1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 1300 insertions, 0 deletions

diff --git a/linux/src/drivers/net/rtl8139.c b/linux/src/drivers/net/rtl8139.c
new file mode 100644
index 0000000..b5c355b
--- /dev/null
+++ b/linux/src/drivers/net/rtl8139.c
@@ -0,0 +1,1300 @@
+/* rtl8139.c: A RealTek RTL8129/8139 Fast Ethernet driver for Linux. */
+/*
+	Written 1997-1998 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU Public License, incorporated herein by reference.
+    All other rights reserved.
+
+	This driver is for boards based on the RTL8129 and RTL8139 PCI ethernet
+	chips.
+
+	The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
+	Center of Excellence in Space Data and Information Sciences
+	   Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
+
+	Support and updates available at
+	http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
+
+	Twister-tuning code contributed by Kinston <shangh@realtek.com.tw>.
+*/
+
+static const char *version =
+"rtl8139.c:v0.99B 4/7/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html\n";
+
+/* A few user-configurable values. */
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 10;
+
+/* Size of the in-memory receive ring. */
+#define RX_BUF_LEN_IDX	3			/* 0==8K, 1==16K, 2==32K, 3==64K */
+#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE	1536
+
+/* PCI Tuning Parameters
+   Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256	/* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024. */
+#define RX_FIFO_THRESH	4		/* Rx buffer level before first PCI xfer.  */
+#define RX_DMA_BURST	4		/* Maximum PCI burst, '4' is 256 bytes */
+#define TX_DMA_BURST	4
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  ((4000*HZ)/1000)
+
+#ifdef MODULE
+#ifdef MODVERSIONS
+#include <linux/modversions.h>
+#endif
+#include <linux/module.h>
+#include <linux/version.h>
+#else
+#define MOD_INC_USE_COUNT
+#define MOD_DEC_USE_COUNT
+#endif
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/malloc.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/bios32.h>
+#include <asm/processor.h>		/* Processor type for cache alignment. */
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#define RUN_AT(x) (jiffies + (x))
+
+#include <linux/delay.h>
+
+#if (LINUX_VERSION_CODE < 0x20123)
+#define test_and_set_bit(val, addr) set_bit(val, addr)
+#endif
+
+/* The I/O extent. */
+#define RTL8129_TOTAL_SIZE 0x80
+
+#ifdef HAVE_DEVLIST
+struct netdev_entry rtl8139_drv =
+{"RTL8139", rtl8139_probe, RTL8129_TOTAL_SIZE, NULL};
+#endif
+
+static int rtl8129_debug = 1;
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the RealTek RTL8129, the RealTek Fast
+Ethernet controllers for PCI.  This chip is used on a few clone boards.
+
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board.  The system BIOS will assign the
+PCI INTA signal to a (preferably otherwise unused) system IRQ line.
+Note: Kernel versions earlier than 1.3.73 do not support shared PCI
+interrupt lines.
+
+III. Driver operation
+
+IIIa. Rx Ring buffers
+
+The receive unit uses a single linear ring buffer rather than the more
+common (and more efficient) descriptor-based architecture.  Incoming frames
+are sequentially stored into the Rx region, and the host copies them into
+skbuffs.
+
+Comment: While it is theoretically possible to process many frames in place,
+any delay in Rx processing would cause us to drop frames.  More importantly,
+the Linux protocol stack is not designed to operate in this manner.
+
+IIIb. Tx operation
+
+The RTL8129 uses a fixed set of four Tx descriptors in register space.
+In a stunningly bad design choice, Tx frames must be 32 bit aligned.  Linux
+aligns the IP header on word boundaries, and 14 byte ethernet header means
+that almost all frames will need to be copied to an alignment buffer.
+
+IVb. References
+
+http://www.realtek.com.tw/cn/cn.html
+http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+
+IVc. Errata
+
+*/
+
+#ifndef PCI_VENDOR_ID_REALTEK
+#define PCI_VENDOR_ID_REALTEK		0x10ec
+#endif
+#ifndef PCI_DEVICE_ID_REALTEK_8129
+#define PCI_DEVICE_ID_REALTEK_8129	0x8129
+#endif
+#ifndef PCI_DEVICE_ID_REALTEK_8139
+#define PCI_DEVICE_ID_REALTEK_8139	0x8139
+#endif
+
+/* The rest of these values should never change. */
+#define NUM_TX_DESC	4			/* Number of Tx descriptor registers. */
+
+/* Symbolic offsets to registers. */
+enum RTL8129_registers {
+	MAC0=0,						/* Ethernet hardware address. */
+	MAR0=8,						/* Multicast filter. */
+	TxStat0=0x10,				/* Transmit status (Four 32bit registers). */
+	TxAddr0=0x20,				/* Tx descriptors (also four 32bit). */
+	RxBuf=0x30, RxEarlyCnt=0x34, RxEarlyStatus=0x36,
+	ChipCmd=0x37, RxBufPtr=0x38, RxBufAddr=0x3A,
+	IntrMask=0x3C, IntrStatus=0x3E,
+	TxConfig=0x40, RxConfig=0x44,
+	Timer=0x48,					/* A general-purpose counter. */
+	RxMissed=0x4C,				/* 24 bits valid, write clears. */
+	Cfg9346=0x50, Config0=0x51, Config1=0x52,
+	FlashReg=0x54, GPPinData=0x58, GPPinDir=0x59, MII_SMI=0x5A, HltClk=0x5B,
+	MultiIntr=0x5C, TxSummary=0x60,
+	BMCR=0x62, BMSR=0x64, NWayAdvert=0x66, NWayLPAR=0x68, NWayExpansion=0x6A,
+	/* Undocumented registers, but required for proper operation. */
+	FIFOTMS=0x70,	/* FIFO Test Mode Select */
