summaryrefslogtreecommitdiff
path: root/i386/README-Drivers
diff options
context:
space:
mode:
Diffstat (limited to 'i386/README-Drivers')
-rw-r--r--i386/README-Drivers328
1 files changed, 150 insertions, 178 deletions
diff --git a/i386/README-Drivers b/i386/README-Drivers
index ee3c8df..fa5fdfb 100644
--- a/i386/README-Drivers
+++ b/i386/README-Drivers
@@ -2,9 +2,19 @@
** Turning on or off device drivers
-Each device driver has an associated configure switch. The table at
-the end of this file gives the list of configure switches. For many
-devices there are multiple drivers to choose from.
+Each device driver has an associated configure switch. The table at the
+end of this file indicates whether a device driver is enabled by default
+or not. It also gives --- if possible at all --- the configure switches
+to use for disabling or enabling device drivers, in case you're not
+satisfied with the default choices. Where a `--disable-*' switch is
+given in the table, the device driver is enabled by default and you have
+to use the switch to disable it and vice versa for the `--enable-*'
+switches, the device driver is disabled by default and you have to us the
+switch to enable it. To have all device drivers disabled that can be
+disabled and would otherwise have been enabled by default you can specify
+the `--disable-default-device-drivers' switch and then use the
+`--enable-*' switches to enable only those you actually want to have
+enabled.
** What the configure switches do
@@ -26,12 +36,15 @@ are believed to work.
** Then comes the name of the device to users. %d is a unit number.
-***
+** Source files
-All source file names are relative to .../gnumach/i386/i386at for Mach
-drivers, and .../gnumach/linux/src/drivers for Linux drivers.
+All source file names are relative to [GNU Mach]/i386/i386at/ for
+Mach drivers, and the Linux drivers's files can be found below
+[GNU Mach]/linux/.
+** Table
+
*** Serial devices and similar equivalents
PC com ports (always enabled)
@@ -39,7 +52,7 @@ PC com ports (always enabled)
com%d
Parallel port
- --enable-lpr lpr.c
+ --disable-lpr lpr.c
lpr%d
System Console (always enabled)
@@ -66,267 +79,228 @@ Interface to setting up IO port access for users (always enabled)
iopl%d
-
*** Disk controllers (except for SCSI)
PC floppy
- --enable-floppy block/floppy.c
+ --disable-floppy block/floppy.c
0x3f0, 370
fd%d
IDE disks
- --enable-ide block/{cmd640,ide-cd,ide,rz1000,triton}.c
+ --disable-ide block/{cmd640,ide-cd,ide,rz1000,triton}.c
hd%d (disks)
wcd%d (cdroms)
-*** SCSI disks Disks all show up as `sd%d'. CD Roms all show up as
-`cd%d'. Tapes and generic are not currently supported.
+*** SCSI disks
+
+Disks all show up as `sd%d'. CD Roms all show up as `cd%d'. Tapes and
+generic are not currently supported.
