diff options
| -rw-r--r-- | i386/README-Drivers | 184 |
1 files changed, 130 insertions, 54 deletions
diff --git a/i386/README-Drivers b/i386/README-Drivers index bb2f521..7089b31 100644 --- a/i386/README-Drivers +++ b/i386/README-Drivers @@ -1,6 +1,3 @@ -Adaptec 1740 -Patch probe routine to add outb to put card in enhanced mode. - -*- text -*- ** Turning on or off device drivers @@ -32,16 +29,19 @@ are believed to work. *** All source file names are relative to .../gnumach/i386/i386at for Mach -drivers, and .../gnumach/i386/i386at/gpl/linux for Linux drivers. +drivers, and .../gnumach/linux/src/drivers for Linux drivers. *** Serial devices and similar equivalents -PC com ports - --enable-com com.c +PC com ports (always enabled) 0x3f8,2f8,3e8 com%d +Parallel port + --enable-lpr lpr.c + lpr%d + System Console (always enabled) (indirect name for kd or first com line) console @@ -83,20 +83,22 @@ IDE disks *** SCSI disks Disks all show up as `sd%d'. CD Roms all show up as `cd%d'. Tapes and generic are not currently supported. -AdvansSys +AdvanSys --enable-advansys scsi/advansys.c -BusLogic MultiMaster - --enable-buslogic scsi/BusLogic.c +BusLogic + --enable-buslogic scsi/{BusLogic,FlashPoint}.c + --disable-flashpoint (if you want to omit FlashPoint support) UltraStor 14F/34F --enable-u1434f scsi/u14-34f.c -UlstraStor 14F, 24F, and 34F +UlstraStor --enable-ultrastor scsi/ultrastor.c -Adaptec AHA-152x +Adaptec AHA-152x/2825 --enable-aha152x scsi/aha152x.c + --enable-aha2825 Adaptec AHA-1542 --enable-aha1542 scsi/aha1540.c @@ -107,55 +109,84 @@ Adaptec AHA-1740 Adaptec AIC7xxx --enable-aic7xxx scsi/aic7xxx.c -Future Domain TMC-16x0 +Future Domain 16xx --enable-futuredomain scsi/fdomain.c Always IN 2000 --enable-in2000 scsi/in2000.c -Generic NCR5380 +Generic NCR5380/53c400 --enable-ncr5380 scsi/g_NCR5380.c + --enable-ncr53c400 -NCR53c406 chip +NCR53c406a chip --enable-ncr53c406a scsi/NCR53c406a.c -Qlogic FAS408 - --enable-qlogic scsi/qlogic.c - -Pro Audio Spectrum/Studio 16 - --enable-pas16 scsi/pas16.c +PAS16 scsi/pas16.c + --enable-pas16 -Seagate ST01, ST02, Future Domain TMC-885, TMC-950 +Seagate ST02, Future Domain TMC-8xx --enable-seagate scsi/seagate.c -Trantor T128, T128F, T228 +Trantor T128/T128F/T228 --enable-t128 scsi/t128.c + --enable-t128f + --enable-t228 -NCR 53C7xx - --enable-ncr53c7xx scsi/53c7,8xx.c +NCR 53C7,8xx + --enable-ncr53c7xx scsi/53c78xx.c -EATA DMA +EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix) --enable-eatadma scsi/eata_dma.c -EATA PIO +EATA-PIO (old DPT PM2001, PM2012A) --enable-eatapio scsi/eata_pio.c WD 7000 --enable-wd7000 scsi/wd7000.c -EATA +EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) --enable-eata scsi/eata.c -AM52/79C974 +AM53/79C974 --enable-am53c974 scsi/AM53C974.c + --enable-am79c974 + +DTC3180/3280 + --enable-dtc3280 scsi/dtc.c + --enable-dtc3180 + +NCR53C8XX + --enable-ncr53c8xx scsi/ncr53c8xx.c + +Tekram DC-390W/U/F + --enable-dc390w scsi/tmsscsiw.c + --enable-dc390u + --enable-dc390f +Tekram DC-390(T) + --enable-dc390t scsi/tmsscsim.c + --enable-dc390 + +IOMEGA Parallel Port ZIP drive + --enable-ppa scsi/ppa.c + +Qlogic FAS + --enable-qlogicfas scsi/qlogicfas.c + +Qlogic ISP + --enable-qlogicisp scsi/qlogicisp.c + +GDT SCSI Disk Array Controller + --enable-gdth scsi/gdth.c *** Ethernet controllers These all show up as `eth%d' except the atp device. -NE2000 +NE2000/NE1000 ISA --enable-ne2000 net/ne.c 8390.c + --enable-ne1000 0x300,280,320,340,360 3Com 503 (Etherlink II) @@ -163,15 +194,16 @@ NE2000 --enable-el2 0x300,310,330,350,250,280,2a0,2e0 -3Com 509 (Etherlink III) +3Com 509/579 (Etherlink III) --enable-3c509 net/3c509.c + --enable-3c579 --enable-el3 -Western Digital 8003E +WD80*3 --enable-wd80x3 net/wd.c, net/8390.c 0x300,280,380,240 -3COM Etherlink 3C501 +3COM 501 --enable-3c501 net/3c501.c --enable-el1 0x280, 300 @@ -180,24 +212,28 @@ SMC Ultra --enable-ul net/smc-ultra.c net/8390.c 0x200,220,240,280,300,340,380 -Hewlett Packard PC LAN 27??? plus ethercards. - --enable-hplanplus net/hp-plus.c +SMC Ultra32 + --enable-ul32 net/smc-ultra32.c net/8390.c + +HP PCLAN+ (27247B and 27252A) + --enable-hplanplus net/hp-plus.c net/8390.c 0x200,240,280,2c0,300,320,340 -Hewlett Packard PC Lan +HP PCLAN (27245 and other 27xxx series) --enable-hplan net/hp.c, net/8390.c 0x300,320,340,280,2c0,200,240 -3Com 3c590/3c595 Vortex +3Com 590/900 series (592/595/597/900/905) "Vortex/Boomerang" --enable-3c59x + --enable-3c90x --enable-vortex net/3c59x.c -Seeq 8005 +Seeq8005 --enable-seeq8005 net/seeq8005.c 0x300,320,340,360 -Hewlett Packard HP10/100 cards net/hp100.c - --enable-hp100 +HP 10/100VG PCLAN (ISA, EISA, PCI) + --enable-hp100 net/hp100.c --enable-hpj2577 --enable-hpj2573 --enable-hp27248b @@ -206,33 +242,35 @@ Hewlett Packard HP10/100 cards net/hp100.c Ansel Communications EISA 3200 --enable-ac3200 net/ac3200.c, net/8390.c -Cabletron E2100 series +Cabletron E21xx --enable-e2100 net/e2100.c, net/8390.c 0x300,280,380,220 -Allied Telesis AT1700 +AT1700 (Fujitsu 86965) --enable-at1700 net/at1700.c 0x260,280,2a0,240,340,320,380,300 -ECL EtherTeam 16i and 32 EISA +ICL EtherTeam 16i/32 --enable-eth16i net/eth16i.c --enable-eth32 0x260,280,2a0,240,340,320,380,300 (16i) -Zenith Z-Note (and some IBM thinkpads) +Zenith Z-Note --enable-znet net/znet.c --enable-znote -Intel EtherExpress +EtherExpress 16 --enable-eexpress net/eexpress.c 0x300,270,320,340 -Intel EtherExpress Pro/10 +EtherExpressPro --enable-eexpresspro net/eepro.c 0x200,240,280,2c0,300,320,340,360 -Digital DEPCA and EtherWORKS - (DEPCA, DE10[01], DE20[012] Turbo, DE210, DE422) +Intel EtherExpressPro PCI 10+/100B/100+ + --enable-eexpresspro100 net/eepro100.c + +DEPCA, DE10x, DE200, DE201, DE202, DE210, DE422 --enable-depca net/depca.c --enable-de100 --enable-de101 @@ -242,33 +280,33 @@ Digital DEPCA and EtherWORKS --enable-de210 --enable-de422 -EtherWORKS 3 Driver - (DE20[345]) +EtherWORKS 3 (DE203, DE204, DE205) --enable-ewrk3 net/ewrk3.c --enable-de203 --enable-de204 --enable-de205 -Digital DE 400 series cards: DE425, DE43[45], DE500 +DE425, DE434, DE435, DE450, DE500 --enable-de4x5 net/de4x5.c --enable-de425 --enable-de434 --enable-de435 + --enable-de450 --enable-de500 -Apricot 82596 +Apricot XEN-II on board ethernet --enable-apricot net/apricot.c -AT&T GIS (NCR) WaveLAN +AT&T WaveLAN & DEC RoamAbout DS --enable-wavelan net/wavelan.c 0x390 -3Com 507 EtherLink16 +3Com 507 --enable-3c507 net/3c507.c --enable-el16 0x300,320,340,280 -3Com 505 Etherlink Plus +3Com 505 --enable-3c505 net/3c505.c --enable-elplus 0x300,280,310 @@ -293,7 +331,45 @@ NI6510 --enable-ni65 net/ni65.c 0x300/320/340/360 -Run-time ATtachable (Pocket) ethernet driver +AT-LAN-TEC/RealTek pocket adaptor --enable-atp net/atp.c 0x378,278,3bc atp%d + +AMD LANCE and PCnet (AT1500 and NE2100) + --enable-lance net/lance.c + --enable-at1500 + --enable-ne2100 + +DECchip Tulip (dc21x4x) PCI + --enable-elcp net/tulip.c + --enable-tulip + +FMV-181/182/183/184 + --enable-fmv18x net/fmv18x.c + +3Com 515 ISA Fast EtherLink + --enable-3c515 net/3c515.c + +AMD PCI PCnet32 (PCI bus NE2100 cards) + --enable-pcnet32 net/pcnet32.c + +PCI NE2000 + --enable-ne2kpci net/ne2k-pci.c + +Packet Engines Yellowfin Gigabit-NIC + --enable-yellowfin net/yellowfin.c + +RealTek 8129/8139 (not 8019/8029!) + --enable-rtl8139 net/rtl8139.c + --enable-rtl8129 + +SMC 83c170/175 EPIC/100 (EtherPower II) + --enable-epic net/epic100.c + --enable-epic100 + +TI ThunderLAN + --enable-tlan net/tlan.c + +VIA Rhine + --enable-viarhine net/via_rhine.c |