summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/mach.info175
-rw-r--r--doc/mach.info-16683
-rw-r--r--doc/mach.info-21663
-rw-r--r--doc/stamp-vti4
4 files changed, 8525 insertions, 0 deletions
diff --git a/doc/mach.info b/doc/mach.info
new file mode 100644
index 0000000..c2100e5
--- /dev/null
+++ b/doc/mach.info
@@ -0,0 +1,175 @@
+This is ../doc/mach.info, produced by makeinfo version 4.8 from
+../doc/mach.texi.
+
+INFO-DIR-SECTION Kernel
+START-INFO-DIR-ENTRY
+* GNUMach: (mach). Using and programming the GNU Mach microkernel.
+END-INFO-DIR-ENTRY
+
+ This file documents the GNU Mach microkernel.
+
+ This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach
+Reference Manual', for Version 1.3.99.
+
+ Copyright (C) 2001 Free Software Foundation, Inc.
+
+ Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being "Free Software Needs Free Documentation" and
+"GNU Lesser General Public License", the Front-Cover texts being (a)
+(see below), and with the Back-Cover Texts being (b) (see below). A
+copy of the license is included in the section entitled "GNU Free
+Documentation License".
+
+ (a) The FSF's Front-Cover Text is:
+
+ A GNU Manual
+
+ (b) The FSF's Back-Cover Text is:
+
+ You have freedom to copy and modify this GNU Manual, like GNU
+software. Copies published by the Free Software Foundation raise
+funds for GNU development.
+
+ This work is based on manual pages under the following copyright and
+license:
+
+Mach Operating System
+Copyright (C) 1991,1990 Carnegie Mellon University
+All Rights Reserved.
+
+ Permission to use, copy, modify and distribute this software and its
+documentation is hereby granted, provided that both the copyright
+notice and this permission notice appear in all copies of the software,
+derivative works or modified versions, and any portions thereof, and
+that both notices appear in supporting documentation.
+
+ CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
+CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY
+DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
+
+
+Indirect:
+mach.info-1: 1914
+mach.info-2: 296589
+
+Tag Table:
+(Indirect)
+Node: Top1914
+Node: Introduction10176
+Node: Audience11007
+Node: Features12042
+Node: Overview13869
+Node: History15062
+Node: Installing15207
+Node: Binary Distributions16431
+Node: Compilation17240
+Node: Configuration18219
+Node: Cross-Compilation31019
+Node: Bootstrap31800
+Ref: Bootstrap-Footnote-132243
+Node: Bootloader32480
+Ref: Bootloader-Footnote-133781
+Node: Modules33863
+Node: Inter Process Communication34668
+Node: Major Concepts35291
+Node: Messaging Interface39096
+Node: Mach Message Call39826
+Node: Message Format43141
+Node: Exchanging Port Rights53602
+Ref: Exchanging Port Rights-Footnote-159168
+Node: Memory59341
+Ref: Memory-Footnote-162435
+Node: Message Send62777
+Ref: Message Send-Footnote-169803
+Node: Message Receive70085
+Ref: Message Receive-Footnote-178722
+Node: Atomicity79003
+Node: Port Manipulation Interface81776
+Node: Port Creation83252
+Node: Port Destruction88038
+Node: Port Names91181
+Node: Port Rights95419
+Node: Ports and other Tasks99216
+Node: Receive Rights103308
+Node: Port Sets108478
+Node: Request Notifications110881
+Node: Virtual Memory Interface115668
+Node: Memory Allocation116921
+Node: Memory Deallocation119446
+Node: Data Transfer120907
+Node: Memory Attributes124432
+Node: Mapping Memory Objects133844
+Node: Memory Statistics137133
+Node: External Memory Management138693
+Node: Memory Object Server139398
+Node: Memory Object Creation142107
+Node: Memory Object Termination146113
+Node: Memory Objects and Data149051
+Node: Memory Object Locking166200
+Node: Memory Object Attributes172093
+Node: Default Memory Manager177933
+Node: Threads and Tasks183654
+Node: Thread Interface183991
+Node: Thread Creation184992
+Node: Thread Termination186109
+Node: Thread Information186580
+Node: Thread Settings192652
+Node: Thread Execution193886
+Node: Scheduling201180
+Node: Thread Priority201535
+Node: Hand-Off Scheduling204174
+Node: Scheduling Policy209166
+Node: Thread Special Ports210499
+Node: Exceptions212945
+Node: Task Interface213824
+Node: Task Creation214836
+Node: Task Termination216171
+Node: Task Information216773
+Node: Task Execution223289
+Node: Task Special Ports227702
+Node: Syscall Emulation231555
+Node: Profiling232782
+Node: Host Interface236540
+Node: Host Ports237525
+Node: Host Information239598
+Node: Host Time244971
+Node: Host Reboot247630
+Node: Processors and Processor Sets248180
+Node: Processor Set Interface249158
+Node: Processor Set Ports249925
+Node: Processor Set Access250760
+Node: Processor Set Creation253023
+Node: Processor Set Destruction254050
+Node: Tasks and Threads on Sets254971
+Node: Processor Set Priority260145
+Node: Processor Set Policy261435
+Node: Processor Set Info263048
+Node: Processor Interface266851
+Node: Hosted Processors267576
+Node: Processor Control268567
+Node: Processors and Sets270033
+Node: Processor Info271914
+Node: Device Interface274650
+Node: Device Reply Server276265
+Node: Device Open277557
+Node: Device Close279677
+Node: Device Read280256
+Node: Device Write283175
+Node: Device Map285980
+Node: Device Status286876
+Node: Device Filter288049
+Node: Kernel Debugger292885
+Node: Operation293612
+Node: Commands296589
+Node: Variables309812
+Node: Expressions311199
+Node: Copying312548
+Node: Documentation License331757
+Node: Free Documentation License332345
+Node: CMU License352244
+Node: Concept Index353475
+Node: Function and Data Index357317
+
+End Tag Table
diff --git a/doc/mach.info-1 b/doc/mach.info-1
new file mode 100644
index 0000000..a1bb76c
--- /dev/null
+++ b/doc/mach.info-1
@@ -0,0 +1,6683 @@
+This is ../doc/mach.info, produced by makeinfo version 4.8 from
+../doc/mach.texi.
+
+INFO-DIR-SECTION Kernel
+START-INFO-DIR-ENTRY
+* GNUMach: (mach). Using and programming the GNU Mach microkernel.
+END-INFO-DIR-ENTRY
+
+ This file documents the GNU Mach microkernel.
+
+ This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach
+Reference Manual', for Version 1.3.99.
+
+ Copyright (C) 2001 Free Software Foundation, Inc.
+
+ Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being "Free Software Needs Free Documentation" and
+"GNU Lesser General Public License", the Front-Cover texts being (a)
+(see below), and with the Back-Cover Texts being (b) (see below). A
+copy of the license is included in the section entitled "GNU Free
+Documentation License".
+
+ (a) The FSF's Front-Cover Text is:
+
+ A GNU Manual
+
+ (b) The FSF's Back-Cover Text is:
+
+ You have freedom to copy and modify this GNU Manual, like GNU
+software. Copies published by the Free Software Foundation raise
+funds for GNU development.
+
+ This work is based on manual pages under the following copyright and
+license:
+
+Mach Operating System
+Copyright (C) 1991,1990 Carnegie Mellon University
+All Rights Reserved.
+
+ Permission to use, copy, modify and distribute this software and its
+documentation is hereby granted, provided that both the copyright
+notice and this permission notice appear in all copies of the software,
+derivative works or modified versions, and any portions thereof, and
+that both notices appear in supporting documentation.
+
+ CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
+CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY
+DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
+
+
+File: mach.info, Node: Top, Next: Introduction, Up: (dir)
+
+Main Menu
+*********
+
+This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach
+Reference Manual', for Version 1.3.99 of the GNU Mach microkernel.
+
+* Menu:
+
+* Introduction:: How to use this manual.
+* Installing:: Setting up GNU Mach on your computer.
+* Bootstrap:: Running GNU Mach on your machine.
+* Inter Process Communication:: Communication between process.
+* Virtual Memory Interface:: Allocating and deallocating virtual memory.
+* External Memory Management:: Handling memory pages in user space.
+* Threads and Tasks:: Handling of threads and tasks.
+* Host Interface:: Interface to a Mach host.
+* Processors and Processor Sets:: Handling processors and sets of processors.
+* Device Interface:: Accesing kernel devices.
+* Kernel Debugger:: How to use the built-in kernel debugger.
+
+Appendices
+
+* Copying:: The GNU General Public License says how you
+ can copy and share the GNU Mach microkernel.
+* Documentation License:: This manual is under the GNU Free
+ Documentation License.
+
+Indices
+
+* Concept Index:: Index of concepts and programs.
+* Function and Data Index:: Index of functions, variables and data types.
+
+
+ --- The Detailed Node Listing ---
+
+Introduction
+
+* Audience:: The people for whom this manual is written.
+* Features:: Reasons to install and use GNU Mach.
+* Overview:: Basic architecture of the Mach microkernel.
+* History:: The story about Mach.
+
+Installing
+
+* Binary Distributions:: Obtaining ready-to-run GNU distributions.
+* Compilation:: Building GNU Mach from its source code.
+* Configuration:: Configuration options at compilation time.
+* Cross-Compilation:: Building GNU Mach from another system.
+
+Bootstrap
+
+* Bootloader:: Starting the microkernel, or other OSes.
+* Modules:: Starting the first task of the OS.
+
+Inter Process Communication
+
+* Major Concepts:: The concepts behind the Mach IPC system.
+* Messaging Interface:: Composing, sending and receiving messages.
+* Port Manipulation Interface:: Manipulating ports, port rights, port sets.
+
+Messaging Interface
+
+* Mach Message Call:: Sending and receiving messages.
+* Message Format:: The format of Mach messages.
+* Exchanging Port Rights:: Sending and receiving port rights.
+* Memory:: Passing memory regions in messages.
+* Message Send:: Sending messages.
+* Message Receive:: Receiving messages.
+* Atomicity:: Atomicity of port rights.
+
+Port Manipulation Interface
+
+* Port Creation:: How to create new ports and port sets.
+* Port Destruction:: How to destroy ports and port sets.
+* Port Names:: How to query and manipulate port names.
+* Port Rights:: How to work with port rights.
+* Ports and other Tasks:: How to move rights between tasks.
+* Receive Rights:: How to work with receive rights.
+* Port Sets:: How to work with port sets.
+* Request Notifications:: How to request notifications for events.
+
+Virtual Memory Interface
+
+* Memory Allocation:: Allocation of new virtual memory.
+* Memory Deallocation:: Freeing unused virtual memory.
+* Data Transfer:: Reading, writing and copying memory.
+* Memory Attributes:: Tweaking memory regions.
+* Mapping Memory Objects:: How to map memory objects.
+* Memory Statistics:: How to get statistics about memory usage.
+
+External Memory Management
+
+* Memory Object Server:: The basics of external memory management.
+* Memory Object Creation:: How new memory objects are created.
+* Memory Object Termination:: How memory objects are terminated.
+* Memory Objects and Data:: Data transfer to and from memory objects.
+* Memory Object Locking:: How memory objects are locked.
+* Memory Object Attributes:: Manipulating attributes of memory objects.
+* Default Memory Manager:: Setting and using the default memory manager.
+
+Threads and Tasks
+
+* Thread Interface:: Manipulating threads.
+* Task Interface:: Manipulating tasks.
+* Profiling:: Profiling threads and tasks.
+
+Thread Interface
+
+* Thread Creation:: Creating threads.
+* Thread Termination:: Terminating threads.
+* Thread Information:: How to get informations on threads.
+* Thread Settings:: How to set threads related informations.
+* Thread Execution:: How to control the thread's machine state.
+* Scheduling:: Operations on thread scheduling.
+* Thread Special Ports:: How to handle the thread's special ports.
+* Exceptions:: Managing exceptions.
+
+Scheduling
+
+* Thread Priority:: Changing the priority of a thread.
+* Hand-Off Scheduling:: Switch to a new thread.
+* Scheduling Policy:: Setting the scheduling policy.
+
+Task Interface
+
+* Task Creation:: Creating tasks.
+* Task Termination:: Terminating tasks.
+* Task Information:: Informations on tasks.
+* Task Execution:: Thread scheduling in a task.
+* Task Special Ports:: How to get and set the task's special ports.
+* Syscall Emulation:: How to emulate system calls.
+
+Host Interface
+
+* Host Ports:: Ports representing a host.
+* Host Information:: Query information about a host.
+* Host Time:: Functions to query manipulate the host time.
+* Host Reboot:: Rebooting the system.
+
+Processors and Processor Sets
+
+* Processor Set Interface:: How to work with processor sets.
+* Processor Interface:: How to work with individual processors.
+
+Processor Set Interface
+
+* Processor Set Ports:: Ports representing a processor set.
+* Processor Set Access:: How the processor sets are accessed.
+* Processor Set Creation:: How new processor sets are created.
+* Processor Set Destruction:: How processor sets are destroyed.
+* Tasks and Threads on Sets:: Assigning tasks or threads to processor sets.
+* Processor Set Priority:: Specifying the priority of a processor set.
+* Processor Set Policy:: Changing the processor set policies.
+* Processor Set Info:: Obtaining information about a processor set.
+
+Processor Interface
+
+* Hosted Processors:: Getting a list of all processors on a host.
+* Processor Control:: Starting, stopping, controlling processors.
+* Processors and Sets:: Combining processors into processor sets.
+* Processor Info:: Obtaining information on processors.
+
+Device Interface
+
+* Device Open:: Opening hardware devices.
+* Device Close:: Closing hardware devices.
+* Device Read:: Reading data from the device.
+* Device Write:: Writing data to the device.
+* Device Map:: Mapping devices into virtual memory.
+* Device Status:: Querying and manipulating a device.
+* Device Filter:: Filtering packets arriving on a device.
+
+Kernel Debugger
+
+* Operation:: Basic architecture of the kernel debugger.
+* Commands:: Available commands in the kernel debugger.
+* Variables:: Access of variables from the kernel debugger.
+* Expressions:: Usage of expressions in the kernel debugger.
+
+Documentation License
+
+* Free Documentation License:: The GNU Free Documentation License.
+* CMU License:: The CMU license applies to the original Mach
+ kernel and its documentation.
+
+
+File: mach.info, Node: Introduction, Next: Installing, Prev: Top, Up: Top
+
+1 Introduction
+**************
+
+GNU Mach is the microkernel of the GNU Project. It is the base of the
+operating system, and provides its functionality to the Hurd servers,
+the GNU C Library and all user applications. The microkernel itself
+does not provide much functionality of the system, just enough to make
+it possible for the Hurd servers and the C library to implement the
+missing features you would expect from a POSIX compatible operating
+system.
+
+* Menu:
+
+* Audience:: The people for whom this manual is written.
+* Features:: Reasons to install and use GNU Mach.
+* Overview:: Basic architecture of the Mach microkernel.
+* History:: The story about Mach.
+
+
+File: mach.info, Node: Audience, Next: Features, Up: Introduction
+
+1.1 Audience
+============
+
+This manual is designed to be useful to everybody who is interested in
+using, administering, or programming the Mach microkernel.
+
+ If you are an end-user and you are looking for help on running the
+Mach kernel, the first few chapters of this manual describe the
+essential parts of installing and using the kernel in the GNU operating
+system.
+
+ The rest of this manual is a technical discussion of the Mach
+programming interface and its implementation, and would not be helpful
+until you want to learn how to extend the system or modify the kernel.
+
+ This manual is organized according to the subsystems of Mach, and
+each chapter begins with descriptions of conceptual ideas that are
+related to that subsystem. If you are a programmer and want to learn
+more about, say, the Mach IPC subsystem, you can skip to the IPC chapter
+(*note Inter Process Communication::), and read about the related
+concepts and interface definitions.
+
+
+File: mach.info, Node: Features, Next: Overview, Prev: Audience, Up: Introduction
+
+1.2 Features
+============
+
+GNU Mach is not the most advanced microkernel known to the planet, nor
+is it the fastest or smallest, but it has a rich set of interfaces and
+some features which make it useful as the base of the Hurd system.
+
+it's free software
+ Anybody can use, modify, and redistribute it under the terms of
+ the GNU General Public License (*note Copying::). GNU Mach is
+ part of the GNU system, which is a complete operating system
+ licensed under the GPL.
+
+it's built to survive
+ As a microkernel, GNU Mach doesn't implement a lot of the features
+ commonly found in an operating system, but only the bare minimum
+ that is required to implement a full operating system on top of it.
+ This means that a lot of the operating system code is maintained
+ outside of GNU Mach, and while this code may go through a complete
+ redesign, the code of the microkernel can remain comparatively
+ stable.
+
+it's scalable
+ Mach is particularly well suited for SMP and network cluster
+ techniques. Thread support is provided at the kernel level, and
+ the kernel itself takes advantage of that. Network transparency
+ at the IPC level makes resources of the system available across
+ machine boundaries (with NORMA IPC, currently not available in GNU
+ Mach).
+
+it exists
+ The Mach microkernel is real software that works Right Now. It is
+ not a research or a proposal. You don't have to wait at all
+ before you can start using and developing it. Mach has been used
+ in many operating systems in the past, usually as the base for a
+ single UNIX server. In the GNU system, Mach is the base of a
+ functional multi-server operating system, the Hurd.
+
+
+File: mach.info, Node: Overview, Next: History, Prev: Features, Up: Introduction
+
+1.3 Overview
+============
+
+An operating system kernel provides a framework for programs to share a
+computer's hardware resources securely and efficiently. This requires
+that the programs are seperated and protected from each other. To make
+running multiple programs in parallel useful, there also needs to be a
+facility for programs to exchange information by communication.
+
+ The Mach microkernel provides abstractions of the underlying hardware
+resources like devices and memory. It organizes the running programs
+into tasks and threads (points of execution in the tasks). In addition,
+Mach provides a rich interface for inter-process communication.
+
+ What Mach does not provide is a POSIX compatible programming
+interface. In fact, it has no understanding of file systems, POSIX
+process semantics, network protocols and many more. All this is
+implemented in tasks running on top of the microkernel. In the GNU
+operating system, the Hurd servers and the C library share the
+responsibility to implement the POSIX interface, and the additional
+interfaces which are specific to the GNU system.
+
+
+File: mach.info, Node: History, Prev: Overview, Up: Introduction
+
+1.4 History
+===========
+
+XXX A few lines about the history of Mach here.
+
+
+File: mach.info, Node: Installing, Next: Bootstrap, Prev: Introduction, Up: Top
+
+2 Installing
+************
+
+Before you can use the Mach microkernel in your system you'll need to
+install it and all components you want to use with it, e.g. the rest of
+the operating system. You also need a bootloader to load the kernel
+from the storage medium and run it when the computer is started.
+
+ GNU Mach is only available for Intel i386-compatible architectures
+(such as the Pentium) currently. If you have a different architecture
+and want to run the GNU Mach microkernel, you will need to port the
+kernel and all other software of the system to your machine's
+architecture. Porting is an involved process which requires
+considerable programming skills, and it is not recommended for the
+faint-of-heart. If you have the talent and desire to do a port, contact
+<bug-hurd@gnu.org> in order to coordinate the effort.
+
+* Menu:
+
+* Binary Distributions:: Obtaining ready-to-run GNU distributions.
+* Compilation:: Building GNU Mach from its source code.
+* Configuration:: Configuration options at compile time.
+* Cross-Compilation:: Building GNU Mach from another system.
+
+
+File: mach.info, Node: Binary Distributions, Next: Compilation, Up: Installing
+
+2.1 Binary Distributions
+========================
+
+By far the easiest and best way to install GNU Mach and the operating
+system is to obtain a GNU binary distribution. The GNU operating
+system consists of GNU Mach, the Hurd, the C library and many
+applications. Without the GNU operating system, you will only have a
+microkernel, which is not very useful by itself, without the other
+programs.
+
+ Building the whole operating system takes a huge effort, and you are
+well advised to not do it yourself, but to get a binary distribution of
+the GNU operating system. The distribution also includes a binary of
+the GNU Mach microkernel.
+
+ Information on how to obtain the GNU system can be found in the Hurd
+info manual.
+
+
+File: mach.info, Node: Compilation, Next: Configuration, Prev: Binary Distributions, Up: Installing
+
+2.2 Compilation
+===============
+
+If you already have a running GNU system, and only want to recompile
+the kernel, for example to select a different set of included hardware
+drivers, you can easily do this. You need the GNU C compiler and MiG,
+the Mach interface generator, which both come in their own packages.
+
+ Building and installing the kernel is as easy as with any other GNU
+software package. The configure script is used to configure the source
+and set the compile time options. The compilation is done by running:
+
+ make
+
+ To install the kernel and its header files, just enter the command:
+
+ make install
+
+ This will install the kernel into $(prefix)/boot/gnumach and the
+header files into $(prefix)/include. You can also only install the
+kernel or the header files. For this, the two targets install-kernel
+and install-headers are provided.
+
+
+File: mach.info, Node: Configuration, Next: Cross-Compilation, Prev: Compilation, Up: Installing
+
+2.3 Configuration
+=================
+
+The following options can be passed to the configure script as command
+line arguments and control what components are built into the kernel, or
+where it is installed.
+
+ The default for an option is to be disabled, unless otherwise noted.
+
+ This table is out-dated. Please see the file `i386/README-Drivers'
+and the output of `[GNU Mach]/configure --help=recursive'.
+
+`--prefix PREFIX'
+ Sets the prefix to PREFIX. The default prefix is the empty
+ string, which is the correct value for the GNU system. The prefix
+ is prepended to all file names at installation time.
+
+`--enable-kdb'
+ Enables the in-kernel debugger. This is only useful if you
+ actually anticipate debugging the kernel. It is not enabled by
+ default because it adds considerably to the unpageable memory
+ footprint of the kernel. *Note Kernel Debugger::.
+
+`--enable-kmsg'
+ Enables the kernel message device kmsg.
+
+`--enable-lpr'
+ Enables the parallel port devices lpr%d.
+
+`--enable-floppy'
+ Enables the PC floppy disk controller devices fd%d.
+
+`--enable-ide'
+ Enables the IDE controller devices hd%d, hd%ds%d.
+
+ The following options enable drivers for various SCSI controller.
+SCSI devices are named sd%d (disks) or cd%d (CD ROMs).
+
+`--enable-advansys'
+ Enables the AdvanSys SCSI controller devices sd%d, cd%d.
+
+`--enable-buslogic'
+ Enables the BusLogic SCSI controller devices sd%d, cd%d.
+
+`--disable-flashpoint'
+ Only meaningful in conjunction with `--enable-buslogic'. Omits the
+ FlshPoint support. This option is enabled by default if
+ `--enable-buslogic' is specified.
+
+`--enable-u1434f'
+ Enables the UltraStor 14F/34F SCSI controller devices sd%d, cd%d.
+
+`--enable-ultrastor'
+ Enables the UltraStor SCSI controller devices sd%d, cd%d.
+
+`--enable-aha152x'
+`--enable-aha2825'
+ Enables the Adaptec AHA-152x/2825 SCSI controller devices sd%d,
+ cd%d.
+
+`--enable-aha1542'
+ Enables the Adaptec AHA-1542 SCSI controller devices sd%d, cd%d.
+
+`--enable-aha1740'
+ Enables the Adaptec AHA-1740 SCSI controller devices sd%d, cd%d.
+
+`--enable-aic7xxx'
+ Enables the Adaptec AIC7xxx SCSI controller devices sd%d, cd%d.
+
+`--enable-futuredomain'
+ Enables the Future Domain 16xx SCSI controller devices sd%d, cd%d.
+
+`--enable-in2000'
+ Enables the Always IN 2000 SCSI controller devices sd%d, cd%d.
+
+`--enable-ncr5380'
+`--enable-ncr53c400'
+ Enables the generic NCR5380/53c400 SCSI controller devices sd%d,
+ cd%d.
+
+`--enable-ncr53c406a'
+ Enables the NCR53c406a SCSI controller devices sd%d, cd%d.
+
+`--enable-pas16'
+ Enables the PAS16 SCSI controller devices sd%d, cd%d.
+
+`--enable-seagate'
+ Enables the Seagate ST02 and Future Domain TMC-8xx SCSI controller
+ devices sd%d, cd%d.
+
+`--enable-t128'
+`--enable-t128f'
+`--enable-t228'
+ Enables the Trantor T128/T128F/T228 SCSI controller devices sd%d,
+ cd%d.
+
+`--enable-ncr53c7xx'
+ Enables the NCR53C7,8xx SCSI controller devices sd%d, cd%d.
+
+`--enable-eatadma'
+ Enables the EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti,
+ Alphatronix) SCSI controller devices sd%d, cd%d.
+
+`--enable-eatapio'
+ Enables the EATA-PIO (old DPT PM2001, PM2012A) SCSI controller
+ devices sd%d, cd%d.
+
+`--enable-wd7000'
+ Enables the WD 7000 SCSI controller devices sd%d, cd%d.
+
+`--enable-eata'
+ Enables the EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant
+ boards) SCSI controller devices sd%d, cd%d.
+
+`--enable-am53c974'
+`--enable-am79c974'
+ Enables the AM53/79C974 SCSI controller devices sd%d, cd%d.
+
+`--enable-dtc3280'
+`--enable-dtc3180'
+ Enables the DTC3180/3280 SCSI controller devices sd%d, cd%d.
+
+`--enable-ncr53c8xx'
+`--enable-dc390w'
+`--enable-dc390u'
+`--enable-dc390f'
+ Enables the NCR53C8XX SCSI controller devices sd%d, cd%d.
+
+`--enable-dc390t'
+`--enable-dc390'
+ Enables the Tekram DC-390(T) SCSI controller devices sd%d, cd%d.
+
+`--enable-ppa'
+ Enables the IOMEGA Parallel Port ZIP drive device sd%d.
+
+`--enable-qlogicfas'
+ Enables the Qlogic FAS SCSI controller devices sd%d, cd%d.
+
+`--enable-qlogicisp'
+ Enables the Qlogic ISP SCSI controller devices sd%d, cd%d.
+
+`--enable-gdth'
+ Enables the GDT SCSI Disk Array controller devices sd%d, cd%d.
+
+ The following options enable drivers for various ethernet cards.
+NIC device names are usually eth%d, except for the pocket adaptors.
+
+ GNU Mach does only autodetect one ethernet card. To enable any
+further cards, the source code has to be edited.
+
+`--enable-ne2000'
+`--enable-ne1000'
+ Enables the NE2000/NE1000 ISA netword card devices eth%d.
+
+`--enable-3c503'
+`--enable-el2'
+ Enables the 3Com 503 (Etherlink II) netword card devices eth%d.
+
+`--enable-3c509'
+`--enable-3c579'
+`--enable-el3'
+ Enables the 3Com 509/579 (Etherlink III) netword card devices
+ eth%d.
+
+`--enable-wd80x3'
+ Enables the WD80X3 netword card devices eth%d.
+
+`--enable-3c501'
+`--enable-el1'
+ Enables the 3COM 501 netword card devices eth%d.
+
+`--enable-ul'
+ Enables the SMC Ultra netword card devices eth%d.
+
+`--enable-ul32'
+ Enables the SMC Ultra 32 netword card devices eth%d.
+
+`--enable-hplanplus'
+ Enables the HP PCLAN+ (27247B and 27252A) netword card devices
+ eth%d.
+
+`--enable-hplan'
+ Enables the HP PCLAN (27245 and other 27xxx series) netword card
+ devices eth%d.
+
+`--enable-3c59x'
+`--enable-3c90x'
+`--enable-vortex'
+ Enables the 3Com 590/900 series (592/595/597/900/905)
+ "Vortex/Boomerang" netword card devices eth%d.
+
+`--enable-seeq8005'
+ Enables the Seeq8005 netword card devices eth%d.
+
+`--enable-hp100'
+`--enable-hpj2577'
+`--enable-hpj2573'
+`--enable-hp27248b'
+`--enable-hp2585'
+ Enables the HP 10/100VG PCLAN (ISA, EISA, PCI) netword card devices
+ eth%d.
+
+`--enable-ac3200'
+ Enables the Ansel Communications EISA 3200 netword card devices
+ eth%d.
+
+`--enable-e2100'
+ Enables the Cabletron E21xx netword card devices eth%d.
+
+`--enable-at1700'
+ Enables the AT1700 (Fujitsu 86965) netword card devices eth%d.
+
+`--enable-eth16i'
+`--enable-eth32'
+ Enables the ICL EtherTeam 16i/32 netword card devices eth%d.
+
+`--enable-znet'
+`--enable-znote'
+ Enables the Zenith Z-Note netword card devices eth%d.
+
+`--enable-eexpress'
+ Enables the EtherExpress 16 netword card devices eth%d.
+
+`--enable-eexpresspro'
+ Enables the EtherExpressPro netword card devices eth%d.
+
+`--enable-eexpresspro100'
+ Enables the Intel EtherExpressPro PCI 10+/100B/100+ netword card
+ devices eth%d.
+
+`--enable-depca'
+`--enable-de100'
+`--enable-de101'
+`--enable-de200'
+`--enable-de201'
+`--enable-de202'
+`--enable-de210'
+`--enable-de422'
+ Enables the DEPCA, DE10x, DE200, DE201, DE202, DE210, DE422
+ netword card devices eth%d.
+
+`--enable-ewrk3'
+`--enable-de203'
+`--enable-de204'
+`--enable-de205'
+ Enables the EtherWORKS 3 (DE203, DE204, DE205) netword card devices
+ eth%d.
+
+`--enable-de4x5'
+`--enable-de425'
+`--enable-de434'
+`--enable-435'
+`--enable-de450'
+`--enable-500'
+ Enables the DE425, DE434, DE435, DE450, DE500 netword card devices
+ eth%d.
+
+`--enable-apricot'
+ Enables the Apricot XEN-II on board ethernet netword card devices
+ eth%d.
+
+`--enable-wavelan'
+ Enables the AT&T WaveLAN & DEC RoamAbout DS netword card devices
+ eth%d.
+
+`--enable-3c507'
+`--enable-el16'
+ Enables the 3Com 507 netword card devices eth%d.
+
+`--enable-3c505'
+`--enable-elplus'
+ Enables the 3Com 505 netword card devices eth%d.
+
+`--enable-de600'
+ Enables the D-Link DE-600 netword card devices eth%d.
+
+`--enable-de620'
+ Enables the D-Link DE-620 netword card devices eth%d.
+
+`--enable-skg16'
+ Enables the Schneider & Koch G16 netword card devices eth%d.
+
+`--enable-ni52'
+ Enables the NI5210 netword card devices eth%d.
+
+`--enable-ni65'
+ Enables the NI6510 netword card devices eth%d.
+
+`--enable-atp'
+ Enables the AT-LAN-TEC/RealTek pocket adaptor netword card devices
+ atp%d.
+
+`--enable-lance'
+`--enable-at1500'
+`--enable-ne2100'
+ Enables the AMD LANCE and PCnet (AT1500 and NE2100) netword card
+ devices eth%d.
+
+`--enable-elcp'
+`--enable-tulip'
+ Enables the DECchip Tulip (dc21x4x) PCI netword card devices eth%d.
+
+`--enable-fmv18x'
+ Enables the FMV-181/182/183/184 netword card devices eth%d.
+
+`--enable-3c515'
+ Enables the 3Com 515 ISA Fast EtherLink netword card devices eth%d.
+
+`--enable-pcnet32'
+ Enables the AMD PCI PCnet32 (PCI bus NE2100 cards) netword card
+ devices eth%d.
+
+`--enable-ne2kpci'
+ Enables the PCI NE2000 netword card devices eth%d.
+
+`--enable-yellowfin'
+ Enables the Packet Engines Yellowfin Gigabit-NIC netword card
+ devices eth%d.
+
+`--enable-rtl8139'
+`--enable-rtl8129'
+ Enables the RealTek 8129/8139 (not 8019/8029!) netword card
+ devices eth%d.
+
+`--enable-epic'
+`--enable-epic100'
+ Enables the SMC 83c170/175 EPIC/100 (EtherPower II) netword card
+ devices eth%d.
+
+`--enable-tlan'
+ Enables the TI ThunderLAN netword card devices eth%d.
+
+`--enable-viarhine'
+ Enables the VIA Rhine netword card devices eth%d.
+
+`--enable-hamachi'
+ Enables the Packet Engines "Hamachi" GNIC-2 Gigabit Ethernet
+ devices eth%d.
+
+`--enable-intel-gige'
+ Enables the Intel PCI Gigabit Ethernet devices eth%d.
+
+`--enable-myson803'
+ Enables the Myson MTD803 Ethernet adapter series devices eth%d.
+
+`--enable-natsemi'
+ Enables the National Semiconductor DP8381x series PCI Ethernet
+ devices eth%d.
+
+`--enable-ns820'
+ Enables the National Semiconductor DP8382x series PCI Ethernet
+ devices eth%d.
+
+`--enable-starfire'
+ Enables the Adaptec Starfire network adapter devices eth%d.
+
+`--enable-sundance'
+ Enables the Sundance ST201 "Alta" PCI Ethernet devices eth%d.
+
+`--enable-winbond-840'
+ Enables the Winbond W89c840 PCI Ethernet devices eth%d.
+
+ The following options either enable drivers for supported PCMCIA
+bridges or control the overall behaviour of the GNU Mach PCMCIA core.
+To make use of GNU Mach PCMCIA support you need to have the
+corresponding userland applications (GNU Mach Card Services) installed.
+
+`--enable-i82365'
+ Enables the driver for the Intel 82365 and compatible PC Card
+ controllers, and Yenta-compatible PCI-to-CardBus controllers.
+
+`--enable-pcmcia-isa'
+ Enables ISA-bus related bits in the GNU Mach PCMCIA core. This is
+ generally a good idea, since it does not only have effect if your
+ PC Card bridge is attached to the ISA bus, but provides more (ISA)
+ interrupts to the Card Services for it to assign to the cards in
+ turn.
+
+ The following options enable drivers for supported PCMCIA Ethernet
+controllers. NIC device names are usually eth%d.
+
+`--enable-3c574_cs'
+ Enables the PCMCIA ethernet driver for the 3Com 3c574 "RoadRunner".
+
+`--enable-3c589_cs'
+ Enables the driver for the 3Com 3c589 PCMCIA card.
+
+`--enable-axnet_cs'
+ Enables the driver for the Asix AX88190-based PCMCIA cards.
+
+`--enable-fmvj18x_cs'
+ Enables the driver for PCMCIA cards with the fmvj18x chipset.
+
+`--enable-nmclan_cs'
+ Enables the driver for the New Media Ethernet LAN PCMCIA cards.
+
+`--enable-pcnet_cs'
+ Enables the driver for NS8390-based PCMCIA cards.
+
+ This driver supports the D-Link DE-650 and Linksys EthernetCard
+ cards, the newer D-Link and Linksys combo cards, Accton EN2212
+ cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory
+ mode, and the IBM Credit Card Adapter, the NE4100, the Thomas
+ Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory
+ mode. It will also handle the Socket EA card in either mode.
+
+`--enable-smc91c92_cs'
+ Enables the driver for SMC91c92-based PCMCIA cards.
+
+`--enable-xirc2ps_cs'
+ Enables the driver for Xircom CreditCard and Realport PCMCIA
+ ethernet adapters.
+
+ The following options enable drivers for supported PCMCIA Wireless
+LAN network controllers. NIC device names are usually eth%d.
+
+ Please mind, that you need to have some userland applications (the
+GNU Mach Wireless Tools) installed, in order to make use of these
+devices.
+
+`--enable-orinoco_cs'
+ Enables the driver for the Hermes or Prism 2 chipset based PCMCIA
+ wireless adapters, with Lucent/Agere, Intersil or Symbol firmware.
+
+ This driver is suitable for PCMCIA wireless adapters, such as the
+ Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/EnteraSys
+ RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). It
+ should also be usable on various Prism II based cards such as the
+ Linksys, D-Link and Farallon Skyline. It should also work on Symbol
+ cards such as the 3Com AirConnect and Ericsson WLAN.
+
+
+File: mach.info, Node: Cross-Compilation, Prev: Configuration, Up: Installing
+
+2.4 Cross-Compilation
+=====================
+
+Another way to install the kernel is to use an existing operating system
+in order to compile the kernel binary. This is called
+"cross-compiling", because it is done between two different platforms.
+If the pre-built kernels are not working for you, and you can't ask
+someone to compile a custom kernel for your machine, this is your last
+chance to get a kernel that boots on your hardware.
+
+ Luckily, the kernel does have light dependencies. You don't even
+need a cross compiler if your build machine has a compiler and is the
+same architecture as the system you want to run GNU Mach on.
+
+ You need a cross-mig, though.
+
+ XXX More info needed.
+
+
+File: mach.info, Node: Bootstrap, Next: Inter Process Communication, Prev: Installing, Up: Top
+
+3 Bootstrap
+***********
+
+Bootstrapping(1) is the procedure by which your machine loads the
+microkernel and transfers control to the operating system.
+
+* Menu:
+
+* Bootloader:: Starting the microkernel, or other OSes.
+* Modules:: Starting the first task of the OS.
+
+ ---------- Footnotes ----------
+
+ (1) The term "bootstrapping" refers to a Dutch legend about a boy
+who was able to fly by pulling himself up by his bootstraps. In
+computers, this term refers to any process where a simple system
+activates a more complicated system.
+
+
+File: mach.info, Node: Bootloader, Next: Modules, Up: Bootstrap
+
+3.1 Bootloader
+==============
+
+The "bootloader" is the first software that runs on your machine. Many
+hardware architectures have a very simple startup routine which reads a
+very simple bootloader from the beginning of the internal hard disk,
+then transfers control to it. Other architectures have startup
+routines which are able to understand more of the contents of the hard
+disk, and directly start a more advanced bootloader.
+
+ Currently, "GRUB"(1) is the preferred GNU bootloader. GRUB provides
+advanced functionality, and is capable of loading several different
+kernels (such as Mach, Linux, DOS, and the *BSD family). *Note
+Introduction: (grub)Top.
+
+ GNU Mach conforms to the Multiboot specification which defines an
+interface between the bootloader and the components that run very early
+at startup. GNU Mach can be started by any bootloader which supports
+the multiboot standard. After the bootloader loaded the kernel image to
+a designated address in the system memory, it jumps into the startup
+code of the kernel. This code initializes the kernel and detects the
+available hardware devices. Afterwards, the first system task is
+started. *Note Overview: (multiboot)Top.
+
+ ---------- Footnotes ----------
+
+ (1) The GRand Unified Bootloader, available from
+`http://www.uruk.org/grub/'.
+
+
+File: mach.info, Node: Modules, Prev: Bootloader, Up: Bootstrap
+
+3.2 Modules
+===========
+
+Because the microkernel does not provide filesystem support and other
+features necessary to load the first system task from a storage medium,
+the first task is loaded by the bootloader as a module to a specified
+address. In the GNU system, this first program is the `serverboot'
+executable. GNU Mach inserts the host control port and the device
+master port into this task and appends the port numbers to the command
+line before executing it.
+
+ The `serverboot' program is responsible for loading and executing
+the rest of the Hurd servers. Rather than containing specific
+instructions for starting the Hurd, it follows general steps given in a
+user-supplied boot script.
+
+ XXX More about boot scripts.
+
+
+File: mach.info, Node: Inter Process Communication, Next: Virtual Memory Interface, Prev: Bootstrap, Up: Top
+
+4 Inter Process Communication
+*****************************
+
+This chapter describes the details of the Mach IPC system. First the
+actual calls concerned with sending and receiving messages are
+discussed, then the details of the port system are described in detail.
+
+* Menu:
+
+* Major Concepts:: The concepts behind the Mach IPC system.
+* Messaging Interface:: Composing, sending and receiving messages.
+* Port Manipulation Interface:: Manipulating ports, port rights, port sets.
+
+
+File: mach.info, Node: Major Concepts, Next: Messaging Interface, Up: Inter Process Communication
+
+4.1 Major Concepts
+==================
+
+The Mach kernel provides message-oriented, capability-based interprocess
+communication. The interprocess communication (IPC) primitives
+efficiently support many different styles of interaction, including
+remote procedure calls (RPC), object-oriented distributed programming,
+streaming of data, and sending very large amounts of data.
+
+ The IPC primitives operate on three abstractions: messages, ports,
+and port sets. User tasks access all other kernel services and
+abstractions via the IPC primitives.
+
+ The message primitives let tasks send and receive messages. Tasks
+send messages to ports. Messages sent to a port are delivered reliably
+(messages may not be lost) and are received in the order in which they
+were sent. Messages contain a fixed-size header and a variable amount
+of typed data following the header. The header describes the
+destination and size of the message.
+
+ The IPC implementation makes use of the VM system to efficiently
+transfer large amounts of data. The message body can contain the
+address of a region in the sender's address space which should be
+transferred as part of the message. When a task receives a message
+containing an out-of-line region of data, the data appears in an unused
+portion of the receiver's address space. This transmission of
+out-of-line data is optimized so that sender and receiver share the
+physical pages of data copy-on-write, and no actual data copy occurs
+unless the pages are written. Regions of memory up to the size of a
+full address space may be sent in this manner.
