1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 1293 insertions, 0 deletions

diff --git a/linux/src/drivers/net/lance.c b/linux/src/drivers/net/lance.c
new file mode 100644
index 0000000..f64f0fe
--- /dev/null
+++ b/linux/src/drivers/net/lance.c
@@ -0,0 +1,1293 @@
+/* lance.c: An AMD LANCE/PCnet ethernet driver for Linux. */
+/*
+	Written/copyright 1993-1998 by Donald Becker.
+
+	Copyright 1993 United States Government as represented by the
+	Director, National Security Agency.
+	This software may be used and distributed according to the terms
+	of the GNU Public License, incorporated herein by reference.
+
+	This driver is for the Allied Telesis AT1500 and HP J2405A, and should work
+	with most other LANCE-based bus-master (NE2100/NE2500) ethercards.
+
+	The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
+	Center of Excellence in Space Data and Information Sciences
+	   Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
+
+	Fixing alignment problem with 1.3.* kernel and some minor changes
+	by Andrey V. Savochkin, 1996.
+
+	Problems or questions may be send to Donald Becker (see above) or to
+	Andrey Savochkin -- saw@shade.msu.ru or
+		Laboratory of Computation Methods, 
+		Department of Mathematics and Mechanics,
+		Moscow State University,
+		Leninskye Gory, Moscow 119899
+
+	But I should to inform you that I'm not an expert in the LANCE card
+	and it may occurs that you will receive no answer on your mail
+	to Donald Becker. I didn't receive any answer on all my letters
+	to him. Who knows why... But may be you are more lucky?  ;->
+                                                          SAW
+
+	Thomas Bogendoerfer (tsbogend@bigbug.franken.de):
+	- added support for Linux/Alpha, but removed most of it, because
+        it worked only for the PCI chip. 
+      - added hook for the 32bit lance driver
+      - added PCnetPCI II (79C970A) to chip table
+	Paul Gortmaker (gpg109@rsphy1.anu.edu.au):
+	- hopefully fix above so Linux/Alpha can use ISA cards too.
+    8/20/96 Fixed 7990 autoIRQ failure and reversed unneeded alignment -djb
+    v1.12 10/27/97 Module support -djb
+    v1.14  2/3/98 Module support modified, made PCI support optional -djb
+*/
+
+static const char *version = "lance.c:v1.14 2/3/1998 dplatt@3do.com, becker@cesdis.gsfc.nasa.gov\n";
+
+#ifdef MODULE
+#ifdef MODVERSIONS
+#include <linux/modversions.h>
+#endif
+#include <linux/module.h>
+#include <linux/version.h>
+#else
+#define MOD_INC_USE_COUNT
+#define MOD_DEC_USE_COUNT
+#endif
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/malloc.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/bios32.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+static unsigned int lance_portlist[] = { 0x300, 0x320, 0x340, 0x360, 0};
+int lance_probe(struct device *dev);
+int lance_probe1(struct device *dev, int ioaddr, int irq, int options);
+
+#ifdef HAVE_DEVLIST
+struct netdev_entry lance_drv =
+{"lance", lance_probe1, LANCE_TOTAL_SIZE, lance_portlist};
+#endif
+
+#ifdef LANCE_DEBUG
+int lance_debug = LANCE_DEBUG;
+#else
+int lance_debug = 1;
+#endif
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the AMD 79C960, the "PCnet-ISA
+single-chip ethernet controller for ISA".  This chip is used in a wide
+variety of boards from vendors such as Allied Telesis, HP, Kingston,
+and Boca.  This driver is also intended to work with older AMD 7990
+designs, such as the NE1500 and NE2100, and newer 79C961.  For convenience,
+I use the name LANCE to refer to all of the AMD chips, even though it properly
+refers only to the original 7990.
+
+II. Board-specific settings
+
+The driver is designed to work the boards that use the faster
+bus-master mode, rather than in shared memory mode.	 (Only older designs
+have on-board buffer memory needed to support the slower shared memory mode.)
+
+Most ISA boards have jumpered settings for the I/O base, IRQ line, and DMA
+channel.  This driver probes the likely base addresses:
+{0x300, 0x320, 0x340, 0x360}.
+After the board is found it generates a DMA-timeout interrupt and uses
+autoIRQ to find the IRQ line.  The DMA channel can be set with the low bits
+of the otherwise-unused dev->mem_start value (aka PARAM1).  If unset it is
+probed for by enabling each free DMA channel in turn and checking if
+initialization succeeds.
+
+The HP-J2405A board is an exception: with this board it is easy to read the
+EEPROM-set values for the base, IRQ, and DMA.  (Of course you must already
+_know_ the base address -- that field is for writing the EEPROM.)
+
+III. Driver operation
+
+IIIa. Ring buffers
+The LANCE uses ring buffers of Tx and Rx descriptors.  Each entry describes
+the base and length of the data buffer, along with status bits.	 The length
+of these buffers is set by LANCE_LOG_{RX,TX}_BUFFERS, which is log_2() of
+the buffer length (rather than being directly the buffer length) for
+implementation ease.  The current values are 2 (Tx) and 4 (Rx), which leads to
+ring sizes of 4 (Tx) and 16 (Rx).  Increasing the number of ring entries
+needlessly uses extra space and reduces the chance that an upper layer will
+be able to reorder queued Tx packets based on priority.	 Decreasing the number
+of entries makes it more difficult to achieve back-to-back packet transmission
+and increases the chance that Rx ring will overflow.  (Consider the worst case
+of receiving back-to-back minimum-sized packets.)
+
+The LANCE has the capability to "chain" both Rx and Tx buffers, but this driver
+statically allocates full-sized (slightly oversized -- PKT_BUF_SZ) buffers to
+avoid the administrative overhead. For the Rx side this avoids dynamically
+allocating full-sized buffers "just in case", at the expense of a
+memory-to-memory data copy for each packet received.  For most systems this
+is a good tradeoff: the Rx buffer will always be in low memory, the copy
+is inexpensive, and it primes the cache for later packet processing.  For Tx
+the buffers are only used when needed as low-memory bounce buffers.
+
+IIIB. 16M memory limitations.
+For the ISA bus master mode all structures used directly by the LANCE,
+the initialization block, Rx and Tx rings, and data buffers, must be
+accessible from the ISA bus, i.e. in the lower 16M of real memory.
+This is a problem for current Linux kernels on >16M machines. The network
+devices are initialized after memory initialization, and the kernel doles out
+memory from the top of memory downward.	 The current solution is to have a
+special network initialization routine that's called before memory
+initialization; this will eventually be generalized for all network devices.
+As mentioned before, low-memory "bounce-buffers" are used when needed.
+
+IIIC. Synchronization
+The driver runs as two independent, single-threaded flows of control.  One
+is the send-packet routine, which enforces single-threaded use by the
+dev->tbusy flag.  The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+The send packet thread has partial control over the Tx ring and 'dev->tbusy'
+flag.  It sets the tbusy flag whenever it's queuing a Tx packet. If the next
+queue slot is empty, it clears the tbusy flag when finished otherwise it sets
+the 'lp->tx_full' flag.
+
+The interrupt handler has exclusive control over the Rx ring and records stats
+from the Tx ring.  (The Tx-done interrupt can't be selectively turned off, so
+we can't avoid the interrupt overhead by having the Tx routine reap the Tx
+stats.)	 After reaping the stats, it marks the queue entry as empty by setting
+the 'base' to zero.	 Iff the 'lp->tx_full' flag is set, it clears both the
+tx_full and tbusy flags.
+
+*/
+
+/* Set the number of Tx and Rx buffers, using Log_2(# buffers).
+   Reasonable default values are 16 Tx buffers, and 16 Rx buffers.
+   That translates to 4 and 4 (16 == 2^^4).
+   This is a compile-time option for efficiency.
+   */
+#ifndef LANCE_LOG_TX_BUFFERS
+#define LANCE_LOG_TX_BUFFERS 4
+#define LANCE_LOG_RX_BUFFERS 4
+#endif
+
+#define TX_RING_SIZE			(1 << (LANCE_LOG_TX_BUFFERS))
+#define TX_RING_MOD_MASK		(TX_RING_SIZE - 1)
+#define TX_RING_LEN_BITS		((LANCE_LOG_TX_BUFFERS) << 29)
+
+#define RX_RING_SIZE			(1 << (LANCE_LOG_RX_BUFFERS))
+#define RX_RING_MOD_MASK		(RX_RING_SIZE - 1)
+#define RX_RING_LEN_BITS		((LANCE_LOG_RX_BUFFERS) << 29)
+
+#define PKT_BUF_SZ		1544
+
+/* Offsets from base I/O address. */
+#define LANCE_DATA 0x10
+#define LANCE_ADDR 0x12
+#define LANCE_RESET 0x14
+#define LANCE_BUS_IF 0x16
+#define LANCE_TOTAL_SIZE 0x18
+
+/* The LANCE Rx and Tx ring descriptors. */
+struct lance_rx_head {
+	s32 base;
+	s16 buf_length;			/* This length is 2s complement (negative)! */
+	s16 msg_length;			/* This length is "normal". */
+};
+
+struct lance_tx_head {
+	s32 base;
+	s16 length;				/* Length is 2s complement (negative)! */
+	s16 misc;
+};
+
+/* The LANCE initialization block, described in databook. */
+struct lance_init_block {
+	u16 mode;		/* Pre-set mode (reg. 15) */
+	u8  phys_addr[6]; /* Physical ethernet address */
+	u32 filter[2];			/* Multicast filter (unused). */
+	/* Receive and transmit ring base, along with extra bits. */
+	u32  rx_ring;			/* Tx and Rx ring base pointers */
+	u32  tx_ring;
+};
+
+struct lance_private {
+	/* The Tx and Rx ring entries must be aligned on 8-byte boundaries. */
+	struct lance_rx_head rx_ring[RX_RING_SIZE];
+	struct lance_tx_head tx_ring[TX_RING_SIZE];
+	struct lance_init_block	init_block;
+	const char *name;
+	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
+	struct sk_buff* tx_skbuff[TX_RING_SIZE];
+	/* The addresses of receive-in-place skbuffs. */
+	struct sk_buff* rx_skbuff[RX_RING_SIZE];
+	unsigned long rx_buffs;		/* Address of Rx and Tx buffers. */
+	/* Tx low-memory "bounce buffer" address. */
+	char (*tx_bounce_buffs)[PKT_BUF_SZ];
+	int cur_rx, cur_tx;			/* The next free ring entry */
+	int dirty_rx, dirty_tx;		/* The ring entries to be free()ed. */
+	int dma;
+	struct enet_statistics stats;
+	unsigned char chip_version;	/* See lance_chip_type. */
+	char tx_full;
+	unsigned long lock;
+};
+
+#define LANCE_MUST_PAD          0x00000001
+#define LANCE_ENABLE_AUTOSELECT 0x00000002
+#define LANCE_MUST_REINIT_RING  0x00000004
+#define LANCE_MUST_UNRESET      0x00000008
+#define LANCE_HAS_MISSED_FRAME  0x00000010
+
+/* A mapping from the chip ID number to the part number and features.
+   These are from the datasheets -- in real life the '970 version
+   reportedly has the same ID as the '965. */
+static struct lance_chip_type {
+	int id_number;
+	const char *name;
+	int flags;
+} chip_table[] = {
+	{0x0000, "LANCE 7990",				/* Ancient lance chip.  */
+		LANCE_MUST_PAD + LANCE_MUST_UNRESET},
+	{0x0003, "PCnet/ISA 79C960",		/* 79C960 PCnet/ISA.  */
+		LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING +
+			LANCE_HAS_MISSED_FRAME},
+	{0x2260, "PCnet/ISA+ 79C961",		/* 79C961 PCnet/ISA+, Plug-n-Play.  */
+		LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING +
+			LANCE_HAS_MISSED_FRAME},
+	{0x2420, "PCnet/PCI 79C970",		/* 79C970 or 79C974 PCnet-SCSI, PCI. */
+		LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING +
+			LANCE_HAS_MISSED_FRAME},
+	/* Bug: the PCnet/PCI actually uses the PCnet/VLB ID number, so just call
+		it the PCnet32. */
+	{0x2430, "PCnet32",					/* 79C965 PCnet for VL bus. */
+		LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING +
+			LANCE_HAS_MISSED_FRAME},
+        {0x2621, "PCnet/PCI-II 79C970A",        /* 79C970A PCInetPCI II. */
+                LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING +
+                        LANCE_HAS_MISSED_FRAME},
+	{0x0, 	 "PCnet (unknown)",
+		LANCE_ENABLE_AUTOSELECT + LANCE_MUST_REINIT_RING +
+			LANCE_HAS_MISSED_FRAME},
+};
+
+enum {OLD_LANCE = 0, PCNET_ISA=1, PCNET_ISAP=2, PCNET_PCI=3, PCNET_VLB=4, PCNET_PCI_II=5, LANCE_UNKNOWN=6};
+
+/* Non-zero only if the current card is a PCI with BIOS-set IRQ. */
+static unsigned char pci_irq_line = 0;
+
+/* Non-zero if lance_probe1() needs to allocate low-memory bounce buffers.
