summaryrefslogtreecommitdiff
path: root/i386
diff options
context:
space:
mode:
Diffstat (limited to 'i386')
-rw-r--r--i386/Makefrag.am (renamed from i386/Makefile.in)0
-rw-r--r--i386/linux/Makefile.in283
2 files changed, 0 insertions, 283 deletions
diff --git a/i386/Makefile.in b/i386/Makefrag.am
index dc5c661..dc5c661 100644
--- a/i386/Makefile.in
+++ b/i386/Makefrag.am
diff --git a/i386/linux/Makefile.in b/i386/linux/Makefile.in
deleted file mode 100644
index b13663f..0000000
--- a/i386/linux/Makefile.in
+++ /dev/null
@@ -1,283 +0,0 @@
-# Makefile for Linux device drivers and the glue codes.
-# Copyright 1998, 1999, 2006 Free Software Foundation, Inc.
-#
-# Permission to use, copy, modify and distribute this software and its
-# documentation is hereby granted, provided that both the copyright
-# notice and this permission notice appear in all copies of the
-# software, derivative works or modified versions, and any portions
-# thereof, and that both notices appear in supporting documentation.
-#
-# THE FREE SOFTWARE FOUNDATION ALLOWS FREE USE OF THIS SOFTWARE IN ITS
-# "AS IS" CONDITION. THE FREE SOFTWARE FOUNDATION DISCLAIMS ANY
-# LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE
-# USE OF THIS SOFTWARE.
-
-
-#
-# configure's findings.
-#
-
-srcdir = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-bootdir = $(exec_prefix)/boot
-datadir = @datadir@
-includedir = @includedir@
-infodir = @infodir@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-
-top_builddir = ../../
-sysdep=$(srcdir)/..
-linuxdir=../../linux
-linuxsrcdir=$(srcdir)/$(linuxdir)
-
-systype=@systype@
-device_drivers=@device_drivers@
-
-
-#
-# Default target
-#
-
-all:
-
-
-
-# Files for driver support.
-linux-c-files = version.c softirq.c delay.c dma.c resource.c printk.c \
- bios32.c irq.c ctype.c vsprintf.c main.c misc.c sched.c \
- kmem.c block.c setup.c
-
-# `dev' directory contains modified and glue source files.
-vpath %.c $(linuxsrcdir)/dev/kernel
-vpath %.c $(linuxsrcdir)/dev/init
-vpath %.c $(linuxsrcdir)/dev/arch/$(systype)/kernel
-vpath %.c $(linuxsrcdir)/dev/arch/$(systype)/lib
-vpath %.c $(linuxsrcdir)/dev/glue
-vpath %.c $(linuxsrcdir)/dev/lib
-
-# `src' directory contains original Linux source files.
-vpath %.c $(linuxsrcdir)/src/kernel
-vpath %.c $(linuxsrcdir)/src/init
-vpath %.c $(linuxsrcdir)/src/arch/$(systype)/kernel
-vpath %.c $(linuxsrcdir)/src/arch/$(systype)/lib
-vpath %.c $(linuxsrcdir)/src/lib
-
-
-# XXX: Assembly source files must be treated separately... Uggg...
-linux-asm-files = semaphore.S
-vpath %.S $(linuxsrcdir)/dev/arch/$(systype)/lib
-vpath %.S $(linuxsrcdir)/src/arch/$(systype)/lib
-
-
-# Linux device drivers.