+
+ Ports hold a queue of messages. Tasks operate on a port to send and
+receive messages by exercising capabilities for the port. Multiple
+tasks can hold send capabilities, or rights, for a port. Tasks can also
+hold send-once rights, which grant the ability to send a single message.
+Only one task can hold the receive capability, or receive right, for a
+port. Port rights can be transferred between tasks via messages. The
+sender of a message can specify in the message body that the message
+contains a port right. If a message contains a receive right for a
+port, then the receive right is removed from the sender of the message
+and the right is transferred to the receiver of the message. While the
+receive right is in transit, tasks holding send rights can still send
+messages to the port, and they are queued until a task acquires the
+receive right and uses it to receive the messages.
+
+ Tasks can receive messages from ports and port sets. The port set
+abstraction allows a single thread to wait for a message from any of
+several ports. Tasks manipulate port sets with a capability, or
+port-set right, which is taken from the same space as the port
+capabilities. The port-set right may not be transferred in a message.
+A port set holds receive rights, and a receive operation on a port set
+blocks waiting for a message sent to any of the constituent ports. A
+port may not belong to more than one port set, and if a port is a member
+of a port set, the holder of the receive right can't receive directly
+from the port.
+
+ Port rights are a secure, location-independent way of naming ports.
+The port queue is a protected data structure, only accessible via the
+kernel's exported message primitives. Rights are also protected by the
+kernel; there is no way for a malicious user task to guess a port name
+and send a message to a port to which it shouldn't have access. Port
+rights do not carry any location information. When a receive right for
+a port moves from task to task, and even between tasks on different
+machines, the send rights for the port remain unchanged and continue to
+function.
+
+
+File: mach.info, Node: Messaging Interface, Next: Port Manipulation Interface, Prev: Major Concepts, Up: Inter Process Communication
+
+4.2 Messaging Interface
+=======================
+
+This section describes how messages are composed, sent and received
+within the Mach IPC system.
+
+* Menu:
+
+* Mach Message Call:: Sending and receiving messages.
+* Message Format:: The format of Mach messages.
+* Exchanging Port Rights:: Sending and receiving port rights.
+* Memory:: Passing memory regions in messages.
+* Message Send:: Sending messages.
+* Message Receive:: Receiving messages.
+* Atomicity:: Atomicity of port rights.
+
+
+File: mach.info, Node: Mach Message Call, Next: Message Format, Up: Messaging Interface
+
+4.2.1 Mach Message Call
+-----------------------
+
+To use the `mach_msg' call, you can include the header files
+`mach/port.h' and `mach/message.h'.
+
+ -- Function: mach_msg_return_t mach_msg (mach_msg_header_t *MSG,
+ mach_msg_option_t OPTION, mach_msg_size_t SEND_SIZE,
+ mach_msg_size_t RCV_SIZE, mach_port_t RCV_NAME,
+ mach_msg_timeout_t TIMEOUT, mach_port_t NOTIFY)
+ The `mach_msg' function is used to send and receive messages. Mach
+ messages contain typed data, which can include port rights and
+ references to large regions of memory.
+
+ MSG is the address of a buffer in the caller's address space.
+ Message buffers should be aligned on long-word boundaries. The
+ message options OPTION are bit values, combined with bitwise-or.
+ One or both of `MACH_SEND_MSG' and `MACH_RCV_MSG' should be used.
+ Other options act as modifiers. When sending a message, SEND_SIZE
+ specifies the size of the message buffer. Otherwise zero should be
+ supplied. When receiving a message, RCV_SIZE specifies the size
+ of the message buffer. Otherwise zero should be supplied. When
+ receiving a message, RCV_NAME specifies the port or port set.
+ Otherwise `MACH_PORT_NULL' should be supplied. When using the
+ `MACH_SEND_TIMEOUT' and `MACH_RCV_TIMEOUT' options, TIMEOUT
+ specifies the time in milliseconds to wait before giving up.
+ Otherwise `MACH_MSG_TIMEOUT_NONE' should be supplied. When using
+ the `MACH_SEND_NOTIFY', `MACH_SEND_CANCEL', and `MACH_RCV_NOTIFY'
+ options, NOTIFY specifies the port used for the notification.
+ Otherwise `MACH_PORT_NULL' should be supplied.
+
+ If the option argument is `MACH_SEND_MSG', it sends a message. The
+ SEND_SIZE argument specifies the size of the message to send. The
+ `msgh_remote_port' field of the message header specifies the
+ destination of the message.
+
+ If the option argument is `MACH_RCV_MSG', it receives a message.
+ The RCV_SIZE argument specifies the size of the message buffer
+ that will receive the message; messages larger than RCV_SIZE are
+ not received. The RCV_NAME argument specifies the port or port
+ set from which to receive.
+
+ If the option argument is `MACH_SEND_MSG|MACH_RCV_MSG', then
+ `mach_msg' does both send and receive operations. If the send
+ operation encounters an error (any return code other than
+ `MACH_MSG_SUCCESS'), then the call returns immediately without
+ attempting the receive operation. Semantically the combined call
+ is equivalent to separate send and receive calls, but it saves a
+ system call and enables other internal optimizations.
+
+ If the option argument specifies neither `MACH_SEND_MSG' nor
+ `MACH_RCV_MSG', then `mach_msg' does nothing.
+
+ Some options, like `MACH_SEND_TIMEOUT' and `MACH_RCV_TIMEOUT',
+ share a supporting argument. If these options are used together,
+ they make independent use of the supporting argument's value.
+
+ -- Data type: mach_msg_timeout_t
+ This is a `natural_t' used by the timeout mechanism. The units are
+ milliseconds. The value to be used when there is no timeout is
+ `MACH_MSG_TIMEOUT_NONE'.
+
+
+File: mach.info, Node: Message Format, Next: Exchanging Port Rights, Prev: Mach Message Call, Up: Messaging Interface
+
+4.2.2 Message Format
+--------------------
+
+A Mach message consists of a fixed size message header, a
+`mach_msg_header_t', followed by zero or more data items. Data items
+are typed. Each item has a type descriptor followed by the actual data
+(or the address of the data, for out-of-line memory regions).
+
+ The following data types are related to Mach ports:
+
+ -- Data type: mach_port_t
+ The `mach_port_t' data type is an unsigned integer type which
+ represents a port name in the task's port name space. In GNU
+ Mach, this is an `unsigned int'.
+
+ The following data types are related to Mach messages:
+
+ -- Data type: mach_msg_bits_t
+ The `mach_msg_bits_t' data type is an `unsigned int' used to store
+ various flags for a message.
+
+ -- Data type: mach_msg_size_t
+ The `mach_msg_size_t' data type is an `unsigned int' used to store
+ the size of a message.
+
+ -- Data type: mach_msg_id_t
+ The `mach_msg_id_t' data type is an `integer_t' typically used to
+ convey a function or operation id for the receiver.
+
+ -- Data type: mach_msg_header_t
+ This structure is the start of every message in the Mach IPC
+ system. It has the following members:
+
+ `mach_msg_bits_t msgh_bits'
+ The `msgh_bits' field has the following bits defined, all
+ other bits should be zero:
+
+ `MACH_MSGH_BITS_REMOTE_MASK'
+ `MACH_MSGH_BITS_LOCAL_MASK'
+ The remote and local bits encode `mach_msg_type_name_t'
+ values that specify the port rights in the
+ `msgh_remote_port' and `msgh_local_port' fields. The
+ remote value must specify a send or send-once right for
+ the destination of the message. If the local value
+ doesn't specify a send or send-once right for the
+ message's reply port, it must be zero and
+ msgh_local_port must be `MACH_PORT_NULL'.
+
+ `MACH_MSGH_BITS_COMPLEX'
+ The complex bit must be specified if the message body
+ contains port rights or out-of-line memory regions. If
+ it is not specified, then the message body carries no
+ port rights or memory, no matter what the type
+ descriptors may seem to indicate.
+
+ `MACH_MSGH_BITS_REMOTE' and `MACH_MSGH_BITS_LOCAL' macros
+ return the appropriate `mach_msg_type_name_t' values, given a
+ `msgh_bits' value. The `MACH_MSGH_BITS' macro constructs a
+ value for `msgh_bits', given two `mach_msg_type_name_t'
+ values.
+
+ `mach_msg_size_t msgh_size'
+ The `msgh_size' field in the header of a received message
+ contains the message's size. The message size, a byte
+ quantity, includes the message header, type descriptors, and
+ in-line data. For out-of-line memory regions, the message
+ size includes the size of the in-line address, not the size
+ of the actual memory region. There are no arbitrary limits
+ on the size of a Mach message, the number of data items in a
+ message, or the size of the data items.
+
+ `mach_port_t msgh_remote_port'
+ The `msgh_remote_port' field specifies the destination port
+ of the message. The field must carry a legitimate send or
+ send-once right for a port.
+
+ `mach_port_t msgh_local_port'
+ The `msgh_local_port' field specifies an auxiliary port right,
+ which is conventionally used as a reply port by the recipient
+ of the message. The field must carry a send right, a
+ send-once right, `MACH_PORT_NULL', or `MACH_PORT_DEAD'.
+
+ `mach_port_seqno_t msgh_seqno'
+ The `msgh_seqno' field provides a sequence number for the
+ message. It is only valid in received messages; its value in
+ sent messages is overwritten.
+
+ `mach_msg_id_t msgh_id'
+ The `mach_msg' call doesn't use the `msgh_id' field, but it
+ conventionally conveys an operation or function id.
+
+ -- Macro: mach_msg_bits_t MACH_MSGH_BITS (mach_msg_type_name_t REMOTE,
+ mach_msg_type_name_t LOCAL)
+ This macro composes two `mach_msg_type_name_t' values that specify
+ the port rights in the `msgh_remote_port' and `msgh_local_port'
+ fields of a `mach_msg' call into an appropriate `mach_msg_bits_t'
+ value.
+
+ -- Macro: mach_msg_type_name_t MACH_MSGH_BITS_REMOTE
+ (mach_msg_bits_t BITS)
+ This macro extracts the `mach_msg_type_name_t' value for the remote
+ port right in a `mach_msg_bits_t' value.
+
+ -- Macro: mach_msg_type_name_t MACH_MSGH_BITS_LOCAL
+ (mach_msg_bits_t BITS)
+ This macro extracts the `mach_msg_type_name_t' value for the local
+ port right in a `mach_msg_bits_t' value.
+
+ -- Macro: mach_msg_bits_t MACH_MSGH_BITS_PORTS (mach_msg_bits_t BITS)
+ This macro extracts the `mach_msg_bits_t' component consisting of
+ the `mach_msg_type_name_t' values for the remote and local port
+ right in a `mach_msg_bits_t' value.
+
+ -- Macro: mach_msg_bits_t MACH_MSGH_BITS_OTHER (mach_msg_bits_t BITS)
+ This macro extracts the `mach_msg_bits_t' component consisting of
+ everything except the `mach_msg_type_name_t' values for the remote
+ and local port right in a `mach_msg_bits_t' value.
+
+ Each data item has a type descriptor, a `mach_msg_type_t' or a
+`mach_msg_type_long_t'. The `mach_msg_type_long_t' type descriptor
+allows larger values for some fields. The `msgtl_header' field in the
+long descriptor is only used for its inline, longform, and deallocate
+bits.
+
+ -- Data type: mach_msg_type_name_t
+ This is an `unsigned int' and can be used to hold the `msgt_name'
+ component of the `mach_msg_type_t' and `mach_msg_type_long_t'
+ structure.
+
+ -- Data type: mach_msg_type_size_t
+ This is an `unsigned int' and can be used to hold the `msgt_size'
+ component of the `mach_msg_type_t' and `mach_msg_type_long_t'
+ structure.
+
+ -- Data type: mach_msg_type_number_t
+ This is an `natural_t' and can be used to hold the `msgt_number'
+ component of the `mach_msg_type_t' and `mach_msg_type_long_t'
+ structure.
+
+ -- Data type: mach_msg_type_t
+ This structure has the following members:
+
+ `unsigned int msgt_name : 8'
+ The `msgt_name' field specifies the data's type. The
+ following types are predefined:
+
+ `MACH_MSG_TYPE_UNSTRUCTURED'
+
+ `MACH_MSG_TYPE_BIT'
+
+ `MACH_MSG_TYPE_BOOLEAN'
+
+ `MACH_MSG_TYPE_INTEGER_16'
+
+ `MACH_MSG_TYPE_INTEGER_32'
+
+ `MACH_MSG_TYPE_CHAR'
+
+ `MACH_MSG_TYPE_BYTE'
+
+ `MACH_MSG_TYPE_INTEGER_8'
+
+ `MACH_MSG_TYPE_REAL'
+
+ `MACH_MSG_TYPE_STRING'
+
+ `MACH_MSG_TYPE_STRING_C'
+
+ `MACH_MSG_TYPE_PORT_NAME'
+
+ The following predefined types specify port rights, and
+ receive special treatment. The next section discusses these
+ types in detail. The type `MACH_MSG_TYPE_PORT_NAME'
+ describes port right names, when no rights are being
+ transferred, but just names. For this purpose, it should be
+ used in preference to `MACH_MSG_TYPE_INTEGER_32'.
+
+ `MACH_MSG_TYPE_MOVE_RECEIVE'
+
+ `MACH_MSG_TYPE_MOVE_SEND'
+
+ `MACH_MSG_TYPE_MOVE_SEND_ONCE'
+
+ `MACH_MSG_TYPE_COPY_SEND'
+
+ `MACH_MSG_TYPE_MAKE_SEND'
+
+ `MACH_MSG_TYPE_MAKE_SEND_ONCE'
+
+ `msgt_size : 8'
+ The `msgt_size' field specifies the size of each datum, in
+ bits. For example, the msgt_size of
+ `MACH_MSG_TYPE_INTEGER_32' data is 32.
+
+ `msgt_number : 12'
+ The `msgt_number' field specifies how many data elements
+ comprise the data item. Zero is a legitimate number.
+
+ The total length specified by a type descriptor is
+ `(msgt_size * msgt_number)', rounded up to an integral number
+ of bytes. In-line data is then padded to an integral number
+ of long-words. This ensures that type descriptors always
+ start on long-word boundaries. It implies that message sizes
+ are always an integral multiple of a long-word's size.
+
+ `msgt_inline : 1'
+ The `msgt_inline' bit specifies, when `FALSE', that the data
+ actually resides in an out-of-line region. The address of
+ the memory region (a `vm_offset_t' or `vm_address_t') follows
+ the type descriptor in the message body. The `msgt_name',
+ `msgt_size', and `msgt_number' fields describe the memory
+ region, not the address.
+
+ `msgt_longform : 1'
+ The `msgt_longform' bit specifies, when `TRUE', that this type
+ descriptor is a `mach_msg_type_long_t' instead of a
+ `mach_msg_type_t'. The `msgt_name', `msgt_size', and
+ `msgt_number' fields should be zero. Instead, `mach_msg' uses
+ the following `msgtl_name', `msgtl_size', and `msgtl_number'
+ fields.
+
+ `msgt_deallocate : 1'
+ The `msgt_deallocate' bit is used with out-of-line regions.
+ When `TRUE', it specifies that the memory region should be
+ deallocated from the sender's address space (as if with
+ `vm_deallocate') when the message is sent.
+
+ `msgt_unused : 1'
+ The `msgt_unused' bit should be zero.
+
+ -- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY (mach_msg_type_name_t type)
+ This macro returns `TRUE' if the given type name specifies a port
+ type, otherwise it returns `FALSE'.
+
+ -- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY_SEND (mach_msg_type_name_t
+ type)
+ This macro returns `TRUE' if the given type name specifies a port
+ type with a send or send-once right, otherwise it returns `FALSE'.
+
+ -- Macro: boolean_t MACH_MSG_TYPE_PORT_ANY_RIGHT (mach_msg_type_name_t
+ type)
+ This macro returns `TRUE' if the given type name specifies a port
+ right type which is moved, otherwise it returns `FALSE'.
+
+ -- Data type: mach_msg_type_long_t
+ This structure has the following members:
+
+ `mach_msg_type_t msgtl_header'
+ Same meaning as `msgt_header'.
+
+ `unsigned short msgtl_name'
+ Same meaning as `msgt_name'.
+
+ `unsigned short msgtl_size'
+ Same meaning as `msgt_size'.
+
+ `unsigned int msgtl_number'
+ Same meaning as `msgt_number'.
+
+
+File: mach.info, Node: Exchanging Port Rights, Next: Memory, Prev: Message Format, Up: Messaging Interface
+
+4.2.3 Exchanging Port Rights
+----------------------------
+
+Each task has its own space of port rights. Port rights are named with
+positive integers. Except for the reserved values
+`MACH_PORT_NULL (0)'(1) and `MACH_PORT_DEAD (~0)', this is a full 32-bit
+name space. When the kernel chooses a name for a new right, it is free
+to pick any unused name (one which denotes no right) in the space.
+
+ There are five basic kinds of rights: receive rights, send rights,
+send-once rights, port-set rights, and dead names. Dead names are not
+capabilities. They act as place-holders to prevent a name from being
+otherwise used.
+
+ A port is destroyed, or dies, when its receive right is deallocated.
+When a port dies, send and send-once rights for the port turn into dead
+names. Any messages queued at the port are destroyed, which deallocates
+the port rights and out-of-line memory in the messages.
+
+ Tasks may hold multiple user-references for send rights and dead
+names. When a task receives a send right which it already holds, the
+kernel increments the right's user-reference count. When a task
+deallocates a send right, the kernel decrements its user-reference
+count, and the task only loses the send right when the count goes to
+zero.
+
+ Send-once rights always have a user-reference count of one, although
+a port can have multiple send-once rights, because each send-once right
+held by a task has a different name. In contrast, when a task holds
+send rights or a receive right for a port, the rights share a single
+name.
+
+ A message body can carry port rights; the `msgt_name' (`msgtl_name')
+field in a type descriptor specifies the type of port right and how the
+port right is to be extracted from the caller. The values
+`MACH_PORT_NULL' and `MACH_PORT_DEAD' are always valid in place of a
+port right in a message body. In a sent message, the following
+`msgt_name' values denote port rights:
+
+`MACH_MSG_TYPE_MAKE_SEND'
+ The message will carry a send right, but the caller must supply a
+ receive right. The send right is created from the receive right,
+ and the receive right's make-send count is incremented.
+
+`MACH_MSG_TYPE_COPY_SEND'
+ The message will carry a send right, and the caller should supply
+ a send right. The user reference count for the supplied send
+ right is not changed. The caller may also supply a dead name and
+ the receiving task will get `MACH_PORT_DEAD'.
+
+`MACH_MSG_TYPE_MOVE_SEND'
+ The message will carry a send right, and the caller should supply
+ a send right. The user reference count for the supplied send
+ right is decremented, and the right is destroyed if the count
+ becomes zero. Unless a receive right remains, the name becomes
+ available for recycling. The caller may also supply a dead name,
+ which loses a user reference, and the receiving task will get
+ `MACH_PORT_DEAD'.
+
+`MACH_MSG_TYPE_MAKE_SEND_ONCE'
+ The message will carry a send-once right, but the caller must
+ supply a receive right. The send-once right is created from the
+ receive right.
+
+`MACH_MSG_TYPE_MOVE_SEND_ONCE'
+ The message will carry a send-once right, and the caller should
+ supply a send-once right. The caller loses the supplied send-once
+ right. The caller may also supply a dead name, which loses a user
+ reference, and the receiving task will get `MACH_PORT_DEAD'.
+
+`MACH_MSG_TYPE_MOVE_RECEIVE'
+ The message will carry a receive right, and the caller should
+ supply a receive right. The caller loses the supplied receive
+ right, but retains any send rights with the same name.
+
+ If a message carries a send or send-once right, and the port dies
+while the message is in transit, then the receiving task will get
+`MACH_PORT_DEAD' instead of a right. The following `msgt_name' values
+in a received message indicate that it carries port rights:
+
+`MACH_MSG_TYPE_PORT_SEND'
+ This name is an alias for `MACH_MSG_TYPE_MOVE_SEND'. The message
+ carried a send right. If the receiving task already has send
+ and/or receive rights for the port, then that name for the port
+ will be reused. Otherwise, the new right will have a new name.
+ If the task already has send rights, it gains a user reference for
+ the right (unless this would cause the user-reference count to
+ overflow). Otherwise, it acquires the send right, with a
+ user-reference count of one.
+
+`MACH_MSG_TYPE_PORT_SEND_ONCE'
+ This name is an alias for `MACH_MSG_TYPE_MOVE_SEND_ONCE'. The
+ message carried a send-once right. The right will have a new name.
+
+`MACH_MSG_TYPE_PORT_RECEIVE'
+ This name is an alias for `MACH_MSG_TYPE_MOVE_RECEIVE'. The
+ message carried a receive right. If the receiving task already
+ has send rights for the port, then that name for the port will be
+ reused. Otherwise, the right will have a new name. The make-send
+ count of the receive right is reset to zero, but the port retains
+ other attributes like queued messages, extant send and send-once
+ rights, and requests for port-destroyed and no-senders
+ notifications.
+
+ When the kernel chooses a new name for a port right, it can choose
+any name, other than `MACH_PORT_NULL' and `MACH_PORT_DEAD', which is
+not currently being used for a port right or dead name. It might
+choose a name which at some previous time denoted a port right, but is
+currently unused.
+
+ ---------- Footnotes ----------
+
+ (1) In the Hurd system, we don't make the assumption that
+`MACH_PORT_NULL' is zero and evaluates to false, but rather compare
+port names to `MACH_PORT_NULL' explicitely
+
+
+File: mach.info, Node: Memory, Next: Message Send, Prev: Exchanging Port Rights, Up: Messaging Interface
+
+4.2.4 Memory
+------------
+
+A message body can contain the address of a region in the sender's
+address space which should be transferred as part of the message. The
+message carries a logical copy of the memory, but the kernel uses VM
+techniques to defer any actual page copies. Unless the sender or the
+receiver modifies the data, the physical pages remain shared.
+
+ An out-of-line transfer occurs when the data's type descriptor
+specifies `msgt_inline' as `FALSE'. The address of the memory region (a
+`vm_offset_t' or `vm_address_t') should follow the type descriptor in
+the message body. The type descriptor and the address contribute to
+the message's size (`send_size', `msgh_size'). The out-of-line data
+does not contribute to the message's size.
+
+ The name, size, and number fields in the type descriptor describe the
+type and length of the out-of-line data, not the in-line address.
+Out-of-line memory frequently requires long type descriptors
+(`mach_msg_type_long_t'), because the `msgt_number' field is too small
+to describe a page of 4K bytes.
+
+ Out-of-line memory arrives somewhere in the receiver's address space
+as new memory. It has the same inheritance and protection attributes as
+newly `vm_allocate''d memory. The receiver has the responsibility of
+deallocating (with `vm_deallocate') the memory when it is no longer
+needed. Security-conscious receivers should exercise caution when
+using out-of-line memory from untrustworthy sources, because the memory
+may be backed by an unreliable memory manager.
+
+ Null out-of-line memory is legal. If the out-of-line region size is
+zero (for example, because `msgtl_number' is zero), then the region's
+specified address is ignored. A received null out-of-line memory
+region always has a zero address.
+
+ Unaligned addresses and region sizes that are not page multiples are
+legal. A received message can also contain memory with unaligned
+addresses and funny sizes. In the general case, the first and last
+pages in the new memory region in the receiver do not contain only data
+from the sender, but are partly zero.(1) The received address points
+to the start of the data in the first page. This possibility doesn't
+complicate deallocation, because `vm_deallocate' does the right thing,
+rounding the start address down and the end address up to deallocate
+all arrived pages.
+
+ Out-of-line memory has a deallocate option, controlled by the
+`msgt_deallocate' bit. If it is `TRUE' and the out-of-line memory
+region is not null, then the region is implicitly deallocated from the
+sender, as if by `vm_deallocate'. In particular, the start and end
+addresses are rounded so that every page overlapped by the memory
+region is deallocated. The use of `msgt_deallocate' effectively
+changes the memory copy into a memory movement. In a received message,
+`msgt_deallocate' is `TRUE' in type descriptors for out-of-line memory.
+
+ Out-of-line memory can carry port rights.
+
+ ---------- Footnotes ----------
+
+ (1) Sending out-of-line memory with a non-page-aligned address, or a
+size which is not a page multiple, works but with a caveat. The extra
+bytes in the first and last page of the received memory are not zeroed,
+so the receiver can peek at more data than the sender intended to
+transfer. This might be a security problem for the sender.
+
+
+File: mach.info, Node: Message Send, Next: Message Receive, Prev: Memory, Up: Messaging Interface
+
+4.2.5 Message Send
+------------------
+
+The send operation queues a message to a port. The message carries a
+copy of the caller's data. After the send, the caller can freely modify
+the message buffer or the out-of-line memory regions and the message
+contents will remain unchanged.
+
+ Message delivery is reliable and sequenced. Messages are not lost,
+and messages sent to a port, from a single thread, are received in the
+order in which they were sent.
+
+ If the destination port's queue is full, then several things can
+happen. If the message is sent to a send-once right (`msgh_remote_port'
+carries a send-once right), then the kernel ignores the queue limit and
+delivers the message. Otherwise the caller blocks until there is room
+in the queue, unless the `MACH_SEND_TIMEOUT' or `MACH_SEND_NOTIFY'
+options are used. If a port has several blocked senders, then any of
+them may queue the next message when space in the queue becomes
+available, with the proviso that a blocked sender will not be
+indefinitely starved.
+
+ These options modify `MACH_SEND_MSG'. If `MACH_SEND_MSG' is not
+also specified, they are ignored.
+
+`MACH_SEND_TIMEOUT'
+ The timeout argument should specify a maximum time (in
+ milliseconds) for the call to block before giving up.(1) If the
+ message can't be queued before the timeout interval elapses, then
+ the call returns `MACH_SEND_TIMED_OUT'. A zero timeout is
+ legitimate.
+
+`MACH_SEND_NOTIFY'
+ The notify argument should specify a receive right for a notify
+ port. If the send were to block, then instead the message is
+ queued, `MACH_SEND_WILL_NOTIFY' is returned, and a msg-accepted
+ notification is requested. If `MACH_SEND_TIMEOUT' is also
+ specified, then `MACH_SEND_NOTIFY' doesn't take effect until the
+ timeout interval elapses.
+
+ With `MACH_SEND_NOTIFY', a task can forcibly queue to a send right
+ one message at a time. A msg-accepted notification is sent to the
+ the notify port when another message can be forcibly queued. If
+ an attempt is made to use `MACH_SEND_NOTIFY' before then, the call
+ returns a `MACH_SEND_NOTIFY_IN_PROGRESS' error.
+
+ The msg-accepted notification carries the name of the send right.
+ If the send right is deallocated before the msg-accepted
+ notification is generated, then the msg-accepted notification
+ carries the value `MACH_PORT_NULL'. If the destination port is
+ destroyed before the notification is generated, then a send-once
+ notification is generated instead.
+
+`MACH_SEND_INTERRUPT'
+ If specified, the `mach_msg' call will return
+ `MACH_SEND_INTERRUPTED' if a software interrupt aborts the call.
+ Otherwise, the send operation will be retried.
+
+`MACH_SEND_CANCEL'
+ The notify argument should specify a receive right for a notify
+ port. If the send operation removes the destination port right
+ from the caller, and the removed right had a dead-name request
+ registered for it, and notify is the notify port for the dead-name
+ request, then the dead-name request may be silently canceled
+ (instead of resulting in a port-deleted notification).
+
+ This option is typically used to cancel a dead-name request made
+ with the `MACH_RCV_NOTIFY' option. It should only be used as an
+ optimization.
+
+ The send operation can generate the following return codes. These
+return codes imply that the call did nothing:
+
+`MACH_SEND_MSG_TOO_SMALL'
+ The specified send_size was smaller than the minimum size for a
+ message.
+
+`MACH_SEND_NO_BUFFER'
+ A resource shortage prevented the kernel from allocating a message
+ buffer.
+
+`MACH_SEND_INVALID_DATA'
+ The supplied message buffer was not readable.
+
+`MACH_SEND_INVALID_HEADER'
+ The `msgh_bits' value was invalid.
+
+`MACH_SEND_INVALID_DEST'
+ The `msgh_remote_port' value was invalid.
+
+`MACH_SEND_INVALID_REPLY'
+ The `msgh_local_port' value was invalid.
+
+`MACH_SEND_INVALID_NOTIFY'
+ When using `MACH_SEND_CANCEL', the notify argument did not denote a
+ valid receive right.
+
+ These return codes imply that some or all of the message was
+destroyed:
+
+`MACH_SEND_INVALID_MEMORY'
+ The message body specified out-of-line data that was not readable.
+
+`MACH_SEND_INVALID_RIGHT'
+ The message body specified a port right which the caller didn't
+ possess.
+
+`MACH_SEND_INVALID_TYPE'
+ A type descriptor was invalid.
+
+`MACH_SEND_MSG_TOO_SMALL'
+ The last data item in the message ran over the end of the message.
+
+ These return codes imply that the message was returned to the caller
+with a pseudo-receive operation:
+
+`MACH_SEND_TIMED_OUT'
+ The timeout interval expired.
+
+`MACH_SEND_INTERRUPTED'
+ A software interrupt occurred.
+
+`MACH_SEND_INVALID_NOTIFY'
+ When using `MACH_SEND_NOTIFY', the notify argument did not denote a
+ valid receive right.
+
+`MACH_SEND_NO_NOTIFY'
+ A resource shortage prevented the kernel from setting up a
+ msg-accepted notification.
+
+`MACH_SEND_NOTIFY_IN_PROGRESS'
+ A msg-accepted notification was already requested, and hasn't yet
+ been generated.
+
+ These return codes imply that the message was queued:
+
+`MACH_SEND_WILL_NOTIFY'
+ The message was forcibly queued, and a msg-accepted notification
+ was requested.
+
+`MACH_MSG_SUCCESS'
+ The message was queued.
+
+ Some return codes, like `MACH_SEND_TIMED_OUT', imply that the
+message was almost sent, but could not be queued. In these situations,
+the kernel tries to return the message contents to the caller with a
+pseudo-receive operation. This prevents the loss of port rights or
+memory which only exist in the message. For example, a receive right
+which was moved into the message, or out-of-line memory sent with the
+deallocate bit.
+
+ The pseudo-receive operation is very similar to a normal receive
+operation. The pseudo-receive handles the port rights in the message
+header as if they were in the message body. They are not reversed.
+After the pseudo-receive, the message is ready to be resent. If the
+message is not resent, note that out-of-line memory regions may have
+moved and some port rights may have changed names.
+
+ The pseudo-receive operation may encounter resource shortages. This
+is similar to a `MACH_RCV_BODY_ERROR' return code from a receive
+operation. When this happens, the normal send return codes are
+augmented with the `MACH_MSG_IPC_SPACE', `MACH_MSG_VM_SPACE',
+`MACH_MSG_IPC_KERNEL', and `MACH_MSG_VM_KERNEL' bits to indicate the
+nature of the resource shortage.
+
+ The queueing of a message carrying receive rights may create a
+circular loop of receive rights and messages, which can never be
+received. For example, a message carrying a receive right can be sent
+to that receive right. This situation is not an error, but the kernel
+will garbage-collect such loops, destroying the messages and ports
+involved.
+
+ ---------- Footnotes ----------
+
+ (1) If MACH_SEND_TIMEOUT is used without MACH_SEND_INTERRUPT, then
+the timeout duration might not be accurate. When the call is
+interrupted and automatically retried, the original timeout is used.
+If interrupts occur frequently enough, the timeout interval might never
+expire.
+
+
+File: mach.info, Node: Message Receive, Next: Atomicity, Prev: Message Send, Up: Messaging Interface
+
+4.2.6 Message Receive
+---------------------
+
+The receive operation dequeues a message from a port. The receiving
+task acquires the port rights and out-of-line memory regions carried in
+the message.
+
+ The `rcv_name' argument specifies a port or port set from which to
+receive. If a port is specified, the caller must possess the receive
+right for the port and the port must not be a member of a port set. If
+no message is present, then the call blocks, subject to the
+`MACH_RCV_TIMEOUT' option.
+
+ If a port set is specified, the call will receive a message sent to
+any of the member ports. It is permissible for the port set to have no
+member ports, and ports may be added and removed while a receive from
+the port set is in progress. The received message can come from any of
+the member ports which have messages, with the proviso that a member
+port with messages will not be indefinitely starved. The
+`msgh_local_port' field in the received message header specifies from
+which port in the port set the message came.
+
+ The `rcv_size' argument specifies the size of the caller's message
+buffer. The `mach_msg' call will not receive a message larger than
+`rcv_size'. Messages that are too large are destroyed, unless the
+`MACH_RCV_LARGE' option is used.
+
+ The destination and reply ports are reversed in a received message
+header. The `msgh_local_port' field names the destination port, from
+which the message was received, and the `msgh_remote_port' field names
+the reply port right. The bits in `msgh_bits' are also reversed. The
+`MACH_MSGH_BITS_LOCAL' bits have the value `MACH_MSG_TYPE_PORT_SEND' if
+the message was sent to a send right, and the value
+`MACH_MSG_TYPE_PORT_SEND_ONCE' if was sent to a send-once right. The
+`MACH_MSGH_BITS_REMOTE' bits describe the reply port right.
+
+ A received message can contain port rights and out-of-line memory.
+The `msgh_local_port' field does not receive a port right; the act of
+receiving the message destroys the send or send-once right for the
+destination port. The msgh_remote_port field does name a received port
+right, the reply port right, and the message body can carry port rights
+and memory if `MACH_MSGH_BITS_COMPLEX' is present in msgh_bits.
+Received port rights and memory should be consumed or deallocated in
+some fashion.
+
+ In almost all cases, `msgh_local_port' will specify the name of a
+receive right, either `rcv_name' or if `rcv_name' is a port set, a
+member of `rcv_name'. If other threads are concurrently manipulating
+the receive right, the situation is more complicated. If the receive
+right is renamed during the call, then `msgh_local_port' specifies the
+right's new name. If the caller loses the receive right after the
+message was dequeued from it, then `mach_msg' will proceed instead of
+returning `MACH_RCV_PORT_DIED'. If the receive right was destroyed,
+then `msgh_local_port' specifies `MACH_PORT_DEAD'. If the receive
+right still exists, but isn't held by the caller, then
+`msgh_local_port' specifies `MACH_PORT_NULL'.
+
+ Received messages are stamped with a sequence number, taken from the
+port from which the message was received. (Messages received from a
+port set are stamped with a sequence number from the appropriate member
+port.) Newly created ports start with a zero sequence number, and the
+sequence number is reset to zero whenever the port's receive right moves
+between tasks. When a message is dequeued from the port, it is stamped
+with the port's sequence number and the port's sequence number is then
+incremented. The dequeue and increment operations are atomic, so that
+multiple threads receiving messages from a port can use the
+`msgh_seqno' field to reconstruct the original order of the messages.
+
+ These options modify `MACH_RCV_MSG'. If `MACH_RCV_MSG' is not also
+specified, they are ignored.
+
+`MACH_RCV_TIMEOUT'
+ The timeout argument should specify a maximum time (in
+ milliseconds) for the call to block before giving up.(1) If no
+ message arrives before the timeout interval elapses, then the call
+ returns `MACH_RCV_TIMED_OUT'. A zero timeout is legitimate.
+
+`MACH_RCV_NOTIFY'
+ The notify argument should specify a receive right for a notify
+ port. If receiving the reply port creates a new port right in the
+ caller, then the notify port is used to request a dead-name
+ notification for the new port right.
+
+`MACH_RCV_INTERRUPT'
+ If specified, the `mach_msg' call will return
+ `MACH_RCV_INTERRUPTED' if a software interrupt aborts the call.
+ Otherwise, the receive operation will be retried.
+
+`MACH_RCV_LARGE'
+ If the message is larger than `rcv_size', then the message remains
+ queued instead of being destroyed. The call returns
+ `MACH_RCV_TOO_LARGE' and the actual size of the message is returned
+ in the `msgh_size' field of the message header.
+
+ The receive operation can generate the following return codes. These
+return codes imply that the call did not dequeue a message:
+
+`MACH_RCV_INVALID_NAME'
+ The specified `rcv_name' was invalid.
+
+`MACH_RCV_IN_SET'
+ The specified port was a member of a port set.
+
+`MACH_RCV_TIMED_OUT'
+ The timeout interval expired.
+
+`MACH_RCV_INTERRUPTED'
+ A software interrupt occurred.
+
+`MACH_RCV_PORT_DIED'
+ The caller lost the rights specified by `rcv_name'.
+
+`MACH_RCV_PORT_CHANGED'
+ `rcv_name' specified a receive right which was moved into a port
+ set during the call.
+
+`MACH_RCV_TOO_LARGE'
+ When using `MACH_RCV_LARGE', and the message was larger than
+ `rcv_size'. The message is left queued, and its actual size is
+ returned in the `msgh_size' field of the message buffer.
+
+ These return codes imply that a message was dequeued and destroyed:
+
+`MACH_RCV_HEADER_ERROR'
+ A resource shortage prevented the reception of the port rights in
+ the message header.
+
+`MACH_RCV_INVALID_NOTIFY'
+ When using `MACH_RCV_NOTIFY', the notify argument did not denote a
+ valid receive right.
+
+`MACH_RCV_TOO_LARGE'
+ When not using `MACH_RCV_LARGE', a message larger than `rcv_size'
+ was dequeued and destroyed.
+
+ In these situations, when a message is dequeued and then destroyed,
+the reply port and all port rights and memory in the message body are
+destroyed. However, the caller receives the message's header, with all
+fields correct, including the destination port but excepting the reply
+port, which is `MACH_PORT_NULL'.
+
+ These return codes imply that a message was received:
+
+`MACH_RCV_BODY_ERROR'
+ A resource shortage prevented the reception of a port right or
+ out-of-line memory region in the message body. The message header,
+ including the reply port, is correct. The kernel attempts to
+ transfer all port rights and memory regions in the body, and only
+ destroys those that can't be transferred.
+
+`MACH_RCV_INVALID_DATA'
+ The specified message buffer was not writable. The calling task
+ did successfully receive the port rights and out-of-line memory
+ regions in the message.
+
+`MACH_MSG_SUCCESS'
+ A message was received.
+
+ Resource shortages can occur after a message is dequeued, while
+transferring port rights and out-of-line memory regions to the receiving
+task. The `mach_msg' call returns `MACH_RCV_HEADER_ERROR' or
+`MACH_RCV_BODY_ERROR' in this situation. These return codes always
+carry extra bits (bitwise-ored) that indicate the nature of the resource
+shortage:
+
+`MACH_MSG_IPC_SPACE'
+ There was no room in the task's IPC name space for another port
+ name.
+
+`MACH_MSG_VM_SPACE'
+ There was no room in the task's VM address space for an out-of-line
+ memory region.
+
+`MACH_MSG_IPC_KERNEL'
+ A kernel resource shortage prevented the reception of a port right.
+
+`MACH_MSG_VM_KERNEL'
+ A kernel resource shortage prevented the reception of an
+ out-of-line memory region.
+
+ If a resource shortage prevents the reception of a port right, the
+port right is destroyed and the caller sees the name `MACH_PORT_NULL'.
+If a resource shortage prevents the reception of an out-of-line memory
+region, the region is destroyed and the caller receives a zero address.
+In addition, the `msgt_size' (`msgtl_size') field in the data's type
+descriptor is changed to zero. If a resource shortage prevents the
+reception of out-of-line memory carrying port rights, then the port
+rights are always destroyed if the memory region can not be received.
+A task never receives port rights or memory regions that it isn't told
+about.
+
+ ---------- Footnotes ----------
+
+ (1) If MACH_RCV_TIMEOUT is used without MACH_RCV_INTERRUPT, then the
+timeout duration might not be accurate. When the call is interrupted
+and automatically retried, the original timeout is used. If interrupts
+occur frequently enough, the timeout interval might never expire.
+
+
+File: mach.info, Node: Atomicity, Prev: Message Receive, Up: Messaging Interface
+
+4.2.7 Atomicity
+---------------
+
+The `mach_msg' call handles port rights in a message header atomically.
+Port rights and out-of-line memory in a message body do not enjoy this
+atomicity guarantee. The message body may be processed front-to-back,
+back-to-front, first out-of-line memory then port rights, in some
+random order, or even atomically.
+
+ For example, consider sending a message with the destination port
+specified as `MACH_MSG_TYPE_MOVE_SEND' and the reply port specified as
+`MACH_MSG_TYPE_COPY_SEND'. The same send right, with one
+user-reference, is supplied for both the `msgh_remote_port' and
+`msgh_local_port' fields. Because `mach_msg' processes the message
+header atomically, this succeeds. If `msgh_remote_port' were processed
+before `msgh_local_port', then `mach_msg' would return
+`MACH_SEND_INVALID_REPLY' in this situation.
+
+ On the other hand, suppose the destination and reply port are both
+specified as `MACH_MSG_TYPE_MOVE_SEND', and again the same send right
+with one user-reference is supplied for both. Now the send operation
+fails, but because it processes the header atomically, mach_msg can
+return either `MACH_SEND_INVALID_DEST' or `MACH_SEND_INVALID_REPLY'.
