diff options
| author | Thomas Schwinge <tschwinge@gnu.org> | 2006-10-08 10:12:35 +0000 |
|---|---|---|
| committer | Thomas Schwinge <tschwinge@gnu.org> | 2009-06-18 00:26:42 +0200 |
| commit | 864d744d4754a602766d834fc12d336a8d9af236 (patch) | |
| tree | 1cb8d09203de1987a056d01548d623f8774576b2 /linux/dev | |
| parent | 846a52b57636580e3968616a6c6195cc595c24a0 (diff) | |
2006-10-08 Thomas Schwinge <tschwinge@gnu.org>
* linux/dev/drivers/block/ide.c: Move file...
* linux/src/drivers/block/ide.c: ... here.
Diffstat (limited to 'linux/dev')
| -rw-r--r-- | linux/dev/drivers/block/ide.c | 3839 |
1 files changed, 0 insertions, 3839 deletions
diff --git a/linux/dev/drivers/block/ide.c b/linux/dev/drivers/block/ide.c deleted file mode 100644 index 5dcd0aa..0000000 --- a/linux/dev/drivers/block/ide.c +++ /dev/null @@ -1,3839 +0,0 @@ -/* - * linux/drivers/block/ide.c Version 5.53 Jun 24, 1997 - * - * Copyright (C) 1994-1996 Linus Torvalds & authors (see below) - */ -#define _IDE_C /* needed by <linux/blk.h> */ - -/* - * Maintained by Mark Lord <mlord@pobox.com> - * and Gadi Oxman <gadio@netvision.net.il> - * - * This is the multiple IDE interface driver, as evolved from hd.c. - * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15). - * There can be up to two drives per interface, as per the ATA-2 spec. - * - * Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64 - * Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64 - * Tertiary: ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64 - * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64 - * - * It is easy to extend ide.c to handle more than four interfaces: - * - * Change the MAX_HWIFS constant in ide.h. - * - * Define some new major numbers (in major.h), and insert them into - * the ide_hwif_to_major table in ide.c. - * - * Fill in the extra values for the new interfaces into the two tables - * inside ide.c: default_io_base[] and default_irqs[]. - * - * Create the new request handlers by cloning "do_ide3_request()" - * for each new interface, and add them to the switch statement - * in the ide_init() function in ide.c. - * - * Recompile, create the new /dev/ entries, and it will probably work. - * - * From hd.c: - * | - * | It traverses the request-list, using interrupts to jump between functions. - * | As nearly all functions can be called within interrupts, we may not sleep. - * | Special care is recommended. Have Fun! - * | - * | modified by Drew Eckhardt to check nr of hd's from the CMOS. - * | - * | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug - * | in the early extended-partition checks and added DM partitions. - * | - * | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI). - * | - * | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", - * | and general streamlining by Mark Lord (mlord@pobox.com). - * - * October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by: - * - * Mark Lord (mlord@pobox.com) (IDE Perf.Pkg) - * Delman Lee (delman@mipg.upenn.edu) ("Mr. atdisk2") - * Scott Snyder (snyder@fnald0.fnal.gov) (ATAPI IDE cd-rom) - * - * This was a rewrite of just about everything from hd.c, though some original - * code is still sprinkled about. Think of it as a major evolution, with - * inspiration from lots of linux users, esp. hamish@zot.apana.org.au - * - * Version 1.0 ALPHA initial code, primary i/f working okay - * Version 1.3 BETA dual i/f on shared irq tested & working! - * Version 1.4 BETA added auto probing for irq(s) - * Version 1.5 BETA added ALPHA (untested) support for IDE cd-roms, - * ... - * Version 3.5 correct the bios_cyl field if it's too small - * (linux 1.1.76) (to help fdisk with brain-dead BIOSs) - * Version 3.6 cosmetic corrections to comments and stuff - * (linux 1.1.77) reorganise probing code to make it understandable - * added halfway retry to probing for drive identification - * added "hdx=noprobe" command line option - * allow setting multmode even when identification fails - * Version 3.7 move set_geometry=1 from do_identify() to ide_init() - * increase DRQ_WAIT to eliminate nuisance messages - * wait for DRQ_STAT instead of DATA_READY during probing - * (courtesy of Gary Thomas gary@efland.UU.NET) - * Version 3.8 fixed byte-swapping for confused Mitsumi cdrom drives - * update of ide-cd.c from Scott, allows blocksize=1024 - * cdrom probe fixes, inspired by jprang@uni-duisburg.de - * Version 3.9 don't use LBA if lba_capacity looks funny - * correct the drive capacity calculations - * fix probing for old Seagates without IDE_ALTSTATUS_REG - * fix byte-ordering for some NEC cdrom drives - * Version 3.10 disable multiple mode by default; was causing trouble - * Version 3.11 fix mis-identification of old WD disks as cdroms - * Version 3,12 simplify logic for selecting initial mult_count - * (fixes problems with buggy WD drives) - * Version 3.13 remove excess "multiple mode disabled" messages - * Version 3.14 fix ide_error() handling of BUSY_STAT - * fix byte-swapped cdrom strings (again.. arghh!) - * ignore INDEX bit when checking the ALTSTATUS reg - * Version 3.15 add SINGLE_THREADED flag for use with dual-CMD i/f - * ignore WRERR_STAT for non-write operations - * added vlb_sync support for DC-2000A & others, - * (incl. some Promise chips), courtesy of Frank Gockel - * Version 3.16 convert vlb_32bit and vlb_sync into runtime flags - * add ioctls to get/set VLB flags (HDIO_[SG]ET_CHIPSET) - * rename SINGLE_THREADED to SUPPORT_SERIALIZE, - * add boot flag to "serialize" operation for CMD i/f - * add optional support for DTC2278 interfaces, - * courtesy of andy@cercle.cts.com (Dyan Wile). - * add boot flag to enable "dtc2278" probe - * add probe to avoid EATA (SCSI) interfaces, - * courtesy of neuffer@goofy.zdv.uni-mainz.de. - * Version 4.00 tidy up verify_area() calls - heiko@colossus.escape.de - * add flag to ignore WRERR_STAT for some drives - * courtesy of David.H.West@um.cc.umich.edu - * assembly syntax tweak to vlb_sync - * removable drive support from scuba@cs.tu-berlin.de - * add transparent support for DiskManager-6.0x "Dynamic - * Disk Overlay" (DDO), most of this is in genhd.c - * eliminate "multiple mode turned off" message at boot - * Version 4.10 fix bug in ioctl for "hdparm -c3" - * fix DM6:DDO support -- now works with LILO, fdisk, ... - * don't treat some naughty WD drives as removable - * Version 4.11 updated DM6 support using info provided by OnTrack - * Version 5.00 major overhaul, multmode setting fixed, vlb_sync fixed - * added support for 3rd/4th/alternative IDE ports - * created ide.h; ide-cd.c now compiles separate from ide.c - * hopefully fixed infinite "unexpected_intr" from cdroms - * zillions of other changes and restructuring - * somehow reduced overall memory usage by several kB - * probably slowed things down slightly, but worth it - * Version 5.01 AT LAST!! Finally understood why "unexpected_intr" - * was happening at various times/places: whenever the - * ide-interface's ctl_port was used to "mask" the irq, - * it also would trigger an edge in the process of masking - * which would result in a self-inflicted interrupt!! - * (such a stupid way to build a hardware interrupt mask). - * This is now fixed (after a year of head-scratching). - * Version 5.02 got rid of need for {enable,disable}_irq_list() - * Version 5.03 tune-ups, comments, remove "busy wait" from drive resets - * removed PROBE_FOR_IRQS option -- no longer needed - * OOOPS! fixed "bad access" bug for 2nd drive on an i/f - * Version 5.04 changed "ira %d" to "irq %d" in DEBUG message - * added more comments, cleaned up unexpected_intr() - * OOOPS! fixed null pointer problem in ide reset code - * added autodetect for Triton chipset -- no effect yet - * Version 5.05 OOOPS! fixed bug in revalidate_disk() - * OOOPS! fixed bug in ide_do_request() - * added ATAPI reset sequence for cdroms - * Version 5.10 added Bus-Mastered DMA support for Triton Chipset - * some (mostly) cosmetic changes - * Version 5.11 added ht6560b support by malafoss@snakemail.hut.fi - * reworked PCI scanning code - * added automatic RZ1000 detection/support - * added automatic PCI CMD640 detection/support - * added option for VLB CMD640 support - * tweaked probe to find cdrom on hdb with disks on hda,hdc - * Version 5.12 some performance tuning - * added message to alert user to bad /dev/hd[cd] entries - * OOOPS! fixed bug in atapi reset - * driver now forces "serialize" again for all cmd640 chips - * noticed REALLY_SLOW_IO had no effect, moved it to ide.c - * made do_drive_cmd() into public ide_do_drive_cmd() - * Version 5.13 fixed typo ('B'), thanks to houston@boyd.geog.mcgill.ca - * fixed ht6560b support - * Version 5.13b (sss) fix problem in calling ide_cdrom_setup() - * don't bother invalidating nonexistent partitions - * Version 5.14 fixes to cmd640 support.. maybe it works now(?) - * added & tested full EZ-DRIVE support -- don't use LILO! - * don't enable 2nd CMD640 PCI port during init - conflict - * Version 5.15 bug fix in init_cmd640_vlb() - * bug fix in interrupt sharing code - * Version 5.16 ugh.. fix "serialize" support, broken in 5.15 - * remove "Huh?" from cmd640 code - * added qd6580 interface speed select from Colten Edwards - * Version 5.17 kludge around bug in BIOS32 on Intel triton motherboards - * Version 5.18 new CMD640 code, moved to cmd640.c, #include'd for now - * new UMC8672 code, moved to umc8672.c, #include'd for now - * disallow turning on DMA when h/w not capable of DMA - * Version 5.19 fix potential infinite timeout on resets - * extend reset poll into a general purpose polling scheme - * add atapi tape drive support from Gadi Oxman - * simplify exit from _intr routines -- no IDE_DO_REQUEST - * Version 5.20 leave current rq on blkdev request list during I/O - * generalized ide_do_drive_cmd() for tape/cdrom driver use - * Version 5.21 fix nasty cdrom/tape bug (ide_preempt was messed up) - * Version 5.22 fix ide_xlate_1024() to work with/without drive->id - * Version 5.23 miscellaneous touch-ups - * Version 5.24 fix #if's for SUPPORT_CMD640 - * Version 5.25 more touch-ups, fix cdrom resets, ... - * cmd640.c now configs/compiles separate from ide.c - * Version 5.26 keep_settings now maintains the using_dma flag - * fix [EZD] remap message to only output at boot time - * fix "bad /dev/ entry" message to say hdc, not hdc0 - * fix ide_xlate_1024() to respect user specified CHS - * use CHS from partn table if it looks translated - * re-merged flags chipset,vlb_32bit,vlb_sync into io_32bit - * keep track of interface chipset type, when known - * add generic PIO mode "tuneproc" mechanism - * fix cmd640_vlb option - * fix ht6560b support (was completely broken) - * umc8672.c now configures/compiles separate from ide.c - * move dtc2278 support to dtc2278.c - * move ht6560b support to ht6560b.c - * move qd6580 support to qd6580.c - * add ali14xx support in ali14xx.c - * Version 5.27 add [no]autotune parameters to help cmd640 - * move rz1000 support to rz1000.c - * Version 5.28 #include "ide_modes.h" - * fix disallow_unmask: now per-interface "no_unmask" bit - * force io_32bit to be the same on drive pairs of dtc2278 - * improved IDE tape error handling, and tape DMA support - * bugfix in ide_do_drive_cmd() for cdroms + serialize - * Version 5.29 fixed non-IDE check for too many physical heads - * don't use LBA if capacity is smaller than CHS - * Version 5.30 remove real_devices kludge, formerly used by genhd.c - * Version 5.32 change "KB" to "kB" - * fix serialize (was broken in kernel 1.3.72) - * add support for "hdparm -I" - * use common code for disk/tape/cdrom IDE_DRIVE_CMDs - * add support for Promise DC4030VL caching card - * improved serialize support - * put partition check back into alphabetical order - * add config option for PCMCIA baggage - * try to make PCMCIA support safer to use - * improve security on ioctls(): all are suser() only - * Version 5.33 improve handling of HDIO_DRIVE_CMDs that read data - * Version 5.34 fix irq-sharing problem from 5.33 - * fix cdrom ioctl problem from 5.33 - * Version 5.35 cosmetic changes - * fix cli() problem in try_to_identify() - * Version 5.36 fixes to optional PCMCIA support - * Version 5.37 don't use DMA when "noautotune" is specified - * Version 5.37a (go) fix shared irq probing (was broken in kernel 1.3.72) - * call unplug_device() from ide_do_drive_cmd() - * Version 5.38 add "hdx=none" option, courtesy of Joel Maslak - * mask drive irq after use, if sharing with another hwif - * add code to help debug weird cmd640 problems - * Version 5.39 fix horrible error in earlier irq sharing "fix" - * Version 5.40 fix serialization -- was broken in 5.39 - * help sharing by masking device irq after probing - * Version 5.41 more fixes to irq sharing/serialize detection - * disable io_32bit by default on drive reset - * Version 5.42 simplify irq-masking after probe - * fix NULL pointer deref in save_match() - * Version 5.43 Ugh.. unexpected_intr is back: try to exterminate it - * Version 5.44 Fix for "irq probe failed" on cmd640 - * change path on message regarding MAKEDEV.ide - * add a throttle to the unexpected_intr() messages - * Version 5.45 fix ugly parameter parsing bugs (thanks Derek) - * include Gadi's magic fix for cmd640 unexpected_intr - * include mc68000 patches from Geert Uytterhoeven - * add Gadi's fix for PCMCIA cdroms - * Version 5.46 remove the mc68000 #ifdefs for 2.0.x - * Version 5.47 fix set_tune race condition - * fix bug in earlier PCMCIA cdrom update - * Version 5.48 if def'd, invoke CMD640_DUMP_REGS when irq probe fails - * lengthen the do_reset1() pulse, for laptops - * add idebus=xx parameter for cmd640 and ali chipsets - * no_unmask flag now per-drive instead of per-hwif - * fix tune_req so that it gets done immediately - * fix missing restore_flags() in ide_ioctl - * prevent use of io_32bit on cmd640 with no prefetch - * Version 5.49 fix minor quirks in probing routines - * Version 5.50 allow values as small as 20 for idebus= - * Version 5.51 force non io_32bit in drive_cmd_intr() - * change delay_10ms() to delay_50ms() to fix problems - * Version 5.52 fix incorrect invalidation of removable devices - * add "hdx=slow" command line option - * Version 5.53 add ATAPI floppy drive support - * change default media for type 0 to floppy - * add support for Exabyte Nest - * add missing set_blocksize() in revalidate_disk() - * handle bad status bit sequencing in ide_wait_stat() - * support partition table translations with 255 heads - * probe all interfaces by default - * add probe for the i82371AB chipset - * acknowledge media change on removable drives - * add work-around for BMI drives - * remove "LBA" from boot messages - * Version 5.53.1 add UDMA "CRC retry" support - * Version 5.53.2 add Promise/33 auto-detection and DMA support - * fix MC_ERR handling - * fix mis-detection of NEC cdrom as floppy - * issue ATAPI reset and re-probe after "no response" - * - * Some additional driver compile-time options are in ide.h - * - * To do, in likely order of completion: - * - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f -*/ - -#undef REALLY_SLOW_IO /* most systems can safely undef this */ - -#include <linux/config.