2006-02-20 Thomas Schwinge <tschwinge@gnu.org>

Remove unused and unsupported code.  Consult the file
	`DEVELOPMENT' for details.  Partly based on suggestions by
	Gianluca Guida <glguida@gmail.com>.

	* i386/pc/NOTES: Remove file.
	* i386/pc/debug.h: Likewise.
	* i386/pc/exit.c: Likewise.
	* i386/pc/gdt.h: Likewise.
	* i386/pc/gdt_sels.h: Likewise.
	* i386/pc/i16/i16_a20.c: Likewise.
	* i386/pc/i16/i16_a20.h: Likewise.
	* i386/pc/i16/i16_bios.h: Likewise.
	* i386/pc/i16/i16_exit.c: Likewise.
	* i386/pc/i16/i16_ext_mem.c: Likewise.
	* i386/pc/i16/i16_init.c: Likewise.
	* i386/pc/i16/i16_main.c: Likewise.
	* i386/pc/i16/i16_pic.c: Likewise.
	* i386/pc/i16/i16_putchar.c: Likewise.
	* i386/pc/i16/i16_raw.c: Likewise.
	* i386/pc/i16/i16_raw_test_a20.S: Likewise.
	* i386/pc/i16/i16_real_int.S: Likewise.
	* i386/pc/i16/i16_switch.h: Likewise.
	* i386/pc/i16/phys_mem_collect.c: Likewise.
	* i386/pc/i16/phys_mem_sources.h: Likewise.
	* i386/pc/i16/raw_exit.c: Likewise.
	* i386/pc/i16/raw_real_int.c: Likewise.
	* i386/pc/ipl.h: Likewise.
	* i386/pc/irq.h: Likewise.
	* i386/pc/irq_list.h: Likewise.
	* i386/pc/pc_asm.sym: Likewise.
	* i386/pc/phys_mem.h: Likewise.
	* i386/pc/phys_mem_add.c: Likewise.
	* i386/pc/pic.c: Likewise.
	* i386/pc/pic.h: Likewise.
	* i386/pc/putchar.c: Likewise.
	* i386/pc/real.h: Likewise.
	* i386/pc/real_tss.c: Likewise.
	* i386/pc/real_tss.h: Likewise.
	* i386/pc/real_tss_def.S: Likewise.
	* i386/pc/rv86/config.h: Likewise.
	* i386/pc/rv86/gdt_sels.h: Likewise.
	* i386/pc/rv86/idt_irq_init.c: Likewise.
	* i386/pc/rv86/rv86_real_int.c: Likewise.
	* i386/pc/rv86/rv86_real_int_asm.S: Likewise.
	* i386/pc/rv86/rv86_reflect_irq.S: Likewise.
	* i386/pc/rv86/rv86_trap_handler.S: Likewise.
	* i386/pc/rv86/trap_handler.S: Likewise.

43 files changed, 0 insertions, 3371 deletions

diff --git a/i386/pc/NOTES b/i386/pc/NOTES
deleted file mode 100644
index d165aa4..0000000
--- a/i386/pc/NOTES
+++ /dev/null
@@ -1,34 +0,0 @@
-
-
-i16_raw.c:
-	Provides a default implementation
-	of real/pmode switching code.
-	Assumes that, as far as it's concerned,
-	low linear address always map to physical addresses.
-	(The low linear mappings can be changed,
-	but must be changed back before switching back to real mode.)
-
-	Provides:
-		i16_raw_switch_to_pmode()
-		i16_raw_switch_to_real_mode()
-
-		i16_raw_start()
-			Called in real mode.
-			Initializes the pmode switching system,
-			switches to pmode for the first time,
-			and calls the 32-bit function raw_start().
-
-	Depends on:
-
-		paging.h:
-			raw_paging_enable()
-			raw_paging_disable()
-			raw_paging_init()
-
-		a20.h:
-			i16_enable_a20()
-			i16_disable_a20()
-
-		real.h:
-			real_cs
-
diff --git a/i386/pc/debug.h b/i386/pc/debug.h
deleted file mode 100644
index 6265082..0000000
--- a/i386/pc/debug.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-#ifndef _KUKM_I386_PC_DEBUG_H_
-#define _KUKM_I386_PC_DEBUG_H_
-
-#ifdef ASSEMBLER
-#ifdef DEBUG
-
-
-/* Poke a character directly onto the VGA text display,
-   as a very quick, mostly-reliable status indicator.
-   Assumes ss is a kernel data segment register.  */
-#define POKE_STATUS(char,scratch)		\
-	ss/*XXX gas bug */			;\
-	movl	%ss:_phys_mem_va,scratch	;\
-	addl	$0xb8000+80*2*13+40*2,scratch	;\
-	movb	char,%ss:(scratch)		;\
-	movb	$0xf0,%ss:1(scratch)
-
-
-#else !DEBUG
-
-#define POKE_STATUS(char,scratch)
-
-#endif !DEBUG
-#else !ASSEMBLER
-#ifdef DEBUG
-
-#include <mach/machine/vm_types.h>
-
-
-#define POKE_STATUS(string)						\
-	({	unsigned char *s = (string);				\
-		extern vm_offset_t phys_mem_va;				\
-		short *d = (short*)(phys_mem_va+0xb8000+80*2*13+40*2);	\
-		while (*s) { (*d++) = 0x3000 | (*s++); }		\
-		*d = ' ';						\
-	})
-
-
-#else !DEBUG
-
-#define POKE_STATUS(char)
-
-#endif !DEBUG
-#endif !ASSEMBLER
-
-
-#include_next "debug.h"
-
-#endif _KUKM_I386_PC_DEBUG_H_
diff --git a/i386/pc/exit.c b/i386/pc/exit.c
deleted file mode 100644
index 59c9383..0000000
--- a/i386/pc/exit.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include "real.h"
-
-void _exit(int rc)
-{
-	about_to_die(rc);
-
-	(*real_exit)(rc);
-}
-
diff --git a/i386/pc/gdt.h b/i386/pc/gdt.h
deleted file mode 100644
index 8dae857..0000000
--- a/i386/pc/gdt.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include_next "gdt.h"
-
-/* If we have a REAL_TSS, use that as our DEFAULT_TSS if necessary.
-   (The DEFAULT_TSS gets loaded by cpu_tables_load() upon switching to pmode.)  */
-#if defined(ENABLE_REAL_TSS) && !defined(DEFAULT_TSS)
-#define DEFAULT_TSS	REAL_TSS
-#define DEFAULT_TSS_IDX	REAL_TSS_IDX
-#endif
-
diff --git a/i386/pc/gdt_sels.h b/i386/pc/gdt_sels.h
deleted file mode 100644
index 18e0907..0000000
--- a/i386/pc/gdt_sels.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include_next "gdt_sels.h"
-
-#ifdef ENABLE_REAL_TSS
-
-/* This is a special TSS with a full IO bitmap
-   that allows access to all I/O ports in v86 mode.
-   It's used for making calls to the real-mode BIOS (or DOS).  */
-gdt_sel(REAL_TSS)
-
-#endif
-
diff --git a/i386/pc/i16/i16_a20.c b/i386/pc/i16/i16_a20.c
deleted file mode 100644
index 5e91f86..0000000
--- a/i386/pc/i16/i16_a20.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-
-#include <mach/machine/pio.h>
-#include <mach/machine/code16.h>
-
-#include "i16_a20.h"
-
-
-/* Keyboard stuff for turning on the A20 address line (gak!).  */
-#define K_RDWR 		0x60		/* keyboard data & cmds (read/write) */
-#define K_STATUS 	0x64		/* keyboard status (read-only) */
-#define K_CMD	 	0x64		/* keybd ctlr command (write-only) */
-
-#define K_OBUF_FUL 	0x01		/* output buffer full */
-#define K_IBUF_FUL 	0x02		/* input buffer full */
-
-#define KC_CMD_WIN	0xd0		/* read  output port */
-#define KC_CMD_WOUT	0xd1		/* write output port */
-
-#define KB_ENABLE_A20	0xdf	/* Linux and my BIOS uses this,
-				   and I trust them more than Mach 3.0,
-				   but I'd like to know what the difference is
-				   and if it matters.  */
-			/*0x9f*/	/* enable A20,
-					   enable output buffer full interrupt
-					   enable data line
-					   disable clock line */
-#define KB_DISABLE_A20	0xdd
-
-
-CODE16
-
-
-/*
-   This routine ensures that the keyboard command queue is empty
-   (after emptying the output buffers)
-
-   No timeout is used - if this hangs there is something wrong with
-   the machine, and we probably couldn't proceed anyway.
-   XXX should at least die properly
-*/
-static void i16_empty_8042(void)
-{
-	int status;
-
-retry:
-	i16_nanodelay(1000);
-	status = i16_inb(K_STATUS);
-
-	if (status & K_OBUF_FUL)
-	{
-		i16_nanodelay(1000);
-		i16_inb(K_RDWR);
-		goto retry;
-	}
-
-	if (status & K_IBUF_FUL)
-		goto retry;
-}
-
-int i16_raw_test_a20(void);
-
-/* Enable the A20 address line.  */
-void i16_raw_enable_a20(void)
-{
-	int v;
-
-	/* XXX try int 15h function 24h */
-
-	if (i16_raw_test_a20())
-		return;
-
-	/* PS/2 */
-	v = i16_inb(0x92);
-	i16_nanodelay(1000);
-	i16_outb(0x92,v | 2);
-
-	if (i16_raw_test_a20())
-		return;
-
-	/* AT */
-	i16_empty_8042();
-	i16_outb(K_CMD, KC_CMD_WOUT);
-	i16_empty_8042();
-	i16_outb(K_RDWR, KB_ENABLE_A20);
-	i16_empty_8042();
-
-	/* Wait until the a20 line gets enabled.  */
-	while (!i16_raw_test_a20());
-}
-
-/* Disable the A20 address line.  */
-void i16_raw_disable_a20(void)
-{
-	int v;
-
-	if (!i16_raw_test_a20())
-		return;
-
-	/* PS/2 */
-	v = i16_inb(0x92);
-	i16_nanodelay(1000);
-	i16_outb(0x92, v & ~2);
-
-	if (!i16_raw_test_a20())
-		return;
-
-	/* AT */
-	i16_empty_8042();
-	i16_outb(K_CMD, KC_CMD_WOUT);
-	i16_empty_8042();
-	i16_outb(K_RDWR, KB_DISABLE_A20);
-	i16_empty_8042();
-
-	/* Wait until the a20 line gets disabled.  */
-	while (i16_raw_test_a20());
-}
-
-
-void (*i16_enable_a20)(void) = i16_raw_enable_a20;
-void (*i16_disable_a20)(void) = i16_raw_disable_a20;
-
diff --git a/i386/pc/i16/i16_a20.h b/i386/pc/i16/i16_a20.h
deleted file mode 100644
index afe124b..0000000
--- a/i386/pc/i16/i16_a20.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-#ifndef _I386_PC_A20_H_
-#define _I386_PC_A20_H_
-
-/* By default these point to the "raw" routines in pc/a20.c.
