summaryrefslogtreecommitdiff
path: root/i386/linux
diff options
context:
space:
mode:
authorThomas Schwinge <tschwinge@gnu.org>2006-10-07 13:24:35 +0000
committerThomas Schwinge <tschwinge@gnu.org>2009-06-18 00:26:42 +0200
commitb3e1f60908fd432ff978adf4a787e7940c53c0bf (patch)
treeb9fa46ed00abe062cff3279fba74a1f05af4cdc7 /i386/linux
parentfdb3a486fff2196f43944019d89afb58c47ecaa8 (diff)
2006-10-07 Thomas Schwinge <tschwinge@gnu.org>
* i386/linux/configure: Regernerate. * i386/linux/device-drivers.h.in: Likewise.
Diffstat (limited to 'i386/linux')
-rwxr-xr-xi386/linux/configure820
-rw-r--r--i386/linux/device-drivers.h.in230
2 files changed, 603 insertions, 447 deletions
diff --git a/i386/linux/configure b/i386/linux/configure
index 7248e58..b4c526f 100755
--- a/i386/linux/configure
+++ b/i386/linux/configure
@@ -796,156 +796,183 @@ Optional Features:
disabled and would otherwise have been enabled by
default; then use the `--enable-*' options to enable
only those you actually want to have enabled
- --disable-floppy disable driver PC floppy
- --disable-ide disable driver IDE disks
- --disable-advansys disable driver SCSI controller AdvanSys
- --disable-BusLogic disable driver SCSI controller BusLogic
+ --disable-floppy disable device driver for PC floppy
+ --disable-ide disable device driver for IDE disks
+ --disable-advansys disable device driver for SCSI controller AdvanSys
+ --disable-BusLogic disable device driver for SCSI controller BusLogic
--enable-flashpoint enable SCSI flashpoint
- --disable-u1434f disable driver SCSI controller UltraStor 14F/34F
- --disable-ultrastor disable driver SCSI controller UltraStor
- --disable-aha152x disable driver SCSI controller Adaptec AHA-152x/2825
- (aha152x, aha2825)
- --disable-aha1542 disable driver SCSI controller Adaptec AHA-1542
- --disable-aha1740 disable driver SCSI controller Adaptec AHA-1740
- --disable-aic7xxx disable driver SCSI controller Adaptec AIC7xxx
- --disable-fdomain disable driver SCSI controller Future Domain 16xx
- --disable-in2000 disable driver SCSI controller Always IN 2000
- --enable-g_NCR5380 enable driver SCSI controller Generic NCR5380/53c400
- (ncr5380, ncr53c400)
- --enable-NCR53c406a enable driver SCSI controller NCR53c406a chip
- --disable-pas16 disable driver SCSI controller PAS16
- --disable-seagate disable driver SCSI controller Seagate ST02, Future
- Domain TMC-8xx
- --disable-t128 disable driver SCSI controller Trantor
+ --disable-u14-34f disable device driver for SCSI controller UltraStor
+ 14F/34F
+ --disable-ultrastor disable device driver for SCSI controller UltraStor
+ --disable-aha152x disable device driver for SCSI controller Adaptec
+ AHA-152x/2825 (aha152x, aha2825)
+ --disable-aha1542 disable device driver for SCSI controller Adaptec
+ AHA-1542
+ --disable-aha1740 disable device driver for SCSI controller Adaptec
+ AHA-1740
+ --disable-aic7xxx disable device driver for SCSI controller Adaptec
+ AIC7xxx
+ --disable-fdomain disable device driver for SCSI controller Future
+ Domain 16xx
+ --disable-in2000 disable device driver for SCSI controller Always IN
+ 2000
+ --enable-g_NCR5380 enable device driver for SCSI controller Generic
+ NCR5380/53c400 (ncr5380, ncr53c400)
+ --enable-NCR53c406a enable device driver for SCSI controller NCR53c406a
+ chip
+ --disable-pas16 disable device driver for SCSI controller PAS16
+ --disable-seagate disable device driver for SCSI controller Seagate
+ ST02, Future Domain TMC-8xx
+ --disable-t128 disable device driver for SCSI controller Trantor
T128/T128F/T228 (t128, t128f, t228)
- --disable-53c78xx disable driver SCSI controller NCR 53C7,8xx
- --enable-eata_dma enable driver SCSI controller EATA-DMA (DPT, NEC,
