2006-01-22 Thomas Schwinge <tschwinge@gnu.org>

* configure, i386/configure, i386/linux/configure, linux/configure,
	i386/linux/device-drivers.h.in: Regenerated.

	* linux/src/drivers/net/ne2k-pci.c: Resolve conflicts.

2006-01-22  Guillem Jover  <guillem@hadrons.org>

	* i386/linux/configure.ac: Renamed winbond-840 driver to winbond_840.
	Enable the starfire, intel_gige and natsemi network drivers.  Remove
	"CONFIG_" from cb_chim, starfire, sundance, winbond840, hamachi,
	natsemi, myson803 and ns820 driver declarations.  Replace INTER_GIGE
	with INTEL_GIGE.
	* linux/dev/drivers/net/Space.c: Add conditional probes for natsemi,
	ns820, winbond840, hamachi, sundance, starfire, myson803 and intel-gige
	drivers.

	* linux/src/include/asm-i386/cache.h: New file from linux 2.2.26.
	* linux/dev/include/linux/malloc.h: Include <asm/cache.h>.

	* linux/src/drivers/net/ns820.c (netsami_drv_id): Renamed to ...
	(ns820_drv_id): ... this.  Fix all callers.
	* linux/src/drivers/net/intel-gige.c
	(skel_netdev_probe): Renamed to ...
	(igige_probe): ... this.
	* linux/dev/drivers/net/eepro100.c: Remove obsoleted file.
	* linux/src/drivers/net/eepro100.c (pci_id_tbl): Add PCI ID's from
	linux-2.6.14-rc4.

2006-01-22  Alfred M. Szmidt  <ams@gnu.org>

	* i386/linux/configure.ac: Added `pci-scan.o' to the network driver
	class.  (ns820, myson803, sundance, winbond-840, hamachi): New drivers.
	* i386/linux/Makefile.in (linux-net-files): Added `cb_shim.c',
	`hamachi.c', `intel-gige.c', `myson803.c', `natsemi.c', `ns820.c',
	`starfire.c', `sundance.c', `winbond-840.c' and `pci-scan.c'.

	* linux/dev/include/linux/modversions.h: New file.

	* linux/src/drivers/net/cb_shim.c, linux/src/drivers/net/hamachi.c,
	linux/src/drivers/net/intel-gige.c, linux/src/drivers/net/myson803.c,
	linux/src/drivers/net/natsemi.c, linux/src/drivers/net/ns820.c,
	linux/src/drivers/net/starfire.c, linux/src/drivers/net/sundance.c,
	linux/src/drivers/net/winbond-840.c,
	linux/src/drivers/net/kern_compat.h, linux/src/drivers/net/pci-scan.c,
	linux/src/drivers/net/pci-scan.h: New files from netdrivers 3.5 package
	(http://www.scyld.com/network).

	* linux/src/drivers/net/3c59x.c, linux/src/drivers/net/eepro100.c,
	linux/src/drivers/net/epic100.c, linux/src/drivers/net/ne2k-pci.c,
	linux/src/drivers/net/rtl8139.c, linux/src/drivers/net/tulip.c,
	linux/src/drivers/net/via-rhine.c, linux/src/drivers/net/yellowfin.c:
	Updated files from netdrivers 3.5 (http://www.scyld.com/network).

1 files changed, 1558 insertions, 0 deletions

diff --git a/linux/src/drivers/net/winbond-840.c b/linux/src/drivers/net/winbond-840.c
new file mode 100644
index 0000000..556d8ad
--- /dev/null
+++ b/linux/src/drivers/net/winbond-840.c
@@ -0,0 +1,1558 @@
+/* winbond-840.c: A Linux network device driver for the Winbond W89c840. */
+/*
+	Written 1998-2003 by Donald Becker.
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	914 Bay Ridge Road, Suite 220
+	Annapolis MD 21403
+
+	Support information and updates available at
+		http://www.scyld.com/network/drivers.html
+	The information and support mailing lists are based at
+		http://www.scyld.com/mailman/listinfo/
+
+	Do not remove the copyright infomation.
+	Do not change the version information unless an improvement has been made.
+	Merely removing my name, as Compex has done in the past, does not count
+	as an improvement.
+*/
+
+/* These identify the driver base version and may not be removed. */
+static const char version1[] =
+"winbond-840.c:v1.10 7/22/2003  Donald Becker <becker@scyld.com>\n";
+static const char version2[] =
+"  http://www.scyld.com/network/drivers.html\n";
+
+/* Automatically extracted configuration info:
+probe-func: winbond840_probe
+config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840
+
+c-help-name: Winbond W89c840 PCI Ethernet support
+c-help-symbol: CONFIG_WINBOND_840
+c-help: The winbond-840.c driver is for the Winbond W89c840 chip.
+c-help: This chip is named TX9882 on the Compex RL100-ATX board.
+c-help: More specific information and updates are available from
+c-help: http://www.scyld.com/network/drivers.html
+*/
+
+/* The user-configurable values.
+   These may be modified when a driver module is loaded.*/
+
+/* Message enable level: 0..31 = no..all messages.  See NETIF_MSG docs. */
+static int debug = 2;
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+   The '840 uses a 64 element hash table based on the Ethernet CRC.  */
+static int multicast_filter_limit = 32;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1518 effectively disables this feature. */
+static int rx_copybreak = 0;
+
+/* Used to pass the media type, etc.
+   Both 'options[]' and 'full_duplex[]' should exist for driver
+   interoperability, however setting full_duplex[] is deprecated.
+   The media type is usually passed in 'options[]'.
+    The default is autonegotation for speed and duplex.
+	This should rarely be overridden.
+    Use option values 0x10/0x20 for 10Mbps, 0x100,0x200 for 100Mbps.
+    Use option values 0x10 and 0x100 for forcing half duplex fixed speed.
+    Use option values 0x20 and 0x200 for forcing full duplex operation.
+*/
+#define MAX_UNITS 8		/* More are supported, limit only on options */
+static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+   The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+   Making the Tx ring too large decreases the effectiveness of channel
+   bonding and packet priority, confuses the system network buffer limits,
+   and wastes memory.
+   Larger receive rings merely waste memory.
+*/
+#define TX_RING_SIZE	16
+#define TX_QUEUE_LEN	10		/* Limit ring entries actually used, min 4. */
+#define RX_RING_SIZE	32
+
+/* The presumed FIFO size for working around the Tx-FIFO-overflow bug.
+   To avoid overflowing we don't queue again until we have room for a
+   full-size packet.
+ */
+#define TX_FIFO_SIZE (2048)
+#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16)
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung.
+   Re-autonegotiation may take up to 3 seconds.
+ */
+#define TX_TIMEOUT  (6*HZ)
+
+/* Allocation size of Rx buffers with normal sized Ethernet frames.
+   Do not change this value without good reason.  This is not a limit,
+   but a way to keep a consistent allocation size among drivers.
+ */
+#define PKT_BUF_SZ		1536
+
+#ifndef __KERNEL__
+#define __KERNEL__
+#endif
+#if !defined(__OPTIMIZE__)
+#warning  You must compile this file with the correct options!
+#warning  See the last lines of the source file.
+#error You must compile this driver with "-O".
+#endif
+
+/* Include files, designed to support most kernel versions 2.0.0 and later. */
+#include <linux/config.h>
+#if defined(CONFIG_SMP) && ! defined(__SMP__)
+#define __SMP__
+#endif
+#if defined(MODULE) && defined(CONFIG_MODVERSIONS) && ! defined(MODVERSIONS)
+#define MODVERSIONS
+#endif
+
+#include <linux/version.h>
+#if defined(MODVERSIONS)
+#include <linux/modversions.h>
+#endif
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#if LINUX_VERSION_CODE >= 0x20400
+#include <linux/slab.h>
+#else
+#include <linux/malloc.h>
+#endif
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <asm/processor.h>		/* Processor type for cache alignment. */
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#ifdef INLINE_PCISCAN
+#include "k_compat.h"
+#else
+#include "pci-scan.h"
+#include "kern_compat.h"
+#endif
+
+/* Configure the PCI bus bursts and FIFO thresholds.
+	   486: Set 8 longword cache alignment, 8 longword burst.
+	   586: Set 16 longword cache alignment, no burst limit.
+	   Cache alignment bits 15:14	     Burst length 13:8
+		0000	<not allowed> 		0000 align to cache	0800 8 longwords
+		4000	8  longwords		0100 1 longword		1000 16 longwords
+		8000	16 longwords		0200 2 longwords	2000 32 longwords
+		C000	32  longwords		0400 4 longwords
+	Wait the specified 50 PCI cycles after a reset by initializing
+	Tx and Rx queues and the address filter list. */
+#define TX_DESC_SIZE	16
+#if defined(__powerpc__) || defined(__sparc__)		/* Big endian */
+static int csr0 = 0x00100000 | 0xE000 | TX_DESC_SIZE;
+#elif defined(__alpha__) || defined(__x86_64) || defined(__ia64)
+static int csr0 = 0xE000 | TX_DESC_SIZE;
+#elif defined(__i386__)
+static int csr0 = 0xE000 | TX_DESC_SIZE;
+#else
+static int csr0 = 0xE000 | TX_DESC_SIZE;
+#warning Processor architecture unknown!
+#endif
+
+
+
+#if (LINUX_VERSION_CODE >= 0x20100)  &&  defined(MODULE)
+char kernel_version[] = UTS_RELEASE;
+#endif
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_PARM(max_interrupt_work, "i");
+MODULE_PARM(debug, "i");
+MODULE_PARM(rx_copybreak, "i");
+MODULE_PARM(options, "1-" __MODULE_STRING(MAX_UNITS) "i");
+MODULE_PARM(full_duplex, "1-" __MODULE_STRING(MAX_UNITS) "i");
+MODULE_PARM(multicast_filter_limit, "i");
+MODULE_PARM_DESC(debug, "Driver message level (0-31)");
+MODULE_PARM_DESC(options, "Force transceiver type or fixed speed+duplex");
+MODULE_PARM_DESC(max_interrupt_work,
+				 "Driver maximum events handled per interrupt");
+MODULE_PARM_DESC(full_duplex, "Non-zero to set forced full duplex.");
+MODULE_PARM_DESC(rx_copybreak,
+				 "Breakpoint in bytes for copy-only-tiny-frames");
+MODULE_PARM_DESC(multicast_filter_limit,
+				 "Multicast addresses before switching to Rx-all-multicast");
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This driver is for the Winbond w89c840 chip.
+
+II. Board-specific settings
+
+None.
+
+III. Driver operation
+
+This chip is very similar to the Digital 21*4* "Tulip" family.  The first
+twelve registers and the descriptor format are nearly identical.  Read a
+Tulip manual for operational details.
+
+A significant difference is that the multicast filter and station address are
+stored in registers rather than loaded through a pseudo-transmit packet.
+
+Unlike the Tulip, transmit buffers are limited to 1KB.  To transmit a
+full-sized packet we must use both data buffers in a descriptor.  Thus the
+driver uses ring mode where descriptors are implicitly sequential in memory,
+rather than using the second descriptor address as a chain pointer to
+subsequent descriptors.
+
+IV. Notes
+
+If you are going to almost clone a Tulip, why not go all the way and avoid
+the need for a new driver?
+
+IVb. References
+
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+http://www.winbond.com.tw/
+
+IVc. Errata
+
+A horrible bug exists in the transmit FIFO.  Apparently the chip doesn't
+correctly detect a full FIFO, and queuing more than 2048 bytes may result in
+silent data corruption.
+
+*/
+
+
+
+/*
+  PCI probe table.
+*/
+static void *w840_probe1(struct pci_dev *pdev, void *init_dev,
+						 long ioaddr, int irq, int chip_idx, int find_cnt);
+static int winbond_pwr_event(void *dev_instance, int event);
+enum chip_capability_flags {
+	CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,};
+#ifdef USE_IO_OPS
+#define W840_FLAGS (PCI_USES_IO | PCI_ADDR0 | PCI_USES_MASTER)
+#else
+#define W840_FLAGS (PCI_USES_MEM | PCI_ADDR1 | PCI_USES_MASTER)
+#endif
+
+static struct pci_id_info pci_id_tbl[] = {
+	{"Winbond W89c840",			/* Sometime a Level-One switch card. */
+	 { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 },
+	 W840_FLAGS, 128, CanHaveMII | HasBrokenTx | FDXOnNoMII},
+	{"Winbond W89c840", { 0x08401050, 0xffffffff, },
+	 W840_FLAGS, 128, CanHaveMII | HasBrokenTx},
+	{"Compex RL100-ATX", { 0x201111F6, 0xffffffff,},
+	 W840_FLAGS, 128, CanHaveMII | HasBrokenTx},
+	{0,},						/* 0 terminated list. */
+};
+
+struct drv_id_info winbond840_drv_id = {
+	"winbond-840", PCI_HOTSWAP, PCI_CLASS_NETWORK_ETHERNET<<8, pci_id_tbl,
+	w840_probe1, winbond_pwr_event };
+
+/* This driver was written to use PCI memory space, however some x86 systems
+   work only with I/O space accesses.  Pass -DUSE_IO_OPS to use PCI I/O space
+   accesses instead of memory space. */
+
+#ifdef USE_IO_OPS
+#undef readb
+#undef readw
+#undef readl
+#undef writeb
+#undef writew
+#undef writel
+#define readb inb
+#define readw inw
+#define readl inl
+#define writeb outb
+#define writew outw
+#define writel outl
+#endif
+
+/* Offsets to the Command and Status Registers, "CSRs".
+   While similar to the Tulip, these registers are longword aligned.
+   Note: It's not useful to define symbolic names for every register bit in
+   the device.  The name can only partially document the semantics and make
+   the driver longer and more difficult to read.
+*/
+enum w840_offsets {
+	PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08,
+	RxRingPtr=0x0C, TxRingPtr=0x10,
+	IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C,
+	RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C,
+	CurRxDescAddr=0x30, CurRxBufAddr=0x34,			/* Debug use */
+	MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40,
+	CurTxDescAddr=0x4C, CurTxBufAddr=0x50,
+};
+
+/* Bits in the interrupt status/enable registers. */
+/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */
+enum intr_status_bits {
+	NormalIntr=0x10000, AbnormalIntr=0x8000,
+	IntrPCIErr=0x2000, TimerInt=0x800,
+	IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40,
+	TxFIFOUnderflow=0x20, RxErrIntr=0x10,
+	TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01,
+};
+
+/* Bits in the NetworkConfig register. */
+enum rx_mode_bits {
+	TxOn=0x2000, RxOn=0x0002, FullDuplex=0x0200,
+	AcceptErr=0x80, AcceptRunt=0x40, 		/* Not used */
+	AcceptBroadcast=0x20, AcceptMulticast=0x10, AcceptAllPhys=0x08,
+};
+
+enum mii_reg_bits {
+	MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000,
+	MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000,
+};
+
+/* The Tulip-like Rx and Tx buffer descriptors. */
+struct w840_rx_desc {
+	s32 status;
+	s32 length;
+	u32 buffer1;
+	u32 next_desc;
+};
+
+struct w840_tx_desc {
+	s32 status;
+	s32 length;
+	u32 buffer1, buffer2;				/* We use only buffer 1.  */
+	char pad[TX_DESC_SIZE - 16];
+};
+
+/* Bits in network_desc.status */
+enum desc_status_bits {
+	DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000,
+	DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000,
+	DescIntr=0x80000000,
+};
+
+#define PRIV_ALIGN	15 	/* Required alignment mask */
+struct netdev_private {
+	/* Descriptor rings first for alignment. */
+	struct w840_rx_desc rx_ring[RX_RING_SIZE];
+	struct w840_tx_desc tx_ring[TX_RING_SIZE];
+	struct net_device *next_module;		/* Link for devices of this type. */
+	void *priv_addr;					/* Unaligned address for kfree */
+	const char *product_name;
+	/* The addresses of receive-in-place skbuffs. */
+	struct sk_buff* rx_skbuff[RX_RING_SIZE];
+	/* The saved address of a sent-in-place packet/buffer, for later free(). */
+	struct sk_buff* tx_skbuff[TX_RING_SIZE];
+	struct net_device_stats stats;
+	struct timer_list timer;	/* Media monitoring timer. */
+	/* Frequently used values: keep some adjacent for cache effect. */
+	int msg_level;
+	int chip_id, drv_flags;
+	struct pci_dev *pci_dev;
+	int csr0, csr6;
+	unsigned int polling;				/* Switched to polling mode. */
+	int max_interrupt_work;
+
+	struct w840_rx_desc *rx_head_desc;
+	unsigned int rx_ring_size;
+	unsigned int cur_rx, dirty_rx;		/* Producer/consumer ring indices */
+	unsigned int rx_buf_sz;				/* Based on MTU+slack. */
+	int rx_copybreak;
+
+	unsigned int tx_ring_size;
+	unsigned int cur_tx, dirty_tx;
+	unsigned int tx_q_bytes, tx_unq_bytes;
+	unsigned int tx_full:1;				/* The Tx queue is full. */
+
+	/* These values track of the transceiver/media in use. */
+	unsigned int full_duplex:1;			/* Full-duplex operation requested. */
+	unsigned int duplex_lock:1;
+	unsigned int medialock:1;			/* Do not sense media. */
+	unsigned int default_port;			/* Last dev->if_port value. */
+	/* Rx filter. */
+	u32 cur_rx_mode;
+	u32 rx_filter[2];
+	int multicast_filter_limit;
+
+	/* MII transceiver section. */
+	int mii_cnt;						/* MII device addresses. */
+	u16 advertising;					/* NWay media advertisement */
+	unsigned char phys[2];				/* MII device addresses. */
+};
+
+static int  eeprom_read(long ioaddr, int location);
+static int  mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int  netdev_open(struct net_device *dev);
+static void check_duplex(struct net_device *dev);
+static void netdev_timer(unsigned long data);
+static void tx_timeout(struct net_device *dev);
+static void init_ring(struct net_device *dev);
+static int  start_tx(struct sk_buff *skb, struct net_device *dev);
+static void intr_handler(int irq, void *dev_instance, struct pt_regs *regs);
+static void netdev_error(struct net_device *dev, int intr_status);
+static int  netdev_rx(struct net_device *dev);
+static void netdev_error(struct net_device *dev, int intr_status);
+static inline unsigned ether_crc(int length, unsigned char *data);
+static void set_rx_mode(struct net_device *dev);
+static struct net_device_stats *get_stats(struct net_device *dev);
+static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int  netdev_close(struct net_device *dev);
+
+
+
+/* A list of our installed devices, for removing the driver module. */
+static struct net_device *root_net_dev = NULL;
+
+static void *w840_probe1(struct pci_dev *pdev, void *init_dev,
+						 long ioaddr, int irq, int chip_idx, int card_idx)
+{
+	struct net_device *dev;
+	struct netdev_private *np;
+	void *priv_mem;
+	int i, option = card_idx < MAX_UNITS ? options[card_idx] : 0;
+
+	dev = init_etherdev(init_dev, 0);
+	if (!dev)
+		return NULL;
+
+#if LINUX_VERSION_CODE < 0x20155
+	printk(KERN_INFO "%s: %s at 0x%lx, %2.2x:%2.2x",
+		   dev->name, pci_id_tbl[chip_idx].name, ioaddr,
+		   pci_bus_number(pdev), pci_devfn(pdev)>>3);
+#else
+	printk(KERN_INFO "%s: %s at 0x%lx, %2.2x:%2.2x",
+		   dev->name, pci_id_tbl[chip_idx].name, ioaddr,
+		   pdev->bus->number, pdev->devfn>>3);
+#endif
+
+	/* Warning: validate for big-endian machines. */
+	for (i = 0; i < 3; i++)
+		((u16 *)dev->dev_addr)[i] = le16_to_cpu(eeprom_read(ioaddr, i));
+
+	for (i = 0; i < 5; i++)
+		printk("%2.2x:", dev->dev_addr[i]);
+	printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
+
+	priv_mem = kmalloc(sizeof(*np) + PRIV_ALIGN, GFP_KERNEL);
+	/* Out of memory is very unlikely. */
+	if (priv_mem == NULL)
+		return NULL;
+
+#ifdef USE_IO_OPS
+	request_region(ioaddr, pci_id_tbl[chip_idx].io_size, dev->name);
+#endif
+
+	/* Reset the chip to erase previous misconfiguration.
+	   No hold time required! */
+	writel(0x00000001, ioaddr + PCIBusCfg);
+
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+
+	/* The descriptor lists must be aligned. */
+	dev->priv = np = (void *)(((long)priv_mem + PRIV_ALIGN) & ~PRIV_ALIGN);
+	memset(np, 0, sizeof(*np));
+	np->priv_addr = priv_mem;
+
+	np->next_module = root_net_dev;
+	root_net_dev = dev;
+
+	np->pci_dev = pdev;
+	np->chip_id = chip_idx;
+	np->drv_flags = pci_id_tbl[chip_idx].drv_flags;
+	np->msg_level = (1 << debug) - 1;
+	np->rx_copybreak = rx_copybreak;
+	np->max_interrupt_work = max_interrupt_work;
+	np->multicast_filter_limit = multicast_filter_limit;
+	np->tx_ring_size = TX_RING_SIZE;
+	np->rx_ring_size = RX_RING_SIZE;
+
+	if (dev->mem_start)
+		option = dev->mem_start;
+
+	if ((card_idx < MAX_UNITS  &&  full_duplex[card_idx] > 0)
+		|| (np->drv_flags & AlwaysFDX))
+		np->full_duplex = 1;
+
+	/* The chip-specific entries in the device structure. */
+	dev->open = &netdev_open;
+	dev->hard_start_xmit = &start_tx;
+	dev->stop = &netdev_close;
+	dev->get_stats = &get_stats;
+	dev->set_multicast_list = &set_rx_mode;
+	dev->do_ioctl = &mii_ioctl;
+
+	if (np->drv_flags & CanHaveMII) {
+		int phy, phy_idx = 0;
+		for (phy = 1; phy < 32 && phy_idx < 4; phy++) {
+			int mii_status = mdio_read(dev, phy, 1);
+			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+				np->phys[phy_idx++] = phy;
+				np->advertising = mdio_read(dev, phy, 4);
+				printk(KERN_INFO "%s: MII PHY found at address %d, status "
+					   "0x%4.4x advertising %4.4x.\n",
+					   dev->name, phy, mii_status, np->advertising);
+			}
+		}
+		np->mii_cnt = phy_idx;
+		if (phy_idx == 0) {
+			printk(KERN_WARNING "%s: MII PHY not found -- this device may "
+				   "not operate correctly.\n"
+				   KERN_WARNING "%s:  If this is a switch card, explicitly "
+				   "force full duplex on this interface.\n",
+				   dev->name, dev->name);
+			if (np->drv_flags & FDXOnNoMII) {
+				printk(KERN_INFO "%s:  Assuming a switch card, forcing full "
+					   "duplex.\n", dev->name);
+				np->full_duplex = np->duplex_lock = 1;
+			}
+		}
+	}
+	/* Allow forcing the media type. */
+	if (np->full_duplex) {
+		printk(KERN_INFO "%s: Set to forced full duplex, autonegotiation"
+			   " disabled.\n", dev->name);
+		np->duplex_lock = 1;
+	}
+	if (option > 0) {
+		if (option & 0x220)
+			np->full_duplex = 1;
+		np->default_port = option & 0x3ff;
+		if (np->default_port & 0x330) {
+			np->medialock = 1;
+			printk(KERN_INFO "  Forcing %dMbs %s-duplex operation.\n",
+				   (option & 0x300 ? 100 : 10),
+				   (np->full_duplex ? "full" : "half"));
+			if (np->mii_cnt)
+				mdio_write(dev, np->phys[0], 0,
+						   ((option & 0x300) ? 0x2000 : 0) | 	/* 100mbps? */
+						   (np->full_duplex ? 0x0100 : 0)); /* Full duplex? */
+		}
+	}
+
+	return dev;
+}
+
+
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
+   The Winbond NIC uses serial bit streams generated by the host processor. */
+
+/* Delay between EEPROM clock transitions.
+   This "delay" is to force out buffered PCI writes. */
+#define eeprom_delay(ee_addr)	readl(ee_addr)
+
+enum EEPROM_Ctrl_Bits {
+	EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805,
+	EE_ChipSelect=0x801, EE_DataIn=0x08,
+};
+
+/* The EEPROM commands always start with 01.. preamble bits.
+   Commands are prepended to the variable-length address. */
+enum EEPROM_Cmds {
+	EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
+};
+
+static int eeprom_read(long addr, int location)
+{
+	int i;
+	int retval = 0;
+	long ee_addr = addr + EECtrl;
+	int read_cmd = location | EE_ReadCmd;
+
+	writel(EE_ChipSelect, ee_addr);
+	/* Shift the read command bits out. */
+	for (i = 10; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+		writel(dataval, ee_addr);
+		eeprom_delay(ee_addr);
+		writel(dataval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+	writel(EE_ChipSelect, ee_addr);
+	eeprom_delay(ee_addr);
+
+	for (i = 16; i > 0; i--) {
+		writel(EE_ChipSelect | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+		retval = (retval << 1) | ((readl(ee_addr) & EE_DataIn) ? 1 : 0);
+		writel(EE_ChipSelect, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	/* Terminate the EEPROM access. */
+	writel(0, ee_addr);
+	return retval;
+}
+
+/*  MII transceiver control section.
+	Read and write the MII registers using software-generated serial
+	MDIO protocol.  See the MII specifications or DP83840A data sheet
+	for details.
+
+	The maximum data clock rate is 2.5 Mhz.
+	The timing is decoupled from the processor clock by flushing the write
+	from the CPU write buffer with a following read, and using PCI
+	transaction time. */
+#define mdio_in(mdio_addr) readl(mdio_addr)
+#define mdio_out(value, mdio_addr) writel(value, mdio_addr)
+#define mdio_delay(mdio_addr) readl(mdio_addr)
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+   This only set with older tranceivers, so the extra
+   code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required = 1;
+
+#define MDIO_WRITE0 (MDIO_EnbOutput)
+#define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput)
+
+/* Generate the preamble required for initial synchronization and
+   a few older transceivers. */
+static void mdio_sync(long mdio_addr)
+{
+	int bits = 32;
+
+	/* Establish sync by sending at least 32 logic ones. */
+	while (--bits >= 0) {
+		mdio_out(MDIO_WRITE1, mdio_addr);
+		mdio_delay(mdio_addr);
+		mdio_out(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+	long mdio_addr = dev->base_addr + MIICtrl;
+	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	int i, retval = 0;
+
+	if (mii_preamble_required)
+		mdio_sync(mdio_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+		mdio_out(dataval, mdio_addr);
+		mdio_delay(mdio_addr);
+		mdio_out(dataval | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 20; i > 0; i--) {
+		mdio_out(MDIO_EnbIn, mdio_addr);
+		mdio_delay(mdio_addr);
+		retval = (retval << 1) | ((mdio_in(mdio_addr) & MDIO_DataIn) ? 1 : 0);
+		mdio_out(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	return (retval>>1) & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int reg, int value)
+{
+	long mdio_addr = dev->base_addr + MIICtrl;
+	int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (reg<<18) | value;
+	int i;
+
+	if (mii_preamble_required)
+		mdio_sync(mdio_addr);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+		mdio_out(dataval, mdio_addr);
+		mdio_delay(mdio_addr);
+		mdio_out(dataval | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	/* Clear out extra bits. */
+	for (i = 2; i > 0; i--) {
+		mdio_out(MDIO_EnbIn, mdio_addr);
+		mdio_delay(mdio_addr);
+		mdio_out(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	return;
+}
+
+
+static int netdev_open(struct net_device *dev)
+{
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	long ioaddr = dev->base_addr;
+	int i;
+
+	writel(0x00000001, ioaddr + PCIBusCfg);		/* Reset */
+
+	MOD_INC_USE_COUNT;
+
+	if (request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev)) {
+		MOD_DEC_USE_COUNT;
+		return -EAGAIN;
+	}
+
+	if (np->msg_level & NETIF_MSG_IFUP)
+		printk(KERN_DEBUG "%s: w89c840_open() irq %d.\n",
+			   dev->name, dev->irq);
+
+	init_ring(dev);
+
+	writel(virt_to_bus(np->rx_ring), ioaddr + RxRingPtr);
+	writel(virt_to_bus(np->tx_ring), ioaddr + TxRingPtr);
+
+	for (i = 0; i < 6; i++)
+		writeb(dev->dev_addr[i], ioaddr + StationAddr + i);
+
+	/* Initialize other registers. */
+	np->csr0 = csr0;
+	writel(np->csr0, ioaddr + PCIBusCfg);
+
+	if (dev->if_port == 0)
+		dev->if_port = np->default_port;
+
+	writel(0, ioaddr + RxStartDemand);
+	np->csr6 = np->full_duplex ? 0x20022202 : 0x20022002;
+	check_duplex(dev);
+	set_rx_mode(dev);
+
+	netif_start_tx_queue(dev);
+
+	/* Clear and Enable interrupts by setting the interrupt mask.
+	   See enum intr_status_bits above for bit guide.
+	   We omit: TimerInt, IntrRxDied, IntrTxStopped
+	*/
+	writel(0x1A0F5, ioaddr + IntrStatus);
+	writel(0x1A0F5, ioaddr + IntrEnable);
+
+	if (np->msg_level & NETIF_MSG_IFUP)
+		printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
+
+	/* Set the timer to check for link beat. */
+	init_timer(&np->timer);
+	np->timer.expires = jiffies + 3*HZ;
+	np->timer.data = (unsigned long)dev;
+	np->timer.function = &netdev_timer;				/* timer handler */
+	add_timer(&np->timer);
+
+	return 0;
+}
+
+static void check_duplex(struct net_device *dev)
+{
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	int mii_reg5 = mdio_read(dev, np->phys[0], 5);
+	int negotiated =  mii_reg5 & np->advertising;
+	int duplex;
+
+	if (np->duplex_lock  ||  mii_reg5 == 0xffff)
+		return;
+	duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
+	if (np->full_duplex != duplex) {
+		np->full_duplex = duplex;
+		if (np->msg_level & NETIF_MSG_LINK)
+			printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d "
+				   "negotiated capability %4.4x.\n", dev->name,
+				   duplex ? "full" : "half", np->phys[0], negotiated);
+		np->csr6 &= ~0x200;
+		np->csr6 |= duplex ? 0x200 : 0;
+	}
+}
+
+static void netdev_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	long ioaddr = dev->base_addr;
+	int next_tick = 10*HZ;
+	int old_csr6 = np->csr6;
+	u32 intr_status = readl(ioaddr + IntrStatus);
+
+	if (np->msg_level & NETIF_MSG_TIMER)
+		printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x "
+			   "config %8.8x.\n",
+			   dev->name, intr_status, (int)readl(ioaddr + NetworkConfig));
+	/* Check for blocked interrupts. */
+	if (np->polling) {
+		if (intr_status & 0x1ffff) {
+			intr_handler(dev->irq, dev, 0);
+			next_tick = 1;
+			np->polling = 1;
+		} else if (++np->polling > 10*HZ)
+			np->polling = 0;
+		else
+			next_tick = 2;
+	} else if ((intr_status & 0x1ffff)) {
+		np->polling = 1;
+	}
+
+	if (netif_queue_paused(dev)  &&
+		np->cur_tx - np->dirty_tx > 1  &&
+		(jiffies - dev->trans_start) > TX_TIMEOUT) {
+		tx_timeout(dev);
+	}
+	check_duplex(dev);
+	if (np->csr6 != old_csr6) {
+		writel(np->csr6 & ~0x0002, ioaddr + NetworkConfig);
+		writel(np->csr6 | 0x2002, ioaddr + NetworkConfig);
+	}
+	np->timer.expires = jiffies + next_tick;
+	add_timer(&np->timer);
+}
+
+static void tx_timeout(struct net_device *dev)
+{
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	long ioaddr = dev->base_addr;
+
+	printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
+		   " resetting...\n", dev->name, (int)readl(ioaddr + IntrStatus));
+
+#ifndef __alpha__
+	if (np->msg_level & NETIF_MSG_TX_ERR) {
+		int i;
+		printk(KERN_DEBUG "  Rx ring %p: ", np->rx_ring);
+		for (i = 0; i < np->rx_ring_size; i++)
+			printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
+		printk("\n"KERN_DEBUG"  Tx ring %p: ", np->tx_ring);
+		for (i = 0; i < np->tx_ring_size; i++)
+			printk(" %8.8x", np->tx_ring[i].status);
+		printk("\n");
+	}
+#endif
+
+	/* Perhaps we should reinitialize the hardware here.  Just trigger a
+	   Tx demand for now. */
+	writel(0, ioaddr + TxStartDemand);
+	dev->if_port = 0;
+	/* Stop and restart the chip's Tx processes . */
+
+	dev->trans_start = jiffies;
+	np->stats.tx_errors++;
+	return;
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void init_ring(struct net_device *dev)
+{
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	int i;
+
+	np->tx_full = 0;
+	np->cur_tx = np->dirty_tx = 0;
+	np->tx_q_bytes = np->tx_unq_bytes = 0;
+
+	np->cur_rx = np->dirty_rx = 0;
+	np->rx_buf_sz = (dev->mtu <= 1522 ? PKT_BUF_SZ : dev->mtu + 14);
+	np->rx_head_desc = &np->rx_ring[0];
+
+	/* Initialize all Rx descriptors. */
+	for (i = 0; i < np->rx_ring_size; i++) {
+		np->rx_ring[i].length = np->rx_buf_sz;
+		np->rx_ring[i].status = 0;
+		np->rx_ring[i].next_desc = virt_to_bus(&np->rx_ring[i+1]);
+		np->rx_skbuff[i] = 0;
+	}
+	/* Mark the last entry as wrapping the ring. */
+	np->rx_ring[i-1].length |= DescEndRing;
+	np->rx_ring[i-1].next_desc = virt_to_bus(&np->rx_ring[0]);
+
+	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
+	for (i = 0; i < np->rx_ring_size; i++) {
+		struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
+		np->rx_skbuff[i] = skb;
+		if (skb == NULL)
+			break;
+		skb->dev = dev;			/* Mark as being used by this device. */
+		np->rx_ring[i].buffer1 = virt_to_bus(skb->tail);
+		np->rx_ring[i].status = DescOwn | DescIntr;
+	}
+	np->dirty_rx = (unsigned int)(i - np->rx_ring_size);
+
+	for (i = 0; i < np->tx_ring_size; i++) {
+		np->tx_skbuff[i] = 0;
+		np->tx_ring[i].status = 0;
+	}
+	return;
+}
+
+static int start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	unsigned entry;
+
+	/* Block a timer-based transmit from overlapping. */
+	if (netif_pause_tx_queue(dev) != 0) {
+		/* This watchdog code is redundant with the media monitor timer. */
+		if (jiffies - dev->trans_start > TX_TIMEOUT)
+			tx_timeout(dev);
+		return 1;
+	}
+
+	/* Note: Ordering is important here, set the field with the
+	   "ownership" bit last, and only then increment cur_tx. */
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = np->cur_tx % np->tx_ring_size;
+
+	np->tx_skbuff[entry] = skb;
+	np->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
+
+#define one_buffer
+#define BPT 1022
+#if defined(one_buffer)
+	np->tx_ring[entry].length = DescWholePkt | skb->len;
+	if (entry >= np->tx_ring_size-1)		 /* Wrap ring */
+		np->tx_ring[entry].length |= DescIntr | DescEndRing;
+	np->tx_ring[entry].status = DescOwn;
+	np->cur_tx++;
+#elif defined(two_buffer)
+	if (skb->len > BPT) {
+		unsigned int entry1 = ++np->cur_tx % np->tx_ring_size;
+		np->tx_ring[entry].length = DescStartPkt | BPT;
+		np->tx_ring[entry1].length = DescEndPkt | (skb->len - BPT);
+		np->tx_ring[entry1].buffer1 = virt_to_bus((skb->data) + BPT);
+		np->tx_ring[entry1].status = DescOwn;
+		np->tx_ring[entry].status = DescOwn;
+		if (entry >= np->tx_ring_size-1)
+			np->tx_ring[entry].length |= DescIntr|DescEndRing;
+		else if (entry1 >= np->tx_ring_size-1)
+			np->tx_ring[entry1].length |= DescIntr|DescEndRing;
+		np->cur_tx++;
+	} else {
+		np->tx_ring[entry].length = DescWholePkt | skb->len;
+		if (entry >= np->tx_ring_size-1)		 /* Wrap ring */
+			np->tx_ring[entry].length |= DescIntr | DescEndRing;
+		np->tx_ring[entry].status = DescOwn;
+		np->cur_tx++;
+	}
+#elif defined(split_buffer)
+	{
+		/* Work around the Tx-FIFO-full bug by splitting our transmit packet
+		   into two pieces, the first which may be loaded without overflowing
+		   the FIFO, and the second which contains the remainder of the
+		   packet.  When we get a Tx-done interrupt that frees enough room
+		   in the FIFO we mark the remainder of the packet as loadable.
+
+		   This has the problem that the Tx descriptors are written both
+		   here and in the interrupt handler.
+		*/
+
+		int buf1size = TX_FIFO_SIZE - (np->tx_q_bytes - np->tx_unq_bytes);
+		int buf2size = skb->len - buf1size;
+
+		if (buf2size <= 0) {		/* We fit into one descriptor. */
+			np->tx_ring[entry].length = DescWholePkt | skb->len;
+		} else {				/* We must use two descriptors. */
+			unsigned int entry2;
+			np->tx_ring[entry].length = DescIntr | DescStartPkt | buf1size;
+			if (entry >= np->tx_ring_size-1) {		 /* Wrap ring */
+				np->tx_ring[entry].length |= DescEndRing;
+				entry2 = 0;
+			} else
+				entry2 = entry + 1;
+			np->cur_tx++;
+			np->tx_ring[entry2].buffer1 =
+				virt_to_bus(skb->data + buf1size);
+			np->tx_ring[entry2].length = DescEndPkt | buf2size;
+			if (entry2 >= np->tx_ring_size-1)		 /* Wrap ring */
+				np->tx_ring[entry2].length |= DescEndRing;
+		}
+		np->tx_ring[entry].status = DescOwn;
+		np->cur_tx++;
+	}
+#endif
+	np->tx_q_bytes += skb->len;
+	writel(0, dev->base_addr + TxStartDemand);
+
+	/* Work around horrible bug in the chip by marking the queue as full
+	   when we do not have FIFO room for a maximum sized packet. */
+	if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN) {
+		np->tx_full = 1;
+		netif_stop_tx_queue(dev);
+	} else if ((np->drv_flags & HasBrokenTx)
+			   && np->tx_q_bytes - np->tx_unq_bytes > TX_BUG_FIFO_LIMIT) {
+		np->tx_full = 1;
+		netif_stop_tx_queue(dev);
+	} else
+		netif_unpause_tx_queue(dev);		/* Typical path */
+
+	dev->trans_start = jiffies;
+
+	if (np->msg_level & NETIF_MSG_TX_QUEUED) {
+		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
+			   dev->name, np->cur_tx, entry);
+	}
+	return 0;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static void intr_handler(int irq, void *dev_instance, struct pt_regs *rgs)
+{
+	struct net_device *dev = (struct net_device *)dev_instance;
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	long ioaddr = dev->base_addr;
+	int work_limit = np->max_interrupt_work;
+
+	do {
+		u32 intr_status = readl(ioaddr + IntrStatus);
+
+		/* Acknowledge all of the current interrupt sources ASAP. */
+		writel(intr_status & 0x0001ffff, ioaddr + IntrStatus);
+
+		if (np->msg_level & NETIF_MSG_INTR)
+			printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n",
+				   dev->name, intr_status);
+
+		if ((intr_status & (NormalIntr|AbnormalIntr)) == 0
+			|| intr_status == 0xffffffff)
+			break;
+
+		if (intr_status & (IntrRxDone | RxNoBuf))
+			netdev_rx(dev);
+
+		for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
+			int entry = np->dirty_tx % np->tx_ring_size;
+			int tx_status = np->tx_ring[entry].status;
+
+			if (tx_status < 0)
+				break;
+			if (np->msg_level & NETIF_MSG_TX_DONE)
+				printk(KERN_DEBUG "%s: Transmit done, Tx status %8.8x.\n",
+					   dev->name, tx_status);
+			if (tx_status & 0x8000) { 		/* There was an error, log it. */
+				if (np->msg_level & NETIF_MSG_TX_ERR)
+					printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+						   dev->name, tx_status);
+				np->stats.tx_errors++;
+				if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
+				if (tx_status & 0x0C80) np->stats.tx_carrier_errors++;
+				if (tx_status & 0x0200) np->stats.tx_window_errors++;
+				if (tx_status & 0x0002) np->stats.tx_fifo_errors++;
+				if ((tx_status & 0x0080) && np->full_duplex == 0)
+					np->stats.tx_heartbeat_errors++;
+#ifdef ETHER_STATS
+				if (tx_status & 0x0100) np->stats.collisions16++;
+#endif
+			} else {
+#ifdef ETHER_STATS
+				if (tx_status & 0x0001) np->stats.tx_deferred++;
+#endif
+#if LINUX_VERSION_CODE > 0x20127
+				np->stats.tx_bytes += np->tx_skbuff[entry]->len;
+#endif
+				np->stats.collisions += (tx_status >> 3) & 15;
+				np->stats.tx_packets++;
+			}
+			/* Free the original skb. */
+			np->tx_unq_bytes += np->tx_skbuff[entry]->len;
+			dev_free_skb_irq(np->tx_skbuff[entry]);
+			np->tx_skbuff[entry] = 0;
+		}
+		if (np->tx_full &&
+			np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4
+			&&  np->tx_q_bytes - np->tx_unq_bytes < TX_BUG_FIFO_LIMIT) {
+			/* The ring is no longer full, allow new TX entries. */
+			np->tx_full = 0;
+			netif_resume_tx_queue(dev);
+		}
+
+		/* Abnormal error summary/uncommon events handlers. */
+		if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr |
+						   TimerInt | IntrTxStopped))
+			netdev_error(dev, intr_status);
+
+		if (--work_limit < 0) {
+			printk(KERN_WARNING "%s: Too much work at interrupt, "
+				   "status=0x%4.4x.\n", dev->name, intr_status);
+			/* Set the timer to re-enable the other interrupts after
+			   10*82usec ticks. */
+			writel(AbnormalIntr | TimerInt, ioaddr + IntrEnable);
+			writel(10, ioaddr + GPTimer);
+			break;
+		}
+	} while (1);
+
+	if (np->msg_level & NETIF_MSG_INTR)
+		printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
+			   dev->name, (int)readl(ioaddr + IntrStatus));
+
+	return;
+}
+
+/* This routine is logically part of the interrupt handler, but separated
+   for clarity and better register allocation. */
+static int netdev_rx(struct net_device *dev)
+{
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	int entry = np->cur_rx % np->rx_ring_size;
+	int work_limit = np->dirty_rx + np->rx_ring_size - np->cur_rx;
+
+	if (np->msg_level & NETIF_MSG_RX_STATUS) {
+		printk(KERN_DEBUG " In netdev_rx(), entry %d status %4.4x.\n",
+			   entry, np->rx_ring[entry].status);
+	}
+
+	/* If EOP is set on the next entry, it's a new packet. Send it up. */
+	while (--work_limit >= 0) {
+		struct w840_rx_desc *desc = np->rx_head_desc;
+		s32 status = desc->status;
+
+		if (np->msg_level & NETIF_MSG_RX_STATUS)
+			printk(KERN_DEBUG "  netdev_rx() status was %8.8x.\n",
+				   status);
+		if (status < 0)
+			break;
+		if ((status & 0x38008300) != 0x0300) {
+			if ((status & 0x38000300) != 0x0300) {
+				/* Ingore earlier buffers. */
+				if ((status & 0xffff) != 0x7fff) {
+					printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
+						   "multiple buffers, entry %#x status %4.4x!\n",
+						   dev->name, np->cur_rx, status);
+					np->stats.rx_length_errors++;
+				}
+			} else if (status & 0x8000) {
+				/* There was a fatal error. */
+				if (np->msg_level & NETIF_MSG_RX_ERR)
+					printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
+						   dev->name, status);
+				np->stats.rx_errors++; /* end of a packet.*/
+				if (status & 0x0890) np->stats.rx_length_errors++;
+				if (status & 0x004C) np->stats.rx_frame_errors++;
+				if (status & 0x0002) np->stats.rx_crc_errors++;
+			}
+		} else {
+			struct sk_buff *skb;
+			/* Omit the four octet CRC from the length. */
+			int pkt_len = ((status >> 16) & 0x7ff) - 4;
+
+			if (np->msg_level & NETIF_MSG_RX_STATUS)
+				printk(KERN_DEBUG "  netdev_rx() normal Rx pkt length %d"
+					   " status %x.\n", pkt_len, status);
+			/* Check if the packet is long enough to accept without copying
+			   to a minimally-sized skbuff. */
+			if (pkt_len < np->rx_copybreak
+				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+				skb->dev = dev;
+				skb_reserve(skb, 2);	/* 16 byte align the IP header */
+				/* Call copy + cksum if available. */
+#if HAS_IP_COPYSUM
+				eth_copy_and_sum(skb, np->rx_skbuff[entry]->tail, pkt_len, 0);
+				skb_put(skb, pkt_len);
+#else
+				memcpy(skb_put(skb, pkt_len), np->rx_skbuff[entry]->tail,
+					   pkt_len);
+#endif
+			} else {
+				char *temp = skb_put(skb = np->rx_skbuff[entry], pkt_len);
+				np->rx_skbuff[entry] = NULL;
+#ifndef final_version				/* Remove after testing. */
+				if (bus_to_virt(desc->buffer1) != temp)
+					printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
+						   "do not match in netdev_rx: %p vs. %p / %p.\n",
+						   dev->name, bus_to_virt(desc->buffer1),
+						   skb->head, temp);
+#endif
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+			dev->last_rx = jiffies;
+			np->stats.rx_packets++;
+#if LINUX_VERSION_CODE > 0x20127
+			np->stats.rx_bytes += pkt_len;
+#endif
+		}
+		entry = (++np->cur_rx) % np->rx_ring_size;
+		np->rx_head_desc = &np->rx_ring[entry];
+	}
+
+	/* Refill the Rx ring buffers. */
+	for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) {
+		struct sk_buff *skb;
+		entry = np->dirty_rx % np->rx_ring_size;
+		if (np->rx_skbuff[entry] == NULL) {
+			skb = dev_alloc_skb(np->rx_buf_sz);
+			np->rx_skbuff[entry] = skb;
+			if (skb == NULL)
+				break;				/* Better luck next round. */
+			skb->dev = dev;			/* Mark as being used by this device. */
+			np->rx_ring[entry].buffer1 = virt_to_bus(skb->tail);
+		}
+		np->rx_ring[entry].status = DescOwn;
+	}
+
+	return 0;
+}
+
+static void netdev_error(struct net_device *dev, int intr_status)
+{
+	long ioaddr = dev->base_addr;
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+
+	if (np->msg_level & NETIF_MSG_MISC)
+		printk(KERN_DEBUG "%s: Abnormal event, %8.8x.\n",
+			   dev->name, intr_status);
+	if (intr_status == 0xffffffff)
+		return;
+	if (intr_status & TxFIFOUnderflow) {
+		np->csr6 += 0x4000;	/* Bump up the Tx threshold */
+		if (np->msg_level & NETIF_MSG_TX_ERR)
+			printk(KERN_DEBUG "%s: Tx underflow, increasing threshold to "
+				   "%8.8x.\n", dev->name, np->csr6);
+		writel(np->csr6, ioaddr + NetworkConfig);
+	}
+	if (intr_status & IntrRxDied) {		/* Missed a Rx frame. */
+		np->stats.rx_errors++;
+	}
+	if (intr_status & TimerInt) {
+		/* Re-enable other interrupts. */
+		writel(0x1A0F5, ioaddr + IntrEnable);
+	}
+	np->stats.rx_missed_errors += readl(ioaddr + RxMissed) & 0xffff;
+	writel(0, ioaddr + RxStartDemand);
+}
+
+static struct net_device_stats *get_stats(struct net_device *dev)
+{
+	long ioaddr = dev->base_addr;
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+
+	/* The chip only need report frame silently dropped. */
+	if (netif_running(dev))
+		np->stats.rx_missed_errors += readl(ioaddr + RxMissed) & 0xffff;
+
+	return &np->stats;
+}
+
+static unsigned const ethernet_polynomial = 0x04c11db7U;
+static inline u32 ether_crc(int length, unsigned char *data)
+{
+    int crc = -1;
+
+    while(--length >= 0) {
+		unsigned char current_octet = *data++;
+		int bit;
+		for (bit = 0; bit < 8; bit++, current_octet >>= 1) {
+			crc = (crc << 1) ^
+				((crc < 0) ^ (current_octet & 1) ? ethernet_polynomial : 0);
+		}
+    }
+    return crc;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	long ioaddr = dev->base_addr;
+	u32 mc_filter[2];			/* Multicast hash filter */
+	u32 rx_mode;
+
+	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
+		/* Unconditionally log net taps. */
+		printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
+		memset(mc_filter, ~0, sizeof(mc_filter));
+		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAllPhys;
+	} else if ((dev->mc_count > np->multicast_filter_limit)
+			   ||  (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to match, or accept all multicasts. */
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		rx_mode = AcceptBroadcast | AcceptMulticast;
+	} else {
+		struct dev_mc_list *mclist;
+		int i;
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+			 i++, mclist = mclist->next) {
+			set_bit((ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F,
+					mc_filter);
+		}
+		rx_mode = AcceptBroadcast | AcceptMulticast;
+	}
+	writel(mc_filter[0], ioaddr + MulticastFilter0);
+	writel(mc_filter[1], ioaddr + MulticastFilter1);
+	np->csr6 &= ~0x00F8;
+	np->csr6 |= rx_mode;
+	writel(np->csr6, ioaddr + NetworkConfig);
+}
+
+static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	u16 *data = (u16 *)&rq->ifr_data;
+	u32 *data32 = (void *)&rq->ifr_data;
+
+	switch(cmd) {
+	case 0x8947: case 0x89F0:
+		/* SIOCGMIIPHY: Get the address of the PHY in use. */
+		data[0] = np->phys[0] & 0x1f;
+		/* Fall Through */
+	case 0x8948: case 0x89F1:
+		/* SIOCGMIIREG: Read the specified MII register. */
+		data[3] = mdio_read(dev, data[0] & 0x1f, data[1] & 0x1f);
+		return 0;
+	case 0x8949: case 0x89F2:
+		/* SIOCSMIIREG: Write the specified MII register */
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (data[0] == np->phys[0]) {
+			u16 value = data[2];
+			switch (data[1]) {
+			case 0:
+				/* Check for autonegotiation on or reset. */
+				np->medialock = (value & 0x9000) ? 0 : 1;
+				if (np->medialock)
+					np->full_duplex = (value & 0x0100) ? 1 : 0;
+				break;
+			case 4: np->advertising = value; break;
+			}
+			/* Perhaps check_duplex(dev), depending on chip semantics. */
+		}
+		mdio_write(dev, data[0] & 0x1f, data[1] & 0x1f, data[2]);
+		return 0;
+	case SIOCGPARAMS:
+		data32[0] = np->msg_level;
+		data32[1] = np->multicast_filter_limit;
+		data32[2] = np->max_interrupt_work;
+		data32[3] = np->rx_copybreak;
+		return 0;
+	case SIOCSPARAMS:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		np->msg_level = data32[0];
+		np->multicast_filter_limit = data32[1];
+		np->max_interrupt_work = data32[2];
+		np->rx_copybreak = data32[3];
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+
+static void empty_rings(struct net_device *dev)
+{
+	struct netdev_private *np = (void *)dev->priv;
+	int i;
+
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < np->rx_ring_size; i++) {
+		np->rx_ring[i].status = 0;
+		if (np->rx_skbuff[i]) {
+#if LINUX_VERSION_CODE < 0x20100
+			np->rx_skbuff[i]->free = 1;
+#endif
+			dev_free_skb(np->rx_skbuff[i]);
+		}
+		np->rx_skbuff[i] = 0;
+	}
+	for (i = 0; i < np->tx_ring_size; i++) {
+		if (np->tx_skbuff[i])
+			dev_free_skb(np->tx_skbuff[i]);
+		np->tx_skbuff[i] = 0;
+	}
+}
+
+static int netdev_close(struct net_device *dev)
+{
+	long ioaddr = dev->base_addr;
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+
+	netif_stop_tx_queue(dev);
+
+	if (np->msg_level & NETIF_MSG_IFDOWN) {
+		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %8.8x "
+			   "Config %8.8x.\n", dev->name, (int)readl(ioaddr + IntrStatus),
+			   (int)readl(ioaddr + NetworkConfig));
+		printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d,  Rx %d / %d.\n",
+			   dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx);
+	}
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	writel(0x0000, ioaddr + IntrEnable);
+
+	/* Stop the chip's Tx and Rx processes. */
+	writel(np->csr6 &= ~0x20FA, ioaddr + NetworkConfig);
+
+	del_timer(&np->timer);
+	if (readl(ioaddr + NetworkConfig) != 0xffffffff)
+		np->stats.rx_missed_errors += readl(ioaddr + RxMissed) & 0xffff;
+
+#ifdef __i386__
+	if (np->msg_level & NETIF_MSG_IFDOWN) {
+		int i;
+		printk("\n"KERN_DEBUG"  Tx ring at %8.8x:\n",
+			   (int)virt_to_bus(np->tx_ring));
+		for (i = 0; i < np->tx_ring_size; i++)
+			printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
+				   i, np->tx_ring[i].length,
+				   np->tx_ring[i].status, np->tx_ring[i].buffer1);
+		printk(KERN_DEBUG "\n" KERN_DEBUG "  Rx ring %8.8x:\n",
+			   (int)virt_to_bus(np->rx_ring));
+		for (i = 0; i < np->rx_ring_size; i++) {
+			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
+				   i, np->rx_ring[i].length,
+				   np->rx_ring[i].status, np->rx_ring[i].buffer1);
+		}
+	}
+#endif /* __i386__ debugging only */
+
+	free_irq(dev->irq, dev);
+	empty_rings(dev);
+
+	MOD_DEC_USE_COUNT;
+
+	return 0;
+}
+
+static int winbond_pwr_event(void *dev_instance, int event)
+{
+	struct net_device *dev = dev_instance;
+	struct netdev_private *np = (struct netdev_private *)dev->priv;
+	long ioaddr = dev->base_addr;
+
+	if (np->msg_level & NETIF_MSG_LINK)
+		printk(KERN_DEBUG "%s: Handling power event %d.\n", dev->name, event);
+	switch(event) {
+	case DRV_ATTACH:
+		MOD_INC_USE_COUNT;
+		break;
+	case DRV_SUSPEND: {
+		int csr6 = readl(ioaddr + NetworkConfig);
+		/* Disable interrupts, stop the chip, gather stats. */
+		if (csr6 != 0xffffffff) {
+			int csr8 = readl(ioaddr + RxMissed);
+			writel(0x00000000, ioaddr + IntrEnable);
+			writel(csr6 & ~TxOn & ~RxOn, ioaddr + NetworkConfig);
+			np->stats.rx_missed_errors += (unsigned short)csr8;
+		}
+		empty_rings(dev);
+		break;
+	}
+	case DRV_RESUME:
+		writel(np->csr0, ioaddr + PCIBusCfg);
+		init_ring(dev);
+		writel(virt_to_bus(np->rx_ring), ioaddr + RxRingPtr);
+		writel(virt_to_bus(np->tx_ring), ioaddr + TxRingPtr);
+		writel(0x1A0F5, ioaddr + IntrStatus);
+		writel(0x1A0F5, ioaddr + IntrEnable);
+		writel(np->csr6 | TxOn | RxOn, ioaddr + NetworkConfig);
+		writel(0, ioaddr + RxStartDemand);		/* Rx poll demand */
+		set_rx_mode(dev);
+		break;
+	case DRV_DETACH: {
+		struct net_device **devp, **next;
+		if (dev->flags & IFF_UP) {
+			printk(KERN_ERR "%s: Winbond-840 NIC removed while still "
+				   "active.\n", dev->name);
+			dev_close(dev);
+			dev->flags &= ~(IFF_UP|IFF_RUNNING);
+		}
+		unregister_netdev(dev);
+		release_region(dev->base_addr, pci_id_tbl[np->chip_id].io_size);
+#ifndef USE_IO_OPS
+		iounmap((char *)dev->base_addr);
+#endif
+		for (devp = &root_net_dev; *devp; devp = next) {
+			next = &((struct netdev_private *)(*devp)->priv)->next_module;
+			if (*devp == dev) {
+				*devp = *next;
+				break;
+			}
+		}
+		if (np->priv_addr)
+			kfree(np->priv_addr);
+		kfree(dev);
+		MOD_DEC_USE_COUNT;
+		break;
+	}
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+
+#ifdef MODULE
+int init_module(void)
+{
+	if (debug >= NETIF_MSG_DRV)	/* Emit version even if no cards detected. */
+		printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
+	return pci_drv_register(&winbond840_drv_id, NULL);
+}
+
+void cleanup_module(void)
+{
+	struct net_device *next_dev;
+
+	pci_drv_unregister(&winbond840_drv_id);
+
+	/* No need to check MOD_IN_USE, as sys_delete_module() checks. */
+	while (root_net_dev) {
+		struct netdev_private *np = (void *)(root_net_dev->priv);
+		unregister_netdev(root_net_dev);
+#ifdef USE_IO_OPS
+		release_region(root_net_dev->base_addr,
+					   pci_id_tbl[np->chip_id].io_size);
+#else
+		iounmap((char *)(root_net_dev->base_addr));
+#endif
+		next_dev = np->next_module;
+		if (np->priv_addr)
+			kfree(np->priv_addr);
+		kfree(root_net_dev);
+		root_net_dev = next_dev;
+	}
+}
+#else
+int winbond840_probe(struct net_device *dev)
+{
+	if (pci_drv_register(&winbond840_drv_id, dev) < 0)
+		return -ENODEV;
+	printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
+	return 0;
+}
+#endif  /* MODULE */
+
+
+/*
+ * Local variables:
+ *  compile-command: "make KERNVER=`uname -r` winbond-840.o"
+ *  compile-cmd: "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c winbond-840.c"
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */