diff options
Diffstat (limited to 'i386/README-Drivers')
| -rw-r--r-- | i386/README-Drivers | 328 |
1 files changed, 150 insertions, 178 deletions
diff --git a/i386/README-Drivers b/i386/README-Drivers index ee3c8df..fa5fdfb 100644 --- a/i386/README-Drivers +++ b/i386/README-Drivers @@ -2,9 +2,19 @@ ** Turning on or off device drivers -Each device driver has an associated configure switch. The table at -the end of this file gives the list of configure switches. For many -devices there are multiple drivers to choose from. +Each device driver has an associated configure switch. The table at the +end of this file indicates whether a device driver is enabled by default +or not. It also gives --- if possible at all --- the configure switches +to use for disabling or enabling device drivers, in case you're not +satisfied with the default choices. Where a `--disable-*' switch is +given in the table, the device driver is enabled by default and you have +to use the switch to disable it and vice versa for the `--enable-*' +switches, the device driver is disabled by default and you have to us the +switch to enable it. To have all device drivers disabled that can be +disabled and would otherwise have been enabled by default you can specify +the `--disable-default-device-drivers' switch and then use the +`--enable-*' switches to enable only those you actually want to have +enabled. ** What the configure switches do @@ -26,12 +36,15 @@ are believed to work. ** Then comes the name of the device to users. %d is a unit number. -*** +** Source files -All source file names are relative to .../gnumach/i386/i386at for Mach -drivers, and .../gnumach/linux/src/drivers for Linux drivers. +All source file names are relative to [GNU Mach]/i386/i386at/ for +Mach drivers, and the Linux drivers's files can be found below +[GNU Mach]/linux/. +** Table + *** Serial devices and similar equivalents PC com ports (always enabled) @@ -39,7 +52,7 @@ PC com ports (always enabled) com%d Parallel port - --enable-lpr lpr.c + --disable-lpr lpr.c lpr%d System Console (always enabled) @@ -66,267 +79,228 @@ Interface to setting up IO port access for users (always enabled) iopl%d - *** Disk controllers (except for SCSI) PC floppy - --enable-floppy block/floppy.c + --disable-floppy block/floppy.c 0x3f0, 370 fd%d IDE disks - --enable-ide block/{cmd640,ide-cd,ide,rz1000,triton}.c + --disable-ide block/{cmd640,ide-cd,ide,rz1000,triton}.c hd%d (disks) wcd%d (cdroms) -*** SCSI disks Disks all show up as `sd%d'. CD Roms all show up as -`cd%d'. Tapes and generic are not currently supported. +*** SCSI disks + +Disks all show up as `sd%d'. CD Roms all show up as `cd%d'. Tapes and +generic are not currently supported. AdvanSys - --enable-advansys scsi/advansys.c + --disable-advansys scsi/advansys.c BusLogic - --enable-buslogic scsi/{BusLogic,FlashPoint}.c - --disable-flashpoint (if you want to omit FlashPoint support) + --disable-BusLogic scsi/{BusLogic,FlashPoint}.c + --enable-flashpoint (if you want to omit FlashPoint support) UltraStor 14F/34F - --enable-u1434f scsi/u14-34f.c + --disable-u1434f scsi/u14-34f.c UlstraStor - --enable-ultrastor scsi/ultrastor.c + --disable-ultrastor scsi/ultrastor.c -Adaptec AHA-152x/2825 - --enable-aha152x scsi/aha152x.c - --enable-aha2825 +Adaptec AHA-152x/2825 (aha152x, aha2825) + --disable-aha152x scsi/aha152x.c Adaptec AHA-1542 - --enable-aha1542 scsi/aha1540.c + --disable-aha1542 scsi/aha1540.c Adaptec AHA-1740 - --enable-aha1740 scsi/aha1740.c + --disable-aha1740 scsi/aha1740.c Adaptec AIC7xxx - --enable-aic7xxx scsi/aic7xxx.c + --disable-aic7xxx scsi/aic7xxx.c Future Domain 16xx - --enable-futuredomain scsi/fdomain.c + --disable-fdomain scsi/fdomain.c Always IN 2000 - --enable-in2000 scsi/in2000.c + --disable-in2000 scsi/in2000.c -Generic NCR5380/53c400 - --enable-ncr5380 scsi/g_NCR5380.c - --enable-ncr53c400 +Generic NCR5380/53c400 (ncr5380, ncr53c400) + --enable-g_NCR5380 scsi/g_NCR5380.c NCR53c406a chip - --enable-ncr53c406a scsi/NCR53c406a.c + --enable-NCR53c406a scsi/NCR53c406a.c -PAS16 scsi/pas16.c - --enable-pas16 +PAS16 + --disable-pas16 scsi/pas16.c Seagate ST02, Future Domain TMC-8xx - --enable-seagate scsi/seagate.c + --disable-seagate scsi/seagate.c -Trantor T128/T128F/T228 - --enable-t128 scsi/t128.c - --enable-t128f - --enable-t228 +Trantor T128/T128F/T228 (t128, t128f, t228) + --disable-t128 scsi/t128.c NCR 53C7,8xx - --enable-ncr53c7xx scsi/53c78xx.c + --disable-ncr53c78xx scsi/53c78xx.c EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix) - --enable-eatadma scsi/eata_dma.c + --enable-eata_dma scsi/eata_dma.c EATA-PIO (old DPT PM2001, PM2012A) - --enable-eatapio scsi/eata_pio.c + --disable-eata_pio scsi/eata_pio.c WD 7000 - --enable-wd7000 scsi/wd7000.c + --disable-wd7000 scsi/wd7000.c EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) - --enable-eata scsi/eata.c + --disable-eata scsi/eata.c -AM53/79C974 - --enable-am53c974 scsi/AM53C974.c - --enable-am79c974 +AM53/79C974 (am53c974, am79c974) + --disable-AM53C974 scsi/AM53C974.c -DTC3180/3280 - --enable-dtc3280 scsi/dtc.c - --enable-dtc3180 +DTC3180/3280 (dtc3180, dtc3280) + --disable-dtc scsi/dtc.c -NCR53C8XX - --enable-ncr53c8xx scsi/ncr53c8xx.c - --enable-dc390w - --enable-dc390u - --enable-dc390f +NCR53C8XX (ncr53c8xx, dc390f, dc390u, dc390w) + --disable-ncr53c8xx scsi/ncr53c8xx.c -Tekram DC-390(T) - --enable-dc390t scsi/tmscsim.c - --enable-dc390 +Tekram DC-390(T) (dc390, dc390t) + --disable-tmscsim scsi/tmscsim.c IOMEGA Parallel Port ZIP drive - --enable-ppa scsi/ppa.c + --disable-ppa scsi/ppa.c Qlogic FAS - --enable-qlogicfas scsi/qlogicfas.c + --disable-qlogicfas scsi/qlogicfas.c Qlogic ISP - --enable-qlogicisp scsi/qlogicisp.c + --disable-qlogicisp scsi/qlogicisp.c GDT SCSI Disk Array Controller - --enable-gdth scsi/gdth.c + --disable-gdth scsi/gdth.c *** Ethernet controllers These all show up as `eth%d' except the atp device. -NE2000/NE1000 ISA - --enable-ne2000 net/ne.c 8390.c - --enable-ne1000 +NE2000/NE1000 ISA (ne, ne1000, ne2000) + --disable-ne net/ne.c 8390.c 0x300,280,320,340,360 -3Com 503 (Etherlink II) - --enable-3c503 net/3c503.c net/8390.c - --enable-el2 +3Com 503 (3c503) / Etherlink II + --disable-3c503 net/3c503.c net/8390.c 0x300,310,330,350,250,280,2a0,2e0 -3Com 509/579 (Etherlink III) - --enable-3c509 net/3c509.c - --enable-3c579 - --enable-el3 +3Com 509/579 (3c509, 3c579) / Etherlink III + --disable-3c509 net/3c509.c -WD80*3 - --enable-wd80x3 net/wd.c, net/8390.c +WD80x3 + --disable-wd net/wd.c, net/8390.c 0x300,280,380,240 -3COM 501 - --enable-3c501 net/3c501.c - --enable-el1 - 0x280, 300 +3COM 501 (3c501) / Etherlink I + --disable-3c501 net/3c501.c + 0x280,300 SMC Ultra - --enable-ul net/smc-ultra.c net/8390.c + --disable-smcultra net/smc-ultra.c net/8390.c 0x200,220,240,280,300,340,380 SMC Ultra32 - --enable-ul32 net/smc-ultra32.c net/8390.c + --disable-smcultra32 net/smc-ultra32.c net/8390.c HP PCLAN+ (27247B and 27252A) - --enable-hplanplus net/hp-plus.c net/8390.c + --disable-hpplus net/hp-plus.c net/8390.c 0x200,240,280,2c0,300,320,340 HP PCLAN (27245 and other 27xxx series) - --enable-hplan net/hp.c, net/8390.c + --disable-hp net/hp.c, net/8390.c 0x300,320,340,280,2c0,200,240 -3Com 590/900 series (592/595/597/900/905) "Vortex/Boomerang" - --enable-3c59x - --enable-3c90x - --enable-vortex net/3c59x.c +3Com 59x/90x (3c59x, 3c590, 3c592, 3c595, 3c597, 3c90x, 3c900, 3c905) "Vortex/Boomerang" + --disable-3c59x net/3c59x.c Seeq8005 - --enable-seeq8005 net/seeq8005.c + --disable-seeq8005 net/seeq8005.c 0x300,320,340,360 -HP 10/100VG PCLAN (ISA, EISA, PCI) - --enable-hp100 net/hp100.c - --enable-hpj2577 - --enable-hpj2573 - --enable-hp27248b - --enable-hp2585 +HP 10/100VG PCLAN (ISA, EISA, PCI) (hp100, hpj2577, hpj2573, hpj2585, hp27248b) + --disable-hp100 net/hp100.c Ansel Communications EISA 3200 - --enable-ac3200 net/ac3200.c, net/8390.c + --disable-ac3200 net/ac3200.c, net/8390.c Cabletron E21xx - --enable-e2100 net/e2100.c, net/8390.c + --disable-e2100 net/e2100.c, net/8390.c 0x300,280,380,220 AT1700 (Fujitsu 86965) - --enable-at1700 net/at1700.c + --disable-at1700 net/at1700.c 0x260,280,2a0,240,340,320,380,300 -ICL EtherTeam 16i/32 - --enable-eth16i net/eth16i.c - --enable-eth32 +ICL EtherTeam 16i/32 (eth16i, eth32) + --disable-eth16i net/eth16i.c 0x260,280,2a0,240,340,320,380,300 (16i) -Zenith Z-Note - --enable-znet net/znet.c - --enable-znote +Zenith Z-Note (znet, znote) + --disable-znet net/znet.c EtherExpress 16 - --enable-eexpress net/eexpress.c + --disable-eexpress net/eexpress.c 0x300,270,320,340 EtherExpressPro - --enable-eexpresspro net/eepro.c + --disable-eepro net/eepro.c 0x200,240,280,2c0,300,320,340,360 Intel EtherExpressPro PCI 10+/100B/100+ - --enable-eexpresspro100 net/eepro100.c - -DEPCA, DE10x, DE200, DE201, DE202, DE210, DE422 - --enable-depca net/depca.c - --enable-de100 - --enable-de101 - --enable-de200 - --enable-de201 - --enable-de202 - --enable-de210 - --enable-de422 - -EtherWORKS 3 (DE203, DE204, DE205) - --enable-ewrk3 net/ewrk3.c - --enable-de203 - --enable-de204 - --enable-de205 - -DE425, DE434, DE435, DE450, DE500 - --enable-de4x5 net/de4x5.c - --enable-de425 - --enable-de434 - --enable-de435 - --enable-de450 - --enable-de500 + --disable-eepro100 net/eepro100.c + +DEPCA (de100, de101, de200, de201, de202, de210, de422) + --disable-depca net/depca.c + +EtherWORKS 3 (ewrk3, de203, de204, de205) + --disable-ewrk3 net/ewrk3.c + +DE4x5 (de4x5, de425, de434, de435, de450, de500) + --disable-de4x5 net/de4x5.c Apricot XEN-II on board ethernet - --enable-apricot net/apricot.c + --disable-apricot net/apricot.c AT&T WaveLAN & DEC RoamAbout DS --enable-wavelan net/wavelan.c 0x390 -3Com 507 - --enable-3c507 net/3c507.c - --enable-el16 +3Com 507 (3c507, el16) + --disable-3c507 net/3c507.c 0x300,320,340,280 -3Com 505 - --enable-3c505 net/3c505.c - --enable-elplus +3Com 505 (3c505, elplus) + --disable-3c505 net/3c505.c 0x300,280,310 D-Link DE-600 - --enable-de600 net/de600.c + --disable-de600 net/de600.c 0x378 D-Link DE-620 - --enable-de620 net/de620.c + --disable-de620 net/de620.c 0x378 Schneider & Koch G16 - --enable-skg16 net/sk_g16.c + --disable-sk_g16 net/sk_g16.c 0x100,180,208,220,288,320,328,390 NI5210 - --enable-ni52 net/ni52.c + --disable-ni52 net/ni52.c 0x300,280,360,320,340 NI6510 - --enable-ni65 net/ni65.c + --disable-ni65 net/ni65.c 0x300/320/340/360 AT-LAN-TEC/RealTek pocket adaptor @@ -334,101 +308,99 @@ AT-LAN-TEC/RealTek pocket adaptor 0x378,278,3bc atp%d -AMD LANCE and PCnet (AT1500 and NE2100) - --enable-lance net/lance.c - --enable-at1500 - --enable-ne2100 +AMD LANCE and PCnet (at1500, ne2100) + --disable-lance net/lance.c -DECchip Tulip (dc21x4x) PCI - --enable-elcp net/tulip.c - --enable-tulip +DECchip Tulip (dc21x4x) PCI (elcp, tulip) + --disable-tulip net/tulip.c FMV-181/182/183/184 - --enable-fmv18x net/fmv18x.c + --disable-fmv18x net/fmv18x.c 3Com 515 ISA Fast EtherLink - --enable-3c515 net/3c515.c + --disable-3c515 net/3c515.c AMD PCI PCnet32 (PCI bus NE2100 cards) - --enable-pcnet32 net/pcnet32.c + --disable-pcnet32 net/pcnet32.c PCI NE2000 - --enable-ne2kpci net/ne2k-pci.c + --disable-ne2kpci net/ne2k-pci.c Packet Engines Yellowfin Gigabit-NIC - --enable-yellowfin net/yellowfin.c + --disable-yellowfin net/yellowfin.c -RealTek 8129/8139 (not 8019/8029!) - --enable-rtl8139 net/rtl8139.c - --enable-rtl8129 +RealTek 8129/8139 (rtl8129, rtl8139) (not 8019/8029!) + --disable-rtl8139 net/rtl8139.c -SMC 83c170/175 EPIC/100 (EtherPower II) - --enable-epic net/epic100.c - --enable-epic100 +SMC 83c170/175 EPIC/100 (epic, epic100) / EtherPower II + --disable-epic100 net/epic100.c TI ThunderLAN - --enable-tlan net/tlan.c + --disable-tlan net/tlan.c VIA Rhine - --enable-viarhine net/via_rhine.c + --disable-viarhine net/via-rhine.c Packet Engines "Hamachi" GNIC-2 Gigabit Ethernet - --enable-hamachi net/hamachi.c + --disable-hamachi net/hamachi.c Intel PCI Gigabit Ethernet - --enable-intel-gige net/intel-gige.c + --disable-intelgige net/intel-gige.c Myson MTD803 Ethernet adapter series - --enable-myson803 net/myson803.c + --disable-myson803 net/myson803.c National Semiconductor DP8381x series PCI Ethernet - --enable-natsemi net/natsemi.c + --disable-natsemi net/natsemi.c National Semiconductor DP8382x series PCI Ethernet - --enable-ns820 net/ns820.c + --disable-ns820 net/ns820.c Adaptec Starfire network adapter - --enable-starfire net/starfire.c + --disable-starfire net/starfire.c Sundance ST201 "Alta" PCI Ethernet - --enable-sundance net/sundance.c + --disable-sundance net/sundance.c Winbond W89c840 PCI Ethernet - --enable-winbond-840 net/winbond-840.c + --disable-winbond840 net/winbond-840.c *** pcmcia bridge drivers -All source files are relative to .../gnumach/linux/pcmcia-cs. + +All source files are relative to [GNU Mach]/linux/pcmcia-cs. Intel 82365 PC Card controller - --enable-i82365 modules/i82365.c + --disable-i82365 modules/i82365.c *** pcmcia device drivers + These all show up as `eth%d'. -All source files are relative to .../gnumach/linux/pcmcia-cs. + +All source files are relative to [GNU Mach]/linux/pcmcia-cs. 3Com 3c574 ``RoadRunner'' PCMCIA Ethernet - --enable-3c574_cs clients/3c574_cs.c + --disable-3c574_cs clients/3c574_cs.c 3Com 3c589 PCMCIA Ethernet card - --enable-3c589_cs clients/3c589_cs.c + --disable-3c589_cs clients/3c589_cs.c Asix AX88190-based PCMCIA Ethernet adapters - --enable-axnet_cs clients/axnet_cs.c + --disable-axnet_cs clients/axnet_cs.c fmvj18x chipset based PCMCIA Ethernet cards - --enable-fmvj18x_cs clients/fmvj18x_cs.c + --disable-fmvj18x_cs clients/fmvj18x_cs.c New Media Ethernet LAN PCMCIA cards - --enable-nmclan_cs clients/nmclan_cs.c + --disable-nmclan_cs clients/nmclan_cs.c NS8390-based PCMCIA cards - --enable-pcnet_cs clients/pcnet_cs.c + --disable-pcnet_cs clients/pcnet_cs.c SMC91c92-based PCMCIA cards - --enable-smc91c92_cs clients/smc91c92_cs.c + --disable-smc91c92_cs clients/smc91c92_cs.c Xircom CreditCard and Realport PCMCIA ethernet - --enable-xirc2ps_cs clients/xirc2ps_cs.c + --disable-xirc2ps_cs clients/xirc2ps_cs.c Hermes or Prism 2 PCMCIA Wireless adapters (Orinoco) - --enable-orinoco_cs wireless/orinoco_cs.c + --disable-orinoco_cs wireless/orinoco_cs.c |