- AT&T, SNI, AST, Olivetti, Alphatronix)
- --disable-eata_pio disable driver SCSI controller EATA-PIO (old DPT
- PM2001, PM2012A)
- --disable-wd7000 disable driver SCSI controller WD 7000
- --disable-eata disable driver SCSI controller EATA ISA/EISA/PCI
- (DPT and generic EATA/DMA-compliant boards)
- --disable-AM53C974 disable driver SCSI controller AM53/79C974
- (am53c974, am79c974)
- --disable-dtc disable driver SCSI controller DTC3180/3280
- (dtc3180, dtc3280)
- --disable-ncr53c8xx disable driver SCSI controller NCR53C8XX (ncr53c8xx,
- dc390f, dc390u, dc390w)
- --disable-tmscsim disable driver SCSI controller Tekram DC-390(T)
- (dc390, dc390t)
- --disable-ppa disable driver IOMEGA Parallel Port ZIP drive
- --disable-qlogicfas disable driver SCSI controller Qlogic FAS
- --disable-qlogicisp disable driver SCSI controller Qlogic ISP
- --disable-gdth disable driver GDT SCSI Disk Array Controller
- --disable-ne disable driver Ethernet controller NE2000/NE1000 ISA
- (ne, ne1000, ne2000)
- --disable-3c503 disable driver Ethernet controller 3Com 503 (3c503)
- / Etherlink II
- --disable-3c509 disable driver Ethernet controller 3Com 509/579
- (3c509, 3c579) / Etherlink III
- --disable-wd disable driver Ethernet controller WD80x3
- --disable-3c501 disable driver Ethernet controller 3COM 501 (3c501)
- / Etherlink I
- --disable-smcultra disable driver Ethernet controller SMC Ultra
- --disable-smcultra32 disable driver Ethernet controller SMC Ultra32
- --disable-hpplus disable driver Ethernet controller HP PCLAN+ (27247B
- and 27252A)
- --disable-hp disable driver Ethernet controller HP PCLAN (27245
- and other 27xxx series)
- --disable-3c59x disable driver Ethernet controller 3Com 59x/90x
- (3c59x, 3c590, 3c592, 3c595, 3c597, 3c90x, 3c900,
- 3c905) "Vortex/Boomerang"
- --disable-seeq8005 disable driver Ethernet controller Seeq8005
- --disable-hp100 disable driver Ethernet controller HP 10/100VG PCLAN
- (ISA, EISA, PCI) (hp100, hpj2577, hpj2573, hpj2585,
- hp27248b)
- --disable-ac3200 disable driver Ethernet controller Ansel
+ --disable-53c78xx disable device driver for SCSI controller NCR
+ 53C7,8xx
+ --enable-eata_dma enable device driver for SCSI controller EATA-DMA
+ (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix)
+ --disable-eata_pio disable device driver for SCSI controller EATA-PIO
+ (old DPT PM2001, PM2012A)
+ --disable-wd7000 disable device driver for SCSI controller WD 7000
+ --disable-eata disable device driver for SCSI controller EATA
+ ISA/EISA/PCI (DPT and generic EATA/DMA-compliant
+ boards)
+ --disable-AM53C974 disable device driver for SCSI controller
+ AM53/79C974 (am53c974, am79c974)
+ --disable-dtc disable device driver for SCSI controller
+ DTC3180/3280 (dtc3180, dtc3280)
+ --disable-ncr53c8xx disable device driver for SCSI controller NCR53C8XX
+ (ncr53c8xx, dc390f, dc390u, dc390w)
+ --disable-tmscsim disable device driver for SCSI controller Tekram
+ DC-390(T) (dc390, dc390t)
+ --disable-ppa disable device driver for IOMEGA Parallel Port ZIP
+ drive
+ --disable-qlogicfas disable device driver for SCSI controller Qlogic FAS
+ --disable-qlogicisp disable device driver for SCSI controller Qlogic ISP
+ --disable-gdth disable device driver for GDT SCSI Disk Array
+ Controller
+ --disable-ne disable device driver for Ethernet controller
+ NE2000/NE1000 ISA (ne, ne1000, ne2000)
+ --disable-3c503 disable device driver for Ethernet controller 3Com
+ 503 (3c503) / Etherlink II
+ --disable-3c509 disable device driver for Ethernet controller 3Com
+ 509/579 (3c509, 3c579) / Etherlink III
+ --disable-wd disable device driver for Ethernet controller WD80x3
+ --disable-3c501 disable device driver for Ethernet controller 3COM
+ 501 (3c501) / Etherlink I
+ --disable-smc-ultra disable device driver for Ethernet controller SMC
+ Ultra
+ --disable-smc-ultra32 disable device driver for Ethernet controller SMC
+ Ultra32
+ --disable-hp-plus disable device driver for Ethernet controller HP
+ PCLAN+ (27247B and 27252A)
+ --disable-hp disable device driver for Ethernet controller HP
+ PCLAN (27245 and other 27xxx series)
+ --disable-3c59x disable device driver for Ethernet controller 3Com
+ 59x/90x (3c59x, 3c590, 3c592, 3c595, 3c597, 3c90x,
+ 3c900, 3c905) "Vortex/Boomerang"
+ --disable-seeq8005 disable device driver for Ethernet controller
+ Seeq8005
+ --disable-hp100 disable device driver for Ethernet controller HP
+ 10/100VG PCLAN (ISA, EISA, PCI) (hp100, hpj2577,
+ hpj2573, hpj2585, hp27248b)
+ --disable-ac3200 disable device driver for Ethernet controller Ansel
Communications EISA 3200
- --disable-e2100 disable driver Ethernet controller Cabletron E21xx
- --disable-at1700 disable driver Ethernet controller AT1700 (Fujitsu
- 86965)
- --disable-eth16i disable driver Ethernet controller ICL EtherTeam
- 16i/32 (eth16i, eth32)
- --disable-znet disable driver Ethernet controller Zenith Z-Note
- (znet, znote)
- --disable-eexpress disable driver Ethernet controller EtherExpress 16
- --disable-eepro disable driver Ethernet controller EtherExpressPro
- --disable-eepro100 disable driver Ethernet controller Intel
+ --disable-e2100 disable device driver for Ethernet controller
+ Cabletron E21xx
+ --disable-at1700 disable device driver for Ethernet controller AT1700
+ (Fujitsu 86965)
+ --disable-eth16i disable device driver for Ethernet controller ICL
+ EtherTeam 16i/32 (eth16i, eth32)
+ --disable-znet disable device driver for Ethernet controller Zenith
+ Z-Note (znet, znote)
+ --disable-eexpress disable device driver for Ethernet controller
+ EtherExpress 16
+ --disable-eepro disable device driver for Ethernet controller
+ EtherExpressPro
+ --disable-eepro100 disable device driver for Ethernet controller Intel
EtherExpressPro PCI 10+/100B/100+
- --disable-depca disable driver Ethernet controller DEPCA (de100,
- de101, de200, de201, de202, de210, de422)
- --disable-ewrk3 disable driver Ethernet controller EtherWORKS 3
- (ewrk3, de203, de204, de205)
- --disable-de4x5 disable driver Ethernet controller DE4x5 (de4x5,
- de425, de434, de435, de450, de500)
- --disable-apricot disable driver Ethernet controller Apricot XEN-II on
- board ethernet
- --enable-wavelan enable driver Ethernet controller AT&T WaveLAN & DEC
- RoamAbout DS
- --disable-3c507 disable driver Ethernet controller 3Com 507 (3c507,
- el16)
- --disable-3c505 disable driver Ethernet controller 3Com 505 (3c505,
- elplus)
- --disable-de600 disable driver Ethernet controller D-Link DE-600
- --disable-de620 disable driver Ethernet controller D-Link DE-620
- --disable-sk_g16 disable driver Ethernet controller Schneider & Koch
- G16
- --disable-ni52 disable driver Ethernet controller NI5210
- --disable-ni65 disable driver Ethernet controller NI6510
- --enable-atp enable driver Ethernet controller AT-LAN-TEC/RealTek
- pocket adaptor
- --disable-lance disable driver Ethernet controller AMD LANCE and
- PCnet (at1500, ne2100)
- --disable-tulip disable driver Ethernet controller DECchip Tulip
- (dc21x4x) PCI (elcp, tulip)
- --disable-fmv18x disable driver Ethernet controller
+ --disable-depca disable device driver for Ethernet controller DEPCA
+ (de100, de101, de200, de201, de202, de210, de422)
+ --disable-ewrk3 disable device driver for Ethernet controller
+ EtherWORKS 3 (ewrk3, de203, de204, de205)
+ --disable-de4x5 disable device driver for Ethernet controller DE4x5
+ (de4x5, de425, de434, de435, de450, de500)
+ --disable-apricot disable device driver for Ethernet controller
+ Apricot XEN-II on board ethernet
+ --enable-wavelan enable device driver for Ethernet controller AT&T
+ WaveLAN & DEC RoamAbout DS
+ --disable-3c507 disable device driver for Ethernet controller 3Com
+ 507 (3c507, el16)
+ --disable-3c505 disable device driver for Ethernet controller 3Com
+ 505 (3c505, elplus)
+ --disable-de600 disable device driver for Ethernet controller D-Link
+ DE-600
+ --disable-de620 disable device driver for Ethernet controller D-Link
+ DE-620
+ --disable-sk_g16 disable device driver for Ethernet controller
+ Schneider & Koch G16
+ --disable-ni52 disable device driver for Ethernet controller NI5210
+ --disable-ni65 disable device driver for Ethernet controller NI6510
+ --enable-atp enable device driver for Ethernet controller
+ AT-LAN-TEC/RealTek pocket adaptor
+ --disable-lance disable device driver for Ethernet controller AMD
+ LANCE and PCnet (at1500, ne2100)
+ --disable-tulip disable device driver for Ethernet controller
+ DECchip Tulip (dc21x4x) PCI (elcp, tulip)
+ --disable-fmv18x disable device driver for Ethernet controller
FMV-181/182/183/184
- --disable-3c515 disable driver Ethernet controller 3Com 515 ISA Fast
- EtherLink
- --disable-pcnet32 disable driver Ethernet controller AMD PCI PCnet32
- (PCI bus NE2100 cards)
- --disable-ne2kpci disable driver Ethernet controller PCI NE2000
- --disable-yellowfin disable driver Ethernet controller Packet Engines
- Yellowfin Gigabit-NIC
- --disable-rtl8139 disable driver Ethernet controller RealTek 8129/8139
- (rtl8129, rtl8139) (not 8019/8029!)
- --disable-epic100 disable driver Ethernet controller SMC 83c170/175
- EPIC/100 (epic, epic100) / EtherPower II
- --disable-tlan disable driver Ethernet controller TI ThunderLAN
- --disable-viarhine disable driver Ethernet controller VIA Rhine
- --disable-hamachi disable driver Ethernet controller Packet Engines
- "Hamachi" GNIC-2 Gigabit Ethernet
- --disable-intelgige disable driver Ethernet controller Intel PCI Gigabit
- Ethernet
- --disable-myson803 disable driver Ethernet controller Myson MTD803
- Ethernet adapter series
- --disable-natsemi disable driver Ethernet controller National
- Semiconductor DP8381x series PCI Ethernet
- --disable-ns820 disable driver Ethernet controller National
- Semiconductor DP8382x series PCI Ethernet
- --disable-starfire disable driver Ethernet controller Adaptec Starfire
- network adapter
- --disable-sundance disable driver Ethernet controller Sundance ST201
- "Alta" PCI Ethernet
- --disable-winbond840 disable driver Ethernet controller Winbond W89c840
- PCI Ethernet
- --disable-i82365 disable driver Intel 82365 PC Card controller
- --disable-pcmcia-isa disable isa-bus-support (pcmcia core)
- --disable-3c574_cs disable driver 3Com 3c574 ``RoadRunner'' PCMCIA
- Ethernet
- --disable-3c589_cs disable driver 3Com 3c589 PCMCIA Ethernet card
- --disable-axnet_cs disable driver Asix AX88190-based PCMCIA Ethernet
- adapters
- --disable-fmvj18x_cs disable driver fmvj18x chipset based PCMCIA Ethernet
+ --disable-3c515 disable device driver for Ethernet controller 3Com
+ 515 ISA Fast EtherLink
+ --disable-pcnet32 disable device driver for Ethernet controller AMD
+ PCI PCnet32 (PCI bus NE2100 cards)
+ --disable-ne2k-pci disable device driver for Ethernet controller PCI
+ NE2000
+ --disable-yellowfin disable device driver for Ethernet controller Packet
+ Engines Yellowfin Gigabit-NIC
+ --disable-rtl8139 disable device driver for Ethernet controller
+ RealTek 8129/8139 (rtl8129, rtl8139) (not
+ 8019/8029!)