AdvanSys
- --enable-advansys scsi/advansys.c
+ --disable-advansys scsi/advansys.c
BusLogic
- --enable-buslogic scsi/{BusLogic,FlashPoint}.c
- --disable-flashpoint (if you want to omit FlashPoint support)
+ --disable-BusLogic scsi/{BusLogic,FlashPoint}.c
+ --enable-flashpoint (if you want to omit FlashPoint support)
UltraStor 14F/34F
- --enable-u1434f scsi/u14-34f.c
+ --disable-u1434f scsi/u14-34f.c
UlstraStor
- --enable-ultrastor scsi/ultrastor.c
+ --disable-ultrastor scsi/ultrastor.c
-Adaptec AHA-152x/2825
- --enable-aha152x scsi/aha152x.c
- --enable-aha2825
+Adaptec AHA-152x/2825 (aha152x, aha2825)
+ --disable-aha152x scsi/aha152x.c
Adaptec AHA-1542
- --enable-aha1542 scsi/aha1540.c
+ --disable-aha1542 scsi/aha1540.c
Adaptec AHA-1740
- --enable-aha1740 scsi/aha1740.c
+ --disable-aha1740 scsi/aha1740.c
Adaptec AIC7xxx
- --enable-aic7xxx scsi/aic7xxx.c
+ --disable-aic7xxx scsi/aic7xxx.c
Future Domain 16xx
- --enable-futuredomain scsi/fdomain.c
+ --disable-fdomain scsi/fdomain.c
Always IN 2000
- --enable-in2000 scsi/in2000.c
+ --disable-in2000 scsi/in2000.c
-Generic NCR5380/53c400
- --enable-ncr5380 scsi/g_NCR5380.c
- --enable-ncr53c400
+Generic NCR5380/53c400 (ncr5380, ncr53c400)
+ --enable-g_NCR5380 scsi/g_NCR5380.c
NCR53c406a chip
- --enable-ncr53c406a scsi/NCR53c406a.c
+ --enable-NCR53c406a scsi/NCR53c406a.c
-PAS16 scsi/pas16.c
- --enable-pas16
+PAS16
+ --disable-pas16 scsi/pas16.c
Seagate ST02, Future Domain TMC-8xx
- --enable-seagate scsi/seagate.c
+ --disable-seagate scsi/seagate.c
-Trantor T128/T128F/T228
- --enable-t128 scsi/t128.c
- --enable-t128f
- --enable-t228
+Trantor T128/T128F/T228 (t128, t128f, t228)
+ --disable-t128 scsi/t128.c
NCR 53C7,8xx
- --enable-ncr53c7xx scsi/53c78xx.c
+ --disable-ncr53c78xx scsi/53c78xx.c
EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix)
- --enable-eatadma scsi/eata_dma.c
+ --enable-eata_dma scsi/eata_dma.c
EATA-PIO (old DPT PM2001, PM2012A)
- --enable-eatapio scsi/eata_pio.c
+ --disable-eata_pio scsi/eata_pio.c
WD 7000
- --enable-wd7000 scsi/wd7000.c
+ --disable-wd7000 scsi/wd7000.c
EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards)
- --enable-eata scsi/eata.c
+ --disable-eata scsi/eata.c
-AM53/79C974
- --enable-am53c974 scsi/AM53C974.c
- --enable-am79c974
+AM53/79C974 (am53c974, am79c974)
+ --disable-AM53C974 scsi/AM53C974.c
-DTC3180/3280
- --enable-dtc3280 scsi/dtc.c
- --enable-dtc3180
+DTC3180/3280 (dtc3180, dtc3280)
+ --disable-dtc scsi/dtc.c
-NCR53C8XX
- --enable-ncr53c8xx scsi/ncr53c8xx.c
- --enable-dc390w
- --enable-dc390u
- --enable-dc390f
+NCR53C8XX (ncr53c8xx, dc390f, dc390u, dc390w)
+ --disable-ncr53c8xx scsi/ncr53c8xx.c
-Tekram DC-390(T)
- --enable-dc390t scsi/tmscsim.c
- --enable-dc390
+Tekram DC-390(T) (dc390, dc390t)
+ --disable-tmscsim scsi/tmscsim.c
IOMEGA Parallel Port ZIP drive
- --enable-ppa scsi/ppa.c
+ --disable-ppa scsi/ppa.c
Qlogic FAS
- --enable-qlogicfas scsi/qlogicfas.c
+ --disable-qlogicfas scsi/qlogicfas.c
Qlogic ISP
- --enable-qlogicisp scsi/qlogicisp.c
+ --disable-qlogicisp scsi/qlogicisp.c
GDT SCSI Disk Array Controller
- --enable-gdth scsi/gdth.c
+ --disable-gdth scsi/gdth.c
*** Ethernet controllers
These all show up as `eth%d' except the atp device.
-NE2000/NE1000 ISA
- --enable-ne2000 net/ne.c 8390.c
- --enable-ne1000
+NE2000/NE1000 ISA (ne, ne1000, ne2000)
+ --disable-ne net/ne.c 8390.c
0x300,280,320,340,360
-3Com 503 (Etherlink II)
- --enable-3c503 net/3c503.c net/8390.c
- --enable-el2
+3Com 503 (3c503) / Etherlink II
+ --disable-3c503 net/3c503.c net/8390.c
0x300,310,330,350,250,280,2a0,2e0
-3Com 509/579 (Etherlink III)
- --enable-3c509 net/3c509.c
- --enable-3c579
- --enable-el3
+3Com 509/579 (3c509, 3c579) / Etherlink III
+ --disable-3c509 net/3c509.c
-WD80*3
- --enable-wd80x3 net/wd.c, net/8390.c
+WD80x3
+ --disable-wd net/wd.c, net/8390.c
0x300,280,380,240
-3COM 501
- --enable-3c501 net/3c501.c
- --enable-el1
- 0x280, 300
+3COM 501 (3c501) / Etherlink I
+ --disable-3c501 net/3c501.c
+ 0x280,300
SMC Ultra
- --enable-ul net/smc-ultra.c net/8390.c
+ --disable-smcultra net/smc-ultra.c net/8390.c
0x200,220,240,280,300,340,380
SMC Ultra32
- --enable-ul32 net/smc-ultra32.c net/8390.c
+ --disable-smcultra32 net/smc-ultra32.c net/8390.c
HP PCLAN+ (27247B and 27252A)
- --enable-hplanplus net/hp-plus.c net/8390.c
+ --disable-hpplus net/hp-plus.c net/8390.c
0x200,240,280,2c0,300,320,340
HP PCLAN (27245 and other 27xxx series)
- --enable-hplan net/hp.c, net/8390.c
+ --disable-hp net/hp.c, net/8390.c
0x300,320,340,280,2c0,200,240
-3Com 590/900 series (592/595/597/900/905) "Vortex/Boomerang"
- --enable-3c59x
- --enable-3c90x
- --enable-vortex net/3c59x.c
+3Com 59x/90x (3c59x, 3c590, 3c592, 3c595, 3c597, 3c90x, 3c900, 3c905) "Vortex/Boomerang"
+ --disable-3c59x net/3c59x.c
Seeq8005
- --enable-seeq8005 net/seeq8005.c
+ --disable-seeq8005 net/seeq8005.c
0x300,320,340,360
-HP 10/100VG PCLAN (ISA, EISA, PCI)
- --enable-hp100 net/hp100.c
- --enable-hpj2577
- --enable-hpj2573
- --enable-hp27248b
- --enable-hp2585
+HP 10/100VG PCLAN (ISA, EISA, PCI) (hp100, hpj2577, hpj2573, hpj2585, hp27248b)
+ --disable-hp100 net/hp100.c
Ansel Communications EISA 3200
- --enable-ac3200 net/ac3200.c, net/8390.c
+ --disable-ac3200 net/ac3200.c, net/8390.c
Cabletron E21xx
- --enable-e2100 net/e2100.c, net/8390.c
+ --disable-e2100 net/e2100.c, net/8390.c
0x300,280,380,220
AT1700 (Fujitsu 86965)
- --enable-at1700 net/at1700.c
+ --disable-at1700 net/at1700.c
0x260,280,2a0,240,340,320,380,300
-ICL EtherTeam 16i/32
- --enable-eth16i net/eth16i.c
- --enable-eth32
+ICL EtherTeam 16i/32 (eth16i, eth32)
+ --disable-eth16i net/eth16i.c
0x260,280,2a0,240,340,320,380,300 (16i)
-Zenith Z-Note
- --enable-znet net/znet.c
- --enable-znote
+Zenith Z-Note (znet, znote)
+ --disable-znet net/znet.c
EtherExpress 16
- --enable-eexpress net/eexpress.c
+ --disable-eexpress net/eexpress.c
0x300,270,320,340
EtherExpressPro
- --enable-eexpresspro net/eepro.c
+ --disable-eepro net/eepro.c
0x200,240,280,2c0,300,320,340,360
Intel EtherExpressPro PCI 10+/100B/100+
- --enable-eexpresspro100 net/eepro100.c
-
-DEPCA, DE10x, DE200, DE201, DE202, DE210, DE422
- --enable-depca net/depca.c
- --enable-de100
- --enable-de101
- --enable-de200
- --enable-de201
- --enable-de202
- --enable-de210
- --enable-de422
-
-EtherWORKS 3 (DE203, DE204, DE205)
- --enable-ewrk3 net/ewrk3.c
- --enable-de203
- --enable-de204
- --enable-de205
-
-DE425, DE434, DE435, DE450, DE500
- --enable-de4x5 net/de4x5.c
- --enable-de425
- --enable-de434
- --enable-de435
- --enable-de450
- --enable-de500
+ --disable-eepro100 net/eepro100.c
+
+DEPCA (de100, de101, de200, de201, de202, de210, de422)
+ --disable-depca net/depca.c
+
+EtherWORKS 3 (ewrk3, de203, de204, de205)
+ --disable-ewrk3 net/ewrk3.c
+
+DE4x5 (de4x5, de425, de434, de435, de450, de500)
+ --disable-de4x5 net/de4x5.c
Apricot XEN-II on board ethernet
- --enable-apricot net/apricot.c
+ --disable-apricot net/apricot.c
AT&T WaveLAN & DEC RoamAbout DS
--enable-wavelan net/wavelan.c
0x390
-3Com 507
- --enable-3c507 net/3c507.c
- --enable-el16
+3Com 507 (3c507, el16)
+ --disable-3c507 net/3c507.c
0x300,320,340,280
-3Com 505
- --enable-3c505 net/3c505.c
- --enable-elplus
+3Com 505 (3c505, elplus)
+ --disable-3c505 net/3c505.c
0x300,280,310
D-Link DE-600
- --enable-de600 net/de600.c
+ --disable-de600 net/de600.c
0x378
D-Link DE-620
- --enable-de620 net/de620.c
+ --disable-de620 net/de620.c
0x378
Schneider & Koch G16
- --enable-skg16 net/sk_g16.c
+ --disable-sk_g16 net/sk_g16.c
0x100,180,208,220,288,320,328,390
NI5210
- --enable-ni52 net/ni52.c
+ --disable-ni52 net/ni52.c
0x300,280,360,320,340
NI6510
- --enable-ni65 net/ni65.c
+ --disable-ni65 net/ni65.c
0x300/320/340/360
AT-LAN-TEC/RealTek pocket adaptor
@@ -334,101 +308,99 @@ AT-LAN-TEC/RealTek pocket adaptor
0x378,278,3bc
atp%d
-AMD LANCE and PCnet (AT1500 and NE2100)
- --enable-lance net/lance.c
- --enable-at1500
- --enable-ne2100
+AMD LANCE and PCnet (at1500, ne2100)
+ --disable-lance net/lance.c
-DECchip Tulip (dc21x4x) PCI
- --enable-elcp net/tulip.c
- --enable-tulip
+DECchip Tulip (dc21x4x) PCI (elcp, tulip)
+ --disable-tulip net/tulip.c
FMV-181/182/183/184
- --enable-fmv18x net/fmv18x.c
+ --disable-fmv18x net/fmv18x.c
3Com 515 ISA Fast EtherLink
- --enable-3c515 net/3c515.c
+ --disable-3c515 net/3c515.c
AMD PCI PCnet32 (PCI bus NE2100 cards)
- --enable-pcnet32 net/pcnet32.c
+ --disable-pcnet32 net/pcnet32.c
PCI NE2000
- --enable-ne2kpci net/ne2k-pci.c
+ --disable-ne2kpci net/ne2k-pci.c
Packet Engines Yellowfin Gigabit-NIC
- --enable-yellowfin net/yellowfin.c
+ --disable-yellowfin net/yellowfin.c
-RealTek 8129/8139 (not 8019/8029!)
- --enable-rtl8139 net/rtl8139.c
- --enable-rtl8129
+RealTek 8129/8139 (rtl8129, rtl8139) (not 8019/8029!)
+ --disable-rtl8139 net/rtl8139.c
-SMC 83c170/175 EPIC/100 (EtherPower II)
- --enable-epic net/epic100.c
- --enable-epic100
+SMC 83c170/175 EPIC/100 (epic, epic100) / EtherPower II
+ --disable-epic100 net/epic100.c
TI ThunderLAN
- --enable-tlan net/tlan.c
+ --disable-tlan net/tlan.c
VIA Rhine
- --enable-viarhine net/via_rhine.c
+ --disable-viarhine net/via-rhine.c
Packet Engines "Hamachi" GNIC-2 Gigabit Ethernet
- --enable-hamachi net/hamachi.c
+ --disable-hamachi net/hamachi.c
Intel PCI Gigabit Ethernet
- --enable-intel-gige net/intel-gige.c
+ --disable-intelgige net/intel-gige.c
Myson MTD803 Ethernet adapter series
- --enable-myson803 net/myson803.c
+ --disable-myson803 net/myson803.c
National Semiconductor DP8381x series PCI Ethernet
- --enable-natsemi net/natsemi.c
+ --disable-natsemi net/natsemi.c
National Semiconductor DP8382x series PCI Ethernet
- --enable-ns820 net/ns820.c
+ --disable-ns820 net/ns820.c
Adaptec Starfire network adapter
- --enable-starfire net/starfire.c
+ --disable-starfire net/starfire.c
Sundance ST201 "Alta" PCI Ethernet
- --enable-sundance net/sundance.c
+ --disable-sundance net/sundance.c
Winbond W89c840 PCI Ethernet
- --enable-winbond-840 net/winbond-840.c
+ --disable-winbond840 net/winbond-840.c
*** pcmcia bridge drivers
-All source files are relative to .../gnumach/linux/pcmcia-cs.
+
+All source files are relative to [GNU Mach]/linux/pcmcia-cs.
Intel 82365 PC Card controller
- --enable-i82365 modules/i82365.c
+ --disable-i82365 modules/i82365.c
*** pcmcia device drivers
+
These all show up as `eth%d'.
-All source files are relative to .../gnumach/linux/pcmcia-cs.
+
+All source files are relative to [GNU Mach]/linux/pcmcia-cs.
3Com 3c574 ``RoadRunner'' PCMCIA Ethernet
- --enable-3c574_cs clients/3c574_cs.c
+ --disable-3c574_cs clients/3c574_cs.c
3Com 3c589 PCMCIA Ethernet card
- --enable-3c589_cs clients/3c589_cs.c
+ --disable-3c589_cs clients/3c589_cs.c
Asix AX88190-based PCMCIA Ethernet adapters
- --enable-axnet_cs clients/axnet_cs.c
+ --disable-axnet_cs clients/axnet_cs.c
fmvj18x chipset based PCMCIA Ethernet cards
- --enable-fmvj18x_cs clients/fmvj18x_cs.c
+ --disable-fmvj18x_cs clients/fmvj18x_cs.c
New Media Ethernet LAN PCMCIA cards
- --enable-nmclan_cs clients/nmclan_cs.c
+ --disable-nmclan_cs clients/nmclan_cs.c
NS8390-based PCMCIA cards
- --enable-pcnet_cs clients/pcnet_cs.c
+ --disable-pcnet_cs clients/pcnet_cs.c
SMC91c92-based PCMCIA cards
- --enable-smc91c92_cs clients/smc91c92_cs.c
+ --disable-smc91c92_cs clients/smc91c92_cs.c
Xircom CreditCard and Realport PCMCIA ethernet
- --enable-xirc2ps_cs clients/xirc2ps_cs.c
+ --disable-xirc2ps_cs clients/xirc2ps_cs.c
Hermes or Prism 2 PCMCIA Wireless adapters (Orinoco)
- --enable-orinoco_cs wireless/orinoco_cs.c
+ --disable-orinoco_cs wireless/orinoco_cs.c