diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 211 |
1 files changed, 55 insertions, 156 deletions
diff --git a/Makefile.in b/Makefile.in index 230c968..0d61535 100644 --- a/Makefile.in +++ b/Makefile.in @@ -6,7 +6,7 @@ # notice and this permission notice appear in all copies of the # software, derivative works or modified versions, and any portions # thereof, and that both notices appear in supporting documentation. -# +# # THE FREE SOFTWARE FOUNDATION ALLOWS FREE USE OF THIS SOFTWARE IN ITS # "AS IS" CONDITION. THE FREE SOFTWARE FOUNDATION DISCLAIMS ANY # LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE @@ -20,7 +20,6 @@ srcdir=@srcdir@ systype=@systype@ prefix=@prefix@ -installed-clib=@installed_clib@ exec_prefix=$(prefix) bootdir=$(exec_prefix)/boot @@ -30,12 +29,6 @@ bindir=$(exec_prefix)/bin sysdep = $(srcdir)/$(systype) -cross_compiling=@cross_compiling@ -cross_linkable=@cross_linkable@ -ifeq ($(cross_linkable),yes) - cross-migcom = cross-migcom -endif - # Detect if the user wants KDB ifeq ($(findstring -DMACH_KDB,@DEFS@),-DMACH_KDB) enable_kdb=yes @@ -44,23 +37,17 @@ enable_kdb=no endif # Programs found by configure. -AWK=@AWK@ -INSTALL=@INSTALL@ -CC=@CC@ -BUILD_CC=@BUILD_CC@ -LEX=@LEX@ -YACC=@YACC@ +AWK = @AWK@ +INSTALL = @INSTALL@ +CC = @CC@ +LD = @LD@ +NM = @NM@ +MIG = @MIG@ -LEXLIB=@LEXLIB@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM=$(INSTALL) -INSTALL_DATA=$(INSTALL) -m 644 - -CFLAGS=@CFLAGS@ - -# We build these locally -MIG=./local-mig -MIGCOM=./migcom +CFLAGS = @CFLAGS@ all: @@ -76,7 +63,7 @@ topfiles = ChangeLog ChangeLog.0 ChangeLog.00 Drivers.macros Makefile.in \ README INSTALL config.guess config.sub configure configure.in \ gensym.awk install-sh version.c NEWS aclocal.m4 COPYING -# All the source in each directory. +# All the source in each directory. # Old crud from a previous configure scheme bogus-files = bootstrap_symbols.h fast_tas.h hw_footprint.h net_atm.h \ @@ -132,7 +119,7 @@ ipc-cfiles = $(addprefix ipc_,$(ipc-names)) \ mach_msg.c mach_port.c mach_rpc.c mach_debug.c fipc.c ipc-names = entry.c hash.c init.c kmsg.c marequest.c mqueue.c \ notify.c object.c port.c pset.c right.c space.c splay.c \ - table.c target.c thread.c + table.c target.c thread.c ipc-files = $(ipc-cfiles) mach_port.srv fipc.h port.h mach_msg.h \ $(patsubst %,ipc_%.h, \ entry hash init kmsg kmsg_queue machdep marequest mqueue notify \ @@ -162,7 +149,7 @@ util-files = $(util-cfiles) config.h cpu.h cpu_subs.h cpus.h debug.h \ phys_mem.h ref_count.h # Virtual memory implementation -vm-cfiles = $(addprefix vm_,$(vm-names)) memory_object.c +vm-cfiles = $(addprefix vm_,$(vm-names)) memory_object.c vm-names = debug.c external.c fault.c init.c kern.c map.c \ object.c pageout.c resident.c user.c vm-files = $(vm-cfiles) memory_object_default.cli memory_object_user.cli \ @@ -223,7 +210,7 @@ mach-debug-headers:= $(addprefix mach_debug/, hash_info.h ipc_info.h \ installed-headers:= $(device-headers) $(mach-headers) $(mach-exec-headers) -# Other headers for the distribution. We don't install these, because the +# Other headers for the distribution. We don't install these, because the # GNU C library has correct versions for users to use. other-sys-headers := types.h time.h reboot.h ioctl.h other-mach-headers := mig_support.h mach_traps.h error.h @@ -237,22 +224,28 @@ other-headers := alloca.h # for sanity. objfiles += clib-routines.o -clib-routines := memcpy memset bcopy bzero htonl htons ntohl ntohs +clib-routines := memcpy memset bcopy bzero htonl htons ntohl ntohs ifeq ($(enable_kdb),yes) clib-routines += strstr endif -clib-routines.o: $(installed-clib) - $(LD) -o clib-routines.o -r $(addprefix -u ,$(clib-routines)) $(installed-clib) +Wl-u = -Wl,-u, +clib-routines.o: Makefile + $(CC) -o $@ -r -nostartfiles -nostdlib -static -x c /dev/null \ + $(addprefix $(Wl-u),$(clib-routines)) -lc -# This rule checks clib-routines and makes sure it doesn't have any +# This rule checks clib-routines and makes sure it doesn't have any # extra symbols. kernel: check-clib-routines check-clib-routines: clib-routines.o - nm -g $< | awk '$(foreach sym,$(clib-routines),$$3 == "$(sym)" ||) 0 { match_cnt++ } \ - $$2 == "W" { weak_cnt++ } \ - { total_cnt++ } \ - END { exit total_cnt - (match_cnt + weak_cnt) } ' && touch check-clib-routines + $(NM) -g $< | \ + awk '$(foreach sym,$(clib-routines),\ + $$3 == "$(sym)" || $$3 == "__$(sym)" ||) 0 \ + { match_cnt++; total_cnt++; next } \ + $$2 == "W" { weak_cnt++ } \ + { total_cnt++ } \ + END { exit total_cnt - (match_cnt + weak_cnt) }' + touch check-clib-routines # Empty dependency file @@ -274,6 +267,17 @@ objfiles += device_server.o device_pager_server.o mach_port_server.o \ vpath %.cli $(srcdir)/vm $(srcdir)/device vpath %.srv $(srcdir)/device $(srcdir)/ipc $(srcdir)/kern + +# We need this symlink in place before we start compiling, +# so <mach/machine/foo.h> headers can be found. +before-compile = mach/machine +mach/machine: mach_machine + test -d $(@D) || mkdir $(@D) + rm -f $@ + ln -s ../mach_machine mach/machine +mach_machine: config.status + rm -f $@ + ln -s $(srcdir)/$(systype)/include/mach/$(systype) mach_machine @@ -288,18 +292,18 @@ INCLUDES += -I. -I$(srcdir) -I$(srcdir)/include \ include $(sysdep)/Makefrag -CPPFLAGS += -nostdinc $(DEFINES) $(INCLUDES) +CPPFLAGS += -nostdinc $(DEFINES) $(INCLUDES) MIGFLAGS += $(CPPFLAGS) # Standard targets -all: kernel $(cross-migcom) cross-mig +all: kernel clean: mv device-drivers.h FOO - rm -f *.o *.d kernel cross-migcom cross-mig migcom local-mig + rm -f *.o *.d kernel rm -f *.symc *.symc.o *_user.c *_server.c *.h rm -f *.migs_d *.migsh_d *.migu_d *.miguh_d mv FOO device-drivers.h @@ -308,8 +312,6 @@ distclean: clean rm -f config.status Makefile driverlist mostlyclean: distclean - rm -f $(srcdir)/mig/lexxer.c - rm -f $(srcdir)/mig/parser.c $(srcdir)/mig/parser.h maintainer-clean: mostlyclean rm -f $(srcdir)/configure $(all-archs-configures) @@ -329,13 +331,11 @@ kernel: $(objfiles) # # Installation -# +# installed-headers-names = $(addprefix $(includedir)/,$(installed-headers)) installed-sysdep-headers-names = $(addprefix $(includedir)/,$($(systype)-installed-headers)) -install: mkinstalldirs kernel $(installed-headers-names) $(installed-sysdep-headers-names) cross-mig $(cross-migcom) +install: mkinstalldirs kernel $(installed-headers-names) $(installed-sysdep-headers-names) $(INSTALL_PROGRAM) kernel $(bootdir)/gnumach - $(INSTALL_PROGRAM) cross-mig $(bindir)/mig - test -z "$(cross-migcom)" || $(INSTALL_PROGRAM) cross-migcom $(libexecdir)/migcom ln -sf $(systype) $(includedir)/mach/machine $(installed-headers-names): $(includedir)/%: $(srcdir)/include/% @@ -358,7 +358,7 @@ dist: rm -rf gnumach-$(version) mkdir gnumach-$(version) # Directories - mkdir gnumach-$(version)/{bogus,chips,ddb,device,ipc,kern,mig,scsi,util,vm,include} + mkdir gnumach-$(version)/{bogus,chips,ddb,device,ipc,kern,scsi,util,vm,include} mkdir gnumach-$(version)/include/{mach,device,mach_debug,sys} mkdir gnumach-$(version)/include/mach/exec for dir in `cat $(all-archs-subdirs)`; do \ @@ -372,7 +372,6 @@ dist: ln $(addprefix $(srcdir)/device/,$(device-files)) gnumach-$(version)/device ln $(addprefix $(srcdir)/ipc/,$(ipc-files)) gnumach-$(version)/ipc ln $(addprefix $(srcdir)/kern/,$(kern-files)) gnumach-$(version)/kern - ln $(addprefix $(srcdir)/mig/,$(mig-files)) gnumach-$(version)/mig ln $(addprefix $(srcdir)/scsi/,$(scsi-files)) gnumach-$(version)/scsi ln $(addprefix $(srcdir)/util/,$(util-files)) gnumach-$(version)/util ln $(addprefix $(srcdir)/vm/,$(vm-files)) gnumach-$(version)/vm @@ -414,7 +413,7 @@ vpath configure $(srcdir) # # How to do some things -# +# # Building foo.h from foo.sym: %.symc: %.sym @@ -426,11 +425,11 @@ vpath configure $(srcdir) sed -e 's/^[*]/#define/' -e 's/mAgIc[^-0-9]*//' >$@ # Building from foo.cli -%.h %_user.c: %.cli $(MIG) $(MIGCOM) +%.h %_user.c: %.cli $(MIG) $(MIGFLAGS) -header $*.h -user $*_user.c -server /dev/null $< # Building from foo.srv -%_interface.h %_server.c: %.srv $(MIG) $(MIGCOM) +%_interface.h %_server.c: %.srv $(MIG) $(MIGFLAGS) -header $*_interface.h -server $*_server.c -user /dev/null $< # @@ -442,16 +441,16 @@ ifneq ($(no_deps),t) # For each file generated by MiG we need a .d file. servers = $(filter %_server.o,$(objfiles)) -include $(subst _server.o,.migs_d,$(servers)) /dev/null -include $(subst _server.o,.migsh_d,$(servers)) /dev/null +-include $(subst _server.o,.migs_d,$(servers)) /dev/null +-include $(subst _server.o,.migsh_d,$(servers)) /dev/null # vm_user.o fits the pattern, but is not actually a MiG-related file. users = $(filter-out vm_user.o,$(filter %_user.o,$(objfiles))) -include $(subst _user.o,.migu_d,$(users)) /dev/null -include $(subst _user.o,.miguh_d,$(users)) /dev/null +-include $(subst _user.o,.migu_d,$(users)) /dev/null +-include $(subst _user.o,.miguh_d,$(users)) /dev/null # For each .o file we need a .d file. -include $(subst .o,.d,$(filter %.o,$(objfiles))) /dev/null +-include $(subst .o,.d,$(filter %.o,$(objfiles))) /dev/null endif @@ -478,8 +477,8 @@ set -e; $(CC) $(CFLAGS) $(CPPFLAGS) -M -MG $< | \ mv -f $@.new $@ endef -%.d: %.c; $(make-deps) -%.d: %.S; $(make-deps) +%.d: %.c $(before-compile); $(make-deps) +%.d: %.S $(before-compile); $(make-deps) # .s files don't go through the preprocessor, so we do this # This rule must come *after* the genuine ones above, so that @@ -487,103 +486,3 @@ endef # list. %.d: %.s echo '$*.o: $<' > $@ - - -# How to build MiG: - -mig-objfiles = error.o global.o header.o lexxer.o migcom.o parser.o routine.o \ - server.o statement.o string.o type.o user.o utils.o -mig-csrcfiles = $(subst .o,.c,$(mig-objfiles)) -mig-othersrc = alloc.h boolean.h error.h global.h lexxer.h message.h \ - mig_string.h routine.h statement.h type.h utils.h write.h \ - lexxer.l parser.y mig.sh parser.h cpu.sym - -cross-lexxer.o lexxer.o: cpu.h - -mig-files = $(mig-csrcfiles) $(mig-othersrc) ChangeLog - -vpath cpu.sym $(srcdir)/mig - -ifeq ($(cross_linkable),yes) -# Don't use $(CPPFLAGS) here; MiG needs none of the Mach headers except -# what happens automagically to build cpu.h. - -# Here's how to build MiG for the target. -cross-mig-objfiles = $(addprefix cross-,$(mig-objfiles)) - -$(cross-mig-objfiles): cross-%.o: $(srcdir)/mig/%.c - $(CC) -c $(CFLAGS) -I. -I$(srcdir)/mig -o $@ $< - -./cross-migcom: $(cross-mig-objfiles) - $(CC) $(CFLAGS) $(cross-mig-objfiles) $(LEXLIB) -o $@ - -# Dependencies for these .o files -ifneq ($(no_deps),t) -include $(subst .o,.d,$(cross-mig-objfiles)) /dev/null -endif - -$(subst .o,.d,$(cross-mig-objfiles)): cross-%.d: $(srcdir)/mig/%.c - set -e; $(CC) $(CFLAGS) -M -MG -I. -I$(srcdir)/mig $< | \ - sed > $@.new -e 's/$*\.o:/cross-$*.o $@:/' - mv -f $@.new $@ -endif - -ifeq ($(cross_compiling),yes) -# When cross compiling, we build two migcoms; one for our use and one to -# install. Otherwise, we just build the one. - -$(mig-objfiles): %.o: $(srcdir)/mig/%.c - $(BUILD_CC) -c $(BUILD_CFLAGS) -I. -I$(srcdir)/mig -o $@ $< - -./migcom: $(mig-objfiles) - $(BUILD_CC) $(BUILD_CFLAGS) $(mig-objfiles) $(LEXLIB) -o $@ - -ifneq ($(no_deps),t) -include $(subst .o,.d,$(mig-objfiles)) -endif - -$(subst .o,.d,$(mig-objfiles)): %.d: $(srcdir)/mig/%.c - set -e; $(BUILD_CC) $(BUILD_CFLAGS) -M -MG -I. -I$(srcdir)/mig $< | \ - sed > $@.new -e 's/$*\.o:/$*.o $@:/' - mv -f $@.new $@ - -else -./migcom: ./cross-migcom - rm -f $@ - ln $< $@ -endif - -$(srcdir)/mig/lexxer.c: $(srcdir)/mig/lexxer.l - $(LEX) $(LFLAGS) $< - mv lex.yy.c $*.c - -$(srcdir)/mig/parser.c $(srcdir)/mig/parser.h: $(srcdir)/mig/parser.y - $(YACC) $(YFLAGS) -d $< - mv y.tab.c $(srcdir)/mig/parser.c - mv y.tab.h $(srcdir)/mig/parser.h - -# Version of mig script that looks for the right local tools -ifeq ($(cross_compiling),yes) -./local-mig: $(srcdir)/mig/mig.sh Makefile - sed -e 's,@MIGDIR@,.,g' \ - -e 's,@CPP@,${BUILD_CC} -x c-header -E,g' \ - $< >$@.tmp && chmod +x $@.tmp && mv -f $@.tmp $@ -else -./local-mig: $(srcdir)/mig/mig.sh Makefile - sed -e 's,@MIGDIR@,.,g' \ - -e 's,@CPP@,${CC} -x c-header -E,g' \ - $< >$@.tmp && chmod +x $@.tmp && mv -f $@.tmp $@ -endif - -# Version of MiG to install -cross-mig: $(srcdir)/mig/mig.sh Makefile - sed -e 's,@MIGDIR@,$(libexecdir),g' \ - -e 's,@CPP@,${CC} -x c-header -E,g' \ - $< >$@.tmp && chmod +x $@.tmp && mv -f $@.tmp $@ - - -# The first time through, Make will try and build MiG to get -# dependencies, before it knows about the automatically generated -# files that MiG needs. So tell it about that file here. -cross-lexxer.o lexxer.o: cpu.h - |