2006-06-09 Stefan Siegl <stesie@brokenpipe.de>

* linux/dev/include/asm-i386/uaccess.h: New dummy file.
	* linux/dev/include/linux/pm.h: Likewise.
	* linux/dev/include/linux/threads.h: Likewise.
	* linux/src/include/linux/symtab_begin.h: New file from Linux 2.0.40.
	* linux/src/include/linux/symtab_end.h: Likewise.
	* linux/src/include/linux/module.h: Update from Linux 2.0.40 with minor
	changes.
	* linux/src/include/linux/list.h: New file from Linux 2.2.26.
	* linux/src/include/linux/kcomp.h: Likewise with minor changes.
	* linux/src/include/linux/wait.h: Update from Linux 2.2.26.
	* linux/src/include/linux/wireless.h: Likewise.
	* linux/src/include/asm-i386/bitops.h [__KERNEL__] (ffs, hweight32)
	(hweight16, hweight8): Copy from Linux 2.2.26.

8 files changed, 482 insertions, 64 deletions

diff --git a/linux/src/include/asm-i386/bitops.h b/linux/src/include/asm-i386/bitops.h
index e3ea8f5..d3ed1fb 100644
--- a/linux/src/include/asm-i386/bitops.h
+++ b/linux/src/include/asm-i386/bitops.h
@@ -134,4 +134,34 @@ extern __inline__ unsigned long ffz(unsigned long word)
 	return word;
 }
 
+#ifdef __KERNEL__
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+extern __inline__ int ffs(int x)
+{
+	int r;
+
+	__asm__("bsfl %1,%0\n\t"
+		"jnz 1f\n\t"
+		"movl $-1,%0\n"
+		"1:" : "=r" (r) : "g" (x));
+	return r+1;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
 #endif /* _I386_BITOPS_H */
diff --git a/linux/src/include/linux/kcomp.h b/linux/src/include/linux/kcomp.h
new file mode 100644
index 0000000..1f7344a
--- /dev/null
+++ b/linux/src/include/linux/kcomp.h
@@ -0,0 +1,54 @@
+/*
+ * Kernel compatibility glue to allow USB compile on 2.2.x kernels
+ */
+
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <linux/netdevice.h>
+#include <linux/pagemap.h>
+
+#define __exit
+
+#define pci_enable_device(x)			0
+
+#define page_address(x)				(x | PAGE_OFFSET)
+
+#define	TTY_DRIVER_NO_DEVFS			0
+
+#define	net_device			device
+#define dev_kfree_skb_irq(a)		dev_kfree_skb(a, FREE_WRITE)
+#define netif_wake_queue(dev)		do { clear_bit(0, &dev->tbusy); mark_bh(NET_BH); } while(0)
+#define netif_stop_queue(dev)		test_and_set_bit(0, &dev->tbusy)
+#define netif_start_queue(dev)		do { dev->tbusy = 0; dev->interrupt = 0; dev->start = 1; } while (0)
+#define netif_queue_stopped(dev)	dev->tbusy
+#define netif_running(dev)		dev->start
+
+/* hot-(un)plugging stuff */
+static inline int netif_device_present(struct net_device *dev)
+{
+	return	test_bit(0, &dev->start);
+}
+
+static inline void netif_device_detach(struct net_device *dev)
+{
+	if ( test_and_clear_bit(0, &dev->start) )
+		netif_stop_queue(dev);
+}
+
+static inline void netif_device_attach(struct net_device *dev)
+{
+	if ( !test_and_set_bit(0, &dev->start) )
+		netif_wake_queue(dev);
+}
+
+#define NET_XMIT_SUCCESS	0
+#define NET_XMIT_DROP		1
+#define NET_XMIT_CN		2
+
+#define IORESOURCE_IO			1
+#define pci_resource_start(dev,bar) \
+(((dev)->base_address[(bar)] & PCI_BASE_ADDRESS_SPACE) ? \
+ ((dev)->base_address[(bar)] & PCI_BASE_ADDRESS_IO_MASK) : \
+ ((dev)->base_address[(bar)] & PCI_BASE_ADDRESS_MEM_MASK))
+#define pci_resource_flags(dev, i)	(dev->base_address[i] & IORESOURCE_IO)
+
diff --git a/linux/src/include/linux/list.h b/linux/src/include/linux/list.h
new file mode 100644
index 0000000..27a6ff4
--- /dev/null
+++ b/linux/src/include/linux/list.h
@@ -0,0 +1,112 @@
+#ifndef _LINUX_LIST_H
+#define _LINUX_LIST_H
+
+#ifdef __KERNEL__
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+	struct list_head name = { &name, &name }
+
+#define INIT_LIST_HEAD(ptr) do { \
+	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
+} while (0)
+
+/*
+ * Insert a new entry between two known consecutive entries. 
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static __inline__ void __list_add(struct list_head * new,
+	struct list_head * prev,
+	struct list_head * next)
+{
+	next->prev = new;
+	new->next = next;
+	new->prev = prev;
+	prev->next = new;
+}
+
+/*
+ * Insert a new entry after the specified head..
+ */
+static __inline__ void list_add(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head, head->next);
+}
+
+/*
+ * Insert a new entry at the tail
+ */
+static __inline__ void list_add_tail(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static __inline__ void __list_del(struct list_head * prev,
+				  struct list_head * next)
+{
+	next->prev = prev;
+	prev->next = next;
+}
+
+static __inline__ void list_del(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+}
+
+static __inline__ int list_empty(struct list_head *head)
+{
+	return head->next == head;
+}
+
+/*
+ * Splice in "list" into "head"
+ */
+static __inline__ void list_splice(struct list_head *list, struct list_head *head)
+{
+	struct list_head *first = list->next;
+
+	if (first != list) {
+		struct list_head *last = list->prev;
+		struct list_head *at = head->next;
+
+		first->prev = head;
+		head->next = first;
+
+		last->next = at;
+		at->prev = last;
+	}
+}
+
+#define list_entry(ptr, type, member) \
+	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+
+#define list_for_each(pos, head) \
+        for (pos = (head)->next; pos != (head); pos = pos->next)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/linux/src/include/linux/module.h b/linux/src/include/linux/module.h
index b4b92af..bc364f7 100644
--- a/linux/src/include/linux/module.h
+++ b/linux/src/include/linux/module.h
@@ -46,7 +46,7 @@ struct module_ref {
 struct internal_symbol {
 	void *addr;
 	const char *name;
-	};
+};
 
 struct symbol_table { /* received from "insmod" */
 	int size; /* total, including string table!!! */
@@ -65,7 +65,7 @@ struct module {
 	struct symbol_table *symtab;
 	const char *name;
 	int size;			/* size of module in pages */
-	void* addr;			/* address of module */
+	void *addr;			/* address of module */
 	int state;
 	void (*cleanup)(void);		/* cleanup routine */
 };
@@ -108,12 +108,6 @@ int Using_Versions; /* gcc will handle this global (used as a flag) correctly */
 #endif
 
 /* insert new symbol table */
-extern int register_symtab_from(struct symbol_table *, long *);
-extern void *get_module_symbol(char *, char *);
-#ifdef MODULE
-#define register_symtab(symtab) register_symtab_from(symtab, &mod_use_count_)
-#else
-#define register_symtab(symtab) register_symtab_from(symtab, 0)
-#endif
+#define register_symtab(symtab)
 
 #endif
diff --git a/linux/src/include/linux/symtab_begin.h b/linux/src/include/linux/symtab_begin.h
new file mode 100644
index 0000000..65a8700
--- /dev/null
+++ b/linux/src/include/linux/symtab_begin.h
@@ -0,0 +1,45 @@
+#include <linux/linkage.h>
+
+#ifdef MODVERSIONS
+# undef _set_ver
+# undef X
+/*
+ * These two macros _will_ get enough arguments from the X* macros
+ * since "sym" expands to "symaddr, symstr" from the #define in *.ver
+ */
+# define _basic_version(symaddr,symstr)  symaddr, symstr
+# define _alias_version(really,symaddr,symstr)  (void *) & really , symstr
+
+# ifndef __GENKSYMS__
+#  ifdef MODULE
+#    define _set_ver(sym,ver) \
+	(void *) & sym ## _R ## ver, SYMBOL_NAME_STR(sym) "_R" #ver
+#  else /* !MODULE */
+#    define _set_ver(sym,ver) \
+	(void *) & sym, SYMBOL_NAME_STR(sym) "_R" #ver
+#  endif /* !MODULE */
+#  define X(sym) { _basic_version(sym) }
+/*
+ * For _really_ stacked modules:
+ *
+ * Use "Xalias(local_symbol, symbol_from_other_module)"
+ * to make subsequent modules really use "local_symbol"
+ * when they think that they are using "symbol_from_other_module"
+ *
+ * The "aliasing" module can still use "symbol_from_other_module",
+ * but can now replace and/or modify the behaviour of that symbol.
+ */
+#  define Xalias(really,sym) { _alias_version(really,sym) }
+# endif /* !__GENKSYMS__ */
+#else /* !MODVERSIONS */
+# define X(sym) { (void *) & sym, SYMBOL_NAME_STR(sym)}
+# define Xalias(really,sym) { (void *) & really, SYMBOL_NAME_STR(sym)}
+#endif /* MODVERSIONS */
+/*
+ * Some symbols always need to be unversioned.  This includes
+ * compiler generated calls to functions.
+ */
+#define XNOVERS(sym) { (void *) & sym, SYMBOL_NAME_STR(sym)}
+
+#define EMPTY {0,0}
+	0, 0, 0, {
diff --git a/linux/src/include/linux/symtab_end.h b/linux/src/include/linux/symtab_end.h
new file mode 100644
index 0000000..91b92e2
--- /dev/null
+++ b/linux/src/include/linux/symtab_end.h
@@ -0,0 +1,15 @@
+#ifdef MODVERSIONS
+#undef _set_ver
+#if defined(MODULE) && !defined(__GENKSYMS__)
+#define _set_ver(sym,vers) sym ## _R ## vers
+#else
+#define _set_ver(a,b) a
+#endif
+#endif /* MODVERSIONS */
+#undef X
+#undef EMPTY
+	 /* mark end of table, last entry above ended with a comma! */
+	 { (void *)0, (char *)0 }
+	},
+	/* no module refs, insmod will take care of that instead! */
+	{ { (struct module *)0, (struct module_ref *)0 } }
diff --git a/linux/src/include/linux/wait.h b/linux/src/include/linux/wait.h
index 46f1e4f..96de4aa 100644
--- a/linux/src/include/linux/wait.h
+++ b/linux/src/include/linux/wait.h
@@ -4,16 +4,26 @@
 #define WNOHANG		0x00000001
 #define WUNTRACED	0x00000002
 
-#define __WCLONE	0x80000000
+#define __WALL		0x40000000	/* Wait on all children, regardless of type */
+#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */ 
 
 #ifdef __KERNEL__
 
+#include <asm/page.h>
+
 struct wait_queue {
 	struct task_struct * task;
 	struct wait_queue * next;
 };
 
+typedef struct wait_queue wait_queue_t;
+typedef struct wait_queue *wait_queue_head_t;
+
 #define WAIT_QUEUE_HEAD(x) ((struct wait_queue *)((x)-1))
+#define DECLARE_WAITQUEUE(wait, current)	struct wait_queue wait = { current, NULL }
+#define DECLARE_WAIT_QUEUE_HEAD(wait)		wait_queue_head_t wait
+#define init_waitqueue_head(x)			*(x)=NULL
+#define init_waitqueue_entry(q,p)		((q)->task)=(p)
 
 static inline void init_waitqueue(struct wait_queue **q)
 {
diff --git a/linux/src/include/linux/wireless.h b/linux/src/include/linux/wireless.h
index a368355..c552ff2 100644
--- a/linux/src/include/linux/wireless.h
+++ b/linux/src/include/linux/wireless.h
@@ -1,9 +1,9 @@
 /*
  * This file define a set of standard wireless extensions
  *
- * Version :	4	12.2.97
+ * Version :	9	16.10.99
  *
- * Authors :	Jean Tourrilhes - HPLB - <jt@hplb.hpl.hp.com>
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
  */
 
 #ifndef _LINUX_WIRELESS_H
@@ -63,7 +63,7 @@
  * (there is some stuff that will be added in the future...)
  * I just plan to increment with each new version.
  */
-#define WIRELESS_EXT	5
+#define WIRELESS_EXT	10
 
 /*
  * Changes :
@@ -82,26 +82,55 @@
  * --------
  *	- Missing encoding definitions in range
  *	- Access points stuff
+ *
+ * V5 to V6
+ * --------
+ *	- 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ *	- Changed my e-mail address
+ *	- More 802.11 support (nickname, rate, rts, frag)
+ *	- List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ *	- Support for 'mode of operation' (ad-hoc, managed...)
+ *	- Support for unicast and multicast power saving
+ *	- Change encoding to support larger tokens (>64 bits)
+ *	- Updated iw_params (disable, flags) and use it for NWID
+ *	- Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ *	- Add PM capability to range structure
+ *	- Add PM modifier : MAX/MIN/RELATIVE
+ *	- Add encoding option : IW_ENCODE_NOKEY
+ *	- Add TxPower ioctls (work like TxRate)
  */
 
 /* -------------------------- IOCTL LIST -------------------------- */
 
 /* Basic operations */
-#define SIOCSIWNAME	0x8B00		/* Unused ??? */
-#define SIOCGIWNAME	0x8B01		/* get name */
-#define SIOCSIWNWID	0x8B02		/* set network id */
+#define SIOCSIWNAME	0x8B00		/* Unused */
+#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
+#define SIOCSIWNWID	0x8B02		/* set network id (the cell) */
 #define SIOCGIWNWID	0x8B03		/* get network id */
-#define SIOCSIWFREQ	0x8B04		/* set channel/frequency */
-#define SIOCGIWFREQ	0x8B05		/* get channel/frequency */
-#define SIOCSIWENCODE	0x8B06		/* set encoding info */
-#define SIOCGIWENCODE	0x8B07		/* get encoding info */
-#define SIOCSIWSENS	0x8B08		/* set sensitivity */
-#define SIOCGIWSENS	0x8B09		/* get sensitivity */
+#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
+#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
+#define SIOCSIWMODE	0x8B06		/* set operation mode */
+#define SIOCGIWMODE	0x8B07		/* get operation mode */
+#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
+#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
 
 /* Informative stuff */
-#define SIOCSIWRANGE	0x8B0A		/* Unused ??? */
+#define SIOCSIWRANGE	0x8B0A		/* Unused */
 #define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
-#define SIOCSIWPRIV	0x8B0C		/* Unused ??? */
+#define SIOCSIWPRIV	0x8B0C		/* Unused */
 #define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
 
 /* Mobile IP support */
@@ -109,15 +138,43 @@
 #define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
 
 /* Access Point manipulation */
-#define SIOCSIWAP	0x8B14		/* set access point hardware addresses */
-#define SIOCGIWAP	0x8B15		/* get access point hardware addresses */
+#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
+#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
 #define SIOCGIWAPLIST	0x8B17		/* get list of access point in range */
 
+/* 802.11 specific support */
+#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
+#define SIOCGIWESSID	0x8B1B		/* get ESSID */
+#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
+#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE...
+ * The "flags" member indicate if the ESSID is active or not (promiscuous).
+ */
+
+/* Other parameters usefull in 802.11 and some other devices */
+#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
+#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
+#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
+#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
+#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
+#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
+
 /* ------------------------- IOCTL STUFF ------------------------- */
 
 /* The first and the last (range) */
 #define SIOCIWFIRST	0x8B00
-#define SIOCIWLAST	0x8B17
+#define SIOCIWLAST	0x8B30
 
 /* Even : get (world access), odd : set (root access) */
 #define IW_IS_SET(cmd)	(!((cmd) & 0x1))
@@ -154,23 +211,105 @@
  * don't increase this constant and don't fill the frequency list.
  * The user will be able to set by channel anyway... */
 
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES		8
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER		8
+
 /* Maximum of address that you may set with SPY */
 #define IW_MAX_SPY		8
 
+/* Maximum of address that you may get in the
+   list of access points in range */
+#define IW_MAX_AP		8
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE	32
+
+/* Modes of operation */
+#define IW_MODE_AUTO	0	/* Let the driver decides */
+#define IW_MODE_ADHOC	1	/* Single cell network */
+#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES	8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX	32	/* 256 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
+#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
+#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
+#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
+#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
+#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY         0x0800  /* Key is write only, so not present */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON		0x0000	/* No details... */
+#define IW_POWER_TYPE		0xF000	/* Type of parameter */
+#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
+#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE		0x0F00	/* Power Management mode */
+#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
+#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
+#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
+#define IW_POWER_MAX		0x0002	/* Value is a maximum */
+#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
+#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
+
 /****************************** TYPES ******************************/
 
 /* --------------------------- SUBTYPES --------------------------- */
 /*
+ *	Generic format for most parameters that fit in an int
+ */
+struct	iw_param
+{
+  __s32		value;		/* The value of the parameter itself */
+  __u8		fixed;		/* Hardware should not use auto select */
+  __u8		disabled;	/* Disable the feature */
+  __u16		flags;		/* Various specifc flags (if any) */
+};
+
+/*
+ *	For all data larger than 16 octets, we need to use a
+ *	pointer to memory alocated in user space.
+ */
+struct	iw_point
+{
+  caddr_t	pointer;	/* Pointer to the data  (in user space) */
+  __u16		length;		/* number of fields or size in bytes */
+  __u16		flags;		/* Optional params */
+};
+
+/*
  *	A frequency
- *	For numbers lower than 10^9, we encode the number in 'mant' and
- *	set 'exp' to 0
- *	For number greater than 10^9, we divide it by a power of 10.
- *	The power of 10 is in 'exp', the result is in 'mant'.
+ *	For numbers lower than 10^9, we encode the number in 'm' and
+ *	set 'e' to 0
+ *	For number greater than 10^9, we divide it by the lowest power
+ *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ *	The power of 10 is in 'e', the result of the division is in 'm'.
  */
 struct	iw_freq
 {
 	__u32		m;		/* Mantissa */
 	__u16		e;		/* Exponent */
+	__u8		i;		/* List index (when in range struct) */
 };
 
 /*
@@ -178,7 +317,7 @@ struct	iw_freq
  */
 struct	iw_quality
 {
-	__u8		qual;		/* link quality (SNR or better...) */
+	__u8		qual;		/* link quality (%retries, SNR or better...) */
 	__u8		level;		/* signal level */
 	__u8		noise;		/* noise level */
 	__u8		updated;	/* Flags to know if updated */
@@ -195,25 +334,14 @@ struct	iw_discarded
 	__u32		misc;		/* Others cases */
 };
 
-/*
- *	Encoding information (setting and so on)
- *	Encoding might be hardware encryption, scrambing or others
- */
-struct	iw_encoding
-{
-  __u8	method;			/* Algorithm number / key used */
-  __u64	code;			/* Data/key used for algorithm */
-};
-
-
 /* ------------------------ WIRELESS STATS ------------------------ */
 /*
  * Wireless statistics (used for /proc/net/wireless)
  */
 struct	iw_statistics
 {
-	__u8		status;		/* Status
-					 * - device dependant for now */
+	__u16		status;		/* Status
+					 * - device dependent for now */
 
 	struct iw_quality	qual;		/* Quality of the link
 						 * (instant/mean/max) */
@@ -234,40 +362,36 @@ struct	iwreq
 {
 	union
 	{
-		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "en0" */
+		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
 	} ifr_ifrn;
 
 	/* Data part */
 	union
 	{
 		/* Config - generic */
-		char	name[IFNAMSIZ];
+		char		name[IFNAMSIZ];
 		/* Name : used to verify the presence of  wireless extensions.
 		 * Name of the protocol/provider... */
 
-		struct		/* network id (or domain) : used to */
-		{		/* create logical channels on the air */
-			__u32	nwid;		/* value */
-			__u8	on;		/* active/unactive nwid */
-		}	nwid;
-
+		struct iw_point	essid;	/* Extended network name */
+		struct iw_param	nwid;	/* network id (or domain - the cell) */
 		struct iw_freq	freq;	/* frequency or channel :
 					 * 0-1000 = channel
 					 * > 1000 = frequency in Hz */
 
-		struct iw_encoding	encoding;	/* Encoding stuff */
+		struct iw_param	sens;		/* signal level threshold */
+		struct iw_param	bitrate;	/* default bit rate */
+		struct iw_param	txpower;	/* default transmit power */
+		struct iw_param	rts;		/* RTS threshold threshold */
+		struct iw_param	frag;		/* Fragmentation threshold */
+		__u32		mode;		/* Operation mode */
 
-		__u32	sensitivity;		/* signal level threshold */
+		struct iw_point	encoding;	/* Encoding stuff : tokens */
+		struct iw_param	power;		/* PM duration/timeout */
 
 		struct sockaddr	ap_addr;	/* Access point address */
 
-		struct		/* For all data bigger than 16 octets */
-		{
-			caddr_t	pointer;	/* Pointer to the data
-						 * (in user space) */
-			__u16	length;		/* fields or byte size */
-			__u16	flags;		/* Unused */
-		}	data;
+		struct iw_point	data;		/* Other large parameters */
 	}	u;
 };
 
@@ -285,6 +409,12 @@ struct	iw_range
 {
 	/* Informative stuff (to choose between different interface) */
 	__u32		throughput;	/* To give an idea... */
+	/* In theory this value should be the maximum benchmarked
+	 * TCP/IP throughput, because with most of these devices the
+	 * bit rate is meaningless (overhead an co) to estimate how
+	 * fast the connection will go and pick the fastest one.
+	 * I suggest people to play with Netperf or any benchmark...
+	 */
 
 	/* NWID (or domain id) */
 	__u32		min_nwid;	/* Minimal NWID we are able to set */
@@ -297,13 +427,41 @@ struct	iw_range
 	/* Note : this frequency list doesn't need to fit channel numbers */
 
 	/* signal level threshold range */
-	__u32	sensitivity;
+	__s32	sensitivity;
 
 	/* Quality of link & SNR stuff */
 	struct iw_quality	max_qual;	/* Quality of the link */
 
+	/* Rates */
+	__u8		num_bitrates;	/* Number of entries in the list */
+	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
+
+	/* RTS threshold */
+	__s32		min_rts;	/* Minimal RTS threshold */
+	__s32		max_rts;	/* Maximal RTS threshold */
+
+	/* Frag threshold */
+	__s32		min_frag;	/* Minimal frag threshold */
+	__s32		max_frag;	/* Maximal frag threshold */
+
+	/* Power Management duration & timeout */
+	__s32		min_pmp;	/* Minimal PM period */
+	__s32		max_pmp;	/* Maximal PM period */
+	__s32		min_pmt;	/* Minimal PM timeout */
+	__s32		max_pmt;	/* Maximal PM timeout */
+	__u16		pmp_flags;	/* How to decode max/min PM period */
+	__u16		pmt_flags;	/* How to decode max/min PM timeout */
+	__u16		pm_capa;	/* What PM options are supported */
+
 	/* Encoder stuff */
-	struct iw_encoding	max_encoding;	/* Encoding max range */
+	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
+	__u8	num_encoding_sizes;	/* Number of entry in the list */
+	__u8	max_encoding_tokens;	/* Max number of tokens */
+
+	/* Transmit power */
+	__u16		txpower_capa;	/* What options are supported */
+	__u8		num_txpower;	/* Number of entries in the list */
+	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
 };
 
 /*