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/major.h> -#include <linux/blkdev.h> -#include <linux/errno.h> -#include <linux/hdreg.h> -#include <linux/genhd.h> -#include <linux/malloc.h> - -#include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/segment.h> -#include <asm/io.h> - -#ifdef CONFIG_PCI -#include <linux/bios32.h> -#include <linux/pci.h> -#endif /* CONFIG_PCI */ - -#include "ide.h" -#include "ide_modes.h" - -#ifdef CONFIG_BLK_DEV_PROMISE -#include "promise.h" -#define IS_PROMISE_DRIVE (HWIF(drive)->chipset == ide_promise) -#else -#define IS_PROMISE_DRIVE (0) /* auto-NULLs out Promise code */ -#endif /* CONFIG_BLK_DEV_PROMISE */ - -static const byte ide_hwif_to_major[MAX_HWIFS] = {IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR}; -static const unsigned short default_io_base[MAX_HWIFS] = {0x1f0, 0x170, 0x1e8, 0x168}; -static const byte default_irqs[MAX_HWIFS] = {14, 15, 11, 10}; -static int idebus_parameter; /* holds the "idebus=" parameter */ -static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ - -/* - * This is declared extern in ide.h, for access by other IDE modules: - */ -ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ - -#if (DISK_RECOVERY_TIME > 0) -/* - * For really screwy hardware (hey, at least it *can* be used with Linux) - * we can enforce a minimum delay time between successive operations. - */ -static unsigned long read_timer(void) -{ - unsigned long t, flags; - int i; - - save_flags(flags); - cli(); - t = jiffies * 11932; - outb_p(0, 0x43); - i = inb_p(0x40); - i |= inb(0x40) << 8; - restore_flags(flags); - return (t - i); -} - -static void set_recovery_timer (ide_hwif_t *hwif) -{ - hwif->last_time = read_timer(); -} -#define SET_RECOVERY_TIMER(drive) set_recovery_timer (drive) - -#else - -#define SET_RECOVERY_TIMER(drive) - -#endif /* DISK_RECOVERY_TIME */ - - -/* - * Do not even *think* about calling this! - */ -static void init_hwif_data (unsigned int index) -{ - byte *p; - unsigned int unit; - ide_hwif_t *hwif = &ide_hwifs[index]; - - /* bulk initialize hwif & drive info with zeros */ - p = ((byte *) hwif) + sizeof(ide_hwif_t); - do { - *--p = 0; - } while (p > (byte *) hwif); - - /* fill in any non-zero initial values */ - hwif->index = index; - hwif->io_base = default_io_base[index]; - hwif->ctl_port = hwif->io_base ? hwif->io_base+0x206 : 0x000; -#ifdef CONFIG_BLK_DEV_HD - if (hwif->io_base == HD_DATA) - hwif->noprobe = 1; /* may be overridden by ide_setup() */ -#endif /* CONFIG_BLK_DEV_HD */ - hwif->major = ide_hwif_to_major[index]; - hwif->name[0] = 'i'; - hwif->name[1] = 'd'; - hwif->name[2] = 'e'; - hwif->name[3] = '0' + index; -#ifdef CONFIG_BLK_DEV_IDETAPE - hwif->tape_drive = NULL; -#endif /* CONFIG_BLK_DEV_IDETAPE */ - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; - - drive->select.all = (unit<<4)|0xa0; - drive->hwif = hwif; - drive->ctl = 0x08; - drive->ready_stat = READY_STAT; - drive->bad_wstat = BAD_W_STAT; - drive->special.b.recalibrate = 1; - drive->special.b.set_geometry = 1; - drive->name[0] = 'h'; - drive->name[1] = 'd'; -#ifdef MACH - drive->name[2] = '0' + (index * MAX_DRIVES) + unit; -#else - drive->name[2] = 'a' + (index * MAX_DRIVES) + unit; -#endif - } -} - -/* - * init_ide_data() sets reasonable default values into all fields - * of all instances of the hwifs and drives, but only on the first call. - * Subsequent calls have no effect (they don't wipe out anything). - * - * This routine is normally called at driver initialization time, - * but may also be called MUCH earlier during kernel "command-line" - * parameter processing. As such, we cannot depend on any other parts - * of the kernel (such as memory allocation) to be functioning yet. - * - * This is too bad, as otherwise we could dynamically allocate the - * ide_drive_t structs as needed, rather than always consuming memory - * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them. - */ -#define MAGIC_COOKIE 0x12345678 -static void init_ide_data (void) -{ - unsigned int index; - static unsigned long magic_cookie = MAGIC_COOKIE; - - if (magic_cookie != MAGIC_COOKIE) - return; /* already initialized */ - magic_cookie = 0; - - for (index = 0; index < MAX_HWIFS; ++index) - init_hwif_data(index); - - idebus_parameter = 0; - system_bus_speed = 0; -} - -/* - * ide_system_bus_speed() returns what we think is the system VESA/PCI - * bus speed (in Mhz). This is used for calculating interface PIO timings. - * The default is 40 for known PCI systems, 50 otherwise. - * The "idebus=xx" parameter can be used to override this value. - * The actual value to be used is computed/displayed the first time through. - */ -int ide_system_bus_speed (void) -{ - if (!system_bus_speed) { - if (idebus_parameter) - system_bus_speed = idebus_parameter; /* user supplied value */ -#ifdef CONFIG_PCI - else if (pcibios_present()) - system_bus_speed = 40; /* safe default value for PCI */ -#endif /* CONFIG_PCI */ - else - system_bus_speed = 50; /* safe default value for VESA and PCI */ - printk("ide: Assuming %dMhz system bus speed for PIO modes; override with idebus=xx\n", system_bus_speed); - } - return system_bus_speed; -} - -#if SUPPORT_VLB_SYNC -/* - * Some localbus EIDE interfaces require a special access sequence - * when using 32-bit I/O instructions to transfer data. We call this - * the "vlb_sync" sequence, which consists of three successive reads - * of the sector count register location, with interrupts disabled - * to ensure that the reads all happen together. - */ -static inline void do_vlb_sync (unsigned short port) { - (void) inb (port); - (void) inb (port); - (void) inb (port); -} -#endif /* SUPPORT_VLB_SYNC */ - -/* - * This is used for most PIO data transfers *from* the IDE interface - */ -void ide_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount) -{ - unsigned short io_base = HWIF(drive)->io_base; - unsigned short data_reg = io_base+IDE_DATA_OFFSET; - byte io_32bit = drive->io_32bit; - - if (io_32bit) { -#if SUPPORT_VLB_SYNC - if (io_32bit & 2) { - cli(); - do_vlb_sync(io_base+IDE_NSECTOR_OFFSET); - insl(data_reg, buffer, wcount); - if (drive->unmask) - sti(); - } else -#endif /* SUPPORT_VLB_SYNC */ - insl(data_reg, buffer, wcount); - } else { -#if SUPPORT_SLOW_DATA_PORTS - if (drive->slow) { - unsigned short *ptr = (unsigned short *) buffer; - while (wcount--) { - *ptr++ = inw_p(data_reg); - *ptr++ = inw_p(data_reg); - } - } else -#endif /* SUPPORT_SLOW_DATA_PORTS */ - insw(data_reg, buffer, wcount<<1); - } -} - -/* - * This is used for most PIO data transfers *to* the IDE interface - */ -void ide_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount) -{ - unsigned short io_base = HWIF(drive)->io_base; - unsigned short data_reg = io_base+IDE_DATA_OFFSET; - byte io_32bit = drive->io_32bit; - - if (io_32bit) { -#if SUPPORT_VLB_SYNC - if (io_32bit & 2) { - cli(); - do_vlb_sync(io_base+IDE_NSECTOR_OFFSET); - outsl(data_reg, buffer, wcount); - if (drive->unmask) - sti(); - } else -#endif /* SUPPORT_VLB_SYNC */ - outsl(data_reg, buffer, wcount); - } else { -#if SUPPORT_SLOW_DATA_PORTS - if (drive->slow) { - unsigned short *ptr = (unsigned short *) buffer; - while (wcount--) { - outw_p(*ptr++, data_reg); - outw_p(*ptr++, data_reg); - } - } else -#endif /* SUPPORT_SLOW_DATA_PORTS */ - outsw(data_reg, buffer, wcount<<1); - } -} - -/* - * The following routines are mainly used by the ATAPI drivers. - * - * These routines will round up any request for an odd number of bytes, - * so if an odd bytecount is specified, be sure that there's at least one - * extra byte allocated for the buffer. - */ -void atapi_input_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount) -{ - ++bytecount; - ide_input_data (drive, buffer, bytecount / 4); - if ((bytecount & 0x03) >= 2) - insw (IDE_DATA_REG, ((byte *)buffer) + (bytecount & ~0x03), 1); -} - -void atapi_output_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount) -{ - ++bytecount; - ide_output_data (drive, buffer, bytecount / 4); - if ((bytecount & 0x03) >= 2) - outsw (IDE_DATA_REG, ((byte *)buffer) + (bytecount & ~0x03), 1); -} - -/* - * This should get invoked any time we exit the driver to - * wait for an interrupt response from a drive. handler() points - * at the appropriate code to handle the next interrupt, and a - * timer is started to prevent us from waiting forever in case - * something goes wrong (see the timer_expiry() handler later on). - */ -void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout) -{ - ide_hwgroup_t *hwgroup = HWGROUP(drive); -#ifdef DEBUG - if (hwgroup->handler != NULL) { - printk("%s: ide_set_handler: handler not null; old=%p, new=%p\n", - drive->name, hwgroup->handler, handler); - } -#endif - hwgroup->handler = handler; - hwgroup->timer.expires = jiffies + timeout; - add_timer(&(hwgroup->timer)); -} - -/* - * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" - * value for this drive (from its reported identification information). - * - * Returns: 1 if lba_capacity looks sensible - * 0 otherwise - */ -static int lba_capacity_is_ok (struct hd_driveid *id) -{ - unsigned long lba_sects = id->lba_capacity; - unsigned long chs_sects = id->cyls * id->heads * id->sectors; - unsigned long _10_percent = chs_sects / 10; - - /* very large drives (8GB+) may lie about the number of cylinders */ - if (id->cyls == 16383 && id->heads == 16 && id->sectors == 63 && lba_sects > chs_sects) { - return 1; /* lba_capacity is our only option */ - } - /* perform a rough sanity check on lba_sects: within 10% is "okay" */ - if ((lba_sects - chs_sects) < _10_percent) - return 1; /* lba_capacity is good */ - - /* some drives have the word order reversed */ - lba_sects = (lba_sects << 16) | (lba_sects >> 16); - if ((lba_sects - chs_sects) < _10_percent) { - id->lba_capacity = lba_sects; /* fix it */ - return 1; /* lba_capacity is (now) good */ - } - return 0; /* lba_capacity value is bad */ -} - -/* - * current_capacity() returns the capacity (in sectors) of a drive - * according to its current geometry/LBA settings. - */ -static unsigned long current_capacity (ide_drive_t *drive) -{ - struct hd_driveid *id = drive->id; - unsigned long capacity = drive->cyl * drive->head * drive->sect; - - if (!drive->present) - return 0; -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - if (drive->media == ide_floppy) - return idefloppy_capacity(drive); -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ - if (drive->media != ide_disk) - return 0x7fffffff; /* cdrom or tape */ - drive->select.b.lba = 0; - /* Determine capacity, and use LBA if the drive properly supports it */ - if (id != NULL && (id->capability & 2) && lba_capacity_is_ok(id)) { - if (id->lba_capacity >= capacity) { - capacity = id->lba_capacity; - drive->select.b.lba = 1; - } - } - return (capacity - drive->sect0); -} - -/* - * ide_geninit() is called exactly *once* for each major, from genhd.c, - * at the beginning of the initial partition check for the drives. - */ -static void ide_geninit (struct gendisk *gd) -{ - unsigned int unit; - ide_hwif_t *hwif = gd->real_devices; - - for (unit = 0; unit < gd->nr_real; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; -#ifdef CONFIG_BLK_DEV_IDECD - if (drive->present && drive->media == ide_cdrom) - ide_cdrom_setup(drive); -#endif /* CONFIG_BLK_DEV_IDECD */ -#ifdef CONFIG_BLK_DEV_IDETAPE - if (drive->present && drive->media == ide_tape) - idetape_setup(drive); -#endif /* CONFIG_BLK_DEV_IDETAPE */ -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - if (drive->present && drive->media == ide_floppy) - idefloppy_setup(drive); -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ - drive->part[0].nr_sects = current_capacity(drive); - if (!drive->present || (drive->media != ide_disk && drive->media != ide_floppy) || - !drive->part[0].nr_sects) { - drive->part[0].start_sect = -1; /* skip partition check */ - } - } -} - -/* - * init_gendisk() (as opposed to ide_geninit) is called for each major device, - * after probing for drives, to allocate partition tables and other data - * structures needed for the routines in genhd.c. ide_geninit() gets called - * somewhat later, during the partition check. - */ -static void init_gendisk (ide_hwif_t *hwif) -{ - struct gendisk *gd, **gdp; - unsigned int unit, units, minors; - int *bs; - - /* figure out maximum drive number on the interface */ - for (units = MAX_DRIVES; units > 0; --units) { - if (hwif->drives[units-1].present) - break; - } - minors = units * (1<<PARTN_BITS); - gd = kmalloc (sizeof(struct gendisk), GFP_KERNEL); - gd->sizes = kmalloc (minors * sizeof(int), GFP_KERNEL); - gd->part = kmalloc (minors * sizeof(struct hd_struct), GFP_KERNEL); - bs = kmalloc (minors*sizeof(int), GFP_KERNEL); - - memset(gd->part, 0, minors * sizeof(struct hd_struct)); - - /* cdroms and msdos f/s are examples of non-1024 blocksizes */ - blksize_size[hwif->major] = bs; - for (unit = 0; unit < minors; ++unit) - *bs++ = BLOCK_SIZE; - - for (unit = 0; unit < units; ++unit) - hwif->drives[unit].part = &gd->part[unit << PARTN_BITS]; - - gd->major = hwif->major; /* our major device number */ - gd->major_name = IDE_MAJOR_NAME; /* treated special in genhd.c */ - gd->minor_shift = PARTN_BITS; /* num bits for partitions */ - gd->max_p = 1<<PARTN_BITS; /* 1 + max partitions / drive */ - gd->max_nr = units; /* max num real drives */ - gd->nr_real = units; /* current num real drives */ - gd->init = ide_geninit; /* initialization function */ - gd->real_devices= hwif; /* ptr to internal data */ - gd->next = NULL; /* linked list of major devs */ - - for (gdp = &gendisk_head; *gdp; gdp = &((*gdp)->next)) ; - hwif->gd = *gdp = gd; /* link onto tail of list */ -} - -static void do_reset1 (ide_drive_t *, int); /* needed below */ - -#ifdef CONFIG_BLK_DEV_IDEATAPI -/* - * atapi_reset_pollfunc() gets invoked to poll the interface for completion every 50ms - * during an atapi drive reset operation. If the drive has not yet responded, - * and we have not yet hit our maximum waiting time, then the timer is restarted - * for another 50ms. - */ -static void atapi_reset_pollfunc (ide_drive_t *drive) -{ - ide_hwgroup_t *hwgroup = HWGROUP(drive); - byte stat; - - OUT_BYTE (drive->select.all, IDE_SELECT_REG); - udelay (10); - - if (OK_STAT(stat=GET_STAT(), 0, BUSY_STAT)) { - printk("%s: ATAPI reset complete\n", drive->name); - } else { - if (jiffies < hwgroup->poll_timeout) { - ide_set_handler (drive, &atapi_reset_pollfunc, HZ/20); - return; /* continue polling */ - } - hwgroup->poll_timeout = 0; /* end of polling */ - printk("%s: ATAPI reset timed-out, status=0x%02x\n", drive->name, stat); - do_reset1 (drive, 1); /* do it the old fashioned way */ - return; - } - hwgroup->poll_timeout = 0; /* done polling */ -} -#endif /* CONFIG_BLK_DEV_IDEATAPI */ - -/* - * reset_pollfunc() gets invoked to poll the interface for completion every 50ms - * during an ide reset operation. If the drives have not yet responded, - * and we have not yet hit our maximum waiting time, then the timer is restarted - * for another 50ms. - */ -static void reset_pollfunc (ide_drive_t *drive) -{ - ide_hwgroup_t *hwgroup = HWGROUP(drive); - ide_hwif_t *hwif = HWIF(drive); - byte tmp; - - if (!OK_STAT(tmp=GET_STAT(), 0, BUSY_STAT)) { - if (jiffies < hwgroup->poll_timeout) { - ide_set_handler (drive, &reset_pollfunc, HZ/20); - return; /* continue polling */ - } - printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp); - } else { - printk("%s: reset: ", hwif->name); - if ((tmp = GET_ERR()) == 1) - printk("success\n"); - else { -#if FANCY_STATUS_DUMPS - printk("master: "); - switch (tmp & 0x7f) { - case 1: printk("passed"); - break; - case 2: printk("formatter device error"); - break; - case 3: printk("sector buffer error"); - break; - case 4: printk("ECC circuitry error"); - break; - case 5: printk("controlling MPU error"); - break; - default:printk("error (0x%02x?)", tmp); - } - if (tmp & 0x80) - printk("; slave: failed"); - printk("\n"); -#else - printk("failed\n"); -#endif /* FANCY_STATUS_DUMPS */ - } - } - hwgroup->poll_timeout = 0; /* done polling */ -} - -/* - * do_reset1() attempts to recover a confused drive by resetting it. - * Unfortunately, resetting a disk drive actually resets all devices on - * the same interface, so it can really be thought of as resetting the - * interface rather than resetting the drive. - * - * ATAPI devices have their own reset mechanism which allows them to be - * individually reset without clobbering other devices on the same interface. - * - * Unfortunately, the IDE interface does not generate an interrupt to let - * us know when the reset operation has finished, so we must poll for this. - * Equally poor, though, is the fact that this may a very long time to complete, - * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, - * we set a timer to poll at 50ms intervals. - */ -static void do_reset1 (ide_drive_t *drive, int do_not_try_atapi) -{ - unsigned int unit; - unsigned long flags; - ide_hwif_t *hwif = HWIF(drive); - ide_hwgroup_t *hwgroup = HWGROUP(drive); - - save_flags(flags); - cli(); /* Why ? */ - -#ifdef CONFIG_BLK_DEV_IDEATAPI - /* For an ATAPI device, first try an ATAPI SRST. */ - if (drive->media != ide_disk) { - if (!do_not_try_atapi) { - if (!drive->keep_settings) { - drive->unmask = 0; - drive->io_32bit = 0; - } - OUT_BYTE (drive->select.all, IDE_SELECT_REG); - udelay (20); - OUT_BYTE (WIN_SRST, IDE_COMMAND_REG); - hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; - ide_set_handler (drive, &atapi_reset_pollfunc, HZ/20); - restore_flags (flags); - return; - } - } -#endif /* CONFIG_BLK_DEV_IDEATAPI */ - - /* - * First, reset any device state data we were maintaining - * for any of the drives on this interface. - */ - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *rdrive = &hwif->drives[unit]; -#ifdef CONFIG_BLK_DEV_IDETAPE - if (rdrive->media == ide_tape) - rdrive->tape.reset_issued = 1; -#endif /* CONFIG_BLK_DEV_IDETAPE */ - rdrive->special.all = 0; - rdrive->special.b.set_geometry = 1; - rdrive->special.b.recalibrate = 1; - if (OK_TO_RESET_CONTROLLER) - rdrive->mult_count = 0; - if (!rdrive->keep_settings) { - rdrive->mult_req = 0; - rdrive->unmask = 0; - rdrive->io_32bit = 0; - if (rdrive->using_dma) { - rdrive->using_dma = 0; - printk("%s: disabled DMA\n", rdrive->name); - } - } - if (rdrive->mult_req != rdrive->mult_count) - rdrive->special.b.set_multmode = 1; - } - -#if OK_TO_RESET_CONTROLLER - /* - * Note that we also set nIEN while resetting the device, - * to mask unwanted interrupts from the interface during the reset. - * However, due to the design of PC hardware, this will cause an - * immediate interrupt due to the edge transition it produces. - * This single interrupt gives us a "fast poll" for drives that - * recover from reset very quickly, saving us the first 50ms wait time. - */ - OUT_BYTE(drive->ctl|6,IDE_CONTROL_REG); /* set SRST and nIEN */ - udelay(10); /* more than enough time */ - OUT_BYTE(drive->ctl|2,IDE_CONTROL_REG); /* clear SRST, leave nIEN */ - udelay(10); /* more than enough time */ - hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; - ide_set_handler (drive, &reset_pollfunc, HZ/20); -#endif /* OK_TO_RESET_CONTROLLER */ - - restore_flags (flags); -} - -/* - * ide_do_reset() is the entry point to the drive/interface reset code. - */ -void ide_do_reset (ide_drive_t *drive) -{ - do_reset1 (drive, 0); -#ifdef CONFIG_BLK_DEV_IDETAPE - if (drive->media == ide_tape) - drive->tape.reset_issued=1; -#endif /* CONFIG_BLK_DEV_IDETAPE */ -} - -/* - * Clean up after success/failure of an explicit drive cmd - */ -void ide_end_drive_cmd (ide_drive_t *drive, byte stat, byte err) -{ - unsigned long flags; - struct request *rq = HWGROUP(drive)->rq; - - if (rq->cmd == IDE_DRIVE_CMD) { - byte *args = (byte *) rq->buffer; - rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT); - if (args) { - args[0] = stat; - args[1] = err; - args[2] = IN_BYTE(IDE_NSECTOR_REG); - } - } - save_flags(flags); - cli(); - blk_dev[MAJOR(rq->rq_dev)].current_request = rq->next; - HWGROUP(drive)->rq = NULL; - rq->rq_status = RQ_INACTIVE; - if (rq->sem != NULL) - up(rq->sem); - restore_flags(flags); -} - -/* - * Error reporting, in human readable form (luxurious, but a memory hog). - */ -byte ide_dump_status (ide_drive_t *drive, const char *msg, byte stat) -{ - unsigned long flags; - byte err = 0; - - save_flags (flags); - sti(); - printk("%s: %s: status=0x%02x", drive->name, msg, stat); -#if FANCY_STATUS_DUMPS - if (drive->media == ide_disk) { - printk(" { "); - if (stat & BUSY_STAT) - printk("Busy "); - else { - if (stat & READY_STAT) printk("DriveReady "); - if (stat & WRERR_STAT) printk("DeviceFault "); - if (stat & SEEK_STAT) printk("SeekComplete "); - if (stat & DRQ_STAT) printk("DataRequest "); - if (stat & ECC_STAT) printk("CorrectedError "); - if (stat & INDEX_STAT) printk("Index "); - if (stat & ERR_STAT) printk("Error "); - } - printk("}"); - } -#endif /* FANCY_STATUS_DUMPS */ - printk("\n"); - if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { - err = GET_ERR(); - printk("%s: %s: error=0x%02x", drive->name, msg, err); -#if FANCY_STATUS_DUMPS - if (drive->media == ide_disk) { - printk(" { "); - if (err & ICRC_ERR) printk((err & ABRT_ERR) ? "BadCRC " : "BadSector "); - if (err & ECC_ERR) printk("UncorrectableError "); - if (err & ID_ERR) printk("SectorIdNotFound "); - if (err & ABRT_ERR) printk("DriveStatusError "); - if (err & TRK0_ERR) printk("TrackZeroNotFound "); - if (err & MARK_ERR) printk("AddrMarkNotFound "); - printk("}"); - if (err & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) { - byte cur = IN_BYTE(IDE_SELECT_REG); - if (cur & 0x40) { /* using LBA? */ - printk(", LBAsect=%ld", (unsigned long) - ((cur&0xf)<<24) - |(IN_BYTE(IDE_HCYL_REG)<<16) - |(IN_BYTE(IDE_LCYL_REG)<<8) - | IN_BYTE(IDE_SECTOR_REG)); - } else { - printk(", CHS=%d/%d/%d", - (IN_BYTE(IDE_HCYL_REG)<<8) + - IN_BYTE(IDE_LCYL_REG), - cur & 0xf, - IN_BYTE(IDE_SECTOR_REG)); - } - if (HWGROUP(drive)->rq) - printk(", sector=%ld", HWGROUP(drive)->rq->sector); - } - } -#endif /* FANCY_STATUS_DUMPS */ - printk("\n"); - } - restore_flags (flags); - return err; -} - -/* - * try_to_flush_leftover_data() is invoked in response to a drive - * unexpectedly having its DRQ_STAT bit set. As an alternative to - * resetting the drive, this routine tries to clear the condition - * by read a sector's worth of data from the drive. Of course, - * this may not help if the drive is *waiting* for data from *us*. - */ -static void try_to_flush_leftover_data (ide_drive_t *drive) -{ - int i = (drive->mult_count ? drive->mult_count : 1) * SECTOR_WORDS; - - while (i > 0) { - unsigned long buffer[16]; - unsigned int wcount = (i > 16) ? 16 : i; - i -= wcount; - ide_input_data (drive, buffer, wcount); - } -} - -/* - * ide_error() takes action based on the error returned by the controller. - */ -void ide_error (ide_drive_t *drive, const char *msg, byte stat) -{ - struct request *rq; - byte err; - - err = ide_dump_status(drive, msg, stat); - if ((rq = HWGROUP(drive)->rq) == NULL || drive == NULL) - return; - /* retry only "normal" I/O: */ - if (rq->cmd == IDE_DRIVE_CMD) { - rq->errors = 1; - ide_end_drive_cmd(drive, stat, err); - return; - } - if (stat & BUSY_STAT) { /* other bits are useless when BUSY */ - rq->errors |= ERROR_RESET; - } else { - if (drive->media == ide_disk && (stat & ERR_STAT)) { - /* err has different meaning on cdrom and tape */ - if (err == ABRT_ERR) { - if (drive->select.b.lba && IN_BYTE(IDE_COMMAND_REG) == WIN_SPECIFY) - return; /* some newer drives don't support WIN_SPECIFY */ - } else if ((err & (ABRT_ERR | ICRC_ERR)) == (ABRT_ERR | ICRC_ERR)) - ; /* UDMA crc error -- just retry the operation */ - else if (err & (BBD_ERR | ECC_ERR)) /* retries won't help these */ - rq->errors = ERROR_MAX; - else if (err & TRK0_ERR) /* help it find track zero */ - rq->errors |= ERROR_RECAL; - else if (err & MC_ERR) - drive->special.b.mc = 1; - } - if ((stat & DRQ_STAT) && rq->cmd != WRITE) - try_to_flush_leftover_data(drive); - } - if (GET_STAT() & (BUSY_STAT|DRQ_STAT)) - rq->errors |= ERROR_RESET; /* Mmmm.. timing problem */ - - if (rq->errors >= ERROR_MAX) { -#ifdef CONFIG_BLK_DEV_IDETAPE - if (drive->media == ide_tape) { - rq->errors = 0; - idetape_end_request(0, HWGROUP(drive)); - } else -#endif /* CONFIG_BLK_DEV_IDETAPE */ -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - if (drive->media == ide_floppy) { - rq->errors = 0; - idefloppy_end_request(0, HWGROUP(drive)); - } else -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ -#ifdef CONFIG_BLK_DEV_IDESCSI - if (drive->media == ide_scsi) { - rq->errors = 0; - idescsi_end_request(0, HWGROUP(drive)); - } else -#endif /* CONFIG_BLK_DEV_IDESCSI */ - ide_end_request(0, HWGROUP(drive)); - } - else { - if ((rq->errors & ERROR_RESET) == ERROR_RESET) { - ++rq->errors; - ide_do_reset(drive); - return; - } else if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) - drive->special.b.recalibrate = 1; - ++rq->errors; - } -} - -/* - * read_intr() is the handler for disk read/multread interrupts - */ -static void read_intr (ide_drive_t *drive) -{ - byte stat; - int i; - unsigned int msect, nsect; - struct request *rq; - - if (!OK_STAT(stat=GET_STAT(),DATA_READY,BAD_R_STAT)) { - ide_error(drive, "read_intr", stat); - return; - } - msect = drive->mult_count; -read_next: - rq = HWGROUP(drive)->rq; - if (msect) { - if ((nsect = rq->current_nr_sectors) > msect) - nsect = msect; - msect -= nsect; - } else - nsect = 1; - i = rq->nr_sectors - nsect; - if (i > 0 && !msect) - ide_set_handler (drive, &read_intr, WAIT_CMD); - ide_input_data(drive, rq->buffer, nsect * SECTOR_WORDS); -#ifdef DEBUG - printk("%s: read: sectors(%ld-%ld), buffer=0x%08lx, remaining=%ld\n", - drive->name, rq->sector, rq->sector+nsect-1, - (unsigned long) rq->buffer+(nsect<<9), rq->nr_sectors-nsect); -#endif - rq->sector += nsect; - rq->buffer += nsect<<9; - rq->errors = 0; - rq->nr_sectors = i; - if ((rq->current_nr_sectors -= nsect) <= 0) - ide_end_request(1, HWGROUP(drive)); - if (i > 0 && msect) - goto read_next; -} - -/* - * write_intr() is the handler for disk write interrupts - */ -static void write_intr (ide_drive_t *drive) -{ - byte stat; - int i; - ide_hwgroup_t *hwgroup = HWGROUP(drive); - struct request *rq = hwgroup->rq; - - if (OK_STAT(stat=GET_STAT(),DRIVE_READY,drive->bad_wstat)) { -#ifdef DEBUG - printk("%s: write: sector %ld, buffer=0x%08lx, remaining=%ld\n", - drive->name, rq->sector, (unsigned long) rq->buffer, - rq->nr_sectors-1); -#endif - if ((rq->nr_sectors == 1) ^ ((stat & DRQ_STAT) != 0)) { - rq->sector++; - rq->buffer += 512; - rq->errors = 0; - i = --rq->nr_sectors; - --rq->current_nr_sectors; - if (rq->current_nr_sectors <= 0) - ide_end_request(1, hwgroup); - if (i > 0) { - ide_set_handler (drive, &write_intr, WAIT_CMD); - ide_output_data (drive, rq->buffer, SECTOR_WORDS); - } - return; - } - } - ide_error(drive, "write_intr", stat); -} - -/* - * ide_multwrite() transfers a block of up to mcount sectors of data - * to a drive as part of a disk multiple-sector write operation. - */ -void ide_multwrite (ide_drive_t *drive, unsigned int mcount) -{ - struct request *rq = &HWGROUP(drive)->wrq; - - do { - unsigned int nsect = rq->current_nr_sectors; - if (nsect > mcount) - nsect = mcount; - mcount -= nsect; - - ide_output_data(drive, rq->buffer, nsect<<7); -#ifdef DEBUG - printk("%s: multwrite: sector %ld, buffer=0x%08lx, count=%d, remaining=%ld\n", - drive->name, rq->sector, (unsigned long) rq->buffer, - nsect, rq->nr_sectors - nsect); -#endif - if ((rq->nr_sectors -= nsect) <= 0) - break; - if ((rq->current_nr_sectors -= nsect) == 0) { - if ((rq->bh = rq->bh->b_reqnext) != NULL) { - rq->current_nr_sectors = rq->bh->b_size>>9; - rq->buffer = rq->bh->b_data; - } else { - panic("%s: buffer list corrupted\n", drive->name); - break; - } - } else { - rq->buffer += nsect << 9; - } - } while (mcount); -} - -/* - * multwrite_intr() is the handler for disk multwrite interrupts - */ -static void multwrite_intr (ide_drive_t *drive) -{ - byte stat; - int i; - ide_hwgroup_t *hwgroup = HWGROUP(drive); - struct request *rq = &hwgroup->wrq; - - if (OK_STAT(stat=GET_STAT(),DRIVE_READY,drive->bad_wstat)) { - if (stat & DRQ_STAT) { - if (rq->nr_sectors) { - ide_set_handler (drive, &multwrite_intr, WAIT_CMD); - ide_multwrite(drive, drive->mult_count); - return; - } - } else { - if (!rq->nr_sectors) { /* all done? */ - rq = hwgroup->rq; - for (i = rq->nr_sectors; i > 0;){ - i -= rq->current_nr_sectors; - ide_end_request(1, hwgroup); - } - return; - } - } - } - ide_error(drive, "multwrite_intr", stat); -} - -/* - * Issue a simple drive command - * The drive must be selected beforehand. - */ -static void ide_cmd(ide_drive_t *drive, byte cmd, byte nsect, ide_handler_t *handler) -{ - ide_set_handler (drive, handler, WAIT_CMD); - OUT_BYTE(drive->ctl,IDE_CONTROL_REG); - OUT_BYTE(nsect,IDE_NSECTOR_REG); - OUT_BYTE(cmd,IDE_COMMAND_REG); -} - -/* - * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. - */ -static void set_multmode_intr (ide_drive_t *drive) -{ - byte stat = GET_STAT(); - - sti(); - if (OK_STAT(stat,READY_STAT,BAD_STAT)) { - drive->mult_count = drive->mult_req; - } else { - drive->mult_req = drive->mult_count = 0; - drive->special.b.recalibrate = 1; - (void) ide_dump_status(drive, "set_multmode", stat); - } -} - -/* - * set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd. - */ -static void set_geometry_intr (ide_drive_t *drive) -{ - byte stat = GET_STAT(); - - sti(); - if (!OK_STAT(stat,READY_STAT,BAD_STAT)) - ide_error(drive, "set_geometry_intr", stat); -} - -/* - * recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd. - */ -static void recal_intr (ide_drive_t *drive) -{ - byte stat = GET_STAT(); - - sti(); - if (!OK_STAT(stat,READY_STAT,BAD_STAT)) - ide_error(drive, "recal_intr", stat); -} - -/* - * mc_intr() is invoked on completion of a WIN_ACKMC cmd. - */ -static void mc_intr (ide_drive_t *drive) -{ - byte stat = GET_STAT(); - - sti(); - if (!OK_STAT(stat,READY_STAT,BAD_STAT)) - ide_error(drive, "mc_intr", stat); - drive->special.b.mc = 0; -} - -/* - * drive_cmd_intr() is invoked on completion of a special DRIVE_CMD. - */ -static void drive_cmd_intr (ide_drive_t *drive) -{ - struct request *rq = HWGROUP(drive)->rq; - byte *args = (byte *) rq->buffer; - byte stat = GET_STAT(); - - sti(); - if ((stat & DRQ_STAT) && args && args[3]) { - byte io_32bit = drive->io_32bit; - drive->io_32bit = 0; - ide_input_data(drive, &args[4], args[3] * SECTOR_WORDS); - drive->io_32bit = io_32bit; - stat = GET_STAT(); - } - if (OK_STAT(stat,READY_STAT,BAD_STAT)) - ide_end_drive_cmd (drive, stat, GET_ERR()); - else - ide_error(drive, "drive_cmd", stat); /* calls ide_end_drive_cmd */ -} - -/* - * do_special() is used to issue WIN_SPECIFY, WIN_RESTORE, and WIN_SETMULT - * commands to a drive. It used to do much more, but has been scaled back. - */ -static inline void do_special (ide_drive_t *drive) -{ - special_t *s = &drive->special; - -#ifdef DEBUG - printk("%s: do_special: 0x%02x\n", drive->name, s->all); -#endif - if (s->b.set_geometry) { - s->b.set_geometry = 0; - if (drive->media == ide_disk && !drive->no_geom) { - OUT_BYTE(drive->sect,IDE_SECTOR_REG); - OUT_BYTE(drive->cyl,IDE_LCYL_REG); - OUT_BYTE(drive->cyl>>8,IDE_HCYL_REG); - OUT_BYTE(((drive->head-1)|drive->select.all)&0xBF,IDE_SELECT_REG); - if (!IS_PROMISE_DRIVE) - ide_cmd(drive, WIN_SPECIFY, drive->sect, &set_geometry_intr); - } - } else if (s->b.recalibrate) { - s->b.recalibrate = 0; - if (drive->media == ide_disk && !IS_PROMISE_DRIVE) - ide_cmd(drive, WIN_RESTORE, drive->sect, &recal_intr); - } else if (s->b.set_tune) { - ide_tuneproc_t *tuneproc = HWIF(drive)->tuneproc; - s->b.set_tune = 0; - if (tuneproc != NULL) - tuneproc(drive, drive->tune_req); - } else if (s->b.set_multmode) { - s->b.set_multmode = 0; - if (drive->media == ide_disk) { - if (drive->id && drive->mult_req > drive->id->max_multsect) - drive->mult_req = drive->id->max_multsect; - if (!IS_PROMISE_DRIVE) - ide_cmd(drive, WIN_SETMULT, drive->mult_req, &set_multmode_intr); - } else - drive->mult_req = 0; - } else if (s->b.mc) { - s->b.mc = 0; - if (drive->media == ide_disk && !IS_PROMISE_DRIVE) - ide_cmd(drive, WIN_ACKMC, drive->sect, &mc_intr); - } else if (s->all) { - int special = s->all; - s->all = 0; - printk("%s: bad special flag: 0x%02x\n", drive->name, special); - } -} - -/* - * This routine busy-waits for the drive status to be not "busy". - * It then checks the status for all of the "good" bits and none - * of the "bad" bits, and if all is okay it returns 0. All other - * cases return 1 after invoking ide_error() -- caller should just return. - * - * This routine should get fixed to not hog the cpu during extra long waits.. - * That could be done by busy-waiting for the first jiffy or two, and then - * setting a timer to wake up at half second intervals thereafter, - * until timeout is achieved, before timing out. - */ -int ide_wait_stat (ide_drive_t *drive, byte good, byte bad, unsigned long timeout) -{ - byte stat; - unsigned long flags; - - udelay(1); /* spec allows drive 400ns to assert "BUSY" */ - if ((stat = GET_STAT()) & BUSY_STAT) { - save_flags(flags); - sti(); - timeout += jiffies; - while ((stat = GET_STAT()) & BUSY_STAT) { - if (jiffies > timeout) { - restore_flags(flags); - ide_error(drive, "status timeout", stat); - return 1; - } - } - restore_flags(flags); - } - udelay(1); /* allow status to settle, then read it again */ - if (OK_STAT((stat = GET_STAT()), good, bad)) - return 0; - ide_error(drive, "status error", stat); - return 1; -} - -/* - * do_rw_disk() issues READ and WRITE commands to a disk, - * using LBA if supported, or CHS otherwise, to address sectors. - * It also takes care of issuing special DRIVE_CMDs. - */ -static inline void do_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned short io_base = hwif->io_base; -#ifdef CONFIG_BLK_DEV_PROMISE - int use_promise_io = 0; -#endif /* CONFIG_BLK_DEV_PROMISE */ - - OUT_BYTE(drive->ctl,IDE_CONTROL_REG); - OUT_BYTE(rq->nr_sectors,io_base+IDE_NSECTOR_OFFSET); -#ifdef CONFIG_BLK_DEV_PROMISE - if (IS_PROMISE_DRIVE) { - if (hwif->is_promise2 || rq->cmd == READ) { - use_promise_io = 1; - } - } - if (drive->select.b.lba || use_promise_io) { -#else /* !CONFIG_BLK_DEV_PROMISE */ - if (drive->select.b.lba) { -#endif /* CONFIG_BLK_DEV_PROMISE */ -#ifdef DEBUG - printk("%s: %sing: LBAsect=%ld, sectors=%ld, buffer=0x%08lx\n", - drive->name, (rq->cmd==READ)?"read":"writ", - block, rq->nr_sectors, (unsigned long) rq->buffer); -#endif - OUT_BYTE(block,io_base+IDE_SECTOR_OFFSET); - OUT_BYTE(block>>=8,io_base+IDE_LCYL_OFFSET); - OUT_BYTE(block>>=8,io_base+IDE_HCYL_OFFSET); - OUT_BYTE(((block>>8)&0x0f)|drive->select.all,io_base+IDE_SELECT_OFFSET); - } else { - unsigned int sect,head,cyl,track; - track = block / drive->sect; - sect = block % drive->sect + 1; - OUT_BYTE(sect,io_base+IDE_SECTOR_OFFSET); - head = track % drive->head; - cyl = track / drive->head; - OUT_BYTE(cyl,io_base+IDE_LCYL_OFFSET); - OUT_BYTE(cyl>>8,io_base+IDE_HCYL_OFFSET); - OUT_BYTE(head|drive->select.all,io_base+IDE_SELECT_OFFSET); -#ifdef DEBUG - printk("%s: %sing: CHS=%d/%d/%d, sectors=%ld, buffer=0x%08lx\n", - drive->name, (rq->cmd==READ)?"read":"writ", cyl, - head, sect, rq->nr_sectors, (unsigned long) rq->buffer); -#endif - } -#ifdef CONFIG_BLK_DEV_PROMISE - if (use_promise_io) { - do_promise_io (drive, rq); - return; - } -#endif /* CONFIG_BLK_DEV_PROMISE */ - if (rq->cmd == READ) { -#ifdef CONFIG_BLK_DEV_TRITON - if (drive->using_dma && !(HWIF(drive)->dmaproc(ide_dma_read, drive))) - return; -#endif /* CONFIG_BLK_DEV_TRITON */ - ide_set_handler(drive, &read_intr, WAIT_CMD); - OUT_BYTE(drive->mult_count ? WIN_MULTREAD : WIN_READ, io_base+IDE_COMMAND_OFFSET); - return; - } - if (rq->cmd == WRITE) { -#ifdef CONFIG_BLK_DEV_TRITON - if (drive->using_dma && !(HWIF(drive)->dmaproc(ide_dma_write, drive))) - return; -#endif /* CONFIG_BLK_DEV_TRITON */ - OUT_BYTE(drive->mult_count ? WIN_MULTWRITE : WIN_WRITE, io_base+IDE_COMMAND_OFFSET); - if (ide_wait_stat(drive, DATA_READY, drive->bad_wstat, WAIT_DRQ)) { - printk("%s: no DRQ after issuing %s\n", drive->name, - drive->mult_count ? "MULTWRITE" : "WRITE"); - return; - } - if (!drive->unmask) - cli(); - if (drive->mult_count) { - HWGROUP(drive)->wrq = *rq; /* scratchpad */ - ide_set_handler (drive, &multwrite_intr, WAIT_CMD); - ide_multwrite(drive, drive->mult_count); - } else { - ide_set_handler (drive, &write_intr, WAIT_CMD); - ide_output_data(drive, rq->buffer, SECTOR_WORDS); - } - return; - } - printk("%s: bad command: %d\n", drive->name, rq->cmd); - ide_end_request(0, HWGROUP(drive)); -} - -/* - * execute_drive_cmd() issues a special drive command, - * usually initiated by ioctl() from the external hdparm program. - */ -static void execute_drive_cmd (ide_drive_t *drive, struct request *rq) -{ - byte *args = rq->buffer; - if (args) { -#ifdef DEBUG - printk("%s: DRIVE_CMD cmd=0x%02x sc=0x%02x fr=0x%02x xx=0x%02x\n", - drive->name, args[0], args[1], args[2], args[3]); -#endif - OUT_BYTE(args[2],IDE_FEATURE_REG); - ide_cmd(drive, args[0], args[1], &drive_cmd_intr); - return; - } else { - /* - * NULL is actually a valid way of waiting for - * all current requests to be flushed from the queue. - */ -#ifdef DEBUG - printk("%s: DRIVE_CMD (null)\n", drive->name); -#endif - ide_end_drive_cmd(drive, GET_STAT(), GET_ERR()); - return; - } -} - -/* - * do_request() initiates handling of a new I/O request - */ -static inline void do_request (ide_hwif_t *hwif, struct request *rq) -{ - unsigned int minor, unit; - unsigned long block, blockend; - ide_drive_t *drive; - - sti(); -#ifdef DEBUG - printk("%s: do_request: current=0x%08lx\n", hwif->name, (unsigned long) rq); -#endif - minor = MINOR(rq->rq_dev); - unit = minor >> PARTN_BITS; - if (MAJOR(rq->rq_dev) != hwif->major || unit >= MAX_DRIVES) { - printk("%s: bad device number: %s\n", - hwif->name, kdevname(rq->rq_dev)); - goto kill_rq; - } - drive = &hwif->drives[unit]; -#ifdef DEBUG - if (rq->bh && !buffer_locked(rq->bh)) { - printk("%s: block not locked\n", drive->name); - goto kill_rq; - } -#endif - block = rq->sector; - blockend = block + rq->nr_sectors; - if ((blockend < block) || (blockend > drive->part[minor&PARTN_MASK].nr_sects)) { -#ifdef MACH - printk ("%s%c: bad access: block=%ld, count=%ld, blockend=%ld, nr_sects%ld\n", - drive->name, (minor&PARTN_MASK)?'0'+(minor&PARTN_MASK):' ', - block, rq->nr_sectors, blockend, drive->part[minor&PARTN_MASK].nr_sects); -#else - printk("%s%c: bad access: block=%ld, count=%ld\n", drive->name, - (minor&PARTN_MASK)?'0'+(minor&PARTN_MASK):' ', block, rq->nr_sectors); -#endif - goto kill_rq; - } - block += drive->part[minor&PARTN_MASK].start_sect + drive->sect0; -#if FAKE_FDISK_FOR_EZDRIVE - if (block == 0 && drive->remap_0_to_1) - block = 1; /* redirect MBR access to EZ-Drive partn table */ -#endif /* FAKE_FDISK_FOR_EZDRIVE */ - ((ide_hwgroup_t *)hwif->hwgroup)->drive = drive; -#if (DISK_RECOVERY_TIME > 0) - while ((read_timer() - hwif->last_time) < DISK_RECOVERY_TIME); -#endif - -#ifdef CONFIG_BLK_DEV_IDETAPE - POLL_HWIF_TAPE_DRIVE; /* macro from ide-tape.h */ -#endif /* CONFIG_BLK_DEV_IDETAPE */ - - SELECT_DRIVE(hwif,drive); - if (ide_wait_stat(drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) { - printk("%s: drive not ready for command\n", drive->name); - return; - } - - if (!drive->special.all) { - if (rq->cmd == IDE_DRIVE_CMD) { - execute_drive_cmd(drive, rq); - return; - } -#ifdef CONFIG_BLK_DEV_IDEATAPI - switch (drive->media) { - case ide_disk: - do_rw_disk (drive, rq, block); - return; -#ifdef CONFIG_BLK_DEV_IDECD - case ide_cdrom: - ide_do_rw_cdrom (drive, block); - return; -#endif /* CONFIG_BLK_DEV_IDECD */ -#ifdef CONFIG_BLK_DEV_IDETAPE - case ide_tape: - idetape_do_request (drive, rq, block); - return; -#endif /* CONFIG_BLK_DEV_IDETAPE */ -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - case ide_floppy: - idefloppy_do_request (drive, rq, block); - return; -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ -#ifdef CONFIG_BLK_DEV_IDESCSI - case ide_scsi: - idescsi_do_request (drive, rq, block); - return; -#endif /* CONFIG_BLK_DEV_IDESCSI */ - - default: - printk("%s: media type %d not supported\n", - drive->name, drive->media); - goto kill_rq; - } -#else - do_rw_disk (drive, rq, block); /* simpler and faster */ - return; -#endif /* CONFIG_BLK_DEV_IDEATAPI */ - } - do_special(drive); - return; -kill_rq: - ide_end_request(0, hwif->hwgroup); -} - -/* - * The driver enables interrupts as much as possible. In order to do this, - * (a) the device-interrupt is always masked before entry, and - * (b) the timeout-interrupt is always disabled before entry. - * - * If we enter here from, say irq14, and then start a new request for irq15, - * (possible with "serialize" option) then we cannot ensure that we exit - * before the irq15 hits us. So, we must be careful not to let this bother us. - * - * Interrupts are still masked (by default) whenever we are exchanging - * data/cmds with a drive, because some drives seem to have very poor - * tolerance for latency during I/O. For devices which don't suffer from - * this problem (most don't), the unmask flag can be set using the "hdparm" - * utility, to permit other interrupts during data/cmd transfers. - */ -void ide_do_request (ide_hwgroup_t *hwgroup) -{ - cli(); /* paranoia */ - if (hwgroup->handler != NULL) { - printk("%s: EEeekk!! handler not NULL in ide_do_request()\n", hwgroup->hwif->name); - return; - } - do { - ide_hwif_t *hwif = hwgroup->hwif; - struct request *rq; - if ((rq = hwgroup->rq) == NULL) { - if (hwif->sharing_irq && hwgroup->drive) /* set nIEN */ - OUT_BYTE(hwgroup->drive->ctl|2,hwif->ctl_port); - /* - * hwgroup->next_hwif is different from hwgroup->hwif - * only when a request is inserted using "ide_next". - * This saves wear and tear on IDE tapes. - */ - hwif = hwgroup->next_hwif; - do { - rq = blk_dev[hwif->major].current_request; - if (rq != NULL && rq->rq_status != RQ_INACTIVE) - goto got_rq; - } while ((hwif = hwif->next) != hwgroup->next_hwif); - hwgroup->active = 0; - return; /* no work left for this hwgroup */ - } - got_rq: - do_request(hwgroup->hwif = hwgroup->next_hwif = hwif, hwgroup->rq = rq); - cli(); - } while (hwgroup->handler == NULL); -} - -/* - * do_hwgroup_request() invokes ide_do_request() after first masking - * all possible interrupts for the current hwgroup. This prevents race - * conditions in the event that an unexpected interrupt occurs while - * we are in the driver. - * - * Note that when an interrupt is used to reenter the driver, the first level - * handler will already have masked the irq that triggered, but any other ones - * for the hwgroup will still be unmasked. The driver tries to be careful - * about such things. - */ -static void do_hwgroup_request (ide_hwgroup_t *hwgroup) -{ - if (hwgroup->handler == NULL) { - ide_hwif_t *hgif = hwgroup->hwif; - ide_hwif_t *hwif = hgif; - hwgroup->active = 1; - do { - disable_irq(hwif->irq); - } while ((hwif = hwif->next) != hgif); - ide_do_request (hwgroup); - do { - enable_irq(hwif->irq); - } while ((hwif = hwif->next) != hgif); - } -} - -static void do_ide0_request (void) /* invoked with cli() */ -{ - do_hwgroup_request (ide_hwifs[0].hwgroup); -} - -#if MAX_HWIFS > 1 -static void do_ide1_request (void) /* invoked with cli() */ -{ - do_hwgroup_request (ide_hwifs[1].hwgroup); -} -#endif - -#if MAX_HWIFS > 2 -static void do_ide2_request (void) /* invoked with cli() */ -{ - do_hwgroup_request (ide_hwifs[2].hwgroup); -} -#endif - -#if MAX_HWIFS > 3 -static void do_ide3_request (void) /* invoked with cli() */ -{ - do_hwgroup_request (ide_hwifs[3].hwgroup); -} -#endif - -static void timer_expiry (unsigned long data) -{ - ide_hwgroup_t *hwgroup = (ide_hwgroup_t *) data; - ide_drive_t *drive = hwgroup->drive; - unsigned long flags; - - save_flags(flags); - cli(); - - if (hwgroup->poll_timeout != 0) { /* polling in progress? */ - ide_handler_t *handler = hwgroup->handler; - hwgroup->handler = NULL; - handler(drive); - } else if (hwgroup->handler == NULL) { /* not waiting for anything? */ - sti(); /* drive must have responded just as the timer expired */ - printk("%s: marginal timeout\n", drive->name); - } else { - hwgroup->handler = NULL; /* abort the operation */ - if (hwgroup->hwif->dmaproc) - (void) hwgroup->hwif->dmaproc (ide_dma_abort, drive); - ide_error(drive, "irq timeout", GET_STAT()); - } - if (hwgroup->handler == NULL) - do_hwgroup_request (hwgroup); - restore_flags(flags); -} - -/* - * There's nothing really useful we can do with an unexpected interrupt, - * other than reading the status register (to clear it), and logging it. - * There should be no way that an irq can happen before we're ready for it, - * so we needn't worry much about losing an "important" interrupt here. - * - * On laptops (and "green" PCs), an unexpected interrupt occurs whenever the - * drive enters "idle", "standby", or "sleep" mode, so if the status looks - * "good", we just ignore the interrupt completely. - * - * This routine assumes cli() is in effect when called. - * - * If an unexpected interrupt happens on irq15 while we are handling irq14 - * and if the two interfaces are "serialized" (CMD640), then it looks like - * we could screw up by interfering with a new request being set up for irq15. - * - * In reality, this is a non-issue. The new command is not sent unless the - * drive is ready to accept one, in which case we know the drive is not - * trying to interrupt us. And ide_set_handler() is always invoked before - * completing the issuance of any new drive command, so we will not be - * accidently invoked as a result of any valid command completion interrupt. - * - */ -static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup) -{ - byte stat; - unsigned int unit; - ide_hwif_t *hwif = hwgroup->hwif; - - /* - * handle the unexpected interrupt - */ - do { - if (hwif->irq == irq) { - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; - if (!drive->present) - continue; - SELECT_DRIVE(hwif,drive); - udelay(100); /* Ugly, but wait_stat() may not be safe here */ - if (!OK_STAT(stat=GET_STAT(), drive->ready_stat, BAD_STAT)) { - /* Try to not flood the console with msgs */ - static unsigned long last_msgtime = 0; - if ((last_msgtime + (HZ/2)) < jiffies) { - last_msgtime = jiffies; - (void) ide_dump_status(drive, "unexpected_intr", stat); - } - } - if ((stat & DRQ_STAT)) - try_to_flush_leftover_data(drive); - } - } - } while ((hwif = hwif->next) != hwgroup->hwif); - SELECT_DRIVE(hwif,hwgroup->drive); /* Ugh.. probably interrupts current I/O */ - udelay(100); /* Ugly, but wait_stat() may not be safe here */ -} - -/* - * entry point for all interrupts, caller does cli() for us - */ -void ide_intr (int irq, void *dev_id, struct pt_regs *regs) -{ - ide_hwgroup_t *hwgroup = dev_id; - ide_handler_t *handler; - - if (irq == hwgroup->hwif->irq && (handler = hwgroup->handler) != NULL) { - ide_drive_t *drive = hwgroup->drive; - hwgroup->handler = NULL; - del_timer(&(hwgroup->timer)); - if (drive->unmask) - sti(); - handler(drive); - cli(); /* this is necessary, as next rq may be different irq */ - if (hwgroup->handler == NULL) { - SET_RECOVERY_TIMER(HWIF(drive)); - ide_do_request(hwgroup); - } - } else { - unexpected_intr(irq, hwgroup); - } - cli(); -} - -/* - * get_info_ptr() returns the (ide_drive_t *) for a given device number. - * It returns NULL if the given device number does not match any present drives. - */ -static ide_drive_t *get_info_ptr (kdev_t i_rdev) -{ - int major = MAJOR(i_rdev); - unsigned int h; - - for (h = 0; h < MAX_HWIFS; ++h) { - ide_hwif_t *hwif = &ide_hwifs[h]; - if (hwif->present && major == hwif->major) { - unsigned unit = DEVICE_NR(i_rdev); - if (unit < MAX_DRIVES) { - ide_drive_t *drive = &hwif->drives[unit]; - if (drive->present) - return drive; - } else if (major == IDE0_MAJOR && unit < 4) { - printk("ide: probable bad entry for /dev/hd%c\n", 'a'+unit); - printk("ide: to fix it, run: /usr/src/linux/scripts/MAKEDEV.ide\n"); - } - break; - } - } - return NULL; -} - -/* - * This function is intended to be used prior to invoking ide_do_drive_cmd(). - */ -void ide_init_drive_cmd (struct request *rq) -{ - rq->buffer = NULL; - rq->cmd = IDE_DRIVE_CMD; - rq->sector = 0; - rq->nr_sectors = 0; - rq->current_nr_sectors = 0; - rq->sem = NULL; - rq->bh = NULL; - rq->bhtail = NULL; - rq->next = NULL; - -#if 0 /* these are done each time through ide_do_drive_cmd() */ - rq->errors = 0; - rq->rq_status = RQ_ACTIVE; - rq->rq_dev = ????; -#endif -} - -/* - * This function issues a special IDE device request - * onto the request queue. - * - * If action is ide_wait, then the rq is queued at the end of the - * request queue, and the function sleeps until it has been processed. - * This is for use when invoked from an ioctl handler. - * - * If action is ide_preempt, then the rq is queued at the head of - * the request queue, displacing the currently-being-processed - * request and this function returns immediately without waiting - * for the new rq to be completed. This is VERY DANGEROUS, and is - * intended for careful use by the ATAPI tape/cdrom driver code. - * - * If action is ide_next, then the rq is queued immediately after - * the currently-being-processed-request (if any), and the function - * returns without waiting for the new rq to be completed. As above, - * This is VERY DANGEROUS, and is intended for careful use by the - * ATAPI tape/cdrom driver code. - * - * If action is ide_end, then the rq is queued at the end of the - * request queue, and the function returns immediately without waiting - * for the new rq to be completed. This is again intended for careful - * use by the ATAPI tape/cdrom driver code. (Currently used by ide-tape.c, - * when operating in the pipelined operation mode). - */ -int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t action) -{ - unsigned long flags; - unsigned int major = HWIF(drive)->major; - struct request *cur_rq; - struct blk_dev_struct *bdev = &blk_dev[major]; - struct semaphore sem = MUTEX_LOCKED; - - if (IS_PROMISE_DRIVE && rq->buffer != NULL) - return -ENOSYS; /* special drive cmds not supported */ - rq->errors = 0; - rq->rq_status = RQ_ACTIVE; - rq->rq_dev = MKDEV(major,(drive->select.b.unit)<<PARTN_BITS); - if (action == ide_wait) - rq->sem = &sem; - unplug_device(bdev); - - save_flags(flags); - cli(); - if (action == ide_next) - HWGROUP(drive)->next_hwif = HWIF(drive); - cur_rq = bdev->current_request; - - if (cur_rq == NULL || action == ide_preempt) { - rq->next = cur_rq; - bdev->current_request = rq; - if (action == ide_preempt) - HWGROUP(drive)->rq = NULL; - } else { - if (action == ide_wait || action == ide_end) { - while (cur_rq->next != NULL) /* find end of list */ - cur_rq = cur_rq->next; - } - rq->next = cur_rq->next; - cur_rq->next = rq; - } - if (!HWGROUP(drive)->active) { - do_hwgroup_request(HWGROUP(drive)); - cli(); - } - if (action == ide_wait && rq->rq_status != RQ_INACTIVE) - down(&sem); /* wait for it to be serviced */ - restore_flags(flags); - return rq->errors ? -EIO : 0; /* return -EIO if errors */ -} - -static int ide_open(struct inode * inode, struct file * filp) -{ - ide_drive_t *drive; - unsigned long flags; - - if ((drive = get_info_ptr(inode->i_rdev)) == NULL) - return -ENXIO; - save_flags(flags); - cli(); - while (drive->busy) - sleep_on(&drive->wqueue); - drive->usage++; - restore_flags(flags); -#ifdef CONFIG_BLK_DEV_IDECD - if (drive->media == ide_cdrom) - return ide_cdrom_open (inode, filp, drive); -#endif /* CONFIG_BLK_DEV_IDECD */ -#ifdef CONFIG_BLK_DEV_IDETAPE - if (drive->media == ide_tape) - return idetape_blkdev_open (inode, filp, drive); -#endif /* CONFIG_BLK_DEV_IDETAPE */ -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - if (drive->media == ide_floppy) - return idefloppy_open (inode, filp, drive); -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ -#ifdef CONFIG_BLK_DEV_IDESCSI - if (drive->media == ide_scsi) - return idescsi_open (inode, filp, drive); -#endif /* CONFIG_BLK_DEV_IDESCSI */ - if (drive->removable && drive->usage == 1) { - byte door_lock[] = {WIN_DOORLOCK,0,0,0}; - struct request rq; - check_disk_change(inode->i_rdev); - ide_init_drive_cmd (&rq); - rq.buffer = door_lock; - /* - * Ignore the return code from door_lock, - * since the open() has already succeeded, - * and the door_lock is irrelevant at this point. - */ - (void) ide_do_drive_cmd(drive, &rq, ide_wait); - } - return 0; -} - -/* - * Releasing a block device means we sync() it, so that it can safely - * be forgotten about... - */ -static void ide_release(struct inode * inode, struct file * file) -{ - ide_drive_t *drive; - - if ((drive = get_info_ptr(inode->i_rdev)) != NULL) { - fsync_dev(inode->i_rdev); - drive->usage--; -#ifdef CONFIG_BLK_DEV_IDECD - if (drive->media == ide_cdrom) { - ide_cdrom_release (inode, file, drive); - return; - } -#endif /* CONFIG_BLK_DEV_IDECD */ -#ifdef CONFIG_BLK_DEV_IDETAPE - if (drive->media == ide_tape) { - idetape_blkdev_release (inode, file, drive); - return; - } -#endif /* CONFIG_BLK_DEV_IDETAPE */ -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - if (drive->media == ide_floppy) { - idefloppy_release (inode, file, drive); - return; - } -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ -#ifdef CONFIG_BLK_DEV_IDESCSI - if (drive->media == ide_scsi) { - idescsi_ide_release (inode, file, drive); - return; - } -#endif /* CONFIG_BLK_DEV_IDESCSI */ - if (drive->removable && !drive->usage) { - byte door_unlock[] = {WIN_DOORUNLOCK,0,0,0}; - struct request rq; - invalidate_buffers(inode->i_rdev); - ide_init_drive_cmd (&rq); - rq.buffer = door_unlock; - (void) ide_do_drive_cmd(drive, &rq, ide_wait); - } - } -} - -/* - * This routine is called to flush all partitions and partition tables - * for a changed disk, and then re-read the new partition table. - * If we are revalidating a disk because of a media change, then we - * enter with usage == 0. If we are using an ioctl, we automatically have - * usage == 1 (we need an open channel to use an ioctl :-), so this - * is our limit. - */ -static int revalidate_disk(kdev_t i_rdev) -{ - ide_drive_t *drive; - unsigned int p, major, minor; - long flags; - - if ((drive = get_info_ptr(i_rdev)) == NULL) - return -ENODEV; - - major = MAJOR(i_rdev); - minor = drive->select.b.unit << PARTN_BITS; - save_flags(flags); - cli(); - if (drive->busy || (drive->usage > 1)) { - restore_flags(flags); - return -EBUSY; - }; - drive->busy = 1; - restore_flags(flags); - - for (p = 0; p < (1<<PARTN_BITS); ++p) { - if (drive->part[p].nr_sects > 0) { - kdev_t devp = MKDEV(major, minor+p); - fsync_dev (devp); - invalidate_inodes (devp); - invalidate_buffers (devp); - set_blocksize(devp, 1024); - } - drive->part[p].start_sect = 0; - drive->part[p].nr_sects = 0; - }; - - drive->part[0].nr_sects = current_capacity(drive); - if ((drive->media != ide_disk && drive->media != ide_floppy) || !drive->part[0].nr_sects) - drive->part[0].start_sect = -1; - resetup_one_dev(HWIF(drive)->gd, drive->select.b.unit); - - drive->busy = 0; - wake_up(&drive->wqueue); - return 0; -} - -static int write_fs_long (unsigned long useraddr, long value) -{ - int err; - - if (NULL == (long *)useraddr) - return -EINVAL; - if ((err = verify_area(VERIFY_WRITE, (long *)useraddr, sizeof(long)))) - return err; - put_user((unsigned)value, (long *) useraddr); - return 0; -} - -static int ide_ioctl (struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - int err; - ide_drive_t *drive; - unsigned long flags; - struct request rq; - - if (!inode || !(inode->i_rdev)) - return -EINVAL; - if ((drive = get_info_ptr(inode->i_rdev)) == NULL) - return -ENODEV; - ide_init_drive_cmd (&rq); - switch (cmd) { - case HDIO_GETGEO: - { - struct hd_geometry *loc = (struct hd_geometry *) arg; - if (!loc || (drive->media != ide_disk && drive->media != ide_floppy)) return -EINVAL; -#ifdef MACH - loc->heads = drive->bios_head; - loc->sectors = drive->bios_sect; - loc->cylinders = drive->bios_cyl; - loc->start - = (drive->part[MINOR(inode->i_rdev)&PARTN_MASK] - .start_sect); -#else - err = verify_area(VERIFY_WRITE, loc, sizeof(*loc)); - if (err) return err; - put_user(drive->bios_head, (byte *) &loc->heads); - put_user(drive->bios_sect, (byte *) &loc->sectors); - put_user(drive->bios_cyl, (unsigned short *) &loc->cylinders); - put_user((unsigned)drive->part[MINOR(inode->i_rdev)&PARTN_MASK].start_sect, - (unsigned long *) &loc->start); -#endif - return 0; - } - case BLKFLSBUF: - if (!suser()) return -EACCES; - fsync_dev(inode->i_rdev); - invalidate_buffers(inode->i_rdev); - return 0; - - case BLKRASET: - if (!suser()) return -EACCES; - if(arg > 0xff) return -EINVAL; - read_ahead[MAJOR(inode->i_rdev)] = arg; - return 0; - - case BLKRAGET: - return write_fs_long(arg, read_ahead[MAJOR(inode->i_rdev)]); - - case BLKGETSIZE: /* Return device size */ - return write_fs_long(arg, drive->part[MINOR(inode->i_rdev)&PARTN_MASK].nr_sects); - case BLKRRPART: /* Re-read partition tables */ - if (!suser()) return -EACCES; - return revalidate_disk(inode->i_rdev); - - case HDIO_GET_KEEPSETTINGS: - return write_fs_long(arg, drive->keep_settings); - - case HDIO_GET_UNMASKINTR: - return write_fs_long(arg, drive->unmask); - - case HDIO_GET_DMA: - return write_fs_long(arg, drive->using_dma); - - case HDIO_GET_32BIT: - return write_fs_long(arg, drive->io_32bit); - - case HDIO_GET_MULTCOUNT: - return write_fs_long(arg, drive->mult_count); - - case HDIO_GET_IDENTITY: - if (!arg || (MINOR(inode->i_rdev) & PARTN_MASK)) - return -EINVAL; - if (drive->id == NULL) - return -ENOMSG; - err = verify_area(VERIFY_WRITE, (char *)arg, sizeof(*drive->id)); - if (!err) - memcpy_tofs((char *)arg, (char *)drive->id, sizeof(*drive->id)); - return err; - - case HDIO_GET_NOWERR: - return write_fs_long(arg, drive->bad_wstat == BAD_R_STAT); - - case HDIO_SET_DMA: - if (!suser()) return -EACCES; -#ifdef CONFIG_BLK_DEV_IDECD - if (drive->media == ide_cdrom) - return -EPERM; -#endif /* CONFIG_BLK_DEV_IDECD */ - if (!drive->id || !(drive->id->capability & 1) || !HWIF(drive)->dmaproc) - return -EPERM; - case HDIO_SET_KEEPSETTINGS: - case HDIO_SET_UNMASKINTR: - case HDIO_SET_NOWERR: - if (arg > 1) - return -EINVAL; - case HDIO_SET_32BIT: - if (!suser()) return -EACCES; - if ((MINOR(inode->i_rdev) & PARTN_MASK)) - return -EINVAL; - save_flags(flags); - cli(); - switch (cmd) { - case HDIO_SET_DMA: - if (!(HWIF(drive)->dmaproc)) { - restore_flags(flags); - return -EPERM; - } - drive->using_dma = arg; - break; - case HDIO_SET_KEEPSETTINGS: - drive->keep_settings = arg; - break; - case HDIO_SET_UNMASKINTR: - if (arg && drive->no_unmask) { - restore_flags(flags); - return -EPERM; - } - drive->unmask = arg; - break; - case HDIO_SET_NOWERR: - drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; - break; - case HDIO_SET_32BIT: - if (arg > (1 + (SUPPORT_VLB_SYNC<<1))) { - restore_flags(flags); - return -EINVAL; - } - if (arg && drive->no_io_32bit) { - restore_flags(flags); - return -EPERM; - } - drive->io_32bit = arg; -#ifdef CONFIG_BLK_DEV_DTC2278 - if (HWIF(drive)->chipset == ide_dtc2278) - HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg; -#endif /* CONFIG_BLK_DEV_DTC2278 */ - break; - } - restore_flags(flags); - return 0; - - case HDIO_SET_MULTCOUNT: - if (!suser()) return -EACCES; - if (MINOR(inode->i_rdev) & PARTN_MASK) - return -EINVAL; - if (drive->id && arg > drive->id->max_multsect) - return -EINVAL; - save_flags(flags); - cli(); - if (drive->special.b.set_multmode) { - restore_flags(flags); - return -EBUSY; - } - drive->mult_req = arg; - drive->special.b.set_multmode = 1; - restore_flags(flags); - (void) ide_do_drive_cmd (drive, &rq, ide_wait); - return (drive->mult_count == arg) ? 0 : -EIO; - - case HDIO_DRIVE_CMD: - { - byte args[4], *argbuf = args; - int argsize = 4; - if (!suser() || securelevel > 0) return -EACCES; - if (NULL == (void *) arg) { - err = ide_do_drive_cmd(drive, &rq, ide_wait); - } else if (!(err = verify_area(VERIFY_READ,(void *)arg, 4))) { - memcpy_fromfs(args, (void *)arg, 4); - if (args[3]) { - argsize = 4 + (SECTOR_WORDS * 4 * args[3]); - argbuf = kmalloc(argsize, GFP_KERNEL); - if (argbuf == NULL) - return -ENOMEM; - argbuf[0] = args[0]; - argbuf[1] = args[1]; - argbuf[2] = args[2]; - argbuf[3] = args[3]; - } - if (!(err = verify_area(VERIFY_WRITE,(void *)arg, argsize))) { - rq.buffer = argbuf; - err = ide_do_drive_cmd(drive, &rq, ide_wait); - memcpy_tofs((void *)arg, argbuf, argsize); - } - if (argsize > 4) - kfree(argbuf); - } - return err; - } - case HDIO_SET_PIO_MODE: - if (!suser()) return -EACCES; - if (MINOR(inode->i_rdev) & PARTN_MASK) - return -EINVAL; - if (!HWIF(drive)->tuneproc) - return -ENOSYS; - save_flags(flags); - cli(); - if (drive->special.b.set_tune) { - restore_flags(flags); - return -EBUSY; - } - drive->tune_req = (byte) arg; - drive->special.b.set_tune = 1; - restore_flags(flags); - (void) ide_do_drive_cmd (drive, &rq, ide_wait); - return 0; - - RO_IOCTLS(inode->i_rdev, arg); - - default: -#ifdef CONFIG_BLK_DEV_IDECD - if (drive->media == ide_cdrom) - return ide_cdrom_ioctl(drive, inode, file, cmd, arg); -#endif /* CONFIG_BLK_DEV_IDECD */ -#ifdef CONFIG_BLK_DEV_IDETAPE - if (drive->media == ide_tape) - return idetape_blkdev_ioctl(drive, inode, file, cmd, arg); -#endif /* CONFIG_BLK_DEV_IDETAPE */ -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - if (drive->media == ide_floppy) - return idefloppy_ioctl(drive, inode, file, cmd, arg); -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ -#ifdef CONFIG_BLK_DEV_IDESCSI - if (drive->media == ide_scsi) - return idescsi_ioctl(drive, inode, file, cmd, arg); -#endif /* CONFIG_BLK_DEV_IDESCSI */ - return -EPERM; - } -} - -static int ide_check_media_change (kdev_t i_rdev) -{ - ide_drive_t *drive; - - if ((drive = get_info_ptr(i_rdev)) == NULL) - return -ENODEV; -#ifdef CONFIG_BLK_DEV_IDECD - if (drive->media == ide_cdrom) - return ide_cdrom_check_media_change (drive); -#endif /* CONFIG_BLK_DEV_IDECD */ -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - if (drive->media == ide_floppy) - return idefloppy_media_change (drive); -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ - if (drive->removable) /* for disks */ - return 1; /* always assume it was changed */ - return 0; -} - -void ide_fixstring (byte *s, const int bytecount, const int byteswap) -{ - byte *p = s, *end = &s[bytecount & ~1]; /* bytecount must be even */ - - if (byteswap) { - /* convert from big-endian to host byte order */ - for (p = end ; p != s;) { - unsigned short *pp = (unsigned short *) (p -= 2); - *pp = ntohs(*pp); - } - } - - /* strip leading blanks */ - while (s != end && *s == ' ') - ++s; - - /* compress internal blanks and strip trailing blanks */ - while (s != end && *s) { - if (*s++ != ' ' || (s != end && *s && *s != ' ')) - *p++ = *(s-1); - } - - /* wipe out trailing garbage */ - while (p != end) - *p++ = '\0'; -} - -static inline void do_identify (ide_drive_t *drive, byte cmd) -{ - int bswap; - struct hd_driveid *id; - unsigned long capacity, check; - - id = drive->id = kmalloc (SECTOR_WORDS*4, GFP_KERNEL); - ide_input_data(drive, id, SECTOR_WORDS);/* read 512 bytes of id info */ - sti(); - -#if defined (CONFIG_SCSI_EATA_DMA) || defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA) - /* - * EATA SCSI controllers do a hardware ATA emulation: - * Ignore them if there is a driver for them available. - */ - if ((id->model[0] == 'P' && id->model[1] == 'M') - || (id->model[0] == 'S' && id->model[1] == 'K')) { - printk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model); - drive->present = 0; - return; - } -#endif - - /* - * WIN_IDENTIFY returns little-endian info, - * WIN_PIDENTIFY *usually* returns little-endian info. - */ - bswap = 1; - if (cmd == WIN_PIDENTIFY) { - if ((id->model[0] == 'N' && id->model[1] == 'E') /* NEC */ - || (id->model[0] == 'F' && id->model[1] == 'X') /* Mitsumi */ - || (id->model[0] == 'P' && id->model[1] == 'i'))/* Pioneer */ - bswap = 0; /* Vertos drives may still be weird */ - } - ide_fixstring (id->model, sizeof(id->model), bswap); - ide_fixstring (id->fw_rev, sizeof(id->fw_rev), bswap); - ide_fixstring (id->serial_no, sizeof(id->serial_no), bswap); - - if (strstr(id->model, "E X A B Y T E N E S T")) - return; - -#ifdef CONFIG_BLK_DEV_IDEATAPI - /* - * Check for an ATAPI device - */ - if (cmd == WIN_PIDENTIFY) { - byte type = (id->config >> 8) & 0x1f; - printk("%s: %s, ATAPI ", drive->name, id->model); -#ifdef CONFIG_BLK_DEV_PROMISE - if (HWIF(drive)->is_promise2) { - printk(" -- not supported on 2nd Promise port\n"); - drive->present = 0; - return; - } -#endif /* CONFIG_BLK_DEV_PROMISE */ - if (!drive->ide_scsi) switch (type) { - case 0: - if (!strstr(id->model, "oppy") && !strstr(id->model, "poyp") && !strstr(id->model, "ZIP")) - printk("cdrom or floppy?, assuming "); - if (drive->media != ide_cdrom && !strstr(id->model, "CD-ROM")) { -#ifdef CONFIG_BLK_DEV_IDEFLOPPY - printk("FLOPPY drive\n"); - drive->media = ide_floppy; - if (idefloppy_identify_device(drive, id)) - drive->present = 1; - return; -#else - printk("FLOPPY "); - break; -#endif /* CONFIG_BLK_DEV_IDEFLOPPY */ - } - /* Early cdrom models used zero */ - case 5: -#ifdef CONFIG_BLK_DEV_IDECD - printk ("CDROM drive\n"); - drive->media = ide_cdrom; - drive->present = 1; - drive->removable = 1; - return; -#else - printk ("CDROM "); - break; -#endif /* CONFIG_BLK_DEV_IDECD */ - case 1: -#ifdef CONFIG_BLK_DEV_IDETAPE - printk ("TAPE drive"); - if (idetape_identify_device (drive,id)) { - drive->media = ide_tape; - drive->present = 1; - drive->removable = 1; - if (drive->autotune != 2 && HWIF(drive)->dmaproc != NULL) { - if (!HWIF(drive)->dmaproc(ide_dma_check, drive)) - printk(", DMA"); - } - printk("\n"); - } - else { - drive->present = 0; - printk ("\nide-tape: the tape is not supported by this version of the driver\n"); - } - return; -#else - printk ("TAPE "); - break; -#endif /* CONFIG_BLK_DEV_IDETAPE */ - default: - drive->present = 0; - printk("Type %d - Unknown device\n", type); - return; - } -#ifdef CONFIG_BLK_DEV_IDESCSI - printk("drive - enabling SCSI emulation\n"); - drive->media = ide_scsi; - drive->present = 1; - idescsi_setup(drive); -#else - drive->present = 0; - printk("- not supported by this kernel\n"); -#endif /* CONFIG_BLK_DEV_IDESCSI */ - return; - } -#endif /* CONFIG_BLK_DEV_IDEATAPI */ - - /* check for removable disks (eg. SYQUEST), ignore 'WD' drives */ - if (id->config & (1<<7)) { /* removable disk ? */ - if (id->model[0] != 'W' || id->model[1] != 'D') - drive->removable = 1; - } - - /* SunDisk drives: treat as non-removable, force one unit */ - if (id->model[0] == 'S' && id->model[1] == 'u') { - drive->removable = 0; - if (drive->select.all & (1<<4)) { - drive->present = 0; - return; - } - } - - drive->media = ide_disk; - /* Extract geometry if we did not already have one for the drive */ - if (!drive->present) { - drive->present = 1; - drive->cyl = drive->bios_cyl = id->cyls; - drive->head = drive->bios_head = id->heads; - drive->sect = drive->bios_sect = id->sectors; - } - /* Handle logical geometry translation by the drive */ - if ((id->field_valid & 1) && id->cur_cyls && id->cur_heads - && (id->cur_heads <= 16) && id->cur_sectors) - { - /* - * Extract the physical drive geometry for our use. - * Note that we purposely do *not* update the bios info. - * This way, programs that use it (like fdisk) will - * still have the same logical view as the BIOS does, - * which keeps the partition table from being screwed. - * - * An exception to this is the cylinder count, - * which we reexamine later on to correct for 1024 limitations. - */ - drive->cyl = id->cur_cyls; - drive->head = id->cur_heads; - drive->sect = id->cur_sectors; - - /* check for word-swapped "capacity" field in id information */ - capacity = drive->cyl * drive->head * drive->sect; - check = (id->cur_capacity0 << 16) | id->cur_capacity1; - if (check == capacity) { /* was it swapped? */ - /* yes, bring it into little-endian order: */ - id->cur_capacity0 = (capacity >> 0) & 0xffff; - id->cur_capacity1 = (capacity >> 16) & 0xffff; - } - } - /* Use physical geometry if what we have still makes no sense */ - if ((!drive->head || drive->head > 16) && id->heads && id->heads <= 16) { - drive->cyl = id->cyls; - drive->head = id->heads; - drive->sect = id->sectors; - } - - /* calculate drive capacity, and select LBA if possible */ - capacity = current_capacity (drive); - - /* Correct the number of cyls if the bios value is too small */ - if (!drive->forced_geom && - capacity > drive->bios_cyl * drive->bios_sect * drive->bios_head) { - unsigned long cylsize; - cylsize = drive->bios_sect * drive->bios_head; - if (cylsize == 0 || capacity/cylsize > 65535) { - drive->bios_sect = 63; - drive->bios_head = 255; - cylsize = 63*255; - } - if (capacity/cylsize > 65535) - drive->bios_cyl = 65535; - else - drive->bios_cyl = capacity/cylsize; - } - - if (!strncmp(id->model, "BMI ", 4) && - strstr(id->model, " ENHANCED IDE ") && - drive->select.b.lba) - drive->no_geom = 1; - - printk ("%s: %.40s, %ldMB w/%dkB Cache, CHS=%d/%d/%d", - drive->name, id->model, current_capacity(drive)/2048L, id->buf_size/2, - drive->bios_cyl, drive->bios_head, drive->bios_sect); - - drive->mult_count = 0; - if (id->max_multsect) { - drive->mult_req = INITIAL_MULT_COUNT; - if (drive->mult_req > id->max_multsect) - drive->mult_req = id->max_multsect; - if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect)) - drive->special.b.set_multmode = 1; - } - if (drive->autotune != 2 && HWIF(drive)->dmaproc != NULL) { - if (!(HWIF(drive)->dmaproc(ide_dma_check, drive))) { - if ((id->field_valid & 4) && (id->dma_ultra & (id->dma_ultra >> 8) & 7)) - printk(", UDMA"); - else - printk(", DMA"); - } - } - printk("\n"); -} - -/* - * Delay for *at least* 50ms. As we don't know how much time is left - * until the next tick occurs, we wait an extra tick to be safe. - * This is used only during the probing/polling for drives at boot time. - */ -static void delay_50ms (void) -{ - unsigned long timer = jiffies + ((HZ + 19)/20) + 1; - while (timer > jiffies); -} - -/* - * try_to_identify() sends an ATA(PI) IDENTIFY request to a drive - * and waits for a response. It also monitors irqs while this is - * happening, in hope of automatically determining which one is - * being used by the interface. - * - * Returns: 0 device was identified - * 1 device timed-out (no response to identify request) - * 2 device aborted the command (refused to identify itself) - */ -static int try_to_identify (ide_drive_t *drive, byte cmd) -{ - int hd_status, rc; - unsigned long timeout; - unsigned long irqs_on = 0; - int irq_off; - - if (!HWIF(drive)->irq) { /* already got an IRQ? */ - probe_irq_off(probe_irq_on()); /* clear dangling irqs */ - irqs_on = probe_irq_on(); /* start monitoring irqs */ - OUT_BYTE(drive->ctl,IDE_CONTROL_REG); /* enable device irq */ - } - - delay_50ms(); /* take a deep breath */ - if ((IN_BYTE(IDE_ALTSTATUS_REG) ^ IN_BYTE(IDE_STATUS_REG)) & ~INDEX_STAT) { - printk("%s: probing with STATUS instead of ALTSTATUS\n", drive->name); - hd_status = IDE_STATUS_REG; /* ancient Seagate drives */ - } else - hd_status = IDE_ALTSTATUS_REG; /* use non-intrusive polling */ - -#if CONFIG_BLK_DEV_PROMISE - if (IS_PROMISE_DRIVE) { - if (promise_cmd(drive,PROMISE_IDENTIFY)) { - if (irqs_on) - (void) probe_irq_off(irqs_on); - return 1; - } - } else -#endif /* CONFIG_BLK_DEV_PROMISE */ - OUT_BYTE(cmd,IDE_COMMAND_REG); /* ask drive for ID */ - timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - timeout += jiffies; - do { - if (jiffies > timeout) { - if (irqs_on) - (void) probe_irq_off(irqs_on); - return 1; /* drive timed-out */ - } - delay_50ms(); /* give drive a breather */ - } while (IN_BYTE(hd_status) & BUSY_STAT); - - delay_50ms(); /* wait for IRQ and DRQ_STAT */ - if (OK_STAT(GET_STAT(),DRQ_STAT,BAD_R_STAT)) { - unsigned long flags; - save_flags(flags); - cli(); /* some systems need this */ - do_identify(drive, cmd); /* drive returned ID */ - rc = 0; /* drive responded with ID */ - (void) GET_STAT(); /* clear drive IRQ */ - restore_flags(flags); - } else - rc = 2; /* drive refused ID */ - if (!HWIF(drive)->irq) { - irq_off = probe_irq_off(irqs_on); /* get our irq number */ - if (irq_off > 0) { - HWIF(drive)->irq = irq_off; /* save it for later */ - irqs_on = probe_irq_on(); - OUT_BYTE(drive->ctl|2,IDE_CONTROL_REG); /* mask device irq */ - udelay(5); - (void) probe_irq_off(irqs_on); - (void) probe_irq_off(probe_irq_on()); /* clear self-inflicted irq */ - (void) GET_STAT(); /* clear drive IRQ */ - - } else { /* Mmmm.. multiple IRQs.. don't know which was ours */ - printk("%s: IRQ probe failed (%d)\n", drive->name, irq_off); -#ifdef CONFIG_BLK_DEV_CMD640 -#ifdef CMD640_DUMP_REGS - if (HWIF(drive)->chipset == ide_cmd640) { - printk("%s: Hmmm.. probably a driver problem.\n", drive->name); - CMD640_DUMP_REGS; - } -#endif /* CMD640_DUMP_REGS */ -#endif /* CONFIG_BLK_DEV_CMD640 */ - } - } - return rc; -} - -/* - * do_probe() has the difficult job of finding a drive if it exists, - * without getting hung up if it doesn't exist, without trampling on - * ethernet cards, and without leaving any IRQs dangling to haunt us later. - * - * If a drive is "known" to exist (from CMOS or kernel parameters), - * but does not respond right away, the probe will "hang in there" - * for the maximum wait time (about 30 seconds), otherwise it will - * exit much more quickly. - * - * Returns: 0 device was identified - * 1 device timed-out (no response to identify request) - * 2 device aborted the command (refused to identify itself) - * 3 bad status from device (possible for ATAPI drives) - * 4 probe was not attempted because failure was obvious - */ -static int do_probe (ide_drive_t *drive, byte cmd) -{ - int rc; - ide_hwif_t *hwif = HWIF(drive); - unsigned long timeout; -#ifdef CONFIG_BLK_DEV_IDEATAPI - if (drive->present) { /* avoid waiting for inappropriate probes */ - if ((drive->media != ide_disk) && (cmd == WIN_IDENTIFY)) - return 4; - } -#endif /* CONFIG_BLK_DEV_IDEATAPI */ -#ifdef DEBUG - printk("probing for %s: present=%d, media=%d, probetype=%s\n", - drive->name, drive->present, drive->media, - (cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI"); -#endif - SELECT_DRIVE(hwif,drive); - delay_50ms(); - if (IN_BYTE(IDE_SELECT_REG) != drive->select.all && !drive->present) { - OUT_BYTE(0xa0,IDE_SELECT_REG); /* exit with drive0 selected */ - delay_50ms(); /* allow BUSY_STAT to assert & clear */ - return 3; /* no i/f present: avoid killing ethernet cards */ - } - - if (OK_STAT(GET_STAT(),READY_STAT,BUSY_STAT) - || drive->present || cmd == WIN_PIDENTIFY) - { - if ((rc = try_to_identify(drive,cmd))) /* send cmd and wait */ - rc = try_to_identify(drive,cmd); /* failed: try again */ - if (rc == 1 && cmd == WIN_PIDENTIFY && drive->autotune != 2) { - printk("%s: no response (status = 0x%02x), resetting drive\n", drive->name, GET_STAT()); - delay_50ms(); - OUT_BYTE (drive->select.all, IDE_SELECT_REG); - delay_50ms(); - OUT_BYTE(WIN_SRST, IDE_COMMAND_REG); - timeout = jiffies; - while ((GET_STAT() & BUSY_STAT) && jiffies < timeout + WAIT_WORSTCASE) - delay_50ms(); - rc = try_to_identify(drive, cmd); - } - if (rc == 1) - printk("%s: no response (status = 0x%02x)\n", drive->name, GET_STAT()); - (void) GET_STAT(); /* ensure drive irq is clear */ - } else { - rc = 3; /* not present or maybe ATAPI */ - } - if (drive->select.b.unit != 0) { - OUT_BYTE(0xa0,IDE_SELECT_REG); /* exit with drive0 selected */ - delay_50ms(); - (void) GET_STAT(); /* ensure drive irq is clear */ - } - return rc; -} - -static void enable_nest (ide_drive_t *drive) -{ - unsigned long timeout; - - printk("%s: enabling %s -- ", HWIF(drive)->name, drive->id->model); - SELECT_DRIVE(HWIF(drive), drive); - delay_50ms(); - OUT_BYTE(EXABYTE_ENABLE_NEST, IDE_COMMAND_REG); - timeout = jiffies + WAIT_WORSTCASE; - do { - if (jiffies > timeout) { - printk("failed (timeout)\n"); - return; - } - delay_50ms(); - } while (GET_STAT() & BUSY_STAT); - delay_50ms(); - if (!OK_STAT(GET_STAT(), 0, BAD_STAT)) - printk("failed (status = 0x%02x)\n", GET_STAT()); - else - printk("success\n"); - if (do_probe(drive, WIN_IDENTIFY) >= 2) { /* if !(success||timed-out) */ -#ifdef CONFIG_BLK_DEV_IDEATAPI - (void) do_probe(drive, WIN_PIDENTIFY); /* look for ATAPI device */ -#endif /* CONFIG_BLK_DEV_IDEATAPI */ - } -} - -/* - * probe_for_drive() tests for existence of a given drive using do_probe(). - * - * Returns: 0 no device was found - * 1 device was found (note: drive->present might still be 0) - */ -static inline byte probe_for_drive (ide_drive_t *drive) -{ - if (drive->noprobe) /* skip probing? */ - return drive->present; - if (do_probe(drive, WIN_IDENTIFY) >= 2) { /* if !(success||timed-out) */ -#ifdef CONFIG_BLK_DEV_IDEATAPI - (void) do_probe(drive, WIN_PIDENTIFY); /* look for ATAPI device */ -#endif /* CONFIG_BLK_DEV_IDEATAPI */ - } - if (drive->id && strstr(drive->id->model, "E X A B Y T E N E S T")) - enable_nest(drive); - if (!drive->present) - return 0; /* drive not found */ - if (drive->id == NULL) { /* identification failed? */ - if (drive->media == ide_disk) { - printk ("%s: non-IDE drive, CHS=%d/%d/%d\n", - drive->name, drive->cyl, drive->head, drive->sect); - } -#ifdef CONFIG_BLK_DEV_IDECD - else if (drive->media == ide_cdrom) { - printk("%s: ATAPI cdrom (?)\n", drive->name); - } -#endif /* CONFIG_BLK_DEV_IDECD */ - else { - drive->present = 0; /* nuke it */ - } - } - return 1; /* drive was found */ -} - -/* - * We query CMOS about hard disks : it could be that we have a SCSI/ESDI/etc - * controller that is BIOS compatible with ST-506, and thus showing up in our - * BIOS table, but not register compatible, and therefore not present in CMOS. - * - * Furthermore, we will assume that our ST-506 drives <if any> are the primary - * drives in the system -- the ones reflected as drive 1 or 2. The first - * drive is stored in the high nibble of CMOS byte 0x12, the second in the low - * nibble. This will be either a 4 bit drive type or 0xf indicating use byte - * 0x19 for an 8 bit type, drive 1, 0x1a for drive 2 in CMOS. A non-zero value - * means we have an AT controller hard disk for that drive. - * - * Of course, there is no guarantee that either drive is actually on the - * "primary" IDE interface, but we don't bother trying to sort that out here. - * If a drive is not actually on the primary interface, then these parameters - * will be ignored. This results in the user having to supply the logical - * drive geometry as a boot parameter for each drive not on the primary i/f. - * - * The only "perfect" way to handle this would be to modify the setup.[cS] code - * to do BIOS calls Int13h/Fn08h and Int13h/Fn48h to get all of the drive info - * for us during initialization. I have the necessary docs -- any takers? -ml - */ -static void probe_cmos_for_drives (ide_hwif_t *hwif) -{ -#ifdef __i386__ - extern struct drive_info_struct drive_info; - byte cmos_disks, *BIOS = (byte *) &drive_info; - int unit; - -#ifdef CONFIG_BLK_DEV_PROMISE - if (hwif->is_promise2) - return; -#endif /* CONFIG_BLK_DEV_PROMISE */ - outb_p(0x12,0x70); /* specify CMOS address 0x12 */ - cmos_disks = inb_p(0x71); /* read the data from 0x12 */ - /* Extract drive geometry from CMOS+BIOS if not already setup */ - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; - if ((cmos_disks & (0xf0 >> (unit*4))) && !drive->present && !drive->nobios) { - drive->cyl = drive->bios_cyl = *(unsigned short *)BIOS; - drive->head = drive->bios_head = *(BIOS+2); - drive->sect = drive->bios_sect = *(BIOS+14); - drive->ctl = *(BIOS+8); - drive->present = 1; - } - BIOS += 16; - } -#endif -} - -/* - * This routine only knows how to look for drive units 0 and 1 - * on an interface, so any setting of MAX_DRIVES > 2 won't work here. - */ -static void probe_hwif (ide_hwif_t *hwif) -{ - unsigned int unit; - - if (hwif->noprobe) - return; - if (hwif->io_base == HD_DATA) - probe_cmos_for_drives (hwif); -#if CONFIG_BLK_DEV_PROMISE - if (!hwif->is_promise2 && - (check_region(hwif->io_base,8) || check_region(hwif->ctl_port,1))) { -#else - if (check_region(hwif->io_base,8) || check_region(hwif->ctl_port,1)) { -#endif /* CONFIG_BLK_DEV_PROMISE */ - int msgout = 0; - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; - if (drive->present) { - drive->present = 0; - printk("%s: ERROR, PORTS ALREADY IN USE\n", drive->name); - msgout = 1; - } - } - if (!msgout) - printk("%s: ports already in use, skipping probe\n", hwif->name); - } else { - unsigned long flags; - save_flags(flags); - - sti(); /* needed for jiffies and irq probing */ - /* - * Second drive should only exist if first drive was found, - * but a lot of cdrom drives are configured as single slaves. - */ - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; - (void) probe_for_drive (drive); - if (drive->present && drive->media == ide_disk) { - if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { - printk("%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", - drive->name, drive->head); - drive->present = 0; - } - } - if (drive->present && !hwif->present) { - hwif->present = 1; - request_region(hwif->io_base, 8, hwif->name); - request_region(hwif->ctl_port, 1, hwif->name); - } - } - restore_flags(flags); - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; - if (drive->present && drive->media != ide_tape) { - ide_tuneproc_t *tuneproc = HWIF(drive)->tuneproc; - if (tuneproc != NULL && drive->autotune == 1) - tuneproc(drive, 255); /* auto-tune PIO mode */ - } - } - } -} - -/* - * stridx() returns the offset of c within s, - * or -1 if c is '\0' or not found within s. - */ -static int stridx (const char *s, char c) -{ - char *i = strchr(s, c); - return (i && c) ? i - s : -1; -} - -/* - * match_parm() does parsing for ide_setup(): - * - * 1. the first char of s must be '='. - * 2. if the remainder matches one of the supplied keywords, - * the index (1 based) of the keyword is negated and returned. - * 3. if the remainder is a series of no more than max_vals numbers - * separated by commas, the numbers are saved in vals[] and a - * count of how many were saved is returned. Base10 is assumed, - * and base16 is allowed when prefixed with "0x". - * 4. otherwise, zero is returned. - */ -static int match_parm (char *s, const char *keywords[], int vals[], int max_vals) -{ - static const char *decimal = "0123456789"; - static const char *hex = "0123456789abcdef"; - int i, n; - - if (*s++ == '=') { - /* - * Try matching against the supplied keywords, - * and return -(index+1) if we match one - */ - if (keywords != NULL) { - for (i = 0; *keywords != NULL; ++i) { - if (!strcmp(s, *keywords++)) - return -(i+1); - } - } - /* - * Look for a series of no more than "max_vals" - * numeric values separated by commas, in base10, - * or base16 when prefixed with "0x". - * Return a count of how many were found. - */ - for (n = 0; (i = stridx(decimal, *s)) >= 0;) { - vals[n] = i; - while ((i = stridx(decimal, *++s)) >= 0) - vals[n] = (vals[n] * 10) + i; - if (*s == 'x' && !vals[n]) { - while ((i = stridx(hex, *++s)) >= 0) - vals[n] = (vals[n] * 0x10) + i; - } - if (++n == max_vals) - break; - if (*s == ',') - ++s; - } - if (!*s) - return n; - } - return 0; /* zero = nothing matched */ -} - -/* - * ide_setup() gets called VERY EARLY during initialization, - * to handle kernel "command line" strings beginning with "hdx=" - * or "ide". Here is the complete set currently supported: - * - * "hdx=" is recognized for all "x" from "a" to "h", such as "hdc". - * "idex=" is recognized for all "x" from "0" to "3", such as "ide1". - * - * "hdx=noprobe" : drive may be present, but do not probe for it - * "hdx=none" : drive is NOT present, ignore cmos and do not probe - * "hdx=nowerr" : ignore the WRERR_STAT bit on this drive - * "hdx=cdrom" : drive is present, and is a cdrom drive - * "hdx=cyl,head,sect" : disk drive is present, with specified geometry - * "hdx=autotune" : driver will attempt to tune interface speed - * to the fastest PIO mode supported, - * if possible for this drive only. - * Not fully supported by all chipset types, - * and quite likely to cause trouble with - * older/odd IDE drives. - * - * "idebus=xx" : inform IDE driver of VESA/PCI bus speed in Mhz, - * where "xx" is between 20 and 66 inclusive, - * used when tuning chipset PIO modes. - * For PCI bus, 25 is correct for a P75 system, - * 30 is correct for P90,P120,P180 systems, - * and 33 is used for P100,P133,P166 systems. - * If in doubt, use idebus=33 for PCI. - * As for VLB, it is safest to not specify it. - * - * "idex=noprobe" : do not attempt to access/use this interface - * "idex=base" : probe for an interface at the addr specified, - * where "base" is usually 0x1f0 or 0x170 - * and "ctl" is assumed to be "base"+0x206 - * "idex=base,ctl" : specify both base and ctl - * "idex=base,ctl,irq" : specify base, ctl, and irq number - * "idex=autotune" : driver will attempt to tune interface speed - * to the fastest PIO mode supported, - * for all drives on this interface. - * Not fully supported by all chipset types, - * and quite likely to cause trouble with - * older/odd IDE drives. - * "idex=noautotune" : driver will NOT attempt to tune interface speed - * This is the default for most chipsets, - * except the cmd640. - * "idex=serialize" : do not overlap operations on idex and ide(x^1) - * - * The following are valid ONLY on ide0, - * and the defaults for the base,ctl ports must not be altered. - * - * "ide0=dtc2278" : probe/support DTC2278 interface - * "ide0=ht6560b" : probe/support HT6560B interface - * "ide0=cmd640_vlb" : *REQUIRED* for VLB cards with the CMD640 chip - * (not for PCI -- automatically detected) - * "ide0=qd6580" : probe/support qd6580 interface - * "ide0=ali14xx" : probe/support ali14xx chipsets (ALI M1439, M1443, M1445) - * "ide0=umc8672" : probe/support umc8672 chipsets - */ -void ide_setup (char *s) -{ - int i, vals[3]; - ide_hwif_t *hwif; - ide_drive_t *drive; - unsigned int hw, unit; - const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1); - const char max_hwif = '0' + (MAX_HWIFS - 1); - - printk("ide_setup: %s", s); - init_ide_data (); - - /* - * Look for drive options: "hdx=" - */ - if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { - const char *hd_words[] = {"none", "noprobe", "nowerr", "cdrom", - "serialize", "autotune", "noautotune", - "slow", "ide-scsi", NULL}; - unit = s[2] - 'a'; - hw = unit / MAX_DRIVES; - unit = unit % MAX_DRIVES; - hwif = &ide_hwifs[hw]; - drive = &hwif->drives[unit]; - switch (match_parm(&s[3], hd_words, vals, 3)) { - case -1: /* "none" */ - drive->nobios = 1; /* drop into "noprobe" */ - case -2: /* "noprobe" */ - drive->noprobe = 1; - goto done; - case -3: /* "nowerr" */ - drive->bad_wstat = BAD_R_STAT; - hwif->noprobe = 0; - goto done; - case -4: /* "cdrom" */ - drive->present = 1; - drive->media = ide_cdrom; - hwif->noprobe = 0; - goto done; - case -5: /* "serialize" */ - printk(" -- USE \"ide%d=serialize\" INSTEAD", hw); - goto do_serialize; - case -6: /* "autotune" */ - drive->autotune = 1; - goto done; - case -7: /* "noautotune" */ - drive->autotune = 2; - goto done; - case -8: /* "slow" */ - drive->slow = 1; - goto done; - case -9: /* "ide-scsi" */ - drive->ide_scsi = 1; - goto done; - case 3: /* cyl,head,sect */ - drive->media = ide_disk; - drive->cyl = drive->bios_cyl = vals[0]; - drive->head = drive->bios_head = vals[1]; - drive->sect = drive->bios_sect = vals[2]; - drive->present = 1; - drive->forced_geom = 1; - hwif->noprobe = 0; - goto done; - default: - goto bad_option; - } - } - - if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e') - goto bad_option; - /* - * Look for bus speed option: "idebus=" - */ - if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') { - if (match_parm(&s[6], NULL, vals, 1) != 1) - goto bad_option; - if (vals[0] >= 20 && vals[0] <= 66) - idebus_parameter = vals[0]; - else - printk(" -- BAD BUS SPEED! Expected value from 20 to 66"); - goto done; - } - /* - * Look for interface options: "idex=" - */ - if (s[3] >= '0' && s[3] <= max_hwif) { - /* - * Be VERY CAREFUL changing this: note hardcoded indexes below - */ - const char *ide_words[] = {"noprobe", "serialize", "autotune", "noautotune", - "qd6580", "ht6560b", "cmd640_vlb", "dtc2278", "umc8672", "ali14xx", "dc4030", NULL}; - hw = s[3] - '0'; - hwif = &ide_hwifs[hw]; - i = match_parm(&s[4], ide_words, vals, 3); - - /* - * Cryptic check to ensure chipset not already set for hwif: - */ - if (i > 0 || i <= -5) { - if (hwif->chipset != ide_unknown) - goto bad_option; - if (i <= -5) { - if (ide_hwifs[1].chipset != ide_unknown) - goto bad_option; - /* - * Interface keywords work only for ide0: - */ - if (hw != 0) - goto bad_hwif; - } - } - - switch (i) { -#ifdef CONFIG_BLK_DEV_PROMISE - case -11: /* "dc4030" */ - { - setup_dc4030(hwif); - goto done; - } -#endif /* CONFIG_BLK_DEV_PROMISE */ -#ifdef CONFIG_BLK_DEV_ALI14XX - case -10: /* "ali14xx" */ - { - extern void init_ali14xx (void); - init_ali14xx(); - goto done; - } -#endif /* CONFIG_BLK_DEV_ALI14XX */ -#ifdef CONFIG_BLK_DEV_UMC8672 - case -9: /* "umc8672" */ - { - extern void init_umc8672 (void); - init_umc8672(); - goto done; - } -#endif /* CONFIG_BLK_DEV_UMC8672 */ -#ifdef CONFIG_BLK_DEV_DTC2278 - case -8: /* "dtc2278" */ - { - extern void init_dtc2278 (void); - init_dtc2278(); - goto done; - } -#endif /* CONFIG_BLK_DEV_DTC2278 */ -#ifdef CONFIG_BLK_DEV_CMD640 - case -7: /* "cmd640_vlb" */ - { - extern int cmd640_vlb; /* flag for cmd640.c */ - cmd640_vlb = 1; - goto done; - } -#endif /* CONFIG_BLK_DEV_CMD640 */ -#ifdef CONFIG_BLK_DEV_HT6560B - case -6: /* "ht6560b" */ - { - extern void init_ht6560b (void); - init_ht6560b(); - goto done; - } -#endif /* CONFIG_BLK_DEV_HT6560B */ -#if CONFIG_BLK_DEV_QD6580 - case -5: /* "qd6580" (has secondary i/f) */ - { - extern void init_qd6580 (void); - init_qd6580(); - goto done; - } -#endif /* CONFIG_BLK_DEV_QD6580 */ - case -4: /* "noautotune" */ - hwif->drives[0].autotune = 2; - hwif->drives[1].autotune = 2; - goto done; - case -3: /* "autotune" */ - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - goto done; - case -2: /* "serialize" */ - do_serialize: - ide_hwifs[hw].serialized = 1; /* serialize */ - ide_hwifs[hw^1].serialized = 1; /* with mate */ - goto done; - - case -1: /* "noprobe" */ - hwif->noprobe = 1; - goto done; - - case 1: /* base */ - vals[1] = vals[0] + 0x206; /* default ctl */ - case 2: /* base,ctl */ - vals[2] = 0; /* default irq = probe for it */ - case 3: /* base,ctl,irq */ - hwif->io_base = vals[0]; - hwif->ctl_port = vals[1]; - hwif->irq = vals[2]; - hwif->noprobe = 0; - hwif->chipset = ide_generic; - goto done; - - case 0: goto bad_option; - default: - printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n"); - return; - } - } -bad_option: - printk(" -- BAD OPTION\n"); - return; -bad_hwif: - printk("-- NOT SUPPORTED ON ide%d", hw); -done: - printk("\n"); -} - -/* - * This routine is called from the partition-table code in genhd.c - * to "convert" a drive to a logical geometry with fewer than 1024 cyls. - * - * The second parameter, "xparm", determines exactly how the translation - * will be handled: - * 0 = convert to CHS with fewer than 1024 cyls - * using the same method as Ontrack DiskManager. - * 1 = same as "0", plus offset everything by 63 sectors. - * -1 = similar to "0", plus redirect sector 0 to sector 1. - * >1 = convert to a CHS geometry with "xparm" heads. - * - * Returns 0 if the translation was not possible, if the device was not - * an IDE disk drive, or if a geometry was "forced" on the commandline. - * Returns 1 if the geometry translation was successful. - */ -int ide_xlate_1024 (kdev_t i_rdev, int xparm, const char *msg) -{ - ide_drive_t *drive; - static const byte head_vals[] = {4, 8, 16, 32, 64, 128, 255, 0}; - const byte *heads = head_vals; - unsigned long tracks; - - if ((drive = get_info_ptr(i_rdev)) == NULL || drive->forced_geom) - return 0; - - if (xparm > 1 && xparm <= drive->bios_head && drive->bios_sect == 63) - return 0; /* we already have a translation */ - - printk("%s ", msg); - - if (drive->id) { - drive->cyl = drive->id->cyls; - drive->head = drive->id->heads; - drive->sect = drive->id->sectors; - } - drive->bios_cyl = drive->cyl; - drive->bios_head = drive->head; - drive->bios_sect = drive->sect; - drive->special.b.set_geometry = 1; - - tracks = drive->bios_cyl * drive->bios_head * drive->bios_sect / 63; - drive->bios_sect = 63; - if (xparm > 1) { - drive->bios_head = xparm; - drive->bios_cyl = tracks / drive->bios_head; - } else { - while (drive->bios_cyl >= 1024) { - drive->bios_head = *heads; - drive->bios_cyl = tracks / drive->bios_head; - if (0 == *++heads) - break; - } -#if FAKE_FDISK_FOR_EZDRIVE - if (xparm == -1) { - drive->remap_0_to_1 = 1; - msg = "0->1"; - } else -#endif /* FAKE_FDISK_FOR_EZDRIVE */ - if (xparm == 1) { - drive->sect0 = 63; - drive->bios_cyl = (tracks - 1) / drive->bios_head; - msg = "+63"; - } - printk("[remap %s] ", msg); - } - drive->part[0].nr_sects = current_capacity(drive); - printk("[%d/%d/%d]", drive->bios_cyl, drive->bios_head, drive->bios_sect); - return 1; -} - -#if MAX_HWIFS > 1 -/* - * save_match() is used to simplify logic in init_irq() below. - * - * A loophole here is that we may not know about a particular - * hwif's irq until after that hwif is actually probed/initialized.. - * This could be a problem for the case where an hwif is on a - * dual interface that requires serialization (eg. cmd640) and another - * hwif using one of the same irqs is initialized beforehand. - * - * This routine detects and reports such situations, but does not fix them. - */ -static void save_match (ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match) -{ - ide_hwif_t *m = *match; - - if (m && m->hwgroup && m->hwgroup != new->hwgroup) { - if (!new->hwgroup) - return; - printk("%s: potential irq problem with %s and %s\n", hwif->name, new->name, m->name); - } - if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */ - *match = new; -} -#endif /* MAX_HWIFS > 1 */ - -/* - * This routine sets up the irq for an ide interface, and creates a new - * hwgroup for the irq/hwif if none was previously assigned. - * - * Much of the code is for correctly detecting/handling irq sharing - * and irq serialization situations. This is somewhat complex because - * it handles static as well as dynamic (PCMCIA) IDE interfaces. - * - * The SA_INTERRUPT in sa_flags means ide_intr() is always entered with - * interrupts completely disabled. This can be bad for interrupt latency, - * but anything else has led to problems on some machines. We re-enable - * interrupts as much as we can safely do in most places. - */ -static int init_irq (ide_hwif_t *hwif) -{ - unsigned long flags; -#if MAX_HWIFS > 1 - unsigned int index; -#endif /* MAX_HWIFS > 1 */ - ide_hwgroup_t *hwgroup; - ide_hwif_t *match = NULL; - - save_flags(flags); - cli(); - - hwif->hwgroup = NULL; -#if MAX_HWIFS > 1 - /* - * Group up with any other hwifs that share our irq(s). - */ - for (index = 0; index < MAX_HWIFS; index++) { - ide_hwif_t *h = &ide_hwifs[index]; - if (h->hwgroup) { /* scan only initialized hwif's */ - if (hwif->irq == h->irq) { - hwif->sharing_irq = h->sharing_irq = 1; - save_match(hwif, h, &match); - } - if (hwif->serialized) { - ide_hwif_t *mate = &ide_hwifs[hwif->index^1]; - if (index == mate->index || h->irq == mate->irq) - save_match(hwif, h, &match); - } - if (h->serialized) { - ide_hwif_t *mate = &ide_hwifs[h->index^1]; - if (hwif->irq == mate->irq) - save_match(hwif, h, &match); - } - } - } -#endif /* MAX_HWIFS > 1 */ - /* - * If we are still without a hwgroup, then form a new one - */ - if (match) { - hwgroup = match->hwgroup; - } else { - hwgroup = kmalloc(sizeof(ide_hwgroup_t), GFP_KERNEL); - hwgroup->hwif = hwgroup->next_hwif = hwif->next = hwif; - hwgroup->rq = NULL; - hwgroup->handler = NULL; - if (hwif->drives[0].present) - hwgroup->drive = &hwif->drives[0]; - else - hwgroup->drive = &hwif->drives[1]; - hwgroup->poll_timeout = 0; - hwgroup->active = 0; - init_timer(&hwgroup->timer); - hwgroup->timer.function = &timer_expiry; - hwgroup->timer.data = (unsigned long) hwgroup; - } - - /* - * Allocate the irq, if not already obtained for another hwif - */ - if (!match || match->irq != hwif->irq) { - if (request_irq(hwif->irq, ide_intr, SA_INTERRUPT, hwif->name, hwgroup)) { - if (!match) - kfree(hwgroup); - restore_flags(flags); - return 1; - } - } - - /* - * Everything is okay, so link us into the hwgroup - */ - hwif->hwgroup = hwgroup; - hwif->next = hwgroup->hwif->next; - hwgroup->hwif->next = hwif; - - restore_flags(flags); /* safe now that hwif->hwgroup is set up */ - - printk("%s at 0x%03x-0x%03x,0x%03x on irq %d", hwif->name, - hwif->io_base, hwif->io_base+7, hwif->ctl_port, hwif->irq); - if (match) - printk(" (%sed with %s)", hwif->sharing_irq ? "shar" : "serializ", match->name); - printk("\n"); - return 0; -} - -static struct file_operations ide_fops = { - NULL, /* lseek - default */ - block_read, /* read - general block-dev read */ - block_write, /* write - general block-dev write */ - NULL, /* readdir - bad */ - NULL, /* select */ - ide_ioctl, /* ioctl */ - NULL, /* mmap */ - ide_open, /* open */ - ide_release, /* release */ - block_fsync /* fsync */ - ,NULL, /* fasync */ - ide_check_media_change, /* check_media_change */ - revalidate_disk /* revalidate */ -}; - -#ifdef CONFIG_PCI -#if defined(CONFIG_BLK_DEV_RZ1000) || defined(CONFIG_BLK_DEV_TRITON) - -typedef void (ide_pci_init_proc_t)(byte, byte); - -/* - * ide_probe_pci() scans PCI for a specific vendor/device function, - * and invokes the supplied init routine for each instance detected. - */ -static void ide_probe_pci (unsigned short vendor, unsigned short device, ide_pci_init_proc_t *init, int func_adj) -{ - unsigned long flags; - unsigned index; - byte fn, bus; - - save_flags(flags); - cli(); - for (index = 0; !pcibios_find_device (vendor, device, index, &bus, &fn); ++index) { - init (bus, fn + func_adj); - } - restore_flags(flags); -} - -#endif /* defined(CONFIG_BLK_DEV_RZ1000) || defined(CONFIG_BLK_DEV_TRITON) */ - -static void ide_probe_promise_20246(void) -{ - byte fn, bus; - unsigned short io[6], count = 0; - unsigned int reg, tmp, i; - ide_hwif_t *hwif; - - memset(io, 0, 6 * sizeof(unsigned short)); - if (pcibios_find_device(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20246, 0, &bus, &fn)) - return; - printk("ide: Promise Technology IDE Ultra-DMA 33 on PCI bus %d function %d\n", bus, fn); - for (reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg += 4) { - pcibios_read_config_dword(bus, fn, reg, &tmp); - if (tmp & PCI_BASE_ADDRESS_SPACE_IO) - io[count++] = tmp & PCI_BASE_ADDRESS_IO_MASK; - } - for (i = 2; i < 4; i++) { - hwif = ide_hwifs + i; - if (hwif->chipset == ide_generic) { - printk("ide%d: overridden with command line parameter\n", i); - return; - } - tmp = (i - 2) * 2; - if (!io[tmp] || !io[tmp + 1]) { - printk("ide%d: invalid port address %x, %x -- aborting\n", i, io[tmp], io[tmp + 1]); - return; - } - hwif->io_base = io[tmp]; - hwif->ctl_port = io[tmp + 1] + 2; - hwif->noprobe = 0; - } -#ifdef CONFIG_BLK_DEV_TRITON - ide_init_promise (bus, fn, &ide_hwifs[2], &ide_hwifs[3], io[4]); -#endif /* CONFIG_BLK_DEV_TRITON */ -} - -#endif /* CONFIG_PCI */ - -/* - * ide_init_pci() finds/initializes "known" PCI IDE interfaces - * - * This routine should ideally be using pcibios_find_class() to find - * all IDE interfaces, but that function causes some systems to "go weird". - */ -static void probe_for_hwifs (void) -{ -#ifdef CONFIG_PCI - /* - * Find/initialize PCI IDE interfaces - */ - if (pcibios_present()) { -#ifdef CONFIG_BLK_DEV_RZ1000 - ide_pci_init_proc_t init_rz1000; - ide_probe_pci (PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000, &init_rz1000, 0); - ide_probe_pci (PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001, &init_rz1000, 0); -#endif /* CONFIG_BLK_DEV_RZ1000 */ -#ifdef CONFIG_BLK_DEV_TRITON - /* - * Apparently the BIOS32 services on Intel motherboards are - * buggy and won't find the PCI_DEVICE_ID_INTEL_82371_1 for us. - * So instead, we search for PCI_DEVICE_ID_INTEL_82371_0, - * and then add 1. - */ - ide_probe_pci (PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371_0, &ide_init_triton, 1); - ide_probe_pci (PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, &ide_init_triton, 0); - ide_probe_pci (PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, &ide_init_triton, 0); -#endif /* CONFIG_BLK_DEV_TRITON */ - ide_probe_promise_20246(); - } -#endif /* CONFIG_PCI */ -#ifdef CONFIG_BLK_DEV_CMD640 - { - extern void ide_probe_for_cmd640x (void); - ide_probe_for_cmd640x(); - } -#endif -#ifdef CONFIG_BLK_DEV_PROMISE - init_dc4030(); -#endif -} - -static int hwif_init (int h) -{ - ide_hwif_t *hwif = &ide_hwifs[h]; - void (*rfn)(void); - - if (!hwif->present) - return 0; - if (!hwif->irq) { - if (!(hwif->irq = default_irqs[h])) { - printk("%s: DISABLED, NO IRQ\n", hwif->name); - return (hwif->present = 0); - } - } -#ifdef CONFIG_BLK_DEV_HD - if (hwif->irq == HD_IRQ && hwif->io_base != HD_DATA) { - printk("%s: CANNOT SHARE IRQ WITH OLD HARDDISK DRIVER (hd.c)\n", hwif->name); - return (hwif->present = 0); - } -#endif /* CONFIG_BLK_DEV_HD */ - - hwif->present = 0; /* we set it back to 1 if all is ok below */ - switch (hwif->major) { - case IDE0_MAJOR: rfn = &do_ide0_request; break; -#if MAX_HWIFS > 1 - case IDE1_MAJOR: rfn = &do_ide1_request; break; -#endif -#if MAX_HWIFS > 2 - case IDE2_MAJOR: rfn = &do_ide2_request; break; -#endif -#if MAX_HWIFS > 3 - case IDE3_MAJOR: rfn = &do_ide3_request; break; -#endif - default: - printk("%s: request_fn NOT DEFINED\n", hwif->name); - return (hwif->present = 0); - } - if (register_blkdev (hwif->major, hwif->name, &ide_fops)) { - printk("%s: UNABLE TO GET MAJOR NUMBER %d\n", hwif->name, hwif->major); - } else if (init_irq (hwif)) { - printk("%s: UNABLE TO GET IRQ %d\n", hwif->name, hwif->irq); - (void) unregister_blkdev (hwif->major, hwif->name); - } else { - init_gendisk(hwif); - blk_dev[hwif->major].request_fn = rfn; - read_ahead[hwif->major] = 8; /* (4kB) */ - hwif->present = 1; /* success */ - } - return hwif->present; -} - -/* - * This is gets invoked once during initialization, to set *everything* up - */ -int ide_init (void) -{ - int index; - - init_ide_data (); - /* - * Probe for special "known" interface chipsets - */ - probe_for_hwifs (); - - /* - * Probe for drives in the usual way.. CMOS/BIOS, then poke at ports - */ - for (index = 0; index < MAX_HWIFS; ++index) - probe_hwif (&ide_hwifs[index]); - for (index = 0; index < MAX_HWIFS; ++index) - hwif_init (index); - -#ifdef CONFIG_BLK_DEV_IDETAPE - idetape_register_chrdev(); /* Register character device interface to the ide tape */ -#endif /* CONFIG_BLK_DEV_IDETAPE */ - - return 0; -} - -#ifdef CONFIG_BLK_DEV_IDE_PCMCIA -int ide_register(int io_base, int ctl_port, int irq) -{ - int index, i, rc = -1; - ide_hwif_t *hwif; - ide_drive_t *drive; - unsigned long flags; - - save_flags(flags); - cli(); - for (index = 0; index < MAX_HWIFS; ++index) { - hwif = &ide_hwifs[index]; - if (hwif->present) { - if (hwif->io_base == io_base || hwif->ctl_port == ctl_port) - break; /* this ide port already exists */ - } else { - hwif->io_base = io_base; - hwif->ctl_port = ctl_port; - hwif->irq = irq; - hwif->noprobe = 0; - probe_hwif(hwif); - if (!hwif_init(index)) - break; - for (i = 0; i < hwif->gd->nr_real; i++) { - drive = &hwif->drives[i]; - revalidate_disk(MKDEV(hwif->major, i<<PARTN_BITS)); -#ifdef CONFIG_BLK_DEV_IDECD - if (drive->present && drive->media == ide_cdrom) - ide_cdrom_setup(drive); -#endif /* CONFIG_BLK_DEV_IDECD */ - } - rc = index; - break; - } - } - restore_flags(flags); - return rc; -} - -void ide_unregister (unsigned int index) -{ - struct gendisk *gd, **gdp; - ide_hwif_t *hwif, *g; - ide_hwgroup_t *hwgroup; - int irq_count = 0; - unsigned long flags; - - if (index >= MAX_HWIFS) - return; - save_flags(flags); - cli(); - hwif = &ide_hwifs[index]; - if (!hwif->present || hwif->drives[0].busy || hwif->drives[1].busy) { - restore_flags(flags); - return; - } - hwif->present = 0; - hwgroup = hwif->hwgroup; - - /* - * free the irq if we were the only hwif using it - */ - g = hwgroup->hwif; - do { - if (g->irq == hwif->irq) - ++irq_count; - g = g->next; - } while (g != hwgroup->hwif); - if (irq_count == 1) - free_irq(hwif->irq, hwgroup); - - /* - * Note that we only release the standard ports, - * and do not even try to handle any extra ports - * allocated for weird IDE interface chipsets. - */ - release_region(hwif->io_base, 8); - release_region(hwif->ctl_port, 1); - - /* - * Remove us from the hwgroup, and free - * the hwgroup if we were the only member - */ - while (hwgroup->hwif->next != hwif) - hwgroup->hwif = hwgroup->hwif->next; - hwgroup->hwif->next = hwif->next; - if (hwgroup->hwif == hwif) - hwgroup->hwif = hwif->next; - if (hwgroup->next_hwif == hwif) - hwgroup->next_hwif = hwif->next; - if (hwgroup->hwif == hwif) - kfree(hwgroup); - - /* - * Remove us from the kernel's knowledge - */ - unregister_blkdev(hwif->major, hwif->name); - kfree(blksize_size[hwif->major]); - blk_dev[hwif->major].request_fn = NULL; - blksize_size[hwif->major] = NULL; - for (gdp = &gendisk_head; *gdp; gdp = &((*gdp)->next)) - if (*gdp == hwif->gd) - break; - if (*gdp == NULL) - printk("gd not in disk chain!\n"); - else { - gd = *gdp; *gdp = gd->next; - kfree(gd->sizes); - kfree(gd->part); - kfree(gd); - } - init_hwif_data (index); /* restore hwif data to pristine status */ - restore_flags(flags); -} -#endif /* CONFIG_BLK_DEV_IDE_PCMCIA */ |