+   Assume yes until we know the memory size. */
+static unsigned char lance_need_isa_bounce_buffers = 1;
+
+static int lance_open(struct device *dev);
+static int lance_open_fail(struct device *dev);
+static void lance_init_ring(struct device *dev, int mode);
+static int lance_start_xmit(struct sk_buff *skb, struct device *dev);
+static int lance_rx(struct device *dev);
+static void lance_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int lance_close(struct device *dev);
+static struct enet_statistics *lance_get_stats(struct device *dev);
+static void set_multicast_list(struct device *dev);
+
+
+
+#ifdef MODULE
+#define MAX_CARDS		8	/* Max number of interfaces (cards) per module */
+#define IF_NAMELEN		8	/* # of chars for storing dev->name */
+
+static int io[MAX_CARDS] = { 0, };
+static int dma[MAX_CARDS] = { 0, };
+static int irq[MAX_CARDS]  = { 0, };
+
+static char ifnames[MAX_CARDS][IF_NAMELEN] = { {0, }, };
+static struct device dev_lance[MAX_CARDS] =
+{{
+    0, /* device name is inserted by linux/drivers/net/net_init.c */
+	0, 0, 0, 0,
+	0, 0,
+	0, 0, 0, NULL, NULL}};
+
+int init_module(void)
+{
+	int this_dev, found = 0;
+
+	for (this_dev = 0; this_dev < MAX_CARDS; this_dev++) {
+		struct device *dev = &dev_lance[this_dev];
+		dev->name = ifnames[this_dev];
+		dev->irq = irq[this_dev];
+		dev->base_addr = io[this_dev];
+		dev->dma = dma[this_dev];
+		dev->init = lance_probe;
+		if (io[this_dev] == 0)  {
+			if (this_dev != 0) break; /* only complain once */
+			printk(KERN_NOTICE "lance.c: Module autoprobing not allowed. Append \"io=0xNNN\" value(s).\n");
+			return -EPERM;
+		}
+		if (register_netdev(dev) != 0) {
+			printk(KERN_WARNING "lance.c: No PCnet/LANCE card found (i/o = 0x%x).\n", io[this_dev]);
+			if (found != 0) return 0;	/* Got at least one. */
+			return -ENXIO;
+		}
+		found++;
+	}
+
+	return 0;
+}
+
+void
+cleanup_module(void)
+{
+	int this_dev;
+
+	for (this_dev = 0; this_dev < MAX_CARDS; this_dev++) {
+		struct device *dev = &dev_lance[this_dev];
+		if (dev->priv != NULL) {
+			kfree(dev->priv);
+			dev->priv = NULL;
+			free_dma(dev->dma);
+			release_region(dev->base_addr, LANCE_TOTAL_SIZE);
+			unregister_netdev(dev);
+		}
+	}
+}
+#endif /* MODULE */
+
+/* Starting in v2.1.*, the LANCE/PCnet probe is now similar to the other
+   board probes now that kmalloc() can allocate ISA DMA-able regions.
+   This also allows the LANCE driver to be used as a module.
+   */
+int lance_probe(struct device *dev)
+{
+	int *port, result;
+
+	if (high_memory <= 16*1024*1024)
+		lance_need_isa_bounce_buffers = 0;
+
+#if defined(CONFIG_PCI)
+    if (pcibios_present()) {
+	    int pci_index;
+		if (lance_debug > 1)
+			printk("lance.c: PCI bios is present, checking for devices...\n");
+		for (pci_index = 0; pci_index < 8; pci_index++) {
+			unsigned char pci_bus, pci_device_fn;
+			unsigned int pci_ioaddr;
+			unsigned short pci_command;
+
+			if (pcibios_find_device (PCI_VENDOR_ID_AMD,
+									 PCI_DEVICE_ID_AMD_LANCE, pci_index,
+									 &pci_bus, &pci_device_fn) != 0)
+				break;
+			pcibios_read_config_byte(pci_bus, pci_device_fn,
+									 PCI_INTERRUPT_LINE, &pci_irq_line);
+			pcibios_read_config_dword(pci_bus, pci_device_fn,
+									  PCI_BASE_ADDRESS_0, &pci_ioaddr);
+			/* Remove I/O space marker in bit 0. */
+			pci_ioaddr &= ~3;
+			/* PCI Spec 2.1 states that it is either the driver or PCI card's
+	 		 * responsibility to set the PCI Master Enable Bit if needed.
+			 *	(From Mark Stockton <marks@schooner.sys.hou.compaq.com>)
+			 */
+			pcibios_read_config_word(pci_bus, pci_device_fn,
+									 PCI_COMMAND, &pci_command);
+			if ( ! (pci_command & PCI_COMMAND_MASTER)) {
+				printk("PCI Master Bit has not been set. Setting...\n");
+				pci_command |= PCI_COMMAND_MASTER;
+				pcibios_write_config_word(pci_bus, pci_device_fn,
+										  PCI_COMMAND, pci_command);
+			}
+			printk("Found PCnet/PCI at %#x, irq %d.\n",
+				   pci_ioaddr, pci_irq_line);
+			result = lance_probe1(dev, pci_ioaddr, pci_irq_line, 0);
+			pci_irq_line = 0;
+			if (!result) return 0;
+		}
+	}
+#endif  /* defined(CONFIG_PCI) */
+
+	for (port = lance_portlist; *port; port++) {
+		int ioaddr = *port;
+
+		if ( check_region(ioaddr, LANCE_TOTAL_SIZE) == 0) {
+			/* Detect "normal" 0x57 0x57 and the NI6510EB 0x52 0x44
+			   signatures w/ minimal I/O reads */
+			char offset15, offset14 = inb(ioaddr + 14);
+			
+			if ((offset14 == 0x52 || offset14 == 0x57) &&
+				((offset15 = inb(ioaddr + 15)) == 0x57 || offset15 == 0x44)) {
+				result = lance_probe1(dev, ioaddr, 0, 0);
+				if ( !result ) return 0;
+			}
+		}
+	}
+	return -ENODEV;
+}
+
+int lance_probe1(struct device *dev, int ioaddr, int irq, int options)
+{
+	struct lance_private *lp;
+	short dma_channels;					/* Mark spuriously-busy DMA channels */
+	int i, reset_val, lance_version;
+	const char *chipname;
+	/* Flags for specific chips or boards. */
+	unsigned char hpJ2405A = 0;			/* HP ISA adaptor */
+	int hp_builtin = 0;					/* HP on-board ethernet. */
+	static int did_version = 0;			/* Already printed version info. */
+
+	/* First we look for special cases.
+	   Check for HP's on-board ethernet by looking for 'HP' in the BIOS.
+	   There are two HP versions, check the BIOS for the configuration port.
+	   This method provided by L. Julliard, Laurent_Julliard@grenoble.hp.com.