+	CSCR=0x74,	/* Chip Status and Configuration Register. */
+	PARA78=0x78, PARA7c=0x7c,	/* Magic transceiver parameter register. */
+};
+
+enum ChipCmdBits {
+	CmdReset=0x10, CmdRxEnb=0x08, CmdTxEnb=0x04, RxBufEmpty=0x01, };
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+	PCIErr=0x8000, PCSTimeout=0x4000,
+	RxFIFOOver=0x40, RxUnderrun=0x20, RxOverflow=0x10,
+	TxErr=0x08, TxOK=0x04, RxErr=0x02, RxOK=0x01,
+};
+enum TxStatusBits {
+	TxHostOwns=0x2000, TxUnderrun=0x4000, TxStatOK=0x8000,
+	TxOutOfWindow=0x20000000, TxAborted=0x40000000, TxCarrierLost=0x80000000,
+};
+enum RxStatusBits {
+	RxMulticast=0x8000, RxPhysical=0x4000, RxBroadcast=0x2000,
+	RxBadSymbol=0x0020, RxRunt=0x0010, RxTooLong=0x0008, RxCRCErr=0x0004,
+	RxBadAlign=0x0002, RxStatusOK=0x0001,
+};
+
+enum CSCRBits {
+	CSCR_LinkOKBit=0x0400, CSCR_LinkChangeBit=0x0800,
+	CSCR_LinkStatusBits=0x0f000, CSCR_LinkDownOffCmd=0x003c0,
+	CSCR_LinkDownCmd=0x0f3c0,
+};	
+
+/* Twister tuning parameters from RealTek.  Completely undocumented. */
+unsigned long param[4][4]={
+	{0x0cb39de43,0x0cb39ce43,0x0fb38de03,0x0cb38de43},
+	{0x0cb39de43,0x0cb39ce43,0x0cb39ce83,0x0cb39ce83},
+	{0x0cb39de43,0x0cb39ce43,0x0cb39ce83,0x0cb39ce83},
+	{0x0bb39de43,0x0bb39ce43,0x0bb39ce83,0x0bb39ce83}
+};
+
+struct rtl8129_private {
+	char devname[8];			/* Used only for kernel debugging. */
+	const char *product_name;
+	struct device *next_module;
+	int chip_id;
+	int chip_revision;
+#if LINUX_VERSION_CODE > 0x20139
+	struct net_device_stats stats;
+#else
+	struct enet_statistics stats;
+#endif
+	struct timer_list timer;	/* Media selection timer. */
+	unsigned int cur_rx, cur_tx;		/* The next free and used entries */
+	unsigned int dirty_rx, dirty_tx;
+	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
+	struct sk_buff* tx_skbuff[NUM_TX_DESC];
+	unsigned char *tx_buf[NUM_TX_DESC];	/* Tx bounce buffers */
+	unsigned char *rx_ring;
+	unsigned char *tx_bufs;				/* Tx bounce buffer region. */
+	unsigned char mc_filter[8];			/* Current multicast filter. */
+	char phys[4];						/* MII device addresses. */
+	int in_interrupt;					/* Alpha needs word-wide lock. */
+	unsigned int tx_full:1;				/* The Tx queue is full. */
+	unsigned int full_duplex:1;			/* Full-duplex operation requested. */
+	unsigned int default_port:4;		/* Last dev->if_port value. */
+	unsigned int media2:4;				/* Secondary monitored media port. */
+	unsigned int medialock:1;			/* Don't sense media type. */
+	unsigned int mediasense:1;			/* Media sensing in progress. */
+};
+
+#ifdef MODULE
+/* Used to pass the full-duplex flag, etc. */
+static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+#if LINUX_VERSION_CODE > 0x20118
+MODULE_AUTHOR("Donald Becker <becker@cesdis.gsfc.nasa.gov>");
+MODULE_DESCRIPTION("RealTek RTL8129/8139 Fast Ethernet driver");
+MODULE_PARM(debug, "i");
+MODULE_PARM(options, "1-" __MODULE_STRING(8) "i");
+MODULE_PARM(full_duplex, "1-" __MODULE_STRING(8) "i");
+MODULE_PARM(max_interrupt_work, "i");
+#endif
+#endif
+
+static struct device *rtl8129_probe1(struct device *dev, int ioaddr, int irq,
+									 int chip_id, int options, int card_idx);
+static int rtl8129_open(struct device *dev);
+static int read_eeprom(int ioaddr, int location);
+static int mdio_read(int ioaddr, int phy_id, int location);
+static void rtl8129_timer(unsigned long data);
+static void rtl8129_tx_timeout(struct device *dev);
+static void rtl8129_init_ring(struct device *dev);
+static int rtl8129_start_xmit(struct sk_buff *skb, struct device *dev);
+static int rtl8129_rx(struct device *dev);
+static void rtl8129_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int rtl8129_close(struct device *dev);
+static struct enet_statistics *rtl8129_get_stats(struct device *dev);
+static void set_rx_mode(struct device *dev);
+
+
+#ifdef MODULE
+/* A list of all installed RTL8129 devices, for removing the driver module. */
+static struct device *root_rtl8129_dev = NULL;
+#endif
+
+int rtl8139_probe(struct device *dev)
+{
+	int cards_found = 0;
+	static int pci_index = 0;	/* Static, for multiple probe calls. */
+
+	/* Ideally we would detect all network cards in slot order.  That would
+	   be best done a central PCI probe dispatch, which wouldn't work
+	   well with the current structure.  So instead we detect just the
+	   Rtl81*9 cards in slot order. */
+
+	if (pcibios_present()) {
+		unsigned char pci_bus, pci_device_fn;
+
+		for (;pci_index < 0xff; pci_index++) {
+			u8 pci_irq_line, pci_latency;
+			u16 pci_command, new_command, vendor, device;
+			u32 pci_ioaddr;
+
+			if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8,
+#ifdef REVERSE_PROBE_ORDER
+									0xff - pci_index,
+#else
+									pci_index,
+#endif
+									&pci_bus, &pci_device_fn)
+				!= PCIBIOS_SUCCESSFUL)
+				break;
+			pcibios_read_config_word(pci_bus, pci_device_fn,
+									 PCI_VENDOR_ID, &vendor);
+			if (vendor != PCI_VENDOR_ID_REALTEK)
+				continue;
+
+			pcibios_read_config_word(pci_bus, pci_device_fn,
+									 PCI_DEVICE_ID, &device);
+			pcibios_read_config_byte(pci_bus, pci_device_fn,
+									 PCI_INTERRUPT_LINE, &pci_irq_line);
+			pcibios_read_config_dword(pci_bus, pci_device_fn,
+									  PCI_BASE_ADDRESS_0, &pci_ioaddr);
