1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 116 insertions, 0 deletions

diff --git a/linux/src/drivers/scsi/eata_pio.h b/linux/src/drivers/scsi/eata_pio.h
new file mode 100644
index 0000000..333f7c4
--- /dev/null
+++ b/linux/src/drivers/scsi/eata_pio.h
@@ -0,0 +1,116 @@
+/********************************************************
+* Header file for eata_pio.c Linux EATA-PIO SCSI driver *
+* (c) 1993-96 Michael Neuffer  	                        *
+*********************************************************
+* last change: 96/05/05					*
+********************************************************/
+
+
+#ifndef _EATA_PIO_H
+#define _EATA_PIO_H
+
+#include <linux/blk.h>
+#include "scsi.h"
+#include "hosts.h"
+#include <scsi/scsicam.h>
+
+#ifndef HOSTS_C
+#include "eata_generic.h"
+
+#define VER_MAJOR 0
+#define VER_MINOR 0
+#define VER_SUB	  "1b"
+
+/************************************************************************
+ * Here you can switch parts of the code on and of			*
+ ************************************************************************/
+
+#define VERBOSE_SETUP			/* show startup screen of 2001 */
+#define ALLOW_DMA_BOARDS 1
+
+/************************************************************************
+ * Debug options.							* 
+ * Enable DEBUG and whichever options you require.			*
+ ************************************************************************/
+#define DEBUG_EATA	1   /* Enable debug code.			*/
+#define DPT_DEBUG	0   /* Bobs special				*/
+#define DBG_DELAY	0   /* Build in delays so debug messages can be
+                             * be read before they vanish of the top of
+                             * the screen!
+                             */
+#define DBG_PROBE	0   /* Debug probe routines.			*/
+#define DBG_ISA		0   /* Trace ISA routines			*/ 
+#define DBG_EISA	0   /* Trace EISA routines			*/ 
+#define DBG_PCI		0   /* Trace PCI routines			*/ 
+#define DBG_PIO		0   /* Trace get_config_PIO			*/
+#define DBG_COM		0   /* Trace command call			*/
+#define DBG_QUEUE	0   /* Trace command queueing.			*/
+#define DBG_INTR	0   /* Trace interrupt service routine.		*/
+#define DBG_INTR2	0   /* Trace interrupt service routine.		*/
+#define DBG_PROC	0   /* Debug proc-fs related statistics		*/
+#define DBG_PROC_WRITE	0
+#define DBG_REGISTER	0   /* */
+#define DBG_ABNORM	1   /* Debug abnormal actions (reset, abort)	*/
+
+#if DEBUG_EATA 
+#define DBG(x, y)   if ((x)) {y;} 
+#else
+#define DBG(x, y)
+#endif
+
+#endif /* !HOSTS_C */
+
+int eata_pio_detect(Scsi_Host_Template *);
+const char *eata_pio_info(struct Scsi_Host *);
+int eata_pio_command(Scsi_Cmnd *);
+int eata_pio_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+int eata_pio_abort(Scsi_Cmnd *);
+int eata_pio_reset(Scsi_Cmnd *, unsigned int);
+int eata_pio_proc_info(char *, char **, off_t, int, int, int);
+#ifdef MODULE
+int eata_pio_release(struct Scsi_Host *);
+#else
+#define eata_pio_release NULL  
+#endif
+
+
+#define EATA_PIO {	         \
+    NULL, NULL,                  \
+    NULL,               /* proc_dir_entry */ \
+    eata_pio_proc_info, /* procinfo	  */ \
+    "EATA (Extended Attachment) PIO driver", \
+    eata_pio_detect,		 \
+    eata_pio_release,		 \
+    NULL, NULL,			 \
+    eata_pio_queue,		 \
+    eata_pio_abort,		 \
+    eata_pio_reset,		 \
+    NULL,   /* Slave attach */	 \
+    scsicam_bios_param,		 \
+    0,	    /* Canqueue	    */	 \
+    0,	    /* this_id	    */	 \
+    0,	    /* sg_tablesize */	 \
+    0,	    /* cmd_per_lun  */	 \
+    0,	    /* present	    */	 \
+    1,	    /* True if ISA  */	 \
+    ENABLE_CLUSTERING }
+
+#endif /* _EATA_PIO_H */
+
+/*
+ * Overrides for Emacs so that we almost follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * tab-width: 8
+ * End:
+ */