diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/mach.info | 175 | ||||
| -rw-r--r-- | doc/mach.info-1 | 6683 | ||||
| -rw-r--r-- | doc/mach.info-2 | 1663 | ||||
| -rw-r--r-- | doc/stamp-vti | 4 |
4 files changed, 8525 insertions, 0 deletions
diff --git a/doc/mach.info b/doc/mach.info new file mode 100644 index 0000000..c2100e5 --- /dev/null +++ b/doc/mach.info @@ -0,0 +1,175 @@ +This is ../doc/mach.info, produced by makeinfo version 4.8 from +../doc/mach.texi. + +INFO-DIR-SECTION Kernel +START-INFO-DIR-ENTRY +* GNUMach: (mach). Using and programming the GNU Mach microkernel. +END-INFO-DIR-ENTRY + + This file documents the GNU Mach microkernel. + + This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach +Reference Manual', for Version 1.3.99. + + Copyright (C) 2001 Free Software Foundation, Inc. + + Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.1 or +any later version published by the Free Software Foundation; with the +Invariant Sections being "Free Software Needs Free Documentation" and +"GNU Lesser General Public License", the Front-Cover texts being (a) +(see below), and with the Back-Cover Texts being (b) (see below). A +copy of the license is included in the section entitled "GNU Free +Documentation License". + + (a) The FSF's Front-Cover Text is: + + A GNU Manual + + (b) The FSF's Back-Cover Text is: + + You have freedom to copy and modify this GNU Manual, like GNU +software. Copies published by the Free Software Foundation raise +funds for GNU development. + + This work is based on manual pages under the following copyright and +license: + +Mach Operating System +Copyright (C) 1991,1990 Carnegie Mellon University +All Rights Reserved. + + Permission to use, copy, modify and distribute this software and its +documentation is hereby granted, provided that both the copyright +notice and this permission notice appear in all copies of the software, +derivative works or modified versions, and any portions thereof, and +that both notices appear in supporting documentation. + + CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" +CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY +DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. + + +Indirect: +mach.info-1: 1914 +mach.info-2: 296589 + +Tag Table: +(Indirect) +Node: Top1914 +Node: Introduction10176 +Node: Audience11007 +Node: Features12042 +Node: Overview13869 +Node: History15062 +Node: Installing15207 +Node: Binary Distributions16431 +Node: Compilation17240 +Node: Configuration18219 +Node: Cross-Compilation31019 +Node: Bootstrap31800 +Ref: Bootstrap-Footnote-132243 +Node: Bootloader32480 +Ref: Bootloader-Footnote-133781 +Node: Modules33863 +Node: Inter Process Communication34668 +Node: Major Concepts35291 +Node: Messaging Interface39096 +Node: Mach Message Call39826 +Node: Message Format43141 +Node: Exchanging Port Rights53602 +Ref: Exchanging Port Rights-Footnote-159168 +Node: Memory59341 +Ref: Memory-Footnote-162435 +Node: Message Send62777 +Ref: Message Send-Footnote-169803 +Node: Message Receive70085 +Ref: Message Receive-Footnote-178722 +Node: Atomicity79003 +Node: Port Manipulation Interface81776 +Node: Port Creation83252 +Node: Port Destruction88038 +Node: Port Names91181 +Node: Port Rights95419 +Node: Ports and other Tasks99216 +Node: Receive Rights103308 +Node: Port Sets108478 +Node: Request Notifications110881 +Node: Virtual Memory Interface115668 +Node: Memory Allocation116921 +Node: Memory Deallocation119446 +Node: Data Transfer120907 +Node: Memory Attributes124432 +Node: Mapping Memory Objects133844 +Node: Memory Statistics137133 +Node: External Memory Management138693 +Node: Memory Object Server139398 +Node: Memory Object Creation142107 +Node: Memory Object Termination146113 +Node: Memory Objects and Data149051 +Node: Memory Object Locking166200 +Node: Memory Object Attributes172093 +Node: Default Memory Manager177933 +Node: Threads and Tasks183654 +Node: Thread Interface183991 +Node: Thread Creation184992 +Node: Thread Termination186109 +Node: Thread Information186580 +Node: Thread Settings192652 +Node: Thread Execution193886 +Node: Scheduling201180 +Node: Thread Priority201535 +Node: Hand-Off Scheduling204174 +Node: Scheduling Policy209166 +Node: Thread Special Ports210499 +Node: Exceptions212945 +Node: Task Interface213824 +Node: Task Creation214836 +Node: Task Termination216171 +Node: Task Information216773 +Node: Task Execution223289 +Node: Task Special Ports227702 +Node: Syscall Emulation231555 +Node: Profiling232782 +Node: Host Interface236540 +Node: Host Ports237525 +Node: Host Information239598 +Node: Host Time244971 +Node: Host Reboot247630 +Node: Processors and Processor Sets248180 +Node: Processor Set Interface249158 +Node: Processor Set Ports249925 +Node: Processor Set Access250760 +Node: Processor Set Creation253023 +Node: Processor Set Destruction254050 +Node: Tasks and Threads on Sets254971 +Node: Processor Set Priority260145 +Node: Processor Set Policy261435 +Node: Processor Set Info263048 +Node: Processor Interface266851 +Node: Hosted Processors267576 +Node: Processor Control268567 +Node: Processors and Sets270033 +Node: Processor Info271914 +Node: Device Interface274650 +Node: Device Reply Server276265 +Node: Device Open277557 +Node: Device Close279677 +Node: Device Read280256 +Node: Device Write283175 +Node: Device Map285980 +Node: Device Status286876 +Node: Device Filter288049 +Node: Kernel Debugger292885 +Node: Operation293612 +Node: Commands296589 +Node: Variables309812 +Node: Expressions311199 +Node: Copying312548 +Node: Documentation License331757 +Node: Free Documentation License332345 +Node: CMU License352244 +Node: Concept Index353475 +Node: Function and Data Index357317 + +End Tag Table diff --git a/doc/mach.info-1 b/doc/mach.info-1 new file mode 100644 index 0000000..a1bb76c --- /dev/null +++ b/doc/mach.info-1 @@ -0,0 +1,6683 @@ +This is ../doc/mach.info, produced by makeinfo version 4.8 from +../doc/mach.texi. + +INFO-DIR-SECTION Kernel +START-INFO-DIR-ENTRY +* GNUMach: (mach). Using and programming the GNU Mach microkernel. +END-INFO-DIR-ENTRY + + This file documents the GNU Mach microkernel. + + This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach +Reference Manual', for Version 1.3.99. + + Copyright (C) 2001 Free Software Foundation, Inc. + + Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.1 or +any later version published by the Free Software Foundation; with the +Invariant Sections being "Free Software Needs Free Documentation" and +"GNU Lesser General Public License", the Front-Cover texts being (a) +(see below), and with the Back-Cover Texts being (b) (see below). A +copy of the license is included in the section entitled "GNU Free +Documentation License". + + (a) The FSF's Front-Cover Text is: + + A GNU Manual + + (b) The FSF's Back-Cover Text is: + + You have freedom to copy and modify this GNU Manual, like GNU +software. Copies published by the Free Software Foundation raise +funds for GNU development. + + This work is based on manual pages under the following copyright and +license: + +Mach Operating System +Copyright (C) 1991,1990 Carnegie Mellon University +All Rights Reserved. + + Permission to use, copy, modify and distribute this software and its +documentation is hereby granted, provided that both the copyright +notice and this permission notice appear in all copies of the software, +derivative works or modified versions, and any portions thereof, and +that both notices appear in supporting documentation. + + CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" +CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY +DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. + + +File: mach.info, Node: Top, Next: Introduction, Up: (dir) + +Main Menu +********* + +This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach +Reference Manual', for Version 1.3.99 of the GNU Mach microkernel. + +* Menu: + +* Introduction:: How to use this manual. +* Installing:: Setting up GNU Mach on your computer. +* Bootstrap:: Running GNU Mach on your machine. +* Inter Process Communication:: Communication between process. +* Virtual Memory Interface:: Allocating and deallocating virtual memory. +* External Memory Management:: Handling memory pages in user space. +* Threads and Tasks:: Handling of threads and tasks. +* Host Interface:: Interface to a Mach host. +* Processors and Processor Sets:: Handling processors and sets of processors. +* Device Interface:: Accesing kernel devices. +* Kernel Debugger:: How to use the built-in kernel debugger. + +Appendices + +* Copying:: The GNU General Public License says how you + can copy and share the GNU Mach microkernel. +* Documentation License:: This manual is under the GNU Free + Documentation License. + +Indices + +* Concept Index:: Index of concepts and programs. +* Function and Data Index:: Index of functions, variables and data types. + + + --- The Detailed Node Listing --- + +Introduction + +* Audience:: The people for whom this manual is written. +* Features:: Reasons to install and use GNU Mach. +* Overview:: Basic architecture of the Mach microkernel. +* History:: The story about Mach. + +Installing + +* Binary Distributions:: Obtaining ready-to-run GNU distributions. +* Compilation:: Building GNU Mach from its source code. +* Configuration:: Configuration options at compilation time. +* Cross-Compilation:: Building GNU Mach from another system. + +Bootstrap + +* Bootloader:: Starting the microkernel, or other OSes. +* Modules:: Starting the first task of the OS. + +Inter Process Communication + +* Major Concepts:: The concepts behind the Mach IPC system. +* Messaging Interface:: Composing, sending and receiving messages. +* Port Manipulation Interface:: Manipulating ports, port rights, port sets. + +Messaging Interface + +* Mach Message Call:: Sending and receiving messages. +* Message Format:: The format of Mach messages. +* Exchanging Port Rights:: Sending and receiving port rights. +* Memory:: Passing memory regions in messages. +* Message Send:: Sending messages. +* Message Receive:: Receiving messages. +* Atomicity:: Atomicity of port rights. + +Port Manipulation Interface + +* Port Creation:: How to create new ports and port sets. +* Port Destruction:: How to destroy ports and port sets. +* Port Names:: How to query and manipulate port names. +* Port Rights:: How to work with port rights. +* Ports and other Tasks:: How to move rights between tasks. +* Receive Rights:: How to work with receive rights. +* Port Sets:: How to work with port sets. +* Request Notifications:: How to request notifications for events. + +Virtual Memory Interface + +* Memory Allocation:: Allocation of new virtual memory. +* Memory Deallocation:: Freeing unused virtual memory. +* Data Transfer:: Reading, writing and copying memory. +* Memory Attributes:: Tweaking memory regions. +* Mapping Memory Objects:: How to map memory objects. +* Memory Statistics:: How to get statistics about memory usage. + +External Memory Management + +* Memory Object Server:: The basics of external memory management. +* Memory Object Creation:: How new memory objects are created. +* Memory Object Termination:: How memory objects are terminated. +* Memory Objects and Data:: Data transfer to and from memory objects. +* Memory Object Locking:: How memory objects are locked. +* Memory Object Attributes:: Manipulating attributes of memory objects. +* Default Memory Manager:: Setting and using the default memory manager. + +Threads and Tasks + +* Thread Interface:: Manipulating threads. +* Task Interface:: Manipulating tasks. +* Profiling:: Profiling threads and tasks. + +Thread Interface + +* Thread Creation:: Creating threads. +* Thread Termination:: Terminating threads. +* Thread Information:: How to get informations on threads. +* Thread Settings:: How to set threads related informations. +* Thread Execution:: How to control the thread's machine state. +* Scheduling:: Operations on thread scheduling. +* Thread Special Ports:: How to handle the thread's special ports. +* Exceptions:: Managing exceptions. + +Scheduling + +* Thread Priority:: Changing the priority of a thread. +* Hand-Off Scheduling:: Switch to a new thread. +* Scheduling Policy:: Setting the scheduling policy. + +Task Interface + +* Task Creation:: Creating tasks. +* Task Termination:: Terminating tasks. +* Task Information:: Informations on tasks. +* Task Execution:: Thread scheduling in a task. +* Task Special Ports:: How to get and set the task's special ports. +* Syscall Emulation:: How to emulate system calls. + +Host Interface + +* Host Ports:: Ports representing a host. +* Host Information:: Query information about a host. +* Host Time:: Functions to query manipulate the host time. +* Host Reboot:: Rebooting the system. + +Processors and Processor Sets + +* Processor Set Interface:: How to work with processor sets. +* Processor Interface:: How to work with individual processors. + +Processor Set Interface + +* Processor Set Ports:: Ports representing a processor set. +* Processor Set Access:: How the processor sets are accessed. +* Processor Set Creation:: How new processor sets are created. +* Processor Set Destruction:: How processor sets are destroyed. +* Tasks and Threads on Sets:: Assigning tasks or threads to processor sets. +* Processor Set Priority:: Specifying the priority of a processor set. +* Processor Set Policy:: Changing the processor set policies. +* Processor Set Info:: Obtaining information about a processor set. + +Processor Interface + +* Hosted Processors:: Getting a list of all processors on a host. +* Processor Control:: Starting, stopping, controlling processors. +* Processors and Sets:: Combining processors into processor sets. +* Processor Info:: Obtaining information on processors. + +Device Interface + +* Device Open:: Opening hardware devices. +* Device Close:: Closing hardware devices. +* Device Read:: Reading data from the device. +* Device Write:: Writing data to the device. +* Device Map:: Mapping devices into virtual memory. +* Device Status:: Querying and manipulating a device. +* Device Filter:: Filtering packets arriving on a device. + +Kernel Debugger + +* Operation:: Basic architecture of the kernel debugger. +* Commands:: Available commands in the kernel debugger. +* Variables:: Access of variables from the kernel debugger. +* Expressions:: Usage of expressions in the kernel debugger. + +Documentation License + +* Free Documentation License:: The GNU Free Documentation License. +* CMU License:: The CMU license applies to the original Mach + kernel and its documentation. + + +File: mach.info, Node: Introduction, Next: Installing, Prev: Top, Up: Top + +1 Introduction +************** + +GNU Mach is the microkernel of the GNU Project. It is the base of the +operating system, and provides its functionality to the Hurd servers, +the GNU C Library and all user applications. The microkernel itself +does not provide much functionality of the system, just enough to make +it possible for the Hurd servers and the C library to implement the +missing features you would expect from a POSIX compatible operating +system. + +* Menu: + +* Audience:: The people for whom this manual is written. +* Features:: Reasons to install and use GNU Mach. +* Overview:: Basic architecture of the Mach microkernel. +* History:: The story about Mach. + + +File: mach.info, Node: Audience, Next: Features, Up: Introduction + +1.1 Audience +============ + +This manual is designed to be useful to everybody who is interested in +using, administering, or programming the Mach microkernel. + + If you are an end-user and you are looking for help on running the +Mach kernel, the first few chapters of this manual describe the +essential parts of installing and using the kernel in the GNU operating +system. + + The rest of this manual is a technical discussion of the Mach +programming interface and its implementation, and would not be helpful +until you want to learn how to extend the system or modify the kernel. + + This manual is organized according to the subsystems of Mach, and +each chapter begins with descriptions of conceptual ideas that are +related to that subsystem. If you are a programmer and want to learn +more about, say, the Mach IPC subsystem, you can skip to the IPC chapter +(*note Inter Process Communication::), and read about the related +concepts and interface definitions. + + +File: mach.info, Node: Features, Next: Overview, Prev: Audience, Up: Introduction + +1.2 Features +============ + +GNU Mach is not the most advanced microkernel known to the planet, nor +is it the fastest or smallest, but it has a rich set of interfaces and +some features which make it useful as the base of the Hurd system. + +it's free software + Anybody can use, modify, and redistribute it under the terms of + the GNU General Public License (*note Copying::). GNU Mach is + part of the GNU system, which is a complete operating system + licensed under the GPL. + +it's built to survive + As a microkernel, GNU Mach doesn't implement a lot of the features + commonly found in an operating system, but only the bare minimum + that is required to implement a full operating system on top of it. + This means that a lot of the operating system code is maintained + outside of GNU Mach, and while this code may go through a complete + redesign, the code of the microkernel can remain comparatively + stable. + +it's scalable + Mach is particularly well suited for SMP and network cluster + techniques. Thread support is provided at the kernel level, and + the kernel itself takes advantage of that. Network transparency + at the IPC level makes resources of the system available across + machine boundaries (with NORMA IPC, currently not available in GNU + Mach). + +it exists + The Mach microkernel is real software that works Right Now. It is + not a research or a proposal. You don't have to wait at all + before you can start using and developing it. Mach has been used + in many operating systems in the past, usually as the base for a + single UNIX server. In the GNU system, Mach is the base of a + functional multi-server operating system, the Hurd. + + +File: mach.info, Node: Overview, Next: History, Prev: Features, Up: Introduction + +1.3 Overview +============ + +An operating system kernel provides a framework for programs to share a +computer's hardware resources securely and efficiently. This requires +that the programs are seperated and protected from each other. To make +running multiple programs in parallel useful, there also needs to be a +facility for programs to exchange information by communication. + + The Mach microkernel provides abstractions of the underlying hardware +resources like devices and memory. It organizes the running programs +into tasks and threads (points of execution in the tasks). In addition, +Mach provides a rich interface for inter-process communication. + + What Mach does not provide is a POSIX compatible programming +interface. In fact, it has no understanding of file systems, POSIX +process semantics, network protocols and many more. All this is +implemented in tasks running on top of the microkernel. In the GNU +operating system, the Hurd servers and the C library share the +responsibility to implement the POSIX interface, and the additional +interfaces which are specific to the GNU system. + + +File: mach.info, Node: History, Prev: Overview, Up: Introduction + +1.4 History +=========== + +XXX A few lines about the history of Mach here. + + +File: mach.info, Node: Installing, Next: Bootstrap, Prev: Introduction, Up: Top + +2 Installing +************ + +Before you can use the Mach microkernel in your system you'll need to +install it and all components you want to use with it, e.g. the rest of +the operating system. You also need a bootloader to load the kernel +from the storage medium and run it when the computer is started. + + GNU Mach is only available for Intel i386-compatible architectures +(such as the Pentium) currently. If you have a different architecture +and want to run the GNU Mach microkernel, you will need to port the +kernel and all other software of the system to your machine's +architecture. Porting is an involved process which requires +considerable programming skills, and it is not recommended for the +faint-of-heart. If you have the talent and desire to do a port, contact +<bug-hurd@gnu.org> in order to coordinate the effort. + +* Menu: + +* Binary Distributions:: Obtaining ready-to-run GNU distributions. +* Compilation:: Building GNU Mach from its source code. +* Configuration:: Configuration options at compile time. +* Cross-Compilation:: Building GNU Mach from another system. + + +File: mach.info, Node: Binary Distributions, Next: Compilation, Up: Installing + +2.1 Binary Distributions +======================== + +By far the easiest and best way to install GNU Mach and the operating +system is to obtain a GNU binary distribution. The GNU operating +system consists of GNU Mach, the Hurd, the C library and many +applications. Without the GNU operating system, you will only have a +microkernel, which is not very useful by itself, without the other +programs. + + Building the whole operating system takes a huge effort, and you are +well advised to not do it yourself, but to get a binary distribution of +the GNU operating system. The distribution also includes a binary of +the GNU Mach microkernel. + + Information on how to obtain the GNU system can be found in the Hurd +info manual. + + +File: mach.info, Node: Compilation, Next: Configuration, Prev: Binary Distributions, Up: Installing + +2.2 Compilation +=============== + +If you already have a running GNU system, and only want to recompile +the kernel, for example to select a different set of included hardware +drivers, you can easily do this. You need the GNU C compiler and MiG, +the Mach interface generator, which both come in their own packages. + + Building and installing the kernel is as easy as with any other GNU +software package. The configure script is used to configure the source +and set the compile time options. The compilation is done by running: + + make + + To install the kernel and its header files, just enter the command: + + make install + + This will install the kernel into $(prefix)/boot/gnumach and the +header files into $(prefix)/include. You can also only install the +kernel or the header files. For this, the two targets install-kernel +and install-headers are provided. + + +File: mach.info, Node: Configuration, Next: Cross-Compilation, Prev: Compilation, Up: Installing + +2.3 Configuration +================= + +The following options can be passed to the configure script as command +line arguments and control what components are built into the kernel, or +where it is installed. + + The default for an option is to be disabled, unless otherwise noted. + + This table is out-dated. Please see the file `i386/README-Drivers' +and the output of `[GNU Mach]/configure --help=recursive'. + +`--prefix PREFIX' + Sets the prefix to PREFIX. The default prefix is the empty + string, which is the correct value for the GNU system. The prefix + is prepended to all file names at installation time. + +`--enable-kdb' + Enables the in-kernel debugger. This is only useful if you + actually anticipate debugging the kernel. It is not enabled by + default because it adds considerably to the unpageable memory + footprint of the kernel. *Note Kernel Debugger::. + +`--enable-kmsg' + Enables the kernel message device kmsg. + +`--enable-lpr' + Enables the parallel port devices lpr%d. + +`--enable-floppy' + Enables the PC floppy disk controller devices fd%d. + +`--enable-ide' + Enables the IDE controller devices hd%d, hd%ds%d. + + The following options enable drivers for various SCSI controller. +SCSI devices are named sd%d (disks) or cd%d (CD ROMs). + +`--enable-advansys' + Enables the AdvanSys SCSI controller devices sd%d, cd%d. + +`--enable-buslogic' + Enables the BusLogic SCSI controller devices sd%d, cd%d. + +`--disable-flashpoint' + Only meaningful in conjunction with `--enable-buslogic'. Omits the + FlshPoint support. This option is enabled by default if + `--enable-buslogic' is specified. + +`--enable-u1434f' + Enables the UltraStor 14F/34F SCSI controller devices sd%d, cd%d. + +`--enable-ultrastor' + Enables the UltraStor SCSI controller devices sd%d, cd%d. + +`--enable-aha152x' +`--enable-aha2825' + Enables the Adaptec AHA-152x/2825 SCSI controller devices sd%d, + cd%d. + +`--enable-aha1542' + Enables the Adaptec AHA-1542 SCSI controller devices sd%d, cd%d. + +`--enable-aha1740' + Enables the Adaptec AHA-1740 SCSI controller devices sd%d, cd%d. + +`--enable-aic7xxx' + Enables the Adaptec AIC7xxx SCSI controller devices sd%d, cd%d. + +`--enable-futuredomain' + Enables the Future Domain 16xx SCSI controller devices sd%d, cd%d. + +`--enable-in2000' + Enables the Always IN 2000 SCSI controller devices sd%d, cd%d. + +`--enable-ncr5380' +`--enable-ncr53c400' + Enables the generic NCR5380/53c400 SCSI controller devices sd%d, + cd%d. + +`--enable-ncr53c406a' + Enables the NCR53c406a SCSI controller devices sd%d, cd%d. + +`--enable-pas16' + Enables the PAS16 SCSI controller devices sd%d, cd%d. + +`--enable-seagate' + Enables the Seagate ST02 and Future Domain TMC-8xx SCSI controller + devices sd%d, cd%d. + +`--enable-t128' +`--enable-t128f' +`--enable-t228' + Enables the Trantor T128/T128F/T228 SCSI controller devices sd%d, + cd%d. + +`--enable-ncr53c7xx' + Enables the NCR53C7,8xx SCSI controller devices sd%d, cd%d. + +`--enable-eatadma' + Enables the EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, + Alphatronix) SCSI controller devices sd%d, cd%d. + +`--enable-eatapio' + Enables the EATA-PIO (old DPT PM2001, PM2012A) SCSI controller + devices sd%d, cd%d. + +`--enable-wd7000' + Enables the WD 7000 SCSI controller devices sd%d, cd%d. + +`--enable-eata' + Enables the EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant + boards) SCSI controller devices sd%d, cd%d. + +`--enable-am53c974' +`--enable-am79c974' + Enables the AM53/79C974 SCSI controller devices sd%d, cd%d. + +`--enable-dtc3280' +`--enable-dtc3180' + Enables the DTC3180/3280 SCSI controller devices sd%d, cd%d. + +`--enable-ncr53c8xx' +`--enable-dc390w' +`--enable-dc390u' +`--enable-dc390f' + Enables the NCR53C8XX SCSI controller devices sd%d, cd%d. + +`--enable-dc390t' +`--enable-dc390' + Enables the Tekram DC-390(T) SCSI controller devices sd%d, cd%d. + +`--enable-ppa' + Enables the IOMEGA Parallel Port ZIP drive device sd%d. + +`--enable-qlogicfas' + Enables the Qlogic FAS SCSI controller devices sd%d, cd%d. + +`--enable-qlogicisp' + Enables the Qlogic ISP SCSI controller devices sd%d, cd%d. + +`--enable-gdth' + Enables the GDT SCSI Disk Array controller devices sd%d, cd%d. + + The following options enable drivers for various ethernet cards. +NIC device names are usually eth%d, except for the pocket adaptors. + + GNU Mach does only autodetect one ethernet card. To enable any +further cards, the source code has to be edited. + +`--enable-ne2000' +`--enable-ne1000' + Enables the NE2000/NE1000 ISA netword card devices eth%d. + +`--enable-3c503' +`--enable-el2' + Enables the 3Com 503 (Etherlink II) netword card devices eth%d. + +`--enable-3c509' +`--enable-3c579' +`--enable-el3' + Enables the 3Com 509/579 (Etherlink III) netword card devices + eth%d. + +`--enable-wd80x3' + Enables the WD80X3 netword card devices eth%d. + +`--enable-3c501' +`--enable-el1' + Enables the 3COM 501 netword card devices eth%d. + +`--enable-ul' + Enables the SMC Ultra netword card devices eth%d. + +`--enable-ul32' + Enables the SMC Ultra 32 netword card devices eth%d. + +`--enable-hplanplus' + Enables the HP PCLAN+ (27247B and 27252A) netword card devices + eth%d. + +`--enable-hplan' + Enables the HP PCLAN (27245 and other 27xxx series) netword card + devices eth%d. + +`--enable-3c59x' +`--enable-3c90x' +`--enable-vortex' + Enables the 3Com 590/900 series (592/595/597/900/905) + "Vortex/Boomerang" netword card devices eth%d. + +`--enable-seeq8005' + Enables the Seeq8005 netword card devices eth%d. + +`--enable-hp100' +`--enable-hpj2577' +`--enable-hpj2573' +`--enable-hp27248b' +`--enable-hp2585' + Enables the HP 10/100VG PCLAN (ISA, EISA, PCI) netword card devices + eth%d. + +`--enable-ac3200' + Enables the Ansel Communications EISA 3200 netword card devices + eth%d. + +`--enable-e2100' + Enables the Cabletron E21xx netword card devices eth%d. + +`--enable-at1700' + Enables the AT1700 (Fujitsu 86965) netword card devices eth%d. + +`--enable-eth16i' +`--enable-eth32' + Enables the ICL EtherTeam 16i/32 netword card devices eth%d. + +`--enable-znet' +`--enable-znote' + Enables the Zenith Z-Note netword card devices eth%d. + +`--enable-eexpress' + Enables the EtherExpress 16 netword card devices eth%d. + +`--enable-eexpresspro' + Enables the EtherExpressPro netword card devices eth%d. + +`--enable-eexpresspro100' + Enables the Intel EtherExpressPro PCI 10+/100B/100+ netword card + devices eth%d. + +`--enable-depca' +`--enable-de100' +`--enable-de101' +`--enable-de200' +`--enable-de201' +`--enable-de202' +`--enable-de210' +`--enable-de422' + Enables the DEPCA, DE10x, DE200, DE201, DE202, DE210, DE422 + netword card devices eth%d. + +`--enable-ewrk3' +`--enable-de203' +`--enable-de204' +`--enable-de205' + Enables the EtherWORKS 3 (DE203, DE204, DE205) netword card devices + eth%d. + +`--enable-de4x5' +`--enable-de425' +`--enable-de434' +`--enable-435' +`--enable-de450' +`--enable-500' + Enables the DE425, DE434, DE435, DE450, DE500 netword card devices + eth%d. + +`--enable-apricot' + Enables the Apricot XEN-II on board ethernet netword card devices + eth%d. + +`--enable-wavelan' + Enables the AT&T WaveLAN & DEC RoamAbout DS netword card devices + eth%d. + +`--enable-3c507' +`--enable-el16' + Enables the 3Com 507 netword card devices eth%d. + +`--enable-3c505' +`--enable-elplus' + Enables the 3Com 505 netword card devices eth%d. + +`--enable-de600' + Enables the D-Link DE-600 netword card devices eth%d. + +`--enable-de620' + Enables the D-Link DE-620 netword card devices eth%d. + +`--enable-skg16' + Enables the Schneider & Koch G16 netword card devices eth%d. + +`--enable-ni52' + Enables the NI5210 netword card devices eth%d. + +`--enable-ni65' + Enables the NI6510 netword card devices eth%d. + +`--enable-atp' + Enables the AT-LAN-TEC/RealTek pocket adaptor netword card devices + atp%d. + +`--enable-lance' +`--enable-at1500' +`--enable-ne2100' + Enables the AMD LANCE and PCnet (AT1500 and NE2100) netword card + devices eth%d. + +`--enable-elcp' +`--enable-tulip' + Enables the DECchip Tulip (dc21x4x) PCI netword card devices eth%d. + +`--enable-fmv18x' + Enables the FMV-181/182/183/184 netword card devices eth%d. + +`--enable-3c515' + Enables the 3Com 515 ISA Fast EtherLink netword card devices eth%d. + +`--enable-pcnet32' + Enables the AMD PCI PCnet32 (PCI bus NE2100 cards) netword card + devices eth%d. + +`--enable-ne2kpci' + Enables the PCI NE2000 netword card devices eth%d. + +`--enable-yellowfin' + Enables the Packet Engines Yellowfin Gigabit-NIC netword card + devices eth%d. + +`--enable-rtl8139' +`--enable-rtl8129' + Enables the RealTek 8129/8139 (not 8019/8029!) netword card + devices eth%d. + +`--enable-epic' +`--enable-epic100' + Enables the SMC 83c170/175 EPIC/100 (EtherPower II) netword card + devices eth%d. + +`--enable-tlan' + Enables the TI ThunderLAN netword card devices eth%d. + +`--enable-viarhine' + Enables the VIA Rhine netword card devices eth%d. + +`--enable-hamachi' + Enables the Packet Engines "Hamachi" GNIC-2 Gigabit Ethernet + devices eth%d. + +`--enable-intel-gige' + Enables the Intel PCI Gigabit Ethernet devices eth%d. + +`--enable-myson803' + Enables the Myson MTD803 Ethernet adapter series devices eth%d. + +`--enable-natsemi' + Enables the National Semiconductor DP8381x series PCI Ethernet + devices eth%d. + +`--enable-ns820' + Enables the National Semiconductor DP8382x series PCI Ethernet + devices eth%d. + +`--enable-starfire' + Enables the Adaptec Starfire network adapter devices eth%d. + +`--enable-sundance' + Enables the Sundance ST201 "Alta" PCI Ethernet devices eth%d. + +`--enable-winbond-840' + Enables the Winbond W89c840 PCI Ethernet devices eth%d. + + The following options either enable drivers for supported PCMCIA +bridges or control the overall behaviour of the GNU Mach PCMCIA core. +To make use of GNU Mach PCMCIA support you need to have the +corresponding userland applications (GNU Mach Card Services) installed. + +`--enable-i82365' + Enables the driver for the Intel 82365 and compatible PC Card + controllers, and Yenta-compatible PCI-to-CardBus controllers. + +`--enable-pcmcia-isa' + Enables ISA-bus related bits in the GNU Mach PCMCIA core. This is + generally a good idea, since it does not only have effect if your + PC Card bridge is attached to the ISA bus, but provides more (ISA) + interrupts to the Card Services for it to assign to the cards in + turn. + + The following options enable drivers for supported PCMCIA Ethernet +controllers. NIC device names are usually eth%d. + +`--enable-3c574_cs' + Enables the PCMCIA ethernet driver for the 3Com 3c574 "RoadRunner". + +`--enable-3c589_cs' + Enables the driver for the 3Com 3c589 PCMCIA card. + +`--enable-axnet_cs' + Enables the driver for the Asix AX88190-based PCMCIA cards. + +`--enable-fmvj18x_cs' + Enables the driver for PCMCIA cards with the fmvj18x chipset. + +`--enable-nmclan_cs' + Enables the driver for the New Media Ethernet LAN PCMCIA cards. + +`--enable-pcnet_cs' + Enables the driver for NS8390-based PCMCIA cards. + + This driver supports the D-Link DE-650 and Linksys EthernetCard + cards, the newer D-Link and Linksys combo cards, Accton EN2212 + cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory + mode, and the IBM Credit Card Adapter, the NE4100, the Thomas + Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory + mode. It will also handle the Socket EA card in either mode. + +`--enable-smc91c92_cs' + Enables the driver for SMC91c92-based PCMCIA cards. + +`--enable-xirc2ps_cs' + Enables the driver for Xircom CreditCard and Realport PCMCIA + ethernet adapters. + + The following options enable drivers for supported PCMCIA Wireless +LAN network controllers. NIC device names are usually eth%d. + + Please mind, that you need to have some userland applications (the +GNU Mach Wireless Tools) installed, in order to make use of these +devices. + +`--enable-orinoco_cs' + Enables the driver for the Hermes or Prism 2 chipset based PCMCIA + wireless adapters, with Lucent/Agere, Intersil or Symbol firmware. + + This driver is suitable for PCMCIA wireless adapters, such as the + Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/EnteraSys + RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). It + should also be usable on various Prism II based cards such as the + Linksys, D-Link and Farallon Skyline. It should also work on Symbol + cards such as the 3Com AirConnect and Ericsson WLAN. + + +File: mach.info, Node: Cross-Compilation, Prev: Configuration, Up: Installing + +2.4 Cross-Compilation +===================== + +Another way to install the kernel is to use an existing operating system +in order to compile the kernel binary. This is called +"cross-compiling", because it is done between two different platforms. +If the pre-built kernels are not working for you, and you can't ask +someone to compile a custom kernel for your machine, this is your last +chance to get a kernel that boots on your hardware. + + Luckily, the kernel does have light dependencies. You don't even +need a cross compiler if your build machine has a compiler and is the +same architecture as the system you want to run GNU Mach on. + + You need a cross-mig, though. + + XXX More info needed. + + +File: mach.info, Node: Bootstrap, Next: Inter Process Communication, Prev: Installing, Up: Top + +3 Bootstrap +*********** + +Bootstrapping(1) is the procedure by which your machine loads the +microkernel and transfers control to the operating system. + +* Menu: + +* Bootloader:: Starting the microkernel, or other OSes. +* Modules:: Starting the first task of the OS. + + ---------- Footnotes ---------- + + (1) The term "bootstrapping" refers to a Dutch legend about a boy +who was able to fly by pulling himself up by his bootstraps. In +computers, this term refers to any process where a simple system +activates a more complicated system. + + +File: mach.info, Node: Bootloader, Next: Modules, Up: Bootstrap + +3.1 Bootloader +============== + +The "bootloader" is the first software that runs on your machine. Many +hardware architectures have a very simple startup routine which reads a +very simple bootloader from the beginning of the internal hard disk, +then transfers control to it. Other architectures have startup +routines which are able to understand more of the contents of the hard +disk, and directly start a more advanced bootloader. + + Currently, "GRUB"(1) is the preferred GNU bootloader. GRUB provides +advanced functionality, and is capable of loading several different +kernels (such as Mach, Linux, DOS, and the *BSD family). *Note +Introduction: (grub)Top. + + GNU Mach conforms to the Multiboot specification which defines an +interface between the bootloader and the components that run very early +at startup. GNU Mach can be started by any bootloader which supports +the multiboot standard. After the bootloader loaded the kernel image to +a designated address in the system memory, it jumps into the startup +code of the kernel. This code initializes the kernel and detects the +available hardware devices. Afterwards, the first system task is +started. *Note Overview: (multiboot)Top. + + ---------- Footnotes ---------- + + (1) The GRand Unified Bootloader, available from +`http://www.uruk.org/grub/'. + + +File: mach.info, Node: Modules, Prev: Bootloader, Up: Bootstrap + +3.2 Modules +=========== + +Because the microkernel does not provide filesystem support and other +features necessary to load the first system task from a storage medium, +the first task is loaded by the bootloader as a module to a specified +address. In the GNU system, this first program is the `serverboot' +executable. GNU Mach inserts the host control port and the device +master port into this task and appends the port numbers to the command +line before executing it. + + The `serverboot' program is responsible for loading and executing +the rest of the Hurd servers. Rather than containing specific +instructions for starting the Hurd, it follows general steps given in a +user-supplied boot script. + + XXX More about boot scripts. + + +File: mach.info, Node: Inter Process Communication, Next: Virtual Memory Interface, Prev: Bootstrap, Up: Top + +4 Inter Process Communication +***************************** + +This chapter describes the details of the Mach IPC system. First the +actual calls concerned with sending and receiving messages are +discussed, then the details of the port system are described in detail. + +* Menu: + +* Major Concepts:: The concepts behind the Mach IPC system. +* Messaging Interface:: Composing, sending and receiving messages. +* Port Manipulation Interface:: Manipulating ports, port rights, port sets. + + +File: mach.info, Node: Major Concepts, Next: Messaging Interface, Up: Inter Process Communication + +4.1 Major Concepts +================== + +The Mach kernel provides message-oriented, capability-based interprocess +communication. The interprocess communication (IPC) primitives +efficiently support many different styles of interaction, including +remote procedure calls (RPC), object-oriented distributed programming, +streaming of data, and sending very large amounts of data. + + The IPC primitives operate on three abstractions: messages, ports, +and port sets. User tasks access all other kernel services and +abstractions via the IPC primitives. + + The message primitives let tasks send and receive messages. Tasks +send messages to ports. Messages sent to a port are delivered reliably +(messages may not be lost) and are received in the order in which they +were sent. Messages contain a fixed-size header and a variable amount +of typed data following the header. The header describes the +destination and size of the message. + + The IPC implementation makes use of the VM system to efficiently +transfer large amounts of data. The message body can contain the +address of a region in the sender's address space which should be +transferred as part of the message. When a task receives a message +containing an out-of-line region of data, the data appears in an unused +portion of the receiver's address space. This transmission of +out-of-line data is optimized so that sender and receiver share the +physical pages of data copy-on-write, and no actual data copy occurs +unless the pages are written. Regions of memory up to the size of a +full address space may be sent in this manner. + + Ports hold a queue of messages. Tasks operate on a port to send and +receive messages by exercising capabilities for the port. Multiple +tasks can hold send capabilities, or rights, for a port. Tasks can also +hold send-once rights, which grant the ability to send a single message. +Only one task can hold the receive capability, or receive right, for a +port. Port rights can be transferred between tasks via messages. The +sender of a message can specify in the message body that the message +contains a port right. If a message contains a receive right for a +port, then the receive right is removed from the sender of the message +and the right is transferred to the receiver of the message. While the +receive right is in transit, tasks holding send rights can still send +messages to the port, and they are queued until a task acquires the +receive right and uses it to receive the messages. + + Tasks can receive messages from ports and port sets. The port set +abstraction allows a single thread to wait for a message from any of +several ports. Tasks manipulate port sets with a capability, or +port-set right, which is taken from the same space as the port +capabilities. The port-set right may not be transferred in a message. +A port set holds receive rights, and a receive operation on a port set +blocks waiting for a message sent to any of the constituent ports. A +port may not belong to more than one port set, and if a port is a member +of a port set, the holder of the receive right can't receive directly +from the port. + + Port rights are a secure, location-independent way of naming ports. +The port queue is a protected data structure, only accessible via the +kernel's exported message primitives. Rights are also protected by the +kernel; there is no way for a malicious user task to guess a port name +and send a message to a port to which it shouldn't have access. Port +rights