+
+ For example, consider receiving a message at the same time another
+thread is deallocating the destination receive right. Suppose the reply
+port field carries a send right for the destination port. If the
+deallocation happens before the dequeuing, then the receiver gets
+`MACH_RCV_PORT_DIED'. If the deallocation happens after the receive,
+then the `msgh_local_port' and the `msgh_remote_port' fields both
+specify the same right, which becomes a dead name when the receive
+right is deallocated. If the deallocation happens between the dequeue
+and the receive, then the `msgh_local_port' and `msgh_remote_port'
+fields both specify `MACH_PORT_DEAD'. Because the header is processed
+atomically, it is not possible for just one of the two fields to hold
+`MACH_PORT_DEAD'.
+
+ The `MACH_RCV_NOTIFY' option provides a more likely example.
+Suppose a message carrying a send-once right reply port is received with
+`MACH_RCV_NOTIFY' at the same time the reply port is destroyed. If the
+reply port is destroyed first, then `msgh_remote_port' specifies
+`MACH_PORT_DEAD' and the kernel does not generate a dead-name
+notification. If the reply port is destroyed after it is received,
+then `msgh_remote_port' specifies a dead name for which the kernel
+generates a dead-name notification. It is not possible to receive the
+reply port right and have it turn into a dead name before the dead-name
+notification is requested; as part of the message header the reply port
+is received atomically.
+
+
+File: mach.info, Node: Port Manipulation Interface, Prev: Messaging Interface, Up: Inter Process Communication
+
+4.3 Port Manipulation Interface
+===============================
+
+This section describes the interface to create, destroy and manipulate
+ports, port rights and port sets.
+
+ -- Data type: ipc_space_t
+ This is a `task_t' (and as such a `mach_port_t'), which holds a
+ port name associated with a port that represents an IPC space in
+ the kernel. An IPC space is used by the kernel to manage the port
+ names and rights available to a task. The IPC space doesn't get a
+ port name of its own. Instead the port name of the task
+ containing the IPC space is used to name the IPC space of the task
+ (as is indicated by the fact that the type of `ipc_space_t' is
+ actually `task_t').
+
+ The IPC spaces of tasks are the only ones accessible outside of
+ the kernel.
+
+* Menu:
+
+* Port Creation:: How to create new ports and port sets.
+* Port Destruction:: How to destroy ports and port sets.
+* Port Names:: How to query and manipulate port names.
+* Port Rights:: How to work with port rights.
+* Ports and other Tasks:: How to move rights between tasks.
+* Receive Rights:: How to work with receive rights.
+* Port Sets:: How to work with port sets.
+* Request Notifications:: How to request notifications for events.
+
+
+File: mach.info, Node: Port Creation, Next: Port Destruction, Up: Port Manipulation Interface
+
+4.3.1 Port Creation
+-------------------
+
+ -- Function: kern_return_t mach_port_allocate (ipc_space_t TASK,
+ mach_port_right_t RIGHT, mach_port_t *NAME)
+ The `mach_port_allocate' function creates a new right in the
+ specified task. The new right's name is returned in NAME, which
+ may be any name that wasn't in use.
+
+ The RIGHT argument takes the following values:
+
+ `MACH_PORT_RIGHT_RECEIVE'
+ `mach_port_allocate' creates a port. The new port is not a
+ member of any port set. It doesn't have any extant send or
+ send-once rights. Its make-send count is zero, its sequence
+ number is zero, its queue limit is
+ `MACH_PORT_QLIMIT_DEFAULT', and it has no queued messages.
+ NAME denotes the receive right for the new port.
+
+ TASK does not hold send rights for the new port, only the
+ receive right. `mach_port_insert_right' and
+ `mach_port_extract_right' can be used to convert the receive
+ right into a combined send/receive right.
+
+ `MACH_PORT_RIGHT_PORT_SET'
+ `mach_port_allocate' creates a port set. The new port set
+ has no members.
+
+ `MACH_PORT_RIGHT_DEAD_NAME'
+ `mach_port_allocate' creates a dead name. The new dead name
+ has one user reference.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
+ RIGHT was invalid, `KERN_NO_SPACE' if there was no room in TASK's
+ IPC name space for another right and `KERN_RESOURCE_SHORTAGE' if
+ the kernel ran out of memory.
+
+ The `mach_port_allocate' call is actually an RPC to TASK, normally
+ a send right for a task port, but potentially any send right. In
+ addition to the normal diagnostic return codes from the call's
+ server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+ -- Function: mach_port_t mach_reply_port ()
+ The `mach_reply_port' system call creates a reply port in the
+ calling task.
+
+ `mach_reply_port' creates a port, giving the calling task the
+ receive right for the port. The call returns the name of the new
+ receive right.
+
+ This is very much like creating a receive right with the
+ `mach_port_allocate' call, with two differences. First,
+ `mach_reply_port' is a system call and not an RPC (which requires a
+ reply port). Second, the port created by `mach_reply_port' may be
+ optimized for use as a reply port.
+
+ The function returns `MACH_PORT_NULL' if a resource shortage
+ prevented the creation of the receive right.
+
+ -- Function: kern_return_t mach_port_allocate_name (ipc_space_t TASK,
+ mach_port_right_t RIGHT, mach_port_t NAME)
+ The function `mach_port_allocate_name' creates a new right in the
+ specified task, with a specified name for the new right. NAME
+ must not already be in use for some right, and it can't be the
+ reserved values `MACH_PORT_NULL' and `MACH_PORT_DEAD'.
+
+ The RIGHT argument takes the following values:
+
+ `MACH_PORT_RIGHT_RECEIVE'
+ `mach_port_allocate_name' creates a port. The new port is
+ not a member of any port set. It doesn't have any extant
+ send or send-once rights. Its make-send count is zero, its
+ sequence number is zero, its queue limit is
+ `MACH_PORT_QLIMIT_DEFAULT', and it has no queued messages.
+ NAME denotes the receive right for the new port.
+
+ TASK does not hold send rights for the new port, only the
+ receive right. `mach_port_insert_right' and
+ `mach_port_extract_right' can be used to convert the receive
+ right into a combined send/receive right.
+
+ `MACH_PORT_RIGHT_PORT_SET'
+ `mach_port_allocate_name' creates a port set. The new port
+ set has no members.
+
+ `MACH_PORT_RIGHT_DEAD_NAME'
+ `mach_port_allocate_name' creates a new dead name. The new
+ dead name has one user reference.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
+ RIGHT was invalid or NAME was `MACH_PORT_NULL' or
+ `MACH_PORT_DEAD', `KERN_NAME_EXISTS' if NAME was already in use
+ for a port right and `KERN_RESOURCE_SHORTAGE' if the kernel ran
+ out of memory.
+
+ The `mach_port_allocate_name' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+
+File: mach.info, Node: Port Destruction, Next: Port Names, Prev: Port Creation, Up: Port Manipulation Interface
+
+4.3.2 Port Destruction
+----------------------
+
+ -- Function: kern_return_t mach_port_deallocate (ipc_space_t TASK,
+ mach_port_t NAME)
+ The function `mach_port_deallocate' releases a user reference for a
+ right in TASK's IPC name space. It allows a task to release a
+ user reference for a send or send-once right without failing if
+ the port has died and the right is now actually a dead name.
+
+ If NAME denotes a dead name, send right, or send-once right, then
+ the right loses one user reference. If it only had one user
+ reference, then the right is destroyed.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME
+ denoted an invalid right.
+
+ The `mach_port_deallocate' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+ -- Function: kern_return_t mach_port_destroy (ipc_space_t TASK,
+ mach_port_t NAME)
+ The function `mach_port_destroy' deallocates all rights denoted by
+ a name. The name becomes immediately available for reuse.
+
+ For most purposes, `mach_port_mod_refs' and `mach_port_deallocate'
+ are preferable.
+
+ If NAME denotes a port set, then all members of the port set are
+ implicitly removed from the port set.
+
+ If NAME denotes a receive right that is a member of a port set,
+ the receive right is implicitly removed from the port set. If
+ there is a port-destroyed request registered for the port, then
+ the receive right is not actually destroyed, but instead is sent
+ in a port-destroyed notification to the backup port. If there is
+ no registered port-destroyed request, remaining messages queued to
+ the port are destroyed and extant send and send-once rights turn
+ into dead names. If those send and send-once rights have
+ dead-name requests registered, then dead-name notifications are
+ generated for them.
+
+ If NAME denotes a send-once right, then the send-once right is
+ used to produce a send-once notification for the port.
+
+ If NAME denotes a send-once, send, and/or receive right, and it
+ has a dead-name request registered, then the registered send-once
+ right is used to produce a port-deleted notification for the name.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ NAME did not denote a right.
+
+ The `mach_port_destroy' call is actually an RPC to TASK, normally
+ a send right for a task port, but potentially any send right. In
+ addition to the normal diagnostic return codes from the call's
+ server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+
+File: mach.info, Node: Port Names, Next: Port Rights, Prev: Port Destruction, Up: Port Manipulation Interface
+
+4.3.3 Port Names
+----------------
+
+ -- Function: kern_return_t mach_port_names (ipc_space_t TASK,
+ mach_port_array_t *NAMES, mach_msg_type_number_t *NCOUNT,
+ mach_port_type_array_t *TYPES, mach_msg_type_number_t *TCOUNT)
+ The function `mach_port_names' returns information about TASK's
+ port name space. For each name, it also returns what type of
+ rights TASK holds. (The same information returned by
+ `mach_port_type'.) NAMES and TYPES are arrays that are
+ automatically allocated when the reply message is received. The
+ user should `vm_deallocate' them when the data is no longer needed.
+
+ `mach_port_names' will return in NAMES the names of the ports,
+ port sets, and dead names in the task's port name space, in no
+ particular order and in NCOUNT the number of names returned. It
+ will return in TYPES the type of each corresponding name, which
+ indicates what kind of rights the task holds with that name.
+ TCOUNT should be the same as NCOUNT.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_RESOURCE_SHORTAGE'
+ if the kernel ran out of memory.
+
+ The `mach_port_names' call is actually an RPC to TASK, normally a
+ send right for a task port, but potentially any send right. In
+ addition to the normal diagnostic return codes from the call's
+ server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+ -- Function: kern_return_t mach_port_type (ipc_space_t TASK,
+ mach_port_t NAME, mach_port_type_t *PTYPE)
+ The function `mach_port_type' returns information about TASK's
+ rights for a specific name in its port name space. The returned
+ PTYPE is a bitmask indicating what rights TASK holds for the port,
+ port set or dead name. The bitmask is composed of the following
+ bits:
+
+ `MACH_PORT_TYPE_SEND'
+ The name denotes a send right.
+
+ `MACH_PORT_TYPE_RECEIVE'
+ The name denotes a receive right.
+
+ `MACH_PORT_TYPE_SEND_ONCE'
+ The name denotes a send-once right.
+
+ `MACH_PORT_TYPE_PORT_SET'
+ The name denotes a port set.
+
+ `MACH_PORT_TYPE_DEAD_NAME'
+ The name is a dead name.
+
+ `MACH_PORT_TYPE_DNREQUEST'
+ A dead-name request has been registered for the right.
+
+ `MACH_PORT_TYPE_MAREQUEST'
+ A msg-accepted request for the right is pending.
+
+ `MACH_PORT_TYPE_COMPAT'
+ The port right was created in the compatibility mode.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid and `KERN_INVALID_NAME' if
+ NAME did not denote a right.
+
+ The `mach_port_type' call is actually an RPC to TASK, normally a
+ send right for a task port, but potentially any send right. In
+ addition to the normal diagnostic return codes from the call's
+ server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+ -- Function: kern_return_t mach_port_rename (ipc_space_t TASK,
+ mach_port_t OLD_NAME, mach_port_t NEW_NAME)
+ The function `mach_port_rename' changes the name by which a port,
+ port set, or dead name is known to TASK. OLD_NAME is the original
+ name and NEW_NAME the new name for the port right. NEW_NAME must
+ not already be in use, and it can't be the distinguished values
+ `MACH_PORT_NULL' and `MACH_PORT_DEAD'.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ OLD_NAME did not denote a right, `KERN_INVALID_VALUE' if NEW_NAME
+ was `MACH_PORT_NULL' or `MACH_PORT_DEAD', `KERN_NAME_EXISTS' if
+ `new_name' already denoted a right and `KERN_RESOURCE_SHORTAGE' if
+ the kernel ran out of memory.
+
+ The `mach_port_rename' call is actually an RPC to TASK, normally a
+ send right for a task port, but potentially any send right. In
+ addition to the normal diagnostic return codes from the call's
+ server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+
+File: mach.info, Node: Port Rights, Next: Ports and other Tasks, Prev: Port Names, Up: Port Manipulation Interface
+
+4.3.4 Port Rights
+-----------------
+
+ -- Function: kern_return_t mach_port_get_refs (ipc_space_t TASK,
+ mach_port_t NAME, mach_port_right_t RIGHT,
+ mach_port_urefs_t *REFS)
+ The function `mach_port_get_refs' returns the number of user
+ references a task has for a right.
+
+ The RIGHT argument takes the following values:
+ * `MACH_PORT_RIGHT_SEND'
+
+ * `MACH_PORT_RIGHT_RECEIVE'
+
+ * `MACH_PORT_RIGHT_SEND_ONCE'
+
+ * `MACH_PORT_RIGHT_PORT_SET'
+
+ * `MACH_PORT_RIGHT_DEAD_NAME'
+
+ If NAME denotes a right, but not the type of right specified, then
+ zero is returned. Otherwise a positive number of user references
+ is returned. Note that a name may simultaneously denote send and
+ receive rights.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
+ RIGHT was invalid and `KERN_INVALID_NAME' if NAME did not denote a
+ right.
+
+ The `mach_port_get_refs' call is actually an RPC to TASK, normally
+ a send right for a task port, but potentially any send right. In
+ addition to the normal diagnostic return codes from the call's
+ server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+ -- Function: kern_return_t mach_port_mod_refs (ipc_space_t TASK,
+ mach_port_t NAME, mach_port_right_t RIGHT,
+ mach_port_delta_t DELTA)
+ The function `mach_port_mod_refs' requests that the number of user
+ references a task has for a right be changed. This results in the
+ right being destroyed, if the number of user references is changed
+ to zero. The task holding the right is TASK, NAME should denote
+ the specified right. RIGHT denotes the type of right being
+ modified. DELTA is the signed change to the number of user
+ references.
+
+ The RIGHT argument takes the following values:
+ * `MACH_PORT_RIGHT_SEND'
+
+ * `MACH_PORT_RIGHT_RECEIVE'
+
+ * `MACH_PORT_RIGHT_SEND_ONCE'
+
+ * `MACH_PORT_RIGHT_PORT_SET'
+
+ * `MACH_PORT_RIGHT_DEAD_NAME'
+
+ The number of user references for the right is changed by the
+ amount DELTA, subject to the following restrictions: port sets,
+ receive rights, and send-once rights may only have one user
+ reference. The resulting number of user references can't be
+ negative. If the resulting number of user references is zero, the
+ effect is to deallocate the right. For dead names and send
+ rights, there is an implementation-defined maximum number of user
+ references.
+
+ If the call destroys the right, then the effect is as described for
+ `mach_port_destroy', with the exception that `mach_port_destroy'
+ simultaneously destroys all the rights denoted by a name, while
+ `mach_port_mod_refs' can only destroy one right. The name will be
+ available for reuse if it only denoted the one right.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
+ RIGHT was invalid or the user-reference count would become
+ negative, `KERN_INVALID_NAME' if NAME did not denote a right,
+ `KERN_INVALID_RIGHT' if NAME denoted a right, but not the
+ specified right and `KERN_UREFS_OVERFLOW' if the user-reference
+ count would overflow.
+
+ The `mach_port_mod_refs' call is actually an RPC to TASK, normally
+ a send right for a task port, but potentially any send right. In
+ addition to the normal diagnostic return codes from the call's
+ server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+
+File: mach.info, Node: Ports and other Tasks, Next: Receive Rights, Prev: Port Rights, Up: Port Manipulation Interface
+
+4.3.5 Ports and other Tasks
+---------------------------
+
+ -- Function: kern_return_t mach_port_insert_right (ipc_space_t TASK,
+ mach_port_t NAME, mach_port_t RIGHT,
+ mach_msg_type_name_t RIGHT_TYPE)
+ The function MACH_PORT_INSERT_RIGHT inserts into TASK the caller's
+ right for a port, using a specified name for the right in the
+ target task.
+
+ The specified NAME can't be one of the reserved values
+ `MACH_PORT_NULL' or `MACH_PORT_DEAD'. The RIGHT can't be
+ `MACH_PORT_NULL' or `MACH_PORT_DEAD'.
+
+ The argument RIGHT_TYPE specifies a right to be inserted and how
+ that right should be extracted from the caller. It should be a
+ value appropriate for MSGT_NAME; see `mach_msg'. If RIGHT_TYPE is
+ `MACH_MSG_TYPE_MAKE_SEND', `MACH_MSG_TYPE_MOVE_SEND', or
+ `MACH_MSG_TYPE_COPY_SEND', then a send right is inserted. If the
+ target already holds send or receive rights for the port, then
+ NAME should denote those rights in the target. Otherwise, NAME
+ should be unused in the target. If the target already has send
+ rights, then those send rights gain an additional user reference.
+ Otherwise, the target gains a send right, with a user reference
+ count of one.
+
+ If RIGHT_TYPE is `MACH_MSG_TYPE_MAKE_SEND_ONCE' or
+ `MACH_MSG_TYPE_MOVE_SEND_ONCE', then a send-once right is inserted.
+ The name should be unused in the target. The target gains a
+ send-once right.
+
+ If RIGHT_TYPE is `MACH_MSG_TYPE_MOVE_RECEIVE', then a receive
+ right is inserted. If the target already holds send rights for the
+ port, then name should denote those rights in the target.
+ Otherwise, name should be unused in the target. The receive right
+ is moved into the target task.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
+ RIGHT was not a port right or NAME was `MACH_PORT_NULL' or
+ `MACH_PORT_DEAD', `KERN_NAME_EXISTS' if NAME already denoted a
+ right, `KERN_INVALID_CAPABILITY' if RIGHT was `MACH_PORT_NULL' or
+ `MACH_PORT_DEAD' `KERN_RIGHT_EXISTS' if TASK already had rights
+ for the port, with a different name, `KERN_UREFS_OVERFLOW' if the
+ user-reference count would overflow and `KERN_RESOURCE_SHORTAGE'
+ if the kernel ran out of memory.
+
+ The `mach_port_insert_right' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return
+ `mach_msg' return codes.
+
+ -- Function: kern_return_t mach_port_extract_right (ipc_space_t TASK,
+ mach_port_t NAME, mach_msg_type_name_t DESIRED_TYPE,
+ mach_port_t *RIGHT, mach_msg_type_name_t *ACQUIRED_TYPE)
+ The function MACH_PORT_EXTRACT_RIGHT extracts a port right from
+ the target TASK and returns it to the caller as if the task sent
+ the right voluntarily, using DESIRED_TYPE as the value of
+ MSGT_NAME. *Note Mach Message Call::.
+
+ The returned value of ACQUIRED_TYPE will be
+ `MACH_MSG_TYPE_PORT_SEND' if a send right is extracted,
+ `MACH_MSG_TYPE_PORT_RECEIVE' if a receive right is extracted, and
+ `MACH_MSG_TYPE_PORT_SEND_ONCE' if a send-once right is extracted.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted
+ a right, but an invalid one, `KERN_INVALID_VALUE' if DESIRED_TYPE
+ was invalid.
+
+ The `mach_port_extract_right' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+
+File: mach.info, Node: Receive Rights, Next: Port Sets, Prev: Ports and other Tasks, Up: Port Manipulation Interface
+
+4.3.6 Receive Rights
+--------------------
+
+ -- Data type: mach_port_seqno_t
+ The `mach_port_seqno_t' data type is an `unsigned int' which
+ contains the sequence number of a port.
+
+ -- Data type: mach_port_mscount_t
+ The `mach_port_mscount_t' data type is an `unsigned int' which
+ contains the make-send count for a port.
+
+ -- Data type: mach_port_msgcount_t
+ The `mach_port_msgcount_t' data type is an `unsigned int' which
+ contains a number of messages.
+
+ -- Data type: mach_port_rights_t
+ The `mach_port_rights_t' data type is an `unsigned int' which
+ contains a number of rights for a port.
+
+ -- Data type: mach_port_status_t
+ This structure contains some status information about a port,
+ which can be queried with `mach_port_get_receive_status'. It has
+ the following members:
+
+ `mach_port_t mps_pset'
+ The containing port set.
+
+ `mach_port_seqno_t mps_seqno'
+ The sequence number.
+
+ `mach_port_mscount_t mps_mscount'
+ The make-send count.
+
+ `mach_port_msgcount_t mps_qlimit'
+ The maximum number of messages in the queue.
+
+ `mach_port_msgcount_t mps_msgcount'
+ The current number of messages in the queue.
+
+ `mach_port_rights_t mps_sorights'
+ The number of send-once rights that exist.
+
+ `boolean_t mps_srights'
+ `TRUE' if send rights exist.
+
+ `boolean_t mps_pdrequest'
+ `TRUE' if port-deleted notification is requested.
+
+ `boolean_t mps_nsrequest'
+ `TRUE' if no-senders notification is requested.
+
+ -- Function: kern_return_t mach_port_get_receive_status
+ (ipc_space_t TASK, mach_port_t NAME,
+ mach_port_status_t *STATUS)
+ The function `mach_port_get_receive_status' returns the current
+ status of the specified receive right.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME
+ denoted a right, but not a receive right.
+
+ The `mach_port_get_receive_status' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return
+ `mach_msg' return codes.
+
+ -- Function: kern_return_t mach_port_set_mscount (ipc_space_t TASK,
+ mach_port_t NAME, mach_port_mscount_t MSCOUNT)
+ The function `mach_port_set_mscount' changes the make-send count of
+ TASK's receive right named NAME to MSCOUNT. All values for
+ MSCOUNT are valid.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME
+ denoted a right, but not a receive right.
+
+ The `mach_port_set_mscount' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return
+ `mach_msg' return codes.
+
+ -- Function: kern_return_t mach_port_set_qlimit (ipc_space_t TASK,
+ mach_port_t NAME, mach_port_msgcount_t QLIMIT)
+ The function `mach_port_set_qlimit' changes the queue limit TASK's
+ receive right named NAME to QLIMIT. Valid values for QLIMIT are
+ between zero and `MACH_PORT_QLIMIT_MAX', inclusive.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted
+ a right, but not a receive right and `KERN_INVALID_VALUE' if
+ QLIMIT was invalid.
+
+ The `mach_port_set_qlimit' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return
+ `mach_msg' return codes.
+
+ -- Function: kern_return_t mach_port_set_seqno (ipc_space_t TASK,
+ mach_port_t NAME, mach_port_seqno_t SEQNO)
+ The function `mach_port_set_seqno' changes the sequence number
+ TASK's receive right named NAME to SEQNO. All sequence number
+ values are valid. The next message received from the port will be
+ stamped with the specified sequence number.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ NAME did not denote a right and `KERN_INVALID_RIGHT' if NAME
+ denoted a right, but not a receive right.
+
+ The `mach_port_set_seqno' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return
+ `mach_msg' return codes.
+
+
+File: mach.info, Node: Port Sets, Next: Request Notifications, Prev: Receive Rights, Up: Port Manipulation Interface
+
+4.3.7 Port Sets
+---------------
+
+ -- Function: kern_return_t mach_port_get_set_status (ipc_space_t TASK,
+ mach_port_t NAME, mach_port_array_t *MEMBERS,
+ mach_msg_type_number_t *COUNT)
+ The function `mach_port_get_set_status' returns the members of a
+ port set. MEMBERS is an array that is automatically allocated
+ when the reply message is received. The user should
+ `vm_deallocate' it when the data is no longer needed.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ NAME did not denote a right, `KERN_INVALID_RIGHT' if NAME denoted
+ a right, but not a receive right and `KERN_RESOURCE_SHORTAGE' if
+ the kernel ran out of memory.
+
+ The `mach_port_get_set_status' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+ -- Function: kern_return_t mach_port_move_member (ipc_space_t TASK,
+ mach_port_t MEMBER, mach_port_t AFTER)
+ The function MACH_PORT_MOVE_MEMBER moves the receive right MEMBER
+ into the port set AFTER. If the receive right is already a member
+ of another port set, it is removed from that set first (the whole
+ operation is atomic). If the port set is `MACH_PORT_NULL', then
+ the receive right is not put into a port set, but removed from its
+ current port set.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_NAME' if
+ MEMBER or AFTER did not denote a right, `KERN_INVALID_RIGHT' if
+ MEMBER denoted a right, but not a receive right or AFTER denoted a
+ right, but not a port set, and `KERN_NOT_IN_SET' if AFTER was
+ `MACH_PORT_NULL', but `member' wasn't currently in a port set.
+
+ The `mach_port_move_member' call is actually an RPC to TASK,
+ normally a send right for a task port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return
+ `mach_msg' return codes.
+
+
+File: mach.info, Node: Request Notifications, Prev: Port Sets, Up: Port Manipulation Interface
+
+4.3.8 Request Notifications
+---------------------------
+
+ -- Function: kern_return_t mach_port_request_notification
+ (ipc_space_t TASK, mach_port_t NAME, mach_msg_id_t VARIANT,
+ mach_port_mscount_t SYNC, mach_port_t NOTIFY,
+ mach_msg_type_name_t NOTIFY_TYPE, mach_port_t *PREVIOUS)
+ The function `mach_port_request_notification' registers a request
+ for a notification and supplies the send-once right NOTIFY to
+ which the notification will be sent. The NOTIFY_TYPE denotes the
+ IPC type for the send-once right, which can be
+ `MACH_MSG_TYPE_MAKE_SEND_ONCE' or `MACH_MSG_TYPE_MOVE_SEND_ONCE'.
+ It is an atomic swap, returning the previously registered
+ send-once right (or `MACH_PORT_NULL' for none) in PREVIOUS. A
+ previous notification request may be cancelled by providing
+ `MACH_PORT_NULL' for NOTIFY.
+
+ The VARIANT argument takes the following values:
+
+ `MACH_NOTIFY_PORT_DESTROYED'
+ SYNC must be zero. The NAME must specify a receive right,
+ and the call requests a port-destroyed notification for the
+ receive right. If the receive right were to have been
+ destroyed, say by `mach_port_destroy', then instead the
+ receive right will be sent in a port-destroyed notification
+ to the registered send-once right.
+
+ `MACH_NOTIFY_DEAD_NAME'
+ The call requests a dead-name notification. NAME specifies
+ send, receive, or send-once rights for a port. If the port
+ is destroyed (and the right remains, becoming a dead name),
+ then a dead-name notification which carries the name of the
+ right will be sent to the registered send-once right. If
+ NOTIFY is not null and sync is non-zero, the name may specify
+ a dead name, and a dead-name notification is immediately
+ generated.
+
+ Whenever a dead-name notification is generated, the user
+ reference count of the dead name is incremented. For
+ example, a send right with two user refs has a registered
+ dead-name request. If the port is destroyed, the send right
+ turns into a dead name with three user refs (instead of two),
+ and a dead-name notification is generated.
+
+ If the name is made available for reuse, perhaps because of
+ `mach_port_destroy' or `mach_port_mod_refs', or the name
+ denotes a send-once right which has a message sent to it,
+ then the registered send-once right is used to generate a
+ port-deleted notification.
+
+ `MACH_NOTIFY_NO_SENDERS'
+ The call requests a no-senders notification. NAME must
+ specify a receive right. If NOTIFY is not null, and the
+ receive right's make-send count is greater than or equal to
+ the sync value, and it has no extant send rights, than an
+ immediate no-senders notification is generated. Otherwise
+ the notification is generated when the receive right next
+ loses its last extant send right. In either case, any
+ previously registered send-once right is returned.
+
+ The no-senders notification carries the value the port's
+ make-send count had when it was generated. The make-send
+ count is incremented whenever `MACH_MSG_TYPE_MAKE_SEND' is
+ used to create a new send right from the receive right. The
+ make-send count is reset to zero when the receive right is
+ carried in a message.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_TASK' if TASK was invalid, `KERN_INVALID_VALUE' if
+ VARIANT was invalid, `KERN_INVALID_NAME' if NAME did not denote a
+ right, `KERN_INVALID_RIGHT' if NAME denoted an invalid right and
+ `KERN_INVALID_CAPABILITY' if NOTIFY was invalid.
+
+ When using `MACH_NOTIFY_PORT_DESTROYED', the function returns
+ `KERN_INVALID_VALUE' if SYNC wasn't zero.
+
+ When using `MACH_NOTIFY_DEAD_NAME', the function returns
+ `KERN_RESOURCE_SHORTAGE' if the kernel ran out of memory,
+ `KERN_INVALID_ARGUMENT' if NAME denotes a dead name, but SYNC is
+ zero or NOTIFY is `MACH_PORT_NULL', and `KERN_UREFS_OVERFLOW' if
+ NAME denotes a dead name, but generating an immediate dead-name
+ notification would overflow the name's user-reference count.
+
+ The `mach_port_request_notification' call is actually an RPC to
+ TASK, normally a send right for a task port, but potentially any
+ send right. In addition to the normal diagnostic return codes
+ from the call's server (normally the kernel), the call may return
+ `mach_msg' return codes.
+
+
+File: mach.info, Node: Virtual Memory Interface, Next: External Memory Management, Prev: Inter Process Communication, Up: Top
+
+5 Virtual Memory Interface
+**************************
+
+ -- Data type: vm_task_t
+ This is a `task_t' (and as such a `mach_port_t'), which holds a
+ port name associated with a port that represents a virtual memory
+ map in the kernel. An virtual memory map is used by the kernel to
+ manage the address space of a task. The virtual memory map
+ doesn't get a port name of its own. Instead the port name of the
+ task provided with the virtual memory is used to name the virtual
+ memory map of the task (as is indicated by the fact that the type
+ of `vm_task_t' is actually `task_t').
+
+ The virtual memory maps of tasks are the only ones accessible
+ outside of the kernel.
+
+* Menu:
+
+* Memory Allocation:: Allocation of new virtual memory.
+* Memory Deallocation:: Freeing unused virtual memory.
+* Data Transfer:: Reading, writing and copying memory.
+* Memory Attributes:: Tweaking memory regions.
+* Mapping Memory Objects:: How to map memory objects.
+* Memory Statistics:: How to get statistics about memory usage.
+
+
+File: mach.info, Node: Memory Allocation, Next: Memory Deallocation, Up: Virtual Memory Interface
+
+5.1 Memory Allocation
+=====================
+
+ -- Function: kern_return_t vm_allocate (vm_task_t TARGET_TASK,
+ vm_address_t *ADDRESS, vm_size_t SIZE, boolean_t ANYWHERE)
+ The function `vm_allocate' allocates a region of virtual memory,
+ placing it in the specified TASK's address space.
+
+ The starting address is ADDRESS. If the ANYWHERE option is false,
+ an attempt is made to allocate virtual memory starting at this
+ virtual address. If this address is not at the beginning of a
+ virtual page, it will be rounded down to one. If there is not
+ enough space at this address, no memory will be allocated. If the
+ ANYWHERE option is true, the input value of this address will be
+ ignored, and the space will be allocated wherever it is available.
+ In either case, the address at which memory was actually
+ allocated will be returned in ADDRESS.
+
+ SIZE is the number of bytes to allocate (rounded by the system in
+ a machine dependent way to an integral number of virtual pages).
+
+ If ANYWHERE is true, the kernel should find and allocate any
+ region of the specified size, and return the address of the
+ resulting region in address address, rounded to a virtual page
+ boundary if there is sufficient space.
+
+ The physical memory is not actually allocated until the new virtual
+ memory is referenced. By default, the kernel rounds all addresses
+ down to the nearest page boundary and all memory sizes up to the
+ nearest page size. The global variable `vm_page_size' contains
+ the page size. `mach_task_self' returns the value of the current
+ task port which should be used as the TARGET_TASK argument in
+ order to allocate memory in the caller's address space. For
+ languages other than C, these values can be obtained by the calls
+ `vm_statistics' and `mach_task_self'. Initially, the pages of
+ allocated memory will be protected to allow all forms of access,
+ and will be inherited in child tasks as a copy. Subsequent calls
+ to `vm_protect' and `vm_inherit' may be used to change these
+ properties. The allocated region is always zero-filled.
+
+ The function returns `KERN_SUCCESS' if the memory was successfully
+ allocated, `KERN_INVALID_ADDRESS' if an invalid address was
+ specified and `KERN_NO_SPACE' if there was not enough space left to
+ satisfy the request.
+
+
+File: mach.info, Node: Memory Deallocation, Next: Data Transfer, Prev: Memory Allocation, Up: Virtual Memory Interface
+
+5.2 Memory Deallocation
+=======================
+
+ -- Function: kern_return_t vm_deallocate (vm_task_t TARGET_TASK,
+ vm_address_t ADDRESS, vm_size_t SIZE)
+ `vm_deallocate' relinquishes access to a region of a TASK's
+ address space, causing further access to that memory to fail. This
+ address range will be available for reallocation. ADDRESS is the
+ starting address, which will be rounded down to a page boundary.
+ SIZE is the number of bytes to deallocate, which will be rounded
+ up to give a page boundary. Note, that because of the rounding to
+ virtual page boundaries, more than SIZE bytes may be deallocated.
+ Use `vm_page_size' or `vm_statistics' to find out the current
+ virtual page size.
+
+ This call may be used to deallocte memory that was passed to a
+ task in a message (via out of line data). In that case, the
+ rounding should cause no trouble, since the region of memory was
+ allocated as a set of pages.
+
+ The `vm_deallocate' call affects only the task specified by the
+ TARGET_TASK. Other tasks which may have access to this memory may
+ continue to reference it.
+
+ The function returns `KERN_SUCCESS' if the memory was successfully
+ deallocated and `KERN_INVALID_ADDRESS' if an invalid or
+ non-allocated address was specified.
+
+
+File: mach.info, Node: Data Transfer, Next: Memory Attributes, Prev: Memory Deallocation, Up: Virtual Memory Interface
+
+5.3 Data Transfer
+=================
+
+ -- Function: kern_return_t vm_read (vm_task_t TARGET_TASK,
+ vm_address_t ADDRESS, vm_size_t SIZE, vm_offset_t *DATA,
+ mach_msg_type_number_t *DATA_COUNT)
+ The function `vm_read' allows one task's virtual memory to be read
+ by another task. The TARGET_TASK is the task whose memory is to
+ be read. ADDRESS is the first address to be read and must be on a
+ page boundary. SIZE is the number of bytes of data to be read and
+ must be an integral number of pages. DATA is the array of data
+ copied from the given task, and DATA_COUNT is the size of the data
+ array in bytes (will be an integral number of pages).
+
+ Note that the data array is returned in a newly allocated region;
+ the task reading the data should `vm_deallocate' this region when
+ it is done with the data.
+
+ The function returns `KERN_SUCCESS' if the memory was successfully
+ read, `KERN_INVALID_ADDRESS' if an invalid or non-allocated address
+ was specified or there was not SIZE bytes of data following the
+ address, `KERN_INVALID_ARGUMENT' if the address does not start on a
+ page boundary or the size is not an integral number of pages,
+ `KERN_PROTECTION_FAILURE' if the address region in the target task
+ is protected against reading and `KERN_NO_SPACE' if there was not
+ enough room in the callers virtual memory to allocate space for
+ the data to be returned.
+
+ -- Function: kern_return_t vm_write (vm_task_t TARGET_TASK,
+ vm_address_t ADDRESS, vm_offset_t DATA,
+ mach_msg_type_number_t DATA_COUNT)
+ The function `vm_write' allows a task to write to the vrtual memory
+ of TARGET_TASK. ADDRESS is the starting address in task to be
+ affected. DATA is an array of bytes to be written, and DATA_COUNT
+ the size of the DATA array.
+
+ The current implementation requires that ADDRESS, DATA and
+ DATA_COUNT all be page-aligned. Otherwise,
+ `KERN_INVALID_ARGUMENT' is returned.
+
+ The function returns `KERN_SUCCESS' if the memory was successfully
+ written, `KERN_INVALID_ADDRESS' if an invalid or non-allocated
+ address was specified or there was not DATA_COUNT bytes of
+ allocated memory starting at ADDRESS and `KERN_PROTECTION_FAILURE'
+ if the address region in the target task is protected against
+ writing.
+
+ -- Function: kern_return_t vm_copy (vm_task_t TARGET_TASK,
+ vm_address_t SOURCE_ADDRESS, vm_size_t COUNT,
+ vm_offset_t DEST_ADDRESS)
+ The function `vm_copy' causes the source memory range to be copied
+ to the destination address. The source and destination memory
+ ranges may overlap. The destination address range must already be
+ allocated and writable; the source range must be readable.
+
+ `vm_copy' is equivalent to `vm_read' followed by `vm_write'.
+
+ The current implementation requires that ADDRESS, DATA and
+ DATA_COUNT all be page-aligned. Otherwise,
+ `KERN_INVALID_ARGUMENT' is returned.
+
+ The function returns `KERN_SUCCESS' if the memory was successfully
+ written, `KERN_INVALID_ADDRESS' if an invalid or non-allocated
+ address was specified or there was insufficient memory allocated
+ at one of the addresses and `KERN_PROTECTION_FAILURE' if the
+ destination region was not writable or the source region was not
+ readable.
+
+
+File: mach.info, Node: Memory Attributes, Next: Mapping Memory Objects, Prev: Data Transfer, Up: Virtual Memory Interface
+
+5.4 Memory Attributes
+=====================
+
+ -- Function: kern_return_t vm_region (vm_task_t TARGET_TASK,
+ vm_address_t *ADDRESS, vm_size_t *SIZE,
+ vm_prot_t *PROTECTION, vm_prot_t *MAX_PROTECTION,
+ vm_inherit_t *INHERITANCE, boolean_t *SHARED,
+ memory_object_name_t *OBJECT_NAME, vm_offset_t *OFFSET)
+ The function `vm_region' returns a description of the specified
+ region of TARGET_TASK's virtual address space. `vm_region' begins
+ at ADDRESS and looks forward through memory until it comes to an
+ allocated region. If address is within a region, then that region
+ is used. Various bits of information about the region are
+ returned. If ADDRESS was not within a region, then ADDRESS is set
+ to the start of the first region which follows the incoming value.
+ In this way an entire address space can be scanned.
+
+ The SIZE returned is the size of the located region in bytes.
+ PROTECTION is the current protection of the region, MAX_PROTECTION
+ is the maximum allowable protection for this region. INHERITANCE
+ is the inheritance attribute for this region. SHARED tells if the
+ region is shared or not. The port OBJECT_NAME identifies the
+ memory object associated with this region, and OFFSET is the
+ offset into the pager object that this region begins at.
+
+ The function returns `KERN_SUCCESS' if the memory region was
+ successfully located and the information returned and
+ `KERN_NO_SPACE' if there is no region at or above ADDRESS in the
+ specified task.
+
+ -- Function: kern_return_t vm_protect (vm_task_t TARGET_TASK,
+ vm_address_t ADDRESS, vm_size_t SIZE, boolean_t SET_MAXIMUM,
+ vm_prot_t NEW_PROTECTION)
+ The function `vm_protect' sets the virtual memory access privileges
+ for a range of allocated addresses in TARGET_TASK's virtual
+ address space. The protection argument describes a combination of
+ read, write, and execute accesses that should be _permitted_.
+
+ ADDRESS is the starting address, which will be rounded down to a
+ page boundary. SIZE is the size in bytes of the region for which
+ protection is to change, and will be rounded up to give a page
+ boundary. If SET_MAXIMUM is set, make the protection change apply
+ to the maximum protection associated with this address range;
+ otherwise, the current protection on this range is changed. If
+ the maximum protection is reduced below the current protection,
+ both will be changed to reflect the new maximum. NEW_PROTECTION
+ is the new protection value for this region; a set of:
+ `VM_PROT_READ', `VM_PROT_WRITE', `VM_PROT_EXECUTE'.
+
+ The enforcement of virtual memory protection is machine-dependent.
+ Nominally read access requires `VM_PROT_READ' permission, write
+ access requires `VM_PROT_WRITE' permission, and execute access
+ requires `VM_PROT_EXECUTE' permission. However, some combinations
+ of access rights may not be supported. In particular, the kernel
+ interface allows write access to require `VM_PROT_READ' and
+ `VM_PROT_WRITE' permission and execute access to require
+ `VM_PROT_READ' permission.
+
+ The function returns `KERN_SUCCESS' if the memory was successfully
+ protected, `KERN_INVALID_ADDRESS' if an invalid or non-allocated
+ address was specified and `KERN_PROTECTION_FAILURE' if an attempt
+ was made to increase the current or maximum protection beyond the
+ existing maximum protection value.
+
+ -- Function: kern_return_t vm_inherit (vm_task_t TARGET_TASK,
+ vm_address_t ADDRESS, vm_size_t SIZE,
+ vm_inherit_t NEW_INHERITANCE)
+ The function `vm_inherit' specifies how a region of TARGET_TASK's
+ address space is to be passed to child tasks at the time of task
+ creation. Inheritance is an attribute of virtual pages, so
+ ADDRESS to start from will be rounded down to a page boundary and
+ SIZE, the size in bytes of the region for wihch inheritance is to
+ change, will be rounded up to give a page boundary. How this
+ memory is to be inherited in child tasks is specified by
+ NEW_INHERITANCE. Inheritance is specified by using one of these
+ following three values:
+
+ `VM_INHERIT_SHARE'
+ Child tasks will share this memory with this task.