-linux-block-files = cmd640.c floppy.c genhd.c ide-cd.c ide.c rz1000.c triton.c
-vpath %.c $(linuxsrcdir)/dev/drivers/block
-vpath %.c $(linuxsrcdir)/src/drivers/block
-
-linux-net-files = auto_irq.c 3c501.c 3c503.c 3c505.c 3c507.c 3c509.c \
- 3c59x.c 3c515.c 8390.c Space.c ac3200.c apricot.c at1700.c atp.c \
- de4x5.c de600.c de620.c depca.c dev.c e2100.c eepro.c eepro100.c \
- eexpress.c epic100.c eth16i.c ewrk3.c fmv18x.c hp-plus.c hp.c hp100.c \
- lance.c ne.c ne2k-pci.c net_init.c ni52.c ni65.c pcnet32.c rtl8139.c \
- seeq8005.c sk_g16.c smc-ultra.c smc-ultra32.c tlan.c tulip.c \
- via-rhine.c wavelan.c wd.c yellowfin.c znet.c \
- cb_shim.c hamachi.c intel-gige.c myson803.c natsemi.c ns820.c \
- starfire.c sundance.c winbond-840.c \
- pci-scan.c \
- net.c
-
-vpath %.c $(linuxsrcdir)/dev/drivers/net
-vpath %.c $(linuxsrcdir)/dev/net/core
-vpath %.c $(linuxsrcdir)/src/drivers/net
-vpath %.c $(linuxsrcdir)/src/net/core
-
-linux-pci-files = pci.c
-vpath %.c $(linuxsrcdir)/dev/drivers/pci
-vpath %.c $(linuxsrcdir)/src/drivers/pci
-
-linux-scsi-files = 53c78xx.c AM53C974.c BusLogic.c NCR53c406a.c advansys.c \
- aha152x.c aha1542.c aha1740.c aic7xxx.c constants.c dtc.c eata.c \
- eata_dma.c eata_pio.c fdomain.c g_NCR5380.c gdth.c hosts.c in2000.c \
- ncr53c8xx.c pas16.c ppa.c qlogicfas.c qlogicisp.c scsi.c scsi_ioctl.c \
- scsi_proc.c scsicam.c sd.c sd_ioctl.c seagate.c sr.c sr_ioctl.c \
- t128.c tmscsim.c u14-34f.c ultrastor.c wd7000.c
-vpath %.c $(linuxsrcdir)/dev/drivers/scsi
-vpath %.c $(linuxsrcdir)/src/drivers/scsi
-
-
-# pcmcia-cs.
-
-linux-pcmcia-cs-modules-files = pcmcia.c cs.c ds.c rsrc_mgr.c bulkmem.c \
- cistpl.c pci_fixup.c i82365.c
-vpath %.c $(linuxsrcdir)/pcmcia-cs/modules
-vpath %.c $(linuxsrcdir)/pcmcia-cs/glue
-
-linux-pcmcia-cs-clients-files = 3c574_cs.c 3c589_cs.c axnet_cs.c fmvj18x_cs.c \
- nmclan_cs.c pcnet_cs.c smc91c92_cs.c xirc2ps_cs.c
-vpath %.c $(linuxsrcdir)/pcmcia-cs/clients
-
-linux-pcmcia-cs-wireless-files = hermes.c orinoco.c orinoco_cs.c
-vpath %.c $(linuxsrcdir)/pcmcia-cs/wireless
-
-
-all-linux-files = $(linux-c-files) $(linux-block-files) \
- $(linux-net-files) $(linux-pci-files) $(linux-scsi-files) \
- $(linux-pcmcia-cs-modules-files) $(linux-pcmcia-cs-clients-files) \
- $(linux-pcmcia-cs-wireless-files)
-
-# These are always used.
-objfiles := $(subst .c,.o, $(linux-c-files) $(linux-pci-files)) genhd.o
-objfiles += $(subst .S,.o, $(linux-asm-files))
-
-# These files need special flags for compilation; each one will
-# have a variable like wd7000.c-linux-flags with those flags.
-CFLAGS = $($(<F)-linux-flags)
-ASFLAGS = $($(<F)-linux-flags)
-INCLUDES = \
- -I. -I.. -I$(srcdir)/.. -I../.. -I$(srcdir)/../.. \
- -I$(srcdir)/../../include -I$(srcdir)/../../bogus \
- -I$(srcdir)/../../util -I$(srcdir)/../../kern \
- -I$(srcdir)/../../device -I$(sysdep)/i386at -I$(sysdep)/i386 \
- -I$(sysdep)/include -I$(sysdep)/include/mach/sa -I$(sysdep)/bogus \
- -I$(sysdep)
-CPPFLAGS = -Wall
-
-# These flags are:
-# Instead of Mach's KERNEL, Linux uses __KERNEL__. Whee.
-# Arrange for special include directories too.
-# Because of the use of `extern inline' in some Linux header files without
-# corresponding text-segment definitions, we must always optimize.
-linux-gen-flags = -D__KERNEL__ -O2 -fno-strict-aliasing \
- -Idev/include -I$(srcdir)/dev/include \
- -I$(linuxdir)/dev/include -I$(linuxdir)/src/include \
- -I$(linuxsrcdir)/dev/include -I$(linuxsrcdir)/src/include
-linux-block-flags = -I$(linuxsrcdir)/dev/drivers/block \
- -I$(linuxsrcdir)/src/drivers/block
-linux-net-flags = -I$(linuxsrcdir)/dev/drivers/net \
- -I$(linuxsrcdir)/src/drivers/net
-linux-pci-flags = -I$(linuxsrcdir)/dev/drivers/pci \
- -I$(linuxsrcdir)/src/drivers/pci
-linux-scsi-flags = -I$(linuxsrcdir)/dev/drivers/scsi \
- -I$(linuxsrcdir)/src/drivers/scsi
-linux-pcmcia-cs-modules-flags = -I$(linuxsrcdir)/pcmcia-cs/include \
- -include $(linuxsrcdir)/pcmcia-cs/glue/pcmcia_glue.h
-linux-pcmcia-cs-clients-flags = -I$(linuxsrcdir)/pcmcia-cs/include \
- -DPCMCIA_CLIENT -include $(linuxsrcdir)/pcmcia-cs/glue/pcmcia_glue.h
-linux-pcmcia-cs-wireless-flags = -I$(linuxsrcdir)/pcmcia-cs/include \
- -include $(linuxsrcdir)/pcmcia-cs/glue/wireless_glue.h
-linux-asm-spec-flags = -D__KERNEL__ -D__ASSEMBLY__ -traditional \
- -Idev/include -I$(linuxdir)/dev/include -I$(linuxdir)/src/include \
- -I$(srcdir)/dev/include -I$(linuxsrcdir)/dev/include \
- -I$(linuxsrcdir)/src/include
-
-
-# Here is where those specs are found.
--include linux-flags
-
-# How to make this file:
-
-linux-flags: Makefile
- rm -f $@
- for i in $(linux-c-files); do \
- echo $$i-linux-flags '= $$(linux-gen-flags)' >> $@; \
- done
- for i in $(linux-block-files); do \
- echo $$i-linux-flags \
- '= $$(linux-gen-flags) $$(linux-block-flags)' >> $@; \
- done
- for i in $(linux-net-files); do \
- echo $$i-linux-flags \
- '= $$(linux-gen-flags) $$(linux-net-flags)' >> $@; \
- done
- for i in $(linux-pci-files); do \
- echo $$i-linux-flags \
- '= $$(linux-gen-flags) $$(linux-pci-flags)' >> $@; \
- done
- for i in $(linux-scsi-files); do \
- echo $$i-linux-flags \
- '= $$(linux-gen-flags) $$(linux-scsi-flags)' >> $@; \
- done
- for i in $(linux-pcmcia-cs-modules-files); do \
- echo $$i-linux-flags \
- '= $$(linux-pcmcia-cs-modules-flags) $$(linux-gen-flags)' >> $@; \
- done
- for i in $(linux-pcmcia-cs-clients-files); do \
- echo $$i-linux-flags \
- '= $$(linux-pcmcia-cs-clients-flags) $$(linux-gen-flags)' >>$@; \
- done
- for i in $(linux-pcmcia-cs-wireless-files); do \
- echo $$i-linux-flags \
- '= $$(linux-pcmcia-cs-wireless-flags) $$(linux-gen-flags)' >> $@; \
- done
- for i in $(linux-asm-files); do \
- echo $$i-linux-flags '= $$(linux-asm-spec-flags)' >> $@; \
- done
- echo 'linux-flags-done='$(all-linux-files) $(linux-asm-files) >> $@
-
-# If we haven't included `linux-flags' properly, then don't try and build
-# .d files.
-ifneq ($(linux-flags-done),$(all-linux-files) $(linux-asm-files))
-no_deps=t
-endif
-
-objfiles += $(sort $(device_drivers))
-
-
-
-# Autoconf support
-
-$(srcdir)/configure: $(srcdir)/configure.ac $(srcdir)/../../Drivers.macros
- cd $(srcdir) && autoconf
-
-Makefile device-drivers.h: %: $(srcdir)/%.in config.status
- ./config.status $@
-
-config.status: $(srcdir)/configure
- ./config.status --recheck
-
-vpath %.in $(srcdir)
-vpath configure $(srcdir)
-
-
-
-# Create a linuxdev object file.
-all: linux.o
-
-linux.o: $(objfiles) $(srcdir)/configure
- rm -f $@
- $(LD) -r -o $@ $(objfiles)
-
-check:
-
-install install-headers install-kernel:
-
-clean:
- rm -f linux.o
- rm -f linux-flags
- rm -f $(objfiles) $(subst .o,.d,$(objfiles))
-
-distclean: clean
- rm -f Makefile Makerules device-drivers.h
- rm -f config.status config.log
-
-mostlyclean: distclean
-
-maintainer-clean: mostlyclean
- rm -f $(srcdir)/configure
-
-
-#
-# Makerules
-#
-
-include $(top_builddir)/Makerules