+			/* Remove I/O space marker in bit 0. */
+			pci_ioaddr &= ~3;
+
+			if (device != PCI_DEVICE_ID_REALTEK_8129
+				&&  device != PCI_DEVICE_ID_REALTEK_8139) {
+				printk(KERN_NOTICE "Unknown RealTek PCI ethernet chip type "
+					   "%4.4x detected: not configured.\n", device);
+				continue;
+			}
+			if (check_region(pci_ioaddr, RTL8129_TOTAL_SIZE))
+				continue;
+
+			/* Activate the card: fix for brain-damaged Win98 BIOSes. */
+			pcibios_read_config_word(pci_bus, pci_device_fn,
+									 PCI_COMMAND, &pci_command);
+			new_command = pci_command | PCI_COMMAND_MASTER|PCI_COMMAND_IO;
+			if (pci_command != new_command) {
+				printk(KERN_INFO "  The PCI BIOS has not enabled this"
+					   " device!  Updating PCI config %4.4x->%4.4x.\n",
+					   pci_command, new_command);
+				pcibios_write_config_word(pci_bus, pci_device_fn,
+										  PCI_COMMAND, new_command);
+			}
+
+#ifdef MODULE
+			dev = rtl8129_probe1(dev, pci_ioaddr, pci_irq_line, device,
+								 options[cards_found], cards_found);
+#else
+			dev = rtl8129_probe1(dev, pci_ioaddr, pci_irq_line, device,
+								 dev ? dev->mem_start : 0, -1);
+#endif
+
+			if (dev) {
+				pcibios_read_config_byte(pci_bus, pci_device_fn,
+										 PCI_LATENCY_TIMER, &pci_latency);
+				if (pci_latency < 32) {
+					printk(KERN_NOTICE"  PCI latency timer (CFLT) is "
+						   "unreasonably low at %d.  Setting to 64 clocks.\n",
+						   pci_latency);
+					pcibios_write_config_byte(pci_bus, pci_device_fn,
+											  PCI_LATENCY_TIMER, 64);
+				} else if (rtl8129_debug > 1)
+					printk(KERN_INFO"  PCI latency timer (CFLT) is %#x.\n",
+						   pci_latency);
+				dev = 0;
+				cards_found++;
+			}
+		}
+	}
+
+#if defined (MODULE)
+	return cards_found;
+#else
+	return cards_found ? 0 : -ENODEV;
+#endif
+}
+
+static struct device *rtl8129_probe1(struct device *dev, int ioaddr, int irq,
+								   int chip_id, int options, int card_idx)
+{
+	static int did_version = 0;			/* Already printed version info. */
+	struct rtl8129_private *tp;
+	int i;
+
+	if (rtl8129_debug > 0  &&  did_version++ == 0)
+		printk(KERN_INFO "%s", version);
+
+	dev = init_etherdev(dev, 0);
+
+	printk(KERN_INFO "%s: RealTek RTL%x at %#3x, IRQ %d, ",
+		   dev->name, chip_id, ioaddr, irq);
+
+	/* Bring the chip out of low-power mode. */
+	outb(0x00, ioaddr + Config1);
+
+	/* Perhaps this should be read from the EEPROM? */
+	for (i = 0; i < 6; i++)
+		dev->dev_addr[i] = inb(ioaddr + MAC0 + i);
+
+	for (i = 0; i < 5; i++)
+		printk("%2.2x:", dev->dev_addr[i]);
+	printk("%2.2x.\n", dev->dev_addr[i]);
+
+	if (rtl8129_debug > 1) {
+		printk(KERN_INFO "%s: EEPROM contents\n", dev->name);
+		for (i = 0; i < 64; i++)
+			printk(" %4.4x%s", read_eeprom(ioaddr, i),
+				   i%16 == 15 ? "\n"KERN_INFO : "");
+	}
+
+	/* We do a request_region() to register /proc/ioports info. */
+	request_region(ioaddr, RTL8129_TOTAL_SIZE, "RealTek RTL8129/39 Fast Ethernet");
+
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+
+	/* Some data structures must be quadword aligned. */
+	tp = kmalloc(sizeof(*tp), GFP_KERNEL | GFP_DMA);
+	memset(tp, 0, sizeof(*tp));
+	dev->priv = tp;
+
+#ifdef MODULE
+	tp->next_module = root_rtl8129_dev;
+	root_rtl8129_dev = dev;
+#endif
+
+	tp->chip_id = chip_id;
+
+	/* Find the connected MII xcvrs.
+	   Doing this in open() would allow detecting external xcvrs later, but
+	   takes too much time. */
+	if (chip_id == 0x8129) {
+		int phy, phy_idx;
+		for (phy = 0, phy_idx = 0; phy < 32 && phy_idx < sizeof(tp->phys);
+			 phy++) {
+			int mii_status = mdio_read(ioaddr, phy, 1);
+
+			if (mii_status != 0xffff  && mii_status != 0x0000) {
+				tp->phys[phy_idx++] = phy;
+				printk(KERN_INFO "%s: MII transceiver found at address %d.\n",
+					   dev->name, phy);
+			}
+		}
+		if (phy_idx == 0) {
+			printk(KERN_INFO "%s: No MII transceivers found!  Assuming SYM "
+				   "transceiver.\n",
+				   dev->name);
+			tp->phys[0] = -1;
+		}
+	} else {
+			tp->phys[0] = -1;
+	}
+
+	/* Put the chip into low-power mode. */
+	outb(0xC0, ioaddr + Cfg9346);
+	outb(0x03, ioaddr + Config1);
+	outb('H', ioaddr + HltClk);		/* 'R' would leave the clock running. */
+
+	/* The lower four bits are the media type. */
+	if (options > 0) {
+		tp->full_duplex = (options & 16) ? 1 : 0;
+		tp->default_port = options & 15;
+		if (tp->default_port)
+			tp->medialock = 1;
+	}
+#ifdef MODULE
+	if (card_idx >= 0) {
+		if (full_duplex[card_idx] >= 0)
+			tp->full_duplex = full_duplex[card_idx];
+	}
+#endif
+
+	/* The Rtl8129-specific entries in the device structure. */
+	dev->open = &rtl8129_open;
+	dev->hard_start_xmit = &rtl8129_start_xmit;
+	dev->stop = &rtl8129_close;
+	dev->get_stats = &rtl8129_get_stats;
+	dev->set_multicast_list = &set_rx_mode;
+
+	return dev;
+}
+
+/* Serial EEPROM section. */
+
+/*  EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
+#define EE_CS			0x08	/* EEPROM chip select. */
+#define EE_DATA_WRITE	0x02	/* EEPROM chip data in. */
+#define EE_WRITE_0		0x00
+#define EE_WRITE_1		0x02
+#define EE_DATA_READ	0x01	/* EEPROM chip data out. */
+#define EE_ENB			(0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+   No extra delay is needed with 33Mhz PCI, but 66Mhz is untested.
+ */
+
+#ifdef _LINUX_DELAY_H
+#define eeprom_delay(nanosec)	udelay(1)
+#else
+#define eeprom_delay(nanosec)	do { ; } while (0)
+#endif
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD	(5 << 6)
+#define EE_READ_CMD		(6 << 6)
+#define EE_ERASE_CMD	(7 << 6)
+
+static int read_eeprom(int ioaddr, int location)
+{
+	int i;
+	unsigned retval = 0;
+	int ee_addr = ioaddr + Cfg9346;
+	int read_cmd = location | EE_READ_CMD;
+
+	outb(EE_ENB & ~EE_CS, ee_addr);
+	outb(EE_ENB, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 10; i >= 0; i--) {
+		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+		outb(EE_ENB | dataval, ee_addr);
+		eeprom_delay(100);
+		outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+		eeprom_delay(150);
+		outb(EE_ENB | dataval, ee_addr);	/* Finish EEPROM a clock tick. */
+		eeprom_delay(250);
+	}
+	outb(EE_ENB, ee_addr);
+
+	for (i = 16; i > 0; i--) {
+		outb(EE_ENB | EE_SHIFT_CLK, ee_addr);
+		eeprom_delay(100);
+		retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0);
+		outb(EE_ENB, ee_addr);
+		eeprom_delay(100);
+	}
+
+	/* Terminate the EEPROM access. */
+	outb(~EE_CS, ee_addr);
+	return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+   serial MDIO protocol.
+   The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+   "overclocking" issues. */
+#define MDIO_DIR		0x80
+#define MDIO_DATA_OUT	0x04
+#define MDIO_DATA_IN	0x02
+#define MDIO_CLK		0x01
+#ifdef _LINUX_DELAY_H
+#define mdio_delay()	udelay(1) /* Really 400ns. */
+#else
+#define mdio_delay()	do { ; } while (0)
+#endif
+
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync(int ioaddr)
+{
+	int i;
+	int mdio_addr = ioaddr + MII_SMI;
+
+	for (i = 32; i >= 0; i--) {
+		outb(MDIO_DIR | MDIO_DATA_OUT, mdio_addr);
+		mdio_delay();
+		outb(MDIO_DIR | MDIO_DATA_OUT | MDIO_CLK, mdio_addr);
+		mdio_delay();
+	}
+	return;
+}
+static int mdio_read(int ioaddr, int phy_id, int location)
+{
+	int i;
+	int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	int retval = 0;
+	int mdio_addr = ioaddr + MII_SMI;
+
+	mdio_sync(ioaddr);
+	/* Shift the read command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval =
+		  (read_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+		outb(MDIO_DIR | dataval, mdio_addr);
+		mdio_delay();
+		outb(MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
+		mdio_delay();
+	}
+
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		outb(0, mdio_addr);
+		mdio_delay();
+		retval = (retval << 1) | ((inb(mdio_addr) & MDIO_DATA_IN) ? 1 : 0);
+		outb(MDIO_CLK, mdio_addr);
+		mdio_delay();
+	}
+	return (retval>>1) & 0xffff;
+}
+
+static int
+rtl8129_open(struct device *dev)
+{
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int i;
+	int full_duplex = 0;
+
+	/* Soft reset the chip. */
+	outb(CmdReset, ioaddr + ChipCmd);
+
+	if (request_irq(dev->irq, &rtl8129_interrupt, SA_SHIRQ, dev->name, dev)) {
+		return -EAGAIN;
+	}
+
+	MOD_INC_USE_COUNT;
+
+	tp->tx_bufs = kmalloc(TX_BUF_SIZE * NUM_TX_DESC, GFP_KERNEL);
+	tp->rx_ring = kmalloc(RX_BUF_LEN + 16, GFP_KERNEL);
+	if (tp->tx_bufs == NULL ||  tp->rx_ring == NULL) {
+		if (tp->tx_bufs)
+			kfree(tp->tx_bufs);
+		if (rtl8129_debug > 0)
+			printk(KERN_ERR "%s: Couldn't allocate a %d byte receive ring.\n",
+				   dev->name, RX_BUF_LEN);
+		return -ENOMEM;
+	}
+	rtl8129_init_ring(dev);
+
+	/* Check that the chip has finished the reset. */
+	for (i = 1000; i > 0; i--)
+		if ((inb(ioaddr + ChipCmd) & CmdReset) == 0)
+			break;
+
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + MAC0 + i);
+
+	/* Must enable Tx/Rx before setting transfer thresholds! */
+	outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+	outl((RX_FIFO_THRESH << 13) | (RX_BUF_LEN_IDX << 11) | (RX_DMA_BURST<<8),
+		 ioaddr + RxConfig);
+	outl((TX_DMA_BURST<<8)|0x03000000, ioaddr + TxConfig);
+
+	full_duplex = tp->full_duplex;
+	if (tp->phys[0] >= 0  ||  tp->chip_id == 0x8139) {
+		u16 mii_reg5;
+		if (tp->chip_id == 0x8139)
+			mii_reg5 = inw(ioaddr + NWayLPAR);
+		else
+			mii_reg5 = mdio_read(ioaddr, tp->phys[0], 5);
+		if (mii_reg5 == 0xffff)
+			;					/* Not there */
+		else if ((mii_reg5 & 0x0100) == 0x0100
+				 || (mii_reg5 & 0x00C0) == 0x0040)
+			full_duplex = 1;
+		if (rtl8129_debug > 1)
+			printk(KERN_INFO"%s: Setting %s%s-duplex based on"
+				   " auto-negotiated partner ability %4.4x.\n", dev->name,
+				   mii_reg5 == 0 ? "" :
+				   (mii_reg5 & 0x0180) ? "100mbps " : "10mbps ",
+				   full_duplex ? "full" : "half", mii_reg5);
+	}
+
+	outb(0xC0, ioaddr + Cfg9346);
+	outb(full_duplex ? 0x60 : 0x20, ioaddr + Config1);
+	outb(0x00, ioaddr + Cfg9346);
+
+	outl(virt_to_bus(tp->rx_ring), ioaddr + RxBuf);
+
+	/* Start the chip's Tx and Rx process. */
+	outl(0, ioaddr + RxMissed);
+	set_rx_mode(dev);
+
+	outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+
+	dev->tbusy = 0;
+	dev->interrupt = 0;
+	dev->start = 1;
+
+	/* Enable all known interrupts by setting the interrupt mask. */
+	outw(PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver
+		| TxErr | TxOK | RxErr | RxOK, ioaddr + IntrMask);
+
+	if (rtl8129_debug > 1)
+		printk(KERN_DEBUG"%s: rtl8129_open() ioaddr %4.4x IRQ %d"
+			   " GP Pins %2.2x %s-duplex.\n",
+			   dev->name, ioaddr, dev->irq, inb(ioaddr + GPPinData),
+			   full_duplex ? "full" : "half");
+
+	/* Set the timer to switch to check for link beat and perhaps switch
+	   to an alternate media type. */
+	init_timer(&tp->timer);
+	tp->timer.expires = RUN_AT((24*HZ)/10);			/* 2.4 sec. */
+	tp->timer.data = (unsigned long)dev;
+	tp->timer.function = &rtl8129_timer;				/* timer handler */
+	add_timer(&tp->timer);
+
+	return 0;
+}
+
+static void rtl8129_timer(unsigned long data)
+{
+	struct device *dev = (struct device *)data;
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int next_tick = 0;
+
+	if (tp->chip_id == 0x8139) {
+		u16 mii_reg5 = inw(ioaddr + NWayLPAR);
+		if ((mii_reg5 & 0x0100) == 0x0100
+			|| (mii_reg5 & 0x00C0) == 0x0040)
+			if ( ! tp->full_duplex) {
+				tp->full_duplex = 1;
+				if (rtl8129_debug > 0)
+					printk(KERN_INFO "%s: Switching to full-duplex based on "
+						   "link partner ability of %4.4x.\n",
+						   dev->name, mii_reg5);
+				outb(0xC0, ioaddr + Cfg9346);
+				outb(tp->full_duplex ? 0x60 : 0x20, ioaddr + Config1);
+				outb(0x00, ioaddr + Cfg9346);
+			}
+	}
+	if (rtl8129_debug > 2) {
+		if (tp->chip_id == 0x8129)
+			printk(KERN_DEBUG"%s: Media selection tick, GP pins %2.2x.\n",
+				   dev->name, inb(ioaddr + GPPinData));
+		else
+			printk(KERN_DEBUG"%s: Media selection tick, Link partner %4.4x.\n",
+				   dev->name, inw(ioaddr + NWayLPAR));
+		printk(KERN_DEBUG"%s:  Other registers are IntMask %4.4x IntStatus %4.4x"
+			   " RxStatus %4.4x.\n",
+			   dev->name, inw(ioaddr + IntrMask), inw(ioaddr + IntrStatus),
+			   inl(ioaddr + RxEarlyStatus));
+		printk(KERN_DEBUG"%s:  Chip config %2.2x %2.2x.\n",
+			   dev->name, inb(ioaddr + Config0), inb(ioaddr + Config1));
+	}
+
+	if (next_tick) {
+		tp->timer.expires = RUN_AT(next_tick);
+		add_timer(&tp->timer);
+	}
+}
+
+static void rtl8129_tx_timeout(struct device *dev)
+{
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int i;
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	outw(0x0000, ioaddr + IntrMask);
+
+	if (rtl8129_debug > 0)
+		printk(KERN_WARNING "%s: Transmit timeout, status %2.2x %4.4x.\n",
+			   dev->name, inb(ioaddr + ChipCmd), inw(ioaddr + IntrStatus));
+	/* Emit info to figure out what went wrong. */
+	for (i = 0; i < NUM_TX_DESC; i++)
+		printk(KERN_DEBUG"%s:  Tx descriptor %d is %8.8x.%s\n",
+			   dev->name, i, inl(ioaddr + TxStat0 + i*4),
+			   i == tp->dirty_tx % NUM_TX_DESC ? " (queue head)" : "");
+	if (tp->chip_id == 0x8129) {
+		int mii_reg;
+		printk(KERN_DEBUG"%s: MII #%d registers are:", dev->name, tp->phys[0]);
+		for (mii_reg = 0; mii_reg < 8; mii_reg++)
+			printk(" %4.4x", mdio_read(ioaddr, tp->phys[0], mii_reg));
+		printk(".\n");
+	} else {
+		printk(KERN_DEBUG"%s: MII status register is %4.4x.\n",
+			   dev->name, inw(ioaddr + BMSR));
+	}
+
+	/* Soft reset the chip. */
+	outb(CmdReset, ioaddr + ChipCmd);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + MAC0 + i);
+
+	{							/* Save the unsent Tx packets. */
+		struct sk_buff *saved_skb[NUM_TX_DESC], *skb;
+		int j = 0;
+		for (; tp->cur_tx - tp->dirty_tx > 0 ; tp->dirty_tx++)
+			saved_skb[j++] = tp->tx_skbuff[tp->dirty_tx % NUM_TX_DESC];
+		tp->dirty_tx = tp->cur_tx = 0;
+
+		for (i = 0; i < j; i++) {
+			skb = tp->tx_skbuff[i] = saved_skb[i];
+			if ((long)skb->data & 3) {		/* Must use alignment buffer. */
+				memcpy(tp->tx_buf[i], skb->data, skb->len);
+				outl(virt_to_bus(tp->tx_buf[i]), ioaddr + TxAddr0 + i*4);
+			} else
+				outl(virt_to_bus(skb->data), ioaddr + TxAddr0 + i*4);
+			/* Note: the chip doesn't have auto-pad! */
+			outl(((TX_FIFO_THRESH<<11) & 0x003f0000) |
+				 (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN),
+				 ioaddr + TxStat0 + i*4);
+		}
+		tp->cur_tx = i;
+		while (i < NUM_TX_DESC)
+			tp->tx_skbuff[i] = 0;
+		if (tp->cur_tx - tp->dirty_tx < NUM_TX_DESC) {/* Typical path */
+			dev->tbusy = 0;
+		} else {
+			tp->tx_full = 1;
+		}
+	}
+
+	/* Must enable Tx/Rx before setting transfer thresholds! */
+	set_rx_mode(dev);
+	outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+	outl((RX_FIFO_THRESH << 13) | (RX_BUF_LEN_IDX << 11) | (RX_DMA_BURST<<8),
+		 ioaddr + RxConfig);
+	outl((TX_DMA_BURST<<8), ioaddr + TxConfig);
+
+	dev->trans_start = jiffies;
+	tp->stats.tx_errors++;
+	/* Enable all known interrupts by setting the interrupt mask. */
+	outw(PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver
+		 | TxErr | TxOK | RxErr | RxOK, ioaddr + IntrMask);
+	return;
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void
+rtl8129_init_ring(struct device *dev)
+{
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	int i;
+
+	tp->tx_full = 0;
+	tp->cur_rx = tp->cur_tx = 0;
+	tp->dirty_rx = tp->dirty_tx = 0;
+
+	for (i = 0; i < NUM_TX_DESC; i++) {
+		tp->tx_skbuff[i] = 0;
+		tp->tx_buf[i] = &tp->tx_bufs[i*TX_BUF_SIZE];
+	}
+}
+
+static int
+rtl8129_start_xmit(struct sk_buff *skb, struct device *dev)
+{
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int entry;
+
+	/* Block a timer-based transmit from overlapping.  This could better be
+	   done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
+	if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
+		if (jiffies - dev->trans_start < TX_TIMEOUT)
+			return 1;
+		rtl8129_tx_timeout(dev);
+		return 1;
+	}
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = tp->cur_tx % NUM_TX_DESC;
+
+	tp->tx_skbuff[entry] = skb;
+	if ((long)skb->data & 3) {			/* Must use alignment buffer. */
+		memcpy(tp->tx_buf[entry], skb->data, skb->len);
+		outl(virt_to_bus(tp->tx_buf[entry]), ioaddr + TxAddr0 + entry*4);
+	} else
+		outl(virt_to_bus(skb->data), ioaddr + TxAddr0 + entry*4);
+	/* Note: the chip doesn't have auto-pad! */
+	outl(((TX_FIFO_THRESH<<11) & 0x003f0000) |
+		 (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN),
+		 ioaddr + TxStat0 + entry*4);
+
+	if (++tp->cur_tx - tp->dirty_tx < NUM_TX_DESC) {/* Typical path */
+		dev->tbusy = 0;
+	} else {
+		tp->tx_full = 1;
+	}
+
+	dev->trans_start = jiffies;
+	if (rtl8129_debug > 4)
+		printk(KERN_DEBUG"%s: Queued Tx packet at %p size %ld to slot %d.\n",
+			   dev->name, skb->data, skb->len, entry);
+
+	return 0;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static void rtl8129_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	struct device *dev = (struct device *)dev_instance;
+	struct rtl8129_private *tp;
+	int ioaddr, boguscnt = max_interrupt_work;
+	int status;
+
+	if (dev == NULL) {
+		printk (KERN_ERR"rtl8139_interrupt(): IRQ %d for unknown device.\n",
+				irq);
+		return;
+	}
+
+	ioaddr = dev->base_addr;
+	tp = (struct rtl8129_private *)dev->priv;
+	if (test_and_set_bit(0, (void*)&tp->in_interrupt)) {
+		printk(KERN_ERR "%s: Re-entering the interrupt handler.\n", dev->name);
+		return;
+	}
+	dev->interrupt = 1;
+
+	do {
+		status = inw(ioaddr + IntrStatus);
+		/* Acknowledge all of the current interrupt sources ASAP. */
+		outw(status, ioaddr + IntrStatus);
+
+		if (rtl8129_debug > 4)
+			printk(KERN_DEBUG"%s: interrupt  status=%#4.4x new intstat=%#4.4x.\n",
+				   dev->name, status, inw(ioaddr + IntrStatus));
+
+		if ((status & (PCIErr|PCSTimeout|RxUnderrun|RxOverflow|RxFIFOOver
+					   |TxErr|TxOK|RxErr|RxOK)) == 0)
+			break;
+
+		if (status & (RxOK|RxUnderrun|RxOverflow|RxFIFOOver))/* Rx interrupt */
+			rtl8129_rx(dev);
+
+		if (status & (TxOK | TxErr)) {
+			unsigned int dirty_tx;
+
+			for (dirty_tx = tp->dirty_tx; dirty_tx < tp->cur_tx; dirty_tx++) {
+				int entry = dirty_tx % NUM_TX_DESC;
+				int txstatus = inl(ioaddr + TxStat0 + entry*4);
+
+				if ( ! (txstatus & TxHostOwns))
+					break;			/* It still hasn't been Txed */
+
+				/* Note: TxCarrierLost is always asserted at 100mbps. */
+				if (txstatus & (TxOutOfWindow | TxAborted)) {
+					/* There was an major error, log it. */
+#ifndef final_version
+					if (rtl8129_debug > 1)
+						printk(KERN_NOTICE"%s: Transmit error, Tx status %8.8x.\n",
+							   dev->name, txstatus);
+#endif
+					tp->stats.tx_errors++;
+					if (txstatus&TxAborted) {
+						tp->stats.tx_aborted_errors++;
+						outl((TX_DMA_BURST<<8)|0x03000001, ioaddr + TxConfig);
+					}
+					if (txstatus&TxCarrierLost) tp->stats.tx_carrier_errors++;
+					if (txstatus&TxOutOfWindow) tp->stats.tx_window_errors++;
+#ifdef ETHER_STATS
+					if ((txstatus & 0x0f000000) == 0x0f000000)
+						tp->stats.collisions16++;
+#endif