+
+ `VM_INHERIT_COPY'
+ Child tasks will receive a copy of this region.
+
+ `VM_INHERIT_NONE'
+ This region will be absent from child tasks.
+
+ Setting `vm_inherit' to `VM_INHERIT_SHARE' and forking a child
+ task is the only way two Mach tasks can share physical memory.
+ Remember that all the theads of a given task share all the same
+ memory.
+
+ The function returns `KERN_SUCCESS' if the memory inheritance was
+ successfully set and `KERN_INVALID_ADDRESS' if an invalid or
+ non-allocated address was specified.
+
+ -- Function: kern_return_t vm_wire (host_priv_t HOST_PRIV,
+ vm_task_t TARGET_TASK, vm_address_t ADDRESS, vm_size_t SIZE,
+ vm_prot_t ACCESS)
+ The function `vm_wire' allows privileged applications to control
+ memory pageability. HOST_PRIV is the privileged host port for the
+ host on which TARGET_TASK resides. ADDRESS is the starting
+ address, which will be rounded down to a page boundary. SIZE is
+ the size in bytes of the region for which protection is to change,
+ and will be rounded up to give a page boundary. ACCESS specifies
+ the types of accesses that must not cause page faults.
+
+ The semantics of a successful `vm_wire' operation are that memory
+ in the specified range will not cause page faults for any accesses
+ included in access. Data memory can be made non-pageable (wired)
+ with a access argument of `VM_PROT_READ | VM_PROT_WRITE'. A
+ special case is that `VM_PROT_NONE' makes the memory pageable.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_HOST' if HOST_PRIV was not the privileged host port,
+ `KERN_INVALID_TASK' if TASK was not a valid task,
+ `KERN_INVALID_VALUE' if ACCESS specified an invalid access mode,
+ `KERN_FAILURE' if some memory in the specified range is not
+ present or has an inappropriate protection value, and
+ `KERN_INVALID_ARGUMENT' if unwiring (ACCESS is `VM_PROT_NONE') and
+ the memory is not already wired.
+
+ The `vm_wire' call is actually an RPC to HOST_PRIV, normally a
+ send right for a privileged host port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return
+ `mach_msg' return codes.
+
+ -- Function: kern_return_t vm_machine_attribute (vm_task_t TASK,
+ vm_address_t ADDRESS, vm_size_t SIZE, vm_prot_t ACCESS,
+ vm_machine_attribute_t ATTRIBUTE,
+ vm_machine_attribute_val_t VALUE)
+ The function `vm_machine_attribute' specifies machine-specific
+ attributes for a VM mapping, such as cachability, migrability,
+ replicability. This is used on machines that allow the user
+ control over the cache (this is the case for MIPS architectures)
+ or placement of memory pages as in NUMA architectures (Non-Uniform
+ Memory Access time) such as the IBM ACE multiprocessor.
+
+ Machine-specific attributes can be consider additions to the
+ machine-independent ones such as protection and inheritance, but
+ they are not guaranteed to be supported by any given machine.
+ Moreover, implementations of Mach on new architectures might find
+ the need for new attribute types and or values besides the ones
+ defined in the initial implementation.
+
+ The types currently defined are
+ `MATTR_CACHE'
+ Controls caching of memory pages
+
+ `MATTR_MIGRATE'
+ Controls migrability of memory pages
+
+ `MATTR_REPLICATE'
+ Controls replication of memory pages
+
+ Corresponding values, and meaning of a specific call to
+ `vm_machine_attribute'
+ `MATTR_VAL_ON'
+ Enables the attribute. Being enabled is the default value
+ for any applicable attribute.
+
+ `MATTR_VAL_OFF'
+ Disables the attribute, making memory non-cached, or
+ non-migratable, or non-replicatable.
+
+ `MATTR_VAL_GET'
+ Returns the current value of the attribute for the memory
+ segment. If the attribute does not apply uniformly to the
+ given range the value returned applies to the initial portion
+ of the segment only.
+
+ `MATTR_VAL_CACHE_FLUSH'
+ Flush the memory pages from the Cache. The size value in
+ this case might be meaningful even if not a multiple of the
+ page size, depending on the implementation.
+
+ `MATTR_VAL_ICACHE_FLUSH'
+ Same as above, applied to the Instruction Cache alone.
+
+ `MATTR_VAL_DCACHE_FLUSH'
+ Same as above, applied to the Data Cache alone.
+
+ The function returns `KERN_SUCCESS' if call succeeded, and
+ `KERN_INVALID_ARGUMENT' if TASK is not a task, or ADDRESS and SIZE
+ do not define a valid address range in task, or ATTRIBUTE is not a
+ valid attribute type, or it is not implemented, or VALUE is not a
+ permissible value for attribute.
+
+
+File: mach.info, Node: Mapping Memory Objects, Next: Memory Statistics, Prev: Memory Attributes, Up: Virtual Memory Interface
+
+5.5 Mapping Memory Objects
+==========================
+
+ -- Function: kern_return_t vm_map (vm_task_t TARGET_TASK,
+ vm_address_t *ADDRESS, vm_size_t SIZE, vm_address_t MASK,
+ boolean_t ANYWHERE, memory_object_t MEMORY_OBJECT,
+ vm_offset_t OFFSET, boolean_t COPY, vm_prot_t CUR_PROTECTION,
+ vm_prot_t MAX_PROTECTION, vm_inherit_t INHERITANCE)
+ The function `vm_map' maps a region of virtual memory at the
+ specified address, for which data is to be supplied by the given
+ memory object, starting at the given offset within that object.
+ In addition to the arguments used in `vm_allocate', the `vm_map'
+ call allows the specification of an address alignment parameter,
+ and of the initial protection and inheritance values.
+
+ If the memory object in question is not currently in use, the
+ kernel will perform a `memory_object_init' call at this time. If
+ the copy parameter is asserted, the specified region of the memory
+ object will be copied to this address space; changes made to this
+ object by other tasks will not be visible in this mapping, and
+ changes made in this mapping will not be visible to others (or
+ returned to the memory object).
+
+ The `vm_map' call returns once the mapping is established.
+ Completion of the call does not require any action on the part of
+ the memory manager.
+
+ Warning: Only memory objects that are provided by bona fide memory
+ managers should be used in the `vm_map' call. A memory manager
+ must implement the memory object interface described elsewhere in
+ this manual. If other ports are used, a thread that accesses the
+ mapped virtual memory may become permanently hung or may receive a
+ memory exception.
+
+ TARGET_TASK is the task to be affected. The starting address is
+ ADDRESS. If the ANYWHERE option is used, this address is ignored.
+ The address actually allocated will be returned in ADDRESS. SIZE
+ is the number of bytes to allocate (rounded by the system in a
+ machine dependent way). The alignment restriction is specified by
+ MASK. Bits asserted in this mask must not be asserted in the
+ address returned. If ANYWHERE is set, the kernel should find and
+ allocate any region of the specified size, and return the address
+ of the resulting region in ADDRESS.
+
+ MEMORY_OBJECT is the port that represents the memory object: used
+ by user tasks in `vm_map'; used by the make requests for data or
+ other management actions. If this port is `MEMORY_OBJECT_NULL',
+ then zero-filled memory is allocated instead. Within a memory
+ object, OFFSET specifes an offset in bytes. This must be page
+ aligned. If COPY is set, the range of the memory object should be
+ copied to the target task, rather than mapped read-write.
+
+ The function returns `KERN_SUCCESS' if the object is mapped,
+ `KERN_NO_SPACE' if no unused region of the task's virtual address
+ space that meets the address, size, and alignment criteria could be
+ found, and `KERN_INVALID_ARGUMENT' if an invalid argument was
+ provided.
+
+
+File: mach.info, Node: Memory Statistics, Prev: Mapping Memory Objects, Up: Virtual Memory Interface
+
+5.6 Memory Statistics
+=====================
+
+ -- Data type: vm_statistics_data_t
+ This structure is returned in VM_STATS by the `vm_statistics'
+ function and provides virtual memory statistics for the system.
+ It has the following members:
+
+ `long pagesize'
+ The page size in bytes.
+
+ `long free_count'
+ The number of free pages.
+
+ `long active_count'
+ The umber of active pages.
+
+ `long inactive_count'
+ The number of inactive pages.
+
+ `long wire_count'
+ The number of pages wired down.
+
+ `long zero_fill_count'
+ The number of zero filled pages.
+
+ `long reactivations'
+ The number of reactivated pages.
+
+ `long pageins'
+ The number of pageins.
+
+ `long pageouts'
+ The number of pageouts.
+
+ `long faults'
+ The number of faults.
+
+ `long cow_faults'
+ The number of copy-on-writes.
+
+ `long lookups'
+ The number of object cache lookups.
+
+ `long hits'
+ The number of object cache hits.
+
+ -- Function: kern_return_t vm_statistics (vm_task_t TARGET_TASK,
+ vm_statistics_data_t *VM_STATS)
+ The function `vm_statistics' returns the statistics about the
+ kernel's use of virtual memory since the kernel was booted.
+ `pagesize' can also be found as a global variable `vm_page_size'
+ which is set at task initialization and remains constant for the
+ life of the task.
+
+
+File: mach.info, Node: External Memory Management, Next: Threads and Tasks, Prev: Virtual Memory Interface, Up: Top
+
+6 External Memory Management
+****************************
+
+* Menu:
+
+* Memory Object Server:: The basics of external memory management.
+* Memory Object Creation:: How new memory objects are created.
+* Memory Object Termination:: How memory objects are terminated.
+* Memory Objects and Data:: Data transfer to and from memory objects.
+* Memory Object Locking:: How memory objects are locked.
+* Memory Object Attributes:: Manipulating attributes of memory objects.
+* Default Memory Manager:: Setting and using the default memory manager.
+
+
+File: mach.info, Node: Memory Object Server, Next: Memory Object Creation, Up: External Memory Management
+
+6.1 Memory Object Server
+========================
+
+ -- Function: boolean_t memory_object_server (msg_header_t *IN_MSG,
+ msg_header_t *OUT_MSG)
+ -- Function: boolean_t memory_object_default_server
+ (msg_header_t *IN_MSG, msg_header_t *OUT_MSG)
+ -- Function: boolean_t seqnos_memory_object_server
+ (msg_header_t *IN_MSG, msg_header_t *OUT_MSG)
+ -- Function: boolean_t seqnos_memory_object_default_server
+ (msg_header_t *IN_MSG, msg_header_t *OUT_MSG)
+ A memory manager is a server task that responds to specific
+ messages from the kernel in order to handle memory management
+ functions for the kernel.
+
+ In order to isolate the memory manager from the specifics of
+ message formatting, the remote procedure call generator produces a
+ procedure, `memory_object_server', to handle a received message.
+ This function does all necessary argument handling, and actually
+ calls one of the following functions: `memory_object_init',
+ `memory_object_data_write', `memory_object_data_return',
+ `memory_object_data_request', `memory_object_data_unlock',
+ `memory_object_lock_completed', `memory_object_copy',
+ `memory_object_terminate'. The *default memory manager* may get
+ two additional requests from the kernel: `memory_object_create'
+ and `memory_object_data_initialize'. The remote procedure call
+ generator produces a procedure `memory_object_default_server' to
+ handle those functions specific to the default memory manager.
+
+ The `seqnos_memory_object_server' and
+ `seqnos_memory_object_default_server' differ from
+ `memory_object_server' and `memory_object_default_server' in that
+ they supply message sequence numbers to the server interfaces.
+ They call the `seqnos_memory_object_*' functions, which complement
+ the `memory_object_*' set of functions.
+
+ The return value from the `memory_object_server' function indicates
+ that the message was appropriate to the memory management interface
+ (returning `TRUE'), or that it could not handle this message
+ (returning `FALSE').
+
+ The IN_MSG argument is the message that has been received from the
+ kernel. The OUT_MSG is a reply message, but this is not used for
+ this server.
+
+ The function returns `TRUE' to indicate that the message in
+ question was applicable to this interface, and that the appropriate
+ routine was called to interpret the message. It returns `FALSE' to
+ indicate that the message did not apply to this interface, and
+ that no other action was taken.
+
+
+File: mach.info, Node: Memory Object Creation, Next: Memory Object Termination, Prev: Memory Object Server, Up: External Memory Management
+
+6.2 Memory Object Creation
+==========================
+
+ -- Function: kern_return_t memory_object_init
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL,
+ memory_object_name_t MEMORY_OBJECT_NAME,
+ vm_size_t MEMORY_OBJECT_PAGE_SIZE)
+ -- Function: kern_return_t seqnos_memory_object_init
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL,
+ memory_object_name_t MEMORY_OBJECT_NAME,
+ vm_size_t MEMORY_OBJECT_PAGE_SIZE)
+ The function `memory_object_init' serves as a notification that the
+ kernel has been asked to map the given memory object into a task's
+ virtual address space. Additionally, it provides a port on which
+ the memory manager may issue cache management requests, and a port
+ which the kernel will use to name this data region. In the event
+ that different each will perform a `memory_object_init' call with
+ new request and name ports. The virtual page size that is used by
+ the calling kernel is included for planning purposes.
+
+ When the memory manager is prepared to accept requests for data
+ for this object, it must call `memory_object_ready' with the
+ attribute. Otherwise the kernel will not process requests on this
+ object. To reject all mappings of this object, the memory manager
+ may use `memory_object_destroy'.
+
+ The argument MEMORY_OBJECT is the port that represents the memory
+ object data, as supplied to the kernel in a `vm_map' call.
+ MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.)
+ MEMORY_OBJECT_NAME is a port used by the kernel to refer to the
+ memory object data in reponse to `vm_region' calls.
+ `memory_object_page_size' is the page size to be used by this
+ kernel. All data sizes in calls involving this kernel must be an
+ integral multiple of the page size. Note that different kernels,
+ indicated by a different `memory_control', may have different page
+ sizes.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+ -- Function: kern_return_t memory_object_ready
+ (memory_object_control_t MEMORY_CONTROL,
+ boolean_t MAY_CACHE_OBJECT,
+ memory_object_copy_strategy_t COPY_STRATEGY)
+ The function `memory_object_ready' informs the kernel that the
+ memory manager is ready to receive data or unlock requests on
+ behalf of the clients. The argument MEMORY_CONTROL is the port,
+ provided by the kernel in a `memory_object_init' call, to which
+ cache management requests may be issued. If MAY_CACHE_OBJECT is
+ set, the kernel may keep data associated with this memory object,
+ even after virtual memory references to it are gone.
+
+ COPY_STRATEGY tells how the kernel should copy regions of the
+ associated memory object. There are three possible caching
+ strategies: `MEMORY_OBJECT_COPY_NONE' which specifies that nothing
+ special should be done when data in the object is copied;
+ `MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager
+ should be notified via a `memory_object_copy' call before any part
+ of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which
+ guarantees that the memory manager does not externally modify the
+ data so that the kernel can use its normal copy-on-write
+ algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most
+ commonly used.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+
+File: mach.info, Node: Memory Object Termination, Next: Memory Objects and Data, Prev: Memory Object Creation, Up: External Memory Management
+
+6.3 Memory Object Termination
+=============================
+
+ -- Function: kern_return_t memory_object_terminate
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL,
+ memory_object_name_t MEMORY_OBJECT_NAME)
+ -- Function: kern_return_t seqnos_memory_object_terminate
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL,
+ memory_object_name_t MEMORY_OBJECT_NAME)
+ The function `memory_object_terminate' indicates that the kernel
+ has completed its use of the given memory object. All rights to
+ the memory object control and name ports are included, so that the
+ memory manager can destroy them (using `mach_port_deallocate')
+ after doing appropriate bookkeeping. The kernel will terminate a
+ memory object only after all address space mappings of that memory
+ object have been deallocated, or upon explicit request by the
+ memory manager.
+
+ The argument MEMORY_OBJECT is the port that represents the memory
+ object data, as supplied to the kernel in a `vm_map' call.
+ MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.)
+ MEMORY_OBJECT_NAME is a port used by the kernel to refer to the
+ memory object data in reponse to `vm_region' calls.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+ -- Function: kern_return_t memory_object_destroy
+ (memory_object_control_t MEMORY_CONTROL, kern_return_t REASON)
+ The function `memory_object_destroy' tells the kernel to shut down
+ the memory object. As a result of this call the kernel will no
+ longer support paging activity or any `memory_object' calls on this
+ object, and all rights to the memory object port, the memory
+ control port and the memory name port will be returned to the
+ memory manager in a memory_object_terminate call. If the memory
+ manager is concerned that any modified cached data be returned to
+ it before the object is terminated, it should call
+ `memory_object_lock_request' with SHOULD_FLUSH set and a lock
+ value of `VM_PROT_WRITE' before making this call.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. REASON is an error code indicating why the object must
+ be destroyed.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+
+File: mach.info, Node: Memory Objects and Data, Next: Memory Object Locking, Prev: Memory Object Termination, Up: External Memory Management
+
+6.4 Memory Objects and Data
+===========================
+
+ -- Function: kern_return_t memory_object_data_return
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t DATA, vm_size_t DATA_COUNT, boolean_t DIRTY,
+ boolean_t KERNEL_COPY)
+ -- Function: kern_return_t seqnos_memory_object_data_return
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t DATA, vm_size_t DATA_COUNT, boolean_t DIRTY,
+ boolean_t KERNEL_COPY)
+ The function `memory_object_data_return' provides the memory
+ manager with data that has been modified while cached in physical
+ memory. Once the memory manager no longer needs this data (e.g.,
+ it has been written to another storage medium), it should be
+ deallocated using `vm_deallocate'.
+
+ The argument MEMORY_OBJECT is the port that represents the memory
+ object data, as supplied to the kernel in a `vm_map' call.
+ MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.) OFFSET is
+ the offset within a memory object to which this call refers. This
+ will be page aligned. DATA is the data which has been modified
+ while cached in physical memory. DATA_COUNT is the amount of data
+ to be written, in bytes. This will be an integral number of
+ memory object pages.
+
+ The kernel will also use this call to return precious pages. If an
+ unmodified precious age is returned, DIRTY is set to `FALSE',
+ otherwise it is `TRUE'. If KERNEL_COPY is `TRUE', the kernel kept
+ a copy of the page. Precious data remains precious if the kernel
+ keeps a copy. The indication that the kernel kept a copy is only
+ a hint if the data is not precious; the cleaned copy may be
+ discarded without further notifying the manager.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+ -- Function: kern_return_t memory_object_data_request
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t LENGTH, vm_prot_t DESIRED_ACCESS)
+ -- Function: kern_return_t seqnos_memory_object_data_request
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t LENGTH, vm_prot_t DESIRED_ACCESS)
+ The function `memory_object_data_request' is a request for data
+ from the specified memory object, for at least the access
+ specified. The memory manager is expected to return at least the
+ specified data, with as much access as it can allow, using
+ `memory_object_data_supply'. If the memory manager is unable to
+ provide the data (for example, because of a hardware error), it
+ may use the `memory_object_data_error' call. The
+ `memory_object_data_unavailable' call may be used to tell the
+ kernel to supply zero-filled memory for this region.
+
+ The argument MEMORY_OBJECT is the port that represents the memory
+ object data, as supplied to the kernel in a `vm_map' call.
+ MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.) OFFSET is
+ the offset within a memory object to which this call refers. This
+ will be page aligned. LENGTH is the number of bytes of data,
+ starting at OFFSET, to which this call refers. This will be an
+ integral number of memory object pages. DESIRED_ACCESS is a
+ protection value describing the memory access modes which must be
+ permitted on the specified cached data. One or more of:
+ `VM_PROT_READ', `VM_PROT_WRITE' or `VM_PROT_EXECUTE'.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+ -- Function: kern_return_t memory_object_data_supply
+ (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t DATA, vm_size_t DATA_COUNT, vm_prot_t LOCK_VALUE,
+ boolean_t PRECIOUS, mach_port_t REPLY)
+ The function `memory_object_data_supply' supplies the kernel with
+ data for the specified memory object. Ordinarily, memory managers
+ should only provide data in reponse to `memory_object_data_request'
+ calls from the kernel (but they may provide data in advance as
+ desired). When data already held by this kernel is provided
+ again, the new data is ignored. The kernel may not provide any
+ data (or protection) consistency among pages with different
+ virtual page alignments within the same object.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. OFFSET is an offset within a memory object in bytes.
+ This must be page aligned. DATA is the data that is being
+ provided to the kernel. This is a pointer to the data.
+ DATA_COUNT is the amount of data to be provided. Only whole
+ virtual pages of data can be accepted; partial pages will be
+ discarded.
+
+ LOCK_VALUE is a protection value indicating those forms of access
+ that should *not* be permitted to the specified cached data. The
+ lock values must be one or more of the set: `VM_PROT_NONE',
+ `VM_PROT_READ', `VM_PROT_WRITE', `VM_PROT_EXECUTE' and
+ `VM_PROT_ALL' as defined in `mach/vm_prot.h'.
+
+ If PRECIOUS is `FALSE', the kernel treats the data as a temporary
+ and may throw it away if it hasn't been changed. If the PRECIOUS
+ value is `TRUE', the kernel treats its copy as a data repository
+ and promises to return it to the manager; the manager may tell the
+ kernel to throw it away instead by flushing and not cleaning the
+ data (see `memory_object_lock_request').
+
+ If REPLY_TO is not `MACH_PORT_NULL', the kernel will send a
+ completion message to the provided port (see
+ `memory_object_supply_completed').
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+ -- Function: kern_return_t memory_object_supply_completed
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t LENGTH, kern_return_t RESULT,
+ vm_offset_t ERROR_OFFSET)
+ -- Function: kern_return_t seqnos_memory_object_supply_completed
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t LENGTH, kern_return_t RESULT,
+ vm_offset_t ERROR_OFFSET)
+ The function `memory_object_supply_completed' indicates that a
+ previous `memory_object_data_supply' has been completed. Note that
+ this call is made on whatever port was specified in the
+ `memory_object_data_supply' call; that port need not be the memory
+ object port itself. No reply is expected after this call.
+
+ The argument MEMORY_OBJECT is the port that represents the memory
+ object data, as supplied to the kernel in a `vm_map' call.
+ MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.) OFFSET is
+ the offset within a memory object to which this call refers.
+ LENGTH is the length of the data covered by the lock request. The
+ RESULT parameter indicates what happened during the supply. If it
+ is not `KERN_SUCCESS', then ERROR_OFFSET identifies the first
+ offset at which a problem occurred. The pagein operation stopped
+ at this point. Note that the only failures reported by this
+ mechanism are `KERN_MEMORY_PRESENT'. All other failures (invalid
+ argument, error on pagein of supplied data in manager's address
+ space) cause the entire operation to fail.
+
+
+ -- Function: kern_return_t memory_object_data_error
+ (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t SIZE, kern_return_t REASON)
+ The function `memory_object_data_error' indicates that the memory
+ manager cannot return the data requested for the given region,
+ specifying a reason for the error. This is typically used when a
+ hardware error is encountered.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. OFFSET is an offset within a memory object in bytes.
+ This must be page aligned. DATA is the data that is being
+ provided to the kernel. This is a pointer to the data. SIZE is
+ the amount of cached data (starting at OFFSET) to be handled.
+ This must be an integral number of the memory object page size.
+ REASON is an error code indicating what type of error occured.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+ -- Function: kern_return_t memory_object_data_unavailable
+ (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t SIZE, kern_return_t REASON)
+ The function `memory_object_data_unavailable' indicates that the
+ memory object does not have data for the given region and that the
+ kernel should provide the data for this range. The memory manager
+ may use this call in three different situations.
+
+ 1. The object was created by `memory_object_create' and the
+ kernel has not yet provided data for this range (either via a
+ `memory_object_data_initialize', `memory_object_data_write' or
+ a `memory_object_data_return' for the object.
+
+ 2. The object was created by an `memory_object_data_copy' and the
+ kernel should copy this region from the original memory
+ object.
+
+ 3. The object is a normal user-created memory object and the
+ kernel should supply unlocked zero-filled pages for the range.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. OFFSET is an offset within a memory object, in bytes.
+ This must be page aligned. SIZE is the amount of cached data
+ (starting at OFFSET) to be handled. This must be an integral
+ number of the memory object page size.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+ -- Function: kern_return_t memory_object_copy
+ (memory_object_t OLD_MEMORY_OBJECT,
+ memory_object_control_t OLD_MEMORY_CONTROL,
+ vm_offset_t OFFSET, vm_size_t LENGTH,
+ memory_object_t NEW_MEMORY_OBJECT)
+ -- Function: kern_return_t seqnos_memory_object_copy
+ (memory_object_t OLD_MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t OLD_MEMORY_CONTROL,
+ vm_offset_t OFFSET, vm_size_t LENGTH,
+ memory_object_t NEW_MEMORY_OBJECT)
+ The function `memory_object_copy' indicates that a copy has been
+ made of the specified range of the given original memory object.
+ This call includes only the new memory object itself; a
+ `memory_object_init' call will be made on the new memory object
+ after the currently cached pages of the original object are
+ prepared. After the memory manager receives the init call, it
+ must reply with the `memory_object_ready' call to assert the
+ "ready" attribute. The kernel will use the new memory object,
+ control and name ports to refer to the new copy.
+
+ This call is made when the original memory object had the caching
+ parameter set to `MEMORY_OBJECT_COPY_CALL' and a user of the object
+ has asked the kernel to copy it.
+
+ Cached pages from the original memory object at the time of the
+ copy operation are handled as follows: Readable pages may be
+ silently copied to the new memory object (with all access
+ permissions). Pages not copied are locked to prevent write access.
+
+ The new memory object is *temporary*, meaning that the memory
+ manager should not change its contents or allow the memory object
+ to be mapped in another client. The memory manager may use the
+ `memory_object_data_unavailable' call to indicate that the
+ appropriate pages of the original memory object may be used to
+ fulfill the data request.
+
+ The argument OLD_MEMORY_OBJECT is the port that represents the old
+ memory object data. OLD_MEMORY_CONTROL is the kernel port for the
+ old object. OFFSET is the offset within a memory object to which
+ this call refers. This will be page aligned. LENGTH is the
+ number of bytes of data, starting at OFFSET, to which this call
+ refers. This will be an integral number of memory object pages.
+ NEW_MEMORY_OBJECT is a new memory object created by the kernel;
+ see synopsis for further description. Note that all port rights
+ (including receive rights) are included for the new memory object.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+ The remaining interfaces in this section are obsolet.
+
+ -- Function: kern_return_t memory_object_data_write
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t DATA, vm_size_t DATA_COUNT)
+ -- Function: kern_return_t seqnos_memory_object_data_write
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t DATA, vm_size_t DATA_COUNT)
+ The function `memory_object_data_write' provides the memory manager
+ with data that has been modified while cached in physical memory.
+ It is the old form of `memory_object_data_return'. Once the
+ memory manager no longer needs this data (e.g., it has been written
+ to another storage medium), it should be deallocated using
+ `vm_deallocate'.
+
+ The argument MEMORY_OBJECT is the port that represents the memory
+ object data, as supplied to the kernel in a `vm_map' call.
+ MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.) OFFSET is
+ the offset within a memory object to which this call refers. This
+ will be page aligned. DATA is the data which has been modified
+ while cached in physical memory. DATA_COUNT is the amount of data
+ to be written, in bytes. This will be an integral number of
+ memory object pages.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+ -- Function: kern_return_t memory_object_data_provided
+ (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t DATA, vm_size_t DATA_COUNT, vm_prot_t LOCK_VALUE)
+ The function `memory_object_data_provided' supplies the kernel with
+ data for the specified memory object. It is the old form of
+ `memory_object_data_supply'. Ordinarily, memory managers should
+ only provide data in reponse to `memory_object_data_request' calls
+ from the kernel. The LOCK_VALUE specifies what type of access
+ will not be allowed to the data range. The lock values must be
+ one or more of the set: `VM_PROT_NONE', `VM_PROT_READ',
+ `VM_PROT_WRITE', `VM_PROT_EXECUTE' and `VM_PROT_ALL' as defined in
+ `mach/vm_prot.h'.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. OFFSET is an offset within a memory object in bytes.
+ This must be page aligned. DATA is the data that is being
+ provided to the kernel. This is a pointer to the data.
+ DATA_COUNT is the amount of data to be provided. This must be an
+ integral number of memory object pages. LOCK_VALUE is a
+ protection value indicating those forms of access that should
+ *not* be permitted to the specified cached data.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+
+File: mach.info, Node: Memory Object Locking, Next: Memory Object Attributes, Prev: Memory Objects and Data, Up: External Memory Management
+
+6.5 Memory Object Locking
+=========================
+
+ -- Function: kern_return_t memory_object_lock_request
+ (memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t SIZE, memory_object_return_t SHOULD_CLEAN,
+ boolean_t SHOULD_FLUSH, vm_prot_t LOCK_VALUE,
+ mach_port_t REPLY_TO)
+ The function `memory_object_lock_request' allows a memory manager
+ to make cache management requests. As specified in arguments to
+ the call, the kernel will:
+ * clean (i.e., write back using `memory_object_data_supply' or
+ `memory_object_data_write') any cached data which has been
+ modified since the last time it was written
+
+ * flush (i.e., remove any uses of) that data from memory
+
+ * lock (i.e., prohibit the specified uses of) the cached data
+
+ Locks applied to cached data are not cumulative; new lock values
+ override previous ones. Thus, data may also be unlocked using this
+ primitive. The lock values must be one or more of the following
+ values: `VM_PROT_NONE', `VM_PROT_READ', `VM_PROT_WRITE',
+ `VM_PROT_EXECUTE' and `VM_PROT_ALL' as defined in `mach/vm_prot.h'.
+
+ Only data which is cached at the time of this call is affected.
+ When a running thread requires a prohibited access to cached data,
+ the kernel will issue a `memory_object_data_unlock' call
+ specifying the forms of access required.
+
+ Once all of the actions requested by this call have been
+ completed, the kernel issues a `memory_object_lock_completed' call
+ on the specified reply port.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. OFFSET is an offset within a memory object, in bytes.
+ This must be page aligned. SIZE is the amount of cached data
+ (starting at OFFSET) to be handled. This must be an integral
+ number of the memory object page size. If SHOULD_CLEAN is set,
+ modified data should be written back to the memory manager. If
+ SHOULD_FLUSH is set, the specified cached data should be
+ invalidated, and all uses of that data should be revoked.
+ LOCK_VALUE is a protection value indicating those forms of access
+ that should *not* be permitted to the specified cached data.
+ REPLY_TO is a port on which a `memory_object_lock_comleted' call
+ should be issued, or `MACH_PORT_NULL' if no acknowledgement is
+ desired.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+ -- Function: kern_return_t memory_object_lock_completed
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t LENGTH)
+ -- Function: kern_return_t seqnos_memory_object_lock_completed
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t LENGTH)
+ The function `memory_object_lock_completed' indicates that a
+ previous `memory_object_lock_request' has been completed. Note
+ that this call is made on whatever port was specified in the
+ `memory_object_lock_request' call; that port need not be the memory
+ object port itself. No reply is expected after this call.
+
+ The argument MEMORY_OBJECT is the port that represents the memory
+ object data, as supplied to the kernel in a `vm_map' call.
+ MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.) OFFSET is
+ the offset within a memory object to which this call refers.
+ LENGTH is the length of the data covered by the lock request.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+ -- Function: kern_return_t memory_object_data_unlock
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t LENGTH, vm_prot_t DESIRED_ACCESS)
+ -- Function: kern_return_t seqnos_memory_object_data_unlock
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_size_t LENGTH, vm_prot_t DESIRED_ACCESS)
+ The function `memory_object_data_unlock' is a request that the
+ memory manager permit at least the desired access to the specified
+ data cached by the kernel. A call to `memory_object_lock_request'
+ is expected in response.
+
+ The argument MEMORY_OBJECT is the port that represents the memory
+ object data, as supplied to the kernel in a `vm_map' call.
+ MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.) OFFSET is
+ the offset within a memory object to which this call refers. This
+ will be page aligned. LENGTH is the number of bytes of data,
+ starting at OFFSET, to which this call refers. This will be an
+ integral number of memory object pages. DESIRED_ACCESS a
+ protection value describing the memory access modes which must be
+ permitted on the specified cached data. One or more of:
+ `VM_PROT_READ', `VM_PROT_WRITE' or `VM_PROT_EXECUTE'.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+
+File: mach.info, Node: Memory Object Attributes, Next: Default Memory Manager, Prev: Memory Object Locking, Up: External Memory Management
+
+6.6 Memory Object Attributes
+============================
+
+ -- Function: kern_return_t memory_object_get_attributes
+ (memory_object_control_t MEMORY_CONTROL,
+ boolean_t *OBJECT_READY, boolean_t *MAY_CACHE_OBJECT,
+ memory_object_copy_strategy_t *COPY_STRATEGY)
+ The function `memory_object_get_attribute' retrieves the current
+ attributes associated with the memory object.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. If OBJECT_READY is set, the kernel may issue new data
+ and unlock requests on the associated memory object. If
+ MAY_CACHE_OBJECT is set, the kernel may keep data associated with
+ this memory object, even after virtual memory references to it are
+ gone. COPY_STRATEGY tells how the kernel should copy regions of
+ the associated memory object.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+ -- Function: kern_return_t memory_object_change_attributes
+ (memory_object_control_t MEMORY_CONTROL,
+ boolean_t MAY_CACHE_OBJECT,
+ memory_object_copy_strategy_t COPY_STRATEGY,
+ mach_port_t REPLY_TO)
+ The function `memory_object_change_attribute' sets
+ performance-related attributes for the specified memory object.
+ If the caching attribute is asserted, the kernel is permitted (and
+ encouraged) to maintain cached data for this memory object even
+ after no virtual address space contains this data.
+
+ There are three possible caching strategies:
+ `MEMORY_OBJECT_COPY_NONE' which specifies that nothing special
+ should be done when data in the object is copied;
+ `MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager
+ should be notified via a `memory_object_copy' call before any part
+ of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which
+ guarantees that the memory manager does not externally modify the
+ data so that the kernel can use its normal copy-on-write
+ algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most
+ commonly used.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. If MAY_CACHE_OBJECT is set, the kernel may keep data
+ associated with this memory object, even after virtual memory
+ references to it are gone. COPY_STRATEGY tells how the kernel
+ should copy regions of the associated memory object. REPLY_TO is
+ a port on which a `memory_object_change_comleted' call will be
+ issued upon completion of the attribute change, or
+ `MACH_PORT_NULL' if no acknowledgement is desired.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+ -- Function: kern_return_t memory_object_change_completed
+ (memory_object_t MEMORY_OBJECT, boolean_t MAY_CACHE_OBJECT,
+ memory_object_copy_strategy_t COPY_STRATEGY)
+ -- Function: kern_return_t seqnos_memory_object_change_completed
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ boolean_t MAY_CACHE_OBJECT,
+ memory_object_copy_strategy_t COPY_STRATEGY)
+ The function `memory_object_change_completed' indicates the
+ completion of an attribute change call.
+
+
+ The following interface is obsoleted by `memory_object_ready' and
+`memory_object_change_attributes'. If the old form
+`memory_object_set_attributes' is used to make a memory object ready,
+the kernel will write back data using the old
+`memory_object_data_write' interface rather than
+`memory_object_data_return'..
+
+ -- Function: kern_return_t memory_object_set_attributes
+ (memory_object_control_t MEMORY_CONTROL,
+ boolean OBJECT_READY, boolean_t MAY_CACHE_OBJECT,
+ memory_object_copy_strategy_t COPY_STRATEGY)
+ The function `memory_object_set_attribute' controls how the the
+ memory object. The kernel will only make data or unlock requests
+ when the ready attribute is asserted. If the caching attribute is
+ asserted, the kernel is permitted (and encouraged) to maintain
+ cached data for this memory object even after no virtual address
+ space contains this data.
+
+ There are three possible caching strategies:
+ `MEMORY_OBJECT_COPY_NONE' which specifies that nothing special
+ should be done when data in the object is copied;
+ `MEMORY_OBJECT_COPY_CALL' which specifies that the memory manager
+ should be notified via a `memory_object_copy' call before any part
+ of the object is copied; and `MEMORY_OBJECT_COPY_DELAY' which
+ guarantees that the memory manager does not externally modify the
+ data so that the kernel can use its normal copy-on-write
+ algorithms. `MEMORY_OBJECT_COPY_DELAY' is the strategy most
+ commonly used.
+
+ The argument MEMORY_CONTROL is the port, provided by the kernel in
+ a `memory_object_init' call, to which cache management requests may
+ be issued. If OBJECT_READY is set, the kernel may issue new data
+ and unlock requests on the associated memory object. If
+ MAY_CACHE_OBJECT is set, the kernel may keep data associated with
+ this memory object, even after virtual memory references to it are
+ gone. COPY_STRATEGY tells how the kernel should copy regions of
+ the associated memory object.
+
+ This routine does not receive a reply message (and consequently
+ has no return value), so only message transmission errors apply.
+
+
+File: mach.info, Node: Default Memory Manager, Prev: Memory Object Attributes, Up: External Memory Management
+
+6.7 Default Memory Manager
+==========================
+
+ -- Function: kern_return_t vm_set_default_memory_manager (host_t HOST,
+ mach_port_t *DEFAULT_MANAGER)
+ The function `vm_set_default_memory_manager' sets the kernel's
+ default memory manager. It sets the port to which newly-created
+ temporary memory objects are delivered by `memory_object_create' to
+ the host. The old memory manager port is returned. If
+ DEFAULT_MANAGER is `MACH_PORT_NULL' then this routine just returns
+ the current default manager port without changing it.
+
+ The argument HOST is a task port to the kernel whose default
+ memory manager is to be changed. DEFAULT_MANAGER is an in/out
+ parameter. As input, DEFAULT_MANAGER is the port that the new
+ memory manager is listening on for `memory_object_create' calls.
+ As output, it is the old default memory manager's port.
+
+ The function returns `KERN_SUCCESS' if the new memory manager is
+ installed, and `KERN_INVALID_ARGUMENT' if this task does not have
+ the privileges required for this call.
+
+ -- Function: kern_return_t memory_object_create
+ (memory_object_t OLD_MEMORY_OBJECT,
+ memory_object_t NEW_MEMORY_OBJECT, vm_size_t NEW_OBJECT_SIZE,
+ memory_object_control_t NEW_CONTROL,
+ memory_object_name_t NEW_NAME, vm_size_t NEW_PAGE_SIZE)
+ -- Function: kern_return_t seqnos_memory_object_create
+ (memory_object_t OLD_MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_t NEW_MEMORY_OBJECT, vm_size_t NEW_OBJECT_SIZE,
+ memory_object_control_t NEW_CONTROL,
+ memory_object_name_t NEW_NAME, vm_size_t NEW_PAGE_SIZE)
+ The function `memory_object_create' is a request that the given
+ memory manager accept responsibility for the given memory object
+ created by the kernel. This call will only be made to the system
+ *default memory manager*. The memory object in question initially
+ consists of zero-filled memory; only memory pages that are
+ actually written will ever be provided to
+ `memory_object_data_request' calls, the default memory manager must
+ use `memory_object_data_unavailable' for any pages that have not
+ previously been written.
+
+ No reply is expected after this call. Since this call is directed
+ to the default memory manager, the kernel assumes that it will be
+ ready to handle data requests to this object and does not need the
+ confirmation of a `memory_object_set_attributes' call.
+
+ The argument OLD_MEMORY_OBJECT is a memory object provided by the
+ default memory manager on which the kernel can make
+ `memory_object_create' calls. NEW_MEMORY_OBJECT is a new memory
+ object created by the kernel; see synopsis for further
+ description. Note that all port rights (including receive rights)
+ are included for the new memory object. NEW_OBJECT_SIZE is the
+ maximum size of the new object. NEW_CONTROL is a port, created by
+ the kernel, on which a memory manager may issue cache management
+ requests for the new object. NEW_NAME a port used by the kernel
+ to refer to the new memory object data in response to `vm_region'
+ calls. NEW_PAGE_SIZE is the page size to be used by this kernel.
+ All data sizes in calls involving this kernel must be an integral
+ multiple of the page size. Note that different kernels, indicated
+ by different a `memory_control', may have different page sizes.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+ -- Function: kern_return_t memory_object_data_initialize
+ (memory_object_t MEMORY_OBJECT,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t DATA, vm_size_t DATA_COUNT)
+ -- Function: kern_return_t seqnos_memory_object_data_initialize
+ (memory_object_t MEMORY_OBJECT, mach_port_seqno_t SEQNO,
+ memory_object_control_t MEMORY_CONTROL, vm_offset_t OFFSET,
+ vm_offset_t DATA, vm_size_t DATA_COUNT)
+ The function `memory_object_data_initialize' provides the memory
+ manager with initial data for a kernel-created memory object. If
+ the memory manager already has been supplied data (by a previous
+ `memory_object_data_initialize', `memory_object_data_write' or
+ `memory_object_data_return'), then this data should be ignored.
+ Otherwise, this call behaves exactly as does
+ `memory_object_data_return' on memory objects created by the kernel
+ via `memory_object_create' and thus will only be made to default
+ memory managers. This call will not be made on objects created via
+ `memory_object_copy'.
+
+ The argument MEMORY_OBJECT the port that represents the memory
+ object data, as supplied by the kernel in a `memory_object_create'
+ call. MEMORY_CONTROL is the request port to which a response is
+ requested. (In the event that a memory object has been supplied
+ to more than one the kernel that has made the request.) OFFSET is
+ the offset within a memory object to which this call refers. This
+ will be page aligned. DATA os the data which has been modified
+ while cached in physical memory. DATA_COUNT is the amount of data
+ to be written, in bytes. This will be an integral number of
+ memory object pages.
+
+ The function should return `KERN_SUCCESS', but since this routine
+ is called by the kernel, which does not wait for a reply message,
+ this value is ignored.
+
+
+File: mach.info, Node: Threads and Tasks, Next: Host Interface, Prev: External Memory Management, Up: Top
+
+7 Threads and Tasks
+*******************
+
+* Menu:
+
+* Thread Interface:: Manipulating threads.
+* Task Interface:: Manipulating tasks.
+* Profiling:: Profiling threads and tasks.
+
+
+File: mach.info, Node: Thread Interface, Next: Task Interface, Up: Threads and Tasks
+
+7.1 Thread Interface
+====================
+
+ -- Data type: thread_t
+ This is a `mach_port_t' and used to hold the port name of a thread
+ port that represents the thread. Manipulations of the thread are
+ implemented as remote procedure calls to the thread port. A
+ thread can get a port to itself with the `mach_thread_self' system
+ call.
+
+* Menu:
+
+* Thread Creation:: Creating new threads.
+* Thread Termination:: Terminating existing threads.
+* Thread Information:: How to get informations on threads.
+* Thread Settings:: How to set threads related informations.
+* Thread Execution:: How to control the thread's machine state.
+* Scheduling:: Operations on thread scheduling.
+* Thread Special Ports:: How to handle the thread's special ports.
+* Exceptions:: Managing exceptions.
+
+
+File: mach.info, Node: Thread Creation, Next: Thread Termination, Up: Thread Interface
+
+7.1.1 Thread Creation
+---------------------
+
+ -- Function: kern_return_t thread_create (task_t PARENT_TASK,
+ thread_t *CHILD_THREAD)
+ The function `thread_create' creates a new thread within the task
+ specified by PARENT_TASK. The new thread has no processor state,
+ and has a suspend count of 1. To get a new thread to run, first
+ `thread_create' is called to get the new thread's identifier,
+ (CHILD_THREAD). Then `thread_set_state' is called to set a
+ processor state, and finally `thread_resume' is called to get the
+ thread scheduled to execute.
+
+ When the thread is created send rights to its thread kernel port
+ are given to it and returned to the caller in CHILD_THREAD. The
+ new thread's exception port is set to `MACH_PORT_NULL'.
+
+ The function returns `KERN_SUCCESS' if a new thread has been
+ created, `KERN_INVALID_ARGUMENT' if PARENT_TASK is not a valid
+ task and `KERN_RESOURCE_SHORTAGE' if some critical kernel resource
+ is not available.
+
+
+File: mach.info, Node: Thread Termination, Next: Thread Information, Prev: Thread Creation, Up: Thread Interface
+
+7.1.2 Thread Termination
+------------------------
+
+ -- Function: kern_return_t thread_terminate (thread_t TARGET_THREAD)
+ The function `thread_terminate' destroys the thread specified by
+ TARGET_THREAD.
+
+ The function returns `KERN_SUCCESS' if the thread has been killed
+ and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread.
+
+
+File: mach.info, Node: Thread Information, Next: Thread Settings, Prev: Thread Termination, Up: Thread Interface
+
+7.1.3 Thread Information
+------------------------
+
+ -- Function: thread_t mach_thread_self ()
+ The `mach_thread_self' system call returns the calling thread's
+ thread port.
+
+ `mach_thread_self' has an effect equivalent to receiving a send
+ right for the thread port. `mach_thread_self' returns the name of
+ the send right. In particular, successive calls will increase the
+ calling task's user-reference count for the send right.
+
+ As a special exception, the kernel will overrun the user reference
+ count of the thread name port, so that this function can not fail
+ for that reason. Because of this, the user should not deallocate
+ the port right if an overrun might have happened. Otherwise the
+ reference count could drop to zero and the send right be destroyed
+ while the user still expects to be able to use it. As the kernel
+ does not make use of the number of extant send rights anyway, this
+ is safe to do (the thread port itself is not destroyed, even when
+ there are no send rights anymore).
+
+ The function returns `MACH_PORT_NULL' if a resource shortage
+ prevented the reception of the send right or if the thread port is
+ currently null and `MACH_PORT_DEAD' if the thread port is currently
+ dead.
+
+ -- Function: kern_return_t thread_info (thread_t TARGET_THREAD,
+ int FLAVOR, thread_info_t THREAD_INFO,
+ mach_msg_type_number_t *THREAD_INFOCNT)
+ The function `thread_info' returns the selected information array
+ for a thread, as specified by FLAVOR.
+
+ THREAD_INFO is an array of integers that is supplied by the caller
+ and returned filled with specified information. THREAD_INFOCNT is
+ supplied as the maximum number of integers in THREAD_INFO. On
+ return, it contains the actual number of integers in THREAD_INFO.
+ The maximum number of integers returned by any flavor is
+ `THREAD_INFO_MAX'.
+
+ The type of information returned is defined by FLAVOR, which can
+ be one of the following:
+
+ `THREAD_BASIC_INFO'
+ The function returns basic information about the thread, as
+ defined by `thread_basic_info_t'. This includes the user and
+ system time, the run state, and scheduling priority. The
+ number of integers returned is `THREAD_BASIC_INFO_COUNT'.
+
+ `THREAD_SCHED_INFO'
+ The function returns information about the schduling policy
+ for the thread as defined by `thread_sched_info_t'. The
+ number of integers returned is `THREAD_SCHED_INFO_COUNT'.
+
+ The function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or FLAVOR
+ is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if
+ the returned info array is too large for THREAD_INFO. In this
+ case, THREAD_INFO is filled as much as possible and THREAD_INFOCNT
+ is set to the number of elements that would have been returned if
+ there were enough room.
+
+ -- Data type: struct thread_basic_info
+ This structure is returned in THREAD_INFO by the `thread_info'
+ function and provides basic information about the thread. You can
+ cast a variable of type `thread_info_t' to a pointer of this type
+ if you provided it as the THREAD_INFO parameter for the
+ `THREAD_BASIC_INFO' flavor of `thread_info'. It has the following
+ members:
+
+ `time_value_t user_time'
+ user run time
+
+ `time_value_t system_time'
+ system run time
+
+ `int cpu_usage'
+ Scaled cpu usage percentage. The scale factor is
+ `TH_USAGE_SCALE'.
+
+ `int base_priority'
+ The base scheduling priority of the thread.
+
+ `int cur_priority'
+ The current scheduling priority of the thread.
+
+ `integer_t run_state'
+ The run state of the thread. The possible vlues of this
+ field are:
+ `TH_STATE_RUNNING'
+ The thread is running normally.
+
+ `TH_STATE_STOPPED'
+ The thread is suspended.
+
+ `TH_STATE_WAITING'
+ The thread is waiting normally.
+
+ `TH_STATE_UNINTERRUPTIBLE'
+ The thread is in an uninterruptible wait.
+
+ `TH_STATE_HALTED'
+ The thread is halted at a clean point.
+
+ `flags'
+ Various flags. The possible values of this field are:
+ `TH_FLAGS_SWAPPED'
+ The thread is swapped out.
+
+ `TH_FLAGS_IDLE'
+ The thread is an idle thread.
+
+ `int suspend_count'
+ The suspend count for the thread.
+
+ `int sleep_time'
+ The number of seconds that the thread has been sleeping.
+
+ `time_value_t creation_time'
+ The time stamp of creation.
+
+ -- Data type: thread_basic_info_t
+ This is a pointer to a `struct thread_basic_info'.
+
+ -- Data type: struct thread_sched_info
+ This structure is returned in THREAD_INFO by the `thread_info'
+ function and provides schedule information about the thread. You
+ can cast a variable of type `thread_info_t' to a pointer of this
+ type if you provided it as the THREAD_INFO parameter for the
+ `THREAD_SCHED_INFO' flavor of `thread_info'. It has the following
+ members:
+
+ `int policy'
+ The scheduling policy of the thread, *Note Scheduling
+ Policy::.
+
+ `integer_t data'
+ Policy-dependent scheduling information, *Note Scheduling
+ Policy::.
+
+ `int base_priority'
+ The base scheduling priority of the thread.
+
+ `int max_priority'
+ The maximum scheduling priority of the thread.
+
+ `int cur_priority'
+ The current scheduling priority of the thread.
+
+ `int depressed'
+ `TRUE' if the thread is depressed.
+
+ `int depress_priority'
+ The priority the thread was depressed from.
+
+ -- Data type: thread_sched_info_t
+ This is a pointer to a `struct thread_sched_info'.
+
+
+File: mach.info, Node: Thread Settings, Next: Thread Execution, Prev: Thread Information, Up: Thread Interface
+
+7.1.4 Thread Settings
+---------------------
+
+ -- Function: kern_return_t thread_wire (host_priv_t HOST_PRIV,
+ thread_t THREAD, boolean_t WIRED)
+ The function `thread_wire' controls the VM privilege level of the
+ thread THREAD. A VM-privileged thread never waits inside the
+ kernel for memory allocation from the kernel's free list of pages
+ or for allocation of a kernel stack.
+
+ Threads that are part of the default pageout path should be
+ VM-privileged, to prevent system deadlocks. Threads that are not
+ part of the default pageout path should not be VM-privileged, to
+ prevent the kernel's free list of pages from being exhausted.
+
+ The functions returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_ARGUMENT' if HOST_PRIV or THREAD was invalid.
+
+ The `thread_wire' call is actually an RPC to HOST_PRIV, normally a
+ send right for a privileged host port, but potentially any send
+ right. In addition to the normal diagnostic return codes from the
+ call's server (normally the kernel), the call may return `mach_msg'
+ return codes.
+
+
+File: mach.info, Node: Thread Execution, Next: Scheduling, Prev: Thread Settings, Up: Thread Interface
+
+7.1.5 Thread Execution
+----------------------
+
+ -- Function: kern_return_t thread_suspend (thread_t TARGET_THREAD)
+ Increments the thread's suspend count and prevents the thread from
+ executing any more user level instructions. In this context a user
+ level instruction is either a machine instruction executed in user
+ mode or a system trap instruction including page faults. Thus if
+ a thread is currently executing within a system trap the kernel
+ code may continue to execute until it reaches the system return
+ code or it may supend within the kernel code. In either case,
+ when the thread is resumed the system trap will return. This
+ could cause unpredictible results if the user did a suspend and
+ then altered the user state of the thread in order to change its
+ direction upon a resume. The call `thread_abort' is provided to
+ allow the user to abort any system call that is in progress in a
+ predictable way.
+
+ The suspend count may become greater than one with the effect that
+ it will take more than one resume call to restart the thread.
+
+ The function returns `KERN_SUCCESS' if the thread has been
+ suspended and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a
+ thread.
+
+ -- Function: kern_return_t thread_resume (thread_t TARGET_THREAD)
+ Decrements the threads's suspend count. If the count becomes zero
+ the thread is resumed. If it is still positive, the thread is left
+ suspended. The suspend count may not become negative.
+
+ The function returns `KERN_SUCCESS' if the thread has been resumed,
+ `KERN_FAILURE' if the suspend count is already zero and
+ `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread.
+
+ -- Function: kern_return_t thread_abort (thread_t TARGET_THREAD)
+ The function `thread_abort' aborts the kernel primitives:
+ `mach_msg', `msg_send', `msg_receive' and `msg_rpc' and
+ page-faults, making the call return a code indicating that it was
+ interrupted. The call is interrupted whether or not the thread
+ (or task containing it) is currently suspended. If it is
+ supsended, the thread receives the interupt when it is resumed.
+
+ A thread will retry an aborted page-fault if its state is not
+ modified before it is resumed. `msg_send' returns
+ `SEND_INTERRUPTED'; `msg_receive' returns `RCV_INTERRUPTED';
+ `msg_rpc' returns either `SEND_INTERRUPTED' or `RCV_INTERRUPTED',
+ depending on which half of the RPC was interrupted.
+
+ The main reason for this primitive is to allow one thread to
+ cleanly stop another thread in a manner that will allow the future
+ execution of the target thread to be controlled in a predictable
+ way. `thread_suspend' keeps the target thread from executing any
+ further instructions at the user level, including the return from
+ a system call. `thread_get_state'/`thread_set_state' allows the
+ examination or modification of the user state of a target thread.
+ However, if a suspended thread was executing within a system call,
+ it also has associated with it a kernel state. This kernel state
+ can not be modified by `thread_set_state' with the result that
+ when the thread is resumed the system call may return changing the
+ user state and possibly user memory. `thread_abort' aborts the
+ kernel call from the target thread's point of view by resetting
+ the kernel state so that the thread will resume execution at the
+ system call return with the return code value set to one of the
+ interrupted codes. The system call itself will either be entirely
+ completed or entirely aborted, depending on the precise moment at
+ which the abort was received. Thus if the thread's user state has
+ been changed by `thread_set_state', it will not be modified by any
+ unexpected system call side effects.
+
+ For example to simulate a Unix signal, the following sequence of
+ calls may be used:
+
+ 1. `thread_suspend': Stops the thread.
+
+ 2. `thread_abort': Interrupts any system call in progress,
+ setting the return value to `interrupted'. Since the thread
+ is stopped, it will not return to user code.
+
+ 3. `thread_set_state': Alters thread's state to simulate a
+ procedure call to the signal handler
+
+ 4. `thread_resume': Resumes execution at the signal handler. If
+ the thread's stack has been correctly set up, the thread may
+ return to the interrupted system call. (Of course, the code
+ to push an extra stack frame and change the registers is VERY
+ machine-dependent.)
+
+ Calling `thread_abort' on a non-suspended thread is pretty risky,
+ since it is very difficult to know exactly what system trap, if
+ any, the thread might be executing and whether an interrupt return
+ would cause the thread to do something useful.
+
+ The function returns `KERN_SUCCESS' if the thread received an
+ interrupt and `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a
+ thread.
+
+ -- Function: kern_return_t thread_get_state (thread_t TARGET_THREAD,
+ int FLAVOR, thread_state_t OLD_STATE,
+ mach_msg_type_number_t *OLD_STATECNT)
+ The function `thread_get_state' returns the execution state (e.g.
+ the machine registers) of TARGET_THREAD as specified by FLAVOR.
+ The OLD_STATE is an array of integers that is provided by the
+ caller and returned filled with the specified information.
+ OLD_STATECNT is input set to the maximum number of integers in
+ OLD_STATE and returned equal to the actual number of integers in
+ OLD_STATE.
+
+ TARGET_THREAD may not be `mach_thread_self()'.
+
+ The definition of the state structures can be found in
+ `machine/thread_status.h'.
+
+ The function returns `KERN_SUCCESS' if the state has been returned,
+ `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or is
+ `mach_thread_self' or FLAVOR is unrecogized for this machine. The
+ function returns `MIG_ARRAY_TOO_LARGE' if the returned state is
+ too large for OLD_STATE. In this case, OLD_STATE is filled as
+ much as possible and OLD_STATECNT is set to the number of elements
+ that would have been returned if there were enough room.
+
+ -- Function: kern_return_t thread_set_state (thread_t TARGET_THREAD,
+ int FLAVOR, thread_state_t NEW_STATE,
+ mach_msg_type_number_t NEW_STATE_COUNT)
+ The function `thread_set_state' sets the execution state (e.g. the
+ machine registers) of TARGET_THREAD as specified by FLAVOR. The
+ NEW_STATE is an array of integers. NEW_STATE_COUNT is the number
+ of elements in NEW_STATE. The entire set of registers is reset.
+ This will do unpredictable things if TARGET_THREAD is not
+ suspended.
+
+ TARGET_THREAD may not be `mach_thread_self'.
+
+ The definition of the state structures can be found in
+ `machine/thread_status.h'.
+
+ The function returns `KERN_SUCCESS' if the state has been set and
+ `KERN_INVALID_ARGUMENT' if TARGET_THREAD is not a thread or is
+ `mach_thread_self' or FLAVOR is unrecogized for this machine.
+
+
+File: mach.info, Node: Scheduling, Next: Thread Special Ports, Prev: Thread Execution, Up: Thread Interface
+
+7.1.6 Scheduling
+----------------
+
+* Menu:
+
+* Thread Priority:: Changing the priority of a thread.
+* Hand-Off Scheduling:: Switching to a new thread.
+* Scheduling Policy:: Setting the scheduling policy.
+
+
+File: mach.info, Node: Thread Priority, Next: Hand-Off Scheduling, Up: Scheduling
+
+7.1.6.1 Thread Priority
+.......................
+
+Threads have three priorities associated with them by the system, a
+priority, a maximum priority, and a scheduled priority. The scheduled
+priority is used to make scheduling decisions about the thread. It is
+determined from the priority by the policy (for timesharing, this means
+adding an increment derived from cpu usage). The priority can be set
+under user control, but may never exceed the maximum priority. Changing
+the maximum priority requires presentation of the control port for the
+thread's processor set; since the control port for the default processor
+set is privileged, users cannot raise their maximum priority to unfairly
+compete with other users on that set. Newly created threads obtain
+their priority from their task and their max priority from the thread.
+
+ -- Function: kern_return_t thread_priority (thread_t THREAD,
+ int PRORITY, boolean_t SET_MAX)
+ The function `thread_priority' changes the priority and optionally
+ the maximum priority of THREAD. Priorities range from 0 to 31,
+ where lower numbers denote higher priorities. If the new priority
+ is higher than the priority of the current thread, preemption may
+ occur as a result of this call. The maximum priority of the
+ thread is also set if SET_MAX is `TRUE'. This call will fail if
+ PRIORITY is greater than the current maximum priority of the
+ thread. As a result, this call can only lower the value of a
+ thread's maximum priority.
+
+ The functions returns `KERN_SUCCESS' if the operation completed
+ successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a thread or
+ PRIORITY is out of range (not in 0..31), and `KERN_FAILURE' if the
+ requested operation would violate the thread's maximum priority
+ (thread_priority).
+
+ -- Function: kern_return_t thread_max_priority (thread_t THREAD,
+ processor_set_t PROCESSOR_SET, int PRIORITY)
+ The function `thread_max_priority' changes the maximum priority of
+ the thread. Because it requires presentation of the corresponding
+ processor set port, this call can reset the maximum priority to any
+ legal value.
+
+ The functions returns `KERN_SUCCESS' if the operation completed
+ successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a thread or
+ PROCESSOR_SET is not a control port for a processor set or
+ PRIORITY is out of range (not in 0..31), and `KERN_FAILURE' if the
+ thread is not assigned to the processor set whose control port was
+ presented.
+
+
+File: mach.info, Node: Hand-Off Scheduling, Next: Scheduling Policy, Prev: Thread Priority, Up: Scheduling
+
+7.1.6.2 Hand-Off Scheduling
+...........................
+
+ -- Function: kern_return_t thread_switch (thread_t NEW_THREAD,
+ int OPTION, int TIME)
+ The function `thread_switch' provides low-level access to the
+ scheduler's context switching code. NEW_THREAD is a hint that
+ implements hand-off scheduling. The operating system will attempt
+ to switch directly to the new thread (by passing the normal logic
+ that selects the next thread to run) if possible. Since this is a
+ hint, it may be incorrect; it is ignored if it doesn't specify a
+ thread on the same host as the current thread or if that thread
+ can't be switched to (i.e., not runnable or already running on
+ another processor). In this case, the normal logic to select the
+ next thread to run is used; the current thread may continue
+ running if there is no other appropriate thread to run.
+
+ Options for OPTION are defined in `mach/thread_switch.h' and
+ specify the interpretation of TIME. The possible values for
+ OPTION are:
+
+ `SWITCH_OPTION_NONE'
+ No options, the time argument is ignored.
+
+ `SWITCH_OPTION_WAIT'
+ The thread is blocked for the specified time. This can be
+ aborted by `thread_abort'.
+
+ `SWITCH_OPTION_DEPRESS'
+ The thread's priority is depressed to the lowest possible
+ value for the specified time. This can be aborted by
+ `thread_depress_abort'. This depression is independent of
+ operations that change the thread's priority (e.g.
+ `thread_priority' will not abort the depression). The
+ minimum time and units of time can be obtained as the
+ `min_timeout' value from `host_info'. The depression is also
+ aborted when the current thread is next run (either via
+ hand­off scheduling or because the processor set has nothing
+ better to do).
+
+ `thread_switch' is often called when the current thread can proceed
+ no further for some reason; the various options and arguments allow
+ information about this reason to be transmitted to the kernel. The
+ NEW_THREAD argument (handoff scheduling) is useful when the
+ identity of the thread that must make progress before the current
+ thread runs again is known. The `WAIT' option is used when the
+ amount of time that the current thread must wait before it can do
+ anything useful can be estimated and is fairly long. The
+ `DEPRESS' option is used when the amount of time that must be
+ waited is fairly short, especially when the identity of the thread
+ that is being waited for is not known.
+
+ Users should beware of calling `thread_switch' with an invalid hint
+ (e.g. `MACH_PORT_NULL') and no option. Because the time-sharing
+ scheduler varies the priority of threads based on usage, this may
+ result in a waste of cpu time if the thread that must be run is of
+ lower priority. The use of the `DEPRESS' option in this situation
+ is highly recommended.
+
+ `thread_switch' ignores policies. Users relying on the preemption
+ semantics of a fixed time policy should be aware that
+ `thread_switch' ignores these semantics; it will run the specified
+ NEW_THREAD indepent of its priority and the priority of any other
+ threads that could be run instead.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_ARGUMENT' if THREAD is not a thread or OPTION is not
+ a recognized option, and `KERN_FAILURE' if `kern_depress_abort'
+ failed because the thread was not depressed.
+
+ -- Function: kern_return_t thread_depress_abort (thread_t THREAD)
+ The function `thread_depress_abort' cancels any priority depression
+ for THREAD caused by a `swtch_pri' or `thread_switch' call.
+
+ The function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if THREAD is not a valid thread.
+
+ -- Function: boolean_t swtch ()
+ The system trap `swtch' attempts to switch the current thread off
+ the processor. The return value indicates if more than the current
+ thread is running in the processor set. This is useful for lock
+ management routines.
+
+ The call returns `FALSE' if the thread is justified in becoming a
+ resource hog by continuing to spin because there's nothing else
+ useful that the processor could do. `TRUE' is returned if the
+ thread should make one more check on the lock and then be a good
+ citizen and really suspend.
+
+ -- Function: boolean_t swtch_pri (int PRIORITY)
+ The system trap `swtch_pri' attempts to switch the current thread
+ off the processor as `swtch' does, but depressing the priority of
+ the thread to the minimum possible value during the time.
+ PRIORITY is not used currently.
+
+ The return value is as for `swtch'.
+
+
+File: mach.info, Node: Scheduling Policy, Prev: Hand-Off Scheduling, Up: Scheduling
+
+7.1.6.3 Scheduling Policy
+.........................
+
+ -- Function: kern_return_t thread_policy (thread_t THREAD, int POLICY,
+ int DATA)
+ The function `thread_policy' changes the scheduling policy for
+ THREAD to POLICY.
+
+ DATA is policy-dependent scheduling information. There are
+ currently two supported policies: `POLICY_TIMESHARE' and
+ `POLICY_FIXEDPRI' defined in `mach/policy.h'; this file is
+ included by `mach.h'. DATA is meaningless for timesharing, but is
+ the quantum to be used (in milliseconds) for the fixed priority
+ policy. To be meaningful, this quantum must be a multiple of the
+ basic system quantum (min_quantum) which can be obtained from
+ `host_info'. The system will always round up to the next multiple
+ of the quantum.
+
+ Processor sets may restrict the allowed policies, so this call
+ will fail if the processor set to which THREAD is currently
+ assigned does not permit POLICY.
+
+ The function returns `KERN_SUCCESS' if the call succeeded.
+ `KERN_INVALID_ARGUMENT' if THREAD is not a thread or POLICY is not
+ a recognized policy, and `KERN_FAILURE' if the processor set to
+ which THREAD is currently assigned does not permit POLICY.
+
+
+File: mach.info, Node: Thread Special Ports, Next: Exceptions, Prev: Scheduling, Up: Thread Interface
+
+7.1.7 Thread Special Ports
+--------------------------
+
+ -- Function: kern_return_t thread_get_special_port (thread_t THREAD,
+ int WHICH_PORT, mach_port_t *SPECIAL_PORT)
+ The function `thread_get_special_port' returns send rights to one
+ of a set of special ports for the thread specified by THREAD.
+
+ The possible values for WHICH_PORT are `THREAD_KERNEL_PORT' and
+ `THREAD_EXCEPTION_PORT'. A thread also has access to its task's
+ special ports.
+
+ The function returns `KERN_SUCCESS' if the port was returned and
+ `KERN_INVALID_ARGUMENT' if THREAD is not a thread or WHICH_PORT is
+ an invalid port selector.
+
+ -- Function: kern_return_t thread_get_kernel_port (thread_t THREAD,
+ mach_port_t *KERNEL_PORT)
+ The function `thread_get_kernel_port' is equivalent to the function
+ `thread_get_special_port' with the WHICH_PORT argument set to
+ `THREAD_KERNEL_PORT'.
+
+ -- Function: kern_return_t thread_get_exception_port (thread_t THREAD,
+ mach_port_t *EXCEPTION_PORT)
+ The function `thread_get_exception_port' is equivalent to the
+ function `thread_get_special_port' with the WHICH_PORT argument
+ set to `THREAD_EXCEPTION_PORT'.
+
+ -- Function: kern_return_t thread_set_special_port (thread_t THREAD,
+ int WHICH_PORT, mach_port_t SPECIAL_PORT)
+ The function `thread_set_special_port' sets one of a set of special
+ ports for the thread specified by THREAD.
+
+ The possible values for WHICH_PORT are `THREAD_KERNEL_PORT' and
+ `THREAD_EXCEPTION_PORT'. A thread also has access to its task's
+ special ports.
+
+ The function returns `KERN_SUCCESS' if the port was set and
+ `KERN_INVALID_ARGUMENT' if THREAD is not a thread or WHICH_PORT is
+ an invalid port selector.
+
+ -- Function: kern_return_t thread_set_kernel_port (thread_t THREAD,
+ mach_port_t KERNEL_PORT)
+ The function `thread_set_kernel_port' is equivalent to the function
+ `thread_set_special_port' with the WHICH_PORT argument set to
+ `THREAD_KERNEL_PORT'.
+
+ -- Function: kern_return_t thread_set_exception_port (thread_t THREAD,
+ mach_port_t EXCEPTION_PORT)
+ The function `thread_set_exception_port' is equivalent to the
+ function `thread_set_special_port' with the WHICH_PORT argument
+ set to `THREAD_EXCEPTION_PORT'.
+
+
+File: mach.info, Node: Exceptions, Prev: Thread Special Ports, Up: Thread Interface
+
+7.1.8 Exceptions
+----------------
+
+ -- Function: kern_return_t catch_exception_raise
+ (mach_port_t EXCEPTION_PORT, thread_t THREAD, task_t TASK,
+ int EXCEPTION, int CODE, int SUBCODE)
+ XXX Fixme
+
+ -- Function: kern_return_t exception_raise
+ (mach_port_t EXCEPTION_PORT, mach_port_t THREAD,
+ mach_port_t TASK, integer_t EXCEPTION, integer_t CODE,
+ integer_t SUBCODE)
+ XXX Fixme
+
+ -- Function: kern_return_t evc_wait (unsigned int EVENT)
+ The system trap `evc_wait' makes the calling thread wait for the
+ event specified by EVENT.
+
+ The call returns `KERN_SUCCESS' if the event has occured,
+ `KERN_NO_SPACE' if another thread is waiting for the same event and
+ `KERN_INVALID_ARGUMENT' if the event object is invalid.
+
+
+File: mach.info, Node: Task Interface, Next: Profiling, Prev: Thread Interface, Up: Threads and Tasks
+
+7.2 Task Interface
+==================
+
+ -- Data type: task_t
+ This is a `mach_port_t' and used to hold the port name of a task
+ port that represents the thread. Manipulations of the task are
+ implemented as remote procedure calls to the task port. A task
+ can get a port to itself with the `mach_task_self' system call.
+
+ The task port name is also used to identify the task's IPC space
+ (*note Port Manipulation Interface::) and the task's virtual
+ memory map (*note Virtual Memory Interface::).
+
+* Menu:
+
+* Task Creation:: Creating tasks.
+* Task Termination:: Terminating tasks.
+* Task Information:: Informations on tasks.
+* Task Execution:: Thread scheduling in a task.
+* Task Special Ports:: How to get and set the task's special ports.
+* Syscall Emulation:: How to emulate system calls.
+
+
+File: mach.info, Node: Task Creation, Next: Task Termination, Up: Task Interface
+
+7.2.1 Task Creation
+-------------------
+
+ -- Function: kern_return_t task_create (task_t PARENT_TASK,
+ boolean_t INHERIT_MEMORY, task_t *CHILD_TASK)
+ The function `task_create' creates a new task from PARENT_TASK;
+ the resulting task (CHILD_TASK) acquires shared or copied parts of
+ the parent's address space (see `vm_inherit'). The child task
+ initially contains no threads.
+
+ If INHERIT_MEMORY is set, the child task's address space is built
+ from the parent task according to its memory inheritance values;
+ otherwise, the child task is given an empty address space.
+
+ The child task gets the three special ports created or copied for
+ it at task creation. The `TASK_KERNEL_PORT' is created and send
+ rights for it are given to the child and returned to the caller.
+ The `TASK_BOOTSTRAP_PORT' and the `TASK_EXCEPTION_PORT' are
+ inherited from the parent task. The new task can get send rights
+ to these ports with the call `task_get_special_port'.
+
+ The function returns `KERN_SUCCESS' if a new task has been created,
+ `KERN_INVALID_ARGUMENT' if PARENT_TASK is not a valid task port
+ and `KERN_RESOURCE_SHORTAGE' if some critical kernel resource is
+ unavailable.
+
+
+File: mach.info, Node: Task Termination, Next: Task Information, Prev: Task Creation, Up: Task Interface
+
+7.2.2 Task Termination
+----------------------
+
+ -- Function: kern_return_t task_terminate (task_t TARGET_TASK)
+ The function `task_terminate' destroys the task specified by
+ TARGET_TASK and all its threads. All resources that are used only
+ by this task are freed. Any port to which this task has receive
+ and ownership rights is destroyed.
+
+ The function returns `KERN_SUCCESS' if the task has been killed,
+ `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task.
+
+
+File: mach.info, Node: Task Information, Next: Task Execution, Prev: Task Termination, Up: Task Interface
+
+7.2.3 Task Information
+----------------------
+
+ -- Function: task_t mach_task_self ()
+ The `mach_task_self' system call returns the calling thread's task
+ port.
+
+ `mach_task_self' has an effect equivalent to receiving a send right
+ for the task port. `mach_task_self' returns the name of the send
+ right. In particular, successive calls will increase the calling
+ task's user-reference count for the send right.
+
+ As a special exception, the kernel will overrun the user reference
+ count of the task name port, so that this function can not fail
+ for that reason. Because of this, the user should not deallocate
+ the port right if an overrun might have happened. Otherwise the
+ reference count could drop to zero and the send right be destroyed
+ while the user still expects to be able to use it. As the kernel
+ does not make use of the number of extant send rights anyway, this
+ is safe to do (the task port itself is not destroyed, even when
+ there are no send rights anymore).
+
+ The funcion returns `MACH_PORT_NULL' if a resource shortage
+ prevented the reception of the send right, `MACH_PORT_NULL' if the
+ task port is currently null, `MACH_PORT_DEAD' if the task port is
+ currently dead.
+
+ -- Function: kern_return_t task_threads (task_t TARGET_TASK,
+ thread_array_t *THREAD_LIST,
+ mach_msg_type_number_t *THREAD_COUNT)
+ The function `task_threads' gets send rights to the kernel port for
+ each thread contained in TARGET_TASK. THREAD_LIST is an array
+ that is created as a result of this call. The caller may wish to
+ `vm_deallocate' this array when the data is no longer needed.
+
+ The function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task.
+
+ -- Function: kern_return_t task_info (task_t TARGET_TASK, int FLAVOR,
+ task_info_t TASK_INFO,
+ mach_msg_type_number_t *TASK_INFO_COUNT)
+ The function `task_info' returns the selected information array for
+ a task, as specified by FLAVOR. TASK_INFO is an array of integers
+ that is supplied by the caller, and filled with specified
+ information. TASK_INFO_COUNT is supplied as the maximum number of
+ integers in TASK_INFO. On return, it contains the actual number
+ of integers in TASK_INFO. The maximum number of integers returned
+ by any flavor is `TASK_INFO_MAX'.
+
+ The type of information returned is defined by FLAVOR, which can
+ be one of the following:
+
+ `TASK_BASIC_INFO'
+ The function returns basic information about the task, as
+ defined by `task_basic_info_t'. This includes the user and
+ system time and memory consumption. The number of integers
+ returned is `TASK_BASIC_INFO_COUNT'.
+
+ `TASK_EVENTS_INFO'
+ The function returns information about events for the task as
+ defined by `thread_sched_info_t'. This includes statistics
+ about virtual memory and IPC events like pageouts, pageins
+ and messages sent and received. The number of integers
+ returned is `TASK_EVENTS_INFO_COUNT'.
+
+ `TASK_THREAD_TIMES_INFO'
+ The function returns information about the total time for
+ live threads as defined by `task_thread_times_info_t'. The
+ number of integers returned is `TASK_THREAD_TIMES_INFO_COUNT'.
+
+ The function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a thread or FLAVOR
+ is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if
+ the returned info array is too large for TASK_INFO. In this case,
+ TASK_INFO is filled as much as possible and TASK_INFOCNT is set to
+ the number of elements that would have been returned if there were
+ enough room.
+
+ -- Data type: struct task_basic_info
+ This structure is returned in TASK_INFO by the `task_info'
+ function and provides basic information about the task. You can
+ cast a variable of type `task_info_t' to a pointer of this type if
+ you provided it as the TASK_INFO parameter for the
+ `TASK_BASIC_INFO' flavor of `task_info'. It has the following
+ members:
+
+ `integer_t suspend_count'
+ suspend count for task
+
+ `integer_t base_priority'
+ base scheduling priority
+
+ `vm_size_t virtual_size'
+ number of virtual pages
+
+ `vm_size_t resident_size'
+ number of resident pages
+
+ `time_value_t user_time'
+ total user run time for terminated threads
+
+ `time_value_t system_time'
+ total system run time for terminated threads
+
+ `time_value_t creation_time'
+ creation time stamp
+
+ -- Data type: task_basic_info_t
+ This is a pointer to a `struct task_basic_info'.
+
+ -- Data type: struct task_events_info
+ This structure is returned in TASK_INFO by the `task_info'
+ function and provides event statistics for the task. You can cast
+ a variable of type `task_info_t' to a pointer of this type if you
+ provided it as the TASK_INFO parameter for the `TASK_EVENTS_INFO'
+ flavor of `task_info'. It has the following members:
+
+ `natural_t faults'
+ number of page faults
+
+ `natural_t zero_fills'
+ number of zero fill pages
+
+ `natural_t reactivations'
+ number of reactivated pages
+
+ `natural_t pageins'
+ number of actual pageins
+
+ `natural_t cow_faults'
+ number of copy-on-write faults
+
+ `natural_t messages_sent'
+ number of messages sent
+
+ `natural_t messages_received'
+ number of messages received
+
+ -- Data type: task_events_info_t
+ This is a pointer to a `struct task_events_info'.
+
+ -- Data type: struct task_thread_times_info
+ This structure is returned in TASK_INFO by the `task_info'
+ function and provides event statistics for the task. You can cast
+ a variable of type `task_info_t' to a pointer of this type if you
+ provided it as the TASK_INFO parameter for the
+ `TASK_THREAD_TIMES_INFO' flavor of `task_info'. It has the
+ following members:
+
+ `time_value_t user_time'
+ total user run time for live threads
+
+ `time_value_t system_time'
+ total system run time for live threads
+
+ -- Data type: task_thread_times_info_t
+ This is a pointer to a `struct task_thread_times_info'.
+
+
+File: mach.info, Node: Task Execution, Next: Task Special Ports, Prev: Task Information, Up: Task Interface
+
+7.2.4 Task Execution
+--------------------
+
+ -- Function: kern_return_t task_suspend (task_t TARGET_TASK)
+ The function `task_suspend' increments the task's suspend count and
+ stops all threads in the task. As long as the suspend count is
+ positive newly created threads will not run. This call does not
+ return until all threads are suspended.
+
+ The count may become greater than one, with the effect that it
+ will take more than one resume call to restart the task.
+
+ The function returns `KERN_SUCCESS' if the task has been suspended
+ and `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task.
+
+ -- Function: kern_return_t task_resume (task_t TARGET_TASK)
+ The function `task_resume' decrements the task's suspend count. If
+ it becomes zero, all threads with zero suspend counts in the task
+ are resumed. The count may not become negative.
+
+ The function returns `KERN_SUCCESS' if the task has been resumed,
+ `KERN_FAILURE' if the suspend count is already at zero and
+ `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task.
+
+ -- Function: kern_return_t task_priority (task_t TASK, int PRIORITY,
+ boolean_t CHANGE_THREADS)
+ The priority of a task is used only for creation of new threads; a
+ new thread's priority is set to the enclosing task's priority.
+ `task_priority' changes this task priority. It also sets the
+ priorities of all threads in the task to this new priority if
+ CHANGE_THREADS is `TRUE'. Existing threads are not affected
+ otherwise. If this priority change violates the maximum priority
+ of some threads, as many threads as possible will be changed and
+ an error code will be returned.
+
+ The function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_ARGUMENT' if TASK is not a task, or PRIORITY is not
+ a valid priority and `KERN_FAILURE' if CHANGE_THREADS was `TRUE'
+ and the attempt to change the priority of at least one existing
+ thread failed because the new priority would have exceeded that
+ thread's maximum priority.
+
+ -- Function: kern_return_t task_ras_control (task_t TARGET_TASK,
+ vm_address_t START_PC, vm_address_t END_PC, int FLAVOR)
+ The function `task_ras_control' manipulates a task's set of
+ restartable atomic sequences. If a sequence is installed, and any
+ thread in the task is preempted within the range
+ [START_PC,END_PC], then the thread is resumed at START_PC. This
+ enables applications to build atomic sequences which, when
+ executed to completion, will have executed atomically.
+ Restartable atomic sequences are intended to be used on systems
+ that do not have hardware support for low-overhead atomic
+ primitives.
+
+ As a thread can be rolled-back, the code in the sequence should
+ have no side effects other than a final store at END_PC. The
+ kernel does not guarantee that the sequence is restartable. It
+ assumes the application knows what it's doing.
+
+ A task may have a finite number of atomic sequences that is
+ defined at compile time.
+
+ The flavor specifices the particular operation that should be
+ applied to this restartable atomic sequence. Possible values for
+ flavor can be:
+
+ `TASK_RAS_CONTROL_PURGE_ALL'
+ Remove all registered sequences for this task.
+
+ `TASK_RAS_CONTROL_PURGE_ONE'
+ Remove the named registered sequence for this task.
+
+ `TASK_RAS_CONTROL_PURGE_ALL_AND_INSTALL_ONE'
+ Atomically remove all registered sequences and install the
+ named sequence.
+
+ `TASK_RAS_CONTROL_INSTALL_ONE'
+ Install this sequence.
+
+ The function returns `KERN_SUCCESS' if the operation has been
+ performed, `KERN_INVALID_ADDRESS' if the START_PC or END_PC values
+ are not a valid address for the requested operation (for example,
+ it is invalid to purge a sequence that has not been registered),
+ `KERN_RESOURCE_SHORTAGE' if an attempt was made to install more
+ restartable atomic sequences for a task than can be supported by
+ the kernel, `KERN_INVALID_VALUE' if a bad flavor was specified,
+ `KERN_INVALID_ARGUMENT' if TARGET_TASK is not a task and
+ `KERN_FAILURE' if the call is not not supported on this
+ configuration.
+
+
+File: mach.info, Node: Task Special Ports, Next: Syscall Emulation, Prev: Task Execution, Up: Task Interface
+
+7.2.5 Task Special Ports
+------------------------
+
+ -- Function: kern_return_t task_get_special_port (task_t TASK,
+ int WHICH_PORT, mach_port_t *SPECIAL_PORT)
+ The function `task_get_special_port' returns send rights to one of
+ a set of special ports for the task specified by TASK.
+
+ The special ports associated with a task are the kernel port
+ (`TASK_KERNEL_PORT'), the bootstrap port (`TASK_BOOTSTRAP_PORT')
+ and the exception port (`TASK_EXCEPTION_PORT'). The bootstrap
+ port is a port to which a task may send a message requesting other
+ system service ports. This port is not used by the kernel. The
+ task's exception port is the port to which messages are sent by
+ the kernel when an exception occurs and the thread causing the
+ exception has no exception port of its own.