+	   */
+	if (readw(0x000f0102) == 0x5048)  {
+		static const short ioaddr_table[] = { 0x300, 0x320, 0x340, 0x360};
+		int hp_port = (readl(0x000f00f1) & 1)  ? 0x499 : 0x99;
+		/* We can have boards other than the built-in!  Verify this is on-board. */
+		if ((inb(hp_port) & 0xc0) == 0x80
+			&& ioaddr_table[inb(hp_port) & 3] == ioaddr)
+			hp_builtin = hp_port;
+	}
+	/* We also recognize the HP Vectra on-board here, but check below. */
+	hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00
+				&& inb(ioaddr+2) == 0x09);
+
+	/* Reset the LANCE.	 */
+	reset_val = inw(ioaddr+LANCE_RESET); /* Reset the LANCE */
+
+	/* The Un-Reset needed is only needed for the real NE2100, and will
+	   confuse the HP board. */
+	if (!hpJ2405A)
+		outw(reset_val, ioaddr+LANCE_RESET);
+
+	outw(0x0000, ioaddr+LANCE_ADDR); /* Switch to window 0 */
+	if (inw(ioaddr+LANCE_DATA) != 0x0004)
+		return -ENODEV;
+
+	/* Get the version of the chip. */
+	outw(88, ioaddr+LANCE_ADDR);
+	if (inw(ioaddr+LANCE_ADDR) != 88) {
+		lance_version = 0;
+	} else {							/* Good, it's a newer chip. */
+		int chip_version = inw(ioaddr+LANCE_DATA);
+		outw(89, ioaddr+LANCE_ADDR);
+		chip_version |= inw(ioaddr+LANCE_DATA) << 16;
+		if (lance_debug > 2)
+			printk("  LANCE chip version is %#x.\n", chip_version);
+		if ((chip_version & 0xfff) != 0x003)
+			return -ENODEV;
+		chip_version = (chip_version >> 12) & 0xffff;
+		for (lance_version = 1; chip_table[lance_version].id_number; lance_version++) {
+			if (chip_table[lance_version].id_number == chip_version)
+				break;
+		}
+	}
+
+	/* We can't use init_etherdev() to allocate dev->priv because it must
+	   a ISA DMA-able region. */
+	dev = init_etherdev(dev, 0);
+	dev->open = lance_open_fail;
+	chipname = chip_table[lance_version].name;
+	printk("%s: %s at %#3x,", dev->name, chipname, ioaddr);
+
+	/* There is a 16 byte station address PROM at the base address.
+	   The first six bytes are the station address. */
+	for (i = 0; i < 6; i++)
+		printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
+
+	dev->base_addr = ioaddr;
+	request_region(ioaddr, LANCE_TOTAL_SIZE, chip_table[lance_version].name);
+
+	/* Make certain the data structures used by the LANCE are aligned and DMAble. */
+		
+	lp = (struct lance_private *)(((unsigned long)kmalloc(sizeof(*lp)+7,
+										   GFP_DMA | GFP_KERNEL)+7) & ~7);
+	if (lance_debug > 6) printk(" (#0x%05lx)", (unsigned long)lp);
+	memset(lp, 0, sizeof(*lp));
+	dev->priv = lp;
+	lp->name = chipname;
+	lp->rx_buffs = (unsigned long)kmalloc(PKT_BUF_SZ*RX_RING_SIZE,
+										  GFP_DMA | GFP_KERNEL);
+	if (lance_need_isa_bounce_buffers)
+		lp->tx_bounce_buffs = kmalloc(PKT_BUF_SZ*TX_RING_SIZE,
+									  GFP_DMA | GFP_KERNEL);
+	else
+		lp->tx_bounce_buffs = NULL;
+
+	lp->chip_version = lance_version;
+
+	lp->init_block.mode = 0x0003;		/* Disable Rx and Tx. */
+	for (i = 0; i < 6; i++)
+		lp->init_block.phys_addr[i] = dev->dev_addr[i];
+	lp->init_block.filter[0] = 0x00000000;
+	lp->init_block.filter[1] = 0x00000000;
+	lp->init_block.rx_ring = ((u32)virt_to_bus(lp->rx_ring) & 0xffffff) | RX_RING_LEN_BITS;
+	lp->init_block.tx_ring = ((u32)virt_to_bus(lp->tx_ring) & 0xffffff) | TX_RING_LEN_BITS;
+
+	outw(0x0001, ioaddr+LANCE_ADDR);
+	inw(ioaddr+LANCE_ADDR);
+	outw((short) (u32) virt_to_bus(&lp->init_block), ioaddr+LANCE_DATA);
+	outw(0x0002, ioaddr+LANCE_ADDR);
+	inw(ioaddr+LANCE_ADDR);
+	outw(((u32)virt_to_bus(&lp->init_block)) >> 16, ioaddr+LANCE_DATA);
+	outw(0x0000, ioaddr+LANCE_ADDR);
+	inw(ioaddr+LANCE_ADDR);
+
+	if (irq) {					/* Set iff PCI card. */
+		dev->dma = 4;			/* Native bus-master, no DMA channel needed. */
+		dev->irq = irq;
+	} else if (hp_builtin) {
+		static const char dma_tbl[4] = {3, 5, 6, 0};
+		static const char irq_tbl[4] = {3, 4, 5, 9};
+		unsigned char port_val = inb(hp_builtin);
+		dev->dma = dma_tbl[(port_val >> 4) & 3];
+		dev->irq = irq_tbl[(port_val >> 2) & 3];
+		printk(" HP Vectra IRQ %d DMA %d.\n", dev->irq, dev->dma);
+	} else if (hpJ2405A) {
+		static const char dma_tbl[4] = {3, 5, 6, 7};
+		static const char irq_tbl[8] = {3, 4, 5, 9, 10, 11, 12, 15};
+		short reset_val = inw(ioaddr+LANCE_RESET);
+		dev->dma = dma_tbl[(reset_val >> 2) & 3];
+		dev->irq = irq_tbl[(reset_val >> 4) & 7];
+		printk(" HP J2405A IRQ %d DMA %d.\n", dev->irq, dev->dma);
+	} else if (lance_version == PCNET_ISAP) {		/* The plug-n-play version. */
+		short bus_info;
+		outw(8, ioaddr+LANCE_ADDR);
+		bus_info = inw(ioaddr+LANCE_BUS_IF);
+		dev->dma = bus_info & 0x07;
+		dev->irq = (bus_info >> 4) & 0x0F;
+	} else {
+		/* The DMA channel may be passed in PARAM1. */
+		if (dev->mem_start & 0x07)
+			dev->dma = dev->mem_start & 0x07;
+	}
+
+	if (dev->dma == 0) {
+		/* Read the DMA channel status register, so that we can avoid
+		   stuck DMA channels in the DMA detection below. */
+		dma_channels = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
+			(inb(DMA2_STAT_REG) & 0xf0);
+	}
+	if (dev->irq >= 2)
+		printk(" assigned IRQ %d", dev->irq);
+	else if (lance_version != 0)  {	/* 7990 boards need DMA detection first. */