do not carry any location information. When a receive right for +a port moves from task to task, and even between tasks on different +machines, the send rights for the port remain unchanged and continue to +function. + + +File: mach.info, Node: Messaging Interface, Next: Port Manipulation Interface, Prev: Major Concepts, Up: Inter Process Communication + +4.2 Messaging Interface +======================= + +This section describes how messages are composed, sent and received +within the Mach IPC system. + +* Menu: + +* Mach Message Call:: Sending and receiving messages. +* Message Format:: The format of Mach messages. +* Exchanging Port Rights:: Sending and receiving port rights. +* Memory:: Passing memory regions in messages. +* Message Send:: Sending messages. +* Message Receive:: Receiving messages. +* Atomicity:: Atomicity of port rights. + + +File: mach.info, Node: Mach Message Call, Next: Message Format, Up: Messaging Interface + +4.2.1 Mach Message Call +----------------------- + +To use the `mach_msg' call, you can include the header files +`mach/port.h' and `mach/message.h'. + + -- Function: mach_msg_return_t mach_msg (mach_msg_header_t *MSG, + mach_msg_option_t OPTION, mach_msg_size_t SEND_SIZE, + mach_msg_size_t RCV_SIZE, mach_port_t RCV_NAME, + mach_msg_timeout_t TIMEOUT, mach_port_t NOTIFY) + The `mach_msg' function is used to send and receive messages. Mach + messages contain typed data, which can include port rights and + references to large regions of memory. + + MSG is the address of a buffer in the caller's address space. + Message buffers should be aligned on long-word boundaries. The + message options OPTION are bit values, combined with bitwise-or. + One or both of `MACH_SEND_MSG' and `MACH_RCV_MSG' should be used. + Other options act as modifiers. When sending a message, SEND_SIZE + specifies the size of the message buffer. Otherwise zero should be + supplied. When receiving a message, RCV_SIZE specifies the size + of the message buffer. Otherwise zero should be supplied. When + receiving a message, RCV_NAME specifies the port or port set. + Otherwise `MACH_PORT_NULL' should be supplied. When using the + `MACH_SEND_TIMEOUT' and `MACH_RCV_TIMEOUT' options, TIMEOUT + specifies the time in milliseconds to wait before giving up. + Otherwise `MACH_MSG_TIMEOUT_NONE' should be supplied. When using + the `MACH_SEND_NOTIFY', `MACH_SEND_CANCEL', and `MACH_RCV_NOTIFY' + options, NOTIFY specifies the port used for the notification. + Otherwise `MACH_PORT_NULL' should be supplied. + + If the option argument is `MACH_SEND_MSG', it sends a message. The + SEND_SIZE argument specifies the size of the message to send. The + `msgh_remote_port' field of the message header specifies the + destination of the message. + + If the option argument is `MACH_RCV_MSG', it receives a message. + The RCV_SIZE argument specifies the size of the message buffer + that will receive the message; messages larger than RCV_SIZE are + not received. The RCV_NAME argument specifies the port or port + set from which to receive. + + If the option argument is `MACH_SEND_MSG|MACH_RCV_MSG', then + `mach_msg' does both send and receive operations. If the send + operation encounters an error (any return code other than + `MACH_MSG_SUCCESS'), then the call returns immediately without + attempting the receive operation. Semantically the combined call + is equivalent to separate send and receive calls, but it saves a + system call and enables other internal optimizations. + + If the option argument specifies neither `MACH_SEND_MSG' nor + `MACH_RCV_MSG', then `mach_msg' does nothing. + + Some options, like `MACH_SEND_TIMEOUT' and `MACH_RCV_TIMEOUT', + share a supporting argument. If these options are used together, + they make independent use of the supporting argument's value. + + -- Data type: mach_msg_timeout_t + This is a `natural_t' used by the timeout mechanism. The units are + milliseconds. The value to be used when there is no timeout is + `MACH_MSG_TIMEOUT_NONE'. + + +File: mach.info, Node: Message Format, Next: Exchanging Port Rights, Prev: Mach Message Call, Up: Messaging Interface + +4.2.2 Message Format +-------------------- + +A Mach message consists of a fixed size message header, a +`mach_msg_header_t', followed by zero or more data items. Data items +are typed. Each item has a type descriptor followed by the actual data +(or the address of the data, for out-of-line memory regions). + + The following data types are related to Mach ports: + + -- Data type: mach_port_t + The `mach_port_t' data type is an unsigned integer type which + represents a port name in the task's port name space. In GNU + Mach, this is an `unsigned int'. + + The following data types are related to Mach messages: + + -- Data type: mach_msg_bits_t + The `mach_msg_bits_t' data type is an `unsigned int' used to store + various flags for a message. + + -- Data type: mach_msg_size_t + The `mach_msg_size_t' data type is an `unsigned int' used to store + the size of a message. + + -- Data type: mach_msg_id_t + The `mach_msg_id_t' data type is an `integer_t' typically used to + convey a function or operation id for the receiver. + + -- Data type: mach_msg_header_t + This structure is the start of every message in the Mach IPC + system. It has the following members: + + `mach_msg_bits_t msgh_bits' + The `msgh_bits' field has the following bits defined, all + other bits should be zero: + + `MACH_MSGH_BITS_REMOTE_MASK' + `MACH_MSGH_BITS_LOCAL_MASK' + The remote and local bits encode `mach_msg_type_name_t' + values that specify the port rights in the + `msgh_remote_port' and `msgh_local_port' fields. The + remote value must specify a send or send-once right for + the destination of the message. If the local value + doesn't specify a send or send-once right for the + message's reply port, it must be zero and + msgh_local_port must be `MACH_PORT_NULL'. + + `MACH_MSGH_BITS_COMPLEX' + The complex bit must be specified if the message body + contains port rights or out-of-line memory regions. If + it is not specified, then the message body carries no + port rights or memory, no matter what the type + descriptors may seem to indicate. + + `MACH_MSGH_BITS_REMOTE' and `MACH_MSGH_BITS_LOCAL' macros + return the appropriate `mach_msg_type_name_t' values, given a + `msgh_bits' value. The `MACH_MSGH_BITS' macro constructs a + value for `msgh_bits', given two `mach_msg_type_name_t' + values. + + `mach_msg_size_t msgh_size' + The `msgh_size' field in the header of a received message + contains the message's size. The message size, a byte + quantity, includes the message header, type descriptors, and + in-line data. For out-of-line memory regions, the message + size includes the size of the in-line address, not the size + of the actual memory region. There are no arbitrary limits + on the size of a Mach message, the number of data items in a + message, or the size of the data items. + + `mach_port_t msgh_remote_port' + The `msgh_remote_port' field specifies the destination port + of the message. The field must carry a legitimate send or + send-once right for a port. + + `mach_port_t msgh_local_port' + The `msgh_local_port' field specifies an auxiliary port right, + which is conventionally used as a reply port by the recipient + of the message. The field must carry a send right, a + send-once right, `MACH_PORT_NULL', or `MACH_PORT_DEAD'. + + `mach_port_seqno_t msgh_seqno' + The `msgh_seqno' field provides a sequence number for the + message. It is only valid in received messages; its value in + sent messages is overwritten. + + `mach_msg_id_t msgh_id' + The `mach_msg' call doesn't use the `msgh_id' field, but it + conventionally conveys an operation or function id. + + -- Macro: mach_msg_bits_t MACH_MSGH_BITS (mach_msg_type_name_t REMOTE, + mach_msg_type_name_t LOCAL) + This macro composes two `mach_msg_type_name_t' values that specify + the port rights in the `msgh_remote_port' and `msgh_local_port' + fields of a `mach_msg' call into an appropriate `mach_msg_bits_t' + value. + + -- Macro: mach_msg_type_name_t MACH_MSGH_BITS_REMOTE + (mach_msg_bits_t BITS) + This macro extracts the `mach_msg_type_name_t' value for the remote + port right in a `mach_msg_bits_t' value. + + -- Macro: mach_msg_type_name_t MACH_MSGH_BITS_LOCAL + (mach_msg_bits_t BITS) + This macro extracts the `mach_msg_type_name_t' value for the local + port right in a `mach_msg_bits_t' value. + + -- Macro: mach_msg_bits_t MACH_MSGH_BITS_PORTS (mach_msg_bits_t BITS) + This macro extracts the `mach_msg_bits_t' component consisting of + the `mach_msg_type_name_t' values for the remote and local port + right in a `mach_msg_bits_t' value. + + -- Macro: mach_msg_bits_t MACH_MSGH_BITS_OTHER (mach_msg_bits_t BITS) + This macro extracts the `mach_msg_bits_t' component consisting of + everything except the `mach_msg_type_name_t' values for the remote + and local port right in a `mach_msg_bits_t' value. + + Each data item has a type descriptor, a `mach_msg_type_t' or a +`mach_msg_type_long_t'. The `mach_msg_type_long_t' type descriptor +allows larger values for some fields. The `msgtl_header' field in the +long descriptor is only used for its inline, longform, and deallocate +bits. + + -- Data type: mach_msg_type_name_t + This is an `unsigned int' and can be used to hold the `msgt_name' + component of the `mach_msg_type_t' and `mach_msg_type_long_t' + structure. + + -- Data type: mach_msg_type_size_t + This is an `unsigned int' and can be used to hold the `msgt_size' + component of the `mach_msg_type_t' and `mach_msg_type_long_t' + structure. + + -- Data type: mach_msg_type_number_t + This is an `natural_t' and can be used to hold the `msgt_number' + component of the `mach_msg_type_t' and `mach_msg_type_long_t' + structure. + + -- Data type: mach_msg_type_t + This structure has the following members: + + `unsigned int msgt_name : 8' + The `msgt_name' field specifies the data's type. The + following types are predefined: + + `MACH_MSG_TYPE_UNSTRUCTURED' + + `MACH_MSG_TYPE_BIT' + + `MACH_MSG_TYPE_BOOLEAN' + + `MACH_MSG_TYPE_INTEGER_16' + + `MACH_MSG_TYPE_INTEGER_32' + + `MACH_MSG_TYPE_CHAR' + + `MACH_MSG_TYPE_BYTE' + + `MACH_MSG_TYPE_INTEGER_8' + + `MACH_MSG_TYPE_REAL' + + `MACH_MSG_TYPE_STRING' + + `MACH_MSG_TYPE_STRING_C' + + `MACH_MSG_TYPE_PORT_NAME' + + The following predefined types specify port rights, and + receive special treatment. The next section discusses these + types in detail. The type `MACH_MSG_TYPE_PORT_NAME' + describes port right names, when no rights are being + transferred, but just names. For this purpose, it should be + used in preference to `MACH_MSG_TYPE_INTEGER_32'. + + `MACH_MSG_TYPE_MOVE_RECEIVE' + + `MACH_MSG_TYPE_MOVE_SEND' + + `MACH_MSG_TYPE_MOVE_SEND_ONCE' + + `MACH_MSG_TYPE_COPY_SEND' + + `MACH_MSG_TYPE_MAKE_SEND' + + `MACH_MSG_TYPE_MAKE_SEND_ONCE' + + `msgt_size : 8' + The `msgt_size' field specifies the size of each datum, in + bits. For example, the msgt_size of + `MACH_MSG_TYPE_INTEGER_32' data is 32. + + `msgt_number : 12' + The `msgt_number' field specifies how many data elements + comprise the data item. Zero is a legitimate number. + + The total length specified by a type descriptor is + `(msgt_size * msgt_number)', rounded up to an integral number + of bytes. In-line data is then padded to an integral number + of long-words. This ensures that type descriptors always + start on long-word boundaries. It implies that message sizes + are always an integral multiple of a long-word's size. + + `msgt_inline : 1' + The `msgt_inline' bit specifies, when `FALSE', that the data + actually resides in an out-of-line region. The address of + the memory region (a `vm_offset_t' or `vm_address_t') follows + the type descriptor in the message body. The `msgt_name', + `msgt_size', and `msgt_number' fields describe the memory + region, not the address. + + `msgt_longform : 1' + The `msgt_longform' bit specifies, when `TRUE', that this type + descriptor is a `mach_msg_type_long_t' instead of a + `mach_msg_type_t'. The `msgt_name', `msgt_size', and + `msgt_number' fields should be zero. Instead, `mach_msg' uses + the following `msgtl_name', `msgtl_size', and `msgtl_number' + fields. + + `msgt_deallocate : 1' + The `msgt_deallocate' bit is used with out-of-line regions. + When `TRUE', it specifies that the memory region should be + deallocated from the sender's address space (as if with + `vm_deallocate') when the message is sent. + + `msgt_unused : 1' + The `msgt_unused' bit should be zero. + + -- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY (mach_msg_type_name_t type) + This macro returns `TRUE' if the given type name specifies a port + type, otherwise it returns `FALSE'. + + -- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY_SEND (mach_msg_type_name_t + type) + This macro returns `TRUE' if the given type name specifies a port + type with a send or send-once right, otherwise it returns `FALSE'. + + -- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY_RIGHT (mach_msg_type_name_t + type) + This macro returns `TRUE' if the given type name specifies a port + right type which is moved, otherwise it returns `FALSE'. + + -- Data type: mach_msg_type_long_t + This structure has the following members: + + `mach_msg_type_t msgtl_header' + Same meaning as `msgt_header'. + + `unsigned short msgtl_name' + Same meaning as `msgt_name'. + + `unsigned short msgtl_size' + Same meaning as `msgt_size'. + + `unsigned int msgtl_number' + Same meaning as `msgt_number'. + + +File: mach.info, Node: Exchanging Port Rights, Next: Memory, Prev: Message Format, Up: Messaging Interface + +4.2.3 Exchanging Port Rights +---------------------------- + +Each task has its own space of port rights. Port rights are named with +positive integers. Except for the reserved values +`MACH_PORT_NULL (0)'(1) and `MACH_PORT_DEAD (~0)', this is a full 32-bit +name space. When the kernel chooses a name for a new right, it is free +to pick any unused name (one which denotes no right) in the space. + + There are five basic kinds of rights: receive rights, send rights, +send-once rights, port-set rights, and dead names. Dead names are not +capabilities. They act as place-holders to prevent a name from being +otherwise used. + + A port is destroyed, or dies, when its receive right is deallocated. +When a port dies, send and send-once rights for the port turn into dead +names. Any messages queued at the port are destroyed, which deallocates +the port rights and out-of-line memory in the messages. + + Tasks may hold multiple user-references for send rights and dead +names. When a task receives a send right which it already holds, the +kernel increments the right's user-reference count. When a task +deallocates a send right, the kernel decrements its user-reference +count, and the task only loses the send right when the count goes to +zero. + + Send-once rights always have a user-reference count of one, although +a port can have multiple send-once rights, because each send-once right +held by a task has a different name. In contrast, when a task holds +send rights or a receive right for a port, the rights share a single +name. + + A message body can carry port rights; the `msgt_name' (`msgtl_name') +field in a type descriptor specifies the type of port right and how the +port right is to be extracted from the caller. The values +`MACH_PORT_NULL' and `MACH_PORT_DEAD' are always valid in place of a +port right in a message body. In a sent message, the following +`msgt_name' values denote port rights: + +`MACH_MSG_TYPE_MAKE_SEND' + The message will carry a send right, but the caller must supply a + receive right. The send right is created from the receive right, + and the receive right's make-send count is incremented. + +`MACH_MSG_TYPE_COPY_SEND' + The message will carry a send right, and the caller should supply + a send right. The user reference count for the supplied send + right is not changed. The caller may also supply a dead name and + the receiving task will get `MACH_PORT_DEAD'. + +`MACH_MSG_TYPE_MOVE_SEND' + The message will carry a send right, and the caller should supply + a send right. The user reference count for the supplied send + right is decremented, and the right is destroyed if the count + becomes zero. Unless a receive right remains, the name becomes + available for recycling. The caller may also supply a dead name, + which loses a user reference, and the receiving task will get + `MACH_PORT_DEAD'. + +`MACH_MSG_TYPE_MAKE_SEND_ONCE' + The message will carry a send-once right, but the caller must + supply a receive right. The send-once right is created from the + receive right. + +`MACH_MSG_TYPE_MOVE_SEND_ONCE' + The message will carry a send-once right, and the caller should + supply a send-once right. The caller loses the supplied send-once + right. The caller may also supply a dead name, which loses a user + reference, and the receiving task will get `MACH_PORT_DEAD'. + +`MACH_MSG_TYPE_MOVE_RECEIVE' + The message will carry a receive right, and the caller should + supply a receive right. The caller loses the supplied receive + right, but retains any send rights with the same name. + + If a message carries a send or send-once right, and the port dies +while the message is in transit, then the receiving task will get +`MACH_PORT_DEAD' instead of a right. The following `msgt_name' values +in a received message indicate that it carries port rights: + +`MACH_MSG_TYPE_PORT_SEND' + This name is an alias for `MACH_MSG_TYPE_MOVE_SEND'. The message + carried a send right. If the receiving task already has send + and/or receive rights for the port, then that name for the port + will be reused. Otherwise, the new right will have a new name. + If the task already has send rights, it gains a user reference for + the right (unless this would cause the user-reference count to + overflow). Otherwise, it acquires the send right, with a + user-reference count of one. + +`MACH_MSG_TYPE_PORT_SEND_ONCE' + This name is an alias for `MACH_MSG_TYPE_MOVE_SEND_ONCE'. The + message carried a send-once right. The right will have a new name. + +`MACH_MSG_TYPE_PORT_RECEIVE' + This name is an alias for `MACH_MSG_TYPE_MOVE_RECEIVE'. The + message carried a receive right. If the receiving task already + has send rights for the port, then that name for the port will be + reused. Otherwise, the right will have a new name. The make-send + count of the receive right is reset to zero, but the port retains + other attributes like queued messages, extant send and send-once + rights, and requests for port-destroyed and no-senders + notifications. + + When the kernel chooses a new name for a port right, it can choose +any name, other than `MACH_PORT_NULL' and `MACH_PORT_DEAD', which is +not currently being used for a port right or dead name. It might +choose a name which at some previous time denoted a port right, but is +currently unused. + + ---------- Footnotes ---------- + + (1) In the Hurd system, we don't make the assumption that +`MACH_PORT_NULL' is zero and evaluates to false, but rather compare +port names to `MACH_PORT_NULL' explicitely + + +File: mach.info, Node: Memory, Next: Message Send, Prev: Exchanging Port Rights, Up: Messaging Interface + +4.2.4 Memory +------------ + +A message body can contain the address of a region in the sender's +address space which should be transferred as part of the message. The +message carries a logical copy of the memory, but the kernel uses VM +techniques to defer any actual page copies. Unless the sender or the +receiver modifies the data, the physical pages remain shared. + + An out-of-line transfer occurs when the data's type descriptor +specifies `msgt_inline' as `FALSE'. The address of the memory region (a +`vm_offset_t' or `vm_address_t') should follow the type descriptor in +the message body. The type descriptor and the address contribute to +the message's size (`send_size', `msgh_size'). The out-of-line data +does not contribute to the message's size. + + The name, size, and number fields in the type descriptor describe the +type and length of the out-of-line data, not the in-line address. +Out-of-line memory frequently requires long type descriptors +(`mach_msg_type_long_t'), because the `msgt_number' field is too small +to describe a page of 4K bytes. + + Out-of-line memory arrives somewhere in the receiver's address space +as new memory. It has the same inheritance and protection attributes as +newly `vm_allocate''d memory. The receiver has the responsibility of +deallocating (with `vm_deallocate') the memory when it is no longer +needed. Security-conscious receivers should exercise caution when +using out-of-line memory from untrustworthy sources, because the memory +may be backed by an unreliable memory manager. + + Null out-of-line memory is legal. If the out-of-line region size is +zero (for example, because `msgtl_number' is zero), then the region's +specified address is ignored. A received null out-of-line memory +region always has a zero address. + + Unaligned addresses and region sizes that are not page multiples are +legal. A received message can also contain memory with unaligned +addresses and funny sizes. In the general case, the first and last +pages in the new memory region in the receiver do not contain only data +from the sender, but are partly zero.(1) The received address points +to the start of the data in the first page. This possibility doesn't +complicate deallocation, because `vm_deallocate' does the right thing, +rounding the start address down and the end address up to deallocate +all arrived pages. + + Out-of-line memory has a deallocate option, controlled by the +`msgt_deallocate' bit. If it is `TRUE' and the out-of-line memory +region is not null, then the region is implicitly deallocated from the +sender, as if by `vm_deallocate'. In particular, the start and end +addresses are rounded so that every page overlapped by the memory +region is deallocated. The use of `msgt_deallocate' effectively +changes the memory copy into a memory movement. In a received message, +`msgt_deallocate' is `TRUE' in type descriptors for out-of-line memory. + + Out-of-line memory can carry port rights. + + ---------- Footnotes ---------- + + (1) Sending out-of-line memory with a non-page-aligned address, or a +size which is not a page multiple, works but with a caveat. The extra +bytes in the first and last page of the received memory are not zeroed, +so the receiver can peek at more data than the sender intended to +transfer. This might be a security problem for the sender. + + +File: mach.info, Node: Message Send, Next: Message Receive, Prev: Memory, Up: Messaging Interface + +4.2.5 Message Send +------------------ + +The send operation queues a message to a port. The message carries a +copy of the caller's data. After the send, the caller can freely modify +the message buffer or the out-of-line memory regions and the message +contents will remain unchanged. + + Message delivery is reliable and sequenced. Messages are not lost, +and messages sent to a port, from a single thread, are received in the +order in which they were sent. + + If the destination port's queue is full, then several things can +happen. If the message is sent to a send-once right (`msgh_remote_port' +carries a send-once right), then the kernel ignores the queue limit and +delivers the message. Otherwise the caller blocks until there is room +in the queue, unless the `MACH_SEND_TIMEOUT' or `MACH_SEND_NOTIFY' +options are used. If a port has several blocked senders, then any of +them may queue the next message when space in the queue becomes +available, with the proviso that a blocked sender will not be +indefinitely starved. + + These options modify `MACH_SEND_MSG'. If `MACH_SEND_MSG' is not +also specified, they are ignored. + +`MACH_SEND_TIMEOUT' + The timeout argument should specify a maximum time (in + milliseconds) for the call to block before giving up.(1) If the + message can't be queued before the timeout interval elapses, then + the call returns `MACH_SEND_TIMED_OUT'. A zero timeout is + legitimate. + +`MACH_SEND_NOTIFY' + The notify argument should specify a receive right for a notify + port. If the send were to block, then instead the message is + queued, `MACH_SEND_WILL_NOTIFY' is returned, and a msg-accepted + notification is requested. If `MACH_SEND_TIMEOUT' is also + specified, then `MACH_SEND_NOTIFY' doesn't take effect until the + timeout interval elapses. + + With `MACH_SEND_NOTIFY', a task can forcibly queue to a send right + one message at a time. A msg-accepted notification is sent to the + the notify port when another message can be forcibly queued. If + an attempt is made to use `MACH_SEND_NOTIFY' before then, the call + returns a `MACH_SEND_NOTIFY_IN_PROGRESS' error. + + The msg-accepted notification carries the name of the send right. + If the send right is deallocated before the msg-accepted + notification is generated, then the msg-accepted notification + carries the value `MACH_PORT_NULL'. If the destination port is + destroyed before the notification is generated, then a send-once + notification is generated instead. + +`MACH_SEND_INTERRUPT' + If specified, the `mach_msg' call will return + `MACH_SEND_INTERRUPTED' if a software interrupt aborts the call. + Otherwise, the send operation will be retried. + +`MACH_SEND_CANCEL' + The notify argument should specify a receive right for a notify + port. If the send operation removes the destination port right + from the caller, and the removed right had a dead-name request + registered for it, and notify is the notify port for the dead-name + request, then the dead-name request may be silently canceled + (instead of resulting in a port-deleted notification). + + This option is typically used to cancel a dead-name request made + with the `MACH_RCV_NOTIFY' option. It should only be used as an + optimization. + + The send operation can generate the following return codes. These +return codes imply that the call did nothing: + +`MACH_SEND_MSG_TOO_SMALL' + The specified send_size was smaller than the minimum size for a + message. + +`MACH_SEND_NO_BUFFER' + A resource shortage prevented the kernel from allocating a message + buffer. + +`MACH_SEND_INVALID_DATA' + The supplied message buffer was not readable. + +`MACH_SEND_INVALID_HEADER' + The `msgh_bits' value was invalid. + +`MACH_SEND_INVALID_DEST' + The `msgh_remote_port' value was invalid. + +`MACH_SEND_INVALID_REPLY' + The `msgh_local_port' value was invalid. + +`MACH_SEND_INVALID_NOTIFY' + When using `MACH_SEND_CANCEL', the notify argument did not denote a + valid receive right. + + These return codes imply that some or all of the message was +destroyed: + +`MACH_SEND_INVALID_MEMORY' + The message body specified out-of-line data that was not readable. + +`MACH_SEND_INVALID_RIGHT' + The message body specified a port right which the caller didn't + possess. + +`MACH_SEND_INVALID_TYPE' + A type descriptor was invalid. + +`MACH_SEND_MSG_TOO_SMALL' + The last data item in the message ran over the end of the message. + + These return codes imply that the message was returned to the caller +with a pseudo-receive operation: + +`MACH_SEND_TIMED_OUT' + The timeout interval expired. + +`MACH_SEND_INTERRUPTED' + A software interrupt occurred. + +`MACH_SEND_INVALID_NOTIFY' + When using `MACH_SEND_NOTIFY', the notify argument did not denote a + valid receive right. + +`MACH_SEND_NO_NOTIFY' + A resource shortage prevented the kernel from setting up a + msg-accepted notification. + +`MACH_SEND_NOTIFY_IN_PROGRESS' + A msg-accepted notification was already requested, and hasn't yet + been generated. + + These return codes imply that the message was queued: + +`MACH_SEND_WILL_NOTIFY' + The message was forcibly queued, and a msg-accepted notification + was requested. + +`MACH_MSG_SUCCESS' + The message was queued. + + Some return codes, like `MACH_SEND_TIMED_OUT', imply that the +message was almost sent, but could not be queued. In these situations, +the kernel tries to return the message contents to the caller with a +pseudo-receive operation. This prevents the loss of port rights or +memory which only exist in the message. For example, a receive right +which was moved into the message, or out-of-line memory sent with the +deallocate bit. + + The pseudo-receive operation is very similar to a normal receive +operation. The pseudo-receive handles the port rights in the message +header as if they were in the message body. They are not reversed. +After the pseudo-receive, the message is ready to be resent. If the +message is not resent, note that out-of-line memory regions may have +moved and some port rights may have changed names. + + The pseudo-receive operation may encounter resource shortages. This +is similar to a `MACH_RCV_BODY_ERROR' return code from a receive +operation. When this happens, the normal send return codes are +augmented with the `MACH_MSG_IPC_SPACE', `MACH_MSG_VM_SPACE', +`MACH_MSG_IPC_KERNEL', and `MACH_MSG_VM_KERNEL' bits to indicate the +nature of the resource shortage. + + The queueing of a message carrying receive rights may create a +circular loop of receive rights and messages, which can never be +received. For example, a message carrying a receive right can be sent +to that receive right. This situation is not an error, but the kernel +will garbage-collect such loops, destroying the messages and ports +involved. + + ---------- Footnotes ---------- + + (1) If MACH_SEND_TIMEOUT is used without MACH_SEND_INTERRUPT, then +the timeout duration might not be accurate. When the call is +interrupted and automatically retried, the original timeout is used. +If interrupts occur frequently enough, the timeout interval might never +expire. + + +File: mach.info, Node: Message Receive, Next: Atomicity, Prev: Message Send, Up: Messaging Interface + +4.2.6 Message Receive +--------------------- + +The receive operation dequeues a message from a port. The receiving +task acquires the port rights and out-of-line memory regions carried in +the message. + + The `rcv_name' argument specifies a port or port set from which to +receive. If a port is specified, the caller must possess the receive +right for the port and the port must not be a member of a port set. If +no message is present, then the call blocks, subject to the +`MACH_RCV_TIMEOUT' option. + + If a port set is specified, the call will receive a message sent to +any of the member ports. It is permissible for the port set to have no +member ports, and ports may be added and removed while a receive from +the port set is in progress. The received message can come from any of +the member ports which have messages, with the proviso that a member +port with messages will not be indefinitely starved. The +`msgh_local_port' field in the received message header specifies from +which port in the port set the message came. + + The `rcv_size' argument specifies the size of the caller's message +buffer. The `mach_msg' call will not receive a message larger than +`rcv_size'. Messages that are too large are destroyed, unless the +`MACH_RCV_LARGE' option is used. + + The destination and reply ports are reversed in a received message +header. The `msgh_local_port' field names the destination port, from +which the message was received, and the `msgh_remote_port' field names +the reply port right. The bits in `msgh_bits' are also reversed. The +`MACH_MSGH_BITS_LOCAL' bits have the value `MACH_MSG_TYPE_PORT_SEND' if +the message was sent to a send right, and the value +`MACH_MSG_TYPE_PORT_SEND_ONCE' if was sent to a send-once right. The +`MACH_MSGH_BITS_REMOTE' bits describe the reply port right. + + A received message can contain port rights and out-of-line memory. +The `msgh_local_port' field does not receive a port right; the act of +receiving the message destroys the send or send-once right for the +destination port. The msgh_remote_port field does name a received port +right, the reply port right, and the message body can carry port rights +and memory if `MACH_MSGH_BITS_COMPLEX' is present in msgh_bits. +Received port rights and memory should be consumed or deallocated in +some fashion. + + In almost all cases, `msgh_local_port' will specify the name of a +receive right, either `rcv_name' or if `rcv_name' is a port set, a +member of `rcv_name'. If other threads are concurrently manipulating +the receive right, the situation is more complicated. If the receive +right is renamed during the call, then `msgh_local_port' specifies the +right's new name. If the caller loses the receive right after the +message was dequeued from it, then `mach_msg' will proceed instead of +returning `MACH_RCV_PORT_DIED'. If the receive right was destroyed, +then `msgh_local_port' specifies `MACH_PORT_DEAD'. If the receive +right still exists, but isn't held by the caller, then +`msgh_local_port' specifies `MACH_PORT_NULL'. + + Received messages are stamped with a sequence number, taken from the +port from which the message was received. (Messages received from a +port set are stamped with a sequence number from the appropriate member +port.) Newly created ports start with a zero sequence number, and the +sequence number is reset to zero whenever the port's receive right moves +between tasks. When a message is dequeued from the port, it is stamped +with the port's sequence number and the port's sequence number is then +incremented. The dequeue and increment operations are atomic, so that +multiple threads receiving messages from a port can use the +`msgh_seqno' field to reconstruct the original order of the messages. + + These options modify `MACH_RCV_MSG'. If `MACH_RCV_MSG' is not also +specified, they are ignored. + +`MACH_RCV_TIMEOUT' + The timeout argument should specify a maximum time (in + milliseconds) for the call to block before giving up.(1) If no + message arrives before the timeout interval elapses, then the call + returns `MACH_RCV_TIMED_OUT'. A zero timeout is legitimate. + +`MACH_RCV_NOTIFY' + The notify argument should specify a receive right for a notify + port. If receiving the reply port creates a new port right in the + caller, then the notify port is used to request a dead-name + notification for the new port right. + +`MACH_RCV_INTERRUPT' + If specified, the `mach_msg' call will return + `MACH_RCV_INTERRUPTED' if a software interrupt aborts the call. + Otherwise, the receive operation will be retried. + +`MACH_RCV_LARGE' + If the message is larger than `rcv_size', then the message remains + queued instead of being destroyed. The call returns + `MACH_RCV_TOO_LARGE' and the actual size of the message is returned + in the `msgh_size' field of the message header. + + The receive operation can generate the following return codes. These +return codes imply that the call did not dequeue a message: + +`MACH_RCV_INVALID_NAME' + The specified `rcv_name' was invalid. + +`MACH_RCV_IN_SET' + The specified port was a member of a port set. + +`MACH_RCV_TIMED_OUT' + The timeout interval expired. + +`MACH_RCV_INTERRUPTED' + A software interrupt occurred. + +`MACH_RCV_PORT_DIED' + The caller lost the rights specified by `rcv_name'. + +`MACH_RCV_PORT_CHANGED' + `rcv_name' specified a receive right which was moved into a port + set during the call. + +`MACH_RCV_TOO_LARGE' + When using `MACH_RCV_LARGE', and the message was larger than + `rcv_size'. The message is left queued, and its actual size is + returned in the `msgh_size' field of the message buffer. + + These return codes imply that a message was dequeued and destroyed: + +`MACH_RCV_HEADER_ERROR' + A resource shortage prevented the reception of the port rights in + the message header. + +`MACH_RCV_INVALID_NOTIFY' + When using `MACH_RCV_NOTIFY', the notify argument did not denote a + valid receive right. + +`MACH_RCV_TOO_LARGE' + When not using `MACH_RCV_LARGE', a message larger than `rcv_size' + was dequeued and destroyed. + + In these situations, when a message is dequeued and then destroyed, +the reply port and all port rights and memory in the message body are +destroyed. However, the caller receives the message's header, with all +fields correct, including the destination port but excepting the reply +port, which is `MACH_PORT_NULL'. + + These return codes imply that a message was received: + +`MACH_RCV_BODY_ERROR' + A resource shortage prevented the reception of a port right or + out-of-line memory region in the message body. The message header, + including the reply port, is correct. The kernel attempts to + transfer all port rights and memory regions in the body, and only + destroys those that can't be transferred. + +`MACH_RCV_INVALID_DATA' + The specified message buffer was not writable. The calling task + did successfully receive the port rights and out-of-line memory + regions in the message. + +`MACH_MSG_SUCCESS' + A message was received. + + Resource shortages can occur after a message is dequeued, while +transferring port rights and out-of-line memory regions to the receiving +task. The `mach_msg' call returns `MACH_RCV_HEADER_ERROR' or +`MACH_RCV_BODY_ERROR' in this situation. These return codes always +carry extra bits (bitwise-ored) that indicate the nature of the resource +shortage: + +`MACH_MSG_IPC_SPACE' + There was no room in the task's IPC name space for another port + name. + +`MACH_MSG_VM_SPACE' + There was no room in the task's VM address space for an out-of-line + memory region. + +`MACH_MSG_IPC_KERNEL' + A kernel resource shortage prevented the reception of a port right. + +`MACH_MSG_VM_KERNEL' + A kernel resource shortage prevented the reception of an + out-of-line memory region. + + If a resource shortage prevents the reception of a port right, the +port right is destroyed and the caller sees the name `MACH_PORT_NULL'. +If a resource shortage prevents the reception of an out-of-line memory +region, the region is destroyed and the caller receives a zero address. +In addition, the `msgt_size' (`msgtl_size') field in the data's type +descriptor is changed to zero. If a resource shortage prevents the +reception of out-of-line memory carrying port rights, then the port +rights are always destroyed if the memory region can not be received. +A task never receives port rights or memory regions that it isn't told +about. + + ---------- Footnotes ---------- + + (1) If MACH_RCV_TIMEOUT is used without MACH_RCV_INTERRUPT, then the +timeout duration might not be accurate. When the call is interrupted +and automatically retried, the original timeout is used. If interrupts +occur frequently enough, the timeout interval might never expire. + + +File: mach.info, Node: Atomicity, Prev: Message Receive, Up: Messaging Interface + +4.2.7 Atomicity +--------------- + +The `mach_msg' call handles port rights in a message header atomically. +Port rights and out-of-line memory in a message body do not enjoy this +atomicity guarantee. The message body may be processed front-to-back, +back-to-front, first out-of-line memory then port rights, in some +random order, or even atomically. + + For example, consider sending a message with the destination port +specified as `MACH_MSG_TYPE_MOVE_SEND' and the reply port specified as +`MACH_MSG_TYPE_COPY_SEND'. The same send right, with one +user-reference, is supplied for both the `msgh_remote_port' and +`msgh_local_port' fields. Because `mach_msg' processes the message +header atomically, this succeeds. If `msgh_remote_port' were processed +before `msgh_local_port', then `mach_msg' would return +`MACH_SEND_INVALID_REPLY' in this situation. + + On the other hand, suppose the destination and reply port are both +specified as `MACH_MSG_TYPE_MOVE_SEND', and again the same send right +with one user-reference is supplied for both. Now the send operation +fails, but because it processes the header atomically, mach_msg can +return either `MACH_SEND_INVALID_DEST' or `MACH_SEND_INVALID_REPLY'. + + For example, consider receiving a message at the same time another +thread is deallocating the destination receive right. Suppose the reply +port field carries a send right for the destination port. If the +deallocation happens before the dequeuing, then the receiver gets +`MACH_RCV_PORT_DIED'. If the deallocation happens after the receive, +then the `msgh_local_port' and the `msgh_remote_port' fields both +specify the same right, which becomes a dead name when the receive +right is deallocated. If the deallocation happens between the dequeue +and the receive, then the `msgh_local_port' and `msgh_remote_port' +fields both specify `MACH_PORT_DEAD'. Because the header is processed +atomically, it is not possible for just one of the two fields to hold +`MACH_PORT_DEAD'. + + The `MACH_RCV_NOTIFY' option provides a more likely example. +Suppose a message carrying a send-once right reply port is received with +`MACH_RCV_NOTIFY' at the same time the reply port is destroyed. If the +reply port is destroyed first, then `msgh_remote_port' specifies +`MACH_PORT_DEAD' and the kernel does not generate a dead-name +notification. If the reply port is destroyed after it is received, +then `msgh_remote_port' specifies a dead name for which the kernel +generates a dead-name notification. It is not possible to receive the +reply port right and have it turn into a dead name before the dead-name +notification is requested; as part of the message header the reply port +is received atomically. + + +File: mach.info, Node: Port Manipulation Interface, Prev: Messaging Interface, Up: Inter Process Communication + +4.3 Port Manipulation Interface +=============================== + +This section describes the interface to create, destroy and manipulate +ports, port rights and port sets. + + -- Data type: ipc_space_t + This is a `task_t' (and as such a `mach_port_t'), which holds a + port name associated with a port that represents an IPC space in + the kernel. An IPC space is used by the kernel to manage the port + names and rights available to a task. The IPC space doesn't get a + port name of its own. Instead the port name of the task + containing the IPC space is used to name the IPC space of the task + (as is indicated by the fact that the type of `ipc_space_t' is + actually `task_t'). + + The IPC spaces of tasks are the only ones accessible outside of + the kernel. + +* Menu: + +* Port Creation:: How to create new ports and port sets. +* Port Destruction:: How to destroy ports and port sets. +* Port Names:: How to query and manipulate port names. +* Port Rights:: How to work with port rights. +* Ports and other Tasks:: How to move rights between tasks. +* Receive Rights:: How to work with receive rights. +* Port Sets:: How to work with port sets. +* Request Notifications:: How to request notifications for events. + + +File: mach.info, Node: Port Creation, Next: Port Destruction, Up: Port Manipulation Interface + +4.3.1 Port Creation +------------------- + + -- Function: kern_return_t mach_port_allocate (ipc_space_t TASK, + mach_port_right_t RIGHT, mach_port_t *NAME) + The `mach_port_allocate' function creates a new right in the + specified task. The new right's name is returned in NAME, which + may be any name that wasn't in use. + + The RIGHT argument takes the following values: + + `MACH_PORT_RIGHT_RECEIVE' + `mach_port_allocate' creates a port. The new port is not a + member of any port set. It doesn't have any extant send or + send-once rights. Its make-send count is zero, its sequence + number is zero, its queue limit is + `MACH_PORT_QLIMIT_DEFAULT', and it has no queued messages. + NAME denotes the receive right for the new port. + + TASK does not hold send rights for the new port, only the + receive right. `mach_port_insert_right' and + `mach_port_extract_right' can be used to convert the receive + right into a combined send/receive right. + + `MACH_PORT_RIGHT_PORT_SET' + `mach_port_allocate' creates a port set. The new port set + has no members. + + `MACH_PORT_RIGHT_DEAD_NAME' + `mach_port_allocate' creates a dead name. The new dead name + has one user reference. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if + RIGHT was invalid, `KERN_NO_SPACE' if there was no room in TASK's + IPC name space for another right and `KERN_RESOURCE_SHORTAGE' if + the kernel ran out of memory. + + The `mach_port_allocate' call is actually an RPC to TASK, normally + a send right for a task port, but potentially any send right. In + addition to the normal diagnostic return codes from the call's + server (normally the kernel), the call may return `mach_msg' + return codes. + + -- Function: mach_port_t mach_reply_port () + The `mach_reply_port' system call creates a reply port in the + calling task. + + `mach_reply_port' creates a port, giving the calling task the + receive right for the port. The call returns the name of the new + receive right. + + This is very much like creating a receive right with the + `mach_port_allocate' call, with two differences. First, + `mach_reply_port' is a system call and not an RPC (which requires a + reply port). Second, the port created by `mach_reply_port' may be + optimized for use as a reply port. + + The function returns `MACH_PORT_NULL' if a resource shortage + prevented the creation of the receive right. + + -- Function: kern_return_t mach_port_allocate_name (ipc_space_t TASK, + mach_port_right_t RIGHT, mach_port_t NAME) + The function `mach_port_allocate_name' creates a new right in the + specified task, with a specified name for the new right. NAME + must not already be in use for some right, and it can't be the + reserved values `MACH_PORT_NULL' and `MACH_PORT_DEAD'. + + The RIGHT argument takes the following values: + + `MACH_PORT_RIGHT_RECEIVE' + `mach_port_allocate_name' creates a port. The new port is + not a member of any port set. It doesn't have any extant + send or send-once rights. Its make-send count is zero, its + sequence number is zero, its queue limit is + `MACH_PORT_QLIMIT_DEFAULT', and it has no queued messages. + NAME denotes the receive right for the new port. + + TASK does not hold send rights for the new port, only the + receive right. `mach_port_insert_right' and + `mach_port_extract_right' can be used to convert the receive + right into a combined send/receive right. + + `MACH_PORT_RIGHT_PORT_SET' + `mach_port_allocate_name' creates a port set. The new port + set has no members. + + `MACH_PORT_RIGHT_DEAD_NAME' + `mach_port_allocate_name' creates a new dead name. The new + dead name has one user reference. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if + RIGHT was invalid or NAME was `MACH_PORT_NULL' or + `MACH_PORT_DEAD', `KERN_NAME_EXISTS' if NAME was already in use + for a port right and `KERN_RESOURCE_SHORTAGE' if the kernel ran + out of memory. + + The `mach_port_allocate_name' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return `mach_msg' + return codes. + + +File: mach.info, Node: Port Destruction, Next: Port Names, Prev: Port Creation, Up: Port Manipulation Interface + +4.3.2 Port Destruction +---------------------- + + -- Function: kern_return_t mach_port_deallocate (ipc_space_t TASK, + mach_port_t NAME) + The function `mach_port_deallocate' releases a user reference for a + right in TASK's IPC name space. It allows a task to release a + user reference for a send or send-once right without failing if + the port has died and the right is now actually a dead name. + + If NAME denotes a dead name, send right, or send-once right, then + the right loses one user reference. If it only had one user + reference, then the right is destroyed. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME + denoted an invalid right. + + The `mach_port_deallocate' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return `mach_msg' + return codes. + + -- Function: kern_return_t mach_port_destroy (ipc_space_t TASK, + mach_port_t NAME) + The function `mach_port_destroy' deallocates all rights denoted by + a name. The name becomes immediately available for reuse. + + For most purposes, `mach_port_mod_refs' and `mach_port_deallocate' + are preferable. + + If NAME denotes a port set, then all members of the port set are + implicitly removed from the port set. + + If NAME denotes a receive right that is a member of a port set, + the receive right is implicitly removed from the port set. If + there is a port-destroyed request registered for the port, then + the receive right is not actually destroyed, but instead is sent + in a port-destroyed notification to the backup port. If there is + no registered port-destroyed request, remaining messages queued to + the port are destroyed and extant send and send-once rights turn + into dead names. If those send and send-once rights have + dead-name requests registered, then dead-name notifications are + generated for them. + + If NAME denotes a send-once right, then the send-once right is + used to produce a send-once notification for the port. + + If NAME denotes a send-once, send, and/or receive right, and it + has a dead-name request registered, then the registered send-once + right is used to produce a port-deleted notification for the name. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + NAME did not denote a right. + + The `mach_port_destroy' call is actually an RPC to TASK, normally + a send right for a task port, but potentially any send right. In + addition to the normal diagnostic return codes from the call's + server (normally the kernel), the call may return `mach_msg' + return codes. + + +File: mach.info, Node: Port Names, Next: Port Rights, Prev: Port Destruction, Up: Port Manipulation Interface + +4.3.3 Port Names +---------------- + + -- Function: kern_return_t mach_port_names (ipc_space_t TASK, + mach_port_array_t *NAMES, mach_msg_type_number_t *NCOUNT, + mach_port_type_array_t *TYPES, mach_msg_type_number_t *TCOUNT) + The function `mach_port_names' returns information about TASK's + port name space. For each name, it also returns what type of + rights TASK holds. (The same information returned by + `mach_port_type'.) NAMES and TYPES are arrays that are + automatically allocated when the reply message is received. The + user should `vm_deallocate' them when the data is no longer needed. + + `mach_port_names' will return in NAMES the names of the ports, + port sets, and dead names in the task's port name space, in no + particular order and in NCOUNT the number of names returned. It + will return in TYPES the type of each corresponding name, which + indicates what kind of rights the task holds with that name. + TCOUNT should be the same as NCOUNT. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_RESOURCE_SHORTAGE' + if the kernel ran out of memory. + + The `mach_port_names' call is actually an RPC to TASK, normally a + send right for a task port, but potentially any send right. In + addition to the normal diagnostic return codes from the call's + server (normally the kernel), the call may return `mach_msg' + return codes. + + -- Function: kern_return_t mach_port_type (ipc_space_t TASK, + mach_port_t NAME, mach_port_type_t *PTYPE) + The function `mach_port_type' returns information about TASK's + rights for a specific name in its port name space. The returned + PTYPE is a bitmask indicating what rights TASK holds for the port, + port set or dead name. The bitmask is composed of the following + bits: + + `MACH_PORT_TYPE_SEND' + The name denotes a send right. + + `MACH_PORT_TYPE_RECEIVE' + The name denotes a receive right. + + `MACH_PORT_TYPE_SEND_ONCE' + The name denotes a send-once right. + + `MACH_PORT_TYPE_PORT_SET' + The name denotes a port set. + + `MACH_PORT_TYPE_DEAD_NAME' + The name is a dead name. + + `MACH_PORT_TYPE_DNREQUEST' + A dead-name request has been registered for the right. + + `MACH_PORT_TYPE_MAREQUEST' + A msg-accepted request for the right is pending. + + `MACH_PORT_TYPE_COMPAT' + The port right was created in the compatibility mode. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid and `KERN_INVALID_NAME' if + NAME did not denote a right. + + The `mach_port_type' call is actually an RPC to TASK, normally a + send right for a task port, but potentially any send right. In + addition to the normal diagnostic return codes from the call's + server (normally the kernel), the call may return `mach_msg' + return codes. + + -- Function: kern_return_t mach_port_rename (ipc_space_t TASK, + mach_port_t OLD_NAME, mach_port_t NEW_NAME) + The function `mach_port_rename' changes the name by which a port, + port set, or dead name is known to TASK. OLD_NAME is the original + name and NEW_NAME the new name for the port right. NEW_NAME must + not already be in use, and it can't be the distinguished values + `MACH_PORT_NULL' and `MACH_PORT_DEAD'. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + OLD_NAME did not denote a right, `KERN_INVALID_VALUE' if NEW_NAME + was `MACH_PORT_NULL' or `MACH_PORT_DEAD', `KERN_NAME_EXISTS' if + `new_name' already denoted a right and `KERN_RESOURCE_SHORTAGE' if + the kernel ran out of memory. + + The `mach_port_rename' call is actually an RPC to TASK, normally a + send right for a task port, but potentially any send right. In + addition to the normal diagnostic return codes from the call's + server (normally the kernel), the call may return `mach_msg' + return codes. + + +File: mach.info, Node: Port Rights, Next: Ports and other Tasks, Prev: Port Names, Up: Port Manipulation Interface + +4.3.4 Port Rights +----------------- + + -- Function: kern_return_t mach_port_get_refs (ipc_space_t TASK, + mach_port_t NAME, mach_port_right_t RIGHT, + mach_port_urefs_t *REFS) + The function `mach_port_get_refs' returns the number of user + references a task has for a right. + + The RIGHT argument takes the following values: + * `MACH_PORT_RIGHT_SEND' + + * `MACH_PORT_RIGHT_RECEIVE' + + * `MACH_PORT_RIGHT_SEND_ONCE' + + * `MACH_PORT_RIGHT_PORT_SET' + + * `MACH_PORT_RIGHT_DEAD_NAME' + + If NAME denotes a right, but not the type of right specified, then + zero is returned. Otherwise a positive number of user references + is returned. Note that a name may simultaneously denote send and + receive rights. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if + RIGHT was invalid and `KERN_INVALID_NAME' if NAME did not denote a + right. + + The `mach_port_get_refs' call is actually an RPC to TASK, normally + a send right for a task port, but potentially any send right. In + addition to the normal diagnostic return codes from the call's + server (normally the kernel), the call may return `mach_msg' + return codes. + + -- Function: kern_return_t mach_port_mod_refs (ipc_space_t TASK, + mach_port_t NAME, mach_port_right_t RIGHT, + mach_port_delta_t DELTA) + The function `mach_port_mod_refs' requests that the number of user + references a task has for a right be changed. This results in the + right being destroyed, if the number of user references is changed + to zero. The task holding the right is TASK, NAME should denote + the specified right. RIGHT denotes the type of right being + modified. DELTA is the signed change to the number of user + references. + + The RIGHT argument takes the following values: + * `MACH_PORT_RIGHT_SEND' + + * `MACH_PORT_RIGHT_RECEIVE' + + * `MACH_PORT_RIGHT_SEND_ONCE' + + * `MACH_PORT_RIGHT_PORT_SET' + + * `MACH_PORT_RIGHT_DEAD_NAME' + + The number of user references for the right is changed by the + amount DELTA, subject to the following restrictions: port sets, + receive rights, and send-once rights may only have one user + reference. The resulting number of user references can't be + negative. If the resulting number of user references is zero, the + effect is to deallocate the right. For dead names and send + rights, there is an implementation-defined maximum number of user + references. + + If the call destroys the right, then the effect is as described for + `mach_port_destroy', with the exception that `mach_port_destroy' + simultaneously destroys all the rights denoted by a name, while + `mach_port_mod_refs' can only destroy one right. The name will be + available for reuse if it only denoted the one right. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if + RIGHT was invalid or the user-reference count would become + negative, `KERN_INVALID_NAME' if NAME did not denote a right, + `KERN_INVALID_RIGHT' if NAME denoted a right, but not the + specified right and `KERN_UREFS_OVERFLOW' if the user-reference + count would overflow. + + The `mach_port_mod_refs' call is actually an RPC to TASK, normally + a send right for a task port, but potentially any send right. In + addition to the normal diagnostic return codes from the call's + server (normally the kernel), the call may return `mach_msg' + return codes. + + +File: mach.info, Node: Ports and other Tasks, Next: Receive Rights, Prev: Port Rights, Up: Port Manipulation Interface + +4.3.5 Ports and other Tasks +--------------------------- + + -- Function: kern_return_t mach_port_insert_right (ipc_space_t TASK, + mach_port_t NAME, mach_port_t RIGHT, + mach_msg_type_name_t RIGHT_TYPE) + The function MACH_PORT_INSERT_RIGHT inserts into TASK the caller's + right for a port, using a specified name for the right in the + target task. + + The specified NAME can't be one of the reserved values + `MACH_PORT_NULL' or `MACH_PORT_DEAD'. The RIGHT can't be + `MACH_PORT_NULL' or `MACH_PORT_DEAD'. + + The argument RIGHT_TYPE specifies a right to be inserted and how + that right should be extracted from the caller. It should be a + value appropriate for MSGT_NAME; see `mach_msg'. If RIGHT_TYPE is + `MACH_MSG_TYPE_MAKE_SEND', `MACH_MSG_TYPE_MOVE_SEND', or + `MACH_MSG_TYPE_COPY_SEND', then a send right is inserted. If the + target already holds send or receive rights for the port, then + NAME should denote those rights in the target. Otherwise, NAME + should be unused in the target. If the target already has send + rights, then those send rights gain an additional user reference. + Otherwise, the target gains a send right, with a user reference + count of one. + + If RIGHT_TYPE is `MACH_MSG_TYPE_MAKE_SEND_ONCE' or + `MACH_MSG_TYPE_MOVE_SEND_ONCE', then a send-once right is inserted. + The name should be unused in the target. The target gains a + send-once right. + + If RIGHT_TYPE is `MACH_MSG_TYPE_MOVE_RECEIVE', then a receive + right is inserted. If the target already holds send rights for the + port, then name should denote those rights in the target. + Otherwise, name should be unused in the target. The receive right + is moved into the target task. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if + RIGHT was not a port right or NAME was `MACH_PORT_NULL' or + `MACH_PORT_DEAD', `KERN_NAME_EXISTS' if NAME already denoted a + right, `KERN_INVALID_CAPABILITY' if RIGHT was `MACH_PORT_NULL' or + `MACH_PORT_DEAD' `KERN_RIGHT_EXISTS' if TASK already had rights + for the port, with a different name, `KERN_UREFS_OVERFLOW' if the + user-reference count would overflow and `KERN_RESOURCE_SHORTAGE' + if the kernel ran out of memory. + + The `mach_port_insert_right' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return + `mach_msg' return codes. + + -- Function: kern_return_t mach_port_extract_right (ipc_space_t TASK, + mach_port_t NAME, mach_msg_type_name_t DESIRED_TYPE, + mach_port_t *RIGHT, mach_msg_type_name_t *ACQUIRED_TYPE) + The function MACH_PORT_EXTRACT_RIGHT extracts a port right from + the target TASK and returns it to the caller as if the task sent + the right voluntarily, using DESIRED_TYPE as the value of + MSGT_NAME. *Note Mach Message Call::. + + The returned value of ACQUIRED_TYPE will be + `MACH_MSG_TYPE_PORT_SEND' if a send right is extracted, + `MACH_MSG_TYPE_PORT_RECEIVE' if a receive right is extracted, and + `MACH_MSG_TYPE_PORT_SEND_ONCE' if a send-once right is extracted. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted + a right, but an invalid one, `KERN_INVALID_VALUE' if DESIRED_TYPE + was invalid. + + The `mach_port_extract_right' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return `mach_msg' + return codes. + + +File: mach.info, Node: Receive Rights, Next: Port Sets, Prev: Ports and other Tasks, Up: Port Manipulation Interface + +4.3.6 Receive Rights +-------------------- + + -- Data type: mach_port_seqno_t + The `mach_port_seqno_t' data type is an `unsigned int' which + contains the sequence number of a port. + + -- Data type: mach_port_mscount_t + The `mach_port_mscount_t' data type is an `unsigned int' which + contains the make-send count for a port. + + -- Data type: mach_port_msgcount_t + The `mach_port_msgcount_t' data type is an `unsigned int' which + contains a number of messages. + + -- Data type: mach_port_rights_t + The `mach_port_rights_t' data type is an `unsigned int' which + contains a number of rights for a port. + + -- Data type: mach_port_status_t + This structure contains some status information about a port, + which can be queried with `mach_port_get_receive_status'. It has + the following members: + + `mach_port_t mps_pset' + The containing port set. + + `mach_port_seqno_t mps_seqno' + The sequence number. + + `mach_port_mscount_t mps_mscount' + The make-send count. + + `mach_port_msgcount_t mps_qlimit' + The maximum number of messages in the queue. + + `mach_port_msgcount_t mps_msgcount' + The current number of messages in the queue. + + `mach_port_rights_t mps_sorights' + The number of send-once rights that exist. + + `boolean_t mps_srights' + `TRUE' if send rights exist. + + `boolean_t mps_pdrequest' + `TRUE' if port-deleted notification is requested. + + `boolean_t mps_nsrequest' + `TRUE' if no-senders notification is requested. + + -- Function: kern_return_t mach_port_get_receive_status + (ipc_space_t TASK, mach_port_t NAME, + mach_port_status_t *STATUS) + The function `mach_port_get_receive_status' returns the current + status of the specified receive right. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME + denoted a right, but not a receive right. + + The `mach_port_get_receive_status' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return + `mach_msg' return codes. + + -- Function: kern_return_t mach_port_set_mscount (ipc_space_t TASK, + mach_port_t NAME, mach_port_mscount_t MSCOUNT) + The function `mach_port_set_mscount' changes the make-send count of + TASK's receive right named NAME to MSCOUNT. All values for + MSCOUNT are valid. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME + denoted a right, but not a receive right. + + The `mach_port_set_mscount' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return + `mach_msg' return codes. + + -- Function: kern_return_t mach_port_set_qlimit (ipc_space_t TASK, + mach_port_t NAME, mach_port_msgcount_t QLIMIT) + The function `mach_port_set_qlimit' changes the queue limit TASK's + receive right named NAME to QLIMIT. Valid values for QLIMIT are + between zero and `MACH_PORT_QLIMIT_MAX', inclusive. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted + a right, but not a receive right and `KERN_INVALID_VALUE' if + QLIMIT was invalid. + + The `mach_port_set_qlimit' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return + `mach_msg' return codes. + + -- Function: kern_return_t mach_port_set_seqno (ipc_space_t TASK, + mach_port_t NAME, mach_port_seqno_t SEQNO) + The function `mach_port_set_seqno' changes the sequence number + TASK's receive right named NAME to SEQNO. All sequence number + values are valid. The next message received from the port will be + stamped with the specified sequence number. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME + denoted a right, but not a receive right. + + The `mach_port_set_seqno' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return + `mach_msg' return codes. + + +File: mach.info, Node: Port Sets, Next: Request Notifications, Prev: Receive Rights, Up: Port Manipulation Interface + +4.3.7 Port Sets +--------------- + + -- Function: kern_return_t mach_port_get_set_status (ipc_space_t TASK, + mach_port_t NAME, mach_port_array_t *MEMBERS, + mach_msg_type_number_t *COUNT) + The function `mach_port_get_set_status' returns the members of a + port set. MEMBERS is an array that is automatically allocated + when the reply message is received. The user should + `vm_deallocate' it when the data is no longer needed. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted + a right, but not a receive right and `KERN_RESOURCE_SHORTAGE' if + the kernel ran out of memory. + + The `mach_port_get_set_status' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return `mach_msg' + return codes. + + -- Function: kern_return_t mach_port_move_member (ipc_space_t TASK, + mach_port_t MEMBER, mach_port_t AFTER) + The function MACH_PORT_MOVE_MEMBER moves the receive right MEMBER + into the port set AFTER. If the receive right is already a member + of another port set, it is removed from that set first (the whole + operation is atomic). If the port set is `MACH_PORT_NULL', then + the receive right is not put into a port set, but removed from its + current port set. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if + MEMBER or AFTER did not denote a right, `KERN_INVALID_RIGHT' if + MEMBER denoted a right, but not a receive right or AFTER denoted a + right, but not a port set, and `KERN_NOT_IN_SET' if AFTER was + `MACH_PORT_NULL', but `member' wasn't currently in a port set. + + The `mach_port_move_member' call is actually an RPC to TASK, + normally a send right for a task port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return + `mach_msg' return codes. + + +File: mach.info, Node: Request Notifications, Prev: Port Sets, Up: Port Manipulation Interface + +4.3.8 Request Notifications +--------------------------- + + -- Function: kern_return_t mach_port_request_notification + (ipc_space_t TASK, mach_port_t NAME, mach_msg_id_t VARIANT, + mach_port_mscount_t SYNC, mach_port_t NOTIFY, + mach_msg_type_name_t NOTIFY_TYPE, mach_port_t *PREVIOUS) + The function `mach_port_request_notification' registers a request + for a notification and supplies the send-once right NOTIFY to + which the notification will be sent. The NOTIFY_TYPE denotes the + IPC type for the send-once right, which can be + `MACH_MSG_TYPE_MAKE_SEND_ONCE' or `MACH_MSG_TYPE_MOVE_SEND_ONCE'. + It is an atomic swap, returning the previously registered + send-once right (or `MACH_PORT_NULL' for none) in PREVIOUS. A + previous notification request may be cancelled by providing + `MACH_PORT_NULL' for NOTIFY. + + The VARIANT argument takes the following values: + + `MACH_NOTIFY_PORT_DESTROYED' + SYNC must be zero. The NAME must specify a receive right, + and the call requests a port-destroyed notification for the + receive right. If the receive right were to have been + destroyed, say by `mach_port_destroy', then instead the + receive right will be sent in a port-destroyed notification + to the registered send-once right. + + `MACH_NOTIFY_DEAD_NAME' + The call requests a dead-name notification. NAME specifies + send, receive, or send-once rights for a port. If the port + is destroyed (and the right remains, becoming a dead name), + then a dead-name notification which carries the name of the + right will be sent to the registered send-once right. If + NOTIFY is not null and sync is non-zero, the name may specify + a dead name, and a dead-name notification is immediately + generated. + + Whenever a dead-name notification is generated, the user + reference count of the dead name is incremented. For + example, a send right with two user refs has a registered + dead-name request. If the port is destroyed, the send right + turns into a dead name with three user refs (instead of two), + and a dead-name notification is generated. + + If the name is made available for reuse, perhaps because of + `mach_port_destroy' or `mach_port_mod_refs', or the name + denotes a send-once right which has a message sent to it, + then the registered send-once right is used to generate a + port-deleted notification. + + `MACH_NOTIFY_NO_SENDERS' + The call requests a no-senders notification. NAME must + specify a receive right. If NOTIFY is not null, and the + receive right's make-send count is greater than or equal to + the sync value, and it has no extant send rights, than an + immediate no-senders notification is generated. Otherwise + the notification is generated when the receive right next + loses its last extant send right. In either case, any + previously registered send-once right is returned. + + The no-senders notification carries the value the port's + make-send count had when it was generated. The make-send + count is incremented whenever `MACH_MSG_TYPE_MAKE_SEND' is + used to create a new send right from the receive right. The + make-send count is reset to zero when the receive right is + carried in a message. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if + VARIANT was invalid, `KERN_INVALID_NAME' if NAME did not denote a + right, `KERN_INVALID_RIGHT' if NAME denoted an invalid right and + `KERN_INVALID_CAPABILITY' if NOTIFY was invalid. + + When using `MACH_NOTIFY_PORT_DESTROYED', the function returns + `KERN_INVALID_VALUE' if SYNC wasn't zero. + + When using `MACH_NOTIFY_DEAD_NAME', the function returns + `KERN_RESOURCE_SHORTAGE' if the kernel ran out of memory, + `KERN_INVALID_ARGUMENT' if NAME denotes a dead name, but SYNC is + zero or NOTIFY is `MACH_PORT_NULL', and `KERN_UREFS_OVERFLOW' if + NAME denotes a dead name, but generating an immediate dead-name + notification would overflow the name's user-reference count. + + The `mach_port_request_notification' call is actually an RPC to + TASK, normally a send right for a task port, but potentially any + send right. In addition to the normal diagnostic return codes + from the call's server (normally the kernel), the call may return + `mach_msg' return codes. + + +File: mach.info, Node: Virtual Memory Interface, Next: External Memory Management, Prev: Inter Process Communication, Up: Top + +5 Virtual Memory Interface +************************** + + -- Data type: vm_task_t + This is a `task_t' (and as such a `mach_port_t'), which holds a + port name associated with a port that represents a virtual memory + map in the kernel. An virtual memory map is used by the kernel to + manage the address space of a task. The virtual memory map + doesn't get a port name of its own. Instead the port name of the + task provided with the virtual memory is used to name the virtual + memory map of the task (as is indicated by the fact that the type + of `vm_task_t' is actually `task_t'). + + The virtual memory maps of tasks are the only ones accessible + outside of the kernel. + +* Menu: + +* Memory Allocation:: Allocation of new virtual memory. +* Memory Deallocation:: Freeing unused virtual memory. +* Data Transfer:: Reading, writing and copying memory. +* Memory Attributes:: Tweaking memory regions. +* Mapping Memory Objects:: How to map memory objects. +* Memory Statistics:: How to get statistics about memory usage. + + +File: mach.info, Node: Memory Allocation, Next: Memory Deallocation, Up: Virtual Memory Interface + +5.1 Memory Allocation +===================== + + -- Function: kern_return_t vm_allocate (vm_task_t TARGET_TASK, + vm_address_t *ADDRESS, vm_size_t SIZE, boolean_t ANYWHERE) + The function `vm_allocate' allocates a region of virtual memory, + placing it in the specified TASK's address space. + + The starting address is ADDRESS. If the ANYWHERE option is false, + an attempt is made to allocate virtual memory starting at this + virtual address. If this address is not at the beginning of a + virtual page, it will be rounded down to one. If there is not + enough space at this address, no memory will be allocated. If the + ANYWHERE option is true, the input value of this address will be + ignored, and the space will be allocated wherever it is available. + In either case, the address at which memory was actually + allocated will be returned in ADDRESS. + + SIZE is the number of bytes to allocate (rounded by the system in + a machine dependent way to an integral number of virtual pages). + + If ANYWHERE is true, the kernel should find and allocate any + region of the specified size, and return the address of the + resulting region in address address, rounded to a virtual page + boundary if there is sufficient space. + + The physical memory is not actually allocated until the new virtual + memory is referenced. By default, the kernel rounds all addresses + down to the nearest page boundary and all memory sizes up to the + nearest page size. The global variable `vm_page_size' contains + the page size. `mach_task_self' returns the value of the current + task port which should be used as the TARGET_TASK argument in + order to allocate memory in the caller's address space. For + languages other than C, these values can be obtained by the calls + `vm_statistics' and `mach_task_self'. Initially, the pages of + allocated memory will be protected to allow all forms of access, + and will be inherited in child tasks as a copy. Subsequent calls + to `vm_protect' and `vm_inherit' may be used to change these + properties. The allocated region is always zero-filled. + + The function returns `KERN_SUCCESS' if the memory was successfully + allocated, `KERN_INVALID_ADDRESS' if an invalid address was + specified and `KERN_NO_SPACE' if there was not enough space left to + satisfy the request. + + +File: mach.info, Node: Memory Deallocation, Next: Data Transfer, Prev: Memory Allocation, Up: Virtual Memory Interface + +5.2 Memory Deallocation +======================= + + -- Function: kern_return_t vm_deallocate (vm_task_t TARGET_TASK, + vm_address_t ADDRESS, vm_size_t SIZE) + `vm_deallocate' relinquishes access to a region of a TASK's + address space, causing further access to that memory to fail. This + address range will be available for reallocation. ADDRESS is the + starting address, which will be rounded down to a page boundary. + SIZE is the number of bytes to deallocate, which will be rounded + up to give a page boundary. Note, that because of the rounding to + virtual page boundaries, more than SIZE bytes may be deallocated. + Use `vm_page_size' or `vm_statistics' to find out the current + virtual page size. + + This call may be used to deallocte memory that was passed to a + task in a message (via out of line data). In that case, the + rounding should cause no trouble, since the region of memory was + allocated as a set of pages. + + The `vm_deallocate' call affects only the task specified by the + TARGET_TASK. Other tasks which may have access to this memory may + continue to reference it. + + The function returns `KERN_SUCCESS' if the memory was successfully + deallocated and `KERN_INVALID_ADDRESS' if an invalid or + non-allocated address was specified. + + +File: mach.info, Node: Data Transfer, Next: Memory Attributes, Prev: Memory Deallocation, Up: Virtual Memory Interface + +5.3 Data Transfer +================= + + -- Function: kern_return_t vm_read (vm_task_t TARGET_TASK, + vm_address_t ADDRESS, vm_size_t SIZE, vm_offset_t *DATA, + mach_msg_type_number_t *DATA_COUNT) + The function `vm_read' allows one task's virtual memory to be read + by another task. The TARGET_TASK is the task whose memory is to + be read. ADDRESS is the first address to be read and must be on a + page boundary. SIZE is the number of bytes of data to be read and + must be an integral number of pages. DATA is the array of data + copied from the given task, and DATA_COUNT is the size of the data + array in bytes (will be an integral number of pages). + + Note that the data array is returned in a newly allocated region; + the task reading the data should `vm_deallocate' this region when + it is done with the data. + + The function returns `KERN_SUCCESS' if the memory was successfully + read, `KERN_INVALID_ADDRESS' if an invalid or non-allocated address + was specified or there was not SIZE bytes of data following the + address, `KERN_INVALID_ARGUMENT' if the address does not start on a + page boundary or the size is not an integral number of pages, + `KERN_PROTECTION_FAILURE' if the address region in the target task + is protected against reading and `KERN_NO_SPACE' if there was not + enough room in the callers virtual memory to allocate space for + the data to be returned. + + -- Function: kern_return_t vm_write (vm_task_t TARGET_TASK, + vm_address_t ADDRESS, vm_offset_t DATA, + mach_msg_type_number_t DATA_COUNT) + The function `vm_write' allows a task to write to the vrtual memory + of TARGET_TASK. ADDRESS is the starting address in task to be + affected. DATA is an array of bytes to be written, and DATA_COUNT + the size of the DATA array. + + The current implementation requires that ADDRESS, DATA and + DATA_COUNT all be page-aligned. Otherwise, + `KERN_INVALID_ARGUMENT' is returned. + + The function returns `KERN_SUCCESS' if the memory was successfully + written, `KERN_INVALID_ADDRESS' if an invalid or non-allocated + address was specified or there was not DATA_COUNT bytes of + allocated memory starting at ADDRESS and `KERN_PROTECTION_FAILURE' + if the address region in the target task is protected against + writing. + + -- Function: kern_return_t vm_copy (vm_task_t TARGET_TASK, + vm_address_t SOURCE_ADDRESS, vm_size_t COUNT, + vm_offset_t DEST_ADDRESS) + The function `vm_copy' causes the source memory range to be copied + to the destination address. The source and destination memory + ranges may overlap. The destination address range must already be + allocated and writable; the source range must be readable. + + `vm_copy' is equivalent to `vm_read' followed by `vm_write'. + + The current implementation requires that ADDRESS, DATA and + DATA_COUNT all be page-aligned. Otherwise, + `KERN_INVALID_ARGUMENT' is returned. + + The function returns `KERN_SUCCESS' if the memory was successfully + written, `KERN_INVALID_ADDRESS' if an invalid or non-allocated + address was specified or there was insufficient memory allocated + at one of the addresses and `KERN_PROTECTION_FAILURE' if the + destination region was not writable or the source region was not + readable. + + +File: mach.info, Node: Memory Attributes, Next: Mapping Memory Objects, Prev: Data Transfer, Up: Virtual Memory Interface + +5.4 Memory Attributes +===================== + + -- Function: kern_return_t vm_region (vm_task_t TARGET_TASK, + vm_address_t *ADDRESS, vm_size_t *SIZE, + vm_prot_t *PROTECTION, vm_prot_t *MAX_PROTECTION, + vm_inherit_t *INHERITANCE, boolean_t *SHARED, + memory_object_name_t *OBJECT_NAME, vm_offset_t *OFFSET) + The function `vm_region' returns a description of the specified + region of TARGET_TASK's virtual address space. `vm_region' begins + at ADDRESS and looks forward through memory until it comes to an + allocated region. If address is within a region, then that region + is used. Various bits of information about the region are + returned. If ADDRESS was not within a region, then ADDRESS is set + to the start of the first region which follows the incoming value. + In this way an entire address space can be scanned. + + The SIZE returned is the size of the located region in bytes. + PROTECTION is the current protection of the region, MAX_PROTECTION + is the maximum allowable protection for this region. INHERITANCE + is the inheritance attribute for this region. SHARED tells if the + region is shared or not. The port OBJECT_NAME identifies the + memory object associated with this region, and OFFSET is the + offset into the pager object that this region begins at. + + The function returns `KERN_SUCCESS' if the memory region was + successfully located and the information returned and + `KERN_NO_SPACE' if there is no region at or above ADDRESS in the + specified task. + + -- Function: kern_return_t vm_protect (vm_task_t TARGET_TASK, + vm_address_t ADDRESS, vm_size_t SIZE, boolean_t SET_MAXIMUM, + vm_prot_t NEW_PROTECTION) + The function `vm_protect' sets the virtual memory access privileges + for a range of allocated addresses in TARGET_TASK's virtual + address space. The protection argument describes a combination of + read, write, and execute accesses that should be _permitted_. + + ADDRESS is the starting address, which will be rounded down to a + page boundary. SIZE is the size in bytes of the region for which + protection is to change, and will be rounded up to give a page + boundary. If SET_MAXIMUM is set, make the protection change apply + to the maximum protection associated with this address range; + otherwise, the current protection on this range is changed. If + the maximum protection is reduced below the current protection, + both will be changed to reflect the new maximum. NEW_PROTECTION + is the new protection value for this region; a set of: + `VM_PROT_READ', `VM_PROT_WRITE', `VM_PROT_EXECUTE'. + + The enforcement of virtual memory protection is machine-dependent. + Nominally read access requires `VM_PROT_READ' permission, write + access requires `VM_PROT_WRITE' permission, and execute access + requires `VM_PROT_EXECUTE' permission. However, some combinations + of access rights may not be supported. In particular, the kernel + interface allows write access to require `VM_PROT_READ' and + `VM_PROT_WRITE' permission and execute access to require + `VM_PROT_READ' permission. + + The function returns `KERN_SUCCESS' if the memory was successfully + protected, `KERN_INVALID_ADDRESS' if an invalid or non-allocated + address was specified and `KERN_PROTECTION_FAILURE' if an attempt + was made to increase the current or maximum protection beyond the + existing maximum protection value. + + -- Function: kern_return_t vm_inherit (vm_task_t TARGET_TASK, + vm_address_t ADDRESS, vm_size_t SIZE, + vm_inherit_t NEW_INHERITANCE) + The function `vm_inherit' specifies how a region of TARGET_TASK's + address space is to be passed to child tasks at the time of task + creation. Inheritance is an attribute of virtual pages, so + ADDRESS to start from will be rounded down to a page boundary and + SIZE, the size in bytes of the region for wihch inheritance is to + change, will be rounded up to give a page boundary. How this + memory is to be inherited in child tasks is specified by + NEW_INHERITANCE. Inheritance is specified by using one of these + following three values: + + `VM_INHERIT_SHARE' + Child tasks will share this memory with this task. + + `VM_INHERIT_COPY' + Child tasks will receive a copy of this region. + + `VM_INHERIT_NONE' + This region will be absent from child tasks. + + Setting `vm_inherit' to `VM_INHERIT_SHARE' and forking a child + task is the only way two Mach tasks can share physical memory. + Remember that all the theads of a given task share all the same + memory. + + The function returns `KERN_SUCCESS' if the memory inheritance was + successfully set and `KERN_INVALID_ADDRESS' if an invalid or + non-allocated address was specified. + + -- Function: kern_return_t vm_wire (host_priv_t HOST_PRIV, + vm_task_t TARGET_TASK, vm_address_t ADDRESS, vm_size_t SIZE, + vm_prot_t ACCESS) + The function `vm_wire' allows privileged applications to control + memory pageability. HOST_PRIV is the privileged host port for the + host on which TARGET_TASK resides. ADDRESS is the starting + address, which will be rounded down to a page boundary. SIZE is + the size in bytes of the region for which protection is to change, + and will be rounded up to give a page boundary. ACCESS specifies + the types of accesses that must not cause page faults. + + The semantics of a successful `vm_wire' operation are that memory + in the specified range will not cause page faults for any accesses + included in access. Data memory can be made non-pageable (wired) + with a access argument of `VM_PROT_READ | VM_PROT_WRITE'. A + special case is that `VM_PROT_NONE' makes the memory pageable. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_HOST' if HOST_PRIV was not the privileged host port, + `KERN_INVALID_TASK' if TASK was not a valid task, + `KERN_INVALID_VALUE' if ACCESS specified an invalid access mode, + `KERN_FAILURE' if some memory in the specified range is not + present or has an inappropriate protection value, and + `KERN_INVALID_ARGUMENT' if unwiring (ACCESS is `VM_PROT_NONE') and + the memory is not already wired. + + The `vm_wire' call is actually an RPC to HOST_PRIV, normally a + send right for a privileged host port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return + `mach_msg' return codes. + + -- Function: kern_return_t vm_machine_attribute (vm_task_t TASK, + vm_address_t ADDRESS, vm_size_t SIZE, vm_prot_t ACCESS, + vm_machine_attribute_t ATTRIBUTE, + vm_machine_attribute_val_t VALUE) + The function `vm_machine_attribute' specifies machine-specific + attributes for a VM mapping, such as cachability, migrability, + replicability. This is used on machines that allow the user + control over the cache (this is the case for MIPS architectures) + or placement of memory pages as in NUMA architectures (Non-Uniform + Memory Access time) such as the IBM ACE multiprocessor. + + Machine-specific attributes can be consider additions to the + machine-independent ones such as protection and inheritance, but + they are not guaranteed to be supported by any given machine. + Moreover, implementations of Mach on new architectures might find + the need for new attribute types and or values besides the ones + defined in the initial implementation. + + The types currently defined are + `MATTR_CACHE' + Controls caching of memory pages + + `MATTR_MIGRATE' + Controls migrability of memory pages + + `MATTR_REPLICATE' + Controls replication of memory pages + + Corresponding values, and meaning of a specific call to + `vm_machine_attribute' + `MATTR_VAL_ON' + Enables the attribute. Being enabled is the default value + for any applicable attribute. + + `MATTR_VAL_OFF' + Disables the attribute, making memory non-cached, or + non-migratable, or non-replicatable. + + `MATTR_VAL_GET' + Returns the current value of the attribute for the memory + segment. If the attribute does not apply uniformly to the + given range the value returned applies to the initial portion + of the segment only. + + `MATTR_VAL_CACHE_FLUSH' + Flush the memory pages from the Cache. The size value in + this case might be meaningful even if not a multiple of the + page size, depending on the implementation. + + `MATTR_VAL_ICACHE_FLUSH' + Same as above, applied to the Instruction Cache alone. + + `MATTR_VAL_DCACHE_FLUSH' + Same as above, applied to the Data Cache alone. + + The function returns `KERN_SUCCESS' if call succeeded, and + `KERN_INVALID_ARGUMENT' if TASK is not a task, or ADDRESS and SIZE + do not define a valid address range in task, or ATTRIBUTE is not a + valid attribute type, or it is not implemented, or VALUE is not a + permissible value for attribute. + + +File: mach.info, Node: Mapping Memory Objects, Next: Memory Statistics, Prev: Memory Attributes, Up: Virtual Memory Interface + +5.5 Mapping Memory Objects +========================== + + -- Function: kern_return_t vm_map (vm_task_t TARGET_TASK, + vm_address_t *ADDRESS, vm_size_t SIZE, vm_address_t MASK, + boolean_t ANYWHERE, memory_object_t MEMORY_OBJECT, + vm_offset_t OFFSET, boolean_t COPY, vm_prot_t CUR_PROTECTION, + vm_prot_t MAX_PROTECTION, vm_inherit_t INHERITANCE) + The function `vm_map' maps a region of virtual memory at the + specified address, for which data is to be supplied by the given + memory object, starting at the given offset within that object. + In addition to the arguments used in `vm_allocate', the `vm_map' + call allows the specification of an address alignment parameter, + and of the initial protection and inheritance values. + + If the memory object in question is not currently in use, the + kernel will perform a `memory_object_init' call at this time. If + the copy parameter is asserted, the specified region of the memory + object will be copied to this address space; changes made to this + object by other tasks will not be visible in this mapping, and + changes made in this mapping will not be visible to others (or + returned to the memory object). + + The `vm_map' call returns once the mapping is established. + Completion of the call does not require any action on the part of + the memory manager. + + Warning: Only memory objects that are provided by bona fide memory + managers should be used in the `vm_map' call. A memory manager + must implement the memory object interface described elsewhere in + this manual. If other ports are used, a thread that accesses the + mapped virtual memory may become permanently hung or may receive a + memory exception. + + TARGET_TASK is the task to be affected. The starting address is + ADDRESS. If the ANYWHERE option is used, this address is ignored. + The address actually allocated will be returned in ADDRESS. SIZE + is the number of bytes to allocate (rounded by the system in a + machine dependent way). The alignment restriction is specified by + MASK. Bits asserted in this mask must not be asserted in the + address returned. If ANYWHERE is set, the kernel should find and + allocate any region of the specified size, and return the address + of the resulting region in ADDRESS. + + MEMORY_OBJECT is the port that represents the memory object: used + by user tasks in `vm_map'; used by the make requests for data or + other management actions. If this port is `MEMORY_OBJECT_NULL', + then zero-filled memory is allocated instead. Within a memory + object, OFFSET specifes an offset in bytes. This must be page + aligned. If COPY is set, the range of the memory object should be + copied to the target task, rather than mapped read-write. + + The function returns `KERN_SUCCESS' if the object is mapped, + `KERN_NO_SPACE' if no unused region of the task's virtual address + space that meets the address, size, and alignment criteria could be + found, and `KERN_INVALID_ARGUMENT' if an invalid argument was + provided. + + +File: mach.info, Node: Memory Statistics, Prev: Mapping Memory Objects, Up: Virtual Memory Interface + +5.6 Memory Statistics +===================== + + -- Data type: vm_statistics_data_t + This structure is returned in VM_STATS by the `vm_statistics' + function and provides virtual memory statistics for the system. + It has the following members: + + `long pagesize' + The page size in bytes. + + `long free_count' + The number of free pages. + + `long active_count' + The umber of active pages. + + `long inactive_count' + The number of inactive pages. + + `long wire_count' + The number of pages wired down. + + `long zero_fill_count' + The number of zero filled pages. + + `long reactivations' + The number of reactivated pages. + + `long pageins' + The number of pageins. + + `long pageouts' + The number of pageouts. + + `long faults' + The number of faults. + + `long cow_faults' + The number of copy-on-writes. + + `long lookups' + The number of object cache lookups. + + `long hits' + The number of object cache hits. + + -- Function: kern_return_t vm_statistics (vm_task_t TARGET_TASK, + vm_statistics_data_t *VM_STATS) + The function `vm_statistics' returns the statistics about the + kernel's use of virtual memory since the kernel was booted. + `pagesize' can also be found as a global variable `vm_page_size' + which is set at task initialization and remains constant for the + life of the task. + + +File: mach.info, Node: External Memory Management, Next: Threads and Tasks, Prev: Virtual Memory Interface, Up: Top + +6 External Memory Management +**************************** + +* Menu: + +* Memory Object Server:: The basics of external memory management. +* Memory Object Creation:: How new memory objects are created. +* Memory Object Termination:: How memory objects are terminated. +* Memory Objects and Data:: Data transfer to and from memory objects. +* Memory Object Locking:: How memory objects are locked. +* Memory Object Attributes:: Manipulating attributes of memory objects. +* Default Memory Manager:: Setting and using the default memory manager. + + +File: mach.info, Node: Memory Object Server, Next: Memory Object Creation, Up: External Memory Management + +6.1 Memory Object Server +======================== + + -- Function: boolean_t memory_object_server (msg_header_t *IN_MSG, + msg_header_t *OUT_MSG) + -- Function: boolean_t memory_object_default_server + (msg_header_t *IN_MSG, msg_header_t *OUT_MSG) + -- Function: boolean_t seqnos_memory_object_server + (msg_header_t *IN_MSG, msg_header_t *OUT_MSG) + -- Function: boolean_t seqnos_memory_object_default_server + (msg_header_t *IN_MSG, msg_header_t *OUT_MSG) + A memory manager is a server task that responds to specific + messages from the kernel in order to handle memory management + functions for the kernel. + + In order to isolate the memory manager from the specifics of + message formatting, the remote procedure call generator produces a + procedure, `memory_object_server', to handle a received message. + This function does all necessary argument handling, and actually + calls one of the following functions: `memory_object_init', + `memory_object_data_write', `memory_object_data_return', + `memory_object_data_request', `memory_object_data_unlock', + `memory_object_lock_completed', `memory_object_copy', + `memory_object_terminate'. The *default memory manager* may get + two additional requests from the kernel: `memory_object_create' + and `memory_object_data_initialize'. The remote procedure call + generator produces a procedure `memory_object_default_server' to + handle those functions specific to the default memory manager. + + The `seqnos_memory_object_server' and + `seqnos_memory_object_default_server' differ from + `memory_object_server' and `memory_object_default_server' in that + they supply message sequence numbers to the server interfaces. + They call the `seqnos_memory_object_*' functions, which complement + the `memory_object_*' set of functions. + + The return value from the `memory_object_server' function indicates + that the message was appropriate to the memory management interface + (returning `TRUE'), or that it could not handle this message + (returning `FALSE'). + + The IN_MSG argument is the message that has been received from the + kernel. The OUT_MSG is a reply message, but this is not used for + this server. + + The function returns `TRUE' to indicate that the message in + question was applicable to this interface, and that the appropriate + routine was called to interpret the message. It returns `FALSE' to + indicate that the message did not apply to this interface, and + that no other action was taken. + + +File: mach.info, Node: Memory Object Creation, Next: Memory Object Termination, Prev: Memory Object Server, Up: External Memory Management + +6.2 Memory Object Creation +========================== + + -- Function: kern_return_t memory_object_init + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, + memory_object_name_t MEMORY_OBJECT_NAME, + vm_size_t MEMORY_OBJECT_PAGE_SIZE) + -- Function: kern_return_t seqnos_memory_object_init + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, + memory_object_name_t MEMORY_OBJECT_NAME, + vm_size_t MEMORY_OBJECT_PAGE_SIZE) + The function `memory_object_init' serves as a notification that the + kernel has been asked to map the given memory object into a task's + virtual address space. Additionally, it provides a port on which + the memory manager may issue cache management requests, and a port + which the kernel will use to name this data region. In the event + that different each will perform a `memory_object_init' call with + new request and name ports. The virtual page size that is used by + the calling kernel is included for planning purposes. + + When the memory manager is prepared to accept requests for data + for this object, it must call `memory_object_ready' with the + attribute. Otherwise the kernel will not process requests on this + object. To reject all mappings of this object, the memory manager + may use `memory_object_destroy'. + + The argument MEMORY_OBJECT is the port that represents the memory + object data, as supplied to the kernel in a `vm_map' call. + MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) + MEMORY_OBJECT_NAME is a port used by the kernel to refer to the + memory object data in reponse to `vm_region' calls. + `memory_object_page_size' is the page size to be used by this + kernel. All data sizes in calls involving this kernel must be an + integral multiple of the page size. Note that different kernels, + indicated by a different `memory_control', may have different page + sizes. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + -- Function: kern_return_t memory_object_ready + (memory_object_control_t MEMORY_CONTROL, + boolean_t MAY_CACHE_OBJECT, + memory_object_copy_strategy_t COPY_STRATEGY) + The function `memory_object_ready' informs the kernel that the + memory manager is ready to receive data or unlock requests on + behalf of the clients. The argument MEMORY_CONTROL is the port, + provided by the kernel in a `memory_object_init' call, to which + cache management requests may be issued. If MAY_CACHE_OBJECT is + set, the kernel may keep data associated with this memory object, + even after virtual memory references to it are gone. + + COPY_STRATEGY tells how the kernel should copy regions of the + associated memory object. There are three possible caching + strategies: `MEMORY_OBJECT_COPY_NONE' which specifies that nothing + special should be done when data in the object is copied; + `MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager + should be notified via a `memory_object_copy' call before any part + of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which + guarantees that the memory manager does not externally modify the + data so that the kernel can use its normal copy-on-write + algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most + commonly used. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + +File: mach.info, Node: Memory Object Termination, Next: Memory Objects and Data, Prev: Memory Object Creation, Up: External Memory Management + +6.3 Memory Object Termination +============================= + + -- Function: kern_return_t memory_object_terminate + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, + memory_object_name_t MEMORY_OBJECT_NAME) + -- Function: kern_return_t seqnos_memory_object_terminate + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, + memory_object_name_t MEMORY_OBJECT_NAME) + The function `memory_object_terminate' indicates that the kernel + has completed its use of the given memory object. All rights to + the memory object control and name ports are included, so that the + memory manager can destroy them (using `mach_port_deallocate') + after doing appropriate bookkeeping. The kernel will terminate a + memory object only after all address space mappings of that memory + object have been deallocated, or upon explicit request by the + memory manager. + + The argument MEMORY_OBJECT is the port that represents the memory + object data, as supplied to the kernel in a `vm_map' call. + MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) + MEMORY_OBJECT_NAME is a port used by the kernel to refer to the + memory object data in reponse to `vm_region' calls. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + -- Function: kern_return_t memory_object_destroy + (memory_object_control_t MEMORY_CONTROL, kern_return_t REASON) + The function `memory_object_destroy' tells the kernel to shut down + the memory object. As a result of this call the kernel will no + longer support paging activity or any `memory_object' calls on this + object, and all rights to the memory object port, the memory + control port and the memory name port will be returned to the + memory manager in a memory_object_terminate call. If the memory + manager is concerned that any modified cached data be returned to + it before the object is terminated, it should call + `memory_object_lock_request' with SHOULD_FLUSH set and a lock + value of `VM_PROT_WRITE' before making this call. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. REASON is an error code indicating why the object must + be destroyed. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + +File: mach.info, Node: Memory Objects and Data, Next: Memory Object Locking, Prev: Memory Object Termination, Up: External Memory Management + +6.4 Memory Objects and Data +=========================== + + -- Function: kern_return_t memory_object_data_return + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t DATA, vm_size_t DATA_COUNT, boolean_t DIRTY, + boolean_t KERNEL_COPY) + -- Function: kern_return_t seqnos_memory_object_data_return + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t DATA, vm_size_t DATA_COUNT, boolean_t DIRTY, + boolean_t KERNEL_COPY) + The function `memory_object_data_return' provides the memory + manager with data that has been modified while cached in physical + memory. Once the memory manager no longer needs this data (e.g., + it has been written to another storage medium), it should be + deallocated using `vm_deallocate'. + + The argument MEMORY_OBJECT is the port that represents the memory + object data, as supplied to the kernel in a `vm_map' call. + MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) OFFSET is + the offset within a memory object to which this call refers. This + will be page aligned. DATA is the data which has been modified + while cached in physical memory. DATA_COUNT is the amount of data + to be written, in bytes. This will be an integral number of + memory object pages. + + The kernel will also use this call to return precious pages. If an + unmodified precious age is returned, DIRTY is set to `FALSE', + otherwise it is `TRUE'. If KERNEL_COPY is `TRUE', the kernel kept + a copy of the page. Precious data remains precious if the kernel + keeps a copy. The indication that the kernel kept a copy is only + a hint if the data is not precious; the cleaned copy may be + discarded without further notifying the manager. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + -- Function: kern_return_t memory_object_data_request + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t LENGTH, vm_prot_t DESIRED_ACCESS) + -- Function: kern_return_t seqnos_memory_object_data_request + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t LENGTH, vm_prot_t DESIRED_ACCESS) + The function `memory_object_data_request' is a request for data + from the specified memory object, for at least the access + specified. The memory manager is expected to return at least the + specified data, with as much access as it can allow, using + `memory_object_data_supply'. If the memory manager is unable to + provide the data (for example, because of a hardware error), it + may use the `memory_object_data_error' call. The + `memory_object_data_unavailable' call may be used to tell the + kernel to supply zero-filled memory for this region. + + The argument MEMORY_OBJECT is the port that represents the memory + object data, as supplied to the kernel in a `vm_map' call. + MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) OFFSET is + the offset within a memory object to which this call refers. This + will be page aligned. LENGTH is the number of bytes of data, + starting at OFFSET, to which this call refers. This will be an + integral number of memory object pages. DESIRED_ACCESS is a + protection value describing the memory access modes which must be + permitted on the specified cached data. One or more of: + `VM_PROT_READ', `VM_PROT_WRITE' or `VM_PROT_EXECUTE'. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + -- Function: kern_return_t memory_object_data_supply + (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t DATA, vm_size_t DATA_COUNT, vm_prot_t LOCK_VALUE, + boolean_t PRECIOUS, mach_port_t REPLY) + The function `memory_object_data_supply' supplies the kernel with + data for the specified memory object. Ordinarily, memory managers + should only provide data in reponse to `memory_object_data_request' + calls from the kernel (but they may provide data in advance as + desired). When data already held by this kernel is provided + again, the new data is ignored. The kernel may not provide any + data (or protection) consistency among pages with different + virtual page alignments within the same object. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. OFFSET is an offset within a memory object in bytes. + This must be page aligned. DATA is the data that is being + provided to the kernel. This is a pointer to the data. + DATA_COUNT is the amount of data to be provided. Only whole + virtual pages of data can be accepted; partial pages will be + discarded. + + LOCK_VALUE is a protection value indicating those forms of access + that should *not* be permitted to the specified cached data. The + lock values must be one or more of the set: `VM_PROT_NONE', + `VM_PROT_READ', `VM_PROT_WRITE', `VM_PROT_EXECUTE' and + `VM_PROT_ALL' as defined in `mach/vm_prot.h'. + + If PRECIOUS is `FALSE', the kernel treats the data as a temporary + and may throw it away if it hasn't been changed. If the PRECIOUS + value is `TRUE', the kernel treats its copy as a data repository + and promises to return it to the manager; the manager may tell the + kernel to throw it away instead by flushing and not cleaning the + data (see `memory_object_lock_request'). + + If REPLY_TO is not `MACH_PORT_NULL', the kernel will send a + completion message to the provided port (see + `memory_object_supply_completed'). + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + -- Function: kern_return_t memory_object_supply_completed + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t LENGTH, kern_return_t RESULT, + vm_offset_t ERROR_OFFSET) + -- Function: kern_return_t seqnos_memory_object_supply_completed + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t LENGTH, kern_return_t RESULT, + vm_offset_t ERROR_OFFSET) + The function `memory_object_supply_completed' indicates that a + previous `memory_object_data_supply' has been completed. Note that + this call is made on whatever port was specified in the + `memory_object_data_supply' call; that port need not be the memory + object port itself. No reply is expected after this call. + + The argument MEMORY_OBJECT is the port that represents the memory + object data, as supplied to the kernel in a `vm_map' call. + MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) OFFSET is + the offset within a memory object to which this call refers. + LENGTH is the length of the data covered by the lock request. The + RESULT parameter indicates what happened during the supply. If it + is not `KERN_SUCCESS', then ERROR_OFFSET identifies the first + offset at which a problem occurred. The pagein operation stopped + at this point. Note that the only failures reported by this + mechanism are `KERN_MEMORY_PRESENT'. All other failures (invalid + argument, error on pagein of supplied data in manager's address + space) cause the entire operation to fail. + + + -- Function: kern_return_t memory_object_data_error + (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t SIZE, kern_return_t REASON) + The function `memory_object_data_error' indicates that the memory + manager cannot return the data requested for the given region, + specifying a reason for the error. This is typically used when a + hardware error is encountered. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. OFFSET is an offset within a memory object in bytes. + This must be page aligned. DATA is the data that is being + provided to the kernel. This is a pointer to the data. SIZE is + the amount of cached data (starting at OFFSET) to be handled. + This must be an integral number of the memory object page size. + REASON is an error code indicating what type of error occured. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + -- Function: kern_return_t memory_object_data_unavailable + (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t SIZE, kern_return_t REASON) + The function `memory_object_data_unavailable' indicates that the + memory object does not have data for the given region and that the + kernel should provide the data for this range. The memory manager + may use this call in three different situations. + + 1. The object was created by `memory_object_create' and the + kernel has not yet provided data for this range (either via a + `memory_object_data_initialize', `memory_object_data_write' or + a `memory_object_data_return' for the object. + + 2. The object was created by an `memory_object_data_copy' and the + kernel should copy this region from the original memory + object. + + 3. The object is a normal user-created memory object and the + kernel should supply unlocked zero-filled pages for the range. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. OFFSET is an offset within a memory object, in bytes. + This must be page aligned. SIZE is the amount of cached data + (starting at OFFSET) to be handled. This must be an integral + number of the memory object page size. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + -- Function: kern_return_t memory_object_copy + (memory_object_t OLD_MEMORY_OBJECT, + memory_object_control_t OLD_MEMORY_CONTROL, + vm_offset_t OFFSET, vm_size_t LENGTH, + memory_object_t NEW_MEMORY_OBJECT) + -- Function: kern_return_t seqnos_memory_object_copy + (memory_object_t OLD_MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t OLD_MEMORY_CONTROL, + vm_offset_t OFFSET, vm_size_t LENGTH, + memory_object_t NEW_MEMORY_OBJECT) + The function `memory_object_copy' indicates that a copy has been + made of the specified range of the given original memory object. + This call includes only the new memory object itself; a + `memory_object_init' call will be made on the new memory object + after the currently cached pages of the original object are + prepared. After the memory manager receives the init call, it + must reply with the `memory_object_ready' call to assert the + "ready" attribute. The kernel will use the new memory object, + control and name ports to refer to the new copy. + + This call is made when the original memory object had the caching + parameter set to `MEMORY_OBJECT_COPY_CALL' and a user of the object + has asked the kernel to copy it. + + Cached pages from the original memory object at the time of the + copy operation are handled as follows: Readable pages may be + silently copied to the new memory object (with all access + permissions). Pages not copied are locked to prevent write access. + + The new memory object is *temporary*, meaning that the memory + manager should not change its contents or allow the memory object + to be mapped in another client. The memory manager may use the + `memory_object_data_unavailable' call to indicate that the + appropriate pages of the original memory object may be used to + fulfill the data request. + + The argument OLD_MEMORY_OBJECT is the port that represents the old + memory object data. OLD_MEMORY_CONTROL is the kernel port for the + old object. OFFSET is the offset within a memory object to which + this call refers. This will be page aligned. LENGTH is the + number of bytes of data, starting at OFFSET, to which this call + refers. This will be an integral number of memory object pages. + NEW_MEMORY_OBJECT is a new memory object created by the kernel; + see synopsis for further description. Note that all port rights + (including receive rights) are included for the new memory object. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + The remaining interfaces in this section are obsolet. + + -- Function: kern_return_t memory_object_data_write + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t DATA, vm_size_t DATA_COUNT) + -- Function: kern_return_t seqnos_memory_object_data_write + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t DATA, vm_size_t DATA_COUNT) + The function `memory_object_data_write' provides the memory manager + with data that has been modified while cached in physical memory. + It is the old form of `memory_object_data_return'. Once the + memory manager no longer needs this data (e.g., it has been written + to another storage medium), it should be deallocated using + `vm_deallocate'. + + The argument MEMORY_OBJECT is the port that represents the memory + object data, as supplied to the kernel in a `vm_map' call. + MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) OFFSET is + the offset within a memory object to which this call refers. This + will be page aligned. DATA is the data which has been modified + while cached in physical memory. DATA_COUNT is the amount of data + to be written, in bytes. This will be an integral number of + memory object pages. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + -- Function: kern_return_t memory_object_data_provided + (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t DATA, vm_size_t DATA_COUNT, vm_prot_t LOCK_VALUE) + The function `memory_object_data_provided' supplies the kernel with + data for the specified memory object. It is the old form of + `memory_object_data_supply'. Ordinarily, memory managers should + only provide data in reponse to `memory_object_data_request' calls + from the kernel. The LOCK_VALUE specifies what type of access + will not be allowed to the data range. The lock values must be + one or more of the set: `VM_PROT_NONE', `VM_PROT_READ', + `VM_PROT_WRITE', `VM_PROT_EXECUTE' and `VM_PROT_ALL' as defined in + `mach/vm_prot.h'. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. OFFSET is an offset within a memory object in bytes. + This must be page aligned. DATA is the data that is being + provided to the kernel. This is a pointer to the data. + DATA_COUNT is the amount of data to be provided. This must be an + integral number of memory object pages. LOCK_VALUE is a + protection value indicating those forms of access that should + *not* be permitted to the specified cached data. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + +File: mach.info, Node: Memory Object Locking, Next: Memory Object Attributes, Prev: Memory Objects and Data, Up: External Memory Management + +6.5 Memory Object Locking +========================= + + -- Function: kern_return_t memory_object_lock_request + (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t SIZE, memory_object_return_t SHOULD_CLEAN, + boolean_t SHOULD_FLUSH, vm_prot_t LOCK_VALUE, + mach_port_t REPLY_TO) + The function `memory_object_lock_request' allows a memory manager + to make cache management requests. As specified in arguments to + the call, the kernel will: + * clean (i.e., write back using `memory_object_data_supply' or + `memory_object_data_write') any cached data which has been + modified since the last time it was written + + * flush (i.e., remove any uses of) that data from memory + + * lock (i.e., prohibit the specified uses of) the cached data + + Locks applied to cached data are not cumulative; new lock values + override previous ones. Thus, data may also be unlocked using this + primitive. The lock values must be one or more of the following + values: `VM_PROT_NONE', `VM_PROT_READ', `VM_PROT_WRITE', + `VM_PROT_EXECUTE' and `VM_PROT_ALL' as defined in `mach/vm_prot.h'. + + Only data which is cached at the time of this call is affected. + When a running thread requires a prohibited access to cached data, + the kernel will issue a `memory_object_data_unlock' call + specifying the forms of access required. + + Once all of the actions requested by this call have been + completed, the kernel issues a `memory_object_lock_completed' call + on the specified reply port. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. OFFSET is an offset within a memory object, in bytes. + This must be page aligned. SIZE is the amount of cached data + (starting at OFFSET) to be handled. This must be an integral + number of the memory object page size. If SHOULD_CLEAN is set, + modified data should be written back to the memory manager. If + SHOULD_FLUSH is set, the specified cached data should be + invalidated, and all uses of that data should be revoked. + LOCK_VALUE is a protection value indicating those forms of access + that should *not* be permitted to the specified cached data. + REPLY_TO is a port on which a `memory_object_lock_comleted' call + should be issued, or `MACH_PORT_NULL' if no acknowledgement is + desired. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + -- Function: kern_return_t memory_object_lock_completed + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t LENGTH) + -- Function: kern_return_t seqnos_memory_object_lock_completed + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t LENGTH) + The function `memory_object_lock_completed' indicates that a + previous `memory_object_lock_request' has been completed. Note + that this call is made on whatever port was specified in the + `memory_object_lock_request' call; that port need not be the memory + object port itself. No reply is expected after this call. + + The argument MEMORY_OBJECT is the port that represents the memory + object data, as supplied to the kernel in a `vm_map' call. + MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) OFFSET is + the offset within a memory object to which this call refers. + LENGTH is the length of the data covered by the lock request. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + -- Function: kern_return_t memory_object_data_unlock + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t LENGTH, vm_prot_t DESIRED_ACCESS) + -- Function: kern_return_t seqnos_memory_object_data_unlock + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_size_t LENGTH, vm_prot_t DESIRED_ACCESS) + The function `memory_object_data_unlock' is a request that the + memory manager permit at least the desired access to the specified + data cached by the kernel. A call to `memory_object_lock_request' + is expected in response. + + The argument MEMORY_OBJECT is the port that represents the memory + object data, as supplied to the kernel in a `vm_map' call. + MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) OFFSET is + the offset within a memory object to which this call refers. This + will be page aligned. LENGTH is the number of bytes of data, + starting at OFFSET, to which this call refers. This will be an + integral number of memory object pages. DESIRED_ACCESS a + protection value describing the memory access modes which must be + permitted on the specified cached data. One or more of: + `VM_PROT_READ', `VM_PROT_WRITE' or `VM_PROT_EXECUTE'. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + +File: mach.info, Node: Memory Object Attributes, Next: Default Memory Manager, Prev: Memory Object Locking, Up: External Memory Management + +6.6 Memory Object Attributes +============================ + + -- Function: kern_return_t memory_object_get_attributes + (memory_object_control_t MEMORY_CONTROL, + boolean_t *OBJECT_READY, boolean_t *MAY_CACHE_OBJECT, + memory_object_copy_strategy_t *COPY_STRATEGY) + The function `memory_object_get_attribute' retrieves the current + attributes associated with the memory object. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. If OBJECT_READY is set, the kernel may issue new data + and unlock requests on the associated memory object. If + MAY_CACHE_OBJECT is set, the kernel may keep data associated with + this memory object, even after virtual memory references to it are + gone. COPY_STRATEGY tells how the kernel should copy regions of + the associated memory object. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + -- Function: kern_return_t memory_object_change_attributes + (memory_object_control_t MEMORY_CONTROL, + boolean_t MAY_CACHE_OBJECT, + memory_object_copy_strategy_t COPY_STRATEGY, + mach_port_t REPLY_TO) + The function `memory_object_change_attribute' sets + performance-related attributes for the specified memory object. + If the caching attribute is asserted, the kernel is permitted (and + encouraged) to maintain cached data for this memory object even + after no virtual address space contains this data. + + There are three possible caching strategies: + `MEMORY_OBJECT_COPY_NONE' which specifies that nothing special + should be done when data in the object is copied; + `MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager + should be notified via a `memory_object_copy' call before any part + of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which + guarantees that the memory manager does not externally modify the + data so that the kernel can use its normal copy-on-write + algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most + commonly used. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. If MAY_CACHE_OBJECT is set, the kernel may keep data + associated with this memory object, even after virtual memory + references to it are gone. COPY_STRATEGY tells how the kernel + should copy regions of the associated memory object. REPLY_TO is + a port on which a `memory_object_change_comleted' call will be + issued upon completion of the attribute change, or + `MACH_PORT_NULL' if no acknowledgement is desired. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + -- Function: kern_return_t memory_object_change_completed + (memory_object_t MEMORY_OBJECT, boolean_t MAY_CACHE_OBJECT, + memory_object_copy_strategy_t COPY_STRATEGY) + -- Function: kern_return_t seqnos_memory_object_change_completed + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + boolean_t MAY_CACHE_OBJECT, + memory_object_copy_strategy_t COPY_STRATEGY) + The function `memory_object_change_completed' indicates the + completion of an attribute change call. + + + The following interface is obsoleted by `memory_object_ready' and +`memory_object_change_attributes'. If the old form +`memory_object_set_attributes' is used to make a memory object ready, +the kernel will write back data using the old +`memory_object_data_write' interface rather than +`memory_object_data_return'.. + + -- Function: kern_return_t memory_object_set_attributes + (memory_object_control_t MEMORY_CONTROL, + boolean OBJECT_READY, boolean_t MAY_CACHE_OBJECT, + memory_object_copy_strategy_t COPY_STRATEGY) + The function `memory_object_set_attribute' controls how the the + memory object. The kernel will only make data or unlock requests + when the ready attribute is asserted. If the caching attribute is + asserted, the kernel is permitted (and encouraged) to maintain + cached data for this memory object even after no virtual address + space contains this data. + + There are three possible caching strategies: + `MEMORY_OBJECT_COPY_NONE' which specifies that nothing special + should be done when data in the object is copied; + `MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager + should be notified via a `memory_object_copy' call before any part + of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which + guarantees that the memory manager does not externally modify the + data so that the kernel can use its normal copy-on-write + algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most + commonly used. + + The argument MEMORY_CONTROL is the port, provided by the kernel in + a `memory_object_init' call, to which cache management requests may + be issued. If OBJECT_READY is set, the kernel may issue new data + and unlock requests on the associated memory object. If + MAY_CACHE_OBJECT is set, the kernel may keep data associated with + this memory object, even after virtual memory references to it are + gone. COPY_STRATEGY tells how the kernel should copy regions of + the associated memory object. + + This routine does not receive a reply message (and consequently + has no return value), so only message transmission errors apply. + + +File: mach.info, Node: Default Memory Manager, Prev: Memory Object Attributes, Up: External Memory Management + +6.7 Default Memory Manager +========================== + + -- Function: kern_return_t vm_set_default_memory_manager (host_t HOST, + mach_port_t *DEFAULT_MANAGER) + The function `vm_set_default_memory_manager' sets the kernel's + default memory manager. It sets the port to which newly-created + temporary memory objects are delivered by `memory_object_create' to + the host. The old memory manager port is returned. If + DEFAULT_MANAGER is `MACH_PORT_NULL' then this routine just returns + the current default manager port without changing it. + + The argument HOST is a task port to the kernel whose default + memory manager is to be changed. DEFAULT_MANAGER is an in/out + parameter. As input, DEFAULT_MANAGER is the port that the new + memory manager is listening on for `memory_object_create' calls. + As output, it is the old default memory manager's port. + + The function returns `KERN_SUCCESS' if the new memory manager is + installed, and `KERN_INVALID_ARGUMENT' if this task does not have + the privileges required for this call. + + -- Function: kern_return_t memory_object_create + (memory_object_t OLD_MEMORY_OBJECT, + memory_object_t NEW_MEMORY_OBJECT, vm_size_t NEW_OBJECT_SIZE, + memory_object_control_t NEW_CONTROL, + memory_object_name_t NEW_NAME, vm_size_t NEW_PAGE_SIZE) + -- Function: kern_return_t seqnos_memory_object_create + (memory_object_t OLD_MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_t NEW_MEMORY_OBJECT, vm_size_t NEW_OBJECT_SIZE, + memory_object_control_t NEW_CONTROL, + memory_object_name_t NEW_NAME, vm_size_t NEW_PAGE_SIZE) + The function `memory_object_create' is a request that the given + memory manager accept responsibility for the given memory object + created by the kernel. This call will only be made to the system + *default memory manager*. The memory object in question initially + consists of zero-filled memory; only memory pages that are + actually written will ever be provided to + `memory_object_data_request' calls, the default memory manager must + use `memory_object_data_unavailable' for any pages that have not + previously been written. + + No reply is expected after this call. Since this call is directed + to the default memory manager, the kernel assumes that it will be + ready to handle data requests to this object and does not need the + confirmation of a `memory_object_set_attributes' call. + + The argument OLD_MEMORY_OBJECT is a memory object provided by the + default memory manager on which the kernel can make + `memory_object_create' calls. NEW_MEMORY_OBJECT is a new memory + object created by the kernel; see synopsis for further + description. Note that all port rights (including receive rights) + are included for the new memory object. NEW_OBJECT_SIZE is the + maximum size of the new object. NEW_CONTROL is a port, created by + the kernel, on which a memory manager may issue cache management + requests for the new object. NEW_NAME a port used by the kernel + to refer to the new memory object data in response to `vm_region' + calls. NEW_PAGE_SIZE is the page size to be used by this kernel. + All data sizes in calls involving this kernel must be an integral + multiple of the page size. Note that different kernels, indicated + by different a `memory_control', may have different page sizes. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + -- Function: kern_return_t memory_object_data_initialize + (memory_object_t MEMORY_OBJECT, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t DATA, vm_size_t DATA_COUNT) + -- Function: kern_return_t seqnos_memory_object_data_initialize + (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO, + memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET, + vm_offset_t DATA, vm_size_t DATA_COUNT) + The function `memory_object_data_initialize' provides the memory + manager with initial data for a kernel-created memory object. If + the memory manager already has been supplied data (by a previous + `memory_object_data_initialize', `memory_object_data_write' or + `memory_object_data_return'), then this data should be ignored. + Otherwise, this call behaves exactly as does + `memory_object_data_return' on memory objects created by the kernel + via `memory_object_create' and thus will only be made to default + memory managers. This call will not be made on objects created via + `memory_object_copy'. + + The argument MEMORY_OBJECT the port that represents the memory + object data, as supplied by the kernel in a `memory_object_create' + call. MEMORY_CONTROL is the request port to which a response is + requested. (In the event that a memory object has been supplied + to more than one the kernel that has made the request.) OFFSET is + the offset within a memory object to which this call refers. This + will be page aligned. DATA os the data which has been modified + while cached in physical memory. DATA_COUNT is the amount of data + to be written, in bytes. This will be an integral number of + memory object pages. + + The function should return `KERN_SUCCESS', but since this routine + is called by the kernel, which does not wait for a reply message, + this value is ignored. + + +File: mach.info, Node: Threads and Tasks, Next: Host Interface, Prev: External Memory Management, Up: Top + +7 Threads and Tasks +******************* + +* Menu: + +* Thread Interface:: Manipulating threads. +* Task Interface:: Manipulating tasks. +* Profiling:: Profiling threads and tasks. + + +File: mach.info, Node: Thread Interface, Next: Task Interface, Up: Threads and Tasks + +7.1 Thread Interface +==================== + + -- Data type: thread_t + This is a `mach_port_t' and used to hold the port name of a thread + port that represents the thread. Manipulations of the thread are + implemented as remote procedure calls to the thread port. A + thread can get a port to itself with the `mach_thread_self' system + call. + +* Menu: + +* Thread Creation:: Creating new threads. +* Thread Termination:: Terminating existing threads. +* Thread Information:: How to get informations on threads. +* Thread Settings:: How to set threads related informations. +* Thread Execution:: How to control the thread's machine state. +* Scheduling:: Operations on thread scheduling. +* Thread Special Ports:: How to handle the thread's special ports. +* Exceptions:: Managing exceptions. + + +File: mach.info, Node: Thread Creation, Next: Thread Termination, Up: Thread Interface + +7.1.1 Thread Creation +--------------------- + + -- Function: kern_return_t thread_create (task_t PARENT_TASK, + thread_t *CHILD_THREAD) + The function `thread_create' creates a new thread within the task + specified by PARENT_TASK. The new thread has no processor state, + and has a suspend count of 1. To get a new thread to run, first + `thread_create' is called to get the new thread's identifier, + (CHILD_THREAD). Then `thread_set_state' is called to set a + processor state, and finally `thread_resume' is called to get the + thread scheduled to execute. + + When the thread is created send rights to its thread kernel port + are given to it and returned to the caller in CHILD_THREAD. The + new thread's exception port is set to `MACH_PORT_NULL'. + + The function returns `KERN_SUCCESS' if a new thread has been + created, `KERN_INVALID_ARGUMENT' if PARENT_TASK is not a valid + task and `KERN_RESOURCE_SHORTAGE' if some critical kernel resource + is not available. + + +File: mach.info, Node: Thread Termination, Next: Thread Information, Prev: Thread Creation, Up: Thread Interface + +7.1.2 Thread Termination +------------------------ + + -- Function: kern_return_t thread_terminate (thread_t TARGET_THREAD) + The function `thread_terminate' destroys the thread specified by + TARGET_THREAD. + + The function returns `KERN_SUCCESS' if the thread has been killed + and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread. + + +File: mach.info, Node: Thread Information, Next: Thread Settings, Prev: Thread Termination, Up: Thread Interface + +7.1.3 Thread Information +------------------------ + + -- Function: thread_t mach_thread_self () + The `mach_thread_self' system call returns the calling thread's + thread port. + + `mach_thread_self' has an effect equivalent to receiving a send + right for the thread port. `mach_thread_self' returns the name of + the send right. In particular, successive calls will increase the + calling task's user-reference count for the send right. + + As a special exception, the kernel will overrun the user reference + count of the thread name port, so that this function can not fail + for that reason. Because of this, the user should not deallocate + the port right if an overrun might have happened. Otherwise the + reference count could drop to zero and the send right be destroyed + while the user still expects to be able to use it. As the kernel + does not make use of the number of extant send rights anyway, this + is safe to do (the thread port itself is not destroyed, even when + there are no send rights anymore). + + The function returns `MACH_PORT_NULL' if a resource shortage + prevented the reception of the send right or if the thread port is + currently null and `MACH_PORT_DEAD' if the thread port is currently + dead. + + -- Function: kern_return_t thread_info (thread_t TARGET_THREAD, + int FLAVOR, thread_info_t THREAD_INFO, + mach_msg_type_number_t *THREAD_INFOCNT) + The function `thread_info' returns the selected information array + for a thread, as specified by FLAVOR. + + THREAD_INFO is an array of integers that is supplied by the caller + and returned filled with specified information. THREAD_INFOCNT is + supplied as the maximum number of integers in THREAD_INFO. On + return, it contains the actual number of integers in THREAD_INFO. + The maximum number of integers returned by any flavor is + `THREAD_INFO_MAX'. + + The type of information returned is defined by FLAVOR, which can + be one of the following: + + `THREAD_BASIC_INFO' + The function returns basic information about the thread, as + defined by `thread_basic_info_t'. This includes the user and + system time, the run state, and scheduling priority. The + number of integers returned is `THREAD_BASIC_INFO_COUNT'. + + `THREAD_SCHED_INFO' + The function returns information about the schduling policy + for the thread as defined by `thread_sched_info_t'. The + number of integers returned is `THREAD_SCHED_INFO_COUNT'. + + The function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or FLAVOR + is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if + the returned info array is too large for THREAD_INFO. In this + case, THREAD_INFO is filled as much as possible and THREAD_INFOCNT + is set to the number of elements that would have been returned if + there were enough room. + + -- Data type: struct thread_basic_info + This structure is returned in THREAD_INFO by the `thread_info' + function and provides basic information about the thread. You can + cast a variable of type `thread_info_t' to a pointer of this type + if you provided it as the THREAD_INFO parameter for the + `THREAD_BASIC_INFO' flavor of `thread_info'. It has the following + members: + + `time_value_t user_time' + user run time + + `time_value_t system_time' + system run time + + `int cpu_usage' + Scaled cpu usage percentage. The scale factor is + `TH_USAGE_SCALE'. + + `int base_priority' + The base scheduling priority of the thread. + + `int cur_priority' + The current scheduling priority of the thread. + + `integer_t run_state' + The run state of the thread. The possible vlues of this + field are: + `TH_STATE_RUNNING' + The thread is running normally. + + `TH_STATE_STOPPED' + The thread is suspended. + + `TH_STATE_WAITING' + The thread is waiting normally. + + `TH_STATE_UNINTERRUPTIBLE' + The thread is in an uninterruptible wait. + + `TH_STATE_HALTED' + The thread is halted at a clean point. + + `flags' + Various flags. The possible values of this field are: + `TH_FLAGS_SWAPPED' + The thread is swapped out. + + `TH_FLAGS_IDLE' + The thread is an idle thread. + + `int suspend_count' + The suspend count for the thread. + + `int sleep_time' + The number of seconds that the thread has been sleeping. + + `time_value_t creation_time' + The time stamp of creation. + + -- Data type: thread_basic_info_t + This is a pointer to a `struct thread_basic_info'. + + -- Data type: struct thread_sched_info + This structure is returned in THREAD_INFO by the `thread_info' + function and provides schedule information about the thread. You + can cast a variable of type `thread_info_t' to a pointer of this + type if you provided it as the THREAD_INFO parameter for the + `THREAD_SCHED_INFO' flavor of `thread_info'. It has the following + members: + + `int policy' + The scheduling policy of the thread, *Note Scheduling + Policy::. + + `integer_t data' + Policy-dependent scheduling information, *Note Scheduling + Policy::. + + `int base_priority' + The base scheduling priority of the thread. + + `int max_priority' + The maximum scheduling priority of the thread. + + `int cur_priority' + The current scheduling priority of the thread. + + `int depressed' + `TRUE' if the thread is depressed. + + `int depress_priority' + The priority the thread was depressed from. + + -- Data type: thread_sched_info_t + This is a pointer to a `struct thread_sched_info'. + + +File: mach.info, Node: Thread Settings, Next: Thread Execution, Prev: Thread Information, Up: Thread Interface + +7.1.4 Thread Settings +--------------------- + + -- Function: kern_return_t thread_wire (host_priv_t HOST_PRIV, + thread_t THREAD, boolean_t WIRED) + The function `thread_wire' controls the VM privilege level of the + thread THREAD. A VM-privileged thread never waits inside the + kernel for memory allocation from the kernel's free list of pages + or for allocation of a kernel stack. + + Threads that are part of the default pageout path should be + VM-privileged, to prevent system deadlocks. Threads that are not + part of the default pageout path should not be VM-privileged, to + prevent the kernel's free list of pages from being exhausted. + + The functions returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_ARGUMENT' if HOST_PRIV or THREAD was invalid. + + The `thread_wire' call is actually an RPC to HOST_PRIV, normally a + send right for a privileged host port, but potentially any send + right. In addition to the normal diagnostic return codes from the + call's server (normally the kernel), the call may return `mach_msg' + return codes. + + +File: mach.info, Node: Thread Execution, Next: Scheduling, Prev: Thread Settings, Up: Thread Interface + +7.1.5 Thread Execution +---------------------- + + -- Function: kern_return_t thread_suspend (thread_t TARGET_THREAD) + Increments the thread's suspend count and prevents the thread from + executing any more user level instructions. In this context a user + level instruction is either a machine instruction executed in user + mode or a system trap instruction including page faults. Thus if + a thread is currently executing within a system trap the kernel + code may continue to execute until it reaches the system return + code or it may supend within the kernel code. In either case, + when the thread is resumed the system trap will return. This + could cause unpredictible results if the user did a suspend and + then altered the user state of the thread in order to change its + direction upon a resume. The call `thread_abort' is provided to + allow the user to abort any system call that is in progress in a + predictable way. + + The suspend count may become greater than one with the effect that + it will take more than one resume call to restart the thread. + + The function returns `KERN_SUCCESS' if the thread has been + suspended and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a + thread. + + -- Function: kern_return_t thread_resume (thread_t TARGET_THREAD) + Decrements the threads's suspend count. If the count becomes zero + the thread is resumed. If it is still positive, the thread is left + suspended. The suspend count may not become negative. + + The function returns `KERN_SUCCESS' if the thread has been resumed, + `KERN_FAILURE' if the suspend count is already zero and + `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread. + + -- Function: kern_return_t thread_abort (thread_t TARGET_THREAD) + The function `thread_abort' aborts the kernel primitives: + `mach_msg', `msg_send', `msg_receive' and `msg_rpc' and + page-faults, making the call return a code indicating that it was + interrupted. The call is interrupted whether or not the thread + (or task containing it) is currently suspended. If it is + supsended, the thread receives the interupt when it is resumed. + + A thread will retry an aborted page-fault if its state is not + modified before it is resumed. `msg_send' returns + `SEND_INTERRUPTED'; `msg_receive' returns `RCV_INTERRUPTED'; + `msg_rpc' returns either `SEND_INTERRUPTED' or `RCV_INTERRUPTED', + depending on which half of the RPC was interrupted. + + The main reason for this primitive is to allow one thread to + cleanly stop another thread in a manner that will allow the future + execution of the target thread to be controlled in a predictable + way. `thread_suspend' keeps the target thread from executing any + further instructions at the user level, including the return from + a system call. `thread_get_state'/`thread_set_state' allows the + examination or modification of the user state of a target thread. + However, if a suspended thread was executing within a system call, + it also has associated with it a kernel state. This kernel state + can not be modified by `thread_set_state' with the result that + when the thread is resumed the system call may return changing the + user state and possibly user memory. `thread_abort' aborts the + kernel call from the target thread's point of view by resetting + the kernel state so that the thread will resume execution at the + system call return with the return code value set to one of the + interrupted codes. The system call itself will either be entirely + completed or entirely aborted, depending on the precise moment at + which the abort was received. Thus if the thread's user state has + been changed by `thread_set_state', it will not be modified by any + unexpected system call side effects. + + For example to simulate a Unix signal, the following sequence of + calls may be used: + + 1. `thread_suspend': Stops the thread. + + 2. `thread_abort': Interrupts any system call in progress, + setting the return value to `interrupted'. Since the thread + is stopped, it will not return to user code. + + 3. `thread_set_state': Alters thread's state to simulate a + procedure call to the signal handler + + 4. `thread_resume': Resumes execution at the signal handler. If + the thread's stack has been correctly set up, the thread may + return to the interrupted system call. (Of course, the code + to push an extra stack frame and change the registers is VERY + machine-dependent.) + + Calling `thread_abort' on a non-suspended thread is pretty risky, + since it is very difficult to know exactly what system trap, if + any, the thread might be executing and whether an interrupt return + would cause the thread to do something useful. + + The function returns `KERN_SUCCESS' if the thread received an + interrupt and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a + thread. + + -- Function: kern_return_t thread_get_state (thread_t TARGET_THREAD, + int FLAVOR, thread_state_t OLD_STATE, + mach_msg_type_number_t *OLD_STATECNT) + The function `thread_get_state' returns the execution state (e.g. + the machine registers) of TARGET_THREAD as specified by FLAVOR. + The OLD_STATE is an array of integers that is provided by the + caller and returned filled with the specified information. + OLD_STATECNT is input set to the maximum number of integers in + OLD_STATE and returned equal to the actual number of integers in + OLD_STATE. + + TARGET_THREAD may not be `mach_thread_self()'. + + The definition of the state structures can be found in + `machine/thread_status.h'. + + The function returns `KERN_SUCCESS' if the state has been returned, + `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or is + `mach_thread_self' or FLAVOR is unrecogized for this machine. The + function returns `MIG_ARRAY_TOO_LARGE' if the returned state is + too large for OLD_STATE. In this case, OLD_STATE is filled as + much as possible and OLD_STATECNT is set to the number of elements + that would have been returned if there were enough room. + + -- Function: kern_return_t thread_set_state (thread_t TARGET_THREAD, + int FLAVOR, thread_state_t NEW_STATE, + mach_msg_type_number_t NEW_STATE_COUNT) + The function `thread_set_state' sets the execution state (e.g. the + machine registers) of TARGET_THREAD as specified by FLAVOR. The + NEW_STATE is an array of integers. NEW_STATE_COUNT is the number + of elements in NEW_STATE. The entire set of registers is reset. + This will do unpredictable things if TARGET_THREAD is not + suspended. + + TARGET_THREAD may not be `mach_thread_self'. + + The definition of the state structures can be found in + `machine/thread_status.h'. + + The function returns `KERN_SUCCESS' if the state has been set and + `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or is + `mach_thread_self' or FLAVOR is unrecogized for this machine. + + +File: mach.info, Node: Scheduling, Next: Thread Special Ports, Prev: Thread Execution, Up: Thread Interface + +7.1.6 Scheduling +---------------- + +* Menu: + +* Thread Priority:: Changing the priority of a thread. +* Hand-Off Scheduling:: Switching to a new thread. +* Scheduling Policy:: Setting the scheduling policy. + + +File: mach.info, Node: Thread Priority, Next: Hand-Off Scheduling, Up: Scheduling + +7.1.6.1 Thread Priority +....................... + +Threads have three priorities associated with them by the system, a +priority, a maximum priority, and a scheduled priority. The scheduled +priority is used to make scheduling decisions about the thread. It is +determined from the priority by the policy (for timesharing, this means +adding an increment derived from cpu usage). The priority can be set +under user control, but may never exceed the maximum priority. Changing +the maximum priority requires presentation of the control port for the +thread's processor set; since the control port for the default processor +set is privileged, users cannot raise their maximum priority to unfairly +compete with other users on that set. Newly created threads obtain +their priority from their task and their max priority from the thread. + + -- Function: kern_return_t thread_priority (thread_t THREAD, + int PRORITY, boolean_t SET_MAX) + The function `thread_priority' changes the priority and optionally + the maximum priority of THREAD. Priorities range from 0 to 31, + where lower numbers denote higher priorities. If the new priority + is higher than the priority of the current thread, preemption may + occur as a result of this call. The maximum priority of the + thread is also set if SET_MAX is `TRUE'. This call will fail if + PRIORITY is greater than the current maximum priority of the + thread. As a result, this call can only lower the value of a + thread's maximum priority. + + The functions returns `KERN_SUCCESS' if the operation completed + successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a thread or + PRIORITY is out of range (not in 0..31), and `KERN_FAILURE' if the + requested operation would violate the thread's maximum priority + (thread_priority). + + -- Function: kern_return_t thread_max_priority (thread_t THREAD, + processor_set_t PROCESSOR_SET, int PRIORITY) + The function `thread_max_priority' changes the maximum priority of + the thread. Because it requires presentation of the corresponding + processor set port, this call can reset the maximum priority to any + legal value. + + The functions returns `KERN_SUCCESS' if the operation completed + successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a thread or + PROCESSOR_SET is not a control port for a processor set or + PRIORITY is out of range (not in 0..31), and `KERN_FAILURE' if the + thread is not assigned to the processor set whose control port was + presented. + + +File: mach.info, Node: Hand-Off Scheduling, Next: Scheduling Policy, Prev: Thread Priority, Up: Scheduling + +7.1.6.2 Hand-Off Scheduling +........................... + + -- Function: kern_return_t thread_switch (thread_t NEW_THREAD, + int OPTION, int TIME) + The function `thread_switch' provides low-level access to the + scheduler's context switching code. NEW_THREAD is a hint that + implements hand-off scheduling. The operating system will attempt + to switch directly to the new thread (by passing the normal logic + that selects the next thread to run) if possible. Since this is a + hint, it may be incorrect; it is ignored if it doesn't specify a + thread on the same host as the current thread or if that thread + can't be switched to (i.e., not runnable or already running on + another processor). In this case, the normal logic to select the + next thread to run is used; the current thread may continue + running if there is no other appropriate thread to run. + + Options for OPTION are defined in `mach/thread_switch.h' and + specify the interpretation of TIME. The possible values for + OPTION are: + + `SWITCH_OPTION_NONE' + No options, the time argument is ignored. + + `SWITCH_OPTION_WAIT' + The thread is blocked for the specified time. This can be + aborted by `thread_abort'. + + `SWITCH_OPTION_DEPRESS' + The thread's priority is depressed to the lowest possible + value for the specified time. This can be aborted by + `thread_depress_abort'. This depression is independent of + operations that change the thread's priority (e.g. + `thread_priority' will not abort the depression). The + minimum time and units of time can be obtained as the + `min_timeout' value from `host_info'. The depression is also + aborted when the current thread is next run (either via + handoff scheduling or because the processor set has nothing + better to do). + + `thread_switch' is often called when the current thread can proceed + no further for some reason; the various options and arguments allow + information about this reason to be transmitted to the kernel. The + NEW_THREAD argument (handoff scheduling) is useful when the + identity of the thread that must make progress before the current + thread runs again is known. The `WAIT' option is used when the + amount of time that the current thread must wait before it can do + anything useful can be estimated and is fairly long. The + `DEPRESS' option is used when the amount of time that must be + waited is fairly short, especially when the identity of the thread + that is being waited for is not known. + + Users should beware of calling `thread_switch' with an invalid hint + (e.g. `MACH_PORT_NULL') and no option. Because the time-sharing + scheduler varies the priority of threads based on usage, this may + result in a waste of cpu time if the thread that must be run is of + lower priority. The use of the `DEPRESS' option in this situation + is highly recommended. + + `thread_switch' ignores policies. Users relying on the preemption + semantics of a fixed time policy should be aware that + `thread_switch' ignores these semantics; it will run the specified + NEW_THREAD indepent of its priority and the priority of any other + threads that could be run instead. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_ARGUMENT' if THREAD is not a thread or OPTION is not + a recognized option, and `KERN_FAILURE' if `kern_depress_abort' + failed because the thread was not depressed. + + -- Function: kern_return_t thread_depress_abort (thread_t THREAD) + The function `thread_depress_abort' cancels any priority depression + for THREAD caused by a `swtch_pri' or `thread_switch' call. + + The function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if THREAD is not a valid thread. + + -- Function: boolean_t swtch () + The system trap `swtch' attempts to switch the current thread off + the processor. The return value indicates if more than the current + thread is running in the processor set. This is useful for lock + management routines. + + The call returns `FALSE' if the thread is justified in becoming a + resource hog by continuing to spin because there's nothing else + useful that the processor could do. `TRUE' is returned if the + thread should make one more check on the lock and then be a good + citizen and really suspend. + + -- Function: boolean_t swtch_pri (int PRIORITY) + The system trap `swtch_pri' attempts to switch the current thread + off the processor as `swtch' does, but depressing the priority of + the thread to the minimum possible value during the time. + PRIORITY is not used currently. + + The return value is as for `swtch'. + + +File: mach.info, Node: Scheduling Policy, Prev: Hand-Off Scheduling, Up: Scheduling + +7.1.6.3 Scheduling Policy +......................... + + -- Function: kern_return_t thread_policy (thread_t THREAD, int POLICY, + int DATA) + The function `thread_policy' changes the scheduling policy for + THREAD to POLICY. + + DATA is policy-dependent scheduling information. There are + currently two supported policies: `POLICY_TIMESHARE' and + `POLICY_FIXEDPRI' defined in `mach/policy.h'; this file is + included by `mach.h'. DATA is meaningless for timesharing, but is + the quantum to be used (in milliseconds) for the fixed priority + policy. To be meaningful, this quantum must be a multiple of the + basic system quantum (min_quantum) which can be obtained from + `host_info'. The system will always round up to the next multiple + of the quantum. + + Processor sets may restrict the allowed policies, so this call + will fail if the processor set to which THREAD is currently + assigned does not permit POLICY. + + The function returns `KERN_SUCCESS' if the call succeeded. + `KERN_INVALID_ARGUMENT' if THREAD is not a thread or POLICY is not + a recognized policy, and `KERN_FAILURE' if the processor set to + which THREAD is currently assigned does not permit POLICY. + + +File: mach.info, Node: Thread Special Ports, Next: Exceptions, Prev: Scheduling, Up: Thread Interface + +7.1.7 Thread Special Ports +-------------------------- + + -- Function: kern_return_t thread_get_special_port (thread_t THREAD, + int WHICH_PORT, mach_port_t *SPECIAL_PORT) + The function `thread_get_special_port' returns send rights to one + of a set of special ports for the thread specified by THREAD. + + The possible values for WHICH_PORT are `THREAD_KERNEL_PORT' and + `THREAD_EXCEPTION_PORT'. A thread also has access to its task's + special ports. + + The function returns `KERN_SUCCESS' if the port was returned and + `KERN_INVALID_ARGUMENT' if THREAD is not a thread or WHICH_PORT is + an invalid port selector. + + -- Function: kern_return_t thread_get_kernel_port (thread_t THREAD, + mach_port_t *KERNEL_PORT) + The function `thread_get_kernel_port' is equivalent to the function + `thread_get_special_port' with the WHICH_PORT argument set to + `THREAD_KERNEL_PORT'. + + -- Function: kern_return_t thread_get_exception_port (thread_t THREAD, + mach_port_t *EXCEPTION_PORT) + The function `thread_get_exception_port' is equivalent to the + function `thread_get_special_port' with the WHICH_PORT argument + set to `THREAD_EXCEPTION_PORT'. + + -- Function: kern_return_t thread_set_special_port (thread_t THREAD, + int WHICH_PORT, mach_port_t SPECIAL_PORT) + The function `thread_set_special_port' sets one of a set of special + ports for the thread specified by THREAD. + + The possible values for WHICH_PORT are `THREAD_KERNEL_PORT' and + `THREAD_EXCEPTION_PORT'. A thread also has access to its task's + special ports. + + The function returns `KERN_SUCCESS' if the port was set and + `KERN_INVALID_ARGUMENT' if THREAD is not a thread or WHICH_PORT is + an invalid port selector. + + -- Function: kern_return_t thread_set_kernel_port (thread_t THREAD, + mach_port_t KERNEL_PORT) + The function `thread_set_kernel_port' is equivalent to the function + `thread_set_special_port' with the WHICH_PORT argument set to + `THREAD_KERNEL_PORT'. + + -- Function: kern_return_t thread_set_exception_port (thread_t THREAD, + mach_port_t EXCEPTION_PORT) + The function `thread_set_exception_port' is equivalent to the + function `thread_set_special_port' with the WHICH_PORT argument + set to `THREAD_EXCEPTION_PORT'. + + +File: mach.info, Node: Exceptions, Prev: Thread Special Ports, Up: Thread Interface + +7.1.8 Exceptions +---------------- + + -- Function: kern_return_t catch_exception_raise + (mach_port_t EXCEPTION_PORT, thread_t THREAD, task_t TASK, + int EXCEPTION, int CODE, int SUBCODE) + XXX Fixme + + -- Function: kern_return_t exception_raise + (mach_port_t EXCEPTION_PORT, mach_port_t THREAD, + mach_port_t TASK, integer_t EXCEPTION, integer_t CODE, + integer_t SUBCODE) + XXX Fixme + + -- Function: kern_return_t evc_wait (unsigned int EVENT) + The system trap `evc_wait' makes the calling thread wait for the + event specified by EVENT. + + The call returns `KERN_SUCCESS' if the event has occured, + `KERN_NO_SPACE' if another thread is waiting for the same event and + `KERN_INVALID_ARGUMENT' if the event object is invalid. + + +File: mach.info, Node: Task Interface, Next: Profiling, Prev: Thread Interface, Up: Threads and Tasks + +7.2 Task Interface +================== + + -- Data type: task_t + This is a `mach_port_t' and used to hold the port name of a task + port that represents the thread. Manipulations of the task are + implemented as remote procedure calls to the task port. A task + can get a port to itself with the `mach_task_self' system call. + + The task port name is also used to identify the task's IPC space + (*note Port Manipulation Interface::) and the task's virtual + memory map (*note Virtual Memory Interface::). + +* Menu: + +* Task Creation:: Creating tasks. +* Task Termination:: Terminating tasks. +* Task Information:: Informations on tasks. +* Task Execution:: Thread scheduling in a task. +* Task Special Ports:: How to get and set the task's special ports. +* Syscall Emulation:: How to emulate system calls. + + +File: mach.info, Node: Task Creation, Next: Task Termination, Up: Task Interface + +7.2.1 Task Creation +------------------- + + -- Function: kern_return_t task_create (task_t PARENT_TASK, + boolean_t INHERIT_MEMORY, task_t *CHILD_TASK) + The function `task_create' creates a new task from PARENT_TASK; + the resulting task (CHILD_TASK) acquires shared or copied parts of + the parent's address space (see `vm_inherit'). The child task + initially contains no threads. + + If INHERIT_MEMORY is set, the child task's address space is built + from the parent task according to its memory inheritance values; + otherwise, the child task is given an empty address space. + + The child task gets the three special ports created or copied for + it at task creation. The `TASK_KERNEL_PORT' is created and send + rights for it are given to the child and returned to the caller. + The `TASK_BOOTSTRAP_PORT' and the `TASK_EXCEPTION_PORT' are + inherited from the parent task. The new task can get send rights + to these ports with the call `task_get_special_port'. + + The function returns `KERN_SUCCESS' if a new task has been created, + `KERN_INVALID_ARGUMENT' if PARENT_TASK is not a valid task port + and `KERN_RESOURCE_SHORTAGE' if some critical kernel resource is + unavailable. + + +File: mach.info, Node: Task Termination, Next: Task Information, Prev: Task Creation, Up: Task Interface + +7.2.2 Task Termination +---------------------- + + -- Function: kern_return_t task_terminate (task_t TARGET_TASK) + The function `task_terminate' destroys the task specified by + TARGET_TASK and all its threads. All resources that are used only + by this task are freed. Any port to which this task has receive + and ownership rights is destroyed. + + The function returns `KERN_SUCCESS' if the task has been killed, + `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task. + + +File: mach.info, Node: Task Information, Next: Task Execution, Prev: Task Termination, Up: Task Interface + +7.2.3 Task Information +---------------------- + + -- Function: task_t mach_task_self () + The `mach_task_self' system call returns the calling thread's task + port. + + `mach_task_self' has an effect equivalent to receiving a send right + for the task port. `mach_task_self' returns the name of the send + right. In particular, successive calls will increase the calling + task's user-reference count for the send right. + + As a special exception, the kernel will overrun the user reference + count of the task name port, so that this function can not fail + for that reason. Because of this, the user should not deallocate + the port right if an overrun might have happened. Otherwise the + reference count could drop to zero and the send right be destroyed + while the user still expects to be able to use it. As the kernel + does not make use of the number of extant send rights anyway, this + is safe to do (the task port itself is not destroyed, even when + there are no send rights anymore). + + The funcion returns `MACH_PORT_NULL' if a resource shortage + prevented the reception of the send right, `MACH_PORT_NULL' if the + task port is currently null, `MACH_PORT_DEAD' if the task port is + currently dead. + + -- Function: kern_return_t task_threads (task_t TARGET_TASK, + thread_array_t *THREAD_LIST, + mach_msg_type_number_t *THREAD_COUNT) + The function `task_threads' gets send rights to the kernel port for + each thread contained in TARGET_TASK. THREAD_LIST is an array + that is created as a result of this call. The caller may wish to + `vm_deallocate' this array when the data is no longer needed. + + The function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task. + + -- Function: kern_return_t task_info (task_t TARGET_TASK, int FLAVOR, + task_info_t TASK_INFO, + mach_msg_type_number_t *TASK_INFO_COUNT) + The function `task_info' returns the selected information array for + a task, as specified by FLAVOR. TASK_INFO is an array of integers + that is supplied by the caller, and filled with specified + information. TASK_INFO_COUNT is supplied as the maximum number of + integers in TASK_INFO. On return, it contains the actual number + of integers in TASK_INFO. The maximum number of integers returned + by any flavor is `TASK_INFO_MAX'. + + The type of information returned is defined by FLAVOR, which can + be one of the following: + + `TASK_BASIC_INFO' + The function returns basic information about the task, as + defined by `task_basic_info_t'. This includes the user and + system time and memory consumption. The number of integers + returned is `TASK_BASIC_INFO_COUNT'. + + `TASK_EVENTS_INFO' + The function returns information about events for the task as + defined by `thread_sched_info_t'. This includes statistics + about virtual memory and IPC events like pageouts, pageins + and messages sent and received. The number of integers + returned is `TASK_EVENTS_INFO_COUNT'. + + `TASK_THREAD_TIMES_INFO' + The function returns information about the total time for + live threads as defined by `task_thread_times_info_t'. The + number of integers returned is `TASK_THREAD_TIMES_INFO_COUNT'. + + The function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a thread or FLAVOR + is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if + the returned info array is too large for TASK_INFO. In this case, + TASK_INFO is filled as much as possible and TASK_INFOCNT is set to + the number of elements that would have been returned if there were + enough room. + + -- Data type: struct task_basic_info + This structure is returned in TASK_INFO by the `task_info' + function and provides basic information about the task. You can + cast a variable of type `task_info_t' to a pointer of this type if + you provided it as the TASK_INFO parameter for the + `TASK_BASIC_INFO' flavor of `task_info'. It has the following + members: + + `integer_t suspend_count' + suspend count for task + + `integer_t base_priority' + base scheduling priority + + `vm_size_t virtual_size' + number of virtual pages + + `vm_size_t resident_size' + number of resident pages + + `time_value_t user_time' + total user run time for terminated threads + + `time_value_t system_time' + total system run time for terminated threads + + `time_value_t creation_time' + creation time stamp + + -- Data type: task_basic_info_t + This is a pointer to a `struct task_basic_info'. + + -- Data type: struct task_events_info + This structure is returned in TASK_INFO by the `task_info' + function and provides event statistics for the task. You can cast + a variable of type `task_info_t' to a pointer of this type if you + provided it as the TASK_INFO parameter for the `TASK_EVENTS_INFO' + flavor of `task_info'. It has the following members: + + `natural_t faults' + number of page faults + + `natural_t zero_fills' + number of zero fill pages + + `natural_t reactivations' + number of reactivated pages + + `natural_t pageins' + number of actual pageins + + `natural_t cow_faults' + number of copy-on-write faults + + `natural_t messages_sent' + number of messages sent + + `natural_t messages_received' + number of messages received + + -- Data type: task_events_info_t + This is a pointer to a `struct task_events_info'. + + -- Data type: struct task_thread_times_info + This structure is returned in TASK_INFO by the `task_info' + function and provides event statistics for the task. You can cast + a variable of type `task_info_t' to a pointer of this type if you + provided it as the TASK_INFO parameter for the + `TASK_THREAD_TIMES_INFO' flavor of `task_info'. It has the + following members: + + `time_value_t user_time' + total user run time for live threads + + `time_value_t system_time' + total system run time for live threads + + -- Data type: task_thread_times_info_t + This is a pointer to a `struct task_thread_times_info'. + + +File: mach.info, Node: Task Execution, Next: Task Special Ports, Prev: Task Information, Up: Task Interface + +7.2.4 Task Execution +-------------------- + + -- Function: kern_return_t task_suspend (task_t TARGET_TASK) + The function `task_suspend' increments the task's suspend count and + stops all threads in the task. As long as the suspend count is + positive newly created threads will not run. This call does not + return until all threads are suspended. + + The count may become greater than one, with the effect that it + will take more than one resume call to restart the task. + + The function returns `KERN_SUCCESS' if the task has been suspended + and `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task. + + -- Function: kern_return_t task_resume (task_t TARGET_TASK) + The function `task_resume' decrements the task's suspend count. If + it becomes zero, all threads with zero suspend counts in the task + are resumed. The count may not become negative. + + The function returns `KERN_SUCCESS' if the task has been resumed, + `KERN_FAILURE' if the suspend count is already at zero and + `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task. + + -- Function: kern_return_t task_priority (task_t TASK, int PRIORITY, + boolean_t CHANGE_THREADS) + The priority of a task is used only for creation of new threads; a + new thread's priority is set to the enclosing task's priority. + `task_priority' changes this task priority. It also sets the + priorities of all threads in the task to this new priority if + CHANGE_THREADS is `TRUE'. Existing threads are not affected + otherwise. If this priority change violates the maximum priority + of some threads, as many threads as possible will be changed and + an error code will be returned. + + The function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_ARGUMENT' if TASK is not a task, or PRIORITY is not + a valid priority and `KERN_FAILURE' if CHANGE_THREADS was `TRUE' + and the attempt to change the priority of at least one existing + thread failed because the new priority would have exceeded that + thread's maximum priority. + + -- Function: kern_return_t task_ras_control (task_t TARGET_TASK, + vm_address_t START_PC, vm_address_t END_PC, int FLAVOR) + The function `task_ras_control' manipulates a task's set of + restartable atomic sequences. If a sequence is installed, and any + thread in the task is preempted within the range + [START_PC,END_PC], then the thread is resumed at START_PC. This + enables applications to build atomic sequences which, when + executed to completion, will have executed atomically. + Restartable atomic sequences are intended to be used on systems + that do not have hardware support for low-overhead atomic + primitives. + + As a thread can be rolled-back, the code in the sequence should + have no side effects other than a final store at END_PC. The + kernel does not guarantee that the sequence is restartable. It + assumes the application knows what it's doing. + + A task may have a finite number of atomic sequences that is + defined at compile time. + + The flavor specifices the particular operation that should be + applied to this restartable atomic sequence. Possible values for + flavor can be: + + `TASK_RAS_CONTROL_PURGE_ALL' + Remove all registered sequences for this task. + + `TASK_RAS_CONTROL_PURGE_ONE' + Remove the named registered sequence for this task. + + `TASK_RAS_CONTROL_PURGE_ALL_AND_INSTALL_ONE' + Atomically remove all registered sequences and install the + named sequence. + + `TASK_RAS_CONTROL_INSTALL_ONE' + Install this sequence. + + The function returns `KERN_SUCCESS' if the operation has been + performed, `KERN_INVALID_ADDRESS' if the START_PC or END_PC values + are not a valid address for the requested operation (for example, + it is invalid to purge a sequence that has not been registered), + `KERN_RESOURCE_SHORTAGE' if an attempt was made to install more + restartable atomic sequences for a task than can be supported by + the kernel, `KERN_INVALID_VALUE' if a bad flavor was specified, + `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task and + `KERN_FAILURE' if the call is not not supported on this + configuration. + + +File: mach.info, Node: Task Special Ports, Next: Syscall Emulation, Prev: Task Execution, Up: Task Interface + +7.2.5 Task Special Ports +------------------------ + + -- Function: kern_return_t task_get_special_port (task_t TASK, + int WHICH_PORT, mach_port_t *SPECIAL_PORT) + The function `task_get_special_port' returns send rights to one of + a set of special ports for the task specified by TASK. + + The special ports associated with a task are the kernel port + (`TASK_KERNEL_PORT'), the bootstrap port (`TASK_BOOTSTRAP_PORT') + and the exception port (`TASK_EXCEPTION_PORT'). The bootstrap + port is a port to which a task may send a message requesting other + system service ports. This port is not used by the kernel. The + task's exception port is the port to which messages are sent by + the kernel when an exception occurs and the thread causing the + exception has no exception port of its own. + + The following macros to call `task_get_special_port' for a specific + port are defined in `mach/task_special_ports.h': + `task_get_exception_port' and `task_get_bootstrap_port'. + + The function returns `KERN_SUCCESS' if the port was returned and + `KERN_INVALID_ARGUMENT' if TASK is not a task or WHICH_PORT is an + invalid port selector. + + -- Function: kern_return_t task_get_kernel_port (task_t TASK, + mach_port_t *KERNEL_PORT) + The function `task_get_kernel_port' is equivalent to the function + `task_get_special_port' with the WHICH_PORT argument set to + `TASK_KERNEL_PORT'. + + -- Function: kern_return_t task_get_exception_port (task_t TASK, + mach_port_t *EXCEPTION_PORT) + The function `task_get_exception_port' is equivalent to the + function `task_get_special_port' with the WHICH_PORT argument set + to `TASK_EXCEPTION_PORT'. + + -- Function: kern_return_t task_get_bootstrap_port (task_t TASK, + mach_port_t *BOOTSTRAP_PORT) + The function `task_get_bootstrap_port' is equivalent to the + function `task_get_special_port' with the WHICH_PORT argument set + to `TASK_BOOTSTRAP_PORT'. + + -- Function: kern_return_t task_set_special_port (task_t TASK, + int WHICH_PORT, mach_port_t SPECIAL_PORT) + The function `thread_set_special_port' sets one of a set of special + ports for the task specified by TASK. + + The special ports associated with a task are the kernel port + (`TASK_KERNEL_PORT'), the bootstrap port (`TASK_BOOTSTRAP_PORT') + and the exception port (`TASK_EXCEPTION_PORT'). The bootstrap + port is a port to which a thread may send a message requesting + other system service ports. This port is not used by the kernel. + The task's exception port is the port to which messages are sent + by the kernel when an exception occurs and the thread causing the + exception has no exception port of its own. + + The function returns `KERN_SUCCESS' if the port was set and + `KERN_INVALID_ARGUMENT' if TASK is not a task or WHICH_PORT is an + invalid port selector. + + -- Function: kern_return_t task_set_kernel_port (task_t TASK, + mach_port_t KERNEL_PORT) + The function `task_set_kernel_port' is equivalent to the function + `task_set_special_port' with the WHICH_PORT argument set to + `TASK_KERNEL_PORT'. + + -- Function: kern_return_t task_set_exception_port (task_t TASK, + mach_port_t EXCEPTION_PORT) + The function `task_set_exception_port' is equivalent to the + function `task_set_special_port' with the WHICH_PORT argument set + to `TASK_EXCEPTION_PORT'. + + -- Function: kern_return_t task_set_bootstrap_port (task_t TASK, + mach_port_t BOOTSTRAP_PORT) + The function `task_set_bootstrap_port' is equivalent to the + function `task_set_special_port' with the WHICH_PORT argument set + to `TASK_BOOTSTRAP_PORT'. + + +File: mach.info, Node: Syscall Emulation, Prev: Task Special Ports, Up: Task Interface + +7.2.6 Syscall Emulation +----------------------- + + -- Function: kern_return_t task_get_emulation_vector (task_t TASK, + int *VECTOR_START, emulation_vector_t *EMULATION_VECTOR, + mach_msg_type_number_t *EMULATION_VECTOR_COUNT) + The function `task_get_emulation_vector' gets the user-level + handler entry points for all emulated system calls. + + -- Function: kern_return_t task_set_emulation_vector (task_t TASK, + int VECTOR_START, emulation_vector_t EMULATION_VECTOR, + mach_msg_type_number_t EMULATION_VECTOR_COUNT) + The function `task_set_emulation_vector' establishes user-level + handlers for the specified system calls. Non-emulated system + calls are specified with an entry of `EML_ROUTINE_NULL'. System + call emulation handlers are inherited by the childs of TASK. + + -- Function: kern_return_t task_set_emulation (task_t TASK, + vm_address_t ROUTINE_ENTRY_PT, int ROUTINE_NUMBER) + The function `task_set_emulation' establishes a user-level handler + for the specified system call. System call emulation handlers are + inherited by the childs of TASK. + + +File: mach.info, Node: Profiling, Prev: Task Interface, Up: Threads and Tasks + +7.3 Profiling +============= + + -- Function: kern_return_t task_enable_pc_sampling (task_t TASK, + int *TICKS, sampled_pc_flavor_t FLAVOR) + -- Function: kern_return_t thread_enable_pc_sampling (thread_t THREAD, + int *TICKS, sampled_pc_flavor_t FLAVOR) + The function `task_enable_pc_sampling' enables PC sampling for + TASK, the function `thread_enable_pc_sampling' enables PC sampling + for THREAD. The kernel's idea of clock granularity is returned in + TICKS in usecs. (this value should not be trusted). The sampling + flavor is specified by FLAVOR. + + The function returns `KERN_SUCCESS' if the operation is completed + successfully and `KERN_INVALID_ARGUMENT' if THREAD is not a valid + thread. + + -- Function: kern_return_t task_disable_pc_sampling (task_t TASK, + int *SAMPLE_COUNT) + -- Function: kern_return_t thread_disable_pc_sampling + (thread_t THREAD, int *SAMPLE_COUNT) + The function `task_disable_pc_sampling' disables PC sampling for + TASK, the function `thread_disable_pc_sampling' disables PC + sampling for THREAD. The number of sample elements in the kernel + for the thread is returned in SAMPLE_COUNT. + + The function returns `KERN_SUCCESS' if the operation is completed + successfully and `KERN_INVALID_ARGUMENT' if THREAD is not a valid + thread. + + -- Function: kern_return_t task_get_sampled_pcs (task_t TASK, + sampled_pc_seqno_t *SEQNO, sampled_pc_array_t SAMPLED_PCS, + mach_msg_type_number_t *SAMPLE_COUNT) + -- Function: kern_return_t thread_get_sampled_pcs (thread_t THREAD, + sampled_pc_seqno_t *SEQNO, sampled_pc_array_t SAMPLED_PCS, + int *SAMPLE_COUNT) + The function `task_get_sampled_pcs' extracts the PC samples for + TASK, the function `thread_get_sampled_pcs' extracts the PC + samples for THREAD. SEQNO is the sequence number of the sampled + PCs. This is useful for determining when a collector thread has + missed a sample. The sampled PCs for the thread are returned in + SAMPLED_PCS. SAMPLE_COUNT contains the number of sample elements + returned. + + The function returns `KERN_SUCCESS' if the operation is completed + successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a valid + thread and `KERN_FAILURE' if THREAD is not sampled. + + -- Data type: sampled_pc_t + This structure is returned in SAMPLED_PCS by the + `thread_get_sampled_pcs' and `task_get_sampled_pcs' functions and + provides pc samples for threads or tasks. It has the following + members: + + `natural_t id' + A thread-specific unique identifier. + + `vm_offset_t pc' + A pc value. + + `sampled_pc_flavor_t sampletype' + The type of the sample as per flavor. + + -- Data type: sampled_pc_flavor_t + This data type specifies a pc sample flavor, either as argument + passed in FLAVOR to the `thread_enable_pc_sample' and + `thread_disable_pc_sample' functions, or as member `sampletype' in + the `sample_pc_t' data type. The flavor is a bitwise-or of the + possible flavors defined in `mach/pc_sample.h': + + `SAMPLED_PC_PERIODIC' + default + + `SAMPLED_PC_VM_ZFILL_FAULTS' + zero filled fault + + `SAMPLED_PC_VM_REACTIVATION_FAULTS' + reactivation fault + + `SAMPLED_PC_VM_PAGEIN_FAULTS' + pagein fault + + `SAMPLED_PC_VM_COW_FAULTS' + copy-on-write fault + + `SAMPLED_PC_VM_FAULTS_ANY' + any fault + + `SAMPLED_PC_VM_FAULTS' + the bitwise-or of `SAMPLED_PC_VM_ZFILL_FAULTS', + `SAMPLED_PC_VM_REACTIVATION_FAULTS', + `SAMPLED_PC_VM_PAGEIN_FAULTS' and `SAMPLED_PC_VM_COW_FAULTS'. + + +File: mach.info, Node: Host Interface, Next: Processors and Processor Sets, Prev: Threads and Tasks, Up: Top + +8 Host Interface +**************** + +This section describes the Mach interface to a host executing a Mach +kernel. The interface allows to query statistics about a host and +control its behaviour. + + A host is represented by two ports, a name port HOST used to query +information about the host accessible to everyone, and a control port +HOST_PRIV used to manipulate it. For example, you can query the +current time using the name port, but to change the time you need to +send a message to the host control port. + + Everything described in this section is declared in the header file +`mach.h'. + +* Menu: + +* Host Ports:: Ports representing a host. +* Host Information:: Retrieval of information about a host. +* Host Time:: Operations on the time as seen by a host. +* Host Reboot:: Rebooting the system. + + +File: mach.info, Node: Host Ports, Next: Host Information, Up: Host Interface + +8.1 Host Ports +============== + + -- Data type: host_t + This is a `mach_port_t' and used to hold the port name of a host + name port (or short: host port). Any task can get a send right to + the name port of the host running the task using the + `mach_host_self' system call. The name port can be used query + information about the host, for example the current time. + + -- Function: host_t mach_host_self () + The `mach_host_self' system call returns the calling thread's host + name port. It has an effect equivalent to receiving a send right + for the host port. `mach_host_self' returns the name of the send + right. In particular, successive calls will increase the calling + task's user-reference count for the send right. + + As a special exception, the kernel will overrun the user reference + count of the host name port, so that this function can not fail + for that reason. Because of this, the user should not deallocate + the port right if an overrun might have happened. Otherwise the + reference count could drop to zero and the send right be destroyed + while the user still expects to be able to use it. As the kernel + does not make use of the number of extant send rights anyway, this + is safe to do (the host port itself is never destroyed). + + The function returns `MACH_PORT_NULL' if a resource shortage + prevented the reception of the send right. + + This function is also available in `mach/mach_traps.h'. + + -- Data type: host_priv_t + This is a `mach_port_t' and used to hold the port name of a + privileged host control port. A send right to the host control + port is inserted into the first task at bootstrap (*note + Modules::). This is the only way to get access to the host + control port in Mach, so the initial task has to preserve the send + right carefully, moving a copy of it to other privileged tasks if + necessary and denying access to unprivileged tasks. + + +File: mach.info, Node: Host Information, Next: Host Time, Prev: Host Ports, Up: Host Interface + +8.2 Host Information +==================== + + -- Function: kern_return_t host_info (host_t HOST, int FLAVOR, + host_info_t HOST_INFO, + mach_msg_type_number_t *HOST_INFO_COUNT) + The `host_info' function returns various information about HOST. + HOST_INFO is an array of integers that is supplied by the caller. + It will be filled with the requested information. HOST_INFO_COUNT + is supplied as the maximum number of integers in HOST_INFO. On + return, it contains the actual number of integers in HOST_INFO. + The maximum number of integers returned by any flavor is + `HOST_INFO_MAX'. + + The type of information returned is defined by FLAVOR, which can + be one of the following: + + `HOST_BASIC_INFO' + The function returns basic information about the host, as + defined by `host_basic_info_t'. This includes the number of + processors, their type, and the amount of memory installed in + the system. The number of integers returned is + `HOST_BASIC_INFO_COUNT'. For how to get more information + about the processor, see *Note Processor Interface::. + + `HOST_PROCESSOR_SLOTS' + The function returns the numbers of the slots with active + processors in them. The number of integers returned can be + up to `max_cpus', as returned by the `HOST_BASIC_INFO' flavor + of `host_info'. + + `HOST_SCHED_INFO' + The function returns information of interest to schedulers as + defined by `host_sched_info_t'. The number of integers + returned is `HOST_SCHED_INFO_COUNT'. + + The function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if HOST is not a host or FLAVOR is not + recognized. The function returns `MIG_ARRAY_TOO_LARGE' if the + returned info array is too large for HOST_INFO. In this case, + HOST_INFO is filled as much as possible and HOST_INFO_COUNT is set + to the number of elements that would be returned if there were + enough room. + + -- Data type: struct host_basic_info + A pointer to this structure is returned in HOST_INFO by the + `host_info' function and provides basic information about the host. + You can cast a variable of type `host_info_t' to a pointer of this + type if you provided it as the HOST_INFO parameter for the + `HOST_BASIC_INFO' flavor of `host_info'. It has the following + members: + + `int max_cpus' + The maximum number of possible processors for which the + kernel is configured. + + `int avail_cpus' + The number of cpus currently available. + + `vm_size_t memory_size' + The size of physical memory in bytes. + + `cpu_type_t cpu_type' + The type of the master processor. + + `cpu_subtype_t cpu_subtype' + The subtype of the master processor. + + The type and subtype of the individual processors are also + available by `processor_info', see *Note Processor Interface::. + + -- Data type: host_basic_info_t + This is a pointer to a `struct host_basic_info'. + + -- Data type: struct host_sched_info + A pointer to this structure is returned in HOST_INFO by the + `host_info' function and provides information of interest to + schedulers. You can cast a variable of type `host_info_t' to a + pointer of this type if you provided it as the HOST_INFO parameter + for the `HOST_SCHED_INFO' flavor of `host_info'. It has the + following members: + + `int min_timeout' + The minimum timeout and unit of time in milliseconds. + + `int min_quantum' + The minimum quantum and unit of quantum in milliseconds. + + -- Data type: host_sched_info_t + This is a pointer to a `struct host_sched_info'. + + -- Function: kern_return_t host_kernel_version (host_t HOST, + kernel_version_t *VERSION) + The `host_kernel_version' function returns the version string + compiled into the kernel executing on HOST at the time it was + built in the character string VERSION. This string describes the + version of the kernel. The constant `KERNEL_VERSION_MAX' should be + used to dimension storage for the returned string if the + `kernel_version_t' declaration is not used. + + If the version string compiled into the kernel is longer than + `KERNEL_VERSION_MAX', the result is truncated and not necessarily + null-terminated. + + If HOST is not a valid send right to a host port, the function + returns `KERN_INVALID_ARGUMENT'. If VERSION points to + inaccessible memory, it returns `KERN_INVALID_ADDRESS', and + `KERN_SUCCESS' otherwise. + + -- Function: kern_return_t host_get_boot_info (host_priv_t HOST_PRIV, + kernel_boot_info_t BOOT_INFO) + The `host_get_boot_info' function returns the boot-time information + string supplied by the operator to the kernel executing on + HOST_PRIV in the character string BOOT_INFO. The constant + `KERNEL_BOOT_INFO_MAX' should be used to dimension storage for the + returned string if the `kernel_boot_info_t' declaration is not + used. + + If the boot-time information string supplied by the operator is + longer than `KERNEL_BOOT_INFO_MAX', the result is truncated and not + necessarily null-terminated. + + +File: mach.info, Node: Host Time, Next: Host Reboot, Prev: Host Information, Up: Host Interface + +8.3 Host Time +============= + + -- Data type: time_value_t + This is the representation of a time in Mach. It is a `struct + time_value' and consists of the following members: + + `integer_t seconds' + The number of seconds. + + `integer_t microseconds' + The number of microseconds. + +The number of microseconds should always be smaller than +`TIME_MICROS_MAX' (100000). A time with this property is "normalized". +Normalized time values can be manipulated with the following macros: + + -- Macro: time_value_add_usec (time_value_t *VAL, integer_t *MICROS) + Add MICROS microseconds to VAL. If VAL is normalized and MICROS + smaller than `TIME_MICROS_MAX', VAL will be normalized afterwards. + + -- Macro: time_value_add (time_value_t *RESULT, time_value_t *ADDEND) + Add the values in ADDEND to RESULT. If both are normalized, + RESULT will be normalized afterwards. + + A variable of type `time_value_t' can either represent a duration or +a fixed point in time. In the latter case, it shall be interpreted as +the number of seconds and microseconds after the epoch 1. Jan 1970. + + -- Function: kern_return_t host_get_time (host_t HOST, + time_value_t *CURRENT_TIME) + Get the current time as seen by HOST. On success, the time passed + since the epoch is returned in CURRENT_TIME. + + -- Function: kern_return_t host_set_time (host_priv_t HOST_PRIV, + time_value_t NEW_TIME) + Set the time of HOST_PRIV to NEW_TIME. + + -- Function: kern_return_t host_adjust_time (host_priv_t HOST_PRIV, + time_value_t NEW_ADJUSTMENT, time_value_t *OLD_ADJUSTMENT) + Arrange for the current time as seen by HOST_PRIV to be gradually + changed by the adjustment value NEW_ADJUSTMENT, and return the old + adjustment value in OLD_ADJUSTMENT. + + For efficiency, the current time is available through a mapped-time +interface. + + -- Data type: mapped_time_value_t + This structure defines the mapped-time interface. It has the + following members: + + `integer_t seconds' + The number of seconds. + + `integer_t microseconds' + The number of microseconds. + + `integer_t check_seconds' + This is a copy of the seconds value, which must be checked to + protect against a race condition when reading out the two + time values. + + Here is an example how to read out the current time using the +mapped-time interface: + + do + { + secs = mtime->seconds; + usecs = mtime->microseconds; + } + while (secs != mtime->check_seconds); + + +File: mach.info, Node: Host Reboot, Prev: Host Time, Up: Host Interface + +8.4 Host Reboot +=============== + + -- Function: kern_return_t host_reboot (host_priv_t HOST_PRIV, + int OPTIONS) + Reboot the host specified by HOST_PRIV. The argument OPTIONS + specifies the flags. The available flags are defined in + `sys/reboot.h': + + `RB_HALT' + Do not reboot, but halt the machine. + + `RB_DEBUGGER' + Do not reboot, but enter kernel debugger from user space. + + If successful, the function might not return. + + +File: mach.info, Node: Processors and Processor Sets, Next: Device Interface, Prev: Host Interface, Up: Top + +9 Processors and Processor Sets +******************************* + +This section describes the Mach interface to processor sets and +individual processors. The interface allows to group processors into +sets and control the processors and processor sets. + + A processor is not a central part of the interface. It is mostly of +relevance as a part of a processor set. Threads are always assigned to +processor sets, and all processors in a set are equally involved in +executing all threads assigned to that set. + + The processor set is represented by two ports, a name port +PROCESSOR_SET_NAME used to query information about the host accessible +to everyone, and a control port PROCESSOR_SET used to manipulate it. + +* Menu: + +* Processor Set Interface:: How to work with processor sets. +* Processor Interface:: How to work with individual processors. + + +File: mach.info, Node: Processor Set Interface, Next: Processor Interface, Up: Processors and Processor Sets + +9.1 Processor Set Interface +=========================== + +* Menu: + +* Processor Set Ports:: Ports representing a processor set. +* Processor Set Access:: How the processor sets are accessed. +* Processor Set Creation:: How new processor sets are created. +* Processor Set Destruction:: How processor sets are destroyed. +* Tasks and Threads on Sets:: Assigning tasks, threads to processor sets. +* Processor Set Priority:: Specifying the priority of a processor set. +* Processor Set Policy:: Changing the processor set policies. +* Processor Set Info:: Obtaining information about a processor set. + + +File: mach.info, Node: Processor Set Ports, Next: Processor Set Access, Up: Processor Set Interface + +9.1.1 Processor Set Ports +------------------------- + + -- Data type: processor_set_name_t + This is a `mach_port_t' and used to hold the port name of a + processor set name port that names the processor set. Any task + can get a send right to name port of a processor set. The + processor set name port allows to get information about the + processor set. + + -- Data type: processor_set_t + This is a `mach_port_t' and used to hold the port name of a + privileged processor set control port that represents the + processor set. Operations on the processor set are implemented as + remote procedure calls to the processor set port. The processor + set port allows to manipulate the processor set. + + +File: mach.info, Node: Processor Set Access, Next: Processor Set Creation, Prev: Processor Set Ports, Up: Processor Set Interface + +9.1.2 Processor Set Access +-------------------------- + + -- Function: kern_return_t host_processor_sets (host_t HOST, + processor_set_name_array_t *PROCESSOR_SETS, + mach_msg_type_number_t *PROCESSOR_SETS_COUNT) + The function `host_processor_sets' gets send rights to the name + port for each processor set currently assigned to HOST. + + `host_processor_set_priv' can be used to obtain the control ports + from these if desired. PROCESSOR_SETS is an array that is created + as a result of this call. The caller may wish to `vm_deallocate' + this array when the data is no longer needed. + PROCESSOR_SETS_COUNT is set to the number of processor sets in the + PROCESSOR_SETS. + + This function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if HOST is not a host. + + -- Function: kern_return_t host_processor_set_priv + (host_priv_t HOST_PRIV, processor_set_name_t SET_NAME, + processor_set_t *SET) + The function `host_processor_set_priv' allows a privileged + application to obtain the control port SET for an existing + processor set from its name port SET_NAME. The privileged host + port HOST_PRIV is required. + + This function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if HOST_PRIV is not a valid host control + port. + + -- Function: kern_return_t processor_set_default (host_t HOST, + processor_set_name_t *DEFAULT_SET) + The function `processor_set_default' returns the default processor + set of HOST in DEFAULT_SET. The default processor set is used by + all threads, tasks, and processors that are not explicitly + assigned to other sets. processor_set_default returns a port that + can be used to obtain information about this set (e.g. how many + threads are assigned to it). This port cannot be used to perform + operations on that set. + + This function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_ARGUMENT' if HOST is not a host and + `KERN_INVALID_ADDRESS' if DEFAULT_SET points to inaccessible + memory. + + +File: mach.info, Node: Processor Set Creation, Next: Processor Set Destruction, Prev: Processor Set Access, Up: Processor Set Interface + +9.1.3 Processor Set Creation +---------------------------- + + -- Function: kern_return_t processor_set_create (host_t HOST, + processor_set_t *NEW_SET, processor_set_name_t *NEW_NAME) + The function `processor_set_create' creates a new processor set on + HOST and returns the two ports associated with it. The port + returned in NEW_SET is the actual port representing the set. It + is used to perform operations such as assigning processors, tasks, + or threads. The port returned in NEW_NAME identifies the set, and + is used to obtain information about the set. + + This function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_ARGUMENT' if HOST is not a host, + `KERN_INVALID_ADDRESS' if NEW_SET or NEW_NAME points to + inaccessible memory and `KERN_FAILURE' is the operating system does + not support processor allocation. + + +File: mach.info, Node: Processor Set Destruction, Next: Tasks and Threads on Sets, Prev: Processor Set Creation, Up: Processor Set Interface + +9.1.4 Processor Set Destruction +------------------------------- + + -- Function: kern_return_t processor_set_destroy + (processor_set_t PROCESSOR_SET) + The function `processor_set_destroy' destroys the specified + processor set. Any assigned processors, tasks, or threads are + reassigned to the default set. The object port for the processor + set is required (not the name port). The default processor set + cannot be destroyed. + + This function returns `KERN_SUCCESS' if the set was destroyed, + `KERN_FAILURE' if an attempt was made to destroy the default + processor set, or the operating system does not support processor + allocation, and `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a + valid processor set control port. + + +File: mach.info, Node: Tasks and Threads on Sets, Next: Processor Set Priority, Prev: Processor Set Destruction, Up: Processor Set Interface + +9.1.5 Tasks and Threads on Sets +------------------------------- + + -- Function: kern_return_t processor_set_tasks + (processor_set_t PROCESSOR_SET, task_array_t *TASK_LIST, + mach_msg_type_number_t *TASK_COUNT) + The function `processor_set_tasks' gets send rights to the kernel + port for each task currently assigned to PROCESSOR_SET. + + TASK_LIST is an array that is created as a result of this call. + The caller may wish to `vm_deallocate' this array when the data is + no longer needed. TASK_COUNT is set to the number of tasks in the + TASK_LIST. + + This function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set. + + -- Function: kern_return_t processor_set_threads + (processor_set_t PROCESSOR_SET, thread_array_t *THREAD_LIST, + mach_msg_type_number_t *THREAD_COUNT) + The function `processor_set_thread' gets send rights to the kernel + port for each thread currently assigned to PROCESSOR_SET. + + THREAD_LIST is an array that is created as a result of this call. + The caller may wish to `vm_deallocate' this array when the data is + no longer needed. THREAD_COUNT is set to the number of threads in + the THREAD_LIST. + + This function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set. + + -- Function: kern_return_t task_assign (task_t TASK, + processor_set_t PROCESSOR_SET, boolean_t ASSIGN_THREADS) + The function `task_assign' assigns TASK the set PROCESSOR_SET. + This assignment is for the purposes of determining the initial + assignment of newly created threads in task. Any previous + assignment of the task is nullified. Existing threads within the + task are also reassigned if ASSIGN_THREADS is `TRUE'. They are + not affected if it is `FALSE'. + + This function returns `KERN_SUCCESS' if the assignment has been + performed and `KERN_INVALID_ARGUMENT' if TASK is not a task, or + PROCESSOR_SET is not a processor set on the same host as TASK. + + -- Function: kern_return_t task_assign_default (task_t TASK, + boolean_t ASSIGN_THREADS) + The function `task_assign_default' is a variant of `task_assign' + that assigns the task to the default processor set on that task's + host. This variant exists because the control port for the + default processor set is privileged and not ususally available to + users. + + This function returns `KERN_SUCCESS' if the assignment has been + performed and `KERN_INVALID_ARGUMENT' if TASK is not a task. + + -- Function: kern_return_t task_get_assignment (task_t TASK, + processor_set_name_t *ASSIGNED_SET) + The function `task_get_assignment' returns the name of the + processor set to which the thread is currently assigned in + ASSIGNED_SET. This port can only be used to obtain information + about the processor set. + + This function returns `KERN_SUCCESS' if the assignment has been + performed, `KERN_INVALID_ADDRESS' if PROCESSOR_SET points to + inaccessible memory, and `KERN_INVALID_ARGUMENT' if TASK is not a + task. + + -- Function: kern_return_t thread_assign (thread_t THREAD, + processor_set_t PROCESSOR_SET) + The function `thread_assign' assigns THREAD the set PROCESSOR_SET. + After the assignment is completed, the thread only executes on + processors assigned to the designated processor set. If there are + no such processors, then the thread is unable to execute. Any + previous assignment of the thread is nullified. Unix system call + compatibility code may temporarily force threads to execute on the + master processor. + + This function returns `KERN_SUCCESS' if the assignment has been + performed and `KERN_INVALID_ARGUMENT' if THREAD is not a thread, + or PROCESSOR_SET is not a processor set on the same host as THREAD. + + -- Function: kern_return_t thread_assign_default (thread_t THREAD) + The function `thread_assign_default' is a variant of + `thread_assign' that assigns the thread to the default processor + set on that thread's host. This variant exists because the + control port for the default processor set is privileged and not + ususally available to users. + + This function returns `KERN_SUCCESS' if the assignment has been + performed and `KERN_INVALID_ARGUMENT' if THREAD is not a thread. + + -- Function: kern_return_t thread_get_assignment (thread_t THREAD, + processor_set_name_t *ASSIGNED_SET) + The function `thread_get_assignment' returns the name of the + processor set to which the thread is currently assigned in + ASSIGNED_SET. This port can only be used to obtain information + about the processor set. + + This function returns `KERN_SUCCESS' if the assignment has been + performed, `KERN_INVALID_ADDRESS' if PROCESSOR_SET points to + inaccessible memory, and `KERN_INVALID_ARGUMENT' if THREAD is not + a thread. + + +File: mach.info, Node: Processor Set Priority, Next: Processor Set Policy, Prev: Tasks and Threads on Sets, Up: Processor Set Interface + +9.1.6 Processor Set Priority +---------------------------- + + -- Function: kern_return_t processor_set_max_priority + (processor_set_t PROCESSOR_SET, int MAX_PRIORITY, + boolean_t CHANGE_THREADS) + The function `processor_set_max_priority' is used to set the + maximum priority for a processor set. The priority of a processor + set is used only for newly created threads (thread's maximum + priority is set to processor set's) and the assignment of threads + to the set (thread's maximum priority is reduced if it exceeds the + set's maximum priority, thread's priority is similarly reduced). + `processor_set_max_priority' changes this priority. It also sets + the maximum priority of all threads assigned to the processor set + to this new priority if CHANGE_THREADS is `TRUE'. If this maximum + priority is less than the priorities of any of these threads, + their priorities will also be set to this new value. + + This function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set or + PRIORITY is not a valid priority. + + +File: mach.info, Node: Processor Set Policy, Next: Processor Set Info, Prev: Processor Set Priority, Up: Processor Set Interface + +9.1.7 Processor Set Policy +-------------------------- + + -- Function: kern_return_t processor_set_policy_enable + (processor_set_t PROCESSOR_SET, int POLICY) + -- Function: kern_return_t processor_set_policy_disable + (processor_set_t PROCESSOR_SET, int POLICY, + boolean_t CHANGE_THREADS) + Processor sets may restrict the scheduling policies to be used for + threads assigned to them. These two calls provide the mechanism + for designating permitted and forbidden policies. The current set + of permitted policies can be obtained from `processor_set_info'. + Timesharing may not be forbidden by any processor set. This is a + compromise to reduce the complexity of the assign operation; any + thread whose policy is forbidden by the target processor set has + its policy reset to timesharing. If the CHANGE_THREADS argument to + `processor_set_policy_disable' is true, threads currently assigned + to this processor set and using the newly disabled policy will have + their policy reset to timesharing. + + `mach/policy.h' contains the allowed policies; it is included by + `mach.h'. Not all policies (e.g. fixed priority) are supported by + all systems. + + This function returns `KERN_SUCCESS' if the operation was completed + successfully and `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a + processor set or POLICY is not a valid policy, or an attempt was + made to disable timesharing. + + +File: mach.info, Node: Processor Set Info, Prev: Processor Set Policy, Up: Processor Set Interface + +9.1.8 Processor Set Info +------------------------ + + -- Function: kern_return_t processor_set_info + (processor_set_name_t SET_NAME, int FLAVOR, host_t *HOST, + processor_set_info_t PROCESSOR_SET_INFO, + mach_msg_type_number_t *PROCESSOR_SET_INFO_COUNT) + The function `processor_set_info' returns the selected information + array for a processor set, as specified by FLAVOR. + + HOST is set to the host on which the processor set resides. This + is the non-privileged host port. + + PROCESSOR_SET_INFO is an array of integers that is supplied by the + caller and returned filled with specified information. + PROCESSOR_SET_INFO_COUNT is supplied as the maximum number of + integers in PROCESSOR_SET_INFO. On return, it contains the actual + number of integers in PROCESSOR_SET_INFO. The maximum number of + integers returned by any flavor is `PROCESSOR_SET_INFO_MAX'. + + The type of information returned is defined by FLAVOR, which can + be one of the following: + + `PROCESSOR_SET_BASIC_INFO' + The function returns basic information about the processor + set, as defined by `processor_set_basic_info_t'. This + includes the number of tasks and threads assigned to the + processor set. The number of integers returned is + `PROCESSOR_SET_BASIC_INFO_COUNT'. + + `PROCESSOR_SET_SCHED_INFO' + The function returns information about the schduling policy + for the processor set as defined by + `processor_set_sched_info_t'. The number of integers + returned is `PROCESSOR_SET_SCHED_INFO_COUNT'. + + Some machines may define additional (machine-dependent) flavors. + + The function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set or + FLAVOR is not recognized. The function returns + `MIG_ARRAY_TOO_LARGE' if the returned info array is too large for + PROCESSOR_SET_INFO. In this case, PROCESSOR_SET_INFO is filled as + much as possible and PROCESSOR_SET_INFO_COUNT is set to the number + of elements that would have been returned if there were enough + room. + + -- Data type: struct processor_set_basic_info + This structure is returned in PROCESSOR_SET_INFO by the + `processor_set_info' function and provides basic information about + the processor set. You can cast a variable of type + `processor_set_info_t' to a pointer of this type if you provided it + as the PROCESSOR_SET_INFO parameter for the + `PROCESSOR_SET_BASIC_INFO' flavor of `processor_set_info'. It has + the following members: + + `int processor_count' + number of processors + + `int task_count' + number of tasks + + `int thread_count' + number of threads + + `int load_average' + scaled load average + + `int mach_factor' + scaled mach factor + + -- Data type: processor_set_basic_info_t + This is a pointer to a `struct processor_set_basic_info'. + + -- Data type: struct processor_set_sched_info + This structure is returned in PROCESSOR_SET_INFO by the + `processor_set_info' function and provides schedule information + about the processor set. You can cast a variable of type + `processor_set_info_t' to a pointer of this type if you provided it + as the PROCESSOR_SET_INFO parameter for the + `PROCESSOR_SET_SCHED_INFO' flavor of `processor_set_info'. It has + the following members: + + `int policies' + allowed policies + + `int max_priority' + max priority for new threads + + -- Data type: processor_set_sched_info_t + This is a pointer to a `struct processor_set_sched_info'. + + +File: mach.info, Node: Processor Interface, Prev: Processor Set Interface, Up: Processors and Processor Sets + +9.2 Processor Interface +======================= + + -- Data type: processor_t + This is a `mach_port_t' and used to hold the port name of a + processor port that represents the processor. Operations on the + processor are implemented as remote procedure calls to the + processor port. + +* Menu: + +* Hosted Processors:: Getting a list of all processors on a host. +* Processor Control:: Starting, stopping, controlling processors. +* Processors and Sets:: Combining processors into processor sets. +* Processor Info:: Obtaining information on processors. + + +File: mach.info, Node: Hosted Processors, Next: Processor Control, Up: Processor Interface + +9.2.1 Hosted Processors +----------------------- + + -- Function: kern_return_t host_processors (host_priv_t HOST_PRIV, + processor_array_t *PROCESSOR_LIST, + mach_msg_type_number_t *PROCESSOR_COUNT) + The function `host_processors' gets send rights to the processor + port for each processor existing on HOST_PRIV. This is the + privileged port that allows its holder to control a processor. + + PROCESSOR_LIST is an array that is created as a result of this + call. The caller may wish to `vm_deallocate' this array when the + data is no longer needed. PROCESSOR_COUNT is set to the number of + processors in the PROCESSOR_LIST. + + This function returns `KERN_SUCCESS' if the call succeeded, + `KERN_INVALID_ARGUMENT' if HOST_PRIV is not a privileged host + port, and `KERN_INVALID_ADDRESS' if PROCESSOR_COUNT points to + inaccessible memory. + + +File: mach.info, Node: Processor Control, Next: Processors and Sets, Prev: Hosted Processors, Up: Processor Interface + +9.2.2 Processor Control +----------------------- + + -- Function: kern_return_t processor_start (processor_t PROCESSOR) + -- Function: kern_return_t processor_exit (processor_t PROCESSOR) + -- Function: kern_return_t processor_control (processor_t PROCESSOR, + processor_info_t *CMD, mach_msg_type_number_t COUNT) + Some multiprocessors may allow privileged software to control + processors. The `processor_start', `processor_exit', and + `processor_control' operations implement this. The interpretation + of the command in CMD is machine dependent. A newly started + processor is assigned to the default processor set. An exited + processor is removed from the processor set to which it was + assigned and ceases to be active. + + COUNT contains the length of the command CMD as a number of ints. + + Availability limited. All of these operations are + machine-dependent. They may do nothing. The ability to restart + an exited processor is also machine-dependent. + + This function returns `KERN_SUCCESS' if the operation was + performed, `KERN_FAILURE' if the operation was not performed (a + likely reason is that it is not supported on this processor), + `KERN_INVALID_ARGUMENT' if PROCESSOR is not a processor, and + `KERN_INVALID_ADDRESS' if CMD points to inaccessible memory. + + +File: mach.info, Node: Processors and Sets, Next: Processor Info, Prev: Processor Control, Up: Processor Interface + +9.2.3 Processors and Sets +------------------------- + + -- Function: kern_return_t processor_assign (processor_t PROCESSOR, + processor_set_t PROCESSOR_SET, boolean_t WAIT) + The function `processor_assign' assigns PROCESSOR to the the set + PROCESSOR_SET. After the assignment is completed, the processor + only executes threads that are assigned to that processor set. + Any previous assignment of the processor is nullified. The master + processor cannot be reassigned. All processors take clock + interrupts at all times. The WAIT argument indicates whether the + caller should wait for the assignment to be completed or should + return immediately. Dedicated kernel threads are used to perform + processor assignment, so setting wait to `FALSE' allows assignment + requests to be queued and performed faster, especially if the + kernel has more than one dedicated internal thread for processor + assignment. Redirection of other device interrupts away from + processors assigned to other than the default processor set is + machine-dependent. Intermediaries that interpose on ports must be + sure to interpose on both ports involved in this call if they + interpose on either. + + This function returns `KERN_SUCCESS' if the assignment has been + performed, `KERN_INVALID_ARGUMENT' if PROCESSOR is not a + processor, or PROCESSOR_SET is not a processor set on the same + host as PROCESSOR. + + -- Function: kern_return_t processor_get_assignment + (processor_t PROCESSOR, processor_set_name_t *ASSIGNED_SET) + The function `processor_get_assignment' obtains the current + assignment of a processor. The name port of the processor set is + returned in ASSIGNED_SET. + + +File: mach.info, Node: Processor Info, Prev: Processors and Sets, Up: Processor Interface + +9.2.4 Processor Info +-------------------- + + -- Function: kern_return_t processor_info (processor_t PROCESSOR, + int FLAVOR, host_t *HOST, processor_info_t PROCESSOR_INFO, + mach_msg_type_number_t *PROCESSOR_INFO_COUNT) + The function `processor_info' returns the selected information + array for a processor, as specified by FLAVOR. + + HOST is set to the host on which the processor set resides. This + is the non-privileged host port. + + PROCESSOR_INFO is an array of integers that is supplied by the + caller and returned filled with specified information. + PROCESSOR_INFO_COUNT is supplied as the maximum number of integers + in PROCESSOR_INFO. On return, it contains the actual number of + integers in PROCESSOR_INFO. The maximum number of integers + returned by any flavor is `PROCESSOR_INFO_MAX'. + + The type of information returned is defined by FLAVOR, which can + be one of the following: + + `PROCESSOR_BASIC_INFO' + The function returns basic information about the processor, + as defined by `processor_basic_info_t'. This includes the + slot number of the processor. The number of integers + returned is `PROCESSOR_BASIC_INFO_COUNT'. + + Machines which require more configuration information beyond the + slot number are expected to define additional (machine-dependent) + flavors. + + The function returns `KERN_SUCCESS' if the call succeeded and + `KERN_INVALID_ARGUMENT' if PROCESSOR is not a processor or FLAVOR + is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if + the returned info array is too large for PROCESSOR_INFO. In this + case, PROCESSOR_INFO is filled as much as possible and + PROCESSOR_INFOCNT is set to the number of elements that would have + been returned if there were enough room. + + -- Data type: struct processor_basic_info + This structure is returned in PROCESSOR_INFO by the + `processor_info' function and provides basic information about the + processor. You can cast a variable of type `processor_info_t' to a + pointer of this type if you provided it as the PROCESSOR_INFO + parameter for the `PROCESSOR_BASIC_INFO' flavor of + `processor_info'. It has the following members: + + `cpu_type_t cpu_type' + cpu type + + `cpu_subtype_t cpu_subtype' + cpu subtype + + `boolean_t running' + is processor running? + + `int slot_num' + slot number + + `boolean_t is_master' + is this the master processor + + -- Data type: processor_basic_info_t + This is a pointer to a `struct processor_basic_info'. + + +File: mach.info, Node: Device Interface, Next: Kernel Debugger, Prev: Processors and Processor Sets, Up: Top + +10 Device Interface +******************* + +The GNU Mach microkernel provides a simple device interface that allows +the user space programs to access the underlying hardware devices. Each +device has a unique name, which is a string up to 127 characters long. +To open a device, the device master port has to be supplied. The device +master port is only available through the bootstrap port. Anyone who +has control over the device master port can use all hardware devices. + + -- Data type: device_t + This is a `mach_port_t' and used to hold the port name of a device + port that represents the device. Operations on the device are + implemented as remote procedure calls to the device port. Each + device provides a sequence of records. The length of a record is + specific to the device. Data can be transferred "out-of-line" or + "in-line" (*note Memory::). + + All constants and functions in this chapter are defined in +`device/device.h'. + +* Menu: + +* Device Reply Server:: Handling device reply messages. +* Device Open:: Opening hardware devices. +* Device Close:: Closing hardware devices. +* Device Read:: Reading data from the device. +* Device Write:: Writing data to the device. +* Device Map:: Mapping devices into virtual memory. +* Device Status:: Querying and manipulating a device. +* Device Filter:: Filtering packets arriving on a device. + + +File: mach.info, Node: Device Reply Server, Next: Device Open, Up: Device Interface + +10.1 Device Reply Server +======================== + +Beside the usual synchronous interface, an asynchronous interface is +provided. For this, the caller has to receive and handle the reply +messages seperately from the function call. + + -- Function: boolean_t device_reply_server (msg_header_t *IN_MSG, + msg_header_t *OUT_MSG) + The function `device_reply_server' is produced by the remote + procedure call generator to handle a received message. This + function does all necessary argument handling, and actually calls + one of the following functions: `ds_device_open_reply', + `ds_device_read_reply', `ds_device_read_reply_inband', + `ds_device_write_reply' and `ds_device_write_reply_inband'. + + The IN_MSG argument is the message that has been received from the + kernel. The OUT_MSG is a reply message, but this is not used for + this server. + + The function returns `TRUE' to indicate that the message in + question was applicable to this interface, and that the appropriate + routine was called to interpret the message. It returns `FALSE' to + indicate that the message did not apply to this interface, and + that no other action was taken. + + +File: mach.info, Node: Device Open, Next: Device Close, Prev: Device Reply Server, Up: Device Interface + +10.2 Device Open +================ + + -- Function: kern_return_t device_open (mach_port_t MASTER_PORT, + dev_mode_t MODE, dev_name_t NAME, device_t *DEVICE) + The function `device_open' opens the device NAME and returns a + port to it in DEVICE. The open count for the device is + incremented by one. If the open count was 0, the open handler for + the device is invoked. + + MASTER_PORT must hold the master device port. NAME specifies the + device to open, and is a string up to 128 characters long. MODE + is the open mode. It is a bitwise-or of the following constants: + + `D_READ' + Request read access for the device. + + `D_WRITE' + Request write access for the device. + + `D_NODELAY' + Do not delay an open. + + The function returns `D_SUCCESS' if the device was successfully + opened, `D_INVALID_OPERATION' if MASTER_PORT is not the master + device port, `D_WOULD_BLOCK' is the device is busy and `D_NOWAIT' + was specified in mode, `D_ALREADY_OPEN' if the device is already + open in an incompatible mode and `D_NO_SUCH_DEVICE' if NAME does + not denote a know device. + + -- Function: kern_return_t device_open_request + (mach_port_t MASTER_PORT, mach_port_t REPLY_PORT, + dev_mode_t MODE, dev_name_t NAME) + -- Function: kern_return_t ds_device_open_reply + (mach_port_t REPLY_PORT, kern_return_t RETURN, + device_t *DEVICE) + This is the asynchronous form of the `device_open' function. + `device_open_request' performs the open request. The meaning for + the parameters is as in `device_open'. Additionally, the caller + has to supply a reply port to which the `ds_device_open_reply' + message is sent by the kernel when the open has been performed. + The return value of the open operation is stored in RETURN_CODE. + + As neither function receives a reply message, only message + transmission errors apply. If no error occurs, `KERN_SUCCESS' is + returned. + + +File: mach.info, Node: Device Close, Next: Device Read, Prev: Device Open, Up: Device Interface + +10.3 Device Close +================= + + -- Function: kern_return_t device_close (device_t DEVICE) + The function `device_close' decrements the open count of the device + by one. If the open count drops to zero, the close handler for the + device is called. The device to close is specified by its port + DEVICE. + + The function returns `D_SUCCESS' if the device was successfully + closed and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device + port. + + +File: mach.info, Node: Device Read, Next: Device Write, Prev: Device Close, Up: Device Interface + +10.4 Device Read +================ + + -- Function: kern_return_t device_read (device_t DEVICE, + dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED, + io_buf_ptr_t *DATA, mach_msg_type_number_t *DATA_COUNT) + The function `device_read' reads BYTES_WANTED bytes from DEVICE, + and stores them in a buffer allocated with `vm_allocate', which + address is returned in DATA. The caller must deallocated it if it + is no longer needed. The number of bytes actually returned is + stored in DATA_COUNT. + + If MODE is `D_NOWAIT', the operation does not block. Otherwise + MODE should be 0. RECNUM is the record number to be read, its + meaning is device specific. + + The function returns `D_SUCCESS' if some data was successfully + read, `D_WOULD_BLOCK' if no data is currently available and + `D_NOWAIT' is specified, and `D_NO_SUCH_DEVICE' if DEVICE does not + denote a device port. + + -- Function: kern_return_t device_read_inband (device_t DEVICE, + dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED, + io_buf_ptr_inband_t *DATA, mach_msg_type_number_t *DATA_COUNT) + The `device_read_inband' function works as the `device_read' + function, except that the data is returned "in-line" in the reply + IPC message (*note Memory::). + + -- Function: kern_return_t device_read_request (device_t DEVICE, + mach_port_t REPLY_PORT, dev_mode_t MODE, recnum_t RECNUM, + int BYTES_WANTED) + -- Function: kern_return_t ds_device_read_reply + (mach_port_t REPLY_PORT, kern_return_t RETURN_CODE, + io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT) + This is the asynchronous form of the `device_read' function. + `device_read_request' performs the read request. The meaning for + the parameters is as in `device_read'. Additionally, the caller + has to supply a reply port to which the `ds_device_read_reply' + message is sent by the kernel when the read has been performed. + The return value of the read operation is stored in RETURN_CODE. + + As neither function receives a reply message, only message + transmission errors apply. If no error occurs, `KERN_SUCCESS' is + returned. + + -- Function: kern_return_t device_read_request_inband + (device_t DEVICE, mach_port_t REPLY_PORT, dev_mode_t MODE, + recnum_t RECNUM, int BYTES_WANTED) + -- Function: kern_return_t ds_device_read_reply_inband + (mach_port_t REPLY_PORT, kern_return_t RETURN_CODE, + io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT) + The `device_read_request_inband' and `ds_device_read_reply_inband' + functions work as the `device_read_request' and + `ds_device_read_reply' functions, except that the data is returned + "in-line" in the reply IPC message (*note Memory::). + + +File: mach.info, Node: Device Write, Next: Device Map, Prev: Device Read, Up: Device Interface + +10.5 Device Write +================= + + -- Function: kern_return_t device_write (device_t DEVICE, + dev_mode_t MODE, recnum_t RECNUM, io_buf_ptr_t DATA, + mach_msg_type_number_t DATA_COUNT, int *BYTES_WRITTEN) + The function `device_write' writes DATA_COUNT bytes from the + buffer DATA to DEVICE. The number of bytes actually written is + returned in BYTES_WRITTEN. + + If MODE is `D_NOWAIT', the function returns without waiting for + I/O completion. Otherwise MODE should be 0. RECNUM is the record + number to be written, its meaning is device specific. + + The function returns `D_SUCCESS' if some data was successfully + written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device + port or the device is dead or not completely open. + + -- Function: kern_return_t device_write_inband (device_t DEVICE, + dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED, + io_buf_ptr_inband_t *DATA, mach_msg_type_number_t *DATA_COUNT) + The `device_write_inband' function works as the `device_write' + function, except that the data is sent "in-line" in the request IPC + message (*note Memory::). + + -- Function: kern_return_t device_write_request (device_t DEVICE, + mach_port_t REPLY_PORT, dev_mode_t MODE, recnum_t RECNUM, + io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT) + -- Function: kern_return_t ds_device_write_reply + (mach_port_t REPLY_PORT, kern_return_t RETURN_CODE, + int BYTES_WRITTEN) + This is the asynchronous form of the `device_write' function. + `device_write_request' performs the write request. The meaning for + the parameters is as in `device_write'. Additionally, the caller + has to supply a reply port to which the `ds_device_write_reply' + message is sent by the kernel when the write has been performed. + The return value of the write operation is stored in RETURN_CODE. + + As neither function receives a reply message, only message + transmission errors apply. If no error occurs, `KERN_SUCCESS' is + returned. + + -- Function: kern_return_t device_write_request_inband + (device_t DEVICE, mach_port_t REPLY_PORT, dev_mode_t MODE, + recnum_t RECNUM, io_buf_ptr_t DATA, + mach_msg_type_number_t DATA_COUNT) + -- Function: kern_return_t ds_device_write_reply_inband + (mach_port_t REPLY_PORT, kern_return_t RETURN_CODE, + int BYTES_WRITTEN) + The `device_write_request_inband' and + `ds_device_write_reply_inband' functions work as the + `device_write_request' and `ds_device_write_reply' functions, + except that the data is sent "in-line" in the request IPC message + (*note Memory::). + + +File: mach.info, Node: Device Map, Next: Device Status, Prev: Device Write, Up: Device Interface + +10.6 Device Map +=============== + + -- Function: kern_return_t device_map (device_t DEVICE, + vm_prot_t PROT, vm_offset_t OFFSET, vm_size_t SIZE, + mach_port_t *PAGER, int UNMAP) + The function `device_map' creates a new memory manager for DEVICE + and returns a port to it in PAGER. The memory manager is usable + as a memory object in a `vm_map' call. The call is device + dependant. + + The protection for the memory object is specified by PROT. The + memory object starts at OFFSET within the device and extends SIZE + bytes. UNMAP is currently unused. + + The function returns `D_SUCCESS' if some data was successfully + written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device + port or the device is dead or not completely open. + + +File: mach.info, Node: Device Status, Next: Device Filter, Prev: Device Map, Up: Device Interface + +10.7 Device Status +================== + + -- Function: kern_return_t device_set_status (device_t DEVICE, + dev_flavor_t FLAVOR, dev_status_t STATUS, + mach_msg_type_number_t STATUS_COUNT) + The function `device_set_status' sets the status of a device. The + possible values for FLAVOR and their interpretation is device + specific. + + The function returns `D_SUCCESS' if some data was successfully + written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device + port or the device is dead or not completely open. + + -- Function: kern_return_t device_get_status (device_t DEVICE, + dev_flavor_t FLAVOR, dev_status_t STATUS, + mach_msg_type_number_t *STATUS_COUNT) + The function `device_get_status' gets the status of a device. The + possible values for FLAVOR and their interpretation is device + specific. + + The function returns `D_SUCCESS' if some data was successfully + written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device + port or the device is dead or not completely open. + + +File: mach.info, Node: Device Filter, Prev: Device Status, Up: Device Interface + +10.8 Device Filter +================== + + -- Function: kern_return_t device_set_filter (device_t DEVICE, + mach_port_t RECEIVE_PORT, + mach_msg_type_name_t RECEIVE_PORT_TYPE, int PRIORITY, + filter_array_t FILTER, mach_msg_type_number_t FILTER_COUNT) + The function `device_set_filter' makes it possible to filter out + selected data arriving at the device and forward it to a port. + FILTER is a list of filter commands, which are applied to incoming + data to determine if the data should be sent to RECEIVE_PORT. The + IPC type of the send right is specified by RECEIVE_PORT_RIGHT, it + is either `MACH_MSG_TYPE_MAKE_SEND' or `MACH_MSG_TYPE_MOVE_SEND'. + The PRIORITY value is used to order multiple filters. + + There can be up to `NET_MAX_FILTER' commands in FILTER. The + actual number of commands is passed in FILTER_COUNT. For the + purpose of the filter test, an internal stack is provided. After + all commands have been processed, the value on the top of the stack + determines if the data is forwarded or the next filter is tried. + + Each word of the command list specifies a data (push) operation + (high order NETF_NBPO bits) as well as a binary operator (low + order NETF_NBPA bits). The value to be pushed onto the stack is + chosen as follows. + + `NETF_PUSHLIT' + Use the next short word of the filter as the value. + + `NETF_PUSHZERO' + Use 0 as the value. + + `NETF_PUSHWORD+N' + Use short word N of the "data" portion of the message as the + value. + + `NETF_PUSHHDR+N' + Use short word N of the "header" portion of the message as + the value. + + `NETF_PUSHIND+N' + Pops the top long word from the stack and then uses short + word N of the "data" portion of the message as the value. + + `NETF_PUSHHDRIND+N' + Pops the top long word from the stack and then uses short + word N of the "header" portion of the message as the value. + + `NETF_PUSHSTK+N' + Use long word N of the stack (where the top of stack is long + word 0) as the value. + + `NETF_NOPUSH' + Don't push a value. + + The unsigned value so chosen is promoted to a long word before + being pushed. Once a value is pushed (except for the case of + `NETF_NOPUSH'), the top two long words of the stack are popped and + a binary operator applied to them (with the old top of stack as the + second operand). The result of the operator is pushed on the + stack. These operators are: + + `NETF_NOP' + Don't pop off any values and do no operation. + + `NETF_EQ' + Perform an equal comparison. + + `NETF_LT' + Perform a less than comparison. + + `NETF_LE' + Perform a less than or equal comparison. + + `NETF_GT' + Perform a greater than comparison. + + `NETF_GE' + Perform a greater than or equal comparison. + + `NETF_AND' + Perform a bitise boolean AND operation. + + `NETF_OR' + Perform a bitise boolean inclusive OR operation. + + `NETF_XOR' + Perform a bitise boolean exclusive OR operation. + + `NETF_NEQ' + Perform a not equal comparison. + + `NETF_LSH' + Perform a left shift operation. + + `NETF_RSH' + Perform a right shift operation. + + `NETF_ADD' + Perform an addition. + + `NETF_SUB' + Perform a subtraction. + + `NETF_COR' + Perform an equal comparison. If the comparison is `TRUE', + terminate the filter list. Otherwise, pop the result of the + comparison off the stack. + + `NETF_CAND' + Perform an equal comparison. If the comparison is `FALSE', + terminate the filter list. Otherwise, pop the result of the + comparison off the stack. + + `NETF_CNOR' + Perform a not equal comparison. If the comparison is `FALSE', + terminate the filter list. Otherwise, pop the result of the + comparison off the stack. + + `NETF_CNAND' + Perform a not equal comparison. If the comparison is `TRUE', + terminate the filter list. Otherwise, pop the result of the + comparison off the stack. The scan of the filter list + terminates when the filter list is emptied, or a `NETF_C...' + operation terminates the list. At this time, if the final + value of the top of the stack is `TRUE', then the message is + accepted for the filter. + + The function returns `D_SUCCESS' if some data was successfully + written, `D_INVALID_OPERATION' if RECEIVE_PORT is not a valid send + right, and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device + port or the device is dead or not completely open. + + +File: mach.info, Node: Kernel Debugger, Next: Copying, Prev: Device Interface, Up: Top + +11 Kernel Debugger +****************** + +The GNU Mach kernel debugger `ddb' is a powerful built-in debugger with +a gdb like syntax. It is enabled at compile time using the +`--enable-kdb' option. Whenever you want to enter the debugger while +running the kernel, you can press the key combination <Ctrl-Alt-D>. + +* Menu: + +* Operation:: Basic architecture of the kernel debugger. +* Commands:: Available commands in the kernel debugger. +* Variables:: Access of variables from the kernel debugger. +* Expressions:: Usage of expressions in the kernel debugger. + + +File: mach.info, Node: Operation, Next: Commands, Up: Kernel Debugger + +11.1 Operation +============== + +The current location is called "dot". The dot is displayed with a +hexadecimal format at a prompt. Examine and write commands update dot +to the address of the last line examined or the last location modified, +and set "next" to the address of the next location to be examined or +changed. Other commands don't change dot, and set next to be the same +as dot. + + The general command syntax is: + + COMMAND[/MODIFIER] ADDRESS [,COUNT] + + `!!' repeats the previous command, and a blank line repeats from the +address next with count 1 and no modifiers. Specifying ADDRESS sets +dot to the address. Omitting ADDRESS uses dot. A missing COUNT is +taken to be 1 for printing commands or infinity for stack traces. + + Current `ddb' is enhanced to support multi-thread debugging. A +break point can be set only for a specific thread, and the address space +or registers of non current thread can be examined or modified if +supported by machine dependent routines. For example, + + break/t mach_msg_trap $task11.0 + + sets a break point at `mach_msg_trap' for the first thread of task +11 listed by a `show all threads' command. + + In the above example, `$task11.0' is translated to the corresponding +thread structure's address by variable translation mechanism described +later. If a default target thread is set in a variable `$thread', the +`$task11.0' can be omitted. In general, if `t' is specified in a +modifier of a command line, a specified thread or a default target +thread is used as a target thread instead of the current one. The `t' +modifier in a command line is not valid in evaluating expressions in a +command line. If you want to get a value indirectly from a specific +thread's address space or access to its registers within an expression, +you have to specify a default target thread in advance, and to use `:t' +modifier immediately after the indirect access or the register +reference like as follows: + + set $thread $task11.0 + print $eax:t *(0x100):tuh + + No sign extension and indirection `size(long, half word, byte)' can +be specified with `u', `l', `h' and `b' respectively for the indirect +access. + + Note: Support of non current space/register access and user space +break point depend on the machines. If not supported, attempts of such +operation may provide incorrect information or may cause strange +behavior. Even if supported, the user space access is limited to the +pages resident in the main memory at that time. If a target page is not +in the main memory, an error will be reported. + + `ddb' has a feature like a command `more' for the output. If an +output line exceeds the number set in the `$lines' variable, it +displays `--db_more--' and waits for a response. The valid responses +for it are: + +`<SPC>' + one more page + +`<RET>' + one more line + +`q' + abort the current command, and return to the command input mode + diff --git a/doc/mach.info-2 b/doc/mach.info-2 new file mode 100644 index 0000000..806539f --- /dev/null +++ b/doc/mach.info-2 @@ -0,0 +1,1663 @@ +This is ../doc/mach.info, produced by makeinfo version 4.8 from +../doc/mach.texi. + +INFO-DIR-SECTION Kernel +START-INFO-DIR-ENTRY +* GNUMach: (mach). Using and programming the GNU Mach microkernel. +END-INFO-DIR-ENTRY + + This file documents the GNU Mach microkernel. + + This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach +Reference Manual', for Version 1.3.99. + + Copyright (C) 2001 Free Software Foundation, Inc. + + Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.1 or +any later version published by the Free Software Foundation; with the +Invariant Sections being "Free Software Needs Free Documentation" and +"GNU Lesser General Public License", the Front-Cover texts being (a) +(see below), and with the Back-Cover Texts being (b) (see below). A +copy of the license is included in the section entitled "GNU Free +Documentation License". + + (a) The FSF's Front-Cover Text is: + + A GNU Manual + + (b) The FSF's Back-Cover Text is: + + You have freedom to copy and modify this GNU Manual, like GNU +software. Copies published by the Free Software Foundation raise +funds for GNU development. + + This work is based on manual pages under the following copyright and +license: + +Mach Operating System +Copyright (C) 1991,1990 Carnegie Mellon University +All Rights Reserved. + + Permission to use, copy, modify and distribute this software and its +documentation is hereby granted, provided that both the copyright +notice and this permission notice appear in all copies of the software, +derivative works or modified versions, and any portions thereof, and +that both notices appear in supporting documentation. + + CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" +CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY +DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. + + +File: mach.info, Node: Commands, Next: Variables, Prev: Operation, Up: Kernel Debugger + +11.2 Commands +============= + +`examine(x) [/MODIFIER] ADDR[,COUNT] [ THREAD ]' + Display the addressed locations according to the formats in the + modifier. Multiple modifier formats display multiple locations. + If no format is specified, the last formats specified for this + command is used. Address space other than that of the current + thread can be specified with `t' option in the modifier and THREAD + parameter. The format characters are + + `b' + look at by bytes(8 bits) + + `h' + look at by half words(16 bits) + + `l' + look at by long words(32 bits) + + `a' + print the location being displayed + + `,' + skip one unit producing no output + + `A' + print the location with a line number if possible + + `x' + display in unsigned hex + + `z' + display in signed hex + + `o' + display in unsigned octal + + `d' + display in signed decimal + + `u' + display in unsigned decimal + + `r' + display in current radix, signed + + `c' + display low 8 bits as a character. Non-printing characters + are displayed as an octal escape code (e.g. '\000'). + + `s' + display the null-terminated string at the location. + Non-printing characters are displayed as octal escapes. + + `m' + display in unsigned hex with character dump at the end of + each line. The location is also displayed in hex at the + beginning of each line. + + `i' + display as an instruction + + `I' + display as an instruction with possible alternate formats + depending on the machine: + + `vax' + don't assume that each external label is a procedure + entry mask + + `i386' + don't round to the next long word boundary + + `mips' + print register contents + +`xf' + Examine forward. It executes an examine command with the last + specified parameters to it except that the next address displayed + by it is used as the start address. + +`xb' + Examine backward. It executes an examine command with the last + specified parameters to it except that the last start address + subtracted by the size displayed by it is used as the start + address. + +`print[/axzodurc] ADDR1 [ ADDR2 ... ]' + Print ADDR's according to the modifier character. Valid formats + are: `a' `x' `z' `o' `d' `u' `r' `c'. If no modifier is + specified, the last one specified to it is used. ADDR can be a + string, and it is printed as it is. For example, + + print/x "eax = " $eax "\necx = " $ecx "\n" + + will print like + + eax = xxxxxx + ecx = yyyyyy + +`write[/bhlt] ADDR [ THREAD ] EXPR1 [ EXPR2 ... ]' + Write the expressions at succeeding locations. The write unit + size can be specified in the modifier with a letter b (byte), h + (half word) or l(long word) respectively. If omitted, long word + is assumed. Target address space can also be specified with `t' + option in the modifier and THREAD parameter. Warning: since there + is no delimiter between expressions, strange things may happen. + It's best to enclose each expression in parentheses. + +`set $VARIABLE [=] EXPR' + Set the named variable or register with the value of EXPR. Valid + variable names are described below. + +`break[/tuTU] ADDR[,COUNT] [ THREAD1 ... ]' + Set a break point at ADDR. If count is supplied, continues + (COUNT-1) times before stopping at the break point. If the break + point is set, a break point number is printed with `#'. This + number can be used in deleting the break point or adding + conditions to it. + + `t' + Set a break point only for a specific thread. The thread is + specified by THREAD parameter, or default one is used if the + parameter is omitted. + + `u' + Set a break point in user space address. It may be combined + with `t' or `T' option to specify the non-current target user + space. Without `u' option, the address is considered in the + kernel space, and wrong space address is rejected with an + error message. This option can be used only if it is + supported by machine dependent routines. + + `T' + Set a break point only for threads in a specific task. It is + like `t' option except that the break point is valid for all + threads which belong to the same task as the specified target + thread. + + `U' + Set a break point in shared user space address. It is like + `u' option, except that the break point is valid for all + threads which share the same address space even if `t' option + is specified. `t' option is used only to specify the target + shared space. Without `t' option, `u' and `U' have the same + meanings. `U' is useful for setting a user space break point + in non-current address space with `t' option such as in an + emulation library space. This option can be used only if it + is supported by machine dependent routines. + + Warning: if a user text is shadowed by a normal user space + debugger, user space break points may not work correctly. Setting + a break point at the low-level code paths may also cause strange + behavior. + +`delete[/tuTU] ADDR|#NUMBER [ THREAD1 ... ]' + Delete the break point. The target break point can be specified + by a break point number with `#', or by ADDR like specified in + `break' command. + +`cond #NUMBER [ CONDITION COMMANDS ]' + Set or delete a condition for the break point specified by the + NUMBER. If the CONDITION and COMMANDS are null, the condition is + deleted. Otherwise the condition is set for it. When the break + point is hit, the CONDITION is evaluated. The COMMANDS will be + executed if the condition is true and the break point count set by + a break point command becomes zero. COMMANDS is a list of + commands separated by semicolons. Each command in the list is + executed in that order, but if a `continue' command is executed, + the command execution stops there, and the stopped thread resumes + execution. If the command execution reaches the end of the list, + and it enters into a command input mode. For example, + + set $work0 0 + break/Tu xxx_start $task7.0 + cond #1 (1) set $work0 1; set $work1 0; cont + break/T vm_fault $task7.0 + cond #2 ($work0) set $work1 ($work1+1); cont + break/Tu xxx_end $task7.0 + cond #3 ($work0) print $work1 " faults\n"; set $work0 0 + cont + + will print page fault counts from `xxx_start' to `xxx_end' in + `task7'. + +`step[/p] [,COUNT]' + Single step COUNT times. If `p' option is specified, print each + instruction at each step. Otherwise, only print the last + instruction. + + Warning: depending on machine type, it may not be possible to + single-step through some low-level code paths or user space code. + On machines with software-emulated single-stepping (e.g., pmax), + stepping through code executed by interrupt handlers will probably + do the wrong thing. + +`continue[/c]' + Continue execution until a breakpoint or watchpoint. If `/c', + count instructions while executing. Some machines (e.g., pmax) + also count loads and stores. + + Warning: when counting, the debugger is really silently + single-stepping. This means that single-stepping on low-level + code may cause strange behavior. + +`until' + Stop at the next call or return instruction. + +`next[/p]' + Stop at the matching return instruction. If `p' option is + specified, print the call nesting depth and the cumulative + instruction count at each call or return. Otherwise, only print + when the matching return is hit. + +`match[/p]' + A synonym for `next'. + +`trace[/tu] [ FRAME_ADDR|THREAD ][,COUNT]' + Stack trace. `u' option traces user space; if omitted, only traces + kernel space. If `t' option is specified, it shows the stack trace + of the specified thread or a default target thread. Otherwise, it + shows the stack trace of the current thread from the frame address + specified by a parameter or from the current frame. COUNT is the + number of frames to be traced. If the COUNT is omitted, all + frames are printed. + + Warning: If the target thread's stack is not in the main memory at + that time, the stack trace will fail. User space stack trace is + valid only if the machine dependent code supports it. + +`search[/bhl] ADDR VALUE [MASK] [,COUNT]' + Search memory for a value. This command might fail in interesting + ways if it doesn't find the searched-for value. This is because + `ddb' doesn't always recover from touching bad memory. The + optional count argument limits the search. + +`macro NAME COMMANDS' + Define a debugger macro as NAME. COMMANDS is a list of commands + to be associated with the macro. In the expressions of the + command list, a variable `$argxx' can be used to get a parameter + passed to the macro. When a macro is called, each argument is + evaluated as an expression, and the value is assigned to each + parameter, `$arg1', `$arg2', ... respectively. 10 `$arg' + variables are reserved to each level of macros, and they can be + used as local variables. The nesting of macro can be allowed up + to 5 levels. For example, + + macro xinit set $work0 $arg1 + macro xlist examine/m $work0,4; set $work0 *($work0) + xinit *(xxx_list) + xlist + .... + + will print the contents of a list starting from `xxx_list' by each + `xlist' command. + +`dmacro NAME' + Delete the macro named NAME. + +`show all threads[/ul]' + Display all tasks and threads information. This version of `ddb' + prints more information than previous one. It shows UNIX process + information like `ps' for each task. The UNIX process information + may not be shown if it is not supported in the machine, or the + bottom of the stack of the target task is not in the main memory at + that time. It also shows task and thread identification numbers. + These numbers can be used to specify a task or a thread + symbolically in various commands. The numbers are valid only in + the same debugger session. If the execution is resumed again, the + numbers may change. The current thread can be distinguished from + others by a `#' after the thread id instead of `:'. Without `l' + option, it only shows thread id, thread structure address and the + status for each thread. The status consists of 5 letters, R(run), + W(wait), S(sus pended), O(swapped out) and N(interruptible), and + if corresponding status bit is off, `.' is printed instead. If + `l' option is specified, more detail information is printed for + each thread. + +`show task [ ADDR ]' + Display the information of a task specified by ADDR. If ADDR is + omitted, current task information is displayed. + +`show thread [ ADDR ]' + Display the information of a thread specified by ADDR. If ADDR is + omitted, current thread information is displayed. + +`show registers[/tu [ THREAD ]]' + Display the register set. Target thread can be specified with `t' + option and THREAD parameter. If `u' option is specified, it + displays user registers instead of kernel or currently saved one. + + Warning: The support of `t' and `u' option depends on the machine. + If not supported, incorrect information will be displayed. + +`show map ADDR' + Prints the `vm_map' at ADDR. + +`show object ADDR' + Prints the `vm_object' at ADDR. + +`show page ADDR' + Prints the `vm_page' structure at ADDR. + +`show port ADDR' + Prints the `ipc_port' structure at ADDR. + +`show ipc_port[/t [ THREAD ]]' + Prints all `ipc_port' structure's addresses the target thread has. + The target thread is a current thread or that specified by a + parameter. + +`show macro [ NAME ]' + Show the definitions of macros. If NAME is specified, only the + definition of it is displayed. Otherwise, definitions of all + macros are displayed. + +`show watches' + Displays all watchpoints. + +`watch[/T] ADDR,SIZE [ TASK ]' + Set a watchpoint for a region. Execution stops when an attempt to + modify the region occurs. The SIZE argument defaults to 4. + Without `T' option, ADDR is assumed to be a kernel address. If + you want to set a watch point in user space, specify `T' and TASK + parameter where the address belongs to. If the TASK parameter is + omitted, a task of the default target thread or a current task is + assumed. If you specify a wrong space address, the request is + rejected with an error message. + + Warning: Attempts to watch wired kernel memory may cause + unrecoverable error in some systems such as i386. Watchpoints on + user addresses work best. + + +File: mach.info, Node: Variables, Next: Expressions, Prev: Commands, Up: Kernel Debugger + +11.3 Variables +============== + +The debugger accesses registers and variables as $NAME. Register names +are as in the `show registers' command. Some variables are suffixed +with numbers, and may have some modifier following a colon immediately +after the variable name. For example, register variables can have `u' +and `t' modifier to indicate user register and that of a default target +thread instead of that of the current thread (e.g. `$eax:tu'). + + Built-in variables currently supported are: + +`taskXX[.YY]' + Task or thread structure address. XX and YY are task and thread + identification numbers printed by a `show all threads' command + respectively. This variable is read only. + +`thread' + The default target thread. The value is used when `t' option is + specified without explicit thread structure address parameter in + command lines or expression evaluation. + +`radix' + Input and output radix + +`maxoff' + Addresses are printed as SYMBOL+OFFSET unless offset is greater + than maxoff. + +`maxwidth' + The width of the displayed line. + +`lines' + The number of lines. It is used by `more' feature. + +`tabstops' + Tab stop width. + +`argXX' + Parameters passed to a macro. XX can be 1 to 10. + +`workXX' + Work variable. XX can be 0 to 31. + + +File: mach.info, Node: Expressions, Prev: Variables, Up: Kernel Debugger + +11.4 Expressions +================ + +Almost all expression operators in C are supported except `~', `^', and +unary `&'. Special rules in `ddb' are: + +`IDENTIFIER' + name of a symbol. It is translated to the address(or value) of it. + `.' and `:' can be used in the identifier. If supported by an + object format dependent routine, [FILE_NAME:]FUNC[:LINE_NUMBER] + [FILE_NAME:]VARIABLE, and FILE_NAME[:LINE_NUMBER] can be accepted + as a symbol. The symbol may be prefixed with + `SYMBOL_TABLE_NAME::' like `emulator::mach_msg_trap' to specify + other than kernel symbols. + +`NUMBER' + radix is determined by the first two letters: + `0x' + hex + + `0o' + octal + + `0t' + decimal + + otherwise, follow current radix. + +`.' + dot + +`+' + next + +`..' + address of the start of the last line examined. Unlike dot or + next, this is only changed by `examine' or `write' command. + +`´' + last address explicitly specified. + +`$VARIABLE' + register name or variable. It is translated to the value of it. + It may be followed by a `:' and modifiers as described above. + +`a' + multiple of right hand side. + +`*EXPR' + indirection. It may be followed by a `:' and modifiers as + described above. + + +File: mach.info, Node: Copying, Next: Documentation License, Prev: Kernel Debugger, Up: Top + +Appendix A GNU GENERAL PUBLIC LICENSE +************************************* + + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +A.0.1 Preamble +-------------- + +The licenses for most software are designed to take away your freedom +to share and change it. By contrast, the GNU General Public License is +intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it in +new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, +and (2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + 1. This License applies to any program or other work which contains a + notice placed by the copyright holder saying it may be distributed + under the terms of this General Public License. The "Program", + below, refers to any such program or work, and a "work based on + the Program" means either the Program or any derivative work under + copyright law: that is to say, a work containing the Program or a + portion of it, either verbatim or with modifications and/or + translated into another language. (Hereinafter, translation is + included without limitation in the term "modification".) Each + licensee is addressed as "you". + + Activities other than copying, distribution and modification are + not covered by this License; they are outside its scope. The act + of running the Program is not restricted, and the output from the + Program is covered only if its contents constitute a work based on + the Program (independent of having been made by running the + Program). Whether that is true depends on what the Program does. + + 2. You may copy and distribute verbatim copies of the Program's + source code as you receive it, in any medium, provided that you + conspicuously and appropriately publish on each copy an appropriate + copyright notice and disclaimer of warranty; keep intact all the + notices that refer to this License and to the absence of any + warranty; and give any other recipients of the Program a copy of + this License along with the Program. + + You may charge a fee for the physical act of transferring a copy, + and you may at your option offer warranty protection in exchange + for a fee. + + 3. You may modify your copy or copies of the Program or any portion + of it, thus forming a work based on the Program, and copy and + distribute such modifications or work under the terms of Section 1 + above, provided that you also meet all of these conditions: + + a. You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b. You must cause any work that you distribute or publish, that + in whole or in part contains or is derived from the Program + or any part thereof, to be licensed as a whole at no charge + to all third parties under the terms of this License. + + c. If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display + an announcement including an appropriate copyright notice and + a notice that there is no warranty (or else, saying that you + provide a warranty) and that users may redistribute the + program under these conditions, and telling the user how to + view a copy of this License. (Exception: if the Program + itself is interactive but does not normally print such an + announcement, your work based on the Program is not required + to print an announcement.) + + These requirements apply to the modified work as a whole. If + identifiable sections of that work are not derived from the + Program, and can be reasonably considered independent and separate + works in themselves, then this License, and its terms, do not + apply to those sections when you distribute them as separate + works. But when you distribute the same sections as part of a + whole which is a work based on the Program, the distribution of + the whole must be on the terms of this License, whose permissions + for other licensees extend to the entire whole, and thus to each + and every part regardless of who wrote it. + + Thus, it is not the intent of this section to claim rights or + contest your rights to work written entirely by you; rather, the + intent is to exercise the right to control the distribution of + derivative or collective works based on the Program. + + In addition, mere aggregation of another work not based on the + Program with the Program (or with a work based on the Program) on + a volume of a storage or distribution medium does not bring the + other work under the scope of this License. + + 4. You may copy and distribute the Program (or a work based on it, + under Section 2) in object code or executable form under the terms + of Sections 1 and 2 above provided that you also do one of the + following: + + a. Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of + Sections 1 and 2 above on a medium customarily used for + software interchange; or, + + b. Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a + medium customarily used for software interchange; or, + + c. Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with + such an offer, in accord with Subsection b above.) + + The source code for a work means the preferred form of the work for + making modifications to it. For an executable work, complete + source code means all the source code for all modules it contains, + plus any associated interface definition files, plus the scripts + used to control compilation and installation of the executable. + However, as a special exception, the source code distributed need + not include anything that is normally distributed (in either + source or binary form) with the major components (compiler, + kernel, and so on) of the operating system on which the executable + runs, unless that component itself accompanies the executable. + + If distribution of executable or object code is made by offering + access to copy from a designated place, then offering equivalent + access to copy the source code from the same place counts as + distribution of the source code, even though third parties are not + compelled to copy the source along with the object code. + + 5. You may not copy, modify, sublicense, or distribute the Program + except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense or distribute the Program is + void, and will automatically terminate your rights under this + License. However, parties who have received copies, or rights, + from you under this License will not have their licenses + terminated so long as such parties remain in full compliance. + + 6. You are not required to accept this License, since you have not + signed it. However, nothing else grants you permission to modify + or distribute the Program or its derivative works. These actions + are prohibited by law if you do not accept this License. + Therefore, by modifying or distributing the Program (or any work + based on the Program), you indicate your acceptance of this + License to do so, and all its terms and conditions for copying, + distributing or modifying the Program or works based on it. + + 7. Each time you redistribute the Program (or any work based on the + Program), the recipient automatically receives a license from the + original licensor to copy, distribute or modify the Program + subject to these terms and conditions. You may not impose any + further restrictions on the recipients' exercise of the rights + granted herein. You are not responsible for enforcing compliance + by third parties to this License. + + 8. If, as a consequence of a court judgment or allegation of patent + infringement or for any other reason (not limited to patent + issues), conditions are imposed on you (whether by court order, + agreement or otherwise) that contradict the conditions of this + License, they do not excuse you from the conditions of this + License. If you cannot distribute so as to satisfy simultaneously + your obligations under this License and any other pertinent + obligations, then as a consequence you may not distribute the + Program at all. For example, if a patent license would not permit + royalty-free redistribution of the Program by all those who + receive copies directly or indirectly through you, then the only + way you could satisfy both it and this License would be to refrain + entirely from distribution of the Program. + + If any portion of this section is held invalid or unenforceable + under any particular circumstance, the balance of the section is + intended to apply and the section as a whole is intended to apply + in other circumstances. + + It is not the purpose of this section to induce you to infringe any + patents or other property right claims or to contest validity of + any such claims; this section has the sole purpose of protecting + the integrity of the free software distribution system, which is + implemented by public license practices. Many people have made + generous contributions to the wide range of software distributed + through that system in reliance on consistent application of that + system; it is up to the author/donor to decide if he or she is + willing to distribute software through any other system and a + licensee cannot impose that choice. + + This section is intended to make thoroughly clear what is believed + to be a consequence of the rest of this License. + + 9. If the distribution and/or use of the Program is restricted in + certain countries either by patents or by copyrighted interfaces, + the original copyright holder who places the Program under this + License may add an explicit geographical distribution limitation + excluding those countries, so that distribution is permitted only + in or among countries not thus excluded. In such case, this + License incorporates the limitation as if written in the body of + this License. + + 10. The Free Software Foundation may publish revised and/or new + versions of the General Public License from time to time. Such + new versions will be similar in spirit to the present version, but + may differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the + Program specifies a version number of this License which applies + to it and "any later version", you have the option of following + the terms and conditions either of that version or of any later + version published by the Free Software Foundation. If the Program + does not specify a version number of this License, you may choose + any version ever published by the Free Software Foundation. + + 11. If you wish to incorporate parts of the Program into other free + programs whose distribution conditions are different, write to the + author to ask for permission. For software which is copyrighted + by the Free Software Foundation, write to the Free Software + Foundation; we sometimes make exceptions for this. Our decision + will be guided by the two goals of preserving the free status of + all derivatives of our free software and of promoting the sharing + and reuse of software generally. + + NO WARRANTY + 12. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO + WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE + LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT + HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT + WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT + NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE + QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE + PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY + SERVICING, REPAIR OR CORRECTION. + + 13. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN + WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY + MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE + LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, + INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR + INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF + DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU + OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY + OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN + ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS +How to Apply These Terms to Your New Programs +============================================= + +If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these +terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + ONE LINE TO GIVE THE PROGRAM'S NAME AND AN IDEA OF WHAT IT DOES. + Copyright (C) 19YY NAME OF AUTHOR + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + + Also add information on how to contact you by electronic and paper +mail. + + If the program is interactive, make it output a short notice like +this when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19YY NAME OF AUTHOR + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details + type `show w'. This is free software, and you are welcome + to redistribute it under certain conditions; type `show c' + for details. + + The hypothetical commands `show w' and `show c' should show the +appropriate parts of the General Public License. Of course, the +commands you use may be called something other than `show w' and `show +c'; they could even be mouse-clicks or menu items--whatever suits your +program. + + You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the program, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright + interest in the program `Gnomovision' + (which makes passes at compilers) written + by James Hacker. + + SIGNATURE OF TY COON, 1 April 1989 + Ty Coon, President of Vice + + This General Public License does not permit incorporating your +program into proprietary programs. If your program is a subroutine +library, you may consider it more useful to permit linking proprietary +applications with the library. If this is what you want to do, use the +GNU Library General Public License instead of this License. + + +File: mach.info, Node: Documentation License, Next: Concept Index, Prev: Copying, Up: Top + +Appendix B Documentation License +******************************** + +This manual is copyrighted and licensed under the GNU Free Documentation +license. + + Parts of this manual are derived from the Mach manual packages +originally provided by Carnegie Mellon University. + +* Menu: + +* Free Documentation License:: The GNU Free Documentation License. +* CMU License:: The CMU license applies to the original Mach + kernel and its documentation. + + +File: mach.info, Node: Free Documentation License, Next: CMU License, Up: Documentation License + +B.1 GNU Free Documentation License +================================== + + Version 1.1, March 2000 + + Copyright (C) 2000 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + 0. PREAMBLE + + The purpose of this License is to make a manual, textbook, or other + written document "free" in the sense of freedom: to assure everyone + the effective freedom to copy and redistribute it, with or without + modifying it, either commercially or noncommercially. Secondarily, + this License preserves for the author and publisher a way to get + credit for their work, while not being considered responsible for + modifications made by others. + + This License is a kind of "copyleft", which means that derivative + works of the document must themselves be free in the same sense. + It complements the GNU General Public License, which is a copyleft + license designed for free software. + + We have designed this License in order to use it for manuals for + free software, because free software needs free documentation: a + free program should come with manuals providing the same freedoms + that the software does. But this License is not limited to + software manuals; it can be used for any textual work, regardless + of subject matter or whether it is published as a printed book. + We recommend this License principally for works whose purpose is + instruction or reference. + + 1. APPLICABILITY AND DEFINITIONS + + This License applies to any manual or other work that contains a + notice placed by the copyright holder saying it can be distributed + under the terms of this License. The "Document", below, refers to + any such manual or work. Any member of the public is a licensee, + and is addressed as "you". + + A "Modified Version" of the Document means any work containing the + Document or a portion of it, either copied verbatim, or with + modifications and/or translated into another language. + + A "Secondary Section" is a named appendix or a front-matter + section of the Document that deals exclusively with the + relationship of the publishers or authors of the Document to the + Document's overall subject (or to related matters) and contains + nothing that could fall directly within that overall subject. + (For example, if the Document is in part a textbook of + mathematics, a Secondary Section may not explain any mathematics.) + The relationship could be a matter of historical connection with + the subject or with related matters, or of legal, commercial, + philosophical, ethical or political position regarding them. + + The "Invariant Sections" are certain Secondary Sections whose + titles are designated, as being those of Invariant Sections, in + the notice that says that the Document is released under this + License. + + The "Cover Texts" are certain short passages of text that are + listed, as Front-Cover Texts or Back-Cover Texts, in the notice + that says that the Document is released under this License. + + A "Transparent" copy of the Document means a machine-readable copy, + represented in a format whose specification is available to the + general public, whose contents can be viewed and edited directly + and straightforwardly with generic text editors or (for images + composed of pixels) generic paint programs or (for drawings) some + widely available drawing editor, and that is suitable for input to + text formatters or for automatic translation to a variety of + formats suitable for input to text formatters. A copy made in an + otherwise Transparent file format whose markup has been designed + to thwart or discourage subsequent modification by readers is not + Transparent. A copy that is not "Transparent" is called "Opaque". + + Examples of suitable formats for Transparent copies include plain + ASCII without markup, Texinfo input format, LaTeX input format, + SGML or XML using a publicly available DTD, and + standard-conforming simple HTML designed for human modification. + Opaque formats include PostScript, PDF, proprietary formats that + can be read and edited only by proprietary word processors, SGML + or XML for which the DTD and/or processing tools are not generally + available, and the machine-generated HTML produced by some word + processors for output purposes only. + + The "Title Page" means, for a printed book, the title page itself, + plus such following pages as are needed to hold, legibly, the + material this License requires to appear in the title page. For + works in formats which do not have any title page as such, "Title + Page" means the text near the most prominent appearance of the + work's title, preceding the beginning of the body of the text. + + 2. VERBATIM COPYING + + You may copy and distribute the Document in any medium, either + commercially or noncommercially, provided that this License, the + copyright notices, and the license notice saying this License + applies to the Document are reproduced in all copies, and that you + add no other conditions whatsoever to those of this License. You + may not use technical measures to obstruct or control the reading + or further copying of the copies you make or distribute. However, + you may accept compensation in exchange for copies. If you + distribute a large enough number of copies you must also follow + the conditions in section 3. + + You may also lend copies, under the same conditions stated above, + and you may publicly display copies. + + 3. COPYING IN QUANTITY + + If you publish printed copies of the Document numbering more than + 100, and the Document's license notice requires Cover Texts, you + must enclose the copies in covers that carry, clearly and legibly, + all these Cover Texts: Front-Cover Texts on the front cover, and + Back-Cover Texts on the back cover. Both covers must also clearly + and legibly identify you as the publisher of these copies. The + front cover must present the full title with all words of the + title equally prominent and visible. You may add other material + on the covers in addition. Copying with changes limited to the + covers, as long as they preserve the title of the Document and + satisfy these conditions, can be treated as verbatim copying in + other respects. + + If the required texts for either cover are too voluminous to fit + legibly, you should put the first ones listed (as many as fit + reasonably) on the actual cover, and continue the rest onto + adjacent pages. + + If you publish or distribute Opaque copies of the Document + numbering more than 100, you must either include a + machine-readable Transparent copy along with each Opaque copy, or + state in or with each Opaque copy a publicly-accessible + computer-network location containing a complete Transparent copy + of the Document, free of added material, which the general + network-using public has access to download anonymously at no + charge using public-standard network protocols. If you use the + latter option, you must take reasonably prudent steps, when you + begin distribution of Opaque copies in quantity, to ensure that + this Transparent copy will remain thus accessible at the stated + location until at least one year after the last time you + distribute an Opaque copy (directly or through your agents or + retailers) of that edition to the public. + + It is requested, but not required, that you contact the authors of + the Document well before redistributing any large number of + copies, to give them a chance to provide you with an updated + version of the Document. + + 4. MODIFICATIONS + + You may copy and distribute a Modified Version of the Document + under the conditions of sections 2 and 3 above, provided that you + release the Modified Version under precisely this License, with + the Modified Version filling the role of the Document, thus + licensing distribution and modification of the Modified Version to + whoever possesses a copy of it. In addition, you must do these + things in the Modified Version: + + A. Use in the Title Page (and on the covers, if any) a title + distinct from that of the Document, and from those of + previous versions (which should, if there were any, be listed + in the History section of the Document). You may use the + same title as a previous version if the original publisher of + that version gives permission. + + B. List on the Title Page, as authors, one or more persons or + entities responsible for authorship of the modifications in + the Modified Version, together with at least five of the + principal authors of the Document (all of its principal + authors, if it has less than five). + + C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. + + D. Preserve all the copyright notices of the Document. + + E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. + + F. Include, immediately after the copyright notices, a license + notice giving the public permission to use the Modified + Version under the terms of this License, in the form shown in + the Addendum below. + + G. Preserve in that license notice the full lists of Invariant + Sections and required Cover Texts given in the Document's + license notice. + + H. Include an unaltered copy of this License. + + I. Preserve the section entitled "History", and its title, and + add to it an item stating at least the title, year, new + authors, and publisher of the Modified Version as given on + the Title Page. If there is no section entitled "History" in + the Document, create one stating the title, year, authors, + and publisher of the Document as given on its Title Page, + then add an item describing the Modified Version as stated in + the previous sentence. + + J. Preserve the network location, if any, given in the Document + for public access to a Transparent copy of the Document, and + likewise the network locations given in the Document for + previous versions it was based on. These may be placed in + the "History" section. You may omit a network location for a + work that was published at least four years before the + Document itself, or if the original publisher of the version + it refers to gives permission. + + K. In any section entitled "Acknowledgments" or "Dedications", + preserve the section's title, and preserve in the section all + the substance and tone of each of the contributor + acknowledgments and/or dedications given therein. + + L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section + titles. + + M. Delete any section entitled "Endorsements". Such a section + may not be included in the Modified Version. + + N. Do not retitle any existing section as "Endorsements" or to + conflict in title with any Invariant Section. + + If the Modified Version includes new front-matter sections or + appendices that qualify as Secondary Sections and contain no + material copied from the Document, you may at your option + designate some or all of these sections as invariant. To do this, + add their titles to the list of Invariant Sections in the Modified + Version's license notice. These titles must be distinct from any + other section titles. + + You may add a section entitled "Endorsements", provided it contains + nothing but endorsements of your Modified Version by various + parties--for example, statements of peer review or that the text + has been approved by an organization as the authoritative + definition of a standard. + + You may add a passage of up to five words as a Front-Cover Text, + and a passage of up to 25 words as a Back-Cover Text, to the end + of the list of Cover Texts in the Modified Version. Only one + passage of Front-Cover Text and one of Back-Cover Text may be + added by (or through arrangements made by) any one entity. If the + Document already includes a cover text for the same cover, + previously added by you or by arrangement made by the same entity + you are acting on behalf of, you may not add another; but you may + replace the old one, on explicit permission from the previous + publisher that added the old one. + + The author(s) and publisher(s) of the Document do not by this + License give permission to use their names for publicity for or to + assert or imply endorsement of any Modified Version. + + 5. COMBINING DOCUMENTS + + You may combine the Document with other documents released under + this License, under the terms defined in section 4 above for + modified versions, provided that you include in the combination + all of the Invariant Sections of all of the original documents, + unmodified, and list them all as Invariant Sections of your + combined work in its license notice. + + The combined work need only contain one copy of this License, and + multiple identical Invariant Sections may be replaced with a single + copy. If there are multiple Invariant Sections with the same name + but different contents, make the title of each such section unique + by adding at the end of it, in parentheses, the name of the + original author or publisher of that section if known, or else a + unique number. Make the same adjustment to the section titles in + the list of Invariant Sections in the license notice of the + combined work. + + In the combination, you must combine any sections entitled + "History" in the various original documents, forming one section + entitled "History"; likewise combine any sections entitled + "Acknowledgments", and any sections entitled "Dedications". You + must delete all sections entitled "Endorsements." + + 6. COLLECTIONS OF DOCUMENTS + + You may make a collection consisting of the Document and other + documents released under this License, and replace the individual + copies of this License in the various documents with a single copy + that is included in the collection, provided that you follow the + rules of this License for verbatim copying of each of the + documents in all other respects. + + You may extract a single document from such a collection, and + distribute it individually under this License, provided you insert + a copy of this License into the extracted document, and follow + this License in all other respects regarding verbatim copying of + that document. + + 7. AGGREGATION WITH INDEPENDENT WORKS + + A compilation of the Document or its derivatives with other + separate and independent documents or works, in or on a volume of + a storage or distribution medium, does not as a whole count as a + Modified Version of the Document, provided no compilation + copyright is claimed for the compilation. Such a compilation is + called an "aggregate", and this License does not apply to the + other self-contained works thus compiled with the Document, on + account of their being thus compiled, if they are not themselves + derivative works of the Document. + + If the Cover Text requirement of section 3 is applicable to these + copies of the Document, then if the Document is less than one + quarter of the entire aggregate, the Document's Cover Texts may be + placed on covers that surround only the Document within the + aggregate. Otherwise they must appear on covers around the whole + aggregate. + + 8. TRANSLATION + + Translation is considered a kind of modification, so you may + distribute translations of the Document under the terms of section + 4. Replacing Invariant Sections with translations requires special + permission from their copyright holders, but you may include + translations of some or all Invariant Sections in addition to the + original versions of these Invariant Sections. You may include a + translation of this License provided that you also include the + original English version of this License. In case of a + disagreement between the translation and the original English + version of this License, the original English version will prevail. + + 9. TERMINATION + + You may not copy, modify, sublicense, or distribute the Document + except as expressly provided for under this License. Any other + attempt to copy, modify, sublicense or distribute the Document is + void, and will automatically terminate your rights under this + License. However, parties who have received copies, or rights, + from you under this License will not have their licenses + terminated so long as such parties remain in full compliance. + + 10. FUTURE REVISIONS OF THIS LICENSE + + The Free Software Foundation may publish new, revised versions of + the GNU Free Documentation License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. See + `http://www.gnu.org/copyleft/'. + + Each version of the License is given a distinguishing version + number. If the Document specifies that a particular numbered + version of this License "or any later version" applies to it, you + have the option of following the terms and conditions either of + that specified version or of any later version that has been + published (not as a draft) by the Free Software Foundation. If + the Document does not specify a version number of this License, + you may choose any version ever published (not as a draft) by the + Free Software Foundation. + +B.1.0.1 ADDENDUM: How to use this License for your documents +............................................................ + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and license +notices just after the title page: + + Copyright (C) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.1 + or any later version published by the Free Software Foundation; + with the Invariant Sections being LIST THEIR TITLES, with the + Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. + A copy of the license is included in the section entitled ``GNU + Free Documentation License''. + + If you have no Invariant Sections, write "with no Invariant Sections" +instead of saying which ones are invariant. If you have no Front-Cover +Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being +LIST"; likewise for Back-Cover Texts. + + If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, to +permit their use in free software. + + +File: mach.info, Node: CMU License, Prev: Free Documentation License, Up: Documentation License + +B.2 CMU License +=============== + + Mach Operating System + Copyright (C) 1991,1990,1989 Carnegie Mellon University + All Rights Reserved. + + Permission to use, copy, modify and distribute this software and + its documentation is hereby granted, provided that both the + copyright notice and this permission notice appear in all copies + of the software, derivative works or modified versions, and any + portions thereof, and that both notices appear in supporting + documentation. + + CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" + CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR + ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. + + Carnegie Mellon requests users of this software to return to + + Software Distribution Coordinator + School of Computer Science + Carnegie Mellon University + Pittsburgh PA 15213-3890 + + or <Software.Distribution@CS.CMU.EDU> any improvements or + extensions that they make and grant Carnegie Mellon the rights to + redistribute these changes. + + +File: mach.info, Node: Concept Index, Next: Function and Data Index, Prev: Documentation License, Up: Top + +Concept Index +************* + + +* Menu: + +* communication between tasks: Major Concepts. (line 6) +* composing messages: Message Format. (line 6) +* device port: Device Interface. (line 13) +* FDL, GNU Free Documentation License: Free Documentation License. + (line 6) +* format of a message: Message Format. (line 6) +* GPL, GNU General Public License: Copying. (line 6) +* GRand Unified Bootloader: Bootloader. (line 13) +* GRUB: Bootloader. (line 13) +* host control port: Host Ports. (line 34) +* host interface: Host Interface. (line 6) +* host name port: Host Ports. (line 6) +* host ports: Host Ports. (line 6) +* interprocess communication (IPC): Major Concepts. (line 6) +* IPC (interprocess communication): Major Concepts. (line 6) +* IPC space port: Port Manipulation Interface. + (line 9) +* message composition: Message Format. (line 6) +* message format: Message Format. (line 6) +* messages: Major Concepts. (line 6) +* moving port rights: Exchanging Port Rights. + (line 6) +* port representing a device: Device Interface. (line 13) +* port representing a processor: Processor Interface. (line 6) +* port representing a processor set name: Processor Set Ports. (line 6) +* port representing a task: Task Interface. (line 6) +* port representing a thread: Thread Interface. (line 6) +* port representing a virtual memory map: Virtual Memory Interface. + (line 6) +* port representing an IPC space: Port Manipulation Interface. + (line 9) +* ports representing a host: Host Ports. (line 6) +* ports representing a processor set: Processor Set Ports. (line 6) +* processor port: Processor Interface. (line 6) +* processor set name port: Processor Set Ports. (line 6) +* processor set port: Processor Set Ports. (line 13) +* processor set ports: Processor Set Ports. (line 6) +* receiving memory: Memory. (line 6) +* receiving port rights: Exchanging Port Rights. + (line 6) +* remote procedure calls (RPC): Major Concepts. (line 6) +* RPC (remote procedure calls): Major Concepts. (line 6) +* sending memory: Memory. (line 6) +* sending messages: Message Send. (line 6) +* sending port rights: Exchanging Port Rights. + (line 6) +* serverboot: Modules. (line 6) +* task port: Task Interface. (line 6) +* thread port: Thread Interface. (line 6) +* virtual memory map port: Virtual Memory Interface. + (line 6) + + +File: mach.info, Node: Function and Data Index, Prev: Concept Index, Up: Top + +Function and Data Index +*********************** + + +* Menu: + +* catch_exception_raise: Exceptions. (line 9) +* device_close: Device Close. (line 7) +* device_get_status: Device Status. (line 20) +* device_map: Device Map. (line 9) +* device_open: Device Open. (line 8) +* device_open_request: Device Open. (line 36) +* device_read: Device Read. (line 9) +* device_read_inband: Device Read. (line 27) +* device_read_request: Device Read. (line 34) +* device_read_request_inband: Device Read. (line 51) +* device_reply_server: Device Reply Server. (line 12) +* device_set_filter: Device Filter. (line 10) +* device_set_status: Device Status. (line 9) +* device_t: Device Interface. (line 14) +* device_write: Device Write. (line 9) +* device_write_inband: Device Write. (line 24) +* device_write_request: Device Write. (line 31) +* device_write_request_inband: Device Write. (line 49) +* ds_device_open_reply: Device Open. (line 39) +* ds_device_read_reply: Device Read. (line 37) +* ds_device_read_reply_inband: Device Read. (line 54) +* ds_device_write_reply: Device Write. (line 34) +* ds_device_write_reply_inband: Device Write. (line 52) +* evc_wait: Exceptions. (line 18) +* exception_raise: Exceptions. (line 15) +* host_adjust_time: Host Time. (line 43) +* host_basic_info_t: Host Information. (line 75) +* host_get_boot_info: Host Information. (line 114) +* host_get_time: Host Time. (line 34) +* host_info: Host Information. (line 9) +* host_kernel_version: Host Information. (line 96) +* host_priv_t: Host Ports. (line 35) +* host_processor_set_priv: Processor Set Access. + (line 25) +* host_processor_sets: Processor Set Access. + (line 9) +* host_processors: Hosted Processors. (line 9) +* host_reboot: Host Reboot. (line 8) +* host_sched_info_t: Host Information. (line 92) +* host_set_time: Host Time. (line 39) +* host_t: Host Ports. (line 7) +* ipc_space_t: Port Manipulation Interface. + (line 10) +* mach_host_self: Host Ports. (line 14) +* mach_msg: Mach Message Call. (line 13) +* mach_msg_bits_t: Message Format. (line 21) +* mach_msg_header_t: Message Format. (line 33) +* mach_msg_id_t: Message Format. (line 29) +* mach_msg_size_t: Message Format. (line 25) +* mach_msg_timeout_t: Mach Message Call. (line 61) +* mach_msg_type_long_t: Message Format. (line 248) +* mach_msg_type_name_t: Message Format. (line 128) +* mach_msg_type_number_t: Message Format. (line 138) +* MACH_MSG_TYPE_PORT_ANY: Message Format. (line 234) +* MACH_MSG_TYPE_PORT_ANY_RIGHT: Message Format. (line 244) +* MACH_MSG_TYPE_PORT_ANY_SEND: Message Format. (line 239) +* mach_msg_type_size_t: Message Format. (line 133) +* mach_msg_type_t: Message Format. (line 143) +* MACH_MSGH_BITS: Message Format. (line 96) +* MACH_MSGH_BITS_LOCAL: Message Format. (line 108) +* MACH_MSGH_BITS_OTHER: Message Format. (line 117) +* MACH_MSGH_BITS_PORTS: Message Format. (line 112) +* MACH_MSGH_BITS_REMOTE: Message Format. (line 103) +* mach_port_allocate: Port Creation. (line 8) +* mach_port_allocate_name: Port Creation. (line 66) +* mach_port_deallocate: Port Destruction. (line 8) +* mach_port_destroy: Port Destruction. (line 30) +* mach_port_extract_right: Ports and other Tasks. + (line 59) +* mach_port_get_receive_status: Receive Rights. (line 57) +* mach_port_get_refs: Port Rights. (line 9) +* mach_port_get_set_status: Port Sets. (line 9) +* mach_port_insert_right: Ports and other Tasks. + (line 9) +* mach_port_mod_refs: Port Rights. (line 42) +* mach_port_move_member: Port Sets. (line 28) +* mach_port_mscount_t: Receive Rights. (line 11) +* mach_port_msgcount_t: Receive Rights. (line 15) +* mach_port_names: Port Names. (line 9) +* mach_port_rename: Port Names. (line 77) +* mach_port_request_notification: Request Notifications. + (line 10) +* mach_port_rights_t: Receive Rights. (line 19) +* mach_port_seqno_t: Receive Rights. (line 7) +* mach_port_set_mscount: Receive Rights. (line 73) +* mach_port_set_qlimit: Receive Rights. (line 90) +* mach_port_set_seqno: Receive Rights. (line 108) +* mach_port_status_t: Receive Rights. (line 23) +* mach_port_t: Message Format. (line 14) +* mach_port_type: Port Names. (line 35) +* mach_reply_port: Port Creation. (line 48) +* mach_task_self: Task Information. (line 7) +* mach_thread_self: Thread Information. (line 7) +* mapped_time_value_t: Host Time. (line 51) +* memory_object_change_attributes: Memory Object Attributes. + (line 30) +* memory_object_change_completed: Memory Object Attributes. + (line 63) +* memory_object_copy: Memory Objects and Data. + (line 209) +* memory_object_create: Default Memory Manager. + (line 30) +* memory_object_data_error: Memory Objects and Data. + (line 157) +* memory_object_data_initialize: Default Memory Manager. + (line 73) +* memory_object_data_provided: Memory Objects and Data. + (line 289) +* memory_object_data_request: Memory Objects and Data. + (line 49) +* memory_object_data_return: Memory Objects and Data. + (line 11) +* memory_object_data_supply: Memory Objects and Data. + (line 84) +* memory_object_data_unavailable: Memory Objects and Data. + (line 177) +* memory_object_data_unlock: Memory Object Locking. + (line 85) +* memory_object_data_write: Memory Objects and Data. + (line 260) +* memory_object_default_server: Memory Object Server. + (line 10) +* memory_object_destroy: Memory Object Termination. + (line 37) +* memory_object_get_attributes: Memory Object Attributes. + (line 10) +* memory_object_init: Memory Object Creation. + (line 11) +* memory_object_lock_completed: Memory Object Locking. + (line 59) +* memory_object_lock_request: Memory Object Locking. + (line 11) +* memory_object_ready: Memory Object Creation. + (line 52) +* memory_object_server: Memory Object Server. + (line 8) +* memory_object_set_attributes: Memory Object Attributes. + (line 82) +* memory_object_supply_completed: Memory Objects and Data. + (line 127) +* memory_object_terminate: Memory Object Termination. + (line 10) +* processor_assign: Processors and Sets. (line 8) +* processor_basic_info_t: Processor Info. (line 67) +* processor_control: Processor Control. (line 10) +* processor_exit: Processor Control. (line 8) +* processor_get_assignment: Processors and Sets. (line 32) +* processor_info: Processor Info. (line 9) +* processor_set_basic_info_t: Processor Set Info. (line 75) +* processor_set_create: Processor Set Creation. + (line 8) +* processor_set_default: Processor Set Access. + (line 36) +* processor_set_destroy: Processor Set Destruction. + (line 8) +* processor_set_info: Processor Set Info. (line 10) +* processor_set_max_priority: Processor Set Priority. + (line 9) +* processor_set_name_t: Processor Set Ports. (line 7) +* processor_set_policy_disable: Processor Set Policy. + (line 11) +* processor_set_policy_enable: Processor Set Policy. + (line 8) +* processor_set_sched_info_t: Processor Set Info. (line 93) +* processor_set_t: Processor Set Ports. (line 14) +* processor_set_tasks: Tasks and Threads on Sets. + (line 9) +* processor_set_threads: Tasks and Threads on Sets. + (line 23) +* processor_start: Processor Control. (line 7) +* processor_t: Processor Interface. (line 7) +* sampled_pc_flavor_t: Profiling. (line 67) +* sampled_pc_t: Profiling. (line 52) +* seqnos_memory_object_change_completed: Memory Object Attributes. + (line 67) +* seqnos_memory_object_copy: Memory Objects and Data. + (line 214) +* seqnos_memory_object_create: Default Memory Manager. + (line 35) +* seqnos_memory_object_data_initialize: Default Memory Manager. + (line 77) +* seqnos_memory_object_data_request: Memory Objects and Data. + (line 53) +* seqnos_memory_object_data_return: Memory Objects and Data. + (line 16) +* seqnos_memory_object_data_unlock: Memory Object Locking. + (line 89) +* seqnos_memory_object_data_write: Memory Objects and Data. + (line 264) +* seqnos_memory_object_default_server: Memory Object Server. + (line 14) +* seqnos_memory_object_init: Memory Object Creation. + (line 16) +* seqnos_memory_object_lock_completed: Memory Object Locking. + (line 63) +* seqnos_memory_object_server: Memory Object Server. + (line 12) +* seqnos_memory_object_supply_completed: Memory Objects and Data. + (line 132) +* seqnos_memory_object_terminate: Memory Object Termination. + (line 14) +* struct host_basic_info: Host Information. (line 48) +* struct host_sched_info: Host Information. (line 78) +* struct processor_basic_info: Processor Info. (line 44) +* struct processor_set_basic_info: Processor Set Info. (line 51) +* struct processor_set_sched_info: Processor Set Info. (line 78) +* struct task_basic_info: Task Information. (line 82) +* struct task_events_info: Task Information. (line 114) +* struct task_thread_times_info: Task Information. (line 145) +* struct thread_basic_info: Thread Information. (line 66) +* struct thread_sched_info: Thread Information. (line 128) +* swtch: Hand-Off Scheduling. (line 81) +* swtch_pri: Hand-Off Scheduling. (line 93) +* task_assign: Tasks and Threads on Sets. + (line 36) +* task_assign_default: Tasks and Threads on Sets. + (line 49) +* task_basic_info_t: Task Information. (line 111) +* task_create: Task Creation. (line 8) +* task_disable_pc_sampling: Profiling. (line 22) +* task_enable_pc_sampling: Profiling. (line 8) +* task_events_info_t: Task Information. (line 142) +* task_get_assignment: Tasks and Threads on Sets. + (line 60) +* task_get_bootstrap_port: Task Special Ports. (line 42) +* task_get_emulation_vector: Syscall Emulation. (line 9) +* task_get_exception_port: Task Special Ports. (line 36) +* task_get_kernel_port: Task Special Ports. (line 30) +* task_get_sampled_pcs: Profiling. (line 36) +* task_get_special_port: Task Special Ports. (line 8) +* task_info: Task Information. (line 44) +* task_priority: Task Execution. (line 29) +* task_ras_control: Task Execution. (line 47) +* task_resume: Task Execution. (line 19) +* task_set_bootstrap_port: Task Special Ports. (line 78) +* task_set_emulation: Syscall Emulation. (line 22) +* task_set_emulation_vector: Syscall Emulation. (line 15) +* task_set_exception_port: Task Special Ports. (line 72) +* task_set_kernel_port: Task Special Ports. (line 66) +* task_set_special_port: Task Special Ports. (line 48) +* task_suspend: Task Execution. (line 7) +* task_t: Task Interface. (line 7) +* task_terminate: Task Termination. (line 7) +* task_thread_times_info_t: Task Information. (line 159) +* task_threads: Task Information. (line 33) +* thread_abort: Thread Execution. (line 38) +* thread_assign: Tasks and Threads on Sets. + (line 72) +* thread_assign_default: Tasks and Threads on Sets. + (line 85) +* thread_basic_info_t: Thread Information. (line 125) +* thread_create: Thread Creation. (line 8) +* thread_depress_abort: Hand-Off Scheduling. (line 74) +* thread_disable_pc_sampling: Profiling. (line 24) +* thread_enable_pc_sampling: Profiling. (line 10) +* thread_get_assignment: Tasks and Threads on Sets. + (line 96) +* thread_get_exception_port: Thread Special Ports. + (line 27) +* thread_get_kernel_port: Thread Special Ports. + (line 21) +* thread_get_sampled_pcs: Profiling. (line 39) +* thread_get_special_port: Thread Special Ports. + (line 8) +* thread_get_state: Thread Execution. (line 102) +* thread_info: Thread Information. (line 33) +* thread_max_priority: Thread Priority. (line 38) +* thread_policy: Scheduling Policy. (line 8) +* thread_priority: Thread Priority. (line 20) +* thread_resume: Thread Execution. (line 29) +* thread_sched_info_t: Thread Information. (line 159) +* thread_set_exception_port: Thread Special Ports. + (line 52) +* thread_set_kernel_port: Thread Special Ports. + (line 46) +* thread_set_special_port: Thread Special Ports. + (line 33) +* thread_set_state: Thread Execution. (line 126) +* thread_suspend: Thread Execution. (line 7) +* thread_switch: Hand-Off Scheduling. (line 8) +* thread_t: Thread Interface. (line 7) +* thread_terminate: Thread Termination. (line 7) +* thread_wire: Thread Settings. (line 8) +* time_value_add: Host Time. (line 25) +* time_value_add_usec: Host Time. (line 21) +* time_value_t: Host Time. (line 7) +* vm_allocate: Memory Allocation. (line 8) +* vm_copy: Data Transfer. (line 53) +* vm_deallocate: Memory Deallocation. (line 8) +* vm_inherit: Memory Attributes. (line 70) +* vm_machine_attribute: Memory Attributes. (line 134) +* vm_map: Mapping Memory Objects. + (line 11) +* vm_protect: Memory Attributes. (line 36) +* vm_read: Data Transfer. (line 9) +* vm_region: Memory Attributes. (line 11) +* vm_set_default_memory_manager: Default Memory Manager. + (line 8) +* vm_statistics: Memory Statistics. (line 52) +* vm_statistics_data_t: Memory Statistics. (line 7) +* vm_task_t: Virtual Memory Interface. + (line 7) +* vm_wire: Memory Attributes. (line 101) +* vm_write: Data Transfer. (line 34) + + diff --git a/doc/stamp-vti b/doc/stamp-vti new file mode 100644 index 0000000..cab3d80 --- /dev/null +++ b/doc/stamp-vti @@ -0,0 +1,4 @@ +@set UPDATED 7 October 2006 +@set UPDATED-MONTH October 2006 +@set EDITION 1.3.99 +@set VERSION 1.3.99 |