+
+ The following macros to call `task_get_special_port' for a specific
+ port are defined in `mach/task_special_ports.h':
+ `task_get_exception_port' and `task_get_bootstrap_port'.
+
+ The function returns `KERN_SUCCESS' if the port was returned and
+ `KERN_INVALID_ARGUMENT' if TASK is not a task or WHICH_PORT is an
+ invalid port selector.
+
+ -- Function: kern_return_t task_get_kernel_port (task_t TASK,
+ mach_port_t *KERNEL_PORT)
+ The function `task_get_kernel_port' is equivalent to the function
+ `task_get_special_port' with the WHICH_PORT argument set to
+ `TASK_KERNEL_PORT'.
+
+ -- Function: kern_return_t task_get_exception_port (task_t TASK,
+ mach_port_t *EXCEPTION_PORT)
+ The function `task_get_exception_port' is equivalent to the
+ function `task_get_special_port' with the WHICH_PORT argument set
+ to `TASK_EXCEPTION_PORT'.
+
+ -- Function: kern_return_t task_get_bootstrap_port (task_t TASK,
+ mach_port_t *BOOTSTRAP_PORT)
+ The function `task_get_bootstrap_port' is equivalent to the
+ function `task_get_special_port' with the WHICH_PORT argument set
+ to `TASK_BOOTSTRAP_PORT'.
+
+ -- Function: kern_return_t task_set_special_port (task_t TASK,
+ int WHICH_PORT, mach_port_t SPECIAL_PORT)
+ The function `thread_set_special_port' sets one of a set of special
+ ports for the task specified by TASK.
+
+ The special ports associated with a task are the kernel port
+ (`TASK_KERNEL_PORT'), the bootstrap port (`TASK_BOOTSTRAP_PORT')
+ and the exception port (`TASK_EXCEPTION_PORT'). The bootstrap
+ port is a port to which a thread may send a message requesting
+ other system service ports. This port is not used by the kernel.
+ The task's exception port is the port to which messages are sent
+ by the kernel when an exception occurs and the thread causing the
+ exception has no exception port of its own.
+
+ The function returns `KERN_SUCCESS' if the port was set and
+ `KERN_INVALID_ARGUMENT' if TASK is not a task or WHICH_PORT is an
+ invalid port selector.
+
+ -- Function: kern_return_t task_set_kernel_port (task_t TASK,
+ mach_port_t KERNEL_PORT)
+ The function `task_set_kernel_port' is equivalent to the function
+ `task_set_special_port' with the WHICH_PORT argument set to
+ `TASK_KERNEL_PORT'.
+
+ -- Function: kern_return_t task_set_exception_port (task_t TASK,
+ mach_port_t EXCEPTION_PORT)
+ The function `task_set_exception_port' is equivalent to the
+ function `task_set_special_port' with the WHICH_PORT argument set
+ to `TASK_EXCEPTION_PORT'.
+
+ -- Function: kern_return_t task_set_bootstrap_port (task_t TASK,
+ mach_port_t BOOTSTRAP_PORT)
+ The function `task_set_bootstrap_port' is equivalent to the
+ function `task_set_special_port' with the WHICH_PORT argument set
+ to `TASK_BOOTSTRAP_PORT'.
+
+
+File: mach.info, Node: Syscall Emulation, Prev: Task Special Ports, Up: Task Interface
+
+7.2.6 Syscall Emulation
+-----------------------
+
+ -- Function: kern_return_t task_get_emulation_vector (task_t TASK,
+ int *VECTOR_START, emulation_vector_t *EMULATION_VECTOR,
+ mach_msg_type_number_t *EMULATION_VECTOR_COUNT)
+ The function `task_get_emulation_vector' gets the user-level
+ handler entry points for all emulated system calls.
+
+ -- Function: kern_return_t task_set_emulation_vector (task_t TASK,
+ int VECTOR_START, emulation_vector_t EMULATION_VECTOR,
+ mach_msg_type_number_t EMULATION_VECTOR_COUNT)
+ The function `task_set_emulation_vector' establishes user-level
+ handlers for the specified system calls. Non-emulated system
+ calls are specified with an entry of `EML_ROUTINE_NULL'. System
+ call emulation handlers are inherited by the childs of TASK.
+
+ -- Function: kern_return_t task_set_emulation (task_t TASK,
+ vm_address_t ROUTINE_ENTRY_PT, int ROUTINE_NUMBER)
+ The function `task_set_emulation' establishes a user-level handler
+ for the specified system call. System call emulation handlers are
+ inherited by the childs of TASK.
+
+
+File: mach.info, Node: Profiling, Prev: Task Interface, Up: Threads and Tasks
+
+7.3 Profiling
+=============
+
+ -- Function: kern_return_t task_enable_pc_sampling (task_t TASK,
+ int *TICKS, sampled_pc_flavor_t FLAVOR)
+ -- Function: kern_return_t thread_enable_pc_sampling (thread_t THREAD,
+ int *TICKS, sampled_pc_flavor_t FLAVOR)
+ The function `task_enable_pc_sampling' enables PC sampling for
+ TASK, the function `thread_enable_pc_sampling' enables PC sampling
+ for THREAD. The kernel's idea of clock granularity is returned in
+ TICKS in usecs. (this value should not be trusted). The sampling
+ flavor is specified by FLAVOR.
+
+ The function returns `KERN_SUCCESS' if the operation is completed
+ successfully and `KERN_INVALID_ARGUMENT' if THREAD is not a valid
+ thread.
+
+ -- Function: kern_return_t task_disable_pc_sampling (task_t TASK,
+ int *SAMPLE_COUNT)
+ -- Function: kern_return_t thread_disable_pc_sampling
+ (thread_t THREAD, int *SAMPLE_COUNT)
+ The function `task_disable_pc_sampling' disables PC sampling for
+ TASK, the function `thread_disable_pc_sampling' disables PC
+ sampling for THREAD. The number of sample elements in the kernel
+ for the thread is returned in SAMPLE_COUNT.
+
+ The function returns `KERN_SUCCESS' if the operation is completed
+ successfully and `KERN_INVALID_ARGUMENT' if THREAD is not a valid
+ thread.
+
+ -- Function: kern_return_t task_get_sampled_pcs (task_t TASK,
+ sampled_pc_seqno_t *SEQNO, sampled_pc_array_t SAMPLED_PCS,
+ mach_msg_type_number_t *SAMPLE_COUNT)
+ -- Function: kern_return_t thread_get_sampled_pcs (thread_t THREAD,
+ sampled_pc_seqno_t *SEQNO, sampled_pc_array_t SAMPLED_PCS,
+ int *SAMPLE_COUNT)
+ The function `task_get_sampled_pcs' extracts the PC samples for
+ TASK, the function `thread_get_sampled_pcs' extracts the PC
+ samples for THREAD. SEQNO is the sequence number of the sampled
+ PCs. This is useful for determining when a collector thread has
+ missed a sample. The sampled PCs for the thread are returned in
+ SAMPLED_PCS. SAMPLE_COUNT contains the number of sample elements
+ returned.
+
+ The function returns `KERN_SUCCESS' if the operation is completed
+ successfully, `KERN_INVALID_ARGUMENT' if THREAD is not a valid
+ thread and `KERN_FAILURE' if THREAD is not sampled.
+
+ -- Data type: sampled_pc_t
+ This structure is returned in SAMPLED_PCS by the
+ `thread_get_sampled_pcs' and `task_get_sampled_pcs' functions and
+ provides pc samples for threads or tasks. It has the following
+ members:
+
+ `natural_t id'
+ A thread-specific unique identifier.
+
+ `vm_offset_t pc'
+ A pc value.
+
+ `sampled_pc_flavor_t sampletype'
+ The type of the sample as per flavor.
+
+ -- Data type: sampled_pc_flavor_t
+ This data type specifies a pc sample flavor, either as argument
+ passed in FLAVOR to the `thread_enable_pc_sample' and
+ `thread_disable_pc_sample' functions, or as member `sampletype' in
+ the `sample_pc_t' data type. The flavor is a bitwise-or of the
+ possible flavors defined in `mach/pc_sample.h':
+
+ `SAMPLED_PC_PERIODIC'
+ default
+
+ `SAMPLED_PC_VM_ZFILL_FAULTS'
+ zero filled fault
+
+ `SAMPLED_PC_VM_REACTIVATION_FAULTS'
+ reactivation fault
+
+ `SAMPLED_PC_VM_PAGEIN_FAULTS'
+ pagein fault
+
+ `SAMPLED_PC_VM_COW_FAULTS'
+ copy-on-write fault
+
+ `SAMPLED_PC_VM_FAULTS_ANY'
+ any fault
+
+ `SAMPLED_PC_VM_FAULTS'
+ the bitwise-or of `SAMPLED_PC_VM_ZFILL_FAULTS',
+ `SAMPLED_PC_VM_REACTIVATION_FAULTS',
+ `SAMPLED_PC_VM_PAGEIN_FAULTS' and `SAMPLED_PC_VM_COW_FAULTS'.
+
+
+File: mach.info, Node: Host Interface, Next: Processors and Processor Sets, Prev: Threads and Tasks, Up: Top
+
+8 Host Interface
+****************
+
+This section describes the Mach interface to a host executing a Mach
+kernel. The interface allows to query statistics about a host and
+control its behaviour.
+
+ A host is represented by two ports, a name port HOST used to query
+information about the host accessible to everyone, and a control port
+HOST_PRIV used to manipulate it. For example, you can query the
+current time using the name port, but to change the time you need to
+send a message to the host control port.
+
+ Everything described in this section is declared in the header file
+`mach.h'.
+
+* Menu:
+
+* Host Ports:: Ports representing a host.
+* Host Information:: Retrieval of information about a host.
+* Host Time:: Operations on the time as seen by a host.
+* Host Reboot:: Rebooting the system.
+
+
+File: mach.info, Node: Host Ports, Next: Host Information, Up: Host Interface
+
+8.1 Host Ports
+==============
+
+ -- Data type: host_t
+ This is a `mach_port_t' and used to hold the port name of a host
+ name port (or short: host port). Any task can get a send right to
+ the name port of the host running the task using the
+ `mach_host_self' system call. The name port can be used query
+ information about the host, for example the current time.
+
+ -- Function: host_t mach_host_self ()
+ The `mach_host_self' system call returns the calling thread's host
+ name port. It has an effect equivalent to receiving a send right
+ for the host port. `mach_host_self' returns the name of the send
+ right. In particular, successive calls will increase the calling
+ task's user-reference count for the send right.
+
+ As a special exception, the kernel will overrun the user reference
+ count of the host name port, so that this function can not fail
+ for that reason. Because of this, the user should not deallocate
+ the port right if an overrun might have happened. Otherwise the
+ reference count could drop to zero and the send right be destroyed
+ while the user still expects to be able to use it. As the kernel
+ does not make use of the number of extant send rights anyway, this
+ is safe to do (the host port itself is never destroyed).
+
+ The function returns `MACH_PORT_NULL' if a resource shortage
+ prevented the reception of the send right.
+
+ This function is also available in `mach/mach_traps.h'.
+
+ -- Data type: host_priv_t
+ This is a `mach_port_t' and used to hold the port name of a
+ privileged host control port. A send right to the host control
+ port is inserted into the first task at bootstrap (*note
+ Modules::). This is the only way to get access to the host
+ control port in Mach, so the initial task has to preserve the send
+ right carefully, moving a copy of it to other privileged tasks if
+ necessary and denying access to unprivileged tasks.
+
+
+File: mach.info, Node: Host Information, Next: Host Time, Prev: Host Ports, Up: Host Interface
+
+8.2 Host Information
+====================
+
+ -- Function: kern_return_t host_info (host_t HOST, int FLAVOR,
+ host_info_t HOST_INFO,
+ mach_msg_type_number_t *HOST_INFO_COUNT)
+ The `host_info' function returns various information about HOST.
+ HOST_INFO is an array of integers that is supplied by the caller.
+ It will be filled with the requested information. HOST_INFO_COUNT
+ is supplied as the maximum number of integers in HOST_INFO. On
+ return, it contains the actual number of integers in HOST_INFO.
+ The maximum number of integers returned by any flavor is
+ `HOST_INFO_MAX'.
+
+ The type of information returned is defined by FLAVOR, which can
+ be one of the following:
+
+ `HOST_BASIC_INFO'
+ The function returns basic information about the host, as
+ defined by `host_basic_info_t'. This includes the number of
+ processors, their type, and the amount of memory installed in
+ the system. The number of integers returned is
+ `HOST_BASIC_INFO_COUNT'. For how to get more information
+ about the processor, see *Note Processor Interface::.
+
+ `HOST_PROCESSOR_SLOTS'
+ The function returns the numbers of the slots with active
+ processors in them. The number of integers returned can be
+ up to `max_cpus', as returned by the `HOST_BASIC_INFO' flavor
+ of `host_info'.
+
+ `HOST_SCHED_INFO'
+ The function returns information of interest to schedulers as
+ defined by `host_sched_info_t'. The number of integers
+ returned is `HOST_SCHED_INFO_COUNT'.
+
+ The function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if HOST is not a host or FLAVOR is not
+ recognized. The function returns `MIG_ARRAY_TOO_LARGE' if the
+ returned info array is too large for HOST_INFO. In this case,
+ HOST_INFO is filled as much as possible and HOST_INFO_COUNT is set
+ to the number of elements that would be returned if there were
+ enough room.
+
+ -- Data type: struct host_basic_info
+ A pointer to this structure is returned in HOST_INFO by the
+ `host_info' function and provides basic information about the host.
+ You can cast a variable of type `host_info_t' to a pointer of this
+ type if you provided it as the HOST_INFO parameter for the
+ `HOST_BASIC_INFO' flavor of `host_info'. It has the following
+ members:
+
+ `int max_cpus'
+ The maximum number of possible processors for which the
+ kernel is configured.
+
+ `int avail_cpus'
+ The number of cpus currently available.
+
+ `vm_size_t memory_size'
+ The size of physical memory in bytes.
+
+ `cpu_type_t cpu_type'
+ The type of the master processor.
+
+ `cpu_subtype_t cpu_subtype'
+ The subtype of the master processor.
+
+ The type and subtype of the individual processors are also
+ available by `processor_info', see *Note Processor Interface::.
+
+ -- Data type: host_basic_info_t
+ This is a pointer to a `struct host_basic_info'.
+
+ -- Data type: struct host_sched_info
+ A pointer to this structure is returned in HOST_INFO by the
+ `host_info' function and provides information of interest to
+ schedulers. You can cast a variable of type `host_info_t' to a
+ pointer of this type if you provided it as the HOST_INFO parameter
+ for the `HOST_SCHED_INFO' flavor of `host_info'. It has the
+ following members:
+
+ `int min_timeout'
+ The minimum timeout and unit of time in milliseconds.
+
+ `int min_quantum'
+ The minimum quantum and unit of quantum in milliseconds.
+
+ -- Data type: host_sched_info_t
+ This is a pointer to a `struct host_sched_info'.
+
+ -- Function: kern_return_t host_kernel_version (host_t HOST,
+ kernel_version_t *VERSION)
+ The `host_kernel_version' function returns the version string
+ compiled into the kernel executing on HOST at the time it was
+ built in the character string VERSION. This string describes the
+ version of the kernel. The constant `KERNEL_VERSION_MAX' should be
+ used to dimension storage for the returned string if the
+ `kernel_version_t' declaration is not used.
+
+ If the version string compiled into the kernel is longer than
+ `KERNEL_VERSION_MAX', the result is truncated and not necessarily
+ null-terminated.
+
+ If HOST is not a valid send right to a host port, the function
+ returns `KERN_INVALID_ARGUMENT'. If VERSION points to
+ inaccessible memory, it returns `KERN_INVALID_ADDRESS', and
+ `KERN_SUCCESS' otherwise.
+
+ -- Function: kern_return_t host_get_boot_info (host_priv_t HOST_PRIV,
+ kernel_boot_info_t BOOT_INFO)
+ The `host_get_boot_info' function returns the boot-time information
+ string supplied by the operator to the kernel executing on
+ HOST_PRIV in the character string BOOT_INFO. The constant
+ `KERNEL_BOOT_INFO_MAX' should be used to dimension storage for the
+ returned string if the `kernel_boot_info_t' declaration is not
+ used.
+
+ If the boot-time information string supplied by the operator is
+ longer than `KERNEL_BOOT_INFO_MAX', the result is truncated and not
+ necessarily null-terminated.
+
+
+File: mach.info, Node: Host Time, Next: Host Reboot, Prev: Host Information, Up: Host Interface
+
+8.3 Host Time
+=============
+
+ -- Data type: time_value_t
+ This is the representation of a time in Mach. It is a `struct
+ time_value' and consists of the following members:
+
+ `integer_t seconds'
+ The number of seconds.
+
+ `integer_t microseconds'
+ The number of microseconds.
+
+The number of microseconds should always be smaller than
+`TIME_MICROS_MAX' (100000). A time with this property is "normalized".
+Normalized time values can be manipulated with the following macros:
+
+ -- Macro: time_value_add_usec (time_value_t *VAL, integer_t *MICROS)
+ Add MICROS microseconds to VAL. If VAL is normalized and MICROS
+ smaller than `TIME_MICROS_MAX', VAL will be normalized afterwards.
+
+ -- Macro: time_value_add (time_value_t *RESULT, time_value_t *ADDEND)
+ Add the values in ADDEND to RESULT. If both are normalized,
+ RESULT will be normalized afterwards.
+
+ A variable of type `time_value_t' can either represent a duration or
+a fixed point in time. In the latter case, it shall be interpreted as
+the number of seconds and microseconds after the epoch 1. Jan 1970.
+
+ -- Function: kern_return_t host_get_time (host_t HOST,
+ time_value_t *CURRENT_TIME)
+ Get the current time as seen by HOST. On success, the time passed
+ since the epoch is returned in CURRENT_TIME.
+
+ -- Function: kern_return_t host_set_time (host_priv_t HOST_PRIV,
+ time_value_t NEW_TIME)
+ Set the time of HOST_PRIV to NEW_TIME.
+
+ -- Function: kern_return_t host_adjust_time (host_priv_t HOST_PRIV,
+ time_value_t NEW_ADJUSTMENT, time_value_t *OLD_ADJUSTMENT)
+ Arrange for the current time as seen by HOST_PRIV to be gradually
+ changed by the adjustment value NEW_ADJUSTMENT, and return the old
+ adjustment value in OLD_ADJUSTMENT.
+
+ For efficiency, the current time is available through a mapped-time
+interface.
+
+ -- Data type: mapped_time_value_t
+ This structure defines the mapped-time interface. It has the
+ following members:
+
+ `integer_t seconds'
+ The number of seconds.
+
+ `integer_t microseconds'
+ The number of microseconds.
+
+ `integer_t check_seconds'
+ This is a copy of the seconds value, which must be checked to
+ protect against a race condition when reading out the two
+ time values.
+
+ Here is an example how to read out the current time using the
+mapped-time interface:
+
+ do
+ {
+ secs = mtime->seconds;
+ usecs = mtime->microseconds;
+ }
+ while (secs != mtime->check_seconds);
+
+
+File: mach.info, Node: Host Reboot, Prev: Host Time, Up: Host Interface
+
+8.4 Host Reboot
+===============
+
+ -- Function: kern_return_t host_reboot (host_priv_t HOST_PRIV,
+ int OPTIONS)
+ Reboot the host specified by HOST_PRIV. The argument OPTIONS
+ specifies the flags. The available flags are defined in
+ `sys/reboot.h':
+
+ `RB_HALT'
+ Do not reboot, but halt the machine.
+
+ `RB_DEBUGGER'
+ Do not reboot, but enter kernel debugger from user space.
+
+ If successful, the function might not return.
+
+
+File: mach.info, Node: Processors and Processor Sets, Next: Device Interface, Prev: Host Interface, Up: Top
+
+9 Processors and Processor Sets
+*******************************
+
+This section describes the Mach interface to processor sets and
+individual processors. The interface allows to group processors into
+sets and control the processors and processor sets.
+
+ A processor is not a central part of the interface. It is mostly of
+relevance as a part of a processor set. Threads are always assigned to
+processor sets, and all processors in a set are equally involved in
+executing all threads assigned to that set.
+
+ The processor set is represented by two ports, a name port
+PROCESSOR_SET_NAME used to query information about the host accessible
+to everyone, and a control port PROCESSOR_SET used to manipulate it.
+
+* Menu:
+
+* Processor Set Interface:: How to work with processor sets.
+* Processor Interface:: How to work with individual processors.
+
+
+File: mach.info, Node: Processor Set Interface, Next: Processor Interface, Up: Processors and Processor Sets
+
+9.1 Processor Set Interface
+===========================
+
+* Menu:
+
+* Processor Set Ports:: Ports representing a processor set.
+* Processor Set Access:: How the processor sets are accessed.
+* Processor Set Creation:: How new processor sets are created.
+* Processor Set Destruction:: How processor sets are destroyed.
+* Tasks and Threads on Sets:: Assigning tasks, threads to processor sets.
+* Processor Set Priority:: Specifying the priority of a processor set.
+* Processor Set Policy:: Changing the processor set policies.
+* Processor Set Info:: Obtaining information about a processor set.
+
+
+File: mach.info, Node: Processor Set Ports, Next: Processor Set Access, Up: Processor Set Interface
+
+9.1.1 Processor Set Ports
+-------------------------
+
+ -- Data type: processor_set_name_t
+ This is a `mach_port_t' and used to hold the port name of a
+ processor set name port that names the processor set. Any task
+ can get a send right to name port of a processor set. The
+ processor set name port allows to get information about the
+ processor set.
+
+ -- Data type: processor_set_t
+ This is a `mach_port_t' and used to hold the port name of a
+ privileged processor set control port that represents the
+ processor set. Operations on the processor set are implemented as
+ remote procedure calls to the processor set port. The processor
+ set port allows to manipulate the processor set.
+
+
+File: mach.info, Node: Processor Set Access, Next: Processor Set Creation, Prev: Processor Set Ports, Up: Processor Set Interface
+
+9.1.2 Processor Set Access
+--------------------------
+
+ -- Function: kern_return_t host_processor_sets (host_t HOST,
+ processor_set_name_array_t *PROCESSOR_SETS,
+ mach_msg_type_number_t *PROCESSOR_SETS_COUNT)
+ The function `host_processor_sets' gets send rights to the name
+ port for each processor set currently assigned to HOST.
+
+ `host_processor_set_priv' can be used to obtain the control ports
+ from these if desired. PROCESSOR_SETS is an array that is created
+ as a result of this call. The caller may wish to `vm_deallocate'
+ this array when the data is no longer needed.
+ PROCESSOR_SETS_COUNT is set to the number of processor sets in the
+ PROCESSOR_SETS.
+
+ This function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if HOST is not a host.
+
+ -- Function: kern_return_t host_processor_set_priv
+ (host_priv_t HOST_PRIV, processor_set_name_t SET_NAME,
+ processor_set_t *SET)
+ The function `host_processor_set_priv' allows a privileged
+ application to obtain the control port SET for an existing
+ processor set from its name port SET_NAME. The privileged host
+ port HOST_PRIV is required.
+
+ This function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if HOST_PRIV is not a valid host control
+ port.
+
+ -- Function: kern_return_t processor_set_default (host_t HOST,
+ processor_set_name_t *DEFAULT_SET)
+ The function `processor_set_default' returns the default processor
+ set of HOST in DEFAULT_SET. The default processor set is used by
+ all threads, tasks, and processors that are not explicitly
+ assigned to other sets. processor_set_default returns a port that
+ can be used to obtain information about this set (e.g. how many
+ threads are assigned to it). This port cannot be used to perform
+ operations on that set.
+
+ This function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_ARGUMENT' if HOST is not a host and
+ `KERN_INVALID_ADDRESS' if DEFAULT_SET points to inaccessible
+ memory.
+
+
+File: mach.info, Node: Processor Set Creation, Next: Processor Set Destruction, Prev: Processor Set Access, Up: Processor Set Interface
+
+9.1.3 Processor Set Creation
+----------------------------
+
+ -- Function: kern_return_t processor_set_create (host_t HOST,
+ processor_set_t *NEW_SET, processor_set_name_t *NEW_NAME)
+ The function `processor_set_create' creates a new processor set on
+ HOST and returns the two ports associated with it. The port
+ returned in NEW_SET is the actual port representing the set. It
+ is used to perform operations such as assigning processors, tasks,
+ or threads. The port returned in NEW_NAME identifies the set, and
+ is used to obtain information about the set.
+
+ This function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_ARGUMENT' if HOST is not a host,
+ `KERN_INVALID_ADDRESS' if NEW_SET or NEW_NAME points to
+ inaccessible memory and `KERN_FAILURE' is the operating system does
+ not support processor allocation.
+
+
+File: mach.info, Node: Processor Set Destruction, Next: Tasks and Threads on Sets, Prev: Processor Set Creation, Up: Processor Set Interface
+
+9.1.4 Processor Set Destruction
+-------------------------------
+
+ -- Function: kern_return_t processor_set_destroy
+ (processor_set_t PROCESSOR_SET)
+ The function `processor_set_destroy' destroys the specified
+ processor set. Any assigned processors, tasks, or threads are
+ reassigned to the default set. The object port for the processor
+ set is required (not the name port). The default processor set
+ cannot be destroyed.
+
+ This function returns `KERN_SUCCESS' if the set was destroyed,
+ `KERN_FAILURE' if an attempt was made to destroy the default
+ processor set, or the operating system does not support processor
+ allocation, and `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a
+ valid processor set control port.
+
+
+File: mach.info, Node: Tasks and Threads on Sets, Next: Processor Set Priority, Prev: Processor Set Destruction, Up: Processor Set Interface
+
+9.1.5 Tasks and Threads on Sets
+-------------------------------
+
+ -- Function: kern_return_t processor_set_tasks
+ (processor_set_t PROCESSOR_SET, task_array_t *TASK_LIST,
+ mach_msg_type_number_t *TASK_COUNT)
+ The function `processor_set_tasks' gets send rights to the kernel
+ port for each task currently assigned to PROCESSOR_SET.
+
+ TASK_LIST is an array that is created as a result of this call.
+ The caller may wish to `vm_deallocate' this array when the data is
+ no longer needed. TASK_COUNT is set to the number of tasks in the
+ TASK_LIST.
+
+ This function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set.
+
+ -- Function: kern_return_t processor_set_threads
+ (processor_set_t PROCESSOR_SET, thread_array_t *THREAD_LIST,
+ mach_msg_type_number_t *THREAD_COUNT)
+ The function `processor_set_thread' gets send rights to the kernel
+ port for each thread currently assigned to PROCESSOR_SET.
+
+ THREAD_LIST is an array that is created as a result of this call.
+ The caller may wish to `vm_deallocate' this array when the data is
+ no longer needed. THREAD_COUNT is set to the number of threads in
+ the THREAD_LIST.
+
+ This function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set.
+
+ -- Function: kern_return_t task_assign (task_t TASK,
+ processor_set_t PROCESSOR_SET, boolean_t ASSIGN_THREADS)
+ The function `task_assign' assigns TASK the set PROCESSOR_SET.
+ This assignment is for the purposes of determining the initial
+ assignment of newly created threads in task. Any previous
+ assignment of the task is nullified. Existing threads within the
+ task are also reassigned if ASSIGN_THREADS is `TRUE'. They are
+ not affected if it is `FALSE'.
+
+ This function returns `KERN_SUCCESS' if the assignment has been
+ performed and `KERN_INVALID_ARGUMENT' if TASK is not a task, or
+ PROCESSOR_SET is not a processor set on the same host as TASK.
+
+ -- Function: kern_return_t task_assign_default (task_t TASK,
+ boolean_t ASSIGN_THREADS)
+ The function `task_assign_default' is a variant of `task_assign'
+ that assigns the task to the default processor set on that task's
+ host. This variant exists because the control port for the
+ default processor set is privileged and not ususally available to
+ users.
+
+ This function returns `KERN_SUCCESS' if the assignment has been
+ performed and `KERN_INVALID_ARGUMENT' if TASK is not a task.
+
+ -- Function: kern_return_t task_get_assignment (task_t TASK,
+ processor_set_name_t *ASSIGNED_SET)
+ The function `task_get_assignment' returns the name of the
+ processor set to which the thread is currently assigned in
+ ASSIGNED_SET. This port can only be used to obtain information
+ about the processor set.
+
+ This function returns `KERN_SUCCESS' if the assignment has been
+ performed, `KERN_INVALID_ADDRESS' if PROCESSOR_SET points to
+ inaccessible memory, and `KERN_INVALID_ARGUMENT' if TASK is not a
+ task.
+
+ -- Function: kern_return_t thread_assign (thread_t THREAD,
+ processor_set_t PROCESSOR_SET)
+ The function `thread_assign' assigns THREAD the set PROCESSOR_SET.
+ After the assignment is completed, the thread only executes on
+ processors assigned to the designated processor set. If there are
+ no such processors, then the thread is unable to execute. Any
+ previous assignment of the thread is nullified. Unix system call
+ compatibility code may temporarily force threads to execute on the
+ master processor.
+
+ This function returns `KERN_SUCCESS' if the assignment has been
+ performed and `KERN_INVALID_ARGUMENT' if THREAD is not a thread,
+ or PROCESSOR_SET is not a processor set on the same host as THREAD.
+
+ -- Function: kern_return_t thread_assign_default (thread_t THREAD)
+ The function `thread_assign_default' is a variant of
+ `thread_assign' that assigns the thread to the default processor
+ set on that thread's host. This variant exists because the
+ control port for the default processor set is privileged and not
+ ususally available to users.
+
+ This function returns `KERN_SUCCESS' if the assignment has been
+ performed and `KERN_INVALID_ARGUMENT' if THREAD is not a thread.
+
+ -- Function: kern_return_t thread_get_assignment (thread_t THREAD,
+ processor_set_name_t *ASSIGNED_SET)
+ The function `thread_get_assignment' returns the name of the
+ processor set to which the thread is currently assigned in
+ ASSIGNED_SET. This port can only be used to obtain information
+ about the processor set.
+
+ This function returns `KERN_SUCCESS' if the assignment has been
+ performed, `KERN_INVALID_ADDRESS' if PROCESSOR_SET points to
+ inaccessible memory, and `KERN_INVALID_ARGUMENT' if THREAD is not
+ a thread.
+
+
+File: mach.info, Node: Processor Set Priority, Next: Processor Set Policy, Prev: Tasks and Threads on Sets, Up: Processor Set Interface
+
+9.1.6 Processor Set Priority
+----------------------------
+
+ -- Function: kern_return_t processor_set_max_priority
+ (processor_set_t PROCESSOR_SET, int MAX_PRIORITY,
+ boolean_t CHANGE_THREADS)
+ The function `processor_set_max_priority' is used to set the
+ maximum priority for a processor set. The priority of a processor
+ set is used only for newly created threads (thread's maximum
+ priority is set to processor set's) and the assignment of threads
+ to the set (thread's maximum priority is reduced if it exceeds the
+ set's maximum priority, thread's priority is similarly reduced).
+ `processor_set_max_priority' changes this priority. It also sets
+ the maximum priority of all threads assigned to the processor set
+ to this new priority if CHANGE_THREADS is `TRUE'. If this maximum
+ priority is less than the priorities of any of these threads,
+ their priorities will also be set to this new value.
+
+ This function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set or
+ PRIORITY is not a valid priority.
+
+
+File: mach.info, Node: Processor Set Policy, Next: Processor Set Info, Prev: Processor Set Priority, Up: Processor Set Interface
+
+9.1.7 Processor Set Policy
+--------------------------
+
+ -- Function: kern_return_t processor_set_policy_enable
+ (processor_set_t PROCESSOR_SET, int POLICY)
+ -- Function: kern_return_t processor_set_policy_disable
+ (processor_set_t PROCESSOR_SET, int POLICY,
+ boolean_t CHANGE_THREADS)
+ Processor sets may restrict the scheduling policies to be used for
+ threads assigned to them. These two calls provide the mechanism
+ for designating permitted and forbidden policies. The current set
+ of permitted policies can be obtained from `processor_set_info'.
+ Timesharing may not be forbidden by any processor set. This is a
+ compromise to reduce the complexity of the assign operation; any
+ thread whose policy is forbidden by the target processor set has
+ its policy reset to timesharing. If the CHANGE_THREADS argument to
+ `processor_set_policy_disable' is true, threads currently assigned
+ to this processor set and using the newly disabled policy will have
+ their policy reset to timesharing.
+
+ `mach/policy.h' contains the allowed policies; it is included by
+ `mach.h'. Not all policies (e.g. fixed priority) are supported by
+ all systems.
+
+ This function returns `KERN_SUCCESS' if the operation was completed
+ successfully and `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a
+ processor set or POLICY is not a valid policy, or an attempt was
+ made to disable timesharing.
+
+
+File: mach.info, Node: Processor Set Info, Prev: Processor Set Policy, Up: Processor Set Interface
+
+9.1.8 Processor Set Info
+------------------------
+
+ -- Function: kern_return_t processor_set_info
+ (processor_set_name_t SET_NAME, int FLAVOR, host_t *HOST,
+ processor_set_info_t PROCESSOR_SET_INFO,
+ mach_msg_type_number_t *PROCESSOR_SET_INFO_COUNT)
+ The function `processor_set_info' returns the selected information
+ array for a processor set, as specified by FLAVOR.
+
+ HOST is set to the host on which the processor set resides. This
+ is the non-privileged host port.
+
+ PROCESSOR_SET_INFO is an array of integers that is supplied by the
+ caller and returned filled with specified information.
+ PROCESSOR_SET_INFO_COUNT is supplied as the maximum number of
+ integers in PROCESSOR_SET_INFO. On return, it contains the actual
+ number of integers in PROCESSOR_SET_INFO. The maximum number of
+ integers returned by any flavor is `PROCESSOR_SET_INFO_MAX'.
+
+ The type of information returned is defined by FLAVOR, which can
+ be one of the following:
+
+ `PROCESSOR_SET_BASIC_INFO'
+ The function returns basic information about the processor
+ set, as defined by `processor_set_basic_info_t'. This
+ includes the number of tasks and threads assigned to the
+ processor set. The number of integers returned is
+ `PROCESSOR_SET_BASIC_INFO_COUNT'.
+
+ `PROCESSOR_SET_SCHED_INFO'
+ The function returns information about the schduling policy
+ for the processor set as defined by
+ `processor_set_sched_info_t'. The number of integers
+ returned is `PROCESSOR_SET_SCHED_INFO_COUNT'.
+
+ Some machines may define additional (machine-dependent) flavors.
+
+ The function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if PROCESSOR_SET is not a processor set or
+ FLAVOR is not recognized. The function returns
+ `MIG_ARRAY_TOO_LARGE' if the returned info array is too large for
+ PROCESSOR_SET_INFO. In this case, PROCESSOR_SET_INFO is filled as
+ much as possible and PROCESSOR_SET_INFO_COUNT is set to the number
+ of elements that would have been returned if there were enough
+ room.
+
+ -- Data type: struct processor_set_basic_info
+ This structure is returned in PROCESSOR_SET_INFO by the
+ `processor_set_info' function and provides basic information about
+ the processor set. You can cast a variable of type
+ `processor_set_info_t' to a pointer of this type if you provided it
+ as the PROCESSOR_SET_INFO parameter for the
+ `PROCESSOR_SET_BASIC_INFO' flavor of `processor_set_info'. It has
+ the following members:
+
+ `int processor_count'
+ number of processors
+
+ `int task_count'
+ number of tasks
+
+ `int thread_count'
+ number of threads
+
+ `int load_average'
+ scaled load average
+
+ `int mach_factor'
+ scaled mach factor
+
+ -- Data type: processor_set_basic_info_t
+ This is a pointer to a `struct processor_set_basic_info'.
+
+ -- Data type: struct processor_set_sched_info
+ This structure is returned in PROCESSOR_SET_INFO by the
+ `processor_set_info' function and provides schedule information
+ about the processor set. You can cast a variable of type
+ `processor_set_info_t' to a pointer of this type if you provided it
+ as the PROCESSOR_SET_INFO parameter for the
+ `PROCESSOR_SET_SCHED_INFO' flavor of `processor_set_info'. It has
+ the following members:
+
+ `int policies'
+ allowed policies
+
+ `int max_priority'
+ max priority for new threads
+
+ -- Data type: processor_set_sched_info_t
+ This is a pointer to a `struct processor_set_sched_info'.
+
+
+File: mach.info, Node: Processor Interface, Prev: Processor Set Interface, Up: Processors and Processor Sets
+
+9.2 Processor Interface
+=======================
+
+ -- Data type: processor_t
+ This is a `mach_port_t' and used to hold the port name of a
+ processor port that represents the processor. Operations on the
+ processor are implemented as remote procedure calls to the
+ processor port.
+
+* Menu:
+
+* Hosted Processors:: Getting a list of all processors on a host.
+* Processor Control:: Starting, stopping, controlling processors.
+* Processors and Sets:: Combining processors into processor sets.
+* Processor Info:: Obtaining information on processors.
+
+
+File: mach.info, Node: Hosted Processors, Next: Processor Control, Up: Processor Interface
+
+9.2.1 Hosted Processors
+-----------------------
+
+ -- Function: kern_return_t host_processors (host_priv_t HOST_PRIV,
+ processor_array_t *PROCESSOR_LIST,
+ mach_msg_type_number_t *PROCESSOR_COUNT)
+ The function `host_processors' gets send rights to the processor
+ port for each processor existing on HOST_PRIV. This is the
+ privileged port that allows its holder to control a processor.
+
+ PROCESSOR_LIST is an array that is created as a result of this
+ call. The caller may wish to `vm_deallocate' this array when the
+ data is no longer needed. PROCESSOR_COUNT is set to the number of
+ processors in the PROCESSOR_LIST.
+
+ This function returns `KERN_SUCCESS' if the call succeeded,
+ `KERN_INVALID_ARGUMENT' if HOST_PRIV is not a privileged host
+ port, and `KERN_INVALID_ADDRESS' if PROCESSOR_COUNT points to
+ inaccessible memory.
+
+
+File: mach.info, Node: Processor Control, Next: Processors and Sets, Prev: Hosted Processors, Up: Processor Interface
+
+9.2.2 Processor Control
+-----------------------
+
+ -- Function: kern_return_t processor_start (processor_t PROCESSOR)
+ -- Function: kern_return_t processor_exit (processor_t PROCESSOR)
+ -- Function: kern_return_t processor_control (processor_t PROCESSOR,
+ processor_info_t *CMD, mach_msg_type_number_t COUNT)
+ Some multiprocessors may allow privileged software to control
+ processors. The `processor_start', `processor_exit', and
+ `processor_control' operations implement this. The interpretation
+ of the command in CMD is machine dependent. A newly started
+ processor is assigned to the default processor set. An exited
+ processor is removed from the processor set to which it was
+ assigned and ceases to be active.
+
+ COUNT contains the length of the command CMD as a number of ints.
+
+ Availability limited. All of these operations are
+ machine-dependent. They may do nothing. The ability to restart
+ an exited processor is also machine-dependent.
+
+ This function returns `KERN_SUCCESS' if the operation was
+ performed, `KERN_FAILURE' if the operation was not performed (a
+ likely reason is that it is not supported on this processor),
+ `KERN_INVALID_ARGUMENT' if PROCESSOR is not a processor, and
+ `KERN_INVALID_ADDRESS' if CMD points to inaccessible memory.
+
+
+File: mach.info, Node: Processors and Sets, Next: Processor Info, Prev: Processor Control, Up: Processor Interface
+
+9.2.3 Processors and Sets
+-------------------------
+
+ -- Function: kern_return_t processor_assign (processor_t PROCESSOR,
+ processor_set_t PROCESSOR_SET, boolean_t WAIT)
+ The function `processor_assign' assigns PROCESSOR to the the set
+ PROCESSOR_SET. After the assignment is completed, the processor
+ only executes threads that are assigned to that processor set.
+ Any previous assignment of the processor is nullified. The master
+ processor cannot be reassigned. All processors take clock
+ interrupts at all times. The WAIT argument indicates whether the
+ caller should wait for the assignment to be completed or should
+ return immediately. Dedicated kernel threads are used to perform
+ processor assignment, so setting wait to `FALSE' allows assignment
+ requests to be queued and performed faster, especially if the
+ kernel has more than one dedicated internal thread for processor
+ assignment. Redirection of other device interrupts away from
+ processors assigned to other than the default processor set is
+ machine-dependent. Intermediaries that interpose on ports must be
+ sure to interpose on both ports involved in this call if they
+ interpose on either.
+
+ This function returns `KERN_SUCCESS' if the assignment has been
+ performed, `KERN_INVALID_ARGUMENT' if PROCESSOR is not a
+ processor, or PROCESSOR_SET is not a processor set on the same
+ host as PROCESSOR.
+
+ -- Function: kern_return_t processor_get_assignment
+ (processor_t PROCESSOR, processor_set_name_t *ASSIGNED_SET)
+ The function `processor_get_assignment' obtains the current
+ assignment of a processor. The name port of the processor set is
+ returned in ASSIGNED_SET.
