1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 226 insertions, 0 deletions

diff --git a/linux/src/drivers/block/ide_modes.h b/linux/src/drivers/block/ide_modes.h
new file mode 100644
index 0000000..589fbfa
--- /dev/null
+++ b/linux/src/drivers/block/ide_modes.h
@@ -0,0 +1,226 @@
+#ifndef _IDE_MODES_H
+#define _IDE_MODES_H
+/*
+ *  linux/drivers/block/ide_modes.h
+ *
+ *  Copyright (C) 1996  Linus Torvalds, Igor Abramov, and Mark Lord
+ */
+
+#include <linux/config.h>
+
+/*
+ * Shared data/functions for determining best PIO mode for an IDE drive.
+ * Most of this stuff originally lived in cmd640.c, and changes to the
+ * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid
+ * breaking the fragile cmd640.c support.
+ */
+
+#if defined(CONFIG_BLK_DEV_CMD640) || defined(CONFIG_IDE_CHIPSETS)
+
+/*
+ * Standard (generic) timings for PIO modes, from ATA2 specification.
+ * These timings are for access to the IDE data port register *only*.
+ * Some drives may specify a mode, while also specifying a different
+ * value for cycle_time (from drive identification data).
+ */
+typedef struct ide_pio_timings_s {
+	int	setup_time;	/* Address setup (ns) minimum */
+	int	active_time;	/* Active pulse (ns) minimum */
+	int	cycle_time;	/* Cycle time (ns) minimum = (setup + active + recovery) */
+} ide_pio_timings_t;
+
+typedef struct ide_pio_data_s {
+	byte pio_mode;
+	byte use_iordy;
+	byte overridden;
+	byte blacklisted;
+	unsigned int cycle_time;
+} ide_pio_data_t;
+	
+#ifndef _IDE_C
+
+int ide_scan_pio_blacklist (char *model);
+byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d);
+extern const ide_pio_timings_t ide_pio_timings[6];
+
+#else /* _IDE_C */
+
+const ide_pio_timings_t ide_pio_timings[6] = {
+	{ 70,	165,	600 },	/* PIO Mode 0 */
+	{ 50,	125,	383 },	/* PIO Mode 1 */
+	{ 30,	100,	240 },	/* PIO Mode 2 */
+	{ 30,	80,	180 },	/* PIO Mode 3 with IORDY */
+	{ 25,	70,	120 },	/* PIO Mode 4 with IORDY */
+	{ 20,	50,	100 }	/* PIO Mode 5 with IORDY (nonstandard) */
+};
+
+/*
+ * Black list. Some drives incorrectly report their maximal PIO mode,
+ * at least in respect to CMD640. Here we keep info on some known drives.
+ */
+static struct ide_pio_info {
+	const char	*name;
+	int		pio;
+} ide_pio_blacklist [] = {
+/*	{ "Conner Peripherals 1275MB - CFS1275A", 4 }, */
+	{ "Conner Peripherals 540MB - CFS540A", 3 },
+
+	{ "WDC AC2700",  3 },
+	{ "WDC AC2540",  3 },
+	{ "WDC AC2420",  3 },
+	{ "WDC AC2340",  3 },
+	{ "WDC AC2250",  0 },
+	{ "WDC AC2200",  0 },
+	{ "WDC AC21200", 4 },
+	{ "WDC AC2120",  0 },
+	{ "WDC AC2850",  3 },
+	{ "WDC AC1270",  3 },
+	{ "WDC AC1170",  1 },
+	{ "WDC AC1210",  1 },
+	{ "WDC AC280",   0 },
+/*	{ "WDC AC21000", 4 }, */
+	{ "WDC AC31000", 3 },
+	{ "WDC AC31200", 3 },
+/*	{ "WDC AC31600", 4 }, */
+
+	{ "Maxtor 7131 AT", 1 },
+	{ "Maxtor 7171 AT", 1 },
+	{ "Maxtor 7213 AT", 1 },
+	{ "Maxtor 7245 AT", 1 },
+	{ "Maxtor 7345 AT", 1 },
+	{ "Maxtor 7546 AT", 3 },
+	{ "Maxtor 7540 AV", 3 },
+
+	{ "SAMSUNG SHD-3121A", 1 },
+	{ "SAMSUNG SHD-3122A", 1 },
+	{ "SAMSUNG SHD-3172A", 1 },
+
+/*	{ "ST51080A", 4 },
+ *	{ "ST51270A", 4 },
+ *	{ "ST31220A", 4 },
+ *	{ "ST31640A", 4 },
+ *	{ "ST32140A", 4 },
+ *	{ "ST3780A",  4 },
+ */
+	{ "ST5660A",  3 },
+	{ "ST3660A",  3 },
+	{ "ST3630A",  3 },
+	{ "ST3655A",  3 },
+	{ "ST3391A",  3 },
+	{ "ST3390A",  1 },
+	{ "ST3600A",  1 },
+	{ "ST3290A",  0 },
+	{ "ST3144A",  0 },
+
+	{ "QUANTUM ELS127A", 0 },
+	{ "QUANTUM ELS170A", 0 },
+	{ "QUANTUM LPS240A", 0 },
+	{ "QUANTUM LPS210A", 3 },
+	{ "QUANTUM LPS270A", 3 },
+	{ "QUANTUM LPS365A", 3 },
+	{ "QUANTUM LPS540A", 3 },
+	{ "QUANTUM LIGHTNING 540A", 3 },
+	{ "QUANTUM LIGHTNING 730A", 3 },
+	{ "QUANTUM FIREBALL", 3 }, /* For models 540/640/1080/1280 */
+				   /* 1080A works fine in mode4 with triton */
+	{ NULL,	0 }
+};
+
+/*
+ * This routine searches the ide_pio_blacklist for an entry
+ * matching the start/whole of the supplied model name.
+ *
+ * Returns -1 if no match found.
+ * Otherwise returns the recommended PIO mode from ide_pio_blacklist[].
+ */
+int ide_scan_pio_blacklist (char *model)
+{
+	struct ide_pio_info *p;
+
+	for (p = ide_pio_blacklist; p->name != NULL; p++) {
+		if (strncmp(p->name, model, strlen(p->name)) == 0)
+			return p->pio;
+	}
+	return -1;
+}
+
+/*
+ * This routine returns the recommended PIO settings for a given drive,
+ * based on the drive->id information and the ide_pio_blacklist[].
+ * This is used by most chipset support modules when "auto-tuning".
+ */
+
+/*
+ * Drive PIO mode auto selection
+ */
+byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d)
+{
+	int pio_mode;
+	int cycle_time = 0;
+	int use_iordy = 0;
+	struct hd_driveid* id = drive->id;
+	int overridden  = 0;
+	int blacklisted = 0;
+
+	if (mode_wanted != 255) {
+		pio_mode = mode_wanted;
+	} else if (!drive->id) {
+		pio_mode = 0;
+	} else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
+		overridden = 1;
+		blacklisted = 1;
+		use_iordy = (pio_mode > 2);
+	} else {
+		pio_mode = id->tPIO;
+		if (pio_mode > 2) {	/* 2 is maximum allowed tPIO value */
+			pio_mode = 2;
+			overridden = 1;
+		}
+		if (id->field_valid & 2) {	  /* drive implements ATA2? */
+			if (id->capability & 8) { /* drive supports use_iordy? */
+				use_iordy = 1;
+				cycle_time = id->eide_pio_iordy;
+				if (id->eide_pio_modes & 7) {
+					overridden = 0;
+					if (id->eide_pio_modes & 4)
+						pio_mode = 5;
+					else if (id->eide_pio_modes & 2)
+						pio_mode = 4;
+					else
+						pio_mode = 3;
+				}
+			} else {
+				cycle_time = id->eide_pio;
+			}
+		}
+
+		/*
+		 * Conservative "downgrade" for all pre-ATA2 drives
+		 */
+		if (pio_mode && pio_mode < 4) {
+			pio_mode--;
+			overridden = 1;
+#if 0
+			use_iordy = (pio_mode > 2);
+#endif
+			if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
+				cycle_time = 0; /* use standard timing */
+		}
+	}
+	if (pio_mode > max_mode) {
+		pio_mode = max_mode;
+		cycle_time = 0;
+	}
+	if (d) {
+		d->pio_mode = pio_mode;
+		d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
+		d->use_iordy = use_iordy;
+		d->overridden = overridden;
+		d->blacklisted = blacklisted;
+	}
+	return pio_mode;
+}
+
+#endif /* _IDE_C */
+#endif /* defined(CONFIG_BLK_DEV_CMD640) || defined(CONFIG_IDE_CHIPSETS) */
+#endif /* _IDE_MODES_H */