+		/* To auto-IRQ we enable the initialization-done and DMA error
+		   interrupts. For ISA boards we get a DMA error, but VLB and PCI
+		   boards will work. */
+		autoirq_setup(0);
+
+		/* Trigger an initialization just for the interrupt. */
+		outw(0x0041, ioaddr+LANCE_DATA);
+
+		dev->irq = autoirq_report(2);
+		if (dev->irq)
+			printk(", probed IRQ %d", dev->irq);
+		else {
+			printk(", failed to detect IRQ line.\n");
+			return -ENODEV;
+		}
+
+		/* Check for the initialization done bit, 0x0100, which means
+		   that we don't need a DMA channel. */
+		if (inw(ioaddr+LANCE_DATA) & 0x0100)
+			dev->dma = 4;
+	}
+
+	if (dev->dma == 4) {
+		printk(", no DMA needed.\n");
+	} else if (dev->dma) {
+		if (request_dma(dev->dma, chipname)) {
+			printk("DMA %d allocation failed.\n", dev->dma);
+			return -ENODEV;
+		} else
+			printk(", assigned DMA %d.\n", dev->dma);
+	} else {			/* OK, we have to auto-DMA. */
+		for (i = 0; i < 4; i++) {
+			static const char dmas[] = { 5, 6, 7, 3 };
+			int dma = dmas[i];
+			int boguscnt;
+
+			/* Don't enable a permanently busy DMA channel, or the machine
+			   will hang. */
+			if (test_bit(dma, &dma_channels))
+				continue;
+			outw(0x7f04, ioaddr+LANCE_DATA); /* Clear the memory error bits. */
+			if (request_dma(dma, chipname))
+				continue;
+			set_dma_mode(dma, DMA_MODE_CASCADE);
+			enable_dma(dma);
+
+			/* Trigger an initialization. */
+			outw(0x0001, ioaddr+LANCE_DATA);
+			for (boguscnt = 100; boguscnt > 0; --boguscnt)
+				if (inw(ioaddr+LANCE_DATA) & 0x0900)
+					break;
+			if (inw(ioaddr+LANCE_DATA) & 0x0100) {
+				dev->dma = dma;
+				printk(", DMA %d.\n", dev->dma);
+				break;
+			} else {
+				disable_dma(dma);
+				free_dma(dma);
+			}
+		}
+		if (i == 4) {			/* Failure: bail. */
+			printk("DMA detection failed.\n");
+			return -ENODEV;
+		}
+	}
+
+	if (lance_version == 0 && dev->irq == 0) {
+		/* We may auto-IRQ now that we have a DMA channel. */
+		/* Trigger an initialization just for the interrupt. */
+		autoirq_setup(0);
+		outw(0x0041, ioaddr+LANCE_DATA);
+
+		dev->irq = autoirq_report(4);
+		if (dev->irq == 0) {
+			printk("  Failed to detect the 7990 IRQ line.\n");
+			return -ENODEV;
+		}
+		printk("  Auto-IRQ detected IRQ%d.\n", dev->irq);
+	}
+
+	if (chip_table[lp->chip_version].flags & LANCE_ENABLE_AUTOSELECT) {
+		/* Turn on auto-select of media (10baseT or BNC) so that the user
+		   can watch the LEDs even if the board isn't opened. */
+		outw(0x0002, ioaddr+LANCE_ADDR);
+		/* Don't touch 10base2 power bit. */
+		outw(inw(ioaddr+LANCE_BUS_IF) | 0x0002, ioaddr+LANCE_BUS_IF);
+	}
+
+	if (lance_debug > 0  &&  did_version++ == 0)
+		printk(version);
+
+	/* The LANCE-specific entries in the device structure. */
+	dev->open = lance_open;
+	dev->hard_start_xmit = lance_start_xmit;
+	dev->stop = lance_close;
+	dev->get_stats = lance_get_stats;
+	dev->set_multicast_list = set_multicast_list;
+
+	return 0;
+}
+
+static int
+lance_open_fail(struct device *dev)
+{
+	return -ENODEV;
+}
+
+
+
+static int
+lance_open(struct device *dev)
+{
+	struct lance_private *lp = (struct lance_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int i;
+
+	if (dev->irq == 0 ||
+		request_irq(dev->irq, &lance_interrupt, 0, lp->name, dev)) {
+		return -EAGAIN;
+	}
+
+	MOD_INC_USE_COUNT;
+
+	/* We used to allocate DMA here, but that was silly.
+	   DMA lines can't be shared!  We now permanently allocate them. */
+
+	/* Reset the LANCE */
+	inw(ioaddr+LANCE_RESET);
+
+	/* The DMA controller is used as a no-operation slave, "cascade mode". */
+	if (dev->dma != 4) {
+		enable_dma(dev->dma);
+		set_dma_mode(dev->dma, DMA_MODE_CASCADE);
+	}
+
+	/* Un-Reset the LANCE, needed only for the NE2100. */
+	if (chip_table[lp->chip_version].flags & LANCE_MUST_UNRESET)
+		outw(0, ioaddr+LANCE_RESET);
+
+	if (chip_table[lp->chip_version].flags & LANCE_ENABLE_AUTOSELECT) {
+		/* This is 79C960-specific: Turn on auto-select of media (AUI, BNC). */
+		outw(0x0002, ioaddr+LANCE_ADDR);
+		/* Only touch autoselect bit. */
+		outw(inw(ioaddr+LANCE_BUS_IF) | 0x0002, ioaddr+LANCE_BUS_IF);
+ 	}
+
+	if (lance_debug > 1)
+		printk("%s: lance_open() irq %d dma %d tx/rx rings %#x/%#x init %#x.\n",
+			   dev->name, dev->irq, dev->dma,
+		           (u32) virt_to_bus(lp->tx_ring),
+		           (u32) virt_to_bus(lp->rx_ring),
+			   (u32) virt_to_bus(&lp->init_block));
+
+	lance_init_ring(dev, GFP_KERNEL);
+	/* Re-initialize the LANCE, and start it when done. */
+	outw(0x0001, ioaddr+LANCE_ADDR);
+	outw((short) (u32) virt_to_bus(&lp->init_block), ioaddr+LANCE_DATA);
+	outw(0x0002, ioaddr+LANCE_ADDR);
+	outw(((u32)virt_to_bus(&lp->init_block)) >> 16, ioaddr+LANCE_DATA);
+
+	outw(0x0004, ioaddr+LANCE_ADDR);
+	outw(0x0915, ioaddr+LANCE_DATA);
+
+	outw(0x0000, ioaddr+LANCE_ADDR);
+	outw(0x0001, ioaddr+LANCE_DATA);
+
+	dev->tbusy = 0;
+	dev->interrupt = 0;
+	dev->start = 1;
+	i = 0;
+	while (i++ < 100)
+		if (inw(ioaddr+LANCE_DATA) & 0x0100)
+			break;
+	/* 
+	 * We used to clear the InitDone bit, 0x0100, here but Mark Stockton
+	 * reports that doing so triggers a bug in the '974.
+	 */
+ 	outw(0x0042, ioaddr+LANCE_DATA);
+
+	if (lance_debug > 2)
+		printk("%s: LANCE open after %d ticks, init block %#x csr0 %4.4x.\n",
+			   dev->name, i, (u32) virt_to_bus(&lp->init_block), inw(ioaddr+LANCE_DATA));
+
+	return 0;					/* Always succeed */
+}
+
+/* The LANCE has been halted for one reason or another (busmaster memory
+   arbitration error, Tx FIFO underflow, driver stopped it to reconfigure,
+   etc.).  Modern LANCE variants always reload their ring-buffer
+   configuration when restarted, so we must reinitialize our ring
+   context before restarting.  As part of this reinitialization,
+   find all packets still on the Tx ring and pretend that they had been
+   sent (in effect, drop the packets on the floor) - the higher-level
+   protocols will time out and retransmit.  It'd be better to shuffle
+   these skbs to a temp list and then actually re-Tx them after
+   restarting the chip, but I'm too lazy to do so right now.  dplatt@3do.com
+*/
+
+static void 
+lance_purge_tx_ring(struct device *dev)
+{
+	struct lance_private *lp = (struct lance_private *)dev->priv;
+	int i;
+
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		if (lp->tx_skbuff[i]) {
+			dev_kfree_skb(lp->tx_skbuff[i],FREE_WRITE);
+			lp->tx_skbuff[i] = NULL;
+		}
+	}
+}
+
+
+/* Initialize the LANCE Rx and Tx rings. */
+static void
+lance_init_ring(struct device *dev, int gfp)
+{
+	struct lance_private *lp = (struct lance_private *)dev->priv;
+	int i;
+
+	lp->lock = 0, lp->tx_full = 0;
+	lp->cur_rx = lp->cur_tx = 0;
+	lp->dirty_rx = lp->dirty_tx = 0;
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		struct sk_buff *skb;
+		void *rx_buff;
+
+		skb = alloc_skb(PKT_BUF_SZ, GFP_DMA | gfp);
+		lp->rx_skbuff[i] = skb;
+		if (skb) {
+			skb->dev = dev;
+			rx_buff = skb->tail;
+		} else
+			rx_buff = kmalloc(PKT_BUF_SZ, GFP_DMA | gfp);
+		if (rx_buff == NULL)
+			lp->rx_ring[i].base = 0;
+		else
+			lp->rx_ring[i].base = (u32)virt_to_bus(rx_buff) | 0x80000000;
+		lp->rx_ring[i].buf_length = -PKT_BUF_SZ;
+	}
+	/* The Tx buffer address is filled in as needed, but we do need to clear
+	   the upper ownership bit. */
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		lp->tx_skbuff[i] = 0;
+		lp->tx_ring[i].base = 0;
+	}
+
+	lp->init_block.mode = 0x0000;
+	for (i = 0; i < 6; i++)
+		lp->init_block.phys_addr[i] = dev->dev_addr[i];
+	lp->init_block.filter[0] = 0x00000000;
+	lp->init_block.filter[1] = 0x00000000;
+	lp->init_block.rx_ring = ((u32)virt_to_bus(lp->rx_ring) & 0xffffff) | RX_RING_LEN_BITS;
+	lp->init_block.tx_ring = ((u32)virt_to_bus(lp->tx_ring) & 0xffffff) | TX_RING_LEN_BITS;
+}
+
+static void
+lance_restart(struct device *dev, unsigned int csr0_bits, int must_reinit)
+{
+	struct lance_private *lp = (struct lance_private *)dev->priv;
+
+	if (must_reinit ||
+		(chip_table[lp->chip_version].flags & LANCE_MUST_REINIT_RING)) {
+		lance_purge_tx_ring(dev);
+		lance_init_ring(dev, GFP_ATOMIC);
+	}
+	outw(0x0000,    dev->base_addr + LANCE_ADDR);
+	outw(csr0_bits, dev->base_addr + LANCE_DATA);
+}
+
+static int
+lance_start_xmit(struct sk_buff *skb, struct device *dev)
+{
+	struct lance_private *lp = (struct lance_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int entry;
+	unsigned long flags;
+
+	/* Transmitter timeout, serious problems. */
+	if (dev->tbusy) {
+		int tickssofar = jiffies - dev->trans_start;
+		if (tickssofar < 20)
+			return 1;
+		outw(0, ioaddr+LANCE_ADDR);
+		printk("%s: transmit timed out, status %4.4x, resetting.\n",
+			   dev->name, inw(ioaddr+LANCE_DATA));
+		outw(0x0004, ioaddr+LANCE_DATA);
+		lp->stats.tx_errors++;
+#ifndef final_version
+		{
+			int i;
+			printk(" Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.",
+				   lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "",
+				   lp->cur_rx);
+			for (i = 0 ; i < RX_RING_SIZE; i++)
+				printk("%s %08x %04x %04x", i & 0x3 ? "" : "\n ",
+					   lp->rx_ring[i].base, -lp->rx_ring[i].buf_length,
+					   lp->rx_ring[i].msg_length);
+			for (i = 0 ; i < TX_RING_SIZE; i++)
+				printk("%s %08x %04x %04x", i & 0x3 ? "" : "\n ",
+					   lp->tx_ring[i].base, -lp->tx_ring[i].length,
+					   lp->tx_ring[i].misc);
+			printk("\n");
+		}
+#endif
+		lance_restart(dev, 0x0043, 1);
+
+		dev->tbusy=0;
+		dev->trans_start = jiffies;
+
+		return 0;
+	}
+
+	if (lance_debug > 3) {
+		outw(0x0000, ioaddr+LANCE_ADDR);
+		printk("%s: lance_start_xmit() called, csr0 %4.4x.\n", dev->name,
+			   inw(ioaddr+LANCE_DATA));
+		outw(0x0000, ioaddr+LANCE_DATA);
+	}
+
+	/* Block a timer-based transmit from overlapping.  This could better be
+	   done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
+	if (set_bit(0, (void*)&dev->tbusy) != 0) {
+		printk("%s: Transmitter access conflict.\n", dev->name);
+		return 1;
+	}
+
+	if (set_bit(0, (void*)&lp->lock) != 0) {
+		if (lance_debug > 0)
+			printk("%s: tx queue lock!.\n", dev->name);
+		/* don't clear dev->tbusy flag. */
+		return 1;
+	}
+
+	/* Fill in a Tx ring entry */
+
+	/* Mask to ring buffer boundary. */
+	entry = lp->cur_tx & TX_RING_MOD_MASK;
+
+	/* Caution: the write order is important here, set the base address
+	   with the "ownership" bits last. */
+
+	/* The old LANCE chips doesn't automatically pad buffers to min. size. */
+	if (chip_table[lp->chip_version].flags & LANCE_MUST_PAD) {
+		lp->tx_ring[entry].length =
+			-(ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN);
+	} else
+		lp->tx_ring[entry].length = -skb->len;
+
+	lp->tx_ring[entry].misc = 0x0000;
+
+	/* If any part of this buffer is >16M we must copy it to a low-memory
+	   buffer. */
+	if ((u32)virt_to_bus(skb->data) + skb->len > 0x01000000) {
+		if (lance_debug > 5)
+			printk("%s: bouncing a high-memory packet (%#x).\n",
+				   dev->name, (u32)virt_to_bus(skb->data));
+		memcpy(&lp->tx_bounce_buffs[entry], skb->data, skb->len);
+		lp->tx_ring[entry].base =
+			((u32)virt_to_bus((lp->tx_bounce_buffs + entry)) & 0xffffff) | 0x83000000;
+		dev_kfree_skb (skb, FREE_WRITE);
+	} else {
+		lp->tx_skbuff[entry] = skb;
+		lp->tx_ring[entry].base = ((u32)virt_to_bus(skb->data) & 0xffffff) | 0x83000000;
+	}
+	lp->cur_tx++;
+
+	/* Trigger an immediate send poll. */
+	outw(0x0000, ioaddr+LANCE_ADDR);
+	outw(0x0048, ioaddr+LANCE_DATA);
+
+	dev->trans_start = jiffies;
+
+	save_flags(flags);
+	cli();
+	lp->lock = 0;
+	if (lp->tx_ring[(entry+1) & TX_RING_MOD_MASK].base == 0)
+		dev->tbusy=0;
+	else
+		lp->tx_full = 1;
+	restore_flags(flags);
+
+	return 0;
+}
+
+/* The LANCE interrupt handler. */
+static void
+lance_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+	struct device *dev = (struct device *)dev_id;
+	struct lance_private *lp;
+	int csr0, ioaddr, boguscnt=10;
+	int must_restart;
+
+	if (dev == NULL) {
+		printk ("lance_interrupt(): irq %d for unknown device.\n", irq);
+		return;
+	}
+
+	ioaddr = dev->base_addr;
+	lp = (struct lance_private *)dev->priv;
+	if (dev->interrupt)
+		printk("%s: Re-entering the interrupt handler.\n", dev->name);
+
+	dev->interrupt = 1;
+
+	outw(0x00, dev->base_addr + LANCE_ADDR);
+	while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600
+		   && --boguscnt >= 0) {
+		/* Acknowledge all of the current interrupt sources ASAP. */
+		outw(csr0 & ~0x004f, dev->base_addr + LANCE_DATA);
+
+		must_restart = 0;
+
+		if (lance_debug > 5)
+			printk("%s: interrupt  csr0=%#2.2x new csr=%#2.2x.\n",
+				   dev->name, csr0, inw(dev->base_addr + LANCE_DATA));
+
+		if (csr0 & 0x0400)			/* Rx interrupt */
+			lance_rx(dev);
+
+		if (csr0 & 0x0200) {		/* Tx-done interrupt */
+			int dirty_tx = lp->dirty_tx;
+
+			while (dirty_tx < lp->cur_tx) {
+				int entry = dirty_tx & TX_RING_MOD_MASK;
+				int status = lp->tx_ring[entry].base;
+			
+				if (status < 0)
+					break;			/* It still hasn't been Txed */
+
+				lp->tx_ring[entry].base = 0;
+
+				if (status & 0x40000000) {
+					/* There was an major error, log it. */
+					int err_status = lp->tx_ring[entry].misc;
+					lp->stats.tx_errors++;
+					if (err_status & 0x0400) lp->stats.tx_aborted_errors++;
+					if (err_status & 0x0800) lp->stats.tx_carrier_errors++;
+					if (err_status & 0x1000) lp->stats.tx_window_errors++;
+					if (err_status & 0x4000) {
+						/* Ackk!  On FIFO errors the Tx unit is turned off! */
+						lp->stats.tx_fifo_errors++;
+						/* Remove this verbosity later! */
+						printk("%s: Tx FIFO error! Status %4.4x.\n",
+							   dev->name, csr0);
+						/* Restart the chip. */
+						must_restart = 1;
+					}
+				} else {
+					if (status & 0x18000000)
+						lp->stats.collisions++;
+					lp->stats.tx_packets++;
+				}
+
+				/* We must free the original skb if it's not a data-only copy
+				   in the bounce buffer. */
+				if (lp->tx_skbuff[entry]) {
+					dev_kfree_skb(lp->tx_skbuff[entry],FREE_WRITE);
+					lp->tx_skbuff[entry] = 0;
+				}
+				dirty_tx++;
+			}
+
+#ifndef final_version
+			if (lp->cur_tx - dirty_tx >= TX_RING_SIZE) {
+				printk("out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
+					   dirty_tx, lp->cur_tx, lp->tx_full);
+				dirty_tx += TX_RING_SIZE;
+			}
+#endif
+
+			if (lp->tx_full && dev->tbusy
+				&& dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) {
+				/* The ring is no longer full, clear tbusy. */
+				lp->tx_full = 0;
+				dev->tbusy = 0;
+				mark_bh(NET_BH);
+			}
+
+			lp->dirty_tx = dirty_tx;
+		}
+
+		/* Log misc errors. */
+		if (csr0 & 0x4000) lp->stats.tx_errors++; /* Tx babble. */
+		if (csr0 & 0x1000) lp->stats.rx_errors++; /* Missed a Rx frame. */
+		if (csr0 & 0x0800) {
+			printk("%s: Bus master arbitration failure, status %4.4x.\n",
+				   dev->name, csr0);
+			/* Restart the chip. */
+			must_restart = 1;
+		}
+
+		if (must_restart) {
+			/* stop the chip to clear the error condition, then restart */
+			outw(0x0000, dev->base_addr + LANCE_ADDR);
+			outw(0x0004, dev->base_addr + LANCE_DATA);
+			lance_restart(dev, 0x0002, 0);
+		}
+	}
+
+	/* Clear any other interrupt, and set interrupt enable. */
+	outw(0x0000, dev->base_addr + LANCE_ADDR);
+	outw(0x7940, dev->base_addr + LANCE_DATA);
+
+	if (lance_debug > 4)
+		printk("%s: exiting interrupt, csr%d=%#4.4x.\n",
+			   dev->name, inw(ioaddr + LANCE_ADDR),
+			   inw(dev->base_addr + LANCE_DATA));
+
+	dev->interrupt = 0;
+	return;
+}
+
+static int
+lance_rx(struct device *dev)
+{
+	struct lance_private *lp = (struct lance_private *)dev->priv;
+	int entry = lp->cur_rx & RX_RING_MOD_MASK;
+	int i;
+		
+	/* If we own the next entry, it's a new packet. Send it up. */
+	while (lp->rx_ring[entry].base >= 0) {
+		int status = lp->rx_ring[entry].base >> 24;
+
+		if (status != 0x03) {			/* There was an error. */
+			/* There is a tricky error noted by John Murphy,
+			   <murf@perftech.com> to Russ Nelson: Even with full-sized
+			   buffers it's possible for a jabber packet to use two
+			   buffers, with only the last correctly noting the error. */
+			if (status & 0x01)	/* Only count a general error at the */
+				lp->stats.rx_errors++; /* end of a packet.*/
+			if (status & 0x20) lp->stats.rx_frame_errors++;
+			if (status & 0x10) lp->stats.rx_over_errors++;
+			if (status & 0x08) lp->stats.rx_crc_errors++;
+			if (status & 0x04) lp->stats.rx_fifo_errors++;
+			lp->rx_ring[entry].base &= 0x03ffffff;
+		}
+		else 
+		{
+			/* Malloc up new buffer, compatible with net3. */
+			short pkt_len = (lp->rx_ring[entry].msg_length & 0xfff)-4;
+			struct sk_buff *skb;
+			
+			if(pkt_len<60)
+			{
+				printk("%s: Runt packet!\n",dev->name);
+				lp->stats.rx_errors++;
+			}
+			else
+			{
+				skb = dev_alloc_skb(pkt_len+2);
+				if (skb == NULL) 
+				{
+					printk("%s: Memory squeeze, deferring packet.\n", dev->name);
+					for (i=0; i < RX_RING_SIZE; i++)
+						if (lp->rx_ring[(entry+i) & RX_RING_MOD_MASK].base < 0)
+							break;
+
+					if (i > RX_RING_SIZE -2) 
+					{
+						lp->stats.rx_dropped++;
+						lp->rx_ring[entry].base |= 0x80000000;
+						lp->cur_rx++;
+					}
+					break;
+				}
+				skb->dev = dev;
+				skb_reserve(skb,2);	/* 16 byte align */
+				skb_put(skb,pkt_len);	/* Make room */
+				eth_copy_and_sum(skb,
+					(unsigned char *)bus_to_virt((lp->rx_ring[entry].base & 0x00ffffff)),
+					pkt_len,0);
+				skb->protocol=eth_type_trans(skb,dev);
+				netif_rx(skb);
+				lp->stats.rx_packets++;
+			}
+		}
+		/* The docs say that the buffer length isn't touched, but Andrew Boyd
+		   of QNX reports that some revs of the 79C965 clear it. */
+		lp->rx_ring[entry].buf_length = -PKT_BUF_SZ;
+		lp->rx_ring[entry].base |= 0x80000000;
+		entry = (++lp->cur_rx) & RX_RING_MOD_MASK;
+	}
+
+	/* We should check that at least two ring entries are free.	 If not,
+	   we should free one and mark stats->rx_dropped++. */
+
+	return 0;
+}
+
+static int
+lance_close(struct device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct lance_private *lp = (struct lance_private *)dev->priv;
+	int i;
+
+	dev->start = 0;
+	dev->tbusy = 1;
+
+	if (chip_table[lp->chip_version].flags & LANCE_HAS_MISSED_FRAME) {
+		outw(112, ioaddr+LANCE_ADDR);
+		lp->stats.rx_missed_errors = inw(ioaddr+LANCE_DATA);
+	}
+	outw(0, ioaddr+LANCE_ADDR);
+
+	if (lance_debug > 1)
+		printk("%s: Shutting down ethercard, status was %2.2x.\n",
+			   dev->name, inw(ioaddr+LANCE_DATA));
+
+	/* We stop the LANCE here -- it occasionally polls
+	   memory if we don't. */
+	outw(0x0004, ioaddr+LANCE_DATA);
+
+	if (dev->dma != 4)
+		disable_dma(dev->dma);
+
+	free_irq(dev->irq, dev);
+
+	/* Free all the skbuffs in the Rx and Tx queues. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		struct sk_buff *skb = lp->rx_skbuff[i];
+		lp->rx_skbuff[i] = 0;
+		lp->rx_ring[i].base = 0;		/* Not owned by LANCE chip. */
+		if (skb) {
+			skb->free = 1;
+			dev_kfree_skb(skb, FREE_WRITE);
+		}
+	}
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		if (lp->tx_skbuff[i])
+			dev_kfree_skb(lp->tx_skbuff[i], FREE_WRITE);
+		lp->tx_skbuff[i] = 0;
+	}
+
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+static struct enet_statistics *
+lance_get_stats(struct device *dev)
+{
+	struct lance_private *lp = (struct lance_private *)dev->priv;
+	short ioaddr = dev->base_addr;
+	short saved_addr;
+	unsigned long flags;
+
+	if (chip_table[lp->chip_version].flags & LANCE_HAS_MISSED_FRAME) {
+		save_flags(flags);
+		cli();
+		saved_addr = inw(ioaddr+LANCE_ADDR);
+		outw(112, ioaddr+LANCE_ADDR);
+		lp->stats.rx_missed_errors = inw(ioaddr+LANCE_DATA);
+		outw(saved_addr, ioaddr+LANCE_ADDR);
+		restore_flags(flags);
+	}
+
+	return &lp->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ */
+
+static void set_multicast_list(struct device *dev)
+{
+	short ioaddr = dev->base_addr;
+
+	outw(0, ioaddr+LANCE_ADDR);
+	outw(0x0004, ioaddr+LANCE_DATA); /* Temporarily stop the lance.	 */
+
+	if (dev->flags&IFF_PROMISC) {
+		/* Log any net taps. */
+		printk("%s: Promiscuous mode enabled.\n", dev->name);
+		outw(15, ioaddr+LANCE_ADDR);
+		outw(0x8000, ioaddr+LANCE_DATA); /* Set promiscuous mode */
+	} else {
+		short multicast_table[4];
+		int i;
+		int num_addrs=dev->mc_count;
+		if(dev->flags&IFF_ALLMULTI)
+			num_addrs=1;
+		/* FIXIT: We don't use the multicast table, but rely on upper-layer filtering. */
+		memset(multicast_table, (num_addrs == 0) ? 0 : -1, sizeof(multicast_table));
+		for (i = 0; i < 4; i++) {
+			outw(8 + i, ioaddr+LANCE_ADDR);
+			outw(multicast_table[i], ioaddr+LANCE_DATA);
+		}
+		outw(15, ioaddr+LANCE_ADDR);
+		outw(0x0000, ioaddr+LANCE_DATA); /* Unset promiscuous mode */
+	}
+
+	lance_restart(dev, 0x0142, 0); /*  Resume normal operation */
+
+}
+
+
+/*
+ * Local variables:
+ *  compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c lance.c"
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */