1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 1995 insertions, 0 deletions

diff --git a/linux/src/drivers/scsi/u14-34f.c b/linux/src/drivers/scsi/u14-34f.c
new file mode 100644
index 0000000..cad88bc
--- /dev/null
+++ b/linux/src/drivers/scsi/u14-34f.c
@@ -0,0 +1,1995 @@
+/*
+ *      u14-34f.c - Low-level driver for UltraStor 14F/34F SCSI host adapters.
+ *
+ *      26 Jul 1998 Rev. 4.33 for linux 2.0.35 and 2.1.111
+ *          Added command line option (et:[y|n]) to use the existing
+ *          translation (returned by scsicam_bios_param) as disk geometry.
+ *          The default is et:n, which uses the disk geometry jumpered
+ *          on the board.
+ *          The default value et:n is compatible with all previous revisions
+ *          of this driver.
+ *
+ *      28 May 1998 Rev. 4.32 for linux 2.0.33 and 2.1.104
+ *          Increased busy timeout from 10 msec. to 200 msec. while
+ *          processing interrupts.
+ *
+ *      18 May 1998 Rev. 4.31 for linux 2.0.33 and 2.1.102
+ *          Improved abort handling during the eh recovery process.
+ *
+ *      13 May 1998 Rev. 4.30 for linux 2.0.33 and 2.1.101
+ *          The driver is now fully SMP safe, including the
+ *          abort and reset routines.
+ *          Added command line options (eh:[y|n]) to choose between
+ *          new_eh_code and the old scsi code.
+ *          If linux version >= 2.1.101 the default is eh:y, while the eh
+ *          option is ignored for previous releases and the old scsi code
+ *          is used.
+ *
+ *      18 Apr 1998 Rev. 4.20 for linux 2.0.33 and 2.1.97
+ *          Reworked interrupt handler.
+ *
+ *      11 Apr 1998 rev. 4.05 for linux 2.0.33 and 2.1.95
+ *          Major reliability improvement: when a batch with overlapping
+ *          requests is detected, requests are queued one at a time
+ *          eliminating any possible board or drive reordering.
+ *
+ *      10 Apr 1998 rev. 4.04 for linux 2.0.33 and 2.1.95
+ *          Improved SMP support (if linux version >= 2.1.95).
+ *
+ *       9 Apr 1998 rev. 4.03 for linux 2.0.33 and 2.1.94
+ *          Performance improvement: when sequential i/o is detected,
+ *          always use direct sort instead of reverse sort.
+ *
+ *       4 Apr 1998 rev. 4.02 for linux 2.0.33 and 2.1.92
+ *          io_port is now unsigned long.
+ *
+ *      17 Mar 1998 rev. 4.01 for linux 2.0.33 and 2.1.88
+ *          Use new scsi error handling code (if linux version >= 2.1.88).
+ *          Use new interrupt code.
+ *
+ *      12 Sep 1997 rev. 3.11 for linux 2.0.30 and 2.1.55
+ *          Use of udelay inside the wait loops to avoid timeout
+ *          problems with fast cpus.
+ *          Removed check about useless calls to the interrupt service
+ *          routine (reported on SMP systems only).
+ *          At initialization time "sorted/unsorted" is displayed instead
+ *          of "linked/unlinked" to reinforce the fact that "linking" is
+ *          nothing but "elevator sorting" in the actual implementation.
+ *
+ *      17 May 1997 rev. 3.10 for linux 2.0.30 and 2.1.38
+ *          Use of serial_number_at_timeout in abort and reset processing.
+ *          Use of the __initfunc and __initdata macro in setup code.
+ *          Minor cleanups in the list_statistics code.
+ *
+ *      24 Feb 1997 rev. 3.00 for linux 2.0.29 and 2.1.26
+ *          When loading as a module, parameter passing is now supported
+ *          both in 2.0 and in 2.1 style.
+ *          Fixed data transfer direction for some SCSI opcodes.
+ *          Immediate acknowledge to request sense commands.
+ *          Linked commands to each disk device are now reordered by elevator
+ *          sorting. Rare cases in which reordering of write requests could
+ *          cause wrong results are managed.
+ *
+ *      18 Jan 1997 rev. 2.60 for linux 2.1.21 and 2.0.28
+ *          Added command line options to enable/disable linked commands
+ *          (lc:[y|n]), old firmware support (of:[y|n]) and to set the max
+ *          queue depth (mq:xx). Default is "u14-34f=lc:n,of:n,mq:8".
+ *          Improved command linking.
+ *
+ *       8 Jan 1997 rev. 2.50 for linux 2.1.20 and 2.0.27
+ *          Added linked command support.
+ *
+ *       3 Dec 1996 rev. 2.40 for linux 2.1.14 and 2.0.27
+ *          Added queue depth adjustment.
+ *
+ *      22 Nov 1996 rev. 2.30 for linux 2.1.12 and 2.0.26
+ *          The list of i/o ports to be probed can be overwritten by the
+ *          "u14-34f=port0,port1,...." boot command line option.
+ *          Scatter/gather lists are now allocated by a number of kmalloc
+ *          calls, in order to avoid the previous size limit of 64Kb.
+ *
+ *      16 Nov 1996 rev. 2.20 for linux 2.1.10 and 2.0.25
+ *          Added multichannel support.
+ *
+ *      27 Sep 1996 rev. 2.12 for linux 2.1.0
+ *          Portability cleanups (virtual/bus addressing, little/big endian
+ *          support).
+ *
+ *      09 Jul 1996 rev. 2.11 for linux 2.0.4
+ *          "Data over/under-run" no longer implies a redo on all targets.
+ *          Number of internal retries is now limited.
+ *
+ *      16 Apr 1996 rev. 2.10 for linux 1.3.90
+ *          New argument "reset_flags" to the reset routine.
+ *
+ *      21 Jul 1995 rev. 2.02 for linux 1.3.11
+ *          Fixed Data Transfer Direction for some SCSI commands.
+ *
+ *      13 Jun 1995 rev. 2.01 for linux 1.2.10
+ *          HAVE_OLD_UX4F_FIRMWARE should be defined for U34F boards when
+ *          the firmware prom is not the latest one (28008-006).
+ *
+ *      11 Mar 1995 rev. 2.00 for linux 1.2.0
+ *          Fixed a bug which prevented media change detection for removable
+ *          disk drives.
+ *
+ *      23 Feb 1995 rev. 1.18 for linux 1.1.94
+ *          Added a check for scsi_register returning NULL.
+ *
+ *      11 Feb 1995 rev. 1.17 for linux 1.1.91
+ *          U14F qualified to run with 32 sglists.
+ *          Now DEBUG_RESET is disabled by default.
+ *
+ *       9 Feb 1995 rev. 1.16 for linux 1.1.90
+ *          Use host->wish_block instead of host->block.
+ *
+ *       8 Feb 1995 rev. 1.15 for linux 1.1.89
+ *          Cleared target_time_out counter while performing a reset.
+ *
+ *      28 Jan 1995 rev. 1.14 for linux 1.1.86
+ *          Added module support.
+ *          Log and do a retry when a disk drive returns a target status
+ *          different from zero on a recovered error.
+ *          Auto detects if U14F boards have an old firmware revision.
+ *          Max number of scatter/gather lists set to 16 for all boards
+ *          (most installation run fine using 33 sglists, while other
+ *          has problems when using more then 16).
+ *
+ *      16 Jan 1995 rev. 1.13 for linux 1.1.81
+ *          Display a message if check_region detects a port address
+ *          already in use.
+ *
+ *      15 Dec 1994 rev. 1.12 for linux 1.1.74
+ *          The host->block flag is set for all the detected ISA boards.
+ *
+ *      30 Nov 1994 rev. 1.11 for linux 1.1.68
+ *          Redo i/o on target status CHECK_CONDITION for TYPE_DISK only.
+ *          Added optional support for using a single board at a time.
+ *
+ *      14 Nov 1994 rev. 1.10 for linux 1.1.63
+ *
+ *      28 Oct 1994 rev. 1.09 for linux 1.1.58  Final BETA release.
+ *      16 Jul 1994 rev. 1.00 for linux 1.1.29  Initial ALPHA release.
+ *
+ *          This driver is a total replacement of the original UltraStor
+ *          scsi driver, but it supports ONLY the 14F and 34F boards.
+ *          It can be configured in the same kernel in which the original
+ *          ultrastor driver is configured to allow the original U24F
+ *          support.
+ *
+ *          Multiple U14F and/or U34F host adapters are supported.
+ *
+ *  Copyright (C) 1994-1998 Dario Ballabio (dario@milano.europe.dg.com)
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that redistributions of source
+ *  code retain the above copyright notice and this comment without
+ *  modification.
+ *
+ *      WARNING: if your 14/34F board has an old firmware revision (see below)
+ *               you must change "#undef" into "#define" in the following
+ *               statement.
+ */
+#undef HAVE_OLD_UX4F_FIRMWARE
+/*
+ *  The UltraStor 14F, 24F, and 34F are a family of intelligent, high
+ *  performance SCSI-2 host adapters.
+ *  Here is the scoop on the various models:
+ *
+ *  14F - ISA first-party DMA HA with floppy support and WD1003 emulation.
+ *  24F - EISA Bus Master HA with floppy support and WD1003 emulation.
+ *  34F - VESA Local-Bus Bus Master HA (no WD1003 emulation).
+ *
+ *  This code has been tested with up to two U14F boards, using both
+ *  firmware 28004-005/38004-004 (BIOS rev. 2.00) and the latest firmware
+ *  28004-006/38004-005 (BIOS rev. 2.01).
+ *
+ *  The latest firmware is required in order to get reliable operations when
+ *  clustering is enabled. ENABLE_CLUSTERING provides a performance increase
+ *  up to 50% on sequential access.
+ *
+ *  Since the Scsi_Host_Template structure is shared among all 14F and 34F,
+ *  the last setting of use_clustering is in effect for all of these boards.
+ *
+ *  Here a sample configuration using two U14F boards:
+ *
+ U14F0: ISA 0x330, BIOS 0xc8000, IRQ 11, DMA 5, SG 32, MB 16, of:n, lc:y, mq:8.
+ U14F1: ISA 0x340, BIOS 0x00000, IRQ 10, DMA 6, SG 32, MB 16, of:n, lc:y, mq:8.
+ *
+ *  The boot controller must have its BIOS enabled, while other boards can
+ *  have their BIOS disabled, or enabled to an higher address.