-   They can be revectored to other routines,
-   e.g. to use a HIMEM driver's facilities.  */
-extern void (*i16_enable_a20)(void);
-extern void (*i16_disable_a20)(void);
-
-#endif _I386_PC_A20_H_
diff --git a/i386/pc/i16/i16_bios.h b/i386/pc/i16/i16_bios.h
deleted file mode 100644
index 29dc2d8..0000000
--- a/i386/pc/i16/i16_bios.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-#ifndef _I16_BIOS_H_
-#define _I16_BIOS_H_
-
-#include <mach/inline.h>
-
-
-MACH_INLINE void i16_bios_putchar(int c)
-{
-	asm volatile("int $0x10" : : "a" (0x0e00 | (c & 0xff)), "b" (0x07));
-}
-
-MACH_INLINE int i16_bios_getchar()
-{
-	int c;
-	asm volatile("int $0x16" : "=a" (c) : "a" (0x0000));
-	c &= 0xff;
-	return c;
-}
-
-MACH_INLINE void i16_bios_warm_boot(void)
-{
-	asm volatile("
-		cli
-		movw	$0x40,%ax
-		movw	%ax,%ds
-		movw	$0x1234,0x72
-		ljmp	$0xffff,$0x0000
-	");
-}
-
-MACH_INLINE void i16_bios_cold_boot(void)
-{
-	asm volatile("
-		cli
-		movw	$0x40,%ax
-		movw	%ax,%ds
-		movw	$0x0000,0x72
-		ljmp	$0xffff,$0x0000
-	");
-}
-
-MACH_INLINE unsigned char i16_bios_copy_ext_mem(
-	unsigned src_la, unsigned dest_la, unsigned short word_count)
-{
-	char buf[48];
-	unsigned short i, rc;
-
-	/* Initialize the descriptor structure.  */
-	for (i = 0; i < sizeof(buf); i++)
-		buf[i] = 0;
-	*((unsigned short*)(buf+0x10)) = 0xffff; /* source limit */
-	*((unsigned long*)(buf+0x12)) = src_la; /* source linear address */
-	*((unsigned char*)(buf+0x15)) = 0x93; /* source access rights */
-	*((unsigned short*)(buf+0x18)) = 0xffff; /* dest limit */
-	*((unsigned long*)(buf+0x1a)) = dest_la; /* dest linear address */
-	*((unsigned char*)(buf+0x1d)) = 0x93; /* dest access rights */
-
-#if 0
-	i16_puts("buf:");
-	for (i = 0; i < sizeof(buf); i++)
-		i16_writehexb(buf[i]);
-	i16_puts("");
-#endif
-
-	/* Make the BIOS call to perform the copy.  */
-	asm volatile("
-		int	$0x15
-	" : "=a" (rc)
-	  : "a" ((unsigned short)0x8700),
-	    "c" (word_count),
-	    "S" ((unsigned short)(unsigned)buf));
-
-	return rc >> 8;
-}
-
-#endif _I16_BIOS_H_
diff --git a/i386/pc/i16/i16_exit.c b/i386/pc/i16/i16_exit.c
deleted file mode 100644
index 674033a..0000000
--- a/i386/pc/i16/i16_exit.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/code16.h>
-
-#include "i16_bios.h"
-
-
-CODE16
-
-void i16_exit(int rc)
-{
-	i16_puts("Press any key to reboot.");
-	i16_bios_getchar();
-	i16_bios_warm_boot();
-}
-
diff --git a/i386/pc/i16/i16_ext_mem.c b/i386/pc/i16/i16_ext_mem.c
deleted file mode 100644
index 08cbecf..0000000
--- a/i386/pc/i16/i16_ext_mem.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/code16.h>
-#include <mach/machine/vm_types.h>
-#include <mach/machine/far_ptr.h>
-#include <mach/machine/proc_reg.h>
-
-#include "i16_bios.h"
-#include "phys_mem.h"
-#include "vm_param.h"
-#include "debug.h"
-
-
-static vm_offset_t ext_mem_phys_free_mem;
-static vm_size_t ext_mem_phys_free_size;
-
-
-CODE32
-
-int ext_mem_collect(void)
-{
-	if (ext_mem_phys_free_mem)
-	{
-		phys_mem_add(ext_mem_phys_free_mem, ext_mem_phys_free_size);
-		ext_mem_phys_free_mem = 0;
-	}
-}
-
-CODE16
-
-void i16_ext_mem_check()
-{
-	vm_offset_t ext_mem_top, ext_mem_bot;
-	unsigned short ext_mem_k;
-
-	/* Find the top of available extended memory.  */
-	asm volatile("
-		int	$0x15
-		jnc	1f
-		xorw	%%ax,%%ax
-	1:
-	" : "=a" (ext_mem_k)
-	  : "a" (0x8800));
-	ext_mem_top = 0x100000 + (vm_offset_t)ext_mem_k * 1024;
-
-	/* XXX check for >16MB memory using function 0xc7 */
-
-	ext_mem_bot = 0x100000;
-
-	/* Check for extended memory allocated bottom-up: method 1.
-	   This uses the technique (and, loosely, the code)
-	   described in the VCPI spec, version 1.0.  */
-	if (ext_mem_top > ext_mem_bot)
-	{
-		asm volatile("
-			pushw	%%es
-
-			xorw	%%ax,%%ax
-			movw	%%ax,%%es
-			movw	%%es:0x19*4+2,%%ax
-			movw	%%ax,%%es
-
-			movw	$0x12,%%di
-			movw	$7,%%cx
-			rep
-			cmpsb
-			jne	1f
-
-			xorl	%%edx,%%edx
-			movb	%%es:0x2e,%%dl
-			shll	$16,%%edx
-			movw	%%es:0x2c,%%dx
-
-		1:
-			popw	%%es
-		" : "=d" (ext_mem_bot)
-		  : "d" (ext_mem_bot),
-		    "S" ((unsigned short)(vm_offset_t)"VDISK V")
-		  : "eax", "ecx", "esi", "edi");
-	}
-	i16_assert(ext_mem_bot >= 0x100000);
-
-	/* Check for extended memory allocated bottom-up: method 2.
-	   This uses the technique (and, loosely, the code)
-	   described in the VCPI spec, version 1.0.  */
-	if (ext_mem_top > ext_mem_bot)
-	{
-		struct {
-			char pad1[3];
-			char V;
-			long DISK;
-			char pad2[30-8];
-			unsigned short addr;
-		} buf;
-		unsigned char rc;
-
-		i16_assert(sizeof(buf) == 0x20);
-		rc = i16_bios_copy_ext_mem(0x100000, kvtolin((vm_offset_t)&buf), sizeof(buf)/2);
-		if ((rc == 0) && (buf.V == 'V') && (buf.DISK == 'DISK'))
-		{
-			vm_offset_t new_bot = (vm_offset_t)buf.addr << 10;
-			i16_assert(new_bot > 0x100000);
-			if (new_bot > ext_mem_bot)
-				ext_mem_bot = new_bot;
-		}
-	}
-	i16_assert(ext_mem_bot >= 0x100000);
-
-	if (ext_mem_top > ext_mem_bot)
-	{
-		ext_mem_phys_free_mem = ext_mem_bot;
-		ext_mem_phys_free_size = ext_mem_top - ext_mem_bot;
-
-		/* We need to update phys_mem_max here
-		   instead of just letting phys_mem_add() do it
-		   when the memory is collected with phys_mem_collect(),
-		   because VCPI initialization needs to know the top of physical memory
-		   before phys_mem_collect() is called.
-		   See i16_vcpi.c for the gross details.  */
-		if (ext_mem_top > phys_mem_max)
-			phys_mem_max = ext_mem_top;
-	}
-}
-
-void i16_ext_mem_shutdown()
-{
-	/* We didn't actually allocate the memory,
-	   so no need to deallocate it... */
-}
-
diff --git a/i386/pc/i16/i16_init.c b/i386/pc/i16/i16_init.c
deleted file mode 100644
index 23a51df..0000000
--- a/i386/pc/i16/i16_init.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/code16.h>
-#include <mach/machine/proc_reg.h>
-
-#include "vm_param.h"
-
-
-/* Code segment we originally had when we started in real mode.  */
-unsigned short real_cs;
-
-/* Virtual address of physical memory.  */
-vm_offset_t phys_mem_va;
-
-/* Physical address of start of boot image.  */
-vm_offset_t boot_image_pa;
-
-/* Upper limit of known physical memory.  */
-vm_offset_t phys_mem_max;
-
-
-CODE16
-
-#include "i16_bios.h"
-
-/* Called by i16_crt0 (or the equivalent)
-   to set up our basic 16-bit runtime environment
-   before calling i16_main().  */
-void i16_init(void)
-{
-	/* Find our code/data/everything segment.  */
-	real_cs = get_cs();
-
-	/* Find out where in physical memory we got loaded.  */
-	boot_image_pa = real_cs << 4;
-
-	/* Find out where the bottom of physical memory is.
-	   (We won't be able to directly use it for 32-bit accesses
-	   until we actually get into 32-bit mode.)  */
-	phys_mem_va = -boot_image_pa;
-
-	/* The base of linear memory is at the same place,
-	   at least until we turn paging on.  */
-	linear_base_va = phys_mem_va;
-}
-
diff --git a/i386/pc/i16/i16_main.c b/i386/pc/i16/i16_main.c
deleted file mode 100644
index 328cceb..0000000
--- a/i386/pc/i16/i16_main.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/code16.h>
-
-
-CODE16
-
-void i16_main(void)
-{
-	i16_init();
-
-	/* Grab all the memory we can find.  */
-	i16_ext_mem_check();
-
-	i16_raw_start();
-}
-
diff --git a/i386/pc/i16/i16_pic.c b/i386/pc/i16/i16_pic.c
deleted file mode 100644
index 3ff2697..0000000
--- a/i386/pc/i16/i16_pic.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/pio.h>
-
-#include "pic.h"
-#include "i16.h"
-
-CODE16
-
-/* Program the PICs to use a different set of interrupt vectors.
-   Assumes processor I flag is off.  */
-void i16_pic_set_master(int base)
-{
-	unsigned char old_mask;
-
-	/* Save the original interrupt mask.  */
-	old_mask = inb(MASTER_OCW);	PIC_DELAY();
-
-	/* Initialize the master PIC.  */
-	outb(MASTER_ICW, PICM_ICW1);	PIC_DELAY();
-	outb(MASTER_OCW, base);		PIC_DELAY();
-	outb(MASTER_OCW, PICM_ICW3);	PIC_DELAY();
-	outb(MASTER_OCW, PICM_ICW4);	PIC_DELAY();
-
-	/* Restore the original interrupt mask.  */
-	outb(MASTER_OCW, old_mask);	PIC_DELAY();
-}
-
-void i16_pic_set_slave(int base)
-{
-	unsigned char old_mask;
-
-	/* Save the original interrupt mask.  */
-	old_mask = inb(SLAVES_OCW);	PIC_DELAY();
-
-	/* Initialize the slave PIC.  */
-	outb(SLAVES_ICW, PICS_ICW1);	PIC_DELAY();
-	outb(SLAVES_OCW, base);		PIC_DELAY();
-	outb(SLAVES_OCW, PICS_ICW3);	PIC_DELAY();
-	outb(SLAVES_OCW, PICS_ICW4);	PIC_DELAY();
-
-	/* Restore the original interrupt mask.  */
-	outb(SLAVES_OCW, old_mask);	PIC_DELAY();
-}
-
diff --git a/i386/pc/i16/i16_putchar.c b/i386/pc/i16/i16_putchar.c
deleted file mode 100644
index 365f4f8..0000000
--- a/i386/pc/i16/i16_putchar.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/code16.h>
-
-#include "i16_bios.h"
-
-CODE16
-
-void i16_putchar(int ch)
-{
-	if (ch == '\n')
-		i16_bios_putchar('\r');
-	i16_bios_putchar(ch);
-}
-
diff --git a/i386/pc/i16/i16_raw.c b/i386/pc/i16/i16_raw.c
deleted file mode 100644
index 1f705d3..0000000
--- a/i386/pc/i16/i16_raw.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-/*
-	This file rovides a default implementation
-	of real/pmode switching code.
-	Assumes that, as far as it's concerned,
-	low linear address always map to physical addresses.
-	(The low linear mappings can be changed,
-	but must be changed back before switching back to real mode.)
-
-	Provides:
-		i16_raw_switch_to_pmode()
-		i16_raw_switch_to_real_mode()
-
-		i16_raw_start()
-			Called in real mode.
-			Initializes the pmode switching system,
-			switches to pmode for the first time,
-			and calls the 32-bit function raw_start().
-
-	Depends on:
-
-		paging.h:
-			raw_paging_enable()
-			raw_paging_disable()
-			raw_paging_init()
-
-		a20.h:
-			i16_enable_a20()
-			i16_disable_a20()
-
-		real.h:
-			real_cs
-*/
-
-#include <mach/boolean.h>
-#include <mach/machine/code16.h>
-#include <mach/machine/vm_param.h>
-#include <mach/machine/proc_reg.h>
-#include <mach/machine/pio.h>
-#include <mach/machine/seg.h>
-#include <mach/machine/eflags.h>
-#include <mach/machine/pmode.h>
-
-#include "config.h"
-#include "cpu.h"
-#include "i16.h"
-#include "vm_param.h"
-#include "pic.h"
-#include "debug.h"
-#include "i16_a20.h"
-#include "i16_switch.h"
-
-int irq_master_base, irq_slave_base;
-
-/* Set to true when everything is initialized properly.  */
-static boolean_t inited;
-
-/* Saved value of eflags register for real mode.  */
-static unsigned real_eflags;
-
-
-
-#ifdef ENABLE_PAGING
-#define RAW_PAGING_ENABLE() raw_paging_enable()
-#define RAW_PAGING_DISABLE() raw_paging_disable()
-#define RAW_PAGING_INIT() raw_paging_init()
-#else
-#define RAW_PAGING_ENABLE() ((void)0)
-#define RAW_PAGING_DISABLE() ((void)0)
-#define RAW_PAGING_INIT() ((void)0)
-#endif
-
-
-CODE16
-
-void i16_raw_switch_to_pmode()
-{
-	/* No interrupts from now on please.  */
-	i16_cli();
-
-	/* Save the eflags register for switching back later.  */
-	real_eflags = get_eflags();
-
-	/* Enable the A20 address line.  */
-	i16_enable_a20();
-
-	/* Load the GDT.
-	   Note that we have to do this each time we enter pmode,
-	   not just the first,
-	   because other real-mode programs may have switched to pmode
-	   and back again in the meantime, trashing the GDT pointer.  */
-	{
-		struct pseudo_descriptor pdesc;
-
-		pdesc.limit = sizeof(cpu[0].tables.gdt)-1;
-		pdesc.linear_base = boot_image_pa
-				    + (vm_offset_t)&cpu[0].tables.gdt;
-		i16_set_gdt(&pdesc);
-	}
-
-	/* Switch into protected mode.  */
-	i16_enter_pmode(KERNEL_16_CS);
-
-	/* Reload all the segment registers from the new GDT.  */
-	set_ds(KERNEL_DS);
-	set_es(KERNEL_DS);
-	set_fs(0);
-	set_gs(0);
-	set_ss(KERNEL_DS);
-
-	i16_do_32bit(
-
-		if (inited)
-		{
-			/* Turn paging on if necessary.  */
-			RAW_PAGING_ENABLE();
-
-			/* Load the CPU tables into the processor.  */
-			cpu_tables_load(&cpu[0]);
-
-			/* Program the PIC so the interrupt vectors won't
-			   conflict with the processor exception vectors.  */
-			pic_init(PICM_VECTBASE, PICS_VECTBASE);
-		}
-
-		/* Make sure our flags register is appropriate.  */
-		set_eflags((get_eflags()
-			   & ~(EFL_IF | EFL_DF | EFL_NT))
-			   | EFL_IOPL_USER);
-	);
-}
-
-void i16_raw_switch_to_real_mode()
-{
-	/* Make sure interrupts are disabled.  */
-	cli();
-
-	/* Avoid sending DOS bogus coprocessor exceptions.
-	   XXX should we save/restore all of CR0?  */
-	i16_clts();
-
-	i16_do_32bit(
-		/* Turn paging off if necessary.  */
-		RAW_PAGING_DISABLE();
-
-		/* Reprogram the PIC back to the settings DOS expects.  */
-		pic_init(0x08, 0x70);
-	);
-
-	/* Make sure all the segment registers are 16-bit.
-	   The code segment definitely is already,
-	   because we're running 16-bit code.  */
-	set_ds(KERNEL_16_DS);
-	set_es(KERNEL_16_DS);
-	set_fs(KERNEL_16_DS);
-	set_gs(KERNEL_16_DS);
-	set_ss(KERNEL_16_DS);
-
-	/* Switch back to real mode.  */
-	i16_leave_pmode(real_cs);
-
-	/* Load the real-mode segment registers.  */
-	set_ds(real_cs);
-	set_es(real_cs);
-	set_fs(real_cs);
-	set_gs(real_cs);
-	set_ss(real_cs);
-
-	/* Load the real-mode IDT.  */
-	{
-		struct pseudo_descriptor pdesc;
-
-		pdesc.limit = 0xffff;
-		pdesc.linear_base = 0;
-		i16_set_idt(&pdesc);
-	}
-
-	/* Disable the A20 address line.  */
-	i16_disable_a20();
-
-	/* Restore the eflags register to its original real-mode state.
-	   Note that this will leave interrupts disabled
-	   since it was saved after the cli() above.  */
-	set_eflags(real_eflags);
-}
-
-void i16_raw_start()
-{
-	/* Make sure we're not already in protected mode.  */
-	if (i16_get_msw() & CR0_PE)
-		i16_die("The processor is in an unknown "
-			"protected mode environment.");
-
-	do_debug(i16_puts("Real mode detected"));
-
-	/* Minimally initialize the GDT.  */
-	i16_gdt_init_temp();
-
-	/* Switch to protected mode for the first time.
-	   This won't load all the processor tables and everything yet,
-	   since they're not fully initialized.  */
-	i16_raw_switch_to_pmode();
-
-	/* We can now hop in and out of 32-bit mode at will.  */
-	i16_do_32bit(
-
-		/* Now that we can access all physical memory,
-		   collect the memory regions we discovered while in 16-bit mode
-		   and add them to our free memory list.
-		   We can't do this before now because the free list nodes
-		   are stored in the free memory itself,
-		   which is probably out of reach of our 16-bit segments.  */
-		phys_mem_collect();
-
-		/* Initialize paging if necessary.
-		   Do it before initializing the other processor tables
-		   because they might have to be located
-		   somewhere in high linear memory.  */
-		RAW_PAGING_INIT();
-
-		/* Initialize the processor tables.  */
-		cpu_init(&cpu[0]);
-
-		/* Initialize the hardware interrupt vectors in the IDT.  */
-		irq_master_base = PICM_VECTBASE;
-		irq_slave_base = PICS_VECTBASE;
-		idt_irq_init();
-
-		inited = TRUE;
-
-		/* Switch to real mode and back again once more,
-		   to make sure everything's loaded properly.  */
-		do_16bit(
-			i16_raw_switch_to_real_mode();
-			i16_raw_switch_to_pmode();
-		);
-
-		raw_start();
-	);
-}
-
-void (*i16_switch_to_real_mode)() = i16_raw_switch_to_real_mode;
-void (*i16_switch_to_pmode)() = i16_raw_switch_to_pmode;
-
diff --git a/i386/pc/i16/i16_raw_test_a20.S b/i386/pc/i16/i16_raw_test_a20.S
deleted file mode 100644
index a934e12..0000000
--- a/i386/pc/i16/i16_raw_test_a20.S
+++ /dev/null
@@ -1,35 +0,0 @@
-
-#include <mach/machine/asm.h>
-
-	.text
-	.code16
-
-/*
- * Test the A20 address line; return true if it is enabled.
- */
-ENTRY(i16_raw_test_a20)
-	xorw	%ax,%ax
-	movw	%ax,%fs
-	notw	%ax
-	movw	%ax,%gs
-
-	/* See if the values in already in the corresponding locations
-	   are the same.  */
-	movw	%fs:0,%ax
-	cmpw	%gs:16,%ax
-	jnz	1f
-
-	/* Yes; try changing one and see if they're still the same.  */
-	movw	%ax,%dx
-	notw	%ax
-	movw	%ax,%fs:0
-	cmpw	%gs:16,%ax
-	movw	%dx,%fs:0
-	jnz	1f
-
-	xorl	%eax,%eax
-	ret
-1:
-	movl	$1,%eax
-	ret
-
diff --git a/i386/pc/i16/i16_real_int.S b/i386/pc/i16/i16_real_int.S
deleted file mode 100644
index f05077e..0000000
--- a/i386/pc/i16/i16_real_int.S
+++ /dev/null
@@ -1,84 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/asm.h>
-
-#include "pc_asm.h"
-
-	.text
-	.code16
-
-ENTRY(i16_real_int)
-	pushf
-	pushl	%ebx
-	pushl	%esi
-	pushl	%edi
-	pushl	%ebp
-
-	cli
-
-	movl	6*4(%esp),%eax
-	movb	%al,1f+1
-
-	movl	7*4(%esp),%ebp
-	movl	RCD_EAX(%ebp),%eax
-	movl	RCD_EBX(%ebp),%ebx
-	movl	RCD_ECX(%ebp),%ecx
-	movl	RCD_EDX(%ebp),%edx
-	movl	RCD_ESI(%ebp),%esi
-	movl	RCD_EDI(%ebp),%edi
-	movw	RCD_DS(%ebp),%ds
-	movw	RCD_ES(%ebp),%es
-	/* XXX flags */
-	movl	RCD_EBP(%ebp),%ebp
-
-1:	int	$0
-
-	pushl	%ebp
-	movl	8*4(%esp),%ebp
-	popl	RCD_EBP(%ebp)
-
-	movl	%eax,RCD_EAX(%ebp)
-	movl	%ebx,RCD_EBX(%ebp)
-	movl	%ecx,RCD_ECX(%ebp)
-	movl	%edx,RCD_EDX(%ebp)
-	movl	%esi,RCD_ESI(%ebp)
-	movl	%edi,RCD_EDI(%ebp)
-	movw	%ds,RCD_DS(%ebp)
-	movw	%es,RCD_ES(%ebp)
-
-	pushf
-	popl	%eax
-	movw	%ax,RCD_FLAGS(%ebp)
-
-	movw	%ss,%ax
-	movw	%ax,%ds
-	movw	%ax,%es
-
-	popl	%ebp
-	popl	%edi
-	popl	%esi
-	popl	%ebx
-	popf
-	ret
-
diff --git a/i386/pc/i16/i16_switch.h b/i386/pc/i16/i16_switch.h
deleted file mode 100644
index b7ecf18..0000000
--- a/i386/pc/i16/i16_switch.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-#ifndef _I386_PC_SWITCH_H_
-#define _I386_PC_SWITCH_H_
-
-/* Vectors to routines to switch between real and protected mode.  */
-extern void (*i16_switch_to_real_mode)();
-extern void (*i16_switch_to_pmode)();
-
-#endif _I386_PC_SWITCH_H_
diff --git a/i386/pc/i16/phys_mem_collect.c b/i386/pc/i16/phys_mem_collect.c
deleted file mode 100644
index bcb0c09..0000000
--- a/i386/pc/i16/phys_mem_collect.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/vm_param.h>
-
-#include "phys_mem.h"
-
-void phys_mem_collect(void)
-{
-#define pms(name) name##_collect();
-#include "phys_mem_sources.h"
-#undef pms
-}
-
diff --git a/i386/pc/i16/phys_mem_sources.h b/i386/pc/i16/phys_mem_sources.h
deleted file mode 100644
index 788910d..0000000
--- a/i386/pc/i16/phys_mem_sources.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-pms(ext_mem)
-
diff --git a/i386/pc/i16/raw_exit.c b/i386/pc/i16/raw_exit.c
deleted file mode 100644
index 5ccb69a..0000000
--- a/i386/pc/i16/raw_exit.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/seg.h>
-#include <mach/machine/proc_reg.h>
-
-#include "i16.h"
-#include "debug.h"
-
-
-void raw_exit(int rc)
-{
-	do_16bit(
-		i16_raw_switch_to_real_mode();
-		i16_exit(rc);
-		while (1);
-	);
-}
-
-void (*real_exit)(int rc) = raw_exit;
-
diff --git a/i386/pc/i16/raw_real_int.c b/i386/pc/i16/raw_real_int.c
deleted file mode 100644
index a76d8ca..0000000
--- a/i386/pc/i16/raw_real_int.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/seg.h>
-#include <mach/machine/proc_reg.h>
-
-#include "real.h"
-#include "i16.h"
-#include "debug.h"
-
-
-void raw_real_int(int intnum, struct real_call_data *rcd)
-{
-	assert((get_cs() & 3) == 0);
-
-	do_16bit(
-		unsigned int eflags;
-
-		i16_raw_switch_to_real_mode();
-		i16_real_int(intnum, rcd);
-		i16_raw_switch_to_pmode();
-	);
-}
-
-void (*real_int)(int intnum, struct real_call_data *rcd) = raw_real_int;
-
diff --git a/i386/pc/ipl.h b/i386/pc/ipl.h
deleted file mode 100644
index 5f40660..0000000
--- a/i386/pc/ipl.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* 
- * Mach Operating System
- * Copyright (c) 1991,1990,1989 Carnegie Mellon University
- * All Rights Reserved.