+
+
+File: mach.info, Node: Processor Info, Prev: Processors and Sets, Up: Processor Interface
+
+9.2.4 Processor Info
+--------------------
+
+ -- Function: kern_return_t processor_info (processor_t PROCESSOR,
+ int FLAVOR, host_t *HOST, processor_info_t PROCESSOR_INFO,
+ mach_msg_type_number_t *PROCESSOR_INFO_COUNT)
+ The function `processor_info' returns the selected information
+ array for a processor, as specified by FLAVOR.
+
+ HOST is set to the host on which the processor set resides. This
+ is the non-privileged host port.
+
+ PROCESSOR_INFO is an array of integers that is supplied by the
+ caller and returned filled with specified information.
+ PROCESSOR_INFO_COUNT is supplied as the maximum number of integers
+ in PROCESSOR_INFO. On return, it contains the actual number of
+ integers in PROCESSOR_INFO. The maximum number of integers
+ returned by any flavor is `PROCESSOR_INFO_MAX'.
+
+ The type of information returned is defined by FLAVOR, which can
+ be one of the following:
+
+ `PROCESSOR_BASIC_INFO'
+ The function returns basic information about the processor,
+ as defined by `processor_basic_info_t'. This includes the
+ slot number of the processor. The number of integers
+ returned is `PROCESSOR_BASIC_INFO_COUNT'.
+
+ Machines which require more configuration information beyond the
+ slot number are expected to define additional (machine-dependent)
+ flavors.
+
+ The function returns `KERN_SUCCESS' if the call succeeded and
+ `KERN_INVALID_ARGUMENT' if PROCESSOR is not a processor or FLAVOR
+ is not recognized. The function returns `MIG_ARRAY_TOO_LARGE' if
+ the returned info array is too large for PROCESSOR_INFO. In this
+ case, PROCESSOR_INFO is filled as much as possible and
+ PROCESSOR_INFOCNT is set to the number of elements that would have
+ been returned if there were enough room.
+
+ -- Data type: struct processor_basic_info
+ This structure is returned in PROCESSOR_INFO by the
+ `processor_info' function and provides basic information about the
+ processor. You can cast a variable of type `processor_info_t' to a
+ pointer of this type if you provided it as the PROCESSOR_INFO
+ parameter for the `PROCESSOR_BASIC_INFO' flavor of
+ `processor_info'. It has the following members:
+
+ `cpu_type_t cpu_type'
+ cpu type
+
+ `cpu_subtype_t cpu_subtype'
+ cpu subtype
+
+ `boolean_t running'
+ is processor running?
+
+ `int slot_num'
+ slot number
+
+ `boolean_t is_master'
+ is this the master processor
+
+ -- Data type: processor_basic_info_t
+ This is a pointer to a `struct processor_basic_info'.
+
+
+File: mach.info, Node: Device Interface, Next: Kernel Debugger, Prev: Processors and Processor Sets, Up: Top
+
+10 Device Interface
+*******************
+
+The GNU Mach microkernel provides a simple device interface that allows
+the user space programs to access the underlying hardware devices. Each
+device has a unique name, which is a string up to 127 characters long.
+To open a device, the device master port has to be supplied. The device
+master port is only available through the bootstrap port. Anyone who
+has control over the device master port can use all hardware devices.
+
+ -- Data type: device_t
+ This is a `mach_port_t' and used to hold the port name of a device
+ port that represents the device. Operations on the device are
+ implemented as remote procedure calls to the device port. Each
+ device provides a sequence of records. The length of a record is
+ specific to the device. Data can be transferred "out-of-line" or
+ "in-line" (*note Memory::).
+
+ All constants and functions in this chapter are defined in
+`device/device.h'.
+
+* Menu:
+
+* Device Reply Server:: Handling device reply messages.
+* Device Open:: Opening hardware devices.
+* Device Close:: Closing hardware devices.
+* Device Read:: Reading data from the device.
+* Device Write:: Writing data to the device.
+* Device Map:: Mapping devices into virtual memory.
+* Device Status:: Querying and manipulating a device.
+* Device Filter:: Filtering packets arriving on a device.
+
+
+File: mach.info, Node: Device Reply Server, Next: Device Open, Up: Device Interface
+
+10.1 Device Reply Server
+========================
+
+Beside the usual synchronous interface, an asynchronous interface is
+provided. For this, the caller has to receive and handle the reply
+messages seperately from the function call.
+
+ -- Function: boolean_t device_reply_server (msg_header_t *IN_MSG,
+ msg_header_t *OUT_MSG)
+ The function `device_reply_server' is produced by the remote
+ procedure call generator to handle a received message. This
+ function does all necessary argument handling, and actually calls
+ one of the following functions: `ds_device_open_reply',
+ `ds_device_read_reply', `ds_device_read_reply_inband',
+ `ds_device_write_reply' and `ds_device_write_reply_inband'.
+
+ The IN_MSG argument is the message that has been received from the
+ kernel. The OUT_MSG is a reply message, but this is not used for
+ this server.
+
+ The function returns `TRUE' to indicate that the message in
+ question was applicable to this interface, and that the appropriate
+ routine was called to interpret the message. It returns `FALSE' to
+ indicate that the message did not apply to this interface, and
+ that no other action was taken.
+
+
+File: mach.info, Node: Device Open, Next: Device Close, Prev: Device Reply Server, Up: Device Interface
+
+10.2 Device Open
+================
+
+ -- Function: kern_return_t device_open (mach_port_t MASTER_PORT,
+ dev_mode_t MODE, dev_name_t NAME, device_t *DEVICE)
+ The function `device_open' opens the device NAME and returns a
+ port to it in DEVICE. The open count for the device is
+ incremented by one. If the open count was 0, the open handler for
+ the device is invoked.
+
+ MASTER_PORT must hold the master device port. NAME specifies the
+ device to open, and is a string up to 128 characters long. MODE
+ is the open mode. It is a bitwise-or of the following constants:
+
+ `D_READ'
+ Request read access for the device.
+
+ `D_WRITE'
+ Request write access for the device.
+
+ `D_NODELAY'
+ Do not delay an open.
+
+ The function returns `D_SUCCESS' if the device was successfully
+ opened, `D_INVALID_OPERATION' if MASTER_PORT is not the master
+ device port, `D_WOULD_BLOCK' is the device is busy and `D_NOWAIT'
+ was specified in mode, `D_ALREADY_OPEN' if the device is already
+ open in an incompatible mode and `D_NO_SUCH_DEVICE' if NAME does
+ not denote a know device.
+
+ -- Function: kern_return_t device_open_request
+ (mach_port_t MASTER_PORT, mach_port_t REPLY_PORT,
+ dev_mode_t MODE, dev_name_t NAME)
+ -- Function: kern_return_t ds_device_open_reply
+ (mach_port_t REPLY_PORT, kern_return_t RETURN,
+ device_t *DEVICE)
+ This is the asynchronous form of the `device_open' function.
+ `device_open_request' performs the open request. The meaning for
+ the parameters is as in `device_open'. Additionally, the caller
+ has to supply a reply port to which the `ds_device_open_reply'
+ message is sent by the kernel when the open has been performed.
+ The return value of the open operation is stored in RETURN_CODE.
+
+ As neither function receives a reply message, only message
+ transmission errors apply. If no error occurs, `KERN_SUCCESS' is
+ returned.
+
+
+File: mach.info, Node: Device Close, Next: Device Read, Prev: Device Open, Up: Device Interface
+
+10.3 Device Close
+=================
+
+ -- Function: kern_return_t device_close (device_t DEVICE)
+ The function `device_close' decrements the open count of the device
+ by one. If the open count drops to zero, the close handler for the
+ device is called. The device to close is specified by its port
+ DEVICE.
+
+ The function returns `D_SUCCESS' if the device was successfully
+ closed and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
+ port.
+
+
+File: mach.info, Node: Device Read, Next: Device Write, Prev: Device Close, Up: Device Interface
+
+10.4 Device Read
+================
+
+ -- Function: kern_return_t device_read (device_t DEVICE,
+ dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED,
+ io_buf_ptr_t *DATA, mach_msg_type_number_t *DATA_COUNT)
+ The function `device_read' reads BYTES_WANTED bytes from DEVICE,
+ and stores them in a buffer allocated with `vm_allocate', which
+ address is returned in DATA. The caller must deallocated it if it
+ is no longer needed. The number of bytes actually returned is
+ stored in DATA_COUNT.
+
+ If MODE is `D_NOWAIT', the operation does not block. Otherwise
+ MODE should be 0. RECNUM is the record number to be read, its
+ meaning is device specific.
+
+ The function returns `D_SUCCESS' if some data was successfully
+ read, `D_WOULD_BLOCK' if no data is currently available and
+ `D_NOWAIT' is specified, and `D_NO_SUCH_DEVICE' if DEVICE does not
+ denote a device port.
+
+ -- Function: kern_return_t device_read_inband (device_t DEVICE,
+ dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED,
+ io_buf_ptr_inband_t *DATA, mach_msg_type_number_t *DATA_COUNT)
+ The `device_read_inband' function works as the `device_read'
+ function, except that the data is returned "in-line" in the reply
+ IPC message (*note Memory::).
+
+ -- Function: kern_return_t device_read_request (device_t DEVICE,
+ mach_port_t REPLY_PORT, dev_mode_t MODE, recnum_t RECNUM,
+ int BYTES_WANTED)
+ -- Function: kern_return_t ds_device_read_reply
+ (mach_port_t REPLY_PORT, kern_return_t RETURN_CODE,
+ io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT)
+ This is the asynchronous form of the `device_read' function.
+ `device_read_request' performs the read request. The meaning for
+ the parameters is as in `device_read'. Additionally, the caller
+ has to supply a reply port to which the `ds_device_read_reply'
+ message is sent by the kernel when the read has been performed.
+ The return value of the read operation is stored in RETURN_CODE.
+
+ As neither function receives a reply message, only message
+ transmission errors apply. If no error occurs, `KERN_SUCCESS' is
+ returned.
+
+ -- Function: kern_return_t device_read_request_inband
+ (device_t DEVICE, mach_port_t REPLY_PORT, dev_mode_t MODE,
+ recnum_t RECNUM, int BYTES_WANTED)
+ -- Function: kern_return_t ds_device_read_reply_inband
+ (mach_port_t REPLY_PORT, kern_return_t RETURN_CODE,
+ io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT)
+ The `device_read_request_inband' and `ds_device_read_reply_inband'
+ functions work as the `device_read_request' and
+ `ds_device_read_reply' functions, except that the data is returned
+ "in-line" in the reply IPC message (*note Memory::).
+
+
+File: mach.info, Node: Device Write, Next: Device Map, Prev: Device Read, Up: Device Interface
+
+10.5 Device Write
+=================
+
+ -- Function: kern_return_t device_write (device_t DEVICE,
+ dev_mode_t MODE, recnum_t RECNUM, io_buf_ptr_t DATA,
+ mach_msg_type_number_t DATA_COUNT, int *BYTES_WRITTEN)
+ The function `device_write' writes DATA_COUNT bytes from the
+ buffer DATA to DEVICE. The number of bytes actually written is
+ returned in BYTES_WRITTEN.
+
+ If MODE is `D_NOWAIT', the function returns without waiting for
+ I/O completion. Otherwise MODE should be 0. RECNUM is the record
+ number to be written, its meaning is device specific.
+
+ The function returns `D_SUCCESS' if some data was successfully
+ written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
+ port or the device is dead or not completely open.
+
+ -- Function: kern_return_t device_write_inband (device_t DEVICE,
+ dev_mode_t MODE, recnum_t RECNUM, int BYTES_WANTED,
+ io_buf_ptr_inband_t *DATA, mach_msg_type_number_t *DATA_COUNT)
+ The `device_write_inband' function works as the `device_write'
+ function, except that the data is sent "in-line" in the request IPC
+ message (*note Memory::).
+
+ -- Function: kern_return_t device_write_request (device_t DEVICE,
+ mach_port_t REPLY_PORT, dev_mode_t MODE, recnum_t RECNUM,
+ io_buf_ptr_t DATA, mach_msg_type_number_t DATA_COUNT)
+ -- Function: kern_return_t ds_device_write_reply
+ (mach_port_t REPLY_PORT, kern_return_t RETURN_CODE,
+ int BYTES_WRITTEN)
+ This is the asynchronous form of the `device_write' function.
+ `device_write_request' performs the write request. The meaning for
+ the parameters is as in `device_write'. Additionally, the caller
+ has to supply a reply port to which the `ds_device_write_reply'
+ message is sent by the kernel when the write has been performed.
+ The return value of the write operation is stored in RETURN_CODE.
+
+ As neither function receives a reply message, only message
+ transmission errors apply. If no error occurs, `KERN_SUCCESS' is
+ returned.
+
+ -- Function: kern_return_t device_write_request_inband
+ (device_t DEVICE, mach_port_t REPLY_PORT, dev_mode_t MODE,
+ recnum_t RECNUM, io_buf_ptr_t DATA,
+ mach_msg_type_number_t DATA_COUNT)
+ -- Function: kern_return_t ds_device_write_reply_inband
+ (mach_port_t REPLY_PORT, kern_return_t RETURN_CODE,
+ int BYTES_WRITTEN)
+ The `device_write_request_inband' and
+ `ds_device_write_reply_inband' functions work as the
+ `device_write_request' and `ds_device_write_reply' functions,
+ except that the data is sent "in-line" in the request IPC message
+ (*note Memory::).
+
+
+File: mach.info, Node: Device Map, Next: Device Status, Prev: Device Write, Up: Device Interface
+
+10.6 Device Map
+===============
+
+ -- Function: kern_return_t device_map (device_t DEVICE,
+ vm_prot_t PROT, vm_offset_t OFFSET, vm_size_t SIZE,
+ mach_port_t *PAGER, int UNMAP)
+ The function `device_map' creates a new memory manager for DEVICE
+ and returns a port to it in PAGER. The memory manager is usable
+ as a memory object in a `vm_map' call. The call is device
+ dependant.
+
+ The protection for the memory object is specified by PROT. The
+ memory object starts at OFFSET within the device and extends SIZE
+ bytes. UNMAP is currently unused.
+
+ The function returns `D_SUCCESS' if some data was successfully
+ written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
+ port or the device is dead or not completely open.
+
+
+File: mach.info, Node: Device Status, Next: Device Filter, Prev: Device Map, Up: Device Interface
+
+10.7 Device Status
+==================
+
+ -- Function: kern_return_t device_set_status (device_t DEVICE,
+ dev_flavor_t FLAVOR, dev_status_t STATUS,
+ mach_msg_type_number_t STATUS_COUNT)
+ The function `device_set_status' sets the status of a device. The
+ possible values for FLAVOR and their interpretation is device
+ specific.
+
+ The function returns `D_SUCCESS' if some data was successfully
+ written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
+ port or the device is dead or not completely open.
+
+ -- Function: kern_return_t device_get_status (device_t DEVICE,
+ dev_flavor_t FLAVOR, dev_status_t STATUS,
+ mach_msg_type_number_t *STATUS_COUNT)
+ The function `device_get_status' gets the status of a device. The
+ possible values for FLAVOR and their interpretation is device
+ specific.
+
+ The function returns `D_SUCCESS' if some data was successfully
+ written and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
+ port or the device is dead or not completely open.
+
+
+File: mach.info, Node: Device Filter, Prev: Device Status, Up: Device Interface
+
+10.8 Device Filter
+==================
+
+ -- Function: kern_return_t device_set_filter (device_t DEVICE,
+ mach_port_t RECEIVE_PORT,
+ mach_msg_type_name_t RECEIVE_PORT_TYPE, int PRIORITY,
+ filter_array_t FILTER, mach_msg_type_number_t FILTER_COUNT)
+ The function `device_set_filter' makes it possible to filter out
+ selected data arriving at the device and forward it to a port.
+ FILTER is a list of filter commands, which are applied to incoming
+ data to determine if the data should be sent to RECEIVE_PORT. The
+ IPC type of the send right is specified by RECEIVE_PORT_RIGHT, it
+ is either `MACH_MSG_TYPE_MAKE_SEND' or `MACH_MSG_TYPE_MOVE_SEND'.
+ The PRIORITY value is used to order multiple filters.
+
+ There can be up to `NET_MAX_FILTER' commands in FILTER. The
+ actual number of commands is passed in FILTER_COUNT. For the
+ purpose of the filter test, an internal stack is provided. After
+ all commands have been processed, the value on the top of the stack
+ determines if the data is forwarded or the next filter is tried.
+
+ Each word of the command list specifies a data (push) operation
+ (high order NETF_NBPO bits) as well as a binary operator (low
+ order NETF_NBPA bits). The value to be pushed onto the stack is
+ chosen as follows.
+
+ `NETF_PUSHLIT'
+ Use the next short word of the filter as the value.
+
+ `NETF_PUSHZERO'
+ Use 0 as the value.
+
+ `NETF_PUSHWORD+N'
+ Use short word N of the "data" portion of the message as the
+ value.
+
+ `NETF_PUSHHDR+N'
+ Use short word N of the "header" portion of the message as
+ the value.
+
+ `NETF_PUSHIND+N'
+ Pops the top long word from the stack and then uses short
+ word N of the "data" portion of the message as the value.
+
+ `NETF_PUSHHDRIND+N'
+ Pops the top long word from the stack and then uses short
+ word N of the "header" portion of the message as the value.
+
+ `NETF_PUSHSTK+N'
+ Use long word N of the stack (where the top of stack is long
+ word 0) as the value.
+
+ `NETF_NOPUSH'
+ Don't push a value.
+
+ The unsigned value so chosen is promoted to a long word before
+ being pushed. Once a value is pushed (except for the case of
+ `NETF_NOPUSH'), the top two long words of the stack are popped and
+ a binary operator applied to them (with the old top of stack as the
+ second operand). The result of the operator is pushed on the
+ stack. These operators are:
+
+ `NETF_NOP'
+ Don't pop off any values and do no operation.
+
+ `NETF_EQ'
+ Perform an equal comparison.
+
+ `NETF_LT'
+ Perform a less than comparison.
+
+ `NETF_LE'
+ Perform a less than or equal comparison.
+
+ `NETF_GT'
+ Perform a greater than comparison.
+
+ `NETF_GE'
+ Perform a greater than or equal comparison.
+
+ `NETF_AND'
+ Perform a bitise boolean AND operation.
+
+ `NETF_OR'
+ Perform a bitise boolean inclusive OR operation.
+
+ `NETF_XOR'
+ Perform a bitise boolean exclusive OR operation.
+
+ `NETF_NEQ'
+ Perform a not equal comparison.
+
+ `NETF_LSH'
+ Perform a left shift operation.
+
+ `NETF_RSH'
+ Perform a right shift operation.
+
+ `NETF_ADD'
+ Perform an addition.
+
+ `NETF_SUB'
+ Perform a subtraction.
+
+ `NETF_COR'
+ Perform an equal comparison. If the comparison is `TRUE',
+ terminate the filter list. Otherwise, pop the result of the
+ comparison off the stack.
+
+ `NETF_CAND'
+ Perform an equal comparison. If the comparison is `FALSE',
+ terminate the filter list. Otherwise, pop the result of the
+ comparison off the stack.
+
+ `NETF_CNOR'
+ Perform a not equal comparison. If the comparison is `FALSE',
+ terminate the filter list. Otherwise, pop the result of the
+ comparison off the stack.
+
+ `NETF_CNAND'
+ Perform a not equal comparison. If the comparison is `TRUE',
+ terminate the filter list. Otherwise, pop the result of the
+ comparison off the stack. The scan of the filter list
+ terminates when the filter list is emptied, or a `NETF_C...'
+ operation terminates the list. At this time, if the final
+ value of the top of the stack is `TRUE', then the message is
+ accepted for the filter.
+
+ The function returns `D_SUCCESS' if some data was successfully
+ written, `D_INVALID_OPERATION' if RECEIVE_PORT is not a valid send
+ right, and `D_NO_SUCH_DEVICE' if DEVICE does not denote a device
+ port or the device is dead or not completely open.
+
+
+File: mach.info, Node: Kernel Debugger, Next: Copying, Prev: Device Interface, Up: Top
+
+11 Kernel Debugger
+******************
+
+The GNU Mach kernel debugger `ddb' is a powerful built-in debugger with
+a gdb like syntax. It is enabled at compile time using the
+`--enable-kdb' option. Whenever you want to enter the debugger while
+running the kernel, you can press the key combination <Ctrl-Alt-D>.
+
+* Menu:
+
+* Operation:: Basic architecture of the kernel debugger.
+* Commands:: Available commands in the kernel debugger.
+* Variables:: Access of variables from the kernel debugger.
+* Expressions:: Usage of expressions in the kernel debugger.
+
+
+File: mach.info, Node: Operation, Next: Commands, Up: Kernel Debugger
+
+11.1 Operation
+==============
+
+The current location is called "dot". The dot is displayed with a
+hexadecimal format at a prompt. Examine and write commands update dot
+to the address of the last line examined or the last location modified,
+and set "next" to the address of the next location to be examined or
+changed. Other commands don't change dot, and set next to be the same
+as dot.
+
+ The general command syntax is:
+
+ COMMAND[/MODIFIER] ADDRESS [,COUNT]
+
+ `!!' repeats the previous command, and a blank line repeats from the
+address next with count 1 and no modifiers. Specifying ADDRESS sets
+dot to the address. Omitting ADDRESS uses dot. A missing COUNT is
+taken to be 1 for printing commands or infinity for stack traces.
+
+ Current `ddb' is enhanced to support multi-thread debugging. A
+break point can be set only for a specific thread, and the address space
+or registers of non current thread can be examined or modified if
+supported by machine dependent routines. For example,
+
+ break/t mach_msg_trap $task11.0
+
+ sets a break point at `mach_msg_trap' for the first thread of task
+11 listed by a `show all threads' command.
+
+ In the above example, `$task11.0' is translated to the corresponding
+thread structure's address by variable translation mechanism described
+later. If a default target thread is set in a variable `$thread', the
+`$task11.0' can be omitted. In general, if `t' is specified in a
+modifier of a command line, a specified thread or a default target
+thread is used as a target thread instead of the current one. The `t'
+modifier in a command line is not valid in evaluating expressions in a
+command line. If you want to get a value indirectly from a specific
+thread's address space or access to its registers within an expression,
+you have to specify a default target thread in advance, and to use `:t'
+modifier immediately after the indirect access or the register
+reference like as follows:
+
+ set $thread $task11.0
+ print $eax:t *(0x100):tuh
+
+ No sign extension and indirection `size(long, half word, byte)' can
+be specified with `u', `l', `h' and `b' respectively for the indirect
+access.
+
+ Note: Support of non current space/register access and user space
+break point depend on the machines. If not supported, attempts of such
+operation may provide incorrect information or may cause strange
+behavior. Even if supported, the user space access is limited to the
+pages resident in the main memory at that time. If a target page is not
+in the main memory, an error will be reported.
+
+ `ddb' has a feature like a command `more' for the output. If an
+output line exceeds the number set in the `$lines' variable, it
+displays `--db_more--' and waits for a response. The valid responses
+for it are:
+
+`<SPC>'
+ one more page
+
+`<RET>'
+ one more line
+
+`q'
+ abort the current command, and return to the command input mode
+
diff --git a/doc/mach.info-2 b/doc/mach.info-2
new file mode 100644
index 0000000..806539f
--- /dev/null
+++ b/doc/mach.info-2
@@ -0,0 +1,1663 @@
+This is ../doc/mach.info, produced by makeinfo version 4.8 from
+../doc/mach.texi.
+
+INFO-DIR-SECTION Kernel
+START-INFO-DIR-ENTRY
+* GNUMach: (mach). Using and programming the GNU Mach microkernel.
+END-INFO-DIR-ENTRY
+
+ This file documents the GNU Mach microkernel.
+
+ This is Edition 0.4, last updated 2001-09-01, of `The GNU Mach
+Reference Manual', for Version 1.3.99.
+
+ Copyright (C) 2001 Free Software Foundation, Inc.
+
+ Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being "Free Software Needs Free Documentation" and
+"GNU Lesser General Public License", the Front-Cover texts being (a)
+(see below), and with the Back-Cover Texts being (b) (see below). A
+copy of the license is included in the section entitled "GNU Free
+Documentation License".
+
+ (a) The FSF's Front-Cover Text is:
+
+ A GNU Manual
+
+ (b) The FSF's Back-Cover Text is:
+
+ You have freedom to copy and modify this GNU Manual, like GNU
+software. Copies published by the Free Software Foundation raise
+funds for GNU development.
+
+ This work is based on manual pages under the following copyright and
+license:
+
+Mach Operating System
+Copyright (C) 1991,1990 Carnegie Mellon University
+All Rights Reserved.
+
+ Permission to use, copy, modify and distribute this software and its
+documentation is hereby granted, provided that both the copyright
+notice and this permission notice appear in all copies of the software,
+derivative works or modified versions, and any portions thereof, and
+that both notices appear in supporting documentation.
+
+ CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
+CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY
+DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
+
+
+File: mach.info, Node: Commands, Next: Variables, Prev: Operation, Up: Kernel Debugger
+
+11.2 Commands
+=============
+
+`examine(x) [/MODIFIER] ADDR[,COUNT] [ THREAD ]'
+ Display the addressed locations according to the formats in the
+ modifier. Multiple modifier formats display multiple locations.
+ If no format is specified, the last formats specified for this
+ command is used. Address space other than that of the current
+ thread can be specified with `t' option in the modifier and THREAD
+ parameter. The format characters are
+
+ `b'
+ look at by bytes(8 bits)
+
+ `h'
+ look at by half words(16 bits)
+
+ `l'
+ look at by long words(32 bits)
+
+ `a'
+ print the location being displayed
+
+ `,'
+ skip one unit producing no output
+
+ `A'
+ print the location with a line number if possible
+
+ `x'
+ display in unsigned hex
+
+ `z'
+ display in signed hex
+
+ `o'
+ display in unsigned octal
+
+ `d'
+ display in signed decimal
+
+ `u'
+ display in unsigned decimal
+
+ `r'
+ display in current radix, signed
+
+ `c'
+ display low 8 bits as a character. Non-printing characters
+ are displayed as an octal escape code (e.g. '\000').
+
+ `s'
+ display the null-terminated string at the location.
+ Non-printing characters are displayed as octal escapes.
+
+ `m'
+ display in unsigned hex with character dump at the end of
+ each line. The location is also displayed in hex at the
+ beginning of each line.
+
+ `i'
+ display as an instruction
+
+ `I'
+ display as an instruction with possible alternate formats
+ depending on the machine:
+
+ `vax'
+ don't assume that each external label is a procedure
+ entry mask
+
+ `i386'
+ don't round to the next long word boundary
+
+ `mips'
+ print register contents
+
+`xf'
+ Examine forward. It executes an examine command with the last
+ specified parameters to it except that the next address displayed
+ by it is used as the start address.
+
+`xb'
+ Examine backward. It executes an examine command with the last
+ specified parameters to it except that the last start address
+ subtracted by the size displayed by it is used as the start
+ address.
+
+`print[/axzodurc] ADDR1 [ ADDR2 ... ]'
+ Print ADDR's according to the modifier character. Valid formats
+ are: `a' `x' `z' `o' `d' `u' `r' `c'. If no modifier is
+ specified, the last one specified to it is used. ADDR can be a
+ string, and it is printed as it is. For example,
+
+ print/x "eax = " $eax "\necx = " $ecx "\n"
+
+ will print like
+
+ eax = xxxxxx
+ ecx = yyyyyy
+
+`write[/bhlt] ADDR [ THREAD ] EXPR1 [ EXPR2 ... ]'
+ Write the expressions at succeeding locations. The write unit
+ size can be specified in the modifier with a letter b (byte), h
+ (half word) or l(long word) respectively. If omitted, long word
+ is assumed. Target address space can also be specified with `t'
+ option in the modifier and THREAD parameter. Warning: since there
+ is no delimiter between expressions, strange things may happen.
+ It's best to enclose each expression in parentheses.
+
+`set $VARIABLE [=] EXPR'
+ Set the named variable or register with the value of EXPR. Valid
+ variable names are described below.
+
+`break[/tuTU] ADDR[,COUNT] [ THREAD1 ... ]'
+ Set a break point at ADDR. If count is supplied, continues
+ (COUNT-1) times before stopping at the break point. If the break
+ point is set, a break point number is printed with `#'. This
+ number can be used in deleting the break point or adding
+ conditions to it.
+
+ `t'
+ Set a break point only for a specific thread. The thread is
+ specified by THREAD parameter, or default one is used if the
+ parameter is omitted.
+
+ `u'
+ Set a break point in user space address. It may be combined
+ with `t' or `T' option to specify the non-current target user
+ space. Without `u' option, the address is considered in the
+ kernel space, and wrong space address is rejected with an
+ error message. This option can be used only if it is
+ supported by machine dependent routines.
+
+ `T'
+ Set a break point only for threads in a specific task. It is
+ like `t' option except that the break point is valid for all
+ threads which belong to the same task as the specified target
+ thread.
+
+ `U'
+ Set a break point in shared user space address. It is like
+ `u' option, except that the break point is valid for all
+ threads which share the same address space even if `t' option
+ is specified. `t' option is used only to specify the target
+ shared space. Without `t' option, `u' and `U' have the same
+ meanings. `U' is useful for setting a user space break point
+ in non-current address space with `t' option such as in an
+ emulation library space. This option can be used only if it
+ is supported by machine dependent routines.
+
+ Warning: if a user text is shadowed by a normal user space
+ debugger, user space break points may not work correctly. Setting
+ a break point at the low-level code paths may also cause strange
+ behavior.
+
+`delete[/tuTU] ADDR|#NUMBER [ THREAD1 ... ]'
+ Delete the break point. The target break point can be specified
+ by a break point number with `#', or by ADDR like specified in
+ `break' command.
+
+`cond #NUMBER [ CONDITION COMMANDS ]'
+ Set or delete a condition for the break point specified by the
+ NUMBER. If the CONDITION and COMMANDS are null, the condition is
+ deleted. Otherwise the condition is set for it. When the break
+ point is hit, the CONDITION is evaluated. The COMMANDS will be
+ executed if the condition is true and the break point count set by
+ a break point command becomes zero. COMMANDS is a list of
+ commands separated by semicolons. Each command in the list is
+ executed in that order, but if a `continue' command is executed,
+ the command execution stops there, and the stopped thread resumes
+ execution. If the command execution reaches the end of the list,
+ and it enters into a command input mode. For example,
+
+ set $work0 0
+ break/Tu xxx_start $task7.0
+ cond #1 (1) set $work0 1; set $work1 0; cont
+ break/T vm_fault $task7.0
+ cond #2 ($work0) set $work1 ($work1+1); cont
+ break/Tu xxx_end $task7.0
+ cond #3 ($work0) print $work1 " faults\n"; set $work0 0
+ cont
+
+ will print page fault counts from `xxx_start' to `xxx_end' in
+ `task7'.
+
+`step[/p] [,COUNT]'
+ Single step COUNT times. If `p' option is specified, print each
+ instruction at each step. Otherwise, only print the last
+ instruction.
+
+ Warning: depending on machine type, it may not be possible to
+ single-step through some low-level code paths or user space code.
+ On machines with software-emulated single-stepping (e.g., pmax),
+ stepping through code executed by interrupt handlers will probably
+ do the wrong thing.
+
+`continue[/c]'
+ Continue execution until a breakpoint or watchpoint. If `/c',
+ count instructions while executing. Some machines (e.g., pmax)
+ also count loads and stores.
+
+ Warning: when counting, the debugger is really silently
+ single-stepping. This means that single-stepping on low-level
+ code may cause strange behavior.
+
+`until'
+ Stop at the next call or return instruction.
+
+`next[/p]'
+ Stop at the matching return instruction. If `p' option is
+ specified, print the call nesting depth and the cumulative
+ instruction count at each call or return. Otherwise, only print
+ when the matching return is hit.
+
+`match[/p]'
+ A synonym for `next'.
+
+`trace[/tu] [ FRAME_ADDR|THREAD ][,COUNT]'
+ Stack trace. `u' option traces user space; if omitted, only traces
+ kernel space. If `t' option is specified, it shows the stack trace
+ of the specified thread or a default target thread. Otherwise, it
+ shows the stack trace of the current thread from the frame address
+ specified by a parameter or from the current frame. COUNT is the
+ number of frames to be traced. If the COUNT is omitted, all
+ frames are printed.
+
+ Warning: If the target thread's stack is not in the main memory at
+ that time, the stack trace will fail. User space stack trace is
+ valid only if the machine dependent code supports it.
+
+`search[/bhl] ADDR VALUE [MASK] [,COUNT]'
+ Search memory for a value. This command might fail in interesting
+ ways if it doesn't find the searched-for value. This is because
+ `ddb' doesn't always recover from touching bad memory. The
+ optional count argument limits the search.
+
+`macro NAME COMMANDS'
+ Define a debugger macro as NAME. COMMANDS is a list of commands
+ to be associated with the macro. In the expressions of the
+ command list, a variable `$argxx' can be used to get a parameter
+ passed to the macro. When a macro is called, each argument is
+ evaluated as an expression, and the value is assigned to each
+ parameter, `$arg1', `$arg2', ... respectively. 10 `$arg'
+ variables are reserved to each level of macros, and they can be
+ used as local variables. The nesting of macro can be allowed up
+ to 5 levels. For example,
+
+ macro xinit set $work0 $arg1
+ macro xlist examine/m $work0,4; set $work0 *($work0)
+ xinit *(xxx_list)
+ xlist
+ ....
+
+ will print the contents of a list starting from `xxx_list' by each
+ `xlist' command.
+
+`dmacro NAME'
+ Delete the macro named NAME.
+
+`show all threads[/ul]'
+ Display all tasks and threads information. This version of `ddb'
+ prints more information than previous one. It shows UNIX process
+ information like `ps' for each task. The UNIX process information
+ may not be shown if it is not supported in the machine, or the
+ bottom of the stack of the target task is not in the main memory at
+ that time. It also shows task and thread identification numbers.
+ These numbers can be used to specify a task or a thread
+ symbolically in various commands. The numbers are valid only in
+ the same debugger session. If the execution is resumed again, the
+ numbers may change. The current thread can be distinguished from
+ others by a `#' after the thread id instead of `:'. Without `l'
+ option, it only shows thread id, thread structure address and the
+ status for each thread. The status consists of 5 letters, R(run),
+ W(wait), S(sus­ pended), O(swapped out) and N(interruptible), and
+ if corresponding status bit is off, `.' is printed instead. If
+ `l' option is specified, more detail information is printed for
+ each thread.
+
+`show task [ ADDR ]'
+ Display the information of a task specified by ADDR. If ADDR is
+ omitted, current task information is displayed.
+
+`show thread [ ADDR ]'
+ Display the information of a thread specified by ADDR. If ADDR is
+ omitted, current thread information is displayed.
+
+`show registers[/tu [ THREAD ]]'
+ Display the register set. Target thread can be specified with `t'
+ option and THREAD parameter. If `u' option is specified, it
+ displays user registers instead of kernel or currently saved one.
+
+ Warning: The support of `t' and `u' option depends on the machine.
+ If not supported, incorrect information will be displayed.
+
+`show map ADDR'
+ Prints the `vm_map' at ADDR.
+
+`show object ADDR'
+ Prints the `vm_object' at ADDR.
+
+`show page ADDR'
+ Prints the `vm_page' structure at ADDR.
+
+`show port ADDR'
+ Prints the `ipc_port' structure at ADDR.
+
+`show ipc_port[/t [ THREAD ]]'
+ Prints all `ipc_port' structure's addresses the target thread has.
+ The target thread is a current thread or that specified by a
+ parameter.
+
+`show macro [ NAME ]'
+ Show the definitions of macros. If NAME is specified, only the
+ definition of it is displayed. Otherwise, definitions of all
+ macros are displayed.
+
+`show watches'
+ Displays all watchpoints.
+
+`watch[/T] ADDR,SIZE [ TASK ]'
+ Set a watchpoint for a region. Execution stops when an attempt to
+ modify the region occurs. The SIZE argument defaults to 4.
+ Without `T' option, ADDR is assumed to be a kernel address. If
+ you want to set a watch point in user space, specify `T' and TASK
+ parameter where the address belongs to. If the TASK parameter is
+ omitted, a task of the default target thread or a current task is
+ assumed. If you specify a wrong space address, the request is
+ rejected with an error message.
+
+ Warning: Attempts to watch wired kernel memory may cause
+ unrecoverable error in some systems such as i386. Watchpoints on
+ user addresses work best.
+
+
+File: mach.info, Node: Variables, Next: Expressions, Prev: Commands, Up: Kernel Debugger
+
+11.3 Variables
+==============
+
+The debugger accesses registers and variables as $NAME. Register names
+are as in the `show registers' command. Some variables are suffixed
+with numbers, and may have some modifier following a colon immediately
+after the variable name. For example, register variables can have `u'
+and `t' modifier to indicate user register and that of a default target
+thread instead of that of the current thread (e.g. `$eax:tu').
+
+ Built-in variables currently supported are:
+
+`taskXX[.YY]'
+ Task or thread structure address. XX and YY are task and thread
+ identification numbers printed by a `show all threads' command
+ respectively. This variable is read only.
+
+`thread'
+ The default target thread. The value is used when `t' option is
+ specified without explicit thread structure address parameter in
+ command lines or expression evaluation.
+
+`radix'
+ Input and output radix
+
+`maxoff'
+ Addresses are printed as SYMBOL+OFFSET unless offset is greater
+ than maxoff.
+
+`maxwidth'
+ The width of the displayed line.
+
+`lines'
+ The number of lines. It is used by `more' feature.
+
+`tabstops'
+ Tab stop width.
+
+`argXX'
+ Parameters passed to a macro. XX can be 1 to 10.
+
+`workXX'
+ Work variable. XX can be 0 to 31.
+
+
+File: mach.info, Node: Expressions, Prev: Variables, Up: Kernel Debugger
+
+11.4 Expressions
+================
+
+Almost all expression operators in C are supported except `~', `^', and
+unary `&'. Special rules in `ddb' are:
+
+`IDENTIFIER'
+ name of a symbol. It is translated to the address(or value) of it.
+ `.' and `:' can be used in the identifier. If supported by an
+ object format dependent routine, [FILE_NAME:]FUNC[:LINE_NUMBER]
+ [FILE_NAME:]VARIABLE, and FILE_NAME[:LINE_NUMBER] can be accepted
+ as a symbol. The symbol may be prefixed with
+ `SYMBOL_TABLE_NAME::' like `emulator::mach_msg_trap' to specify
+ other than kernel symbols.
+
+`NUMBER'
+ radix is determined by the first two letters:
+ `0x'
+ hex
+
+ `0o'
+ octal
+
+ `0t'
+ decimal
+
+ otherwise, follow current radix.
+
+`.'
+ dot
+
+`+'
+ next
+
+`..'
+ address of the start of the last line examined. Unlike dot or
+ next, this is only changed by `examine' or `write' command.
+
+`´'
+ last address explicitly specified.
+
+`$VARIABLE'
+ register name or variable. It is translated to the value of it.
+ It may be followed by a `:' and modifiers as described above.
+
+`a'
+ multiple of right hand side.
+
+`*EXPR'
+ indirection. It may be followed by a `:' and modifiers as
+ described above.
+
+
+File: mach.info, Node: Copying, Next: Documentation License, Prev: Kernel Debugger, Up: Top
+
+Appendix A GNU GENERAL PUBLIC LICENSE
+*************************************
+
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+A.0.1 Preamble
+--------------
+
+The licenses for most software are designed to take away your freedom
+to share and change it. By contrast, the GNU General Public License is
+intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it in
+new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software,
+and (2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+ 1. This License applies to any program or other work which contains a
+ notice placed by the copyright holder saying it may be distributed
+ under the terms of this General Public License. The "Program",
+ below, refers to any such program or work, and a "work based on
+ the Program" means either the Program or any derivative work under
+ copyright law: that is to say, a work containing the Program or a
+ portion of it, either verbatim or with modifications and/or
+ translated into another language. (Hereinafter, translation is
+ included without limitation in the term "modification".) Each
+ licensee is addressed as "you".
+
+ Activities other than copying, distribution and modification are
+ not covered by this License; they are outside its scope. The act
+ of running the Program is not restricted, and the output from the
+ Program is covered only if its contents constitute a work based on
+ the Program (independent of having been made by running the
+ Program). Whether that is true depends on what the Program does.
+
+ 2. You may copy and distribute verbatim copies of the Program's
+ source code as you receive it, in any medium, provided that you
+ conspicuously and appropriately publish on each copy an appropriate
+ copyright notice and disclaimer of warranty; keep intact all the
+ notices that refer to this License and to the absence of any
+ warranty; and give any other recipients of the Program a copy of
+ this License along with the Program.
+
+ You may charge a fee for the physical act of transferring a copy,
+ and you may at your option offer warranty protection in exchange
+ for a fee.
+
+ 3. You may modify your copy or copies of the Program or any portion
+ of it, thus forming a work based on the Program, and copy and
+ distribute such modifications or work under the terms of Section 1
+ above, provided that you also meet all of these conditions:
+
+ a. You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b. You must cause any work that you distribute or publish, that
+ in whole or in part contains or is derived from the Program
+ or any part thereof, to be licensed as a whole at no charge
+ to all third parties under the terms of this License.
+
+ c. If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display
+ an announcement including an appropriate copyright notice and
+ a notice that there is no warranty (or else, saying that you
+ provide a warranty) and that users may redistribute the
+ program under these conditions, and telling the user how to
+ view a copy of this License. (Exception: if the Program
+ itself is interactive but does not normally print such an
+ announcement, your work based on the Program is not required
+ to print an announcement.)
+
+ These requirements apply to the modified work as a whole. If
+ identifiable sections of that work are not derived from the
+ Program, and can be reasonably considered independent and separate
+ works in themselves, then this License, and its terms, do not
+ apply to those sections when you distribute them as separate
+ works. But when you distribute the same sections as part of a
+ whole which is a work based on the Program, the distribution of
+ the whole must be on the terms of this License, whose permissions
+ for other licensees extend to the entire whole, and thus to each
+ and every part regardless of who wrote it.
+
+ Thus, it is not the intent of this section to claim rights or
+ contest your rights to work written entirely by you; rather, the
+ intent is to exercise the right to control the distribution of
+ derivative or collective works based on the Program.
+
+ In addition, mere aggregation of another work not based on the
+ Program with the Program (or with a work based on the Program) on
+ a volume of a storage or distribution medium does not bring the
+ other work under the scope of this License.
+
+ 4. You may copy and distribute the Program (or a work based on it,
+ under Section 2) in object code or executable form under the terms
+ of Sections 1 and 2 above provided that you also do one of the
+ following:
+
+ a. Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of
+ Sections 1 and 2 above on a medium customarily used for
+ software interchange; or,
+
+ b. Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a
+ medium customarily used for software interchange; or,
+
+ c. Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with
+ such an offer, in accord with Subsection b above.)
+
+ The source code for a work means the preferred form of the work for
+ making modifications to it. For an executable work, complete
+ source code means all the source code for all modules it contains,
+ plus any associated interface definition files, plus the scripts
+ used to control compilation and installation of the executable.
+ However, as a special exception, the source code distributed need
+ not include anything that is normally distributed (in either
+ source or binary form) with the major components (compiler,
+ kernel, and so on) of the operating system on which the executable
+ runs, unless that component itself accompanies the executable.
+
+ If distribution of executable or object code is made by offering
+ access to copy from a designated place, then offering equivalent
+ access to copy the source code from the same place counts as
+ distribution of the source code, even though third parties are not
+ compelled to copy the source along with the object code.
+
+ 5. You may not copy, modify, sublicense, or distribute the Program
+ except as expressly provided under this License. Any attempt
+ otherwise to copy, modify, sublicense or distribute the Program is
+ void, and will automatically terminate your rights under this
+ License. However, parties who have received copies, or rights,
+ from you under this License will not have their licenses
+ terminated so long as such parties remain in full compliance.
+
+ 6. You are not required to accept this License, since you have not
+ signed it. However, nothing else grants you permission to modify
+ or distribute the Program or its derivative works. These actions
+ are prohibited by law if you do not accept this License.
+ Therefore, by modifying or distributing the Program (or any work
+ based on the Program), you indicate your acceptance of this
+ License to do so, and all its terms and conditions for copying,
+ distributing or modifying the Program or works based on it.
+
+ 7. Each time you redistribute the Program (or any work based on the
+ Program), the recipient automatically receives a license from the
+ original licensor to copy, distribute or modify the Program
+ subject to these terms and conditions. You may not impose any
+ further restrictions on the recipients' exercise of the rights
+ granted herein. You are not responsible for enforcing compliance
+ by third parties to this License.
+
+ 8. If, as a consequence of a court judgment or allegation of patent
+ infringement or for any other reason (not limited to patent
+ issues), conditions are imposed on you (whether by court order,
+ agreement or otherwise) that contradict the conditions of this
+ License, they do not excuse you from the conditions of this
+ License. If you cannot distribute so as to satisfy simultaneously
+ your obligations under this License and any other pertinent
+ obligations, then as a consequence you may not distribute the
+ Program at all. For example, if a patent license would not permit
+ royalty-free redistribution of the Program by all those who
+ receive copies directly or indirectly through you, then the only
+ way you could satisfy both it and this License would be to refrain
+ entirely from distribution of the Program.
+
+ If any portion of this section is held invalid or unenforceable
+ under any particular circumstance, the balance of the section is
+ intended to apply and the section as a whole is intended to apply
+ in other circumstances.
+
+ It is not the purpose of this section to induce you to infringe any
+ patents or other property right claims or to contest validity of
+ any such claims; this section has the sole purpose of protecting
+ the integrity of the free software distribution system, which is
+ implemented by public license practices. Many people have made
+ generous contributions to the wide range of software distributed
+ through that system in reliance on consistent application of that
+ system; it is up to the author/donor to decide if he or she is
+ willing to distribute software through any other system and a
+ licensee cannot impose that choice.
+
+ This section is intended to make thoroughly clear what is believed
+ to be a consequence of the rest of this License.
+
+ 9. If the distribution and/or use of the Program is restricted in
+ certain countries either by patents or by copyrighted interfaces,
+ the original copyright holder who places the Program under this
+ License may add an explicit geographical distribution limitation
+ excluding those countries, so that distribution is permitted only
+ in or among countries not thus excluded. In such case, this
+ License incorporates the limitation as if written in the body of
+ this License.
+
+ 10. The Free Software Foundation may publish revised and/or new
+ versions of the General Public License from time to time. Such
+ new versions will be similar in spirit to the present version, but
+ may differ in detail to address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the
+ Program specifies a version number of this License which applies
+ to it and "any later version", you have the option of following
+ the terms and conditions either of that version or of any later
+ version published by the Free Software Foundation. If the Program
+ does not specify a version number of this License, you may choose
+ any version ever published by the Free Software Foundation.
+
+ 11. If you wish to incorporate parts of the Program into other free
+ programs whose distribution conditions are different, write to the
+ author to ask for permission. For software which is copyrighted
+ by the Free Software Foundation, write to the Free Software
+ Foundation; we sometimes make exceptions for this. Our decision
+ will be guided by the two goals of preserving the free status of
+ all derivatives of our free software and of promoting the sharing
+ and reuse of software generally.
+
+ NO WARRANTY
+ 12. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
+ WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
+ LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+ HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
+ WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
+ NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE
+ QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+ PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
+ SERVICING, REPAIR OR CORRECTION.
+
+ 13. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+ WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
+ MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
+ LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
+ INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
+ INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+ DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
+ OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
+ OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+How to Apply These Terms to Your New Programs
+=============================================
+
+If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these
+terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ ONE LINE TO GIVE THE PROGRAM'S NAME AND AN IDEA OF WHAT IT DOES.
+ Copyright (C) 19YY NAME OF AUTHOR
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+
+ Also add information on how to contact you by electronic and paper
+mail.
+
+ If the program is interactive, make it output a short notice like
+this when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19YY NAME OF AUTHOR
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
+ type `show w'. This is free software, and you are welcome
+ to redistribute it under certain conditions; type `show c'
+ for details.
+
+ The hypothetical commands `show w' and `show c' should show the
+appropriate parts of the General Public License. Of course, the
+commands you use may be called something other than `show w' and `show
+c'; they could even be mouse-clicks or menu items--whatever suits your
+program.
+
+ You should also get your employer (if you work as a programmer) or
+your school, if any, to sign a "copyright disclaimer" for the program,
+if necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright
+ interest in the program `Gnomovision'
+ (which makes passes at compilers) written
+ by James Hacker.
+
+ SIGNATURE OF TY COON, 1 April 1989
+ Ty Coon, President of Vice
+
+ This General Public License does not permit incorporating your
+program into proprietary programs. If your program is a subroutine
+library, you may consider it more useful to permit linking proprietary
+applications with the library. If this is what you want to do, use the
+GNU Library General Public License instead of this License.
+
+
+File: mach.info, Node: Documentation License, Next: Concept Index, Prev: Copying, Up: Top
+
+Appendix B Documentation License
+********************************
+
+This manual is copyrighted and licensed under the GNU Free Documentation
+license.
+
+ Parts of this manual are derived from the Mach manual packages
+originally provided by Carnegie Mellon University.
+
+* Menu:
+
+* Free Documentation License:: The GNU Free Documentation License.
+* CMU License:: The CMU license applies to the original Mach
+ kernel and its documentation.
+
+
+File: mach.info, Node: Free Documentation License, Next: CMU License, Up: Documentation License
+
+B.1 GNU Free Documentation License
+==================================
+
+ Version 1.1, March 2000
+
+ Copyright (C) 2000 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ 0. PREAMBLE
+
+ The purpose of this License is to make a manual, textbook, or other
+ written document "free" in the sense of freedom: to assure everyone
+ the effective freedom to copy and redistribute it, with or without
+ modifying it, either commercially or noncommercially. Secondarily,
+ this License preserves for the author and publisher a way to get
+ credit for their work, while not being considered responsible for
+ modifications made by others.
+
+ This License is a kind of "copyleft", which means that derivative
+ works of the document must themselves be free in the same sense.
+ It complements the GNU General Public License, which is a copyleft
+ license designed for free software.
+
+ We have designed this License in order to use it for manuals for
+ free software, because free software needs free documentation: a
+ free program should come with manuals providing the same freedoms
+ that the software does. But this License is not limited to
+ software manuals; it can be used for any textual work, regardless
+ of subject matter or whether it is published as a printed book.
+ We recommend this License principally for works whose purpose is
+ instruction or reference.
+
+ 1. APPLICABILITY AND DEFINITIONS
+
+ This License applies to any manual or other work that contains a
+ notice placed by the copyright holder saying it can be distributed
+ under the terms of this License. The "Document", below, refers to
+ any such manual or work. Any member of the public is a licensee,
+ and is addressed as "you".
+
+ A "Modified Version" of the Document means any work containing the
+ Document or a portion of it, either copied verbatim, or with
+ modifications and/or translated into another language.
+
+ A "Secondary Section" is a named appendix or a front-matter
+ section of the Document that deals exclusively with the
+ relationship of the publishers or authors of the Document to the
+ Document's overall subject (or to related matters) and contains
+ nothing that could fall directly within that overall subject.
+ (For example, if the Document is in part a textbook of
+ mathematics, a Secondary Section may not explain any mathematics.)
+ The relationship could be a matter of historical connection with
+ the subject or with related matters, or of legal, commercial,
+ philosophical, ethical or political position regarding them.
+
+ The "Invariant Sections" are certain Secondary Sections whose
+ titles are designated, as being those of Invariant Sections, in
+ the notice that says that the Document is released under this
+ License.
+
+ The "Cover Texts" are certain short passages of text that are
+ listed, as Front-Cover Texts or Back-Cover Texts, in the notice
+ that says that the Document is released under this License.
+
+ A "Transparent" copy of the Document means a machine-readable copy,
+ represented in a format whose specification is available to the
+ general public, whose contents can be viewed and edited directly
+ and straightforwardly with generic text editors or (for images
+ composed of pixels) generic paint programs or (for drawings) some
+ widely available drawing editor, and that is suitable for input to
+ text formatters or for automatic translation to a variety of
+ formats suitable for input to text formatters. A copy made in an
+ otherwise Transparent file format whose markup has been designed
+ to thwart or discourage subsequent modification by readers is not
+ Transparent. A copy that is not "Transparent" is called "Opaque".
+
+ Examples of suitable formats for Transparent copies include plain
+ ASCII without markup, Texinfo input format, LaTeX input format,
+ SGML or XML using a publicly available DTD, and
+ standard-conforming simple HTML designed for human modification.
+ Opaque formats include PostScript, PDF, proprietary formats that
+ can be read and edited only by proprietary word processors, SGML
+ or XML for which the DTD and/or processing tools are not generally
+ available, and the machine-generated HTML produced by some word
+ processors for output purposes only.
+
+ The "Title Page" means, for a printed book, the title page itself,
+ plus such following pages as are needed to hold, legibly, the
+ material this License requires to appear in the title page. For
+ works in formats which do not have any title page as such, "Title
+ Page" means the text near the most prominent appearance of the
+ work's title, preceding the beginning of the body of the text.
+
+ 2. VERBATIM COPYING
+
+ You may copy and distribute the Document in any medium, either
+ commercially or noncommercially, provided that this License, the
+ copyright notices, and the license notice saying this License
+ applies to the Document are reproduced in all copies, and that you
+ add no other conditions whatsoever to those of this License. You
+ may not use technical measures to obstruct or control the reading
+ or further copying of the copies you make or distribute. However,
+ you may accept compensation in exchange for copies. If you
+ distribute a large enough number of copies you must also follow
+ the conditions in section 3.
+
+ You may also lend copies, under the same conditions stated above,
+ and you may publicly display copies.
+
+ 3. COPYING IN QUANTITY
+
+ If you publish printed copies of the Document numbering more than
+ 100, and the Document's license notice requires Cover Texts, you
+ must enclose the copies in covers that carry, clearly and legibly,
+ all these Cover Texts: Front-Cover Texts on the front cover, and
+ Back-Cover Texts on the back cover. Both covers must also clearly
+ and legibly identify you as the publisher of these copies. The
+ front cover must present the full title with all words of the
+ title equally prominent and visible. You may add other material
+ on the covers in addition. Copying with changes limited to the
+ covers, as long as they preserve the title of the Document and
+ satisfy these conditions, can be treated as verbatim copying in
+ other respects.
+
+ If the required texts for either cover are too voluminous to fit
+ legibly, you should put the first ones listed (as many as fit
+ reasonably) on the actual cover, and continue the rest onto
+ adjacent pages.
+
+ If you publish or distribute Opaque copies of the Document
+ numbering more than 100, you must either include a
+ machine-readable Transparent copy along with each Opaque copy, or
+ state in or with each Opaque copy a publicly-accessible
+ computer-network location containing a complete Transparent copy
+ of the Document, free of added material, which the general
+ network-using public has access to download anonymously at no
+ charge using public-standard network protocols. If you use the
+ latter option, you must take reasonably prudent steps, when you
+ begin distribution of Opaque copies in quantity, to ensure that
+ this Transparent copy will remain thus accessible at the stated
+ location until at least one year after the last time you
+ distribute an Opaque copy (directly or through your agents or
+ retailers) of that edition to the public.
+
+ It is requested, but not required, that you contact the authors of
+ the Document well before redistributing any large number of
+ copies, to give them a chance to provide you with an updated
+ version of the Document.
+
+ 4. MODIFICATIONS
+
+ You may copy and distribute a Modified Version of the Document
+ under the conditions of sections 2 and 3 above, provided that you
+ release the Modified Version under precisely this License, with
+ the Modified Version filling the role of the Document, thus
+ licensing distribution and modification of the Modified Version to
+ whoever possesses a copy of it. In addition, you must do these
+ things in the Modified Version:
+
+ A. Use in the Title Page (and on the covers, if any) a title
+ distinct from that of the Document, and from those of
+ previous versions (which should, if there were any, be listed
+ in the History section of the Document). You may use the
+ same title as a previous version if the original publisher of
+ that version gives permission.
+
+ B. List on the Title Page, as authors, one or more persons or
+ entities responsible for authorship of the modifications in
+ the Modified Version, together with at least five of the
+ principal authors of the Document (all of its principal
+ authors, if it has less than five).
+
+ C. State on the Title page the name of the publisher of the
+ Modified Version, as the publisher.
+
+ D. Preserve all the copyright notices of the Document.
+
+ E. Add an appropriate copyright notice for your modifications
+ adjacent to the other copyright notices.
+
+ F. Include, immediately after the copyright notices, a license
+ notice giving the public permission to use the Modified
+ Version under the terms of this License, in the form shown in
+ the Addendum below.
+
+ G. Preserve in that license notice the full lists of Invariant
+ Sections and required Cover Texts given in the Document's
+ license notice.
+
+ H. Include an unaltered copy of this License.
+
+ I. Preserve the section entitled "History", and its title, and
+ add to it an item stating at least the title, year, new
+ authors, and publisher of the Modified Version as given on
+ the Title Page. If there is no section entitled "History" in
+ the Document, create one stating the title, year, authors,
+ and publisher of the Document as given on its Title Page,
+ then add an item describing the Modified Version as stated in
+ the previous sentence.
+
+ J. Preserve the network location, if any, given in the Document
+ for public access to a Transparent copy of the Document, and
+ likewise the network locations given in the Document for
+ previous versions it was based on. These may be placed in
+ the "History" section. You may omit a network location for a
+ work that was published at least four years before the
+ Document itself, or if the original publisher of the version
+ it refers to gives permission.
+
+ K. In any section entitled "Acknowledgments" or "Dedications",
+ preserve the section's title, and preserve in the section all
+ the substance and tone of each of the contributor
+ acknowledgments and/or dedications given therein.
+
+ L. Preserve all the Invariant Sections of the Document,
+ unaltered in their text and in their titles. Section numbers
+ or the equivalent are not considered part of the section
+ titles.
+
+ M. Delete any section entitled "Endorsements". Such a section
+ may not be included in the Modified Version.
+
+ N. Do not retitle any existing section as "Endorsements" or to
+ conflict in title with any Invariant Section.
+
+ If the Modified Version includes new front-matter sections or
+ appendices that qualify as Secondary Sections and contain no
+ material copied from the Document, you may at your option
+ designate some or all of these sections as invariant. To do this,
+ add their titles to the list of Invariant Sections in the Modified
+ Version's license notice. These titles must be distinct from any
+ other section titles.
+
+ You may add a section entitled "Endorsements", provided it contains
+ nothing but endorsements of your Modified Version by various
+ parties--for example, statements of peer review or that the text
+ has been approved by an organization as the authoritative
+ definition of a standard.
+
+ You may add a passage of up to five words as a Front-Cover Text,
+ and a passage of up to 25 words as a Back-Cover Text, to the end
+ of the list of Cover Texts in the Modified Version. Only one
+ passage of Front-Cover Text and one of Back-Cover Text may be
+ added by (or through arrangements made by) any one entity. If the
+ Document already includes a cover text for the same cover,
+ previously added by you or by arrangement made by the same entity
+ you are acting on behalf of, you may not add another; but you may
+ replace the old one, on explicit permission from the previous
+ publisher that added the old one.
+
+ The author(s) and publisher(s) of the Document do not by this
+ License give permission to use their names for publicity for or to
+ assert or imply endorsement of any Modified Version.
+
+ 5. COMBINING DOCUMENTS
+
+ You may combine the Document with other documents released under
+ this License, under the terms defined in section 4 above for
+ modified versions, provided that you include in the combination
+ all of the Invariant Sections of all of the original documents,
+ unmodified, and list them all as Invariant Sections of your
+ combined work in its license notice.
+
+ The combined work need only contain one copy of this License, and
+ multiple identical Invariant Sections may be replaced with a single
+ copy. If there are multiple Invariant Sections with the same name
+ but different contents, make the title of each such section unique
+ by adding at the end of it, in parentheses, the name of the
+ original author or publisher of that section if known, or else a
+ unique number. Make the same adjustment to the section titles in
+ the list of Invariant Sections in the license notice of the
+ combined work.
+
+ In the combination, you must combine any sections entitled
+ "History" in the various original documents, forming one section
+ entitled "History"; likewise combine any sections entitled
+ "Acknowledgments", and any sections entitled "Dedications". You
+ must delete all sections entitled "Endorsements."
+
+ 6. COLLECTIONS OF DOCUMENTS
+
+ You may make a collection consisting of the Document and other
+ documents released under this License, and replace the individual
+ copies of this License in the various documents with a single copy
+ that is included in the collection, provided that you follow the
+ rules of this License for verbatim copying of each of the
+ documents in all other respects.
+
+ You may extract a single document from such a collection, and
+ distribute it individually under this License, provided you insert
+ a copy of this License into the extracted document, and follow
+ this License in all other respects regarding verbatim copying of
+ that document.
+
+ 7. AGGREGATION WITH INDEPENDENT WORKS
+
+ A compilation of the Document or its derivatives with other
+ separate and independent documents or works, in or on a volume of
+ a storage or distribution medium, does not as a whole count as a
+ Modified Version of the Document, provided no compilation
+ copyright is claimed for the compilation. Such a compilation is
+ called an "aggregate", and this License does not apply to the
+ other self-contained works thus compiled with the Document, on
+ account of their being thus compiled, if they are not themselves
+ derivative works of the Document.
+
+ If the Cover Text requirement of section 3 is applicable to these
+ copies of the Document, then if the Document is less than one
+ quarter of the entire aggregate, the Document's Cover Texts may be
+ placed on covers that surround only the Document within the
+ aggregate. Otherwise they must appear on covers around the whole
+ aggregate.
+
+ 8. TRANSLATION
+
+ Translation is considered a kind of modification, so you may
+ distribute translations of the Document under the terms of section
+ 4. Replacing Invariant Sections with translations requires special
+ permission from their copyright holders, but you may include
+ translations of some or all Invariant Sections in addition to the
+ original versions of these Invariant Sections. You may include a
+ translation of this License provided that you also include the
+ original English version of this License. In case of a
+ disagreement between the translation and the original English
+ version of this License, the original English version will prevail.
+
+ 9. TERMINATION
+
+ You may not copy, modify, sublicense, or distribute the Document
+ except as expressly provided for under this License. Any other
+ attempt to copy, modify, sublicense or distribute the Document is
+ void, and will automatically terminate your rights under this
+ License. However, parties who have received copies, or rights,
+ from you under this License will not have their licenses
+ terminated so long as such parties remain in full compliance.
+
+ 10. FUTURE REVISIONS OF THIS LICENSE
+
+ The Free Software Foundation may publish new, revised versions of
+ the GNU Free Documentation License from time to time. Such new
+ versions will be similar in spirit to the present version, but may
+ differ in detail to address new problems or concerns. See
+ `http://www.gnu.org/copyleft/'.
+
+ Each version of the License is given a distinguishing version
+ number. If the Document specifies that a particular numbered
+ version of this License "or any later version" applies to it, you
+ have the option of following the terms and conditions either of
+ that specified version or of any later version that has been
+ published (not as a draft) by the Free Software Foundation. If
+ the Document does not specify a version number of this License,
+ you may choose any version ever published (not as a draft) by the
+ Free Software Foundation.
+
+B.1.0.1 ADDENDUM: How to use this License for your documents
+............................................................
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and license
+notices just after the title page:
+
+ Copyright (C) YEAR YOUR NAME.
+ Permission is granted to copy, distribute and/or modify this document
+ under the terms of the GNU Free Documentation License, Version 1.1
+ or any later version published by the Free Software Foundation;
+ with the Invariant Sections being LIST THEIR TITLES, with the
+ Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
+ A copy of the license is included in the section entitled ``GNU
+ Free Documentation License''.
+
+ If you have no Invariant Sections, write "with no Invariant Sections"
+instead of saying which ones are invariant. If you have no Front-Cover
+Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being
+LIST"; likewise for Back-Cover Texts.
+
+ If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License, to
+permit their use in free software.
+
+
+File: mach.info, Node: CMU License, Prev: Free Documentation License, Up: Documentation License
+
+B.2 CMU License
+===============
+
+ Mach Operating System
+ Copyright (C) 1991,1990,1989 Carnegie Mellon University
+ All Rights Reserved.
+
+ Permission to use, copy, modify and distribute this software and
+ its documentation is hereby granted, provided that both the
+ copyright notice and this permission notice appear in all copies
+ of the software, derivative works or modified versions, and any
+ portions thereof, and that both notices appear in supporting
+ documentation.
+
+ CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
+ CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
+ ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
+
+ Carnegie Mellon requests users of this software to return to
+
+ Software Distribution Coordinator
+ School of Computer Science
+ Carnegie Mellon University
+ Pittsburgh PA 15213-3890
+
+ or <Software.Distribution@CS.CMU.EDU> any improvements or
+ extensions that they make and grant Carnegie Mellon the rights to
+ redistribute these changes.
+
+
+File: mach.info, Node: Concept Index, Next: Function and Data Index, Prev: Documentation License, Up: Top
+
+Concept Index
+*************
+
+
+* Menu:
+
+* communication between tasks: Major Concepts. (line 6)
+* composing messages: Message Format. (line 6)
+* device port: Device Interface. (line 13)
+* FDL, GNU Free Documentation License: Free Documentation License.
+ (line 6)
+* format of a message: Message Format. (line 6)
+* GPL, GNU General Public License: Copying. (line 6)
+* GRand Unified Bootloader: Bootloader. (line 13)
+* GRUB: Bootloader. (line 13)
+* host control port: Host Ports. (line 34)
+* host interface: Host Interface. (line 6)
+* host name port: Host Ports. (line 6)
+* host ports: Host Ports. (line 6)
+* interprocess communication (IPC): Major Concepts. (line 6)
+* IPC (interprocess communication): Major Concepts. (line 6)
+* IPC space port: Port Manipulation Interface.
+ (line 9)
+* message composition: Message Format. (line 6)
+* message format: Message Format. (line 6)
+* messages: Major Concepts. (line 6)
+* moving port rights: Exchanging Port Rights.
+ (line 6)
+* port representing a device: Device Interface. (line 13)
+* port representing a processor: Processor Interface. (line 6)
+* port representing a processor set name: Processor Set Ports. (line 6)
+* port representing a task: Task Interface. (line 6)
+* port representing a thread: Thread Interface. (line 6)
+* port representing a virtual memory map: Virtual Memory Interface.
+ (line 6)
+* port representing an IPC space: Port Manipulation Interface.
+ (line 9)
+* ports representing a host: Host Ports. (line 6)
+* ports representing a processor set: Processor Set Ports. (line 6)
+* processor port: Processor Interface. (line 6)
+* processor set name port: Processor Set Ports. (line 6)
+* processor set port: Processor Set Ports. (line 13)
+* processor set ports: Processor Set Ports. (line 6)
+* receiving memory: Memory. (line 6)
+* receiving port rights: Exchanging Port Rights.
+ (line 6)
+* remote procedure calls (RPC): Major Concepts. (line 6)
+* RPC (remote procedure calls): Major Concepts. (line 6)
+* sending memory: Memory. (line 6)
+* sending messages: Message Send. (line 6)
+* sending port rights: Exchanging Port Rights.
+ (line 6)
+* serverboot: Modules. (line 6)
+* task port: Task Interface. (line 6)
+* thread port: Thread Interface. (line 6)
+* virtual memory map port: Virtual Memory Interface.
+ (line 6)
+
+
+File: mach.info, Node: Function and Data Index, Prev: Concept Index, Up: Top
+
+Function and Data Index
+***********************
+
+
+* Menu:
+
+* catch_exception_raise: Exceptions. (line 9)
+* device_close: Device Close. (line 7)
+* device_get_status: Device Status. (line 20)
+* device_map: Device Map. (line 9)
+* device_open: Device Open. (line 8)
+* device_open_request: Device Open. (line 36)
+* device_read: Device Read. (line 9)
+* device_read_inband: Device Read. (line 27)
+* device_read_request: Device Read. (line 34)
+* device_read_request_inband: Device Read. (line 51)
+* device_reply_server: Device Reply Server. (line 12)
+* device_set_filter: Device Filter. (line 10)
+* device_set_status: Device Status. (line 9)
+* device_t: Device Interface. (line 14)
+* device_write: Device Write. (line 9)
+* device_write_inband: Device Write. (line 24)
+* device_write_request: Device Write. (line 31)
+* device_write_request_inband: Device Write. (line 49)
+* ds_device_open_reply: Device Open. (line 39)
+* ds_device_read_reply: Device Read. (line 37)
+* ds_device_read_reply_inband: Device Read. (line 54)
+* ds_device_write_reply: Device Write. (line 34)
+* ds_device_write_reply_inband: Device Write. (line 52)
+* evc_wait: Exceptions. (line 18)
+* exception_raise: Exceptions. (line 15)
+* host_adjust_time: Host Time. (line 43)
+* host_basic_info_t: Host Information. (line 75)
+* host_get_boot_info: Host Information. (line 114)
+* host_get_time: Host Time. (line 34)
+* host_info: Host Information. (line 9)
+* host_kernel_version: Host Information. (line 96)
+* host_priv_t: Host Ports. (line 35)
+* host_processor_set_priv: Processor Set Access.
+ (line 25)
+* host_processor_sets: Processor Set Access.
+ (line 9)
+* host_processors: Hosted Processors. (line 9)
+* host_reboot: Host Reboot. (line 8)
+* host_sched_info_t: Host Information. (line 92)
+* host_set_time: Host Time. (line 39)
+* host_t: Host Ports. (line 7)
+* ipc_space_t: Port Manipulation Interface.
+ (line 10)
+* mach_host_self: Host Ports. (line 14)
+* mach_msg: Mach Message Call. (line 13)
+* mach_msg_bits_t: Message Format. (line 21)
+* mach_msg_header_t: Message Format. (line 33)
+* mach_msg_id_t: Message Format. (line 29)
+* mach_msg_size_t: Message Format. (line 25)
+* mach_msg_timeout_t: Mach Message Call. (line 61)
+* mach_msg_type_long_t: Message Format. (line 248)
+* mach_msg_type_name_t: Message Format. (line 128)
+* mach_msg_type_number_t: Message Format. (line 138)
+* MACH_MSG_TYPE_PORT_ANY: Message Format. (line 234)
+* MACH_MSG_TYPE_PORT_ANY_RIGHT: Message Format. (line 244)
+* MACH_MSG_TYPE_PORT_ANY_SEND: Message Format. (line 239)
+* mach_msg_type_size_t: Message Format. (line 133)
+* mach_msg_type_t: Message Format. (line 143)
+* MACH_MSGH_BITS: Message Format. (line 96)
+* MACH_MSGH_BITS_LOCAL: Message Format. (line 108)
+* MACH_MSGH_BITS_OTHER: Message Format. (line 117)
+* MACH_MSGH_BITS_PORTS: Message Format. (line 112)
+* MACH_MSGH_BITS_REMOTE: Message Format. (line 103)
+* mach_port_allocate: Port Creation. (line 8)
+* mach_port_allocate_name: Port Creation. (line 66)
+* mach_port_deallocate: Port Destruction. (line 8)
+* mach_port_destroy: Port Destruction. (line 30)
+* mach_port_extract_right: Ports and other Tasks.
+ (line 59)
+* mach_port_get_receive_status: Receive Rights. (line 57)
+* mach_port_get_refs: Port Rights. (line 9)
+* mach_port_get_set_status: Port Sets. (line 9)
+* mach_port_insert_right: Ports and other Tasks.
+ (line 9)
+* mach_port_mod_refs: Port Rights. (line 42)
+* mach_port_move_member: Port Sets. (line 28)
+* mach_port_mscount_t: Receive Rights. (line 11)
+* mach_port_msgcount_t: Receive Rights. (line 15)
+* mach_port_names: Port Names. (line 9)
+* mach_port_rename: Port Names. (line 77)
+* mach_port_request_notification: Request Notifications.
+ (line 10)
+* mach_port_rights_t: Receive Rights. (line 19)
+* mach_port_seqno_t: Receive Rights. (line 7)
+* mach_port_set_mscount: Receive Rights. (line 73)
+* mach_port_set_qlimit: Receive Rights. (line 90)
+* mach_port_set_seqno: Receive Rights. (line 108)
+* mach_port_status_t: Receive Rights. (line 23)
+* mach_port_t: Message Format. (line 14)
+* mach_port_type: Port Names. (line 35)
+* mach_reply_port: Port Creation. (line 48)
+* mach_task_self: Task Information. (line 7)
+* mach_thread_self: Thread Information. (line 7)
+* mapped_time_value_t: Host Time. (line 51)
+* memory_object_change_attributes: Memory Object Attributes.
+ (line 30)
+* memory_object_change_completed: Memory Object Attributes.
+ (line 63)
+* memory_object_copy: Memory Objects and Data.
+ (line 209)
+* memory_object_create: Default Memory Manager.
+ (line 30)
+* memory_object_data_error: Memory Objects and Data.
+ (line 157)
+* memory_object_data_initialize: Default Memory Manager.
+ (line 73)
+* memory_object_data_provided: Memory Objects and Data.
+ (line 289)
+* memory_object_data_request: Memory Objects and Data.
+ (line 49)
+* memory_object_data_return: Memory Objects and Data.
+ (line 11)
+* memory_object_data_supply: Memory Objects and Data.
+ (line 84)
+* memory_object_data_unavailable: Memory Objects and Data.
+ (line 177)
+* memory_object_data_unlock: Memory Object Locking.
+ (line 85)
+* memory_object_data_write: Memory Objects and Data.
+ (line 260)
+* memory_object_default_server: Memory Object Server.
+ (line 10)
+* memory_object_destroy: Memory Object Termination.
+ (line 37)
+* memory_object_get_attributes: Memory Object Attributes.
+ (line 10)
+* memory_object_init: Memory Object Creation.
+ (line 11)
+* memory_object_lock_completed: Memory Object Locking.
+ (line 59)
+* memory_object_lock_request: Memory Object Locking.
+ (line 11)
+* memory_object_ready: Memory Object Creation.
+ (line 52)
+* memory_object_server: Memory Object Server.
+ (line 8)
+* memory_object_set_attributes: Memory Object Attributes.
+ (line 82)
+* memory_object_supply_completed: Memory Objects and Data.
+ (line 127)
+* memory_object_terminate: Memory Object Termination.
+ (line 10)
+* processor_assign: Processors and Sets. (line 8)
+* processor_basic_info_t: Processor Info. (line 67)
+* processor_control: Processor Control. (line 10)
+* processor_exit: Processor Control. (line 8)
+* processor_get_assignment: Processors and Sets. (line 32)
+* processor_info: Processor Info. (line 9)
+* processor_set_basic_info_t: Processor Set Info. (line 75)
+* processor_set_create: Processor Set Creation.
+ (line 8)
+* processor_set_default: Processor Set Access.
+ (line 36)
+* processor_set_destroy: Processor Set Destruction.
+ (line 8)
+* processor_set_info: Processor Set Info. (line 10)
+* processor_set_max_priority: Processor Set Priority.
+ (line 9)
+* processor_set_name_t: Processor Set Ports. (line 7)
+* processor_set_policy_disable: Processor Set Policy.
+ (line 11)
+* processor_set_policy_enable: Processor Set Policy.
+ (line 8)
+* processor_set_sched_info_t: Processor Set Info. (line 93)
+* processor_set_t: Processor Set Ports. (line 14)
+* processor_set_tasks: Tasks and Threads on Sets.
+ (line 9)
+* processor_set_threads: Tasks and Threads on Sets.
+ (line 23)
+* processor_start: Processor Control. (line 7)
+* processor_t: Processor Interface. (line 7)
+* sampled_pc_flavor_t: Profiling. (line 67)
+* sampled_pc_t: Profiling. (line 52)
+* seqnos_memory_object_change_completed: Memory Object Attributes.
+ (line 67)
+* seqnos_memory_object_copy: Memory Objects and Data.
+ (line 214)
+* seqnos_memory_object_create: Default Memory Manager.
+ (line 35)
+* seqnos_memory_object_data_initialize: Default Memory Manager.
+ (line 77)
+* seqnos_memory_object_data_request: Memory Objects and Data.
+ (line 53)
+* seqnos_memory_object_data_return: Memory Objects and Data.
+ (line 16)
+* seqnos_memory_object_data_unlock: Memory Object Locking.
+ (line 89)
+* seqnos_memory_object_data_write: Memory Objects and Data.
+ (line 264)
+* seqnos_memory_object_default_server: Memory Object Server.
+ (line 14)
+* seqnos_memory_object_init: Memory Object Creation.
+ (line 16)
+* seqnos_memory_object_lock_completed: Memory Object Locking.
+ (line 63)
+* seqnos_memory_object_server: Memory Object Server.
+ (line 12)
+* seqnos_memory_object_supply_completed: Memory Objects and Data.
+ (line 132)
+* seqnos_memory_object_terminate: Memory Object Termination.
+ (line 14)
+* struct host_basic_info: Host Information. (line 48)
+* struct host_sched_info: Host Information. (line 78)
+* struct processor_basic_info: Processor Info. (line 44)
+* struct processor_set_basic_info: Processor Set Info. (line 51)
+* struct processor_set_sched_info: Processor Set Info. (line 78)
+* struct task_basic_info: Task Information. (line 82)
+* struct task_events_info: Task Information. (line 114)
+* struct task_thread_times_info: Task Information. (line 145)
+* struct thread_basic_info: Thread Information. (line 66)
+* struct thread_sched_info: Thread Information. (line 128)
+* swtch: Hand-Off Scheduling. (line 81)
+* swtch_pri: Hand-Off Scheduling. (line 93)
+* task_assign: Tasks and Threads on Sets.
+ (line 36)
+* task_assign_default: Tasks and Threads on Sets.
+ (line 49)
+* task_basic_info_t: Task Information. (line 111)
+* task_create: Task Creation. (line 8)
+* task_disable_pc_sampling: Profiling. (line 22)
+* task_enable_pc_sampling: Profiling. (line 8)
+* task_events_info_t: Task Information. (line 142)
+* task_get_assignment: Tasks and Threads on Sets.
+ (line 60)
+* task_get_bootstrap_port: Task Special Ports. (line 42)
+* task_get_emulation_vector: Syscall Emulation. (line 9)
+* task_get_exception_port: Task Special Ports. (line 36)
+* task_get_kernel_port: Task Special Ports. (line 30)
+* task_get_sampled_pcs: Profiling. (line 36)
+* task_get_special_port: Task Special Ports. (line 8)
+* task_info: Task Information. (line 44)
+* task_priority: Task Execution. (line 29)
+* task_ras_control: Task Execution. (line 47)
+* task_resume: Task Execution. (line 19)
+* task_set_bootstrap_port: Task Special Ports. (line 78)
+* task_set_emulation: Syscall Emulation. (line 22)
+* task_set_emulation_vector: Syscall Emulation. (line 15)
+* task_set_exception_port: Task Special Ports. (line 72)
+* task_set_kernel_port: Task Special Ports. (line 66)
+* task_set_special_port: Task Special Ports. (line 48)
+* task_suspend: Task Execution. (line 7)
+* task_t: Task Interface. (line 7)
+* task_terminate: Task Termination. (line 7)
+* task_thread_times_info_t: Task Information. (line 159)
+* task_threads: Task Information. (line 33)
+* thread_abort: Thread Execution. (line 38)
+* thread_assign: Tasks and Threads on Sets.
+ (line 72)
+* thread_assign_default: Tasks and Threads on Sets.
+ (line 85)
+* thread_basic_info_t: Thread Information. (line 125)
+* thread_create: Thread Creation. (line 8)
+* thread_depress_abort: Hand-Off Scheduling. (line 74)
+* thread_disable_pc_sampling: Profiling. (line 24)
+* thread_enable_pc_sampling: Profiling. (line 10)
+* thread_get_assignment: Tasks and Threads on Sets.
+ (line 96)
+* thread_get_exception_port: Thread Special Ports.
+ (line 27)
+* thread_get_kernel_port: Thread Special Ports.
+ (line 21)
+* thread_get_sampled_pcs: Profiling. (line 39)
+* thread_get_special_port: Thread Special Ports.
+ (line 8)
+* thread_get_state: Thread Execution. (line 102)
+* thread_info: Thread Information. (line 33)
+* thread_max_priority: Thread Priority. (line 38)
+* thread_policy: Scheduling Policy. (line 8)
+* thread_priority: Thread Priority. (line 20)
+* thread_resume: Thread Execution. (line 29)
+* thread_sched_info_t: Thread Information. (line 159)
+* thread_set_exception_port: Thread Special Ports.
+ (line 52)
+* thread_set_kernel_port: Thread Special Ports.
+ (line 46)
+* thread_set_special_port: Thread Special Ports.
+ (line 33)
+* thread_set_state: Thread Execution. (line 126)
+* thread_suspend: Thread Execution. (line 7)
+* thread_switch: Hand-Off Scheduling. (line 8)
+* thread_t: Thread Interface. (line 7)
+* thread_terminate: Thread Termination. (line 7)
+* thread_wire: Thread Settings. (line 8)
+* time_value_add: Host Time. (line 25)
+* time_value_add_usec: Host Time. (line 21)
+* time_value_t: Host Time. (line 7)
+* vm_allocate: Memory Allocation. (line 8)
+* vm_copy: Data Transfer. (line 53)
+* vm_deallocate: Memory Deallocation. (line 8)
+* vm_inherit: Memory Attributes. (line 70)
+* vm_machine_attribute: Memory Attributes. (line 134)
+* vm_map: Mapping Memory Objects.
+ (line 11)
+* vm_protect: Memory Attributes. (line 36)
+* vm_read: Data Transfer. (line 9)
+* vm_region: Memory Attributes. (line 11)
+* vm_set_default_memory_manager: Default Memory Manager.
+ (line 8)
+* vm_statistics: Memory Statistics. (line 52)
+* vm_statistics_data_t: Memory Statistics. (line 7)
+* vm_task_t: Virtual Memory Interface.
+ (line 7)
+* vm_wire: Memory Attributes. (line 101)
+* vm_write: Data Transfer. (line 34)
+
+
diff --git a/doc/stamp-vti b/doc/stamp-vti
new file mode 100644
index 0000000..cab3d80
--- /dev/null
+++ b/doc/stamp-vti
@@ -0,0 +1,4 @@
+@set UPDATED 7 October 2006
+@set UPDATED-MONTH October 2006
+@set EDITION 1.3.99
+@set VERSION 1.3.99