+ *  Boards are named Ux4F0, Ux4F1..., according to the port address order in
+ *  the io_port[] array.
+ *
+ *  The following facts are based on real testing results (not on
+ *  documentation) on the above U14F board.
+ *
+ *  - The U14F board should be jumpered for bus on time less or equal to 7
+ *    microseconds, while the default is 11 microseconds. This is order to
+ *    get acceptable performance while using floppy drive and hard disk
+ *    together. The jumpering for 7 microseconds is: JP13 pin 15-16,
+ *    JP14 pin 7-8 and pin 9-10.
+ *    The reduction has a little impact on scsi performance.
+ *
+ *  - If scsi bus length exceeds 3m., the scsi bus speed needs to be reduced
+ *    from 10Mhz to 5Mhz (do this by inserting a jumper on JP13 pin 7-8).
+ *
+ *  - If U14F on board firmware is older than 28004-006/38004-005,
+ *    the U14F board is unable to provide reliable operations if the scsi
+ *    request length exceeds 16Kbyte. When this length is exceeded the
+ *    behavior is:
+ *    - adapter_status equal 0x96 or 0xa3 or 0x93 or 0x94;
+ *    - adapter_status equal 0 and target_status equal 2 on for all targets
+ *      in the next operation following the reset.
+ *    This sequence takes a long time (>3 seconds), so in the meantime
+ *    the SD_TIMEOUT in sd.c could expire giving rise to scsi aborts
+ *    (SD_TIMEOUT has been increased from 3 to 6 seconds in 1.1.31).
+ *    Because of this I had to DISABLE_CLUSTERING and to work around the
+ *    bus reset in the interrupt service routine, returning DID_BUS_BUSY
+ *    so that the operations are retried without complains from the scsi.c
+ *    code.
+ *    Any reset of the scsi bus is going to kill tape operations, since
+ *    no retry is allowed for tapes. Bus resets are more likely when the
+ *    scsi bus is under heavy load.
+ *    Requests using scatter/gather have a maximum length of 16 x 1024 bytes
+ *    when DISABLE_CLUSTERING is in effect, but unscattered requests could be
+ *    larger than 16Kbyte.
+ *
+ *    The new firmware has fixed all the above problems.
+ *
+ *  For U34F boards the latest bios prom is 38008-002 (BIOS rev. 2.01),
+ *  the latest firmware prom is 28008-006. Older firmware 28008-005 has
+ *  problems when using more then 16 scatter/gather lists.
+ *
+ *  The list of i/o ports to be probed can be totally replaced by the
+ *  boot command line option: "u14-34f=port0,port1,port2,...", where the
+ *  port0, port1... arguments are ISA/VESA addresses to be probed.
+ *  For example using "u14-34f=0x230,0x340", the driver probes only the two
+ *  addresses 0x230 and 0x340 in this order; "u14-34f=0" totally disables
+ *  this driver.
+ *
+ *  After the optional list of detection probes, other possible command line
+ *  options are:
+ *
+ *  eh:y  use new scsi code (linux 2.2 only);
+ *  eh:n  use old scsi code;
+ *  et:y  use disk geometry returned by scsicam_bios_param;
+ *  et:n  use disk geometry jumpered on the board;
+ *  lc:y  enables linked commands;
+ *  lc:n  disables linked commands;
+ *  of:y  enables old firmware support;
+ *  of:n  disables old firmware support;
+ *  mq:xx set the max queue depth to the value xx (2 <= xx <= 8).
+ *
+ *  The default value is: "u14-34f=lc:n,of:n,mq:8,et:n".
+ *  An example using the list of detection probes could be:
+ *  "u14-34f=0x230,0x340,lc:y,of:n,mq:4,eh:n,et:n".
+ *
+ *  When loading as a module, parameters can be specified as well.
+ *  The above example would be (use 1 in place of y and 0 in place of n):
+ *
+ *  modprobe u14-34f io_port=0x230,0x340 linked_comm=1 have_old_firmware=0 \
+ *                max_queue_depth=4 use_new_eh_code=0 ext_tran=0
+ *
+ *  ----------------------------------------------------------------------------
+ *  In this implementation, linked commands are designed to work with any DISK
+ *  or CD-ROM, since this linking has only the intent of clustering (time-wise)
+ *  and reordering by elevator sorting commands directed to each device,
+ *  without any relation with the actual SCSI protocol between the controller
+ *  and the device.
+ *  If Q is the queue depth reported at boot time for each device (also named
+ *  cmds/lun) and Q > 2, whenever there is already an active command to the
+ *  device all other commands to the same device  (up to Q-1) are kept waiting
+ *  in the elevator sorting queue. When the active command completes, the
+ *  commands in this queue are sorted by sector address. The sort is chosen
+ *  between increasing or decreasing by minimizing the seek distance between
+ *  the sector of the commands just completed and the sector of the first
+ *  command in the list to be sorted.
+ *  Trivial math assures that the unsorted average seek distance when doing
+ *  random seeks over S sectors is S/3.
+ *  When (Q-1) requests are uniformly distributed over S sectors, the average
+ *  distance between two adjacent requests is S/((Q-1) + 1), so the sorted
+ *  average seek distance for (Q-1) random requests over S sectors is S/Q.
+ *  The elevator sorting hence divides the seek distance by a factor Q/3.
+ *  The above pure geometric remarks are valid in all cases and the
+ *  driver effectively reduces the seek distance by the predicted factor
+ *  when there are Q concurrent read i/o operations on the device, but this
+ *  does not necessarily results in a noticeable performance improvement:
+ *  your mileage may vary....
+ *
+ *  Note: command reordering inside a batch of queued commands could cause
+ *        wrong results only if there is at least one write request and the
+ *        intersection (sector-wise) of all requests is not empty.
+ *        When the driver detects a batch including overlapping requests
+ *        (a really rare event) strict serial (pid) order is enforced.
+ *  ----------------------------------------------------------------------------
+ *
+ *  The boards are named Ux4F0, Ux4F1,... according to the detection order.
+ *
+ *  In order to support multiple ISA boards in a reliable way,
+ *  the driver sets host->wish_block = TRUE for all ISA boards.
+ */
+
+#include <linux/version.h>
+
+#define LinuxVersionCode(v, p, s) (((v)<<16)+((p)<<8)+(s))
+#define MAX_INT_PARAM 10
+
+#if defined(MODULE)
+#include <linux/module.h>
+
+#if LINUX_VERSION_CODE >= LinuxVersionCode(2,1,26)
+MODULE_PARM(io_port, "1-" __MODULE_STRING(MAX_INT_PARAM) "i");
+MODULE_PARM(linked_comm, "i");
+MODULE_PARM(have_old_firmware, "i");
+MODULE_PARM(link_statistics, "i");
+MODULE_PARM(max_queue_depth, "i");
+MODULE_PARM(use_new_eh_code, "i");
+MODULE_PARM(ext_tran, "i");
+MODULE_AUTHOR("Dario Ballabio");
+#endif
+
+#endif
+
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <linux/proc_fs.h>
+#include <linux/blk.h>
+#include "scsi.h"
+#include "hosts.h"
+#include "sd.h"
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include "u14-34f.h"
+#include <linux/stat.h>
+#include <linux/config.h>
+
+#if LINUX_VERSION_CODE >= LinuxVersionCode(2,1,36)
+#include <linux/init.h>
+#else
+#define __initfunc(A) A
+#define __initdata
+#define __init
+#endif
+
+#if LINUX_VERSION_CODE >= LinuxVersionCode(2,1,101)
+#include <asm/spinlock.h>
+#define IRQ_FLAGS
+#define IRQ_LOCK
+#define IRQ_LOCK_SAVE
+#define IRQ_UNLOCK
+#define IRQ_UNLOCK_RESTORE
+#define SPIN_FLAGS unsigned long spin_flags;
+#define SPIN_LOCK spin_lock_irq(&io_request_lock);
+#define SPIN_LOCK_SAVE spin_lock_irqsave(&io_request_lock, spin_flags);
+#define SPIN_UNLOCK spin_unlock_irq(&io_request_lock);
+#define SPIN_UNLOCK_RESTORE \
+                  spin_unlock_irqrestore(&io_request_lock, spin_flags);
+static int use_new_eh_code = TRUE;
+#else
+#define IRQ_FLAGS unsigned long irq_flags;
+#define IRQ_LOCK cli();
+#define IRQ_LOCK_SAVE do {save_flags(irq_flags); cli();} while (0);
+#define IRQ_UNLOCK sti();
+#define IRQ_UNLOCK_RESTORE do {restore_flags(irq_flags);} while (0);
+#define SPIN_FLAGS
+#define SPIN_LOCK
+#define SPIN_LOCK_SAVE
+#define SPIN_UNLOCK
+#define SPIN_UNLOCK_RESTORE
+static int use_new_eh_code = FALSE;
+#endif
+
+struct proc_dir_entry proc_scsi_u14_34f = {
+    PROC_SCSI_U14_34F, 6, "u14_34f",
+    S_IFDIR | S_IRUGO | S_IXUGO, 2
+};
+
+/* Values for the PRODUCT_ID ports for the 14/34F */
+#define PRODUCT_ID1  0x56
+#define PRODUCT_ID2  0x40        /* NOTE: Only upper nibble is used */
+
+/* Subversion values */
+#define ISA  0
+#define ESA 1
+
+#define OP_HOST_ADAPTER   0x1
