diff options
Diffstat (limited to 'linux/dev/drivers/block/ide.c')
| -rw-r--r-- | linux/dev/drivers/block/ide.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/linux/dev/drivers/block/ide.c b/linux/dev/drivers/block/ide.c index ee3c878..9444653 100644 --- a/linux/dev/drivers/block/ide.c +++ b/linux/dev/drivers/block/ide.c @@ -1606,7 +1606,7 @@ static inline void do_request (ide_hwif_t *hwif, struct request *rq) printk("%s: drive not ready for command\n", drive->name); return; } - + if (!drive->special.all) { if (rq->cmd == IDE_DRIVE_CMD) { execute_drive_cmd(drive, rq); @@ -1646,7 +1646,7 @@ static inline void do_request (ide_hwif_t *hwif, struct request *rq) #else do_rw_disk (drive, rq, block); /* simpler and faster */ return; -#endif /* CONFIG_BLK_DEV_IDEATAPI */; +#endif /* CONFIG_BLK_DEV_IDEATAPI */ } do_special(drive); return; @@ -1696,7 +1696,7 @@ void ide_do_request (ide_hwgroup_t *hwgroup) hwgroup->active = 0; return; /* no work left for this hwgroup */ } - got_rq: + got_rq: do_request(hwgroup->hwif = hwgroup->next_hwif = hwif, hwgroup->rq = rq); cli(); } while (hwgroup->handler == NULL); @@ -2429,7 +2429,7 @@ static inline void do_identify (ide_drive_t *drive, byte cmd) #if defined (CONFIG_SCSI_EATA_DMA) || defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA) /* - * EATA SCSI controllers do a hardware ATA emulation: + * EATA SCSI controllers do a hardware ATA emulation: * Ignore them if there is a driver for them available. */ if ((id->model[0] == 'P' && id->model[1] == 'M') @@ -3321,7 +3321,7 @@ done: * This routine is called from the partition-table code in genhd.c * to "convert" a drive to a logical geometry with fewer than 1024 cyls. * - * The second parameter, "xparm", determines exactly how the translation + * The second parameter, "xparm", determines exactly how the translation * will be handled: * 0 = convert to CHS with fewer than 1024 cyls * using the same method as Ontrack DiskManager. @@ -3329,7 +3329,7 @@ done: * -1 = similar to "0", plus redirect sector 0 to sector 1. * >1 = convert to a CHS geometry with "xparm" heads. * - * Returns 0 if the translation was not possible, if the device was not + * Returns 0 if the translation was not possible, if the device was not * an IDE disk drive, or if a geometry was "forced" on the commandline. * Returns 1 if the geometry translation was successful. */ @@ -3640,7 +3640,7 @@ static int hwif_init (int h) { ide_hwif_t *hwif = &ide_hwifs[h]; void (*rfn)(void); - + if (!hwif->present) return 0; if (!hwif->irq) { @@ -3655,7 +3655,7 @@ static int hwif_init (int h) return (hwif->present = 0); } #endif /* CONFIG_BLK_DEV_HD */ - + hwif->present = 0; /* we set it back to 1 if all is ok below */ switch (hwif->major) { case IDE0_MAJOR: rfn = &do_ide0_request; break; @@ -3710,7 +3710,7 @@ int ide_init (void) #ifdef CONFIG_BLK_DEV_IDETAPE idetape_register_chrdev(); /* Register character device interface to the ide tape */ #endif /* CONFIG_BLK_DEV_IDETAPE */ - + return 0; } |