- * 
- * Permission to use, copy, modify and distribute this software and its
- * documentation is hereby granted, provided that both the copyright
- * notice and this permission notice appear in all copies of the
- * software, derivative works or modified versions, and any portions
- * thereof, and that both notices appear in supporting documentation.
- * 
- * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
- * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
- * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- * 
- * Carnegie Mellon requests users of this software to return to
- * 
- *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
- *  School of Computer Science
- *  Carnegie Mellon University
- *  Pittsburgh PA 15213-3890
- * 
- * any improvements or extensions that they make and grant Carnegie Mellon
- * the rights to redistribute these changes.
- */
-/*
-Copyright (c) 1988,1989 Prime Computer, Inc.  Natick, MA 01760
-All Rights Reserved.
-
-Permission to use, copy, modify, and distribute this
-software and its documentation for any purpose and
-without fee is hereby granted, provided that the above
-copyright notice appears in all copies and that both the
-copyright notice and this permission notice appear in
-supporting documentation, and that the name of Prime
-Computer, Inc. not be used in advertising or publicity
-pertaining to distribution of the software without
-specific, written prior permission.
-
-THIS SOFTWARE IS PROVIDED "AS IS", AND PRIME COMPUTER,
-INC. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
-SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN
-NO EVENT SHALL PRIME COMPUTER, INC.  BE LIABLE FOR ANY
-SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
-DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
-PROFITS, WHETHER IN ACTION OF CONTRACT, NEGLIGENCE, OR
-OTHER TORTIOUS ACTION, ARISING OUR OF OR IN CONNECTION
-WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-*/
-
-
-#define SPL0            0
-#define SPL1            1
-#define SPL2            2
-#define SPL3            3
-#define SPL4            4
-#define SPL5            5
-#define SPL6            6
-
-#define SPLPP           5
-#define SPLTTY          6
-#define SPLNI           6
-
-#define IPLHI           8
-#define SPL7            IPLHI
-#define SPLHI           IPLHI
-
-#ifndef	ASSEMBLER
-extern int		(*ivect[])();
-extern int		iunit[];
-extern unsigned char	intpri[];
-#endif	ASSEMBLER
-
diff --git a/i386/pc/irq.h b/i386/pc/irq.h
deleted file mode 100644
index 1f9da9a..0000000
--- a/i386/pc/irq.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-#ifndef _I386_PC_IRQ_H_
-#define _I386_PC_IRQ_H_
-
-/* On normal PCs, there are always 16 IRQ lines.  */
-#define IRQ_COUNT 16
-
-/* Start of hardware interrupt vectors in the IDT.  */
-#define IDT_IRQ_BASE 0x20
-
-/* Variables storing the master and slave PIC interrupt vector base.  */
-extern int irq_master_base, irq_slave_base;
-
-/* Routine called just after entering protected mode for the first time,
-   to set up the IRQ interrupt vectors in the protected-mode IDT.
-   It should initialize IDT entries irq_master_base through irq_master_base+7,
-   and irq_slave_base through irq_slave_base+7.  */
-extern void idt_irq_init(void);
-
-/* Fill an IRQ gate in a CPU's IDT.
-   Always uses an interrupt gate; just set `access' to the privilege level.  */
-#define fill_irq_gate(cpu, irq_num, entry, selector, access)			\
-	fill_idt_gate(cpu, (irq_num) < 8					\
-			   ? irq_master_base+(irq_num)				\
-			   : irq_slave_base+(irq_num)-8,			\
-		  entry, selector, ACC_INTR_GATE | (access))
-
-#endif _I386_PC_IRQ_H_
diff --git a/i386/pc/irq_list.h b/i386/pc/irq_list.h
deleted file mode 100644
index bfd216e..0000000
--- a/i386/pc/irq_list.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-/* This is just a handy file listing all the IRQ's on the PC, for whatever purpose... */
-
-irq(master,0,0)
-irq(master,1,1)
-irq(master,2,2)
-irq(master,3,3)
-irq(master,4,4)
-irq(master,5,5)
-irq(master,6,6)
-irq(master,7,7)
-
-irq(slave,0,8)
-irq(slave,1,9)
-irq(slave,2,10)
-irq(slave,3,11)
-irq(slave,4,12)
-irq(slave,5,13)
-irq(slave,6,14)
-irq(slave,7,15)
-
diff --git a/i386/pc/pc_asm.sym b/i386/pc/pc_asm.sym
deleted file mode 100644
index e05677e..0000000
--- a/i386/pc/pc_asm.sym
+++ /dev/null
@@ -1,42 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include "real.h"
-#include "real_tss.h"
-
-offset	real_call_data	rcd	eax
-offset	real_call_data	rcd	ebx
-offset	real_call_data	rcd	ecx
-offset	real_call_data	rcd	edx
-offset	real_call_data	rcd	esi
-offset	real_call_data	rcd	edi
-offset	real_call_data	rcd	ebp
-offset	real_call_data	rcd	flags
-offset	real_call_data	rcd	ds
-offset	real_call_data	rcd	es
-offset	real_call_data	rcd	fs
-offset	real_call_data	rcd	gs
-size	real_call_data	rcd
-
-expr	REAL_TSS_SIZE
-
diff --git a/i386/pc/phys_mem.h b/i386/pc/phys_mem.h
deleted file mode 100644
index 558267c..0000000
--- a/i386/pc/phys_mem.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-/*
- * PC-specific flag bits and priority values
- * for the List Memory Manager (LMM)
- * relevant for kernels managing physical memory.
- */
-#ifndef _I386_PC_PHYS_MEM_H_
-#define _I386_PC_PHYS_MEM_H_
-
-#include_next "phys_mem.h"
-
-/* <1MB memory is most precious, then <16MB memory, then high memory.
-   Assign priorities to each region accordingly
-   so that high memory will be used first when possible,
-   then 16MB memory, then 1MB memory.  */
-#define LMM_PRI_1MB	-2
-#define LMM_PRI_16MB	-1
-#define LMM_PRI_HIGH	0
-
-/* For memory <1MB, both LMMF_1MB and LMMF_16MB will be set.
-   For memory from 1MB to 16MB, only LMMF_16MB will be set.
-   For all memory higher than that, neither will be set.  */
-#define LMMF_1MB	0x01
-#define LMMF_16MB	0x02
-
-
-/* Call one of these routines to add a chunk of physical memory found
-   to the malloc_lmm free list.
-   It assigns the appropriate flags and priorities to the region,
-   as defined above, breaking up the region if necessary.  */
-void phys_mem_add(vm_offset_t min, vm_size_t size);
-void i16_phys_mem_add(vm_offset_t min, vm_size_t size);
-
-#endif _I386_PC_PHYS_MEM_H_
diff --git a/i386/pc/phys_mem_add.c b/i386/pc/phys_mem_add.c
deleted file mode 100644
index 79fd3ce..0000000
--- a/i386/pc/phys_mem_add.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/vm_types.h>
-#include <mach/lmm.h>
-#include <malloc.h>
-
-#include "vm_param.h"
-#include "phys_mem.h"
-
-/* Note that this routine takes _physical_ addresses, not virtual.  */
-void phys_mem_add(vm_offset_t min, vm_size_t size)
-{
-	vm_offset_t max = min + size;
-
-	/* Add the memory region with the proper flags and priority.  */
-	if (max <= 1*1024*1024)
-	{
-		lmm_add(&malloc_lmm, phystokv(min), size,
-			LMMF_1MB | LMMF_16MB, LMM_PRI_1MB);
-	}
-	else
-	{
-		if (min < 16*1024*1024)
-		{
-			vm_offset_t nmax = max;
-			if (nmax > 16*1024*1024) nmax = 16*1024*1024;
-			lmm_add(&malloc_lmm, phystokv(min), nmax - min,
-				LMMF_16MB, LMM_PRI_16MB);
-		}
-		if (max > 16*1024*1024)
-		{
-			vm_offset_t nmin = min;
-			if (nmin < 16*1024*1024) nmin = 16*1024*1024;
-			lmm_add(&malloc_lmm, phystokv(nmin), max - nmin, 0, 0);
-		}
-	}
-
-	if (max > phys_mem_max)
-		phys_mem_max = max;
-}
-
diff --git a/i386/pc/pic.c b/i386/pc/pic.c
deleted file mode 100644
index eaf7b56..0000000
--- a/i386/pc/pic.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/* 
- * Mach Operating System
- * Copyright (c) 1991,1990,1989 Carnegie Mellon University
- * All Rights Reserved.
- * 
- * Permission to use, copy, modify and distribute this software and its
- * documentation is hereby granted, provided that both the copyright
- * notice and this permission notice appear in all copies of the
- * software, derivative works or modified versions, and any portions
- * thereof, and that both notices appear in supporting documentation.
- * 
- * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
- * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
- * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- * 
- * Carnegie Mellon requests users of this software to return to
- * 
- *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
- *  School of Computer Science
- *  Carnegie Mellon University
- *  Pittsburgh PA 15213-3890
- * 
- * any improvements or extensions that they make and grant Carnegie Mellon
- * the rights to redistribute these changes.
- */
-/*
-Copyright (c) 1988,1989 Prime Computer, Inc.  Natick, MA 01760
-All Rights Reserved.
-
-Permission to use, copy, modify, and distribute this
-software and its documentation for any purpose and
-without fee is hereby granted, provided that the above
-copyright notice appears in all copies and that both the
-copyright notice and this permission notice appear in
-supporting documentation, and that the name of Prime
-Computer, Inc. not be used in advertising or publicity
-pertaining to distribution of the software without
-specific, written prior permission.
-
-THIS SOFTWARE IS PROVIDED "AS IS", AND PRIME COMPUTER,
-INC. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
-SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN
-NO EVENT SHALL PRIME COMPUTER, INC.  BE LIABLE FOR ANY
-SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
-DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
-PROFITS, WHETHER IN ACTION OF CONTRACT, NEGLIGENCE, OR
-OTHER TORTIOUS ACTION, ARISING OUR OF OR IN CONNECTION
-WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-*/
-
-#include <mach/machine/pio.h>
-
-#include <sys/types.h>
-
-#include "ipl.h"
-#include "pic.h"
-
-
-u_short pic_mask[SPLHI+1];
-
-int		curr_ipl;
-u_short		curr_pic_mask;
-
-u_short		orig_pic_mask;
-int		orig_pic_mask_initialized;
-
-u_char intpri[NINTR];
-
-/*
-** picinit() - This routine 
-**		* Establishes a table of interrupt vectors
-**		* Establishes a table of interrupt priority levels
-**		* Establishes a table of interrupt masks to be put
-**			in the PICs.
-**		* Establishes location of PICs in the system 
-**		* Initialises them
-**
-**	At this stage the interrupt functionality of this system should be 
-**	coplete.
-**
-*/
-
-
-/*
-** 1. First we form a table of PIC masks - rather then calling form_pic_mask()
-**	each time there is a change of interrupt level - we will form a table
-**	of pic masks, as there are only 7 interrupt priority levels.
-**
-** 2. The next thing we must do is to determine which of the PIC interrupt
-**	request lines have to be masked out, this is done by calling 
-**	form_pic_mask() with a (int_lev) of zero, this will find all the 
-**	interrupt lines that have priority 0, (ie to be ignored).
-**	Then we split this up for the master/slave PICs.
-**
-** 2. Initialise the PICs , master first, then the slave.
-**	All the register field definitions are described in pic_jh.h, also
-**	the settings of these fields for the various registers are selected.
-**
-*/
-
-pic_init(int master_base, int slave_base)
-{
-	u_short PICM_OCW1, PICS_OCW1 ;
-	u_short PICM_OCW2, PICS_OCW2 ;
-	u_short PICM_OCW3, PICS_OCW3 ;
-	u_short i;
-
-	if (!orig_pic_mask_initialized)
-	{
-		unsigned omaster, oslave;
-
-		omaster = inb(MASTER_OCW);
-		PIC_DELAY();
-		oslave = inb(SLAVES_OCW);
-		PIC_DELAY();
-
-		orig_pic_mask = omaster | (oslave << 8);
-		orig_pic_mask_initialized = 1;
-	}
-
-
-	/*
-	** 1. Form pic mask table
-	*/
-
-	form_pic_mask();
-
-	/*
-	** 1a. Select current SPL.
-	*/
-
-	curr_ipl = SPLHI;
-	curr_pic_mask = pic_mask[SPLHI];
-
-	/*
-	** 3. Select options for each ICW and each OCW for each PIC.
-	*/
-
-#if 0
-	PICM_ICW1 = (ICW_TEMPLATE | EDGE_TRIGGER | ADDR_INTRVL8
-			| CASCADE_MODE | ICW4__NEEDED);
-
-	PICS_ICW1 = (ICW_TEMPLATE | EDGE_TRIGGER | ADDR_INTRVL8
-			| CASCADE_MODE | ICW4__NEEDED);
-
-	PICM_ICW2 = master_base;
-	PICS_ICW2 = slave_base;
-
-	PICM_ICW3 = ( SLAVE_ON_IR2 );
-	PICS_ICW3 = ( I_AM_SLAVE_2 );
-
-	PICM_ICW4 = (SNF_MODE_DIS | NONBUFD_MODE | NRML_EOI_MOD
-			| I8086_EMM_MOD);
-	PICS_ICW4 = (SNF_MODE_DIS | NONBUFD_MODE | NRML_EOI_MOD
-			| I8086_EMM_MOD);
-#endif
-
-	PICM_OCW1 = (curr_pic_mask & 0x00FF);
-	PICS_OCW1 = ((curr_pic_mask & 0xFF00)>>8);
-
-	PICM_OCW2 = NON_SPEC_EOI;
-	PICS_OCW2 = NON_SPEC_EOI;
-
-	PICM_OCW3 = (OCW_TEMPLATE | READ_NEXT_RD | READ_IR_ONRD );
-	PICS_OCW3 = (OCW_TEMPLATE | READ_NEXT_RD | READ_IR_ONRD );
-
-
-	/* 
-	** 4.	Initialise master - send commands to master PIC
-	*/ 
-
-	outb ( MASTER_ICW, PICM_ICW1 );
-	PIC_DELAY();
-	outb ( MASTER_OCW, master_base );
-	PIC_DELAY();
-	outb ( MASTER_OCW, PICM_ICW3 );
-	PIC_DELAY();
-	outb ( MASTER_OCW, PICM_ICW4 );
-	PIC_DELAY();
-
-#if 0
-	outb ( MASTER_OCW, PICM_MASK );
-	PIC_DELAY();
-	outb ( MASTER_ICW, PICM_OCW3 );
-	PIC_DELAY();
-#endif
-
-	/*
-	** 5.	Initialise slave - send commands to slave PIC
-	*/
-
-	outb ( SLAVES_ICW, PICS_ICW1 );
-	PIC_DELAY();
-	outb ( SLAVES_OCW, slave_base );
-	PIC_DELAY();
-	outb ( SLAVES_OCW, PICS_ICW3 );
-	PIC_DELAY();
-	outb ( SLAVES_OCW, PICS_ICW4 );
-	PIC_DELAY();
-
-#if 0
-	outb ( SLAVES_OCW, PICS_OCW1 );
-	PIC_DELAY();
-	outb ( SLAVES_ICW, PICS_OCW3 );
-	PIC_DELAY();
-
-	/*
-	** 6. Initialise interrupts
-	*/
-	outb ( MASTER_OCW, PICM_OCW1 );
-	PIC_DELAY();
-#endif
-
-	outb(MASTER_OCW, orig_pic_mask);
-	PIC_DELAY();
-	outb(SLAVES_OCW, orig_pic_mask >> 8);
-	PIC_DELAY();
-
-#if 0
-	/* XXX */
-	if (master_base != 8)
-	{
-		outb(0x21, 0xff);
-		PIC_DELAY();
-		outb(0xa1, 0xff);
-		PIC_DELAY();
-	}
-#endif
-
-	outb(MASTER_ICW, NON_SPEC_EOI);
-	PIC_DELAY();
-	outb(SLAVES_ICW, NON_SPEC_EOI);
-	PIC_DELAY();
-
-	inb(0x60);
-
-}
-
-/*
-** form_pic_mask(int_lvl) 
-**
-**	For a given interrupt priority level (int_lvl), this routine goes out 
-** and scans through the interrupt level table, and forms a mask based on the
-** entries it finds there that have the same or lower interrupt priority level
-** as (int_lvl). It returns a 16-bit mask which will have to be split up between
-** the 2 pics.
-**
-*/
-
-#define SLAVEMASK       (0xFFFF ^ SLAVE_ON_IR2)
-#define SLAVEACTV	0xFF00
-
-form_pic_mask()
-{
-	unsigned short i, j, bit, mask;
-
-	for (i=SPL0; i <= SPLHI; i++) {
-	 	for (j=0x00, bit=0x01, mask = 0; j < NINTR; j++, bit<<=1)
-			if (intpri[j] <= i)
-				mask |= bit;
-
-	 	if ((mask & SLAVEACTV) != SLAVEACTV )	
-			mask &= SLAVEMASK;
-
-		pic_mask[i] = mask;
-	}
-}
-
-#if 0
-
-intnull(unit_dev)
-{
-	printf("intnull(%d)\n", unit_dev);
-}
-
-int prtnull_count = 0;
-prtnull(unit)
-{
-	++prtnull_count;
-}
-
-#endif 0
diff --git a/i386/pc/pic.h b/i386/pc/pic.h
deleted file mode 100644
index 51911cc..0000000
--- a/i386/pc/pic.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/* 
- * Mach Operating System
- * Copyright (c) 1991,1990,1989 Carnegie Mellon University
- * All Rights Reserved.
- * 
- * Permission to use, copy, modify and distribute this software and its
- * documentation is hereby granted, provided that both the copyright
- * notice and this permission notice appear in all copies of the
- * software, derivative works or modified versions, and any portions
- * thereof, and that both notices appear in supporting documentation.
- * 
- * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
- * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
- * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- * 
- * Carnegie Mellon requests users of this software to return to
- * 
- *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
- *  School of Computer Science
- *  Carnegie Mellon University
- *  Pittsburgh PA 15213-3890
- * 
- * any improvements or extensions that they make and grant Carnegie Mellon
- * the rights to redistribute these changes.
- */
-/*
-Copyright (c) 1988,1989 Prime Computer, Inc.  Natick, MA 01760
-All Rights Reserved.
-
-Permission to use, copy, modify, and distribute this
-software and its documentation for any purpose and
-without fee is hereby granted, provided that the above
-copyright notice appears in all copies and that both the
-copyright notice and this permission notice appear in
-supporting documentation, and that the name of Prime
-Computer, Inc. not be used in advertising or publicity
-pertaining to distribution of the software without
-specific, written prior permission.
-
-THIS SOFTWARE IS PROVIDED "AS IS", AND PRIME COMPUTER,
-INC. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
-SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN
-NO EVENT SHALL PRIME COMPUTER, INC.  BE LIABLE FOR ANY
-SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
-DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
-PROFITS, WHETHER IN ACTION OF CONTRACT, NEGLIGENCE, OR
-OTHER TORTIOUS ACTION, ARISING OUR OF OR IN CONNECTION
-WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-*/
-
-#ifndef	_I386_PIC_H_
-#define	_I386_PIC_H_
-
-#include "irq.h"
-
-#define NINTR	0x10
-#define	NPICS	0x02
-
-/*
-** The following are definitions used to locate the PICs in the system
-*/
-
-#define ADDR_PIC_BASE		0x20
-#define OFF_ICW			0x00
-#define OFF_OCW			0x01
-#define SIZE_PIC		0x80
-
-#define MASTER_ICW		(ADDR_PIC_BASE + OFF_ICW)
-#define MASTER_OCW		(ADDR_PIC_BASE + OFF_OCW)
-#define SLAVES_ICW		(ADDR_PIC_BASE + OFF_ICW + SIZE_PIC)
-#define SLAVES_OCW		(ADDR_PIC_BASE + OFF_OCW + SIZE_PIC)
-
-/*
-** The following banks of definitions ICW1, ICW2, ICW3, and ICW4 are used
-** to define the fields of the various ICWs for initialisation of the PICs 
-*/
-
-/*
-**	ICW1				
-*/
-
-#define ICW_TEMPLATE		0x10
-
-#define LEVL_TRIGGER		0x08
-#define EDGE_TRIGGER		0x00
-#define ADDR_INTRVL4		0x04
-#define ADDR_INTRVL8		0x00
-#define SINGLE__MODE		0x02
-#define CASCADE_MODE		0x00
-#define ICW4__NEEDED		0x01
-#define NO_ICW4_NEED		0x00
-
-/*
-**	ICW2
-*/
-
-#define	PICM_VECTBASE		IDT_IRQ_BASE
-#define PICS_VECTBASE		(PICM_VECTBASE + 0x08)
-
-/*
-**	ICW3				
-*/
-
-#define SLAVE_ON_IR0		0x01
-#define SLAVE_ON_IR1		0x02
-#define SLAVE_ON_IR2		0x04
-#define SLAVE_ON_IR3		0x08
-#define SLAVE_ON_IR4		0x10
-#define SLAVE_ON_IR5		0x20
-#define SLAVE_ON_IR6		0x40
-#define SLAVE_ON_IR7		0x80
-
-#define I_AM_SLAVE_0		0x00
-#define I_AM_SLAVE_1		0x01
-#define I_AM_SLAVE_2		0x02
-#define I_AM_SLAVE_3		0x03
-#define I_AM_SLAVE_4		0x04
-#define I_AM_SLAVE_5		0x05
-#define I_AM_SLAVE_6		0x06
-#define I_AM_SLAVE_7		0x07
-
-/*
-**	ICW4				
-*/
-
-#define SNF_MODE_ENA		0x10
-#define SNF_MODE_DIS		0x00
-#define BUFFERD_MODE		0x08
-#define NONBUFD_MODE		0x00
-#define AUTO_EOI_MOD		0x02
-#define NRML_EOI_MOD		0x00
-#define I8086_EMM_MOD		0x01
-#define SET_MCS_MODE		0x00
-
-/*
-**	OCW1				
-*/
-
-#define PICM_MASK		0xFF
-#define	PICS_MASK		0xFF
-
-/*
-**	OCW2				
-*/
-
-#define NON_SPEC_EOI		0x20
-#define SPECIFIC_EOI		0x30
-#define ROT_NON_SPEC		0x50
-#define SET_ROT_AEOI		0x40
-#define RSET_ROTAEOI		0x00
-#define ROT_SPEC_EOI		0x70
-#define SET_PRIORITY		0x60
-#define NO_OPERATION		0x20
-
-#define SEND_EOI_IR0		0x00
-#define SEND_EOI_IR1		0x01
-#define SEND_EOI_IR2		0x02
-#define SEND_EOI_IR3		0x03
-#define SEND_EOI_IR4		0x04
-#define SEND_EOI_IR5		0x05
-#define SEND_EOI_IR6		0x06
-#define SEND_EOI_IR7		0x07
- 
-/*
-**	OCW3				
-*/
-
-#define OCW_TEMPLATE		0x08
-#define SPECIAL_MASK		0x40
-#define MASK_MDE_SET		0x20
-#define MASK_MDE_RST		0x00
-#define POLL_COMMAND		0x04
-#define NO_POLL_CMND		0x00
-#define READ_NEXT_RD		0x02
-#define READ_IR_ONRD		0x00
-#define READ_IS_ONRD		0x01
-
-
-/*
-**	Standard PIC initialization values for PCs.
-*/
-#define PICM_ICW1	(ICW_TEMPLATE | EDGE_TRIGGER | ADDR_INTRVL8 \
-			 | CASCADE_MODE | ICW4__NEEDED)
-#define PICM_ICW3	(SLAVE_ON_IR2)
-#define PICM_ICW4	(SNF_MODE_DIS | NONBUFD_MODE | NRML_EOI_MOD \
-			 | I8086_EMM_MOD)
-
-#define PICS_ICW1	(ICW_TEMPLATE | EDGE_TRIGGER | ADDR_INTRVL8 \
-			 | CASCADE_MODE | ICW4__NEEDED)
-#define PICS_ICW3	(I_AM_SLAVE_2)
-#define PICS_ICW4	(SNF_MODE_DIS | NONBUFD_MODE | NRML_EOI_MOD \
-			 | I8086_EMM_MOD)
-
-/* Some systems need a little bit of delay
-   while fiddling with PIC registers.  */
-#ifndef ASSEMBLER
-#define PIC_DELAY() asm volatile("jmp 1f; 1: jmp 1f; 1:")
-#else
-#define PIC_DELAY jmp 9f; 9: jmp 9f; 9:
-#endif
-
-
-#endif	_I386_PIC_H_
diff --git a/i386/pc/putchar.c b/i386/pc/putchar.c
deleted file mode 100644
index d5b106c..0000000
--- a/i386/pc/putchar.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/eflags.h>
-
-#include "real.h"
-
-#ifndef ENABLE_IMMCONSOLE
-
-#include <rc.h>
-int putchar(int c)
-{
-
-	if (c == '\n')
-		putchar('\r');
-
-	{
-#if RCLINE >= 0
-		static int serial_inited = 0;
-		if (! serial_inited) {
-			init_serial();
-			serial_inited = 1;
-		}
-		serial_putc(c);
-#else
-		struct real_call_data rcd;
-		rcd.eax = 0x0e00 | (c & 0xff);
-		rcd.ebx = 0x07;
-		rcd.flags = 0;
-		real_int(0x10, &rcd);
-#endif
-	}
-
-	return 0;
-}
-
-#else ENABLE_IMMCONSOLE
-
-void
-putchar(unsigned char c)
-{
-	static int ofs = -1;
-
-	if (ofs < 0)
-	{
-		ofs = 0;
-		putchar('\n');
-	}
-	if (c == '\r')
-	{
-		ofs = 0;
-	}
-	else if (c == '\n')
-	{
-		bcopy(0xb8000+80*2, 0xb8000, 80*2*24);
-		bzero(0xb8000+80*2*24, 80*2);
-		ofs = 0;
-	}
-	else
-	{
-		volatile unsigned char *p;
-
-		if (ofs >= 80)
-		{
-			putchar('\r');
-			putchar('\n');
-		}
-
-		p = (void*)0xb8000 + 80*2*24 + ofs*2;
-		p[0] = c;
-		p[1] = 0x0f;
-		ofs++;
-	}
-}
-
-#endif ENABLE_IMMCONSOLE
diff --git a/i386/pc/real.h b/i386/pc/real.h
deleted file mode 100644
index 4206231..0000000
--- a/i386/pc/real.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-#ifndef _I386_PC_REAL_CALL_H_
-#define _I386_PC_REAL_CALL_H_
-
-/* This structure happens to correspond to the DPMI real-call structure.  */
-struct real_call_data
-{
-	unsigned edi;
-	unsigned esi;
-	unsigned ebp;
-	unsigned reserved;
-	unsigned ebx;
-	unsigned edx;
-	unsigned ecx;
-	unsigned eax;
-	unsigned short flags;
-	unsigned short es;
-	unsigned short ds;
-	unsigned short fs;
-	unsigned short gs;
-	unsigned short ip;
-	unsigned short cs;
-	unsigned short sp;
-	unsigned short ss;
-};
-
-/* Code segment we originally had when we started in real mode.  */
-extern unsigned short real_cs;
-
-extern void (*real_int)(int intnum, struct real_call_data *rcd);
-extern void (*real_exit)(int rc);
-
-#define real_call_data_init(rcd)	\
-	({ (rcd)->flags = 0;		\
-	   (rcd)->ss = 0;		\
-	   (rcd)->sp = 0;		\
-	})
-
-#endif /* _I386_PC_REAL_CALL_H_ */
diff --git a/i386/pc/real_tss.c b/i386/pc/real_tss.c
deleted file mode 100644
index 745a611..0000000
--- a/i386/pc/real_tss.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/tss.h>
-#include <mach/machine/proc_reg.h>
-
-#include "cpu.h"
-#include "real_tss.h"
-#include "vm_param.h"
-#include "config.h"
-
-#ifdef ENABLE_REAL_TSS
-
-static void real_tss_init()
-{
-	/* Only initialize once.  */
-	if (!real_tss.ss0)
-	{
-		/* Initialize the real-mode TSS.  */
-		real_tss.ss0 = KERNEL_DS;
-		real_tss.esp0 = get_esp();
-		real_tss.io_bit_map_offset = sizeof(real_tss);
-
-		/* Set the last byte in the I/O bitmap to all 1's.  */
-		((unsigned char*)&real_tss)[REAL_TSS_SIZE] = 0xff;
-	}
-}
-
-void
-cpu_gdt_init_REAL_TSS(struct cpu *cpu)
-{
-	real_tss_init();
-
-	fill_gdt_descriptor(cpu, REAL_TSS,
-			    kvtolin(&real_tss), REAL_TSS_SIZE-1,
-			    ACC_PL_K|ACC_TSS, 0);
-}
-
-#endif ENABLE_REAL_TSS
diff --git a/i386/pc/real_tss.h b/i386/pc/real_tss.h
deleted file mode 100644
index 2f89547..0000000
--- a/i386/pc/real_tss.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-#ifndef _I386_PC_REAL_TSS_
-#define _I386_PC_REAL_TSS_
-
-#include <mach/machine/tss.h>
-
-extern struct i386_tss real_tss;
-
-/* This size doesn't include the extra required 0xff byte
-   just past the end of the real IOPB.  */
-#define REAL_TSS_SIZE (sizeof(real_tss)+65536/8)
-
-#endif _I386_PC_REAL_TSS_
diff --git a/i386/pc/real_tss_def.S b/i386/pc/real_tss_def.S
deleted file mode 100644
index 1871250..0000000
--- a/i386/pc/real_tss_def.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/asm.h>
-
-#include "config.h"
-#include "pc_asm.h"
-
-#ifdef ENABLE_REAL_TSS
-
-	.data
-	.globl	EXT(real_tss)
-	.comm	EXT(real_tss),REAL_TSS_SIZE+1
-
-#endif ENABLE_REAL_TSS
diff --git a/i386/pc/rv86/config.h b/i386/pc/rv86/config.h
deleted file mode 100644
index 5f971ce..0000000
--- a/i386/pc/rv86/config.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include_next "config.h"
-
-#ifndef ENABLE_REAL_TSS
-#define ENABLE_REAL_TSS
-#endif
-
diff --git a/i386/pc/rv86/gdt_sels.h b/i386/pc/rv86/gdt_sels.h
deleted file mode 100644
index 89a13c7..0000000
--- a/i386/pc/rv86/gdt_sels.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include_next "gdt_sels.h"
-
-/* This is a special TSS with a full IO bitmap
-   that allows access to all I/O ports in v86 mode.
-   It's used for making calls to the real-mode BIOS (or DOS).  */
-gdt_sel(RV86_TSS)
-
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include_next "gdt_sels.h"
-
-/* This is a special TSS with a full IO bitmap
-   that allows access to all I/O ports in v86 mode.
-   It's used for making calls to the real-mode BIOS (or DOS).  */
-gdt_sel(RV86_TSS)
-
diff --git a/i386/pc/rv86/idt_irq_init.c b/i386/pc/rv86/idt_irq_init.c
deleted file mode 100644
index f46882a..0000000
--- a/i386/pc/rv86/idt_irq_init.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include "cpu.h"
-#include "idt.h"
-
-void idt_irq_init()
-{
-	int i;
-
-#define irq(pic,picnum,irqnum)								\
-	{ extern void rv86_reflect_irq##irqnum();					\
-	  fill_idt_gate(&cpu[0], irq_##pic##_base + picnum,				\
-	  	(vm_offset_t)rv86_reflect_irq##irqnum, KERNEL_CS,			\
-		ACC_PL_K|ACC_INTR_GATE);						\
-	}
-#include "irq_list.h"
-#undef irq
-}
-
diff --git a/i386/pc/rv86/rv86_real_int.c b/i386/pc/rv86/rv86_real_int.c
deleted file mode 100644
index d9c35b6..0000000
--- a/i386/pc/rv86/rv86_real_int.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/seg.h>
-#include <mach/machine/proc_reg.h>
-#include <mach/machine/far_ptr.h>
-#include <mach/machine/eflags.h>
-
-#include "vm_param.h"
-#include "real.h"
-#include "real_tss.h"
-#include "cpu.h"
-#include "debug.h"
-
-
-/*
-
-	There seem to be three main ways to handle v86 mode:
-
-	* The v86 environment is just an extension of the normal kernel environment:
-	  you can switch to and from v86 mode just as you can change any other processor state.
-	  You always keep running on the separate "logical" stack,
-	  which is the kernel stack when running in protected mode,
-	  or the user stack when running in v86 mode.
-	  When in v86 mode, the "actual" kernel stack is just a stub
-	  big enough to switch back to the "normal" kernel stack,
-	  which was being used as the user stack while running in v86 mode.
-	  Thus, v86 and protected-mode "segments" of stack data
-	  can be interleaved together on the same logical stack.
-
-		- To make a real int call from kernel pmode,
-		  switch to v86 mode and execute an int instruction,
-		  then switch back to protected mode.
-
-		- To reflect an interrupt to v86 mode:
-
-			> If the processor was running in v86 mode,
-			  just adjust the kernel and user stacks
-			  to emulate a real-mode interrupt, and return.
-
-			> If the processor was running in pmode,
-			  switch to v86 mode and re-trigger the interrupt
-			  with a software int instruction.
-
-		- To handle an interrupt in pmode:
-
-			> If the processor was running in v86 mode,
-			  switch from the stub stack to the user stack that was in use
-			  (could be different from the stack we set originally,
-			  because BIOS/DOS code might have switched stacks!),
-			  call the interrupt handler, switch back, and return.
-
-			> If the processor was running in pmode,
-			  just call the interrupt handler and return.
-
-	  This method only works if the whole "kernel" is <64KB
-	  and generally compatible with real-mode execution.
-	  This is the model my DOS extender currently uses.
-
-	  One major disadvantage of this method
-	  is that interrupt handlers can't run "general" protected-mode code,
-	  such as typical code compiled by GCC.
-	  This is because, if an interrupt occurs while in v86 mode,
-	  the v86-mode ss:sp may point basically anywhere in the low 1MB,
-	  and it therefore it can't be used directly as a pmode stack;
-	  and the only other stack available is the miniscule stub stack.
-	  Since "general" protected-mode code expects a full-size stack
-	  with an SS equal to the normal protected-mode DS,
-	  neither of these available stacks will suffice.
-	  It is impossible to switch back to the original kernel stack
-	  because arbitrary DOS or BIOS code might have switched from it
-	  to a different stack somewhere else in the low 1MB,
-	  and we have no way of telling where the SP was when that happened.
-	  The upshot is that interrupt handlers must be extremely simple;
-	  in MOSS, all they do is post a signal to "the process,"
-	  and return immediately without actually handling the interrupt.
-
-	* The v86 environment is a separate "task" with its own user and kernel stacks;
-	  you switch back and forth as if between multiple ordinary tasks,
-	  the tasks can preempt each other, go idle waiting for events, etc.
-
-		- To make a real int call from kernel pmode,
-		  the task making the call essentially does a synchronous IPC to the v86 task.
-		  If the v86 task is busy with another request or a reflected interrupt,
-		  the calling task will go idle until the v86 task is available.
-
-		- Reflecting an interrupt to v86 mode
-		  basically amounts to sending a Unix-like "signal" to the v86 task:
-
-			> If the processor was running in the v86 task,
-			  just adjust the kernel and user stacks
-			  to emulate a real-mode interrupt, and return.
-
-			> If the processor was running in a protected-mode task
-			  (or another v86-mode task),
-			  post a signal to the v86 task, wake it up if it's asleep,
-			  and invoke the scheduler to switch to the v86 task
-			  if it has a higher priority than the currently running task.
-
-		- To handle an interrupt in pmode,
-		  just call the interrupt handler and return.
-		  It doesn't matter whether the interrupt was from v86 or pmode,
-		  because the kernel stacks look the same in either case.
-
-	  One big problem with this method is that if interrupts are to be handled in v86 mode,
-	  all the typical problems of handling interrupts in user-mode tasks pop up.
-	  In particular, an interrupt can now cause preemption,
-	  so this will break an interruptible but nonpreemptible environment.
-	  (The problem is not that the interrupted task is "preempted"
-	  to switch temporarily to the v86 task to handle the interrupt;
-	  the problem is that when the v86 task is done handling the interrupt,
-	  the scheduler will be invoked and some task other than the interrupted task may be run.)
-
-	  Of course, this is undoubtedly the right solution
-	  if that's the interrupt model the OS is using anyway
-	  (i.e. if the OS already supports user-level protected-mode interrupts).
-
-	* A bastardization of the two above approaches:
-	  treat the v86 environment as a separate "task",
-	  but a special one that doesn't behave at all like other tasks.
-	  The v86 "task" in this case is more of an "interrupt co-stack"
-	  that grows and shrinks alongside the normal interrupt stack
-	  (or the current kernel stack, if interrupts are handled on the kernel stack).
-	  Interrupts and real calls can cause switches between these two interrupt stacks,
-	  but they can't cause preemption in the normal sense.
-	  The route taken while building the stacks is exactly the opposite
-	  the route taken while tearing it down.
-
-	  Now two "kernel stack pointers" have to be maintained all the time instead of one.
-	  When running in protected mode:
-
-	  	- The ESP register contains the pmode stack pointer.
-		- Some global variable contains the v86 stack pointer.
-
-	  When running in v86 mode:
-
-	  	- The ESP register contains the v86 stack pointer.
-		  (Note that BIOS/DOS code can switch stacks,
-		  so at any given time it may point practically anywhere!)
-		- The current tss's esp0 contains the pmode stack pointer.
-
-	  Whenever a switch is made, a stack frame is placed on the new co-stack
-	  indicating that the switch was performed.
-
-		- To make a real int call from kernel pmode,
-		  build a real-mode interrupt stack frame on the v86 interrupt stack,
-		  build a v86-mode trap stack frame on the pmode stack,
-		  set the tss's esp0 to point to the end of that stack frame,
-		  and iret from it.
-		  Then when the magic "done-with-real-call" int instruction is hit,
-		  the pmode interrupt handler will see it
-		  and know to simply destroy the v86 trap stack on the pmode stack.
-
-		- Handling an interrupt can always be thought of as going "through" pmode:
-		  switching from the v86 stack to the pmode stack
-		  if the processor was in v86 mode when the interrupt was taken,
-		  and switching from the pmode stack back to the v86 stack as described above
-		  if the interrupt is to be reflected to v86 mode.
-
-		  Of course, optimized paths are possible:
-
-		- To reflect an interrupt to v86 mode:
-
-			> If the processor was running in v86 mode,
-			  just adjust the kernel and user stack frames and return.
-
-			> If the processor was running in pmode,
-			  do as described above for explicit real int calls.
-
-		- To handle an interrupt in pmode:
-
-			> If the processor was running in v86 mode,
-			  switch to the pmode stack,
-			  stash the old v86 stack pointer variable on the pmode stack,
-			  and set the v86 stack pointer variable to the new location.
-			  Call the interrupt handler,
-			  then tear down everything and return to v86 mode.
-
-	Observation:
-	In the first and third models,
-	explicit real int calls are entirely symmetrical
-	to hardware interrupts from pmode to v86 mode.
-	This is valid because of the interruptible but nonpreemptible model:
-	no scheduling is involved, and the stack(s) will always be torn down
-	in exactly the opposite order in which they were built up.
-	In the second model,
-	explicit real calls are quite different,
-	because the BIOS is interruptible but nonpreemptible:
-	you can reflect an interrupt into the v86 task at any time,
-	but you can only make an explicit request to that task when it's ready
-	(i.e. no other requests or interrupts are outstanding).
-
-*/
-
-
-
-#define RV86_USTACK_SIZE 1024
-
-vm_offset_t rv86_ustack_pa;
-vm_offset_t rv86_return_int_pa;
-struct far_pointer_32 rv86_usp;
-struct far_pointer_16 rv86_rp;
-
-void rv86_real_int(int intnum, struct real_call_data *rcd)
-{
-	unsigned short old_tr;
-	unsigned int old_eflags;
-
-	/* If this is the first time this routine is being called,
-	   initialize the kernel stack.  */
-	if (!rv86_ustack_pa)
-	{
-		rv86_ustack_pa = 0xa0000 - RV86_USTACK_SIZE; /* XXX */
-
-		assert(rv86_ustack_pa < 0x100000);
-
-		/* Use the top two bytes of the ustack for an 'int $0xff' instruction.  */
-		rv86_return_int_pa = rv86_ustack_pa + RV86_USTACK_SIZE - 2;
-		*(short*)phystokv(rv86_return_int_pa) = 0xffcd;
-
-		/* Set up the v86 stack pointer.  */
-		rv86_usp.seg = rv86_rp.seg = rv86_ustack_pa >> 4;
-		rv86_usp.ofs = rv86_rp.ofs = (rv86_ustack_pa & 0xf) + RV86_USTACK_SIZE - 2;
-
-		/* Pre-allocate a real-mode interrupt stack frame.  */
-		rv86_usp.ofs -= 6;
-	}
-
-	/* Make sure interrupts are disabled.  */
-	old_eflags = get_eflags();
-
-	/* Switch to the TSS to use in v86 mode.  */
-	old_tr = get_tr();
-	cpu[0].tables.gdt[REAL_TSS_IDX].access &= ~ACC_TSS_BUSY;
-	set_tr(REAL_TSS);
-
-	asm volatile("
-		pushl	%%ebp
-		pushl	%%eax
-		call	rv86_real_int_asm
-		popl	%%eax
-		popl	%%ebp
-	" :
-	  : "a" (rcd), "S" (intnum)
-	  : "eax", "ebx", "ecx", "edx", "esi", "edi");
-
-	/* Switch to the original TSS.  */
-	cpu[0].tables.gdt[old_tr/8].access &= ~ACC_TSS_BUSY;
-	set_tr(old_tr);
-
-	/* Restore the original processor flags.  */
-	set_eflags(old_eflags);
-}
-
-void (*real_int)(int intnum, struct real_call_data *rcd) = rv86_real_int;
-
diff --git a/i386/pc/rv86/rv86_real_int_asm.S b/i386/pc/rv86/rv86_real_int_asm.S
deleted file mode 100644
index 54b1b9b..0000000
--- a/i386/pc/rv86/rv86_real_int_asm.S
+++ /dev/null
@@ -1,119 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/asm.h>
-#include <mach/machine/eflags.h>
-
-#include "trap.h"
-#include "i386_asm.h"
-#include "pc_asm.h"
-#include "trap_asm.h"
-
-	.text
-	.globl	rv86_real_int_asm
-rv86_real_int_asm:
-
-	/* Stash our protected-mode stack pointer.  */
-	movl	%esp,EXT(real_tss)+TSS_ESP0
-
-	/* Load the linear/physical-address data segment into ES,
-	   for easy access to real-mode memory.  */
-	movl	$LINEAR_DS,%edx
-	movw	%dx,%es
-
-	/* Find the physical address of the real-mode interrupt stack (es:ebx).
-	   A 6-byte stack frame has already been allocated on it.  */
-	movl	EXT(rv86_usp)+4,%ebx
-	shll	$4,%ebx
-	addl	EXT(rv86_usp),%ebx
-
-	/* Store the magic return pointer into the real-mode interrupt stack frame.  */
-	movl	EXT(rv86_rp),%edx
-	movl	%edx,%es:(%ebx)
-	movw	RCD_FLAGS(%eax),%dx
-	movw	%dx,%es:4(%ebx)
-
-	/* Find the address of the real mode interrupt vector (es:esi).  */
-	shll	$2,%esi
-
-	/* Build the v86 trap frame.  */
-	xorl	%edx,%edx
-	movw	RCD_GS(%eax),%dx
-	pushl	%edx
-	movw	RCD_FS(%eax),%dx
-	pushl	%edx
-	movw	RCD_DS(%eax),%dx
-	pushl	%edx
-	movw	RCD_ES(%eax),%dx
-	pushl	%edx
-	pushl	EXT(rv86_usp)+4
-	pushl	EXT(rv86_usp)
-	movl	$EFL_VM+EFL_IOPL_USER,%ecx
-	orw	RCD_FLAGS(%eax),%cx
-	andl	$-1-EFL_IF-EFL_TF,%ecx
-	pushl	%ecx
-	movw	%es:2(%esi),%edx
-	pushl	%edx
-	movw	%es:(%esi),%edx
-	pushl	%edx
-
-	/* Load the requested register state.  */
-	movl	RCD_EDI(%eax),%edi
-	movl	RCD_ESI(%eax),%esi
-	movl	RCD_EBP(%eax),%ebp
-	movl	RCD_EBX(%eax),%ebx
-	movl	RCD_EDX(%eax),%edx
-	movl	RCD_ECX(%eax),%ecx
-	movl	RCD_EAX(%eax),%eax
-
-	/* Drop into v86 mode.  */
-	iret
-
-ENTRY(rv86_return)
-
-	/* Restore the kernel segment registers.  */
-	movw	%ss,%ax
-	movw	%ax,%ds
-	movw	%ax,%es
-
-	/* Retrieve the real_call_data pointer from rv86_real_int_asm's stack frame.  */
-	movl	TR_V86SIZE+4(%esp),%eax
-
-	/* Stash the final register state.  */
-	movl	TR_EDI(%esp),%edx;	movl	%edx,RCD_EDI(%eax)
-	movl	TR_ESI(%esp),%edx;	movl	%edx,RCD_ESI(%eax)
-	movl	TR_EBP(%esp),%edx;	movl	%edx,RCD_EBP(%eax)
-	movl	TR_EBX(%esp),%edx;	movl	%edx,RCD_EBX(%eax)
-	movl	TR_EDX(%esp),%edx;	movl	%edx,RCD_EDX(%eax)
-	movl	TR_ECX(%esp),%edx;	movl	%edx,RCD_ECX(%eax)
-	movl	TR_EAX(%esp),%edx;	movl	%edx,RCD_EAX(%eax)
-	movl	TR_EFLAGS(%esp),%edx;	movw	%dx,RCD_FLAGS(%eax)
-	movl	TR_V86_ES(%esp),%edx;	movw	%dx,RCD_ES(%eax)
-	movl	TR_V86_DS(%esp),%edx;	movw	%dx,RCD_DS(%eax)
-	movl	TR_V86_FS(%esp),%edx;	movw	%dx,RCD_FS(%eax)
-	movl	TR_V86_GS(%esp),%edx;	movw	%dx,RCD_GS(%eax)
-
-	/* Return from the call to rv86_real_int_asm.  */
-	lea	TR_V86SIZE(%esp),%esp
-	ret
-
diff --git a/i386/pc/rv86/rv86_reflect_irq.S b/i386/pc/rv86/rv86_reflect_irq.S
deleted file mode 100644
index 5d68fae..0000000
--- a/i386/pc/rv86/rv86_reflect_irq.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/* 
- * Copyright (c) 1995 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/asm.h>
-#include <mach/machine/eflags.h>
-
-#include "trap.h"
-#include "trap_asm.h"
-#include "pc_asm.h"
-#include "i386_asm.h"
-
-/*
- * Define a set of interrupt handlers to reflect interrupts to v86 mode.
- */
-
-	.text
-
-#define master_base	0x08
-#define slave_base	0x70
-
-#define irq(pic,picnum,irqnum)				\
-ENTRY(rv86_reflect_irq##irqnum)				;\
-	pushl	$pic##_base+picnum			;\
-	pushl	$0x80000000+irqnum /* (for debug) */	;\
-	jmp	allintrs
-
-#include "irq_list.h"
-
-
-allintrs:
-	pusha
-	pushl	%ds
-	pushl	%es
-	pushl	%fs
-	pushl	%gs
-
-	/* Load the normal kernel segment registers.  */
-	movw	%ss,%ax
-	movw	%ax,%ds
-	movw	%ax,%es
-
-	/* See if we came from v86 mode.  */
-	testl	$EFL_VM,TR_EFLAGS(%esp)
-	jnz	int_from_v86
-
-	movl	TR_ERR(%esp),%eax
-	pushl	$dummy_rcd
-	pushl	%eax
-	call	EXT(rv86_real_int)
-	addl	$2*4,%esp
-
-	popl	%gs
-	popl	%fs
-	popl	%es
-	popl	%ds
-	popa
-	addl	$2*4,%esp
-	iret
-
-int_from_v86:
-
-	/* Save the v86 stack pointer before handling the interrupt.
-	   We need this in order to handle recursive reflected interrupts
-	   possibly interspersed with protected-mode interrupts.  */
-	movl	EXT(rv86_usp),%esi
-	movl	EXT(rv86_usp)+4,%edi
-	movl	EXT(real_tss)+TSS_ESP0,%ebx
-
-	movl	TR_ESP(%esp),%eax
-	subw	$6,%ax	/* allocate a real-mode interrupt stack frame.  */
-	movl	%eax,EXT(rv86_usp)
-	movl	TR_SS(%esp),%eax
-	movw	%ax,EXT(rv86_usp)+4
-
-	movl	TR_ERR(%esp),%eax
-	pushl	$dummy_rcd
-	pushl	%eax
-	call	EXT(rv86_real_int)
-	addl	$2*4,%esp
-
-	movl	%esi,EXT(rv86_usp)
-	movl	%edi,EXT(rv86_usp)+4
-	movl	%ebx,EXT(real_tss)+TSS_ESP0
-
-	addl	$4*4,%esp
-	popa
-	addl	$2*4,%esp
-	iret
-
-	/* Dummy real_call_data structure (always all zero)
-	   to use when reflecting hardware interrupts.  */
-	.comm	dummy_rcd,RCD_SIZE
-
diff --git a/i386/pc/rv86/rv86_trap_handler.S b/i386/pc/rv86/rv86_trap_handler.S
deleted file mode 100644
index 793f6b6..0000000
--- a/i386/pc/rv86/rv86_trap_handler.S
+++ /dev/null
@@ -1,167 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/asm.h>
-#include <mach/machine/eflags.h>
-
-#include "i386_asm.h"
-#include "trap.h"
-#include "trap_asm.h"
-
-	.text
-
-ENTRY(rv86_trap_handler)
-	cmpl	$T_GENERAL_PROTECTION,TR_TRAPNO(%esp)
-	jz	gpf_from_v86
-
-	UNEXPECTED_TRAP
-
-gpf_from_v86:
-
-	/* Load the linear/physical-address data segment,
-	   for easy access to real-mode memory.  */
-	movl	$LINEAR_DS,%eax
-	movw	%ax,%ds
-
-	/* Find the physical address of the trapping instruction (ebx).  */
-	movzwl	TR_CS(%esp),%ebx
-	shll	$4,%ebx
-	addl	TR_EIP(%esp),%ebx
-
-	/* See if we're just trying to get out of v86 mode.  */
-	cmpl	%ss:EXT(rv86_return_int_pa),%ebx
-	je	EXT(rv86_return)
-
-	/* Check the instruction (al).  */
-	movb	(%ebx),%al
-	cmpb	$0xcd,%al
-	je	gpf_int_n
-
-	UNEXPECTED_TRAP
-
-
-gpf_int_n:
-
-	/* Bump the ip past the int instruction.  */
-	addw	$2,TR_EIP(%esp)
-
-	/* Find the real mode interrupt vector number (esi).  */
-	movzbl	1(%ebx),%esi
-
-	/* See if it's a copy-extended-memory interrupt request;
-	   if so, just handle it here.  */
-	cmpl	$0x15,%esi
-	jne	1f
-	cmpb	$0x87,TR_EAX+1(%esp)
-	je	copy_ext_mem
-1:
-
-	/* XXX The stuff down here is essentially the same as in moss.  */
-
-reflect_v86_intr:
-
-	/* Find the address of the real mode interrupt vector (esi).  */
-	shll	$2,%esi
-
-	/* Make room for the real-mode interrupt stack frame.  */
-	subw	$6,TR_ESP(%esp)
-
-	/* Find the physical address of the v86 stack (ebx).  */
-	movzwl	TR_SS(%esp),%ebx
-	shll	$4,%ebx
-	addl	TR_ESP(%esp),%ebx
-
-	/* Store the return information into the v86 stack frame.  */
-	movl	TR_EIP(%esp),%eax
-	movw	%ax,(%ebx)
-	movl	TR_CS(%esp),%eax
-	movw	%ax,2(%ebx)
-	movl	TR_EFLAGS(%esp),%eax
-	movw	%ax,4(%ebx)
-
-	/* Find the real-mode interrupt vector to invoke,
-	   and set up the real_call_thread's kernel stack frame
-	   to point to it.  */
-	movl	(%esi),%eax
-	movw	%ax,TR_EIP(%esp)
-	shrl	$16,%eax
-	movw	%ax,TR_CS(%esp)
-	andl	$-1-EFL_IF-EFL_TF,TR_EFLAGS(%esp)
-
-	/* Restore saved state and return.  */
-	addl	$4*4,%esp
-	popa
-	addl	$4*2,%esp
-	iret
-
-
-
-/* We intercepted a copy-extended-memory software interrupt
-   (int 0x15 function 0x87).
-   This is used by HIMEM.SYS, for example, to manage extended memory.
-   The BIOS's routine isn't going to work in v86 mode,
-   so do it ourselves.  */
-copy_ext_mem:
-
-	/* Find the parameter block provided by the caller (ebx).  */
-	movzwl	TR_V86_ES(%esp),%ebx
-	movzwl	TR_ESI(%esp),%eax
-	shll	$4,%ebx
-	addl	%eax,%ebx
-
-	/* Source address (esi).  */
-	movl	0x12(%ebx),%esi
-	andl	$0x00ffffff,%esi
-
-	/* Destination address (edi).  */
-	movl	0x1a(%ebx),%edi
-	andl	$0x00ffffff,%edi
-
-	/* Number of bytes (ecx).  */
-	movzwl	TR_ECX(%esp),%ecx
-	addl	%ecx,%ecx
-
-	/* Use the standard i386 bcopy routine to copy the data.
-	   This assumes it's "friendly" in its use of segment registers
-	   (i.e. always uses ss for stack data and ds/es for the data to copy).
-	   The bcopy is simple enough that this should always be true.  */
-	movw	%ds,%ax
-	movw	%ax,%es
-	cld
-	pushl	%ecx
-	pushl	%edi
-	pushl	%esi
-	call	EXT(bcopy)
-	addl	$3*4,%esp
-
-	/* Clear the carry flag to indicate that the copy was successful.
-	   AH is also cleared, below.  */
-	andl	$-1-EFL_CF,TR_EFLAGS(%esp)
-
-	/* Restore saved state and return.  */
-	addl	$4*4,%esp
-	popa
-	xorb	%ah,%ah
-	addl	$4*2,%esp
-	iret
-
diff --git a/i386/pc/rv86/trap_handler.S b/i386/pc/rv86/trap_handler.S
deleted file mode 100644
index 99254ee..0000000
--- a/i386/pc/rv86/trap_handler.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* 
- * Copyright (c) 1995-1994 The University of Utah and
- * the Computer Systems Laboratory at the University of Utah (CSL).
- * All rights reserved.
- *
- * Permission to use, copy, modify and distribute this software is hereby
- * granted provided that (1) source code retains these copyright, permission,
- * and disclaimer notices, and (2) redistributions including binaries
- * reproduce the notices in supporting documentation, and (3) all advertising
- * materials mentioning features or use of this software display the following
- * acknowledgement: ``This product includes software developed by the
- * Computer Systems Laboratory at the University of Utah.''
- *
- * THE UNIVERSITY OF UTAH AND CSL ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS
- * IS" CONDITION.  THE UNIVERSITY OF UTAH AND CSL DISCLAIM ANY LIABILITY OF
- * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- *
- * CSL requests users of this software to return to csl-dist@cs.utah.edu any
- * improvements that they make and grant CSL redistribution rights.
- *
- *      Author: Bryan Ford, University of Utah CSL
- */
-
-#include <mach/machine/asm.h>
-#include <mach/machine/eflags.h>
-
-#include "trap.h"
-#include "trap_asm.h"
-
-	.text
-
-ENTRY(trap_handler)
-
-	/* See if we came from v86 mode.  */
-	testl	$EFL_VM,TR_EFLAGS(%esp)
-	jnz	EXT(rv86_trap_handler)
-
-	UNEXPECTED_TRAP
-