+#define OP_SCSI           0x2
+#define OP_RESET          0x4
+#define DTD_SCSI          0x0
+#define DTD_IN            0x1
+#define DTD_OUT           0x2
+#define DTD_NONE          0x3
+#define HA_CMD_INQUIRY    0x1
+#define HA_CMD_SELF_DIAG  0x2
+#define HA_CMD_READ_BUFF  0x3
+#define HA_CMD_WRITE_BUFF 0x4
+
+#undef  DEBUG_LINKED_COMMANDS
+#undef  DEBUG_DETECT
+#undef  DEBUG_INTERRUPT
+#undef  DEBUG_RESET
+#undef  DEBUG_GENERATE_ERRORS
+#undef  DEBUG_GENERATE_ABORTS
+#undef  DEBUG_GEOMETRY
+
+#define MAX_ISA 3
+#define MAX_VESA 1
+#define MAX_EISA 0
+#define MAX_PCI 0
+#define MAX_BOARDS (MAX_ISA + MAX_VESA + MAX_EISA + MAX_PCI)
+#define MAX_CHANNEL 1
+#define MAX_LUN 8
+#define MAX_TARGET 8
+#define MAX_MAILBOXES 16
+#define MAX_SGLIST 32
+#define MAX_SAFE_SGLIST 16
+#define MAX_INTERNAL_RETRIES 64
+#define MAX_CMD_PER_LUN 2
+#define MAX_TAGGED_CMD_PER_LUN (MAX_MAILBOXES - MAX_CMD_PER_LUN)
+
+#define SKIP ULONG_MAX
+#define FALSE 0
+#define TRUE 1
+#define FREE 0
+#define IN_USE   1
+#define LOCKED   2
+#define IN_RESET 3
+#define IGNORE   4
+#define READY    5
+#define ABORTING 6
+#define NO_DMA  0xff
+#define MAXLOOP  10000
+
+#define REG_LCL_MASK      0
+#define REG_LCL_INTR      1
+#define REG_SYS_MASK      2
+#define REG_SYS_INTR      3
+#define REG_PRODUCT_ID1   4
+#define REG_PRODUCT_ID2   5
+#define REG_CONFIG1       6
+#define REG_CONFIG2       7
+#define REG_OGM           8
+#define REG_ICM           12
+#define REGION_SIZE       13
+#define BSY_ASSERTED      0x01
+#define IRQ_ASSERTED      0x01
+#define CMD_RESET         0xc0
+#define CMD_OGM_INTR      0x01
+#define CMD_CLR_INTR      0x01
+#define CMD_ENA_INTR      0x81
+#define ASOK              0x00
+#define ASST              0x91
+
+#define ARRAY_SIZE(arr) (sizeof (arr) / sizeof (arr)[0])
+#define YESNO(a) ((a) ? 'y' : 'n')
+#define TLDEV(type) ((type) == TYPE_DISK || (type) == TYPE_ROM)
+
+#define PACKED          __attribute__((packed))
+
+struct sg_list {
+   unsigned int address;                /* Segment Address */
+   unsigned int num_bytes;              /* Segment Length */
+   };
+
+/* MailBox SCSI Command Packet */
+struct mscp {
+   unsigned char opcode: 3;             /* type of command */
+   unsigned char xdir: 2;               /* data transfer direction */
+   unsigned char dcn: 1;                /* disable disconnect */
+   unsigned char ca: 1;                 /* use cache (if available) */
+   unsigned char sg: 1;                 /* scatter/gather operation */
+   unsigned char target: 3;             /* SCSI target id */
+   unsigned char channel: 2;            /* SCSI channel number */
+   unsigned char lun: 3;                /* SCSI logical unit number */
+   unsigned int data_address PACKED;    /* transfer data pointer */
+   unsigned int data_len PACKED;        /* length in bytes */
+   unsigned int link_address PACKED;    /* for linking command chains */
+   unsigned char clink_id;              /* identifies command in chain */
+   unsigned char use_sg;                /* (if sg is set) 8 bytes per list */
+   unsigned char sense_len;
+   unsigned char scsi_cdbs_len;         /* 6, 10, or 12 */
+   unsigned char scsi_cdbs[12];         /* SCSI commands */
+   unsigned char adapter_status;        /* non-zero indicates HA error */
+   unsigned char target_status;         /* non-zero indicates target error */
+   unsigned int sense_addr PACKED;
+   Scsi_Cmnd *SCpnt;
+   unsigned int index;                  /* cp index */
+   struct sg_list *sglist;
+   };
+
+struct hostdata {
+   struct mscp cp[MAX_MAILBOXES];       /* Mailboxes for this board */
+   unsigned int cp_stat[MAX_MAILBOXES]; /* FREE, IN_USE, LOCKED, IN_RESET */
+   unsigned int last_cp_used;           /* Index of last mailbox used */
+   unsigned int iocount;                /* Total i/o done for this board */
+   int board_number;                    /* Number of this board */
+   char board_name[16];                 /* Name of this board */
+   char board_id[256];                  /* data from INQUIRY on this board */
+   int in_reset;                        /* True if board is doing a reset */
+   int target_to[MAX_TARGET][MAX_CHANNEL]; /* N. of timeout errors on target */
+   int target_redo[MAX_TARGET][MAX_CHANNEL]; /* If TRUE redo i/o on target */
+   unsigned int retries;                /* Number of internal retries */
+   unsigned long last_retried_pid;      /* Pid of last retried command */
+   unsigned char subversion;            /* Bus type, either ISA or ESA */
+   unsigned char heads;
+   unsigned char sectors;
+
+   /* slot != 0 for the U24F, slot == 0 for both the U14F and U34F */
+   unsigned char slot;
+   };
+
+static struct Scsi_Host *sh[MAX_BOARDS + 1];
+static const char *driver_name = "Ux4F";
+static char sha[MAX_BOARDS];
+
+/* Initialize num_boards so that ihdlr can work while detect is in progress */
+static unsigned int num_boards = MAX_BOARDS;
+
+static unsigned long io_port[] __initdata = {
+
+   /* Space for MAX_INT_PARAM ports usable while loading as a module */
+   SKIP,    SKIP,   SKIP,   SKIP,   SKIP,   SKIP,   SKIP,   SKIP,
+   SKIP,    SKIP,
+
+   /* Possible ISA/VESA ports */
+   0x330, 0x340, 0x230, 0x240, 0x210, 0x130, 0x140,
+
+   /* End of list */
+   0x0
+   };
+
+#define HD(board) ((struct hostdata *) &sh[board]->hostdata)
+#define BN(board) (HD(board)->board_name)
+
+#define SWAP_BYTE(x) ((unsigned long)( \
+        (((unsigned long)(x) & 0x000000ffU) << 24) | \
+        (((unsigned long)(x) & 0x0000ff00U) <<  8) | \
+        (((unsigned long)(x) & 0x00ff0000U) >>  8) | \
+        (((unsigned long)(x) & 0xff000000U) >> 24)))
+
+#if defined(__BIG_ENDIAN)
+#define H2DEV(x) SWAP_BYTE(x)
+#else
+#define H2DEV(x) (x)
+#endif
+
+#define DEV2H(x) H2DEV(x)
+#define V2DEV(addr) ((addr) ? H2DEV(virt_to_bus((void *)addr)) : 0)
+#define DEV2V(addr) ((addr) ? DEV2H(bus_to_virt((unsigned long)addr)) : 0)
+
+static void do_interrupt_handler(int, void *, struct pt_regs *);
+static void flush_dev(Scsi_Device *, unsigned long, unsigned int, unsigned int);
+static int do_trace = FALSE;
+static int setup_done = FALSE;
+static int link_statistics = 0;
+static int ext_tran = FALSE;
+
+#if defined(HAVE_OLD_UX4F_FIRMWARE)
+static int have_old_firmware = TRUE;
+#else
+static int have_old_firmware = FALSE;
+#endif
+
+#if defined(CONFIG_SCSI_U14_34F_LINKED_COMMANDS)
+static int linked_comm = TRUE;
+#else
+static int linked_comm = FALSE;
+#endif
+
+#if defined(CONFIG_SCSI_U14_34F_MAX_TAGS)
+static int max_queue_depth = CONFIG_SCSI_U14_34F_MAX_TAGS;
+#else
+static int max_queue_depth = MAX_CMD_PER_LUN;
+#endif
+
+static void select_queue_depths(struct Scsi_Host *host, Scsi_Device *devlist) {
+   Scsi_Device *dev;
+   int j, ntag = 0, nuntag = 0, tqd, utqd;
+   IRQ_FLAGS
+
+   IRQ_LOCK_SAVE
+   j = ((struct hostdata *) host->hostdata)->board_number;
+
+   for(dev = devlist; dev; dev = dev->next) {
+
+      if (dev->host != host) continue;
+
+      if (TLDEV(dev->type) && (dev->tagged_supported || linked_comm))
+         ntag++;
+      else
+         nuntag++;
+      }
+
+   utqd = MAX_CMD_PER_LUN;
+
+   tqd = (host->can_queue - utqd * nuntag) / (ntag ? ntag : 1);
+
+   if (tqd > max_queue_depth) tqd = max_queue_depth;
+
+   if (tqd < MAX_CMD_PER_LUN) tqd = MAX_CMD_PER_LUN;
+
+   for(dev = devlist; dev; dev = dev->next) {
+      char *tag_suffix = "", *link_suffix = "";
+
+      if (dev->host != host) continue;
+
+      if (TLDEV(dev->type) && (dev->tagged_supported || linked_comm))
+         dev->queue_depth = tqd;
+      else
+         dev->queue_depth = utqd;
+
+      if (TLDEV(dev->type)) {
+         if (linked_comm && dev->queue_depth > 2)
+            link_suffix = ", sorted";
+         else
+            link_suffix = ", unsorted";
+         }
+
+      if (dev->tagged_supported && TLDEV(dev->type) && dev->tagged_queue)
+         tag_suffix = ", tagged";
+      else if (dev->tagged_supported && TLDEV(dev->type))
+         tag_suffix = ", untagged";
+
+      printk("%s: scsi%d, channel %d, id %d, lun %d, cmds/lun %d%s%s.\n",
+             BN(j), host->host_no, dev->channel, dev->id, dev->lun,
+             dev->queue_depth, link_suffix, tag_suffix);
+      }
+
+   IRQ_UNLOCK_RESTORE
+   return;
+}
+
+static inline int wait_on_busy(unsigned long iobase, unsigned int loop) {
+
+   while (inb(iobase + REG_LCL_INTR) & BSY_ASSERTED) {
+      udelay(1L);
+      if (--loop == 0) return TRUE;
+      }
+