+				} else {
+#ifdef ETHER_STATS
+					/* No count for tp->stats.tx_deferred */
+#endif
+					if (txstatus & TxUnderrun) {
+						/* Todo: increase the Tx FIFO threshold. */
+						tp->stats.tx_fifo_errors++;
+					}
+					tp->stats.collisions += (txstatus >> 24) & 15;
+#if LINUX_VERSION_CODE > 0x20119
+					tp->stats.tx_bytes += txstatus & 0x7ff;
+#endif
+					tp->stats.tx_packets++;
+				}
+
+				/* Free the original skb. */
+				dev_kfree_skb(tp->tx_skbuff[entry], FREE_WRITE);
+				tp->tx_skbuff[entry] = 0;
+			}
+
+#ifndef final_version
+			if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+				printk(KERN_ERR"%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
+					   dev->name, dirty_tx, tp->cur_tx, tp->tx_full);
+				dirty_tx += NUM_TX_DESC;
+			}
+#endif
+
+			if (tp->tx_full && dev->tbusy
+				&& dirty_tx > tp->cur_tx - NUM_TX_DESC) {
+				/* The ring is no longer full, clear tbusy. */
+				tp->tx_full = 0;
+				dev->tbusy = 0;
+				mark_bh(NET_BH);
+			}
+
+			tp->dirty_tx = dirty_tx;
+		}
+
+		/* Check uncommon events with one test. */
+		if (status & (PCIErr|PCSTimeout |RxUnderrun|RxOverflow|RxFIFOOver
+					  |TxErr|RxErr)) {
+			/* Update the error count. */
+			tp->stats.rx_missed_errors += inl(ioaddr + RxMissed);
+			outl(0, ioaddr + RxMissed);
+
+			if (status & (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
+				tp->stats.rx_errors++;
+
+			if (status & (PCSTimeout)) tp->stats.rx_length_errors++;
+			if (status & (RxUnderrun|RxFIFOOver)) tp->stats.rx_fifo_errors++;
+			if (status & RxOverflow) {
+				tp->stats.rx_over_errors++;
+				tp->cur_rx = inw(ioaddr + RxBufAddr) % RX_BUF_LEN;
+				outw(tp->cur_rx - 16, ioaddr + RxBufPtr);
+			}
+			/* Error sources cleared above. */
+		}
+		if (--boguscnt < 0) {
+			printk(KERN_WARNING"%s: Too much work at interrupt, "
+				   "IntrStatus=0x%4.4x.\n",
+				   dev->name, status);
+			/* Clear all interrupt sources. */
+			outw(0xffff, ioaddr + IntrStatus);
+			break;
+		}
+	} while (1);
+
+	if (rtl8129_debug > 3)
+		printk(KERN_DEBUG"%s: exiting interrupt, intr_status=%#4.4x.\n",
+			   dev->name, inl(ioaddr + IntrStatus));
+
+	dev->interrupt = 0;
+	clear_bit(0, (void*)&tp->in_interrupt);
+	return;
+}
+
+/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the
+   field alignments and semantics. */
+static int
+rtl8129_rx(struct device *dev)
+{
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	unsigned char *rx_ring = tp->rx_ring;
+	u16 cur_rx = tp->cur_rx;
+
+	if (rtl8129_debug > 4)
+		printk(KERN_DEBUG"%s: In rtl8129_rx(), current %4.4x BufAddr %4.4x,"
+			   " free to %4.4x, Cmd %2.2x.\n",
+			   dev->name, cur_rx, inw(ioaddr + RxBufAddr),
+			   inw(ioaddr + RxBufPtr), inb(ioaddr + ChipCmd));
+
+	while ((inb(ioaddr + ChipCmd) & 1) == 0) {
+		int ring_offset = cur_rx % RX_BUF_LEN;
+		u32 rx_status = *(u32*)(rx_ring + ring_offset);
+		int rx_size = rx_status >> 16;
+
+		if (rtl8129_debug > 4) {
+			int i;
+			printk(KERN_DEBUG"%s:  rtl8129_rx() status %4.4x, size %4.4x, cur %4.4x.\n",
+				   dev->name, rx_status, rx_size, cur_rx);
+			printk(KERN_DEBUG"%s: Frame contents ", dev->name);
+			for (i = 0; i < 70; i++)
+				printk(" %2.2x", rx_ring[ring_offset + i]);
+			printk(".\n");
+		}
+		if (rx_status & RxTooLong) {
+			if (rtl8129_debug > 0)
+				printk(KERN_NOTICE"%s: Oversized Ethernet frame, status %4.4x!\n",
+					   dev->name, rx_status);
+			tp->stats.rx_length_errors++;
+		} else if (rx_status &
+				   (RxBadSymbol|RxRunt|RxTooLong|RxCRCErr|RxBadAlign)) {
+			if (rtl8129_debug > 1)
+				printk(KERN_DEBUG"%s: Ethernet frame had errors,"
+					   " status %4.4x.\n", dev->name, rx_status);
+			tp->stats.rx_errors++;
+			if (rx_status & (RxBadSymbol|RxBadAlign))
+				tp->stats.rx_frame_errors++;
+			if (rx_status & (RxRunt|RxTooLong)) tp->stats.rx_length_errors++;
+			if (rx_status & RxCRCErr) tp->stats.rx_crc_errors++;
+			/* Reset the receiver, based on RealTek recommendation. (Bug?) */
+			tp->cur_rx = 0;
+			outb(CmdTxEnb, ioaddr + ChipCmd);
+			outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+			outl((RX_FIFO_THRESH << 13) | (RX_BUF_LEN_IDX << 11) |
+				 (RX_DMA_BURST<<8), ioaddr + RxConfig);
+		} else {
+			/* Malloc up new buffer, compatible with net-2e. */
+			/* Omit the four octet CRC from the length. */
+			struct sk_buff *skb;
+
+			skb = dev_alloc_skb(rx_size + 2);
+			if (skb == NULL) {
+				printk(KERN_WARNING"%s: Memory squeeze, deferring packet.\n",
+					   dev->name);
+				/* We should check that some rx space is free.
+				   If not, free one and mark stats->rx_dropped++. */
+				tp->stats.rx_dropped++;
+				break;
+			}
+			skb->dev = dev;
+			skb_reserve(skb, 2);	/* 16 byte align the IP fields. */
+			if (ring_offset+rx_size+4 > RX_BUF_LEN) {
+				int semi_count = RX_BUF_LEN - ring_offset - 4;
+				memcpy(skb_put(skb, semi_count), &rx_ring[ring_offset + 4],
+					   semi_count);
+				memcpy(skb_put(skb, rx_size-semi_count), rx_ring,
+					   rx_size-semi_count);
+				if (rtl8129_debug > 4) {
+					int i;
+					printk(KERN_DEBUG"%s:  Frame wrap @%d",
+						   dev->name, semi_count);
+					for (i = 0; i < 16; i++)
+						printk(" %2.2x", rx_ring[i]);
+					printk(".\n");
+					memset(rx_ring, 0xcc, 16);
+				}
+			} else
+				memcpy(skb_put(skb, rx_size), &rx_ring[ring_offset + 4],
+					   rx_size);
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+#if LINUX_VERSION_CODE > 0x20119
+			tp->stats.rx_bytes += rx_size;
+#endif
+			tp->stats.rx_packets++;
+		}
+
+		cur_rx += rx_size + 4;
+		cur_rx = (cur_rx + 3) & ~3;
+		outw(cur_rx - 16, ioaddr + RxBufPtr);
+	}
+	if (rtl8129_debug > 4)
+		printk(KERN_DEBUG"%s: Done rtl8129_rx(), current %4.4x BufAddr %4.4x,"
+			   " free to %4.4x, Cmd %2.2x.\n",
+			   dev->name, cur_rx, inw(ioaddr + RxBufAddr),
+			   inw(ioaddr + RxBufPtr), inb(ioaddr + ChipCmd));
+	tp->cur_rx = cur_rx;
+	return 0;
+}
+
+static int
+rtl8129_close(struct device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	int i;
+
+	dev->start = 0;
+	dev->tbusy = 1;
+
+	if (rtl8129_debug > 1)
+		printk(KERN_DEBUG"%s: Shutting down ethercard, status was 0x%4.4x.\n",
+			   dev->name, inw(ioaddr + IntrStatus));
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	outw(0x0000, ioaddr + IntrMask);
+
+	/* Stop the chip's Tx and Rx DMA processes. */
+	outb(0x00, ioaddr + ChipCmd);
+
+	/* Update the error counts. */
+	tp->stats.rx_missed_errors += inl(ioaddr + RxMissed);
+	outl(0, ioaddr + RxMissed);
+
+	del_timer(&tp->timer);
+
+	free_irq(dev->irq, dev);
+
+	for (i = 0; i < NUM_TX_DESC; i++) {
+		if (tp->tx_skbuff[i])
+			dev_kfree_skb(tp->tx_skbuff[i], FREE_WRITE);
+		tp->tx_skbuff[i] = 0;
+	}
+	kfree(tp->rx_ring);
+	kfree(tp->tx_bufs);
+
+	/* Green! Put the chip in low-power mode. */
+	outb(0xC0, ioaddr + Cfg9346);
+	outb(0x03, ioaddr + Config1);
+	outb('H', ioaddr + HltClk);		/* 'R' would leave the clock running. */
+
+	MOD_DEC_USE_COUNT;
+
+	return 0;
+}
+
+static struct enet_statistics *
+rtl8129_get_stats(struct device *dev)
+{
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+
+	if (dev->start) {
+		tp->stats.rx_missed_errors += inl(ioaddr + RxMissed);
+		outl(0, ioaddr + RxMissed);
+	}
+
+	return &tp->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+   Note that we only use exclusion around actually queueing the
+   new frame, not around filling tp->setup_frame.  This is non-deterministic
+   when re-entered but still correct. */
+
+/* The little-endian AUTODIN II ethernet CRC calculation.
+   N.B. Do not use for bulk data, use a table-based routine instead.
+   This is common code and should be moved to net/core/crc.c */
+static unsigned const ethernet_polynomial_le = 0xedb88320U;
+static inline unsigned ether_crc_le(int length, unsigned char *data)
+{
+	unsigned int crc = 0xffffffff;	/* Initial value. */
+	while(--length >= 0) {
+		unsigned char current_octet = *data++;
+		int bit;
+		for (bit = 8; --bit >= 0; current_octet >>= 1) {
+			if ((crc ^ current_octet) & 1) {
+				crc >>= 1;
+				crc ^= ethernet_polynomial_le;
+			} else
+				crc >>= 1;
+		}
+	}
+	return crc;
+}
+
+static void set_rx_mode(struct device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
+	unsigned char mc_filter[8];		 /* Multicast hash filter */
+	int i;
+
+	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
+		/* Unconditionally log net taps. */
+		printk(KERN_NOTICE"%s: Promiscuous mode enabled.\n", dev->name);
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		outb(0x0F, ioaddr + RxConfig);
+	} else if ((dev->mc_count > 1000)  ||  (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		outb(0x0E, ioaddr + RxConfig);
+	} else if (dev->mc_count == 0) {
+		outb(0x0A, ioaddr + RxConfig);
+		return;
+	} else {
+		struct dev_mc_list *mclist;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+			 i++, mclist = mclist->next)
+			set_bit(ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f,
+					mc_filter);
+	}
+	/* ToDo: perhaps we need to stop the Tx and Rx process here? */
+	if (memcmp(mc_filter, tp->mc_filter, sizeof(mc_filter))) {
+		for (i = 0; i < 2; i++)
+			outl(((u32 *)mc_filter)[i], ioaddr + MAR0 + i*4);
+		memcpy(tp->mc_filter, mc_filter, sizeof(mc_filter));
+	}
+	if (rtl8129_debug > 3)
+		printk(KERN_DEBUG"%s:   set_rx_mode(%4.4x) done -- Rx config %8.8x.\n",
+			   dev->name, dev->flags, inl(ioaddr + RxConfig));
+	return;
+}
+
+#ifdef MODULE
+
+/* An additional parameter that may be passed in... */
+static int debug = -1;
+
+int
+init_module(void)
+{
+	int cards_found;
+
+	if (debug >= 0)
+		rtl8129_debug = debug;
+
+	root_rtl8129_dev = NULL;
+	cards_found = rtl8139_probe(0);
+
+	return cards_found ? 0 : -ENODEV;
+}
+
+void
+cleanup_module(void)
+{
+	struct device *next_dev;
+
+	/* No need to check MOD_IN_USE, as sys_delete_module() checks. */
+	while (root_rtl8129_dev) {
+		next_dev = ((struct rtl8129_private *)root_rtl8129_dev->priv)->next_module;
+		unregister_netdev(root_rtl8129_dev);
+		release_region(root_rtl8129_dev->base_addr, RTL8129_TOTAL_SIZE);
+		kfree(root_rtl8129_dev);
+		root_rtl8129_dev = next_dev;
+	}
+}
+
+#endif  /* MODULE */
+
+/*
+ * Local variables:
+ *  compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c rtl8139.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ *  SMP-compile-command: "gcc -D__SMP__ -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c rtl8139.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */