diff options
Diffstat (limited to 'i386/linux')
| -rw-r--r-- | i386/linux/Makefile.in | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/i386/linux/Makefile.in b/i386/linux/Makefile.in deleted file mode 100644 index b13663f..0000000 --- a/i386/linux/Makefile.in +++ /dev/null @@ -1,283 +0,0 @@ -# Makefile for Linux device drivers and the glue codes. -# Copyright 1998, 1999, 2006 Free Software Foundation, Inc. -# -# Permission to use, copy, modify and distribute this software and its -# documentation is hereby granted, provided that both the copyright -# notice and this permission notice appear in all copies of the -# software, derivative works or modified versions, and any portions -# thereof, and that both notices appear in supporting documentation. -# -# THE FREE SOFTWARE FOUNDATION ALLOWS FREE USE OF THIS SOFTWARE IN ITS -# "AS IS" CONDITION. THE FREE SOFTWARE FOUNDATION DISCLAIMS ANY -# LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE -# USE OF THIS SOFTWARE. - - -# -# configure's findings. -# - -srcdir = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -bindir = @bindir@ -bootdir = $(exec_prefix)/boot -datadir = @datadir@ -includedir = @includedir@ -infodir = @infodir@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -oldincludedir = @oldincludedir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ - -top_builddir = ../../ -sysdep=$(srcdir)/.. -linuxdir=../../linux -linuxsrcdir=$(srcdir)/$(linuxdir) - -systype=@systype@ -device_drivers=@device_drivers@ - - -# -# Default target -# - -all: - - - -# Files for driver support. -linux-c-files = version.c softirq.c delay.c dma.c resource.c printk.c \ - bios32.c irq.c ctype.c vsprintf.c main.c misc.c sched.c \ - kmem.c block.c setup.c - -# `dev' directory contains modified and glue source files. -vpath %.c $(linuxsrcdir)/dev/kernel -vpath %.c $(linuxsrcdir)/dev/init -vpath %.c $(linuxsrcdir)/dev/arch/$(systype)/kernel -vpath %.c $(linuxsrcdir)/dev/arch/$(systype)/lib -vpath %.c $(linuxsrcdir)/dev/glue -vpath %.c $(linuxsrcdir)/dev/lib - -# `src' directory contains original Linux source files. -vpath %.c $(linuxsrcdir)/src/kernel -vpath %.c $(linuxsrcdir)/src/init -vpath %.c $(linuxsrcdir)/src/arch/$(systype)/kernel -vpath %.c $(linuxsrcdir)/src/arch/$(systype)/lib -vpath %.c $(linuxsrcdir)/src/lib - - -# XXX: Assembly source files must be treated separately... Uggg... -linux-asm-files = semaphore.S -vpath %.S $(linuxsrcdir)/dev/arch/$(systype)/lib -vpath %.S $(linuxsrcdir)/src/arch/$(systype)/lib - - -# Linux device drivers. -linux-block-files = cmd640.c floppy.c genhd.c ide-cd.c ide.c rz1000.c triton.c -vpath %.c $(linuxsrcdir)/dev/drivers/block -vpath %.c $(linuxsrcdir)/src/drivers/block - -linux-net-files = auto_irq.c 3c501.c 3c503.c 3c505.c 3c507.c 3c509.c \ - 3c59x.c 3c515.c 8390.c Space.c ac3200.c apricot.c at1700.c atp.c \ - de4x5.c de600.c de620.c depca.c dev.c e2100.c eepro.c eepro100.c \ - eexpress.c epic100.c eth16i.c ewrk3.c fmv18x.c hp-plus.c hp.c hp100.c \ - lance.c ne.c ne2k-pci.c net_init.c ni52.c ni65.c pcnet32.c rtl8139.c \ - seeq8005.c sk_g16.c smc-ultra.c smc-ultra32.c tlan.c tulip.c \ - via-rhine.c wavelan.c wd.c yellowfin.c znet.c \ - cb_shim.c hamachi.c intel-gige.c myson803.c natsemi.c ns820.c \ - starfire.c sundance.c winbond-840.c \ - pci-scan.c \ - net.c - -vpath %.c $(linuxsrcdir)/dev/drivers/net -vpath %.c $(linuxsrcdir)/dev/net/core -vpath %.c $(linuxsrcdir)/src/drivers/net -vpath %.c $(linuxsrcdir)/src/net/core - -linux-pci-files = pci.c -vpath %.c $(linuxsrcdir)/dev/drivers/pci -vpath %.c $(linuxsrcdir)/src/drivers/pci - -linux-scsi-files = 53c78xx.c AM53C974.c BusLogic.c NCR53c406a.c advansys.c \ - aha152x.c aha1542.c aha1740.c aic7xxx.c constants.c dtc.c eata.c \ - eata_dma.c eata_pio.c fdomain.c g_NCR5380.c gdth.c hosts.c in2000.c \ - ncr53c8xx.c pas16.c ppa.c qlogicfas.c qlogicisp.c scsi.c scsi_ioctl.c \ - scsi_proc.c scsicam.c sd.c sd_ioctl.c seagate.c sr.c sr_ioctl.c \ - t128.c tmscsim.c u14-34f.c ultrastor.c wd7000.c -vpath %.c $(linuxsrcdir)/dev/drivers/scsi -vpath %.c $(linuxsrcdir)/src/drivers/scsi - - -# pcmcia-cs. - -linux-pcmcia-cs-modules-files = pcmcia.c cs.c ds.c rsrc_mgr.c bulkmem.c \ - cistpl.c pci_fixup.c i82365.c -vpath %.c $(linuxsrcdir)/pcmcia-cs/modules -vpath %.c $(linuxsrcdir)/pcmcia-cs/glue - -linux-pcmcia-cs-clients-files = 3c574_cs.c 3c589_cs.c axnet_cs.c fmvj18x_cs.c \ - nmclan_cs.c pcnet_cs.c smc91c92_cs.c xirc2ps_cs.c -vpath %.c $(linuxsrcdir)/pcmcia-cs/clients - -linux-pcmcia-cs-wireless-files = hermes.c orinoco.c orinoco_cs.c -vpath %.c $(linuxsrcdir)/pcmcia-cs/wireless - - -all-linux-files = $(linux-c-files) $(linux-block-files) \ - $(linux-net-files) $(linux-pci-files) $(linux-scsi-files) \ - $(linux-pcmcia-cs-modules-files) $(linux-pcmcia-cs-clients-files) \ - $(linux-pcmcia-cs-wireless-files) - -# These are always used. -objfiles := $(subst .c,.o, $(linux-c-files) $(linux-pci-files)) genhd.o -objfiles += $(subst .S,.o, $(linux-asm-files)) - -# These files need special flags for compilation; each one will -# have a variable like wd7000.c-linux-flags with those flags. -CFLAGS = $($(<F)-linux-flags) -ASFLAGS = $($(<F)-linux-flags) -INCLUDES = \ - -I. -I.. -I$(srcdir)/.. -I../.. -I$(srcdir)/../.. \ - -I$(srcdir)/../../include -I$(srcdir)/../../bogus \ - -I$(srcdir)/../../util -I$(srcdir)/../../kern \ - -I$(srcdir)/../../device -I$(sysdep)/i386at -I$(sysdep)/i386 \ - -I$(sysdep)/include -I$(sysdep)/include/mach/sa -I$(sysdep)/bogus \ - -I$(sysdep) -CPPFLAGS = -Wall - -# These flags are: -# Instead of Mach's KERNEL, Linux uses __KERNEL__. Whee. -# Arrange for special include directories too. -# Because of the use of `extern inline' in some Linux header files without -# corresponding text-segment definitions, we must always optimize. -linux-gen-flags = -D__KERNEL__ -O2 -fno-strict-aliasing \ - -Idev/include -I$(srcdir)/dev/include \ - -I$(linuxdir)/dev/include -I$(linuxdir)/src/include \ - -I$(linuxsrcdir)/dev/include -I$(linuxsrcdir)/src/include -linux-block-flags = -I$(linuxsrcdir)/dev/drivers/block \ - -I$(linuxsrcdir)/src/drivers/block -linux-net-flags = -I$(linuxsrcdir)/dev/drivers/net \ - -I$(linuxsrcdir)/src/drivers/net -linux-pci-flags = -I$(linuxsrcdir)/dev/drivers/pci \ - -I$(linuxsrcdir)/src/drivers/pci -linux-scsi-flags = -I$(linuxsrcdir)/dev/drivers/scsi \ - -I$(linuxsrcdir)/src/drivers/scsi -linux-pcmcia-cs-modules-flags = -I$(linuxsrcdir)/pcmcia-cs/include \ - -include $(linuxsrcdir)/pcmcia-cs/glue/pcmcia_glue.h -linux-pcmcia-cs-clients-flags = -I$(linuxsrcdir)/pcmcia-cs/include \ - -DPCMCIA_CLIENT -include $(linuxsrcdir)/pcmcia-cs/glue/pcmcia_glue.h -linux-pcmcia-cs-wireless-flags = -I$(linuxsrcdir)/pcmcia-cs/include \ - -include $(linuxsrcdir)/pcmcia-cs/glue/wireless_glue.h -linux-asm-spec-flags = -D__KERNEL__ -D__ASSEMBLY__ -traditional \ - -Idev/include -I$(linuxdir)/dev/include -I$(linuxdir)/src/include \ - -I$(srcdir)/dev/include -I$(linuxsrcdir)/dev/include \ - -I$(linuxsrcdir)/src/include - - -# Here is where those specs are found. --include linux-flags - -# How to make this file: - -linux-flags: Makefile - rm -f $@ - for i in $(linux-c-files); do \ - echo $$i-linux-flags '= $$(linux-gen-flags)' >> $@; \ - done - for i in $(linux-block-files); do \ - echo $$i-linux-flags \ - '= $$(linux-gen-flags) $$(linux-block-flags)' >> $@; \ - done - for i in $(linux-net-files); do \ - echo $$i-linux-flags \ - '= $$(linux-gen-flags) $$(linux-net-flags)' >> $@; \ - done - for i in $(linux-pci-files); do \ - echo $$i-linux-flags \ - '= $$(linux-gen-flags) $$(linux-pci-flags)' >> $@; \ - done - for i in $(linux-scsi-files); do \ - echo $$i-linux-flags \ - '= $$(linux-gen-flags) $$(linux-scsi-flags)' >> $@; \ - done - for i in $(linux-pcmcia-cs-modules-files); do \ - echo $$i-linux-flags \ - '= $$(linux-pcmcia-cs-modules-flags) $$(linux-gen-flags)' >> $@; \ - done - for i in $(linux-pcmcia-cs-clients-files); do \ - echo $$i-linux-flags \ - '= $$(linux-pcmcia-cs-clients-flags) $$(linux-gen-flags)' >>$@; \ - done - for i in $(linux-pcmcia-cs-wireless-files); do \ - echo $$i-linux-flags \ - '= $$(linux-pcmcia-cs-wireless-flags) $$(linux-gen-flags)' >> $@; \ - done - for i in $(linux-asm-files); do \ - echo $$i-linux-flags '= $$(linux-asm-spec-flags)' >> $@; \ - done - echo 'linux-flags-done='$(all-linux-files) $(linux-asm-files) >> $@ - -# If we haven't included `linux-flags' properly, then don't try and build -# .d files. -ifneq ($(linux-flags-done),$(all-linux-files) $(linux-asm-files)) -no_deps=t -endif - -objfiles += $(sort $(device_drivers)) - - - -# Autoconf support - -$(srcdir)/configure: $(srcdir)/configure.ac $(srcdir)/../../Drivers.macros - cd $(srcdir) && autoconf - -Makefile device-drivers.h: %: $(srcdir)/%.in config.status - ./config.status $@ - -config.status: $(srcdir)/configure - ./config.status --recheck - -vpath %.in $(srcdir) -vpath configure $(srcdir) - - - -# Create a linuxdev object file. -all: linux.o - -linux.o: $(objfiles) $(srcdir)/configure - rm -f $@ - $(LD) -r -o $@ $(objfiles) - -check: - -install install-headers install-kernel: - -clean: - rm -f linux.o - rm -f linux-flags - rm -f $(objfiles) $(subst .o,.d,$(objfiles)) - -distclean: clean - rm -f Makefile Makerules device-drivers.h - rm -f config.status config.log - -mostlyclean: distclean - -maintainer-clean: mostlyclean - rm -f $(srcdir)/configure - - -# -# Makerules -# - -include $(top_builddir)/Makerules |