+   return FALSE;
+}
+
+static int board_inquiry(unsigned int j) {
+   struct mscp *cpp;
+   unsigned int time, limit = 0;
+
+   cpp = &HD(j)->cp[0];
+   memset(cpp, 0, sizeof(struct mscp));
+   cpp->opcode = OP_HOST_ADAPTER;
+   cpp->xdir = DTD_IN;
+   cpp->data_address = V2DEV(HD(j)->board_id);
+   cpp->data_len = H2DEV(sizeof(HD(j)->board_id));
+   cpp->scsi_cdbs_len = 6;
+   cpp->scsi_cdbs[0] = HA_CMD_INQUIRY;
+
+   if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+      printk("%s: board_inquiry, adapter busy.\n", BN(j));
+      return TRUE;
+      }
+
+   HD(j)->cp_stat[0] = IGNORE;
+
+   /* Clear the interrupt indication */
+   outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
+
+   /* Store pointer in OGM address bytes */
+   outl(V2DEV(cpp), sh[j]->io_port + REG_OGM);
+
+   /* Issue OGM interrupt */
+   outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
+
+   SPIN_UNLOCK
+   IRQ_UNLOCK
+   time = jiffies;
+   while ((jiffies - time) < HZ && limit++ < 20000) udelay(100L);
+   IRQ_LOCK
+   SPIN_LOCK
+
+   if (cpp->adapter_status || HD(j)->cp_stat[0] != FREE) {
+      HD(j)->cp_stat[0] = FREE;
+      printk("%s: board_inquiry, err 0x%x.\n", BN(j), cpp->adapter_status);
+      return TRUE;
+      }
+
+   return FALSE;
+}
+
+__initfunc (static inline int port_detect \
+      (unsigned long port_base, unsigned int j, Scsi_Host_Template *tpnt)) {
+   unsigned char irq, dma_channel, subversion, i;
+   unsigned char in_byte;
+   char *bus_type, dma_name[16];
+
+   /* Allowed BIOS base addresses (NULL indicates reserved) */
+   void *bios_segment_table[8] = {
+      NULL,
+      (void *) 0xc4000, (void *) 0xc8000, (void *) 0xcc000, (void *) 0xd0000,
+      (void *) 0xd4000, (void *) 0xd8000, (void *) 0xdc000
+      };
+
+   /* Allowed IRQs */
+   unsigned char interrupt_table[4] = { 15, 14, 11, 10 };
+
+   /* Allowed DMA channels for ISA (0 indicates reserved) */
+   unsigned char dma_channel_table[4] = { 5, 6, 7, 0 };
+
+   /* Head/sector mappings */
+   struct {
+      unsigned char heads;
+      unsigned char sectors;
+      } mapping_table[4] = {
+           { 16, 63 }, { 64, 32 }, { 64, 63 }, { 64, 32 }
+           };
+
+   struct config_1 {
+      unsigned char bios_segment: 3;
+      unsigned char removable_disks_as_fixed: 1;
+      unsigned char interrupt: 2;
+      unsigned char dma_channel: 2;
+      } config_1;
+
+   struct config_2 {
+      unsigned char ha_scsi_id: 3;
+      unsigned char mapping_mode: 2;
+      unsigned char bios_drive_number: 1;
+      unsigned char tfr_port: 2;
+      } config_2;
+
+   char name[16];
+
+   sprintf(name, "%s%d", driver_name, j);
+
+   if(check_region(port_base, REGION_SIZE)) {
+      printk("%s: address 0x%03lx in use, skipping probe.\n", name, port_base);
+      return FALSE;
+      }
+
+   if (inb(port_base + REG_PRODUCT_ID1) != PRODUCT_ID1) return FALSE;
+
+   in_byte = inb(port_base + REG_PRODUCT_ID2);
+
+   if ((in_byte & 0xf0) != PRODUCT_ID2) return FALSE;
+
+   *(char *)&config_1 = inb(port_base + REG_CONFIG1);
+   *(char *)&config_2 = inb(port_base + REG_CONFIG2);
+
+   irq = interrupt_table[config_1.interrupt];
+   dma_channel = dma_channel_table[config_1.dma_channel];
+   subversion = (in_byte & 0x0f);
+
+   /* Board detected, allocate its IRQ */
+   if (request_irq(irq, do_interrupt_handler,
+             SA_INTERRUPT | ((subversion == ESA) ? SA_SHIRQ : 0),
+             driver_name, (void *) &sha[j])) {
+      printk("%s: unable to allocate IRQ %u, detaching.\n", name, irq);
+      return FALSE;
+      }
+
+   if (subversion == ISA && request_dma(dma_channel, driver_name)) {
+      printk("%s: unable to allocate DMA channel %u, detaching.\n",
+             name, dma_channel);
+      free_irq(irq, &sha[j]);
+      return FALSE;
+      }
+
+   if (have_old_firmware) tpnt->use_clustering = DISABLE_CLUSTERING;
+
+#if LINUX_VERSION_CODE >= LinuxVersionCode(2,1,101)
+   tpnt->use_new_eh_code = use_new_eh_code;
+#else
+   use_new_eh_code = FALSE;
+#endif
+
+   sh[j] = scsi_register(tpnt, sizeof(struct hostdata));
+
+   if (sh[j] == NULL) {
+      printk("%s: unable to register host, detaching.\n", name);
+
+      free_irq(irq, &sha[j]);
+
+      if (subversion == ISA) free_dma(dma_channel);
+
+      return FALSE;
+      }
+
+   sh[j]->io_port = port_base;
+   sh[j]->unique_id = port_base;
+   sh[j]->n_io_port = REGION_SIZE;
+   sh[j]->base = bios_segment_table[config_1.bios_segment];
+   sh[j]->irq = irq;
+   sh[j]->sg_tablesize = MAX_SGLIST;
+   sh[j]->this_id = config_2.ha_scsi_id;
+   sh[j]->can_queue = MAX_MAILBOXES;
+   sh[j]->cmd_per_lun = MAX_CMD_PER_LUN;
+   sh[j]->select_queue_depths = select_queue_depths;
+
+#if defined(DEBUG_DETECT)
+   {
+   unsigned char sys_mask, lcl_mask;
+
+   sys_mask = inb(sh[j]->io_port + REG_SYS_MASK);
+   lcl_mask = inb(sh[j]->io_port + REG_LCL_MASK);
+   printk("SYS_MASK 0x%x, LCL_MASK 0x%x.\n", sys_mask, lcl_mask);
+   }
+#endif
+
+   /* Probably a bogus host scsi id, set it to the dummy value */
+   if (sh[j]->this_id == 0) sh[j]->this_id = -1;
+
+   /* If BIOS is disabled, force enable interrupts */
+   if (sh[j]->base == 0) outb(CMD_ENA_INTR, sh[j]->io_port + REG_SYS_MASK);
+
+   /* Register the I/O space that we use */
+   request_region(sh[j]->io_port, sh[j]->n_io_port, driver_name);
+
+   memset(HD(j), 0, sizeof(struct hostdata));
+   HD(j)->heads = mapping_table[config_2.mapping_mode].heads;
+   HD(j)->sectors = mapping_table[config_2.mapping_mode].sectors;
+   HD(j)->subversion = subversion;
+   HD(j)->board_number = j;
+
+   if (have_old_firmware) sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
+
+   if (HD(j)->subversion == ESA) {
+      sh[j]->unchecked_isa_dma = FALSE;
+      sh[j]->dma_channel = NO_DMA;
+      sprintf(BN(j), "U34F%d", j);
+      bus_type = "VESA";
+      }
+   else {
+      sh[j]->wish_block = TRUE;
+      sh[j]->unchecked_isa_dma = TRUE;
+      disable_dma(dma_channel);
+      clear_dma_ff(dma_channel);
+      set_dma_mode(dma_channel, DMA_MODE_CASCADE);
+      enable_dma(dma_channel);
+      sh[j]->dma_channel = dma_channel;
+      sprintf(BN(j), "U14F%d", j);
+      bus_type = "ISA";
+      }
+
+   sh[j]->max_channel = MAX_CHANNEL - 1;
+   sh[j]->max_id = MAX_TARGET;
+   sh[j]->max_lun = MAX_LUN;
+
+   if (HD(j)->subversion == ISA && !board_inquiry(j)) {
+      HD(j)->board_id[40] = 0;
+
+      if (strcmp(&HD(j)->board_id[32], "06000600")) {
+         printk("%s: %s.\n", BN(j), &HD(j)->board_id[8]);
+         printk("%s: firmware %s is outdated, FW PROM should be 28004-006.\n",
+                BN(j), &HD(j)->board_id[32]);
+         sh[j]->hostt->use_clustering = DISABLE_CLUSTERING;
+         sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
+         }
+      }
+
+   if (dma_channel == NO_DMA) sprintf(dma_name, "%s", "BMST");
+   else                       sprintf(dma_name, "DMA %u", dma_channel);
+
+   for (i = 0; i < sh[j]->can_queue; i++)
+      if (! ((&HD(j)->cp[i])->sglist = kmalloc(
+            sh[j]->sg_tablesize * sizeof(struct sg_list),
+            (sh[j]->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC))) {
+         printk("%s: kmalloc SGlist failed, mbox %d, detaching.\n", BN(j), i);
+         u14_34f_release(sh[j]);
+         return FALSE;
+         }
+
+   if (max_queue_depth > MAX_TAGGED_CMD_PER_LUN)
+       max_queue_depth = MAX_TAGGED_CMD_PER_LUN;
+
+   if (max_queue_depth < MAX_CMD_PER_LUN) max_queue_depth = MAX_CMD_PER_LUN;
+
+   if (j == 0) {
+      printk("UltraStor 14F/34F: Copyright (C) 1994-1998 Dario Ballabio.\n");
+      printk("%s config options -> of:%c, lc:%c, mq:%d, eh:%c, et:%c.\n",
+             driver_name, YESNO(have_old_firmware), YESNO(linked_comm),
+             max_queue_depth, YESNO(use_new_eh_code), YESNO(ext_tran));
+      }
+
+   printk("%s: %s 0x%03lx, BIOS 0x%05x, IRQ %u, %s, SG %d, MB %d.\n",
+          BN(j), bus_type, (unsigned long)sh[j]->io_port, (int)sh[j]->base,
+          sh[j]->irq, dma_name, sh[j]->sg_tablesize, sh[j]->can_queue);
+
+   if (sh[j]->max_id > 8 || sh[j]->max_lun > 8)
+      printk("%s: wide SCSI support enabled, max_id %u, max_lun %u.\n",
+             BN(j), sh[j]->max_id, sh[j]->max_lun);
+
+   for (i = 0; i <= sh[j]->max_channel; i++)
+      printk("%s: SCSI channel %u enabled, host target ID %d.\n",
+             BN(j), i, sh[j]->this_id);
+
+   return TRUE;
+}
+
+__initfunc (void u14_34f_setup(char *str, int *ints)) {
+   int i, argc = ints[0];
+   char *cur = str, *pc;
+
+   if (argc > 0) {
+
+      if (argc > MAX_INT_PARAM) argc = MAX_INT_PARAM;
+
+      for (i = 0; i < argc; i++) io_port[i] = ints[i + 1];
+
+      io_port[i] = 0;
+      setup_done = TRUE;
+      }
+
+   while (cur && (pc = strchr(cur, ':'))) {
+      int val = 0, c = *++pc;
+
+      if (c == 'n' || c == 'N') val = FALSE;
+      else if (c == 'y' || c == 'Y') val = TRUE;
+      else val = (int) simple_strtoul(pc, NULL, 0);
+
+      if (!strncmp(cur, "lc:", 3)) linked_comm = val;
+      else if (!strncmp(cur, "of:", 3)) have_old_firmware = val;
+      else if (!strncmp(cur, "mq:", 3))  max_queue_depth = val;
+      else if (!strncmp(cur, "ls:", 3))  link_statistics = val;
+      else if (!strncmp(cur, "eh:", 3))  use_new_eh_code = val;
+      else if (!strncmp(cur, "et:", 3))  ext_tran = val;
+
+      if ((cur = strchr(cur, ','))) ++cur;
+      }
+
+   return;
+}
+
+__initfunc (int u14_34f_detect(Scsi_Host_Template *tpnt)) {
+   unsigned int j = 0, k;
+   IRQ_FLAGS
+
+   IRQ_LOCK_SAVE
+   tpnt->proc_dir = &proc_scsi_u14_34f;
+
+#if defined(MODULE)
+   /* io_port could have been modified when loading as a module */
+   if(io_port[0] != SKIP) {
+      setup_done = TRUE;
+      io_port[MAX_INT_PARAM] = 0;
+      }
+#endif
+
+   for (k = 0; k < MAX_BOARDS + 1; k++) sh[k] = NULL;
+
+   for (k = 0; io_port[k]; k++) {
+
+      if (io_port[k] == SKIP) continue;
+
+      if (j < MAX_BOARDS && port_detect(io_port[k], j, tpnt)) j++;
+      }
+
+   num_boards = j;
+   IRQ_UNLOCK_RESTORE
+   return j;
+}
+
+static inline void build_sg_list(struct mscp *cpp, Scsi_Cmnd *SCpnt) {
+   unsigned int k, data_len = 0;
+   struct scatterlist *sgpnt;
+
+   sgpnt = (struct scatterlist *) SCpnt->request_buffer;
+
+   for (k = 0; k < SCpnt->use_sg; k++) {
+      cpp->sglist[k].address = V2DEV(sgpnt[k].address);
+      cpp->sglist[k].num_bytes = H2DEV(sgpnt[k].length);
+      data_len += sgpnt[k].length;
+      }
+
+   cpp->use_sg = SCpnt->use_sg;
+   cpp->data_address = V2DEV(cpp->sglist);
+   cpp->data_len = H2DEV(data_len);
+}
+
+static inline int do_qcomm(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) {
+   unsigned int i, j, k;
+   struct mscp *cpp;
+
+   static const unsigned char data_out_cmds[] = {
+      0x0a, 0x2a, 0x15, 0x55, 0x04, 0x07, 0x18, 0x1d, 0x24, 0x2e,
+      0x30, 0x31, 0x32, 0x38, 0x39, 0x3a, 0x3b, 0x3d, 0x3f, 0x40,
+      0x41, 0x4c, 0xaa, 0xae, 0xb0, 0xb1, 0xb2, 0xb6, 0xea, 0x1b
+      };
+
+   static const unsigned char data_none_cmds[] = {
+      0x01, 0x0b, 0x10, 0x11, 0x13, 0x16, 0x17, 0x19, 0x2b, 0x1e,
+      0x2c, 0xac, 0x2f, 0xaf, 0x33, 0xb3, 0x35, 0x36, 0x45, 0x47,
+      0x48, 0x49, 0xa9, 0x4b, 0xa5, 0xa6, 0xb5
+      };
+
+   /* j is the board number */
+   j = ((struct hostdata *) SCpnt->host->hostdata)->board_number;
+
+   if (SCpnt->host_scribble)
+      panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
+            BN(j), SCpnt->pid, SCpnt);
+
+   /* i is the mailbox number, look for the first free mailbox
+      starting from last_cp_used */
+   i = HD(j)->last_cp_used + 1;
+
+   for (k = 0; k < sh[j]->can_queue; k++, i++) {
+
+      if (i >= sh[j]->can_queue) i = 0;
+
+      if (HD(j)->cp_stat[i] == FREE) {
+         HD(j)->last_cp_used = i;
+         break;
+         }
+      }
+
+   if (k == sh[j]->can_queue) {
+      printk("%s: qcomm, no free mailbox.\n", BN(j));
+      return 1;
+      }
+
+   /* Set pointer to control packet structure */
+   cpp = &HD(j)->cp[i];
+
+   memset(cpp, 0, sizeof(struct mscp) - sizeof(struct sg_list *));
+   SCpnt->scsi_done = done;
+   cpp->index = i;
+   SCpnt->host_scribble = (unsigned char *) &cpp->index;
+
+   if (do_trace) printk("%s: qcomm, mbox %d, target %d.%d:%d, pid %ld.\n",
+                        BN(j), i, SCpnt->channel, SCpnt->target,
+                        SCpnt->lun, SCpnt->pid);
+
+   cpp->xdir = DTD_IN;
+
+   for (k = 0; k < ARRAY_SIZE(data_out_cmds); k++)
+      if (SCpnt->cmnd[0] == data_out_cmds[k]) {
+         cpp->xdir = DTD_OUT;
+         break;
+         }
+
+   if (cpp->xdir == DTD_IN)
+      for (k = 0; k < ARRAY_SIZE(data_none_cmds); k++)
+         if (SCpnt->cmnd[0] == data_none_cmds[k]) {
+            cpp->xdir = DTD_NONE;
+            break;
+            }
+
+   cpp->opcode = OP_SCSI;
+   cpp->channel = SCpnt->channel;
+   cpp->target = SCpnt->target;
+   cpp->lun = SCpnt->lun;
+   cpp->SCpnt = SCpnt;
+   cpp->sense_addr = V2DEV(SCpnt->sense_buffer);
+   cpp->sense_len = sizeof SCpnt->sense_buffer;
+
+   if (SCpnt->use_sg) {
+      cpp->sg = TRUE;
+      build_sg_list(cpp, SCpnt);
+      }
+   else {
+      cpp->data_address = V2DEV(SCpnt->request_buffer);
+      cpp->data_len = H2DEV(SCpnt->request_bufflen);
+      }
+
+   cpp->scsi_cdbs_len = SCpnt->cmd_len;
+   memcpy(cpp->scsi_cdbs, SCpnt->cmnd, cpp->scsi_cdbs_len);
+
+   if (linked_comm && SCpnt->device->queue_depth > 2
+                                     && TLDEV(SCpnt->device->type)) {
+      HD(j)->cp_stat[i] = READY;
+      flush_dev(SCpnt->device, SCpnt->request.sector, j, FALSE);
+      return 0;
+      }
+
+   if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+      SCpnt->host_scribble = NULL;
+      printk("%s: qcomm, target %d.%d:%d, pid %ld, adapter busy.\n",
+             BN(j), SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->pid);
+      return 1;
+      }
+
+   /* Store pointer in OGM address bytes */
+   outl(V2DEV(cpp), sh[j]->io_port + REG_OGM);
+
+   /* Issue OGM interrupt */
+   outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
+
+   HD(j)->cp_stat[i] = IN_USE;
+   return 0;
+}
+
+int u14_34f_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) {
+   int rtn;
+   IRQ_FLAGS
+
+   IRQ_LOCK_SAVE
+   rtn = do_qcomm(SCpnt, done);
+   IRQ_UNLOCK_RESTORE
+   return rtn;
+}
+
+static inline int do_old_abort(Scsi_Cmnd *SCarg) {
+   unsigned int i, j;
+
+   j = ((struct hostdata *) SCarg->host->hostdata)->board_number;
+
+   if (SCarg->host_scribble == NULL ||
+       (SCarg->serial_number_at_timeout &&
+       (SCarg->serial_number != SCarg->serial_number_at_timeout))) {
+      printk("%s: abort, target %d.%d:%d, pid %ld inactive.\n",
+             BN(j), SCarg->channel, SCarg->target, SCarg->lun, SCarg->pid);
+      return SCSI_ABORT_NOT_RUNNING;
+      }
+
+   i = *(unsigned int *)SCarg->host_scribble;
+   printk("%s: abort, mbox %d, target %d.%d:%d, pid %ld.\n",
+          BN(j), i, SCarg->channel, SCarg->target, SCarg->lun, SCarg->pid);
+
+   if (i >= sh[j]->can_queue)
+      panic("%s: abort, invalid SCarg->host_scribble.\n", BN(j));
+
+   if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+      printk("%s: abort, timeout error.\n", BN(j));
+      return SCSI_ABORT_ERROR;
+      }
+
+   if (HD(j)->cp_stat[i] == FREE) {
+      printk("%s: abort, mbox %d is free.\n", BN(j), i);
+      return SCSI_ABORT_NOT_RUNNING;
+      }
+
+   if (HD(j)->cp_stat[i] == IN_USE) {
+      printk("%s: abort, mbox %d is in use.\n", BN(j), i);
+
+      if (SCarg != HD(j)->cp[i].SCpnt)
+         panic("%s: abort, mbox %d, SCarg %p, cp SCpnt %p.\n",
+               BN(j), i, SCarg, HD(j)->cp[i].SCpnt);
+
+      if (inb(sh[j]->io_port + REG_SYS_INTR) & IRQ_ASSERTED)
+         printk("%s: abort, mbox %d, interrupt pending.\n", BN(j), i);
+
+      return SCSI_ABORT_SNOOZE;
+      }
+
+   if (HD(j)->cp_stat[i] == IN_RESET) {
+      printk("%s: abort, mbox %d is in reset.\n", BN(j), i);
+      return SCSI_ABORT_ERROR;
+      }
+
+   if (HD(j)->cp_stat[i] == LOCKED) {
+      printk("%s: abort, mbox %d is locked.\n", BN(j), i);
+      return SCSI_ABORT_NOT_RUNNING;
+      }
+
+   if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
+      SCarg->result = DID_ABORT << 16;
+      SCarg->host_scribble = NULL;
+      HD(j)->cp_stat[i] = FREE;
+      printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
+             BN(j), i, SCarg->pid);
+      SCarg->scsi_done(SCarg);
+      return SCSI_ABORT_SUCCESS;
+      }
+
+   panic("%s: abort, mbox %d, invalid cp_stat.\n", BN(j), i);
+}
+
+int u14_34f_old_abort(Scsi_Cmnd *SCarg) {
+   int rtn;
+   IRQ_FLAGS
+
+   IRQ_LOCK_SAVE
+   rtn = do_old_abort(SCarg);
+   IRQ_UNLOCK_RESTORE
+   return rtn;
+}
+
+#if LINUX_VERSION_CODE >= LinuxVersionCode(2,1,101)
+
+static inline int do_abort(Scsi_Cmnd *SCarg) {
+   unsigned int i, j;
+
+   j = ((struct hostdata *) SCarg->host->hostdata)->board_number;
+
+   if (SCarg->host_scribble == NULL) {
+      printk("%s: abort, target %d.%d:%d, pid %ld inactive.\n",
+             BN(j), SCarg->channel, SCarg->target, SCarg->lun, SCarg->pid);
+      return SUCCESS;
+      }
+
+   i = *(unsigned int *)SCarg->host_scribble;
+   printk("%s: abort, mbox %d, target %d.%d:%d, pid %ld.\n",
+          BN(j), i, SCarg->channel, SCarg->target, SCarg->lun, SCarg->pid);
+
+   if (i >= sh[j]->can_queue)
+      panic("%s: abort, invalid SCarg->host_scribble.\n", BN(j));
+
+   if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+      printk("%s: abort, timeout error.\n", BN(j));
+      return FAILED;
+      }
+
+   if (HD(j)->cp_stat[i] == FREE) {
+      printk("%s: abort, mbox %d is free.\n", BN(j), i);
+      return SUCCESS;
+      }
+
+   if (HD(j)->cp_stat[i] == IN_USE) {
+      printk("%s: abort, mbox %d is in use.\n", BN(j), i);
+
+      if (SCarg != HD(j)->cp[i].SCpnt)
+         panic("%s: abort, mbox %d, SCarg %p, cp SCpnt %p.\n",
+               BN(j), i, SCarg, HD(j)->cp[i].SCpnt);
+
+      if (inb(sh[j]->io_port + REG_SYS_INTR) & IRQ_ASSERTED)
+         printk("%s: abort, mbox %d, interrupt pending.\n", BN(j), i);
+
+      if (SCarg->eh_state == SCSI_STATE_TIMEOUT) {
+         SCarg->host_scribble = NULL;
+         HD(j)->cp_stat[i] = FREE;
+         printk("%s, abort, mbox %d, eh_state timeout, pid %ld.\n",
+                BN(j), i, SCarg->pid);
+         return SUCCESS;
+         }
+
+      return FAILED;
+      }
+
+   if (HD(j)->cp_stat[i] == IN_RESET) {
+      printk("%s: abort, mbox %d is in reset.\n", BN(j), i);
+      return FAILED;
+      }
+
+   if (HD(j)->cp_stat[i] == LOCKED) {
+      printk("%s: abort, mbox %d is locked.\n", BN(j), i);
+      return SUCCESS;
+      }
+
+   if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
+      SCarg->result = DID_ABORT << 16;
+      SCarg->host_scribble = NULL;
+      HD(j)->cp_stat[i] = FREE;
+      printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
+             BN(j), i, SCarg->pid);
+      SCarg->scsi_done(SCarg);
+      return SUCCESS;
+      }
+
+   panic("%s: abort, mbox %d, invalid cp_stat.\n", BN(j), i);
+}
+
+int u14_34f_abort(Scsi_Cmnd *SCarg) {
+
+   return do_abort(SCarg);
+}
+
+#endif /* new_eh_code */
+
+static inline int do_old_reset(Scsi_Cmnd *SCarg) {
+   unsigned int i, j, time, k, c, limit = 0;
+   int arg_done = FALSE;
+   Scsi_Cmnd *SCpnt;
+
+   j = ((struct hostdata *) SCarg->host->hostdata)->board_number;
+   printk("%s: reset, enter, target %d.%d:%d, pid %ld.\n",
+          BN(j), SCarg->channel, SCarg->target, SCarg->lun, SCarg->pid);
+
+   if (SCarg->host_scribble == NULL)
+      printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->pid);
+
+   if (SCarg->serial_number_at_timeout &&
+       (SCarg->serial_number != SCarg->serial_number_at_timeout)) {
+      printk("%s: reset, pid %ld, reset not running.\n", BN(j), SCarg->pid);
+      return SCSI_RESET_NOT_RUNNING;
+      }
+
+   if (HD(j)->in_reset) {
+      printk("%s: reset, exit, already in reset.\n", BN(j));
+      return SCSI_RESET_ERROR;
+      }
+
+   if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+      printk("%s: reset, exit, timeout error.\n", BN(j));
+      return SCSI_RESET_ERROR;
+      }
+
+   HD(j)->retries = 0;
+
+   for (c = 0; c <= sh[j]->max_channel; c++)
+      for (k = 0; k < sh[j]->max_id; k++) {
+         HD(j)->target_redo[k][c] = TRUE;
+         HD(j)->target_to[k][c] = 0;
+         }
+
+   for (i = 0; i < sh[j]->can_queue; i++) {
+
+      if (HD(j)->cp_stat[i] == FREE) continue;
+
+      if (HD(j)->cp_stat[i] == LOCKED) {
+         HD(j)->cp_stat[i] = FREE;
+         printk("%s: reset, locked mbox %d forced free.\n", BN(j), i);
+         continue;
+         }
+
+      if (!(SCpnt = HD(j)->cp[i].SCpnt))
+         panic("%s: reset, mbox %d, SCpnt == NULL.\n", BN(j), i);
+
+      if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
+         HD(j)->cp_stat[i] = ABORTING;
+         printk("%s: reset, mbox %d aborting, pid %ld.\n",
+                BN(j), i, SCpnt->pid);
+         }
+
+      else {
+         HD(j)->cp_stat[i] = IN_RESET;
+         printk("%s: reset, mbox %d in reset, pid %ld.\n",
+                BN(j), i, SCpnt->pid);
+         }
+
+      if (SCpnt->host_scribble == NULL)
+         panic("%s: reset, mbox %d, garbled SCpnt.\n", BN(j), i);
+
+      if (*(unsigned int *)SCpnt->host_scribble != i)
+         panic("%s: reset, mbox %d, index mismatch.\n", BN(j), i);
+
+      if (SCpnt->scsi_done == NULL)
+         panic("%s: reset, mbox %d, SCpnt->scsi_done == NULL.\n", BN(j), i);
+
+      if (SCpnt == SCarg) arg_done = TRUE;
+      }
+
+   if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+      printk("%s: reset, cannot reset, timeout error.\n", BN(j));
+      return SCSI_RESET_ERROR;
+      }
+
+   outb(CMD_RESET, sh[j]->io_port + REG_LCL_INTR);
+   printk("%s: reset, board reset done, enabling interrupts.\n", BN(j));
+
+#if defined(DEBUG_RESET)
+   do_trace = TRUE;
+#endif
+
+   HD(j)->in_reset = TRUE;
+   SPIN_UNLOCK
+   IRQ_UNLOCK
+   time = jiffies;
+   while ((jiffies - time) < (10 * HZ) && limit++ < 200000) udelay(100L);
+   IRQ_LOCK
+   SPIN_LOCK
+   printk("%s: reset, interrupts disabled, loops %d.\n", BN(j), limit);
+
+   for (i = 0; i < sh[j]->can_queue; i++) {
+
+      if (HD(j)->cp_stat[i] == IN_RESET) {
+         SCpnt = HD(j)->cp[i].SCpnt;
+         SCpnt->result = DID_RESET << 16;
+         SCpnt->host_scribble = NULL;
+
+         /* This mailbox is still waiting for its interrupt */
+         HD(j)->cp_stat[i] = LOCKED;
+
+         printk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
+                BN(j), i, SCpnt->pid);
+         }
+
+      else if (HD(j)->cp_stat[i] == ABORTING) {
+         SCpnt = HD(j)->cp[i].SCpnt;
+         SCpnt->result = DID_RESET << 16;
+         SCpnt->host_scribble = NULL;
+
+         /* This mailbox was never queued to the adapter */
+         HD(j)->cp_stat[i] = FREE;
+
+         printk("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
+                BN(j), i, SCpnt->pid);
+         }
+
+      else
+
+         /* Any other mailbox has already been set free by interrupt */
+         continue;
+
+      SCpnt->scsi_done(SCpnt);
+      IRQ_LOCK
+      }
+
+   HD(j)->in_reset = FALSE;
+   do_trace = FALSE;
+
+   if (arg_done) {
+      printk("%s: reset, exit, success.\n", BN(j));
+      return SCSI_RESET_SUCCESS;
+      }
+   else {
+      printk("%s: reset, exit, wakeup.\n", BN(j));
+      return SCSI_RESET_PUNT;
+      }
+}
+
+int u14_34f_old_reset(Scsi_Cmnd *SCarg, unsigned int reset_flags) {
+   int rtn;
+   IRQ_FLAGS
+
+   IRQ_LOCK_SAVE
+   rtn = do_old_reset(SCarg);
+   IRQ_UNLOCK_RESTORE
+   return rtn;
+}
+
+#if LINUX_VERSION_CODE >= LinuxVersionCode(2,1,101)
+
+static inline int do_reset(Scsi_Cmnd *SCarg) {
+   unsigned int i, j, time, k, c, limit = 0;
+   int arg_done = FALSE;
+   Scsi_Cmnd *SCpnt;
+
+   j = ((struct hostdata *) SCarg->host->hostdata)->board_number;
+   printk("%s: reset, enter, target %d.%d:%d, pid %ld.\n",
+          BN(j), SCarg->channel, SCarg->target, SCarg->lun, SCarg->pid);
+
+   if (SCarg->host_scribble == NULL)
+      printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->pid);
+
+   if (HD(j)->in_reset) {
+      printk("%s: reset, exit, already in reset.\n", BN(j));
+      return FAILED;
+      }
+
+   if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+      printk("%s: reset, exit, timeout error.\n", BN(j));
+      return FAILED;
+      }
+
+   HD(j)->retries = 0;
+
+   for (c = 0; c <= sh[j]->max_channel; c++)
+      for (k = 0; k < sh[j]->max_id; k++) {
+         HD(j)->target_redo[k][c] = TRUE;
+         HD(j)->target_to[k][c] = 0;
+         }
+
+   for (i = 0; i < sh[j]->can_queue; i++) {
+
+      if (HD(j)->cp_stat[i] == FREE) continue;
+
+      if (HD(j)->cp_stat[i] == LOCKED) {
+         HD(j)->cp_stat[i] = FREE;
+         printk("%s: reset, locked mbox %d forced free.\n", BN(j), i);
+         continue;
+         }
+
+      if (!(SCpnt = HD(j)->cp[i].SCpnt))
+         panic("%s: reset, mbox %d, SCpnt == NULL.\n", BN(j), i);
+
+      if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
+         HD(j)->cp_stat[i] = ABORTING;
+         printk("%s: reset, mbox %d aborting, pid %ld.\n",
+                BN(j), i, SCpnt->pid);
+         }
+
+      else {
+         HD(j)->cp_stat[i] = IN_RESET;
+         printk("%s: reset, mbox %d in reset, pid %ld.\n",
+                BN(j), i, SCpnt->pid);
+         }
+
+      if (SCpnt->host_scribble == NULL)
+         panic("%s: reset, mbox %d, garbled SCpnt.\n", BN(j), i);
+
+      if (*(unsigned int *)SCpnt->host_scribble != i)
+         panic("%s: reset, mbox %d, index mismatch.\n", BN(j), i);
+
+      if (SCpnt->scsi_done == NULL)
+         panic("%s: reset, mbox %d, SCpnt->scsi_done == NULL.\n", BN(j), i);
+
+      if (SCpnt == SCarg) arg_done = TRUE;
+      }
+
+   if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+      printk("%s: reset, cannot reset, timeout error.\n", BN(j));
+      return FAILED;
+      }
+
+   outb(CMD_RESET, sh[j]->io_port + REG_LCL_INTR);
+   printk("%s: reset, board reset done, enabling interrupts.\n", BN(j));
+
+#if defined(DEBUG_RESET)
+   do_trace = TRUE;
+#endif
+
+   HD(j)->in_reset = TRUE;
+   SPIN_UNLOCK
+   IRQ_UNLOCK
+   time = jiffies;
+   while ((jiffies - time) < (10 * HZ) && limit++ < 200000) udelay(100L);
+   IRQ_LOCK
+   SPIN_LOCK
+   printk("%s: reset, interrupts disabled, loops %d.\n", BN(j), limit);
+
+   for (i = 0; i < sh[j]->can_queue; i++) {
+
+      if (HD(j)->cp_stat[i] == IN_RESET) {
+         SCpnt = HD(j)->cp[i].SCpnt;
+         SCpnt->result = DID_RESET << 16;
+         SCpnt->host_scribble = NULL;
+
+         /* This mailbox is still waiting for its interrupt */
+         HD(j)->cp_stat[i] = LOCKED;
+
+         printk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
+                BN(j), i, SCpnt->pid);
+         }
+
+      else if (HD(j)->cp_stat[i] == ABORTING) {
+         SCpnt = HD(j)->cp[i].SCpnt;
+         SCpnt->result = DID_RESET << 16;
+         SCpnt->host_scribble = NULL;
+
+         /* This mailbox was never queued to the adapter */
+         HD(j)->cp_stat[i] = FREE;
+
+         printk("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
+                BN(j), i, SCpnt->pid);
+         }
+
+      else
+
+         /* Any other mailbox has already been set free by interrupt */
+         continue;
+
+      SCpnt->scsi_done(SCpnt);
+      IRQ_LOCK
+      }
+
+   HD(j)->in_reset = FALSE;
+   do_trace = FALSE;
+
+   if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->pid);
+   else          printk("%s: reset, exit.\n", BN(j));
+
+   return SUCCESS;
+}
+
+int u14_34f_reset(Scsi_Cmnd *SCarg) {
+
+   return do_reset(SCarg);
+}
+
+#endif /* new_eh_code */
+
+int u14_34f_biosparam(Disk *disk, kdev_t dev, int *dkinfo) {
+   unsigned int j = 0;
+   int size = disk->capacity;
+
+   dkinfo[0] = HD(j)->heads;
+   dkinfo[1] = HD(j)->sectors;
+   dkinfo[2] = size / (HD(j)->heads * HD(j)->sectors);
+
+   if (ext_tran && (scsicam_bios_param(disk, dev, dkinfo) < 0)) {
+      dkinfo[0] = 255;
+      dkinfo[1] = 63;
+      dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);
+      }
+
+#if defined (DEBUG_GEOMETRY)
+   printk ("%s: biosparam, head=%d, sec=%d, cyl=%d.\n", driver_name,
+           dkinfo[0], dkinfo[1], dkinfo[2]);
+#endif
+
+   return FALSE;
+}
+
+static void sort(unsigned long sk[], unsigned int da[], unsigned int n,
+                 unsigned int rev) {
+   unsigned int i, j, k, y;
+   unsigned long x;
+
+   for (i = 0; i < n - 1; i++) {
+      k = i;
+
+      for (j = k + 1; j < n; j++)
+         if (rev) {
+            if (sk[j] > sk[k]) k = j;
+            }
+         else {
+            if (sk[j] < sk[k]) k = j;
+            }
+
+      if (k != i) {
+         x = sk[k]; sk[k] = sk[i]; sk[i] = x;
+         y = da[k]; da[k] = da[i]; da[i] = y;
+         }
+      }
+
+   return;
+   }
+
+static inline int reorder(unsigned int j, unsigned long cursec,
+                 unsigned int ihdlr, unsigned int il[], unsigned int n_ready) {
+   Scsi_Cmnd *SCpnt;
+   struct mscp *cpp;
+   unsigned int k, n;
+   unsigned int rev = FALSE, s = TRUE, r = TRUE;
+   unsigned int input_only = TRUE, overlap = FALSE;
+   unsigned long sl[n_ready], pl[n_ready], ll[n_ready];
+   unsigned long maxsec = 0, minsec = ULONG_MAX, seek = 0, iseek = 0;
+   unsigned long ioseek = 0;
+
+   static unsigned int flushcount = 0, batchcount = 0, sortcount = 0;
+   static unsigned int readycount = 0, ovlcount = 0, inputcount = 0;
+   static unsigned int readysorted = 0, revcount = 0;
+   static unsigned long seeksorted = 0, seeknosort = 0;
+
+   if (link_statistics && !(++flushcount % link_statistics))
+      printk("fc %d bc %d ic %d oc %d rc %d rs %d sc %d re %d"\
+             " av %ldK as %ldK.\n", flushcount, batchcount, inputcount,
+             ovlcount, readycount, readysorted, sortcount, revcount,
+             seeknosort / (readycount + 1),
+             seeksorted / (readycount + 1));
+
+   if (n_ready <= 1) return FALSE;
+
+   for (n = 0; n < n_ready; n++) {
+      k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+
+      if (!(cpp->xdir == DTD_IN)) input_only = FALSE;
+
+      if (SCpnt->request.sector < minsec) minsec = SCpnt->request.sector;
+      if (SCpnt->request.sector > maxsec) maxsec = SCpnt->request.sector;
+
+      sl[n] = SCpnt->request.sector;
+      ioseek += SCpnt->request.nr_sectors;
+
+      if (!n) continue;
+
+      if (sl[n] < sl[n - 1]) s = FALSE;
+      if (sl[n] > sl[n - 1]) r = FALSE;
+
+      if (link_statistics) {
+         if (sl[n] > sl[n - 1])
+            seek += sl[n] - sl[n - 1];
+         else
+            seek += sl[n - 1] - sl[n];
+         }
+
+      }
+
+   if (link_statistics) {
+      if (cursec > sl[0]) seek += cursec - sl[0]; else seek += sl[0] - cursec;
+      }
+
+   if (cursec > ((maxsec + minsec) / 2)) rev = TRUE;
+
+   if (ioseek > ((maxsec - minsec) / 2)) rev = FALSE;
+
+   if (!((rev && r) || (!rev && s))) sort(sl, il, n_ready, rev);
+
+   if (!input_only) for (n = 0; n < n_ready; n++) {
+      k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+      ll[n] = SCpnt->request.nr_sectors; pl[n] = SCpnt->pid;
+
+      if (!n) continue;
+
+      if ((sl[n] == sl[n - 1]) || (!rev && ((sl[n - 1] + ll[n - 1]) > sl[n]))
+          || (rev && ((sl[n] + ll[n]) > sl[n - 1]))) overlap = TRUE;
+      }
+
+   if (overlap) sort(pl, il, n_ready, FALSE);
+
+   if (link_statistics) {
+      if (cursec > sl[0]) iseek = cursec - sl[0]; else iseek = sl[0] - cursec;
+      batchcount++; readycount += n_ready, seeknosort += seek / 1024;
+      if (input_only) inputcount++;
+      if (overlap) { ovlcount++; seeksorted += iseek / 1024; }
+      else seeksorted += (iseek + maxsec - minsec) / 1024;
+      if (rev && !r)     {  revcount++; readysorted += n_ready; }
+      if (!rev && !s)    { sortcount++; readysorted += n_ready; }
+      }
+
+#if defined(DEBUG_LINKED_COMMANDS)
+   if (link_statistics && (overlap || !(flushcount % link_statistics)))
+      for (n = 0; n < n_ready; n++) {
+         k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+         printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\
+                " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
+                (ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
+                SCpnt->lun, SCpnt->pid, k, flushcount, n_ready,
+                SCpnt->request.sector, SCpnt->request.nr_sectors, cursec,
+                YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
+                YESNO(overlap), cpp->xdir);
+         }
+#endif
+   return overlap;
+}
+
+static void flush_dev(Scsi_Device *dev, unsigned long cursec, unsigned int j,
+                      unsigned int ihdlr) {
+   Scsi_Cmnd *SCpnt;
+   struct mscp *cpp;
+   unsigned int k, n, n_ready = 0, il[MAX_MAILBOXES];
+
+   for (k = 0; k < sh[j]->can_queue; k++) {
+
+      if (HD(j)->cp_stat[k] != READY && HD(j)->cp_stat[k] != IN_USE) continue;
+
+      cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+
+      if (SCpnt->device != dev) continue;
+
+      if (HD(j)->cp_stat[k] == IN_USE) return;
+
+      il[n_ready++] = k;
+      }
+
+   if (reorder(j, cursec, ihdlr, il, n_ready)) n_ready = 1;
+
+   for (n = 0; n < n_ready; n++) {
+      k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
+
+      if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
+         printk("%s: %s, target %d.%d:%d, pid %ld, mbox %d, adapter"\
+                " busy, will abort.\n", BN(j), (ihdlr ? "ihdlr" : "qcomm"),
+                SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->pid, k);
+         HD(j)->cp_stat[k] = ABORTING;
+         continue;
+         }
+
+      outl(V2DEV(cpp), sh[j]->io_port + REG_OGM);
+      outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
+      HD(j)->cp_stat[k] = IN_USE;
+      }
+
+}
+
+static inline void ihdlr(int irq, unsigned int j) {
+   Scsi_Cmnd *SCpnt;
+   unsigned int i, k, c, status, tstatus, reg, ret;
+   struct mscp *spp, *cpp;
+
+   if (sh[j]->irq != irq)
+       panic("%s: ihdlr, irq %d, sh[j]->irq %d.\n", BN(j), irq, sh[j]->irq);
+
+   /* Check if this board need to be serviced */
+   if (!((reg = inb(sh[j]->io_port + REG_SYS_INTR)) & IRQ_ASSERTED)) return;
+
+   HD(j)->iocount++;
+
+   if (do_trace) printk("%s: ihdlr, enter, irq %d, count %d.\n", BN(j), irq,
+                        HD(j)->iocount);
+
+   /* Check if this board is still busy */
+   if (wait_on_busy(sh[j]->io_port, 20 * MAXLOOP)) {
+      outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
+      printk("%s: ihdlr, busy timeout error,  irq %d, reg 0x%x, count %d.\n",
+             BN(j), irq, reg, HD(j)->iocount);
+      return;
+      }
+
+   spp = (struct mscp *)DEV2V(ret = inl(sh[j]->io_port + REG_ICM));
+   cpp = spp;
+
+   /* Clear interrupt pending flag */
+   outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
+
+#if defined(DEBUG_GENERATE_ABORTS)
+   if ((HD(j)->iocount > 500) && ((HD(j)->iocount % 500) < 3)) return;
+#endif
+
+   /* Find the mailbox to be serviced on this board */
+   i = cpp - HD(j)->cp;
+
+   if (cpp < HD(j)->cp || cpp >= HD(j)->cp + sh[j]->can_queue
+                                     || i >= sh[j]->can_queue)
+      panic("%s: ihdlr, invalid mscp bus address %p, cp0 %p.\n", BN(j),
+            (void *)ret, HD(j)->cp);
+
+   if (HD(j)->cp_stat[i] == IGNORE) {
+      HD(j)->cp_stat[i] = FREE;
+      return;
+      }
+   else if (HD(j)->cp_stat[i] == LOCKED) {
+      HD(j)->cp_stat[i] = FREE;
+      printk("%s: ihdlr, mbox %d unlocked, count %d.\n", BN(j), i,
+             HD(j)->iocount);
+      return;
+      }
+   else if (HD(j)->cp_stat[i] == FREE) {
+      printk("%s: ihdlr, mbox %d is free, count %d.\n", BN(j), i,
+             HD(j)->iocount);
+      return;
+      }
+   else if (HD(j)->cp_stat[i] == IN_RESET)
+      printk("%s: ihdlr, mbox %d is in reset.\n", BN(j), i);
+   else if (HD(j)->cp_stat[i] != IN_USE)
+      panic("%s: ihdlr, mbox %d, invalid cp_stat: %d.\n",
+            BN(j), i, HD(j)->cp_stat[i]);
+
+   HD(j)->cp_stat[i] = FREE;
+   SCpnt = cpp->SCpnt;
+
+   if (SCpnt == NULL) panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", BN(j), i);
+
+   if (SCpnt->host_scribble == NULL)
+      panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", BN(j), i,
+            SCpnt->pid, SCpnt);
+
+   if (*(unsigned int *)SCpnt->host_scribble != i)
+      panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
+            BN(j), i, SCpnt->pid, *(unsigned int *)SCpnt->host_scribble);
+
+   if (linked_comm && SCpnt->device->queue_depth > 2
+                                     && TLDEV(SCpnt->device->type))
+      flush_dev(SCpnt->device, SCpnt->request.sector, j, TRUE);
+
+   tstatus = status_byte(spp->target_status);
+
+#if defined(DEBUG_GENERATE_ERRORS)
+   if ((HD(j)->iocount > 500) && ((HD(j)->iocount % 200) < 2))
+                                           spp->adapter_status = 0x01;
+#endif
+
+   switch (spp->adapter_status) {
+      case ASOK:     /* status OK */
+
+         /* Forces a reset if a disk drive keeps returning BUSY */
+         if (tstatus == BUSY && SCpnt->device->type != TYPE_TAPE)
+            status = DID_ERROR << 16;
+
+         /* If there was a bus reset, redo operation on each target */
+         else if (tstatus != GOOD && SCpnt->device->type == TYPE_DISK
+                  && HD(j)->target_redo[SCpnt->target][SCpnt->channel])
+            status = DID_BUS_BUSY << 16;
+
+         /* Works around a flaw in scsi.c */
+         else if (tstatus == CHECK_CONDITION
+                  && SCpnt->device->type == TYPE_DISK
+                  && (SCpnt->sense_buffer[2] & 0xf) == RECOVERED_ERROR)
+            status = DID_BUS_BUSY << 16;
+
+         else
+            status = DID_OK << 16;
+
+         if (tstatus == GOOD)
+            HD(j)->target_redo[SCpnt->target][SCpnt->channel] = FALSE;
+
+         if (spp->target_status && SCpnt->device->type == TYPE_DISK)
+            printk("%s: ihdlr, target %d.%d:%d, pid %ld, "\
+                   "target_status 0x%x, sense key 0x%x.\n", BN(j),
+                   SCpnt->channel, SCpnt->target, SCpnt->lun,
+                   SCpnt->pid, spp->target_status,
+                   SCpnt->sense_buffer[2]);
+
+         HD(j)->target_to[SCpnt->target][SCpnt->channel] = 0;
+
+         if (HD(j)->last_retried_pid == SCpnt->pid) HD(j)->retries = 0;
+
+         break;
+      case ASST:     /* Selection Time Out */
+
+         if (HD(j)->target_to[SCpnt->target][SCpnt->channel] > 1)
+            status = DID_ERROR << 16;
+         else {
+            status = DID_TIME_OUT << 16;
+            HD(j)->target_to[SCpnt->target][SCpnt->channel]++;
+            }
+
+         break;
+
+      /* Perform a limited number of internal retries */
+      case 0x93:     /* Unexpected bus free */
+      case 0x94:     /* Target bus phase sequence failure */
+      case 0x96:     /* Illegal SCSI command */
+      case 0xa3:     /* SCSI bus reset error */
+
+         for (c = 0; c <= sh[j]->max_channel; c++)
+            for (k = 0; k < sh[j]->max_id; k++)
+               HD(j)->target_redo[k][c] = TRUE;
+
+
+      case 0x92:     /* Data over/under-run */
+
+         if (SCpnt->device->type != TYPE_TAPE
+             && HD(j)->retries < MAX_INTERNAL_RETRIES) {
+
+#if defined(DID_SOFT_ERROR)
+            status = DID_SOFT_ERROR << 16;
+#else
+            status = DID_BUS_BUSY << 16;
+#endif
+
+            HD(j)->retries++;
+            HD(j)->last_retried_pid = SCpnt->pid;
+            }
+         else
+            status = DID_ERROR << 16;
+
+         break;
+      case 0x01:     /* Invalid command */
+      case 0x02:     /* Invalid parameters */
+      case 0x03:     /* Invalid data list */
+      case 0x84:     /* SCSI bus abort error */
+      case 0x9b:     /* Auto request sense error */
+      case 0x9f:     /* Unexpected command complete message error */
+      case 0xff:     /* Invalid parameter in the S/G list */
+      default:
+         status = DID_ERROR << 16;
+         break;
+      }
+
+   SCpnt->result = status | spp->target_status;
+
+#if defined(DEBUG_INTERRUPT)
+   if (SCpnt->result || do_trace)
+#else
+   if ((spp->adapter_status != ASOK && HD(j)->iocount >  1000) ||
+       (spp->adapter_status != ASOK &&
+        spp->adapter_status != ASST && HD(j)->iocount <= 1000) ||
+        do_trace || msg_byte(spp->target_status))
+#endif
+      printk("%s: ihdlr, mbox %2d, err 0x%x:%x,"\
+             " target %d.%d:%d, pid %ld, reg 0x%x, count %d.\n",
+             BN(j), i, spp->adapter_status, spp->target_status,
+             SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->pid,
+             reg, HD(j)->iocount);
+
+   /* Set the command state to inactive */
+   SCpnt->host_scribble = NULL;
+
+   SCpnt->scsi_done(SCpnt);
+
+   if (do_trace) printk("%s: ihdlr, exit, irq %d, count %d.\n", BN(j), irq,
+                        HD(j)->iocount);
+
+   return;
+}
+
+static void do_interrupt_handler(int irq, void *shap, struct pt_regs *regs) {
+   unsigned int j;
+   IRQ_FLAGS
+   SPIN_FLAGS
+
+   /* Check if the interrupt must be processed by this handler */
+   if ((j = (unsigned int)((char *)shap - sha)) >= num_boards) return;
+
+   SPIN_LOCK_SAVE
+   IRQ_LOCK_SAVE
+   ihdlr(irq, j);
+   IRQ_UNLOCK_RESTORE
+   SPIN_UNLOCK_RESTORE
+}
+
+int u14_34f_release(struct Scsi_Host *shpnt) {
+   unsigned int i, j;
+   IRQ_FLAGS
+
+   IRQ_LOCK_SAVE
+
+   for (j = 0; sh[j] != NULL && sh[j] != shpnt; j++);
+
+   if (sh[j] == NULL) panic("%s: release, invalid Scsi_Host pointer.\n",
+                            driver_name);
+
+   for (i = 0; i < sh[j]->can_queue; i++)
+      if ((&HD(j)->cp[i])->sglist) kfree((&HD(j)->cp[i])->sglist);
+
+   free_irq(sh[j]->irq, &sha[j]);
+
+   if (sh[j]->dma_channel != NO_DMA) free_dma(sh[j]->dma_channel);
+
+   release_region(sh[j]->io_port, sh[j]->n_io_port);
+   scsi_unregister(sh[j]);
+   IRQ_UNLOCK_RESTORE
+   return FALSE;
+}
+
+#if defined(MODULE)
+Scsi_Host_Template driver_template = ULTRASTOR_14_34F;
+
+#include "scsi_module.c"
+#endif