53C400_host_buffer+NCR5380_map_name,src+start,128);
+#endif
+ start+=128;
+ blocks--;
+ }
+ if (blocks) {
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: EXTRA waiting for buffer\n");
+#endif
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ ;
+
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: transferring EXTRA 128 bytes\n");
+#endif
+#ifdef CONFIG_SCSI_G_NCR5380_PORT
+ for (i=0; i<128; i++)
+ NCR5380_write(C400_HOST_BUFFER, src[start+i]);
+#else
+ /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ memmove(NCR53C400_host_buffer+NCR5380_map_name,src+start,128);
+#endif
+ start+=128;
+ blocks--;
+ }
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ else
+ printk("53C400w: No EXTRA required\n");
+#endif
+
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: Final values: blocks=%d start=%d\n", blocks, start);
+#endif
+
+#if 0
+ printk("53C400w: waiting for registers to be available\n");
+ THEY NEVER DO!
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
+ ;
+ printk("53C400w: Got em\n");
+#endif
+
+ /* Let's wait for this instead - could be ugly */
+ /* All documentation says to check for this. Maybe my hardware is too
+ * fast. Waiting for it seems to work fine! KLL
+ */
+ while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ ;
+
+ /*
+ * I know. i is certainly != 0 here but the loop is new. See previous
+ * comment.
+ */
+ if (i) {
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: got 53C80 gated irq (last block)\n");
+#endif
+ if (!((i=NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER))
+ printk("53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n",i);
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ else
+ printk("53C400w: Got END OF DMA\n");
+#endif
+ }
+ else
+ printk("53C400w: no 53C80 gated irq after transfer (last block)\n");
+
+#if 0
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
+ printk("53C400w: no end dma signal\n");
+ }
+#endif
+
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: waiting for last byte...\n");
+#endif
+ while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
+ ;
+
+#if (NDEBUG & NDEBUG_C400_PWRITE)
+ printk("53C400w: got last byte.\n");
+ printk("53C400w: pwrite exiting with status 0, whoopee!\n");
+#endif
+ return 0;
+}
+#endif /* PSEUDO_DMA */
+
+#include "NCR5380.c"
+
+#define PRINTP(x) len += sprintf(buffer+len, x)
+#define ANDP ,
+
+static int sprint_opcode(char* buffer, int len, int opcode) {
+ int start = len;
+ PRINTP("0x%02x " ANDP opcode);
+ return len-start;
+}
+
+static int sprint_command (char* buffer, int len, unsigned char *command) {
+ int i,s,start=len;
+ len += sprint_opcode(buffer, len, command[0]);
+ for ( i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
+ PRINTP("%02x " ANDP command[i]);
+ PRINTP("\n");
+ return len-start;
+}
+
+static int sprint_Scsi_Cmnd (char* buffer, int len, Scsi_Cmnd *cmd) {
+ int start = len;
+ PRINTP("host number %d destination target %d, lun %d\n" ANDP
+ cmd->host->host_no ANDP
+ cmd->target ANDP
+ cmd->lun);
+ PRINTP(" command = ");
+ len += sprint_command (buffer, len, cmd->cmnd);
+ return len-start;
+}
+
+int generic_NCR5380_proc_info(char* buffer, char** start, off_t offset, int length, int hostno, int inout)
+{
+ int len = 0;
+ NCR5380_local_declare();
+ unsigned char status;
+ int i;
+ struct Scsi_Host *scsi_ptr;
+ Scsi_Cmnd *ptr;
+ Scsi_Device *dev;
+ struct NCR5380_hostdata *hostdata;
+
+ cli();
+
+ for (scsi_ptr = first_instance; scsi_ptr; scsi_ptr=scsi_ptr->next)
+ if (scsi_ptr->host_no == hostno)
+ break;
+ NCR5380_setup(scsi_ptr);
+ hostdata = (struct NCR5380_hostdata *)scsi_ptr->hostdata;
+
+ PRINTP("SCSI host number %d : %s\n" ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name);
+ PRINTP("Generic NCR5380 driver version %d\n" ANDP GENERIC_NCR5380_PUBLIC_RELEASE);
+ PRINTP("NCR5380 core version %d\n" ANDP NCR5380_PUBLIC_RELEASE);
+#ifdef NCR53C400
+ PRINTP("NCR53C400 extension version %d\n" ANDP NCR53C400_PUBLIC_RELEASE);
+ PRINTP("NCR53C400 card%s detected\n" ANDP (((struct NCR5380_hostdata *)scsi_ptr->hostdata)->flags & FLAG_NCR53C400)?"":" not");
+# if NCR53C400_PSEUDO_DMA
+ PRINTP("NCR53C400 pseudo DMA used\n");
+# endif
+#else
+ PRINTP("NO NCR53C400 driver extensions\n");
+#endif
+ PRINTP("Using %s mapping at %s 0x%x, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
+ if (scsi_ptr->irq == IRQ_NONE)
+ PRINTP("no interrupt\n");
+ else
+ PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq);
+
+#ifdef NCR5380_STATS
+ if (hostdata->connected || hostdata->issue_queue || hostdata->disconnected_queue)
+ PRINTP("There are commands pending, transfer rates may be crud\n");
+ if (hostdata->pendingr)
+ PRINTP(" %d pending reads" ANDP hostdata->pendingr);
+ if (hostdata->pendingw)
+ PRINTP(" %d pending writes" ANDP hostdata->pendingw);
+ if (hostdata->pendingr || hostdata->pendingw)
+ PRINTP("\n");
+ for (dev = scsi_devices; dev; dev=dev->next) {
+ if (dev->host == scsi_ptr) {
+ unsigned long br = hostdata->bytes_read[dev->id];
+ unsigned long bw = hostdata->bytes_write[dev->id];
+ long tr = hostdata->time_read[dev->id] / HZ;
+ long tw = hostdata->time_write[dev->id] / HZ;
+
+ PRINTP(" T:%d %s " ANDP dev->id ANDP (dev->type < MAX_SCSI_DEVICE_CODE) ? scsi_device_types[(int)dev->type] : "Unknown");
+ for (i=0; i<8; i++)
+ if (dev->vendor[i] >= 0x20)
+ *(buffer+(len++)) = dev->vendor[i];
+ *(buffer+(len++)) = ' ';
+ for (i=0; i<16; i++)
+ if (dev->model[i] >= 0x20)
+ *(buffer+(len++)) = dev->model[i];
+ *(buffer+(len++)) = ' ';
+ for (i=0; i<4; i++)
+ if (dev->rev[i] >= 0x20)
+ *(buffer+(len++)) = dev->rev[i];
+ *(buffer+(len++)) = ' ';
+
+ PRINTP("\n%10ld kb read in %5ld secs" ANDP br/1024 ANDP tr);
+ if (tr)
+ PRINTP(" @ %5ld bps" ANDP br / tr);
+
+ PRINTP("\n%10ld kb written in %5ld secs" ANDP bw/1024 ANDP tw);
+ if (tw)
+ PRINTP(" @ %5ld bps" ANDP bw / tw);
+ PRINTP("\n");
+ }
+ }
+#endif
+
+ status = NCR5380_read(STATUS_REG);
+ if (!(status & SR_REQ))
+ PRINTP("REQ not asserted, phase unknown.\n");
+ else {
+ for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
+ (phases[i].value != (status & PHASE_MASK)); ++i)
+ ;
+ PRINTP("Phase %s\n" ANDP phases[i].name);
+ }
+
+ if (!hostdata->connected) {
+ PRINTP("No currently connected command\n");
+ } else {
+ len += sprint_Scsi_Cmnd (buffer, len, (Scsi_Cmnd *) hostdata->connected);
+ }
+
+ PRINTP("issue_queue\n");
+
+ for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr;
+ ptr = (Scsi_Cmnd *) ptr->host_scribble)
+ len += sprint_Scsi_Cmnd (buffer, len, ptr);
+
+ PRINTP("disconnected_queue\n");
+
+ for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
+ ptr = (Scsi_Cmnd *) ptr->host_scribble)
+ len += sprint_Scsi_Cmnd (buffer, len, ptr);
+
+ *start = buffer + offset;
+ len -= offset;
+ if (len > length)
+ len = length;
+ sti();
+ return len;
+}
+
+#undef PRINTP
+#undef ANDP
+
+#ifdef MODULE
+/* Eventually this will go into an include file, but this will be later */
+Scsi_Host_Template driver_template = GENERIC_NCR5380;
+
+#include <linux/module.h>
+#include "scsi_module.c"
+#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-25 16:00:09 +0000