+ --disable-epic100 disable device driver for Ethernet controller SMC
+ 83c170/175 EPIC/100 (epic, epic100) / EtherPower II
+ --disable-tlan disable device driver for Ethernet controller TI
+ ThunderLAN
+ --disable-via-rhine disable device driver for Ethernet controller VIA
+ Rhine
+ --disable-hamachi disable device driver for Ethernet controller Packet
+ Engines "Hamachi" GNIC-2 Gigabit Ethernet
+ --disable-intel-gige disable device driver for Ethernet controller Intel
+ PCI Gigabit Ethernet
+ --disable-myson803 disable device driver for Ethernet controller Myson
+ MTD803 Ethernet adapter series
+ --disable-natsemi disable device driver for Ethernet controller
+ National Semiconductor DP8381x series PCI Ethernet
+ --disable-ns820 disable device driver for Ethernet controller
+ National Semiconductor DP8382x series PCI Ethernet
+ --disable-starfire disable device driver for Ethernet controller
+ Adaptec Starfire network adapter
+ --disable-sundance disable device driver for Ethernet controller
+ Sundance ST201 "Alta" PCI Ethernet
+ --disable-winbond-840 disable device driver for Ethernet controller
+ Winbond W89c840 PCI Ethernet
+ --disable-i82365 disable device driver for Intel 82365 PC Card
+ controller
+ --disable-pcmcia-isa disable option isa bus support in the pcmcia core
+ --disable-3c574_cs disable device driver for 3Com 3c574 ``RoadRunner''
+ PCMCIA Ethernet
+ --disable-3c589_cs disable device driver for 3Com 3c589 PCMCIA Ethernet
+ card
+ --disable-axnet_cs disable device driver for Asix AX88190-based PCMCIA
+ Ethernet adapters
+ --disable-fmvj18x_cs disable device driver for fmvj18x chipset based
+ PCMCIA Ethernet cards
+ --disable-nmclan_cs disable device driver for New Media Ethernet LAN
+ PCMCIA cards
+ --disable-pcnet_cs disable device driver for NS8390-based PCMCIA cards
+ --disable-smc91c92_cs disable device driver for SMC91c92-based PCMCIA
cards
- --disable-nmclan_cs disable driver New Media Ethernet LAN PCMCIA cards
- --disable-pcnet_cs disable driver NS8390-based PCMCIA cards
- --disable-smc91c92_cs disable driver SMC91c92-based PCMCIA cards
- --disable-xirc2ps_cs disable driver Xircom CreditCard and Realport PCMCIA
- ethernet
- --disable-orinoco_cs disable driver Hermes or Prism 2 PCMCIA Wireless
- adapters (Orinoco)
+ --disable-xirc2ps_cs disable device driver for Xircom CreditCard and
+ Realport PCMCIA ethernet
+ --disable-orinoco_cs disable device driver for Hermes or Prism 2 PCMCIA
+ Wireless adapters (Orinoco)
Report bugs to <bug-hurd@gnu.org>.
_ACEOF
@@ -1620,13 +1647,14 @@ driver_class_wireless_files=""
+unset enableval
# Check whether --enable-floppy or --disable-floppy was given.
if test "${enable_floppy+set}" = set; then
enableval="$enable_floppy"
fi;
-enable_floppy=${enable_floppy-$enable_default_device_drivers}
-if test x"$enable_floppy" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_BLK_DEV_FD 1
@@ -1643,13 +1671,14 @@ _ACEOF
fi
fi
+unset enableval
# Check whether --enable-ide or --disable-ide was given.
if test "${enable_ide+set}" = set; then
enableval="$enable_ide"
fi;
-enable_ide=${enable_ide-$enable_default_device_drivers}
-if test x"$enable_ide" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_BLK_DEV_IDE 1
@@ -1670,13 +1699,14 @@ fi
+unset enableval
# Check whether --enable-advansys or --disable-advansys was given.
if test "${enable_advansys+set}" = set; then
enableval="$enable_advansys"
fi;
-enable_advansys=${enable_advansys-$enable_default_device_drivers}
-if test x"$enable_advansys" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_ADVANSYS 1
@@ -1695,13 +1725,14 @@ fi
+unset enableval
# Check whether --enable-BusLogic or --disable-BusLogic was given.
if test "${enable_BusLogic+set}" = set; then
enableval="$enable_BusLogic"
fi;
-enable_BusLogic=${enable_BusLogic-$enable_default_device_drivers}
-if test x"$enable_BusLogic" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_BUSLOGIC 1
@@ -1731,13 +1762,14 @@ _ACEOF
fi;
-# Check whether --enable-u1434f or --disable-u1434f was given.
-if test "${enable_u1434f+set}" = set; then
- enableval="$enable_u1434f"
+unset enableval
+# Check whether --enable-u14-34f or --disable-u14-34f was given.
+if test "${enable_u14_34f+set}" = set; then
+ enableval="$enable_u14_34f"
fi;
-enable_u1434f=${enable_u1434f-$enable_default_device_drivers}
-if test x"$enable_u1434f" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_U14_34F 1
@@ -1756,13 +1788,14 @@ fi
+unset enableval
# Check whether --enable-ultrastor or --disable-ultrastor was given.
if test "${enable_ultrastor+set}" = set; then
enableval="$enable_ultrastor"
fi;
-enable_ultrastor=${enable_ultrastor-$enable_default_device_drivers}
-if test x"$enable_ultrastor" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_ULTRASTOR 1
@@ -1781,13 +1814,14 @@ fi
+unset enableval
# Check whether --enable-aha152x or --disable-aha152x was given.
if test "${enable_aha152x+set}" = set; then
enableval="$enable_aha152x"
fi;
-enable_aha152x=${enable_aha152x-$enable_default_device_drivers}
-if test x"$enable_aha152x" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_AHA152X 1
@@ -1806,13 +1840,14 @@ fi
+unset enableval
# Check whether --enable-aha1542 or --disable-aha1542 was given.
if test "${enable_aha1542+set}" = set; then
enableval="$enable_aha1542"
fi;
-enable_aha1542=${enable_aha1542-$enable_default_device_drivers}
-if test x"$enable_aha1542" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_AHA1542 1
@@ -1831,13 +1866,14 @@ fi
+unset enableval
# Check whether --enable-aha1740 or --disable-aha1740 was given.
if test "${enable_aha1740+set}" = set; then
enableval="$enable_aha1740"
fi;
-enable_aha1740=${enable_aha1740-$enable_default_device_drivers}
-if test x"$enable_aha1740" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_AHA1740 1
@@ -1856,13 +1892,14 @@ fi
+unset enableval
# Check whether --enable-aic7xxx or --disable-aic7xxx was given.
if test "${enable_aic7xxx+set}" = set; then
enableval="$enable_aic7xxx"
fi;
-enable_aic7xxx=${enable_aic7xxx-$enable_default_device_drivers}
-if test x"$enable_aic7xxx" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_AIC7XXX 1
@@ -1881,13 +1918,14 @@ fi
+unset enableval
# Check whether --enable-fdomain or --disable-fdomain was given.
if test "${enable_fdomain+set}" = set; then
enableval="$enable_fdomain"
fi;
-enable_fdomain=${enable_fdomain-$enable_default_device_drivers}
-if test x"$enable_fdomain" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_FUTURE_DOMAIN 1
@@ -1906,13 +1944,14 @@ fi
+unset enableval
# Check whether --enable-in2000 or --disable-in2000 was given.
if test "${enable_in2000+set}" = set; then
enableval="$enable_in2000"
fi;
-enable_in2000=${enable_in2000-$enable_default_device_drivers}
-if test x"$enable_in2000" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_IN2000 1
@@ -1981,13 +2020,14 @@ fi;
+unset enableval
# Check whether --enable-pas16 or --disable-pas16 was given.
if test "${enable_pas16+set}" = set; then
enableval="$enable_pas16"
fi;
-enable_pas16=${enable_pas16-$enable_default_device_drivers}
-if test x"$enable_pas16" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_PASS16 1
@@ -2006,13 +2046,14 @@ fi
+unset enableval
# Check whether --enable-seagate or --disable-seagate was given.
if test "${enable_seagate+set}" = set; then
enableval="$enable_seagate"
fi;
-enable_seagate=${enable_seagate-$enable_default_device_drivers}
-if test x"$enable_seagate" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_SEAGATE 1
@@ -2031,13 +2072,14 @@ fi
+unset enableval
# Check whether --enable-t128 or --disable-t128 was given.
if test "${enable_t128+set}" = set; then
enableval="$enable_t128"
fi;
-enable_t128=${enable_t128-$enable_default_device_drivers}
-if test x"$enable_t128" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_T128 1
@@ -2056,13 +2098,14 @@ fi
+unset enableval
# Check whether --enable-53c78xx or --disable-53c78xx was given.
if test "${enable_53c78xx+set}" = set; then
enableval="$enable_53c78xx"
fi;
-enable_53c78xx=${enable_53c78xx-$enable_default_device_drivers}
-if test x"$enable_53c78xx" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_NCR53C7xx 1
@@ -2106,13 +2149,14 @@ fi;
+unset enableval
# Check whether --enable-eata_pio or --disable-eata_pio was given.
if test "${enable_eata_pio+set}" = set; then
enableval="$enable_eata_pio"
fi;
-enable_eata_pio=${enable_eata_pio-$enable_default_device_drivers}
-if test x"$enable_eata_pio" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_EATA_PIO 1
@@ -2131,13 +2175,14 @@ fi
+unset enableval
# Check whether --enable-wd7000 or --disable-wd7000 was given.
if test "${enable_wd7000+set}" = set; then
enableval="$enable_wd7000"
fi;
-enable_wd7000=${enable_wd7000-$enable_default_device_drivers}
-if test x"$enable_wd7000" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_7000FASST 1
@@ -2156,13 +2201,14 @@ fi
+unset enableval
# Check whether --enable-eata or --disable-eata was given.
if test "${enable_eata+set}" = set; then
enableval="$enable_eata"
fi;
-enable_eata=${enable_eata-$enable_default_device_drivers}
-if test x"$enable_eata" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_EATA 1
@@ -2181,13 +2227,14 @@ fi
+unset enableval
# Check whether --enable-AM53C974 or --disable-AM53C974 was given.
if test "${enable_AM53C974+set}" = set; then
enableval="$enable_AM53C974"
fi;
-enable_AM53C974=${enable_AM53C974-$enable_default_device_drivers}
-if test x"$enable_AM53C974" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_AM53C974 1
@@ -2206,13 +2253,14 @@ fi
+unset enableval
# Check whether --enable-dtc or --disable-dtc was given.
if test "${enable_dtc+set}" = set; then
enableval="$enable_dtc"
fi;
-enable_dtc=${enable_dtc-$enable_default_device_drivers}
-if test x"$enable_dtc" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_DTC3280 1
@@ -2231,13 +2279,14 @@ fi
+unset enableval
# Check whether --enable-ncr53c8xx or --disable-ncr53c8xx was given.
if test "${enable_ncr53c8xx+set}" = set; then
enableval="$enable_ncr53c8xx"
fi;
-enable_ncr53c8xx=${enable_ncr53c8xx-$enable_default_device_drivers}
-if test x"$enable_ncr53c8xx" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_NCR53C8XX 1
@@ -2256,13 +2305,14 @@ fi
+unset enableval
# Check whether --enable-tmscsim or --disable-tmscsim was given.
if test "${enable_tmscsim+set}" = set; then
enableval="$enable_tmscsim"
fi;
-enable_tmscsim=${enable_tmscsim-$enable_default_device_drivers}
-if test x"$enable_tmscsim" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_DC390T 1
@@ -2281,13 +2331,14 @@ fi
+unset enableval
# Check whether --enable-ppa or --disable-ppa was given.
if test "${enable_ppa+set}" = set; then
enableval="$enable_ppa"
fi;
-enable_ppa=${enable_ppa-$enable_default_device_drivers}
-if test x"$enable_ppa" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_PPA 1
@@ -2306,13 +2357,14 @@ fi
+unset enableval
# Check whether --enable-qlogicfas or --disable-qlogicfas was given.
if test "${enable_qlogicfas+set}" = set; then
enableval="$enable_qlogicfas"
fi;
-enable_qlogicfas=${enable_qlogicfas-$enable_default_device_drivers}
-if test x"$enable_qlogicfas" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_QLOGIC_FAS 1
@@ -2331,13 +2383,14 @@ fi
+unset enableval
# Check whether --enable-qlogicisp or --disable-qlogicisp was given.
if test "${enable_qlogicisp+set}" = set; then
enableval="$enable_qlogicisp"
fi;
-enable_qlogicisp=${enable_qlogicisp-$enable_default_device_drivers}
-if test x"$enable_qlogicisp" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_QLOGIC_ISP 1
@@ -2356,13 +2409,14 @@ fi
+unset enableval
# Check whether --enable-gdth or --disable-gdth was given.
if test "${enable_gdth+set}" = set; then
enableval="$enable_gdth"
fi;
-enable_gdth=${enable_gdth-$enable_default_device_drivers}
-if test x"$enable_gdth" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SCSI_GDTH 1
@@ -2383,13 +2437,14 @@ fi
+unset enableval
# Check whether --enable-ne or --disable-ne was given.
if test "${enable_ne+set}" = set; then
enableval="$enable_ne"
fi;
-enable_ne=${enable_ne-$enable_default_device_drivers}
-if test x"$enable_ne" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_NE2000 1
@@ -2406,13 +2461,14 @@ _ACEOF
fi
fi
+unset enableval
# Check whether --enable-3c503 or --disable-3c503 was given.
if test "${enable_3c503+set}" = set; then
enableval="$enable_3c503"
fi;
-enable_3c503=${enable_3c503-$enable_default_device_drivers}
-if test x"$enable_3c503" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EL2 1
@@ -2430,13 +2486,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-3c509 or --disable-3c509 was given.
if test "${enable_3c509+set}" = set; then
enableval="$enable_3c509"
fi;
-enable_3c509=${enable_3c509-$enable_default_device_drivers}
-if test x"$enable_3c509" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EL3 1
@@ -2454,13 +2511,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-wd or --disable-wd was given.
if test "${enable_wd+set}" = set; then
enableval="$enable_wd"
fi;
-enable_wd=${enable_wd-$enable_default_device_drivers}
-if test x"$enable_wd" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_WD80x3 1
@@ -2478,13 +2536,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-3c501 or --disable-3c501 was given.
if test "${enable_3c501+set}" = set; then
enableval="$enable_3c501"
fi;
-enable_3c501=${enable_3c501-$enable_default_device_drivers}
-if test x"$enable_3c501" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EL1 1
@@ -2502,13 +2561,14 @@ _ACEOF
fi
-# Check whether --enable-smcultra or --disable-smcultra was given.
-if test "${enable_smcultra+set}" = set; then
- enableval="$enable_smcultra"
+unset enableval
+# Check whether --enable-smc-ultra or --disable-smc-ultra was given.
+if test "${enable_smc_ultra+set}" = set; then
+ enableval="$enable_smc_ultra"
fi;
-enable_smcultra=${enable_smcultra-$enable_default_device_drivers}
-if test x"$enable_smcultra" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_ULTRA 1
@@ -2525,13 +2585,14 @@ _ACEOF
fi
fi
-# Check whether --enable-smcultra32 or --disable-smcultra32 was given.
-if test "${enable_smcultra32+set}" = set; then
- enableval="$enable_smcultra32"
+unset enableval
+# Check whether --enable-smc-ultra32 or --disable-smc-ultra32 was given.
+if test "${enable_smc_ultra32+set}" = set; then
+ enableval="$enable_smc_ultra32"
fi;
-enable_smcultra32=${enable_smcultra32-$enable_default_device_drivers}
-if test x"$enable_smcultra32" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_ULTRA32 1
@@ -2548,13 +2609,14 @@ _ACEOF
fi
fi
-# Check whether --enable-hpplus or --disable-hpplus was given.
-if test "${enable_hpplus+set}" = set; then
- enableval="$enable_hpplus"
+unset enableval
+# Check whether --enable-hp-plus or --disable-hp-plus was given.
+if test "${enable_hp_plus+set}" = set; then
+ enableval="$enable_hp_plus"
fi;
-enable_hpplus=${enable_hpplus-$enable_default_device_drivers}
-if test x"$enable_hpplus" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_HPLAN_PLUS 1
@@ -2571,13 +2633,14 @@ _ACEOF
fi
fi
+unset enableval
# Check whether --enable-hp or --disable-hp was given.
if test "${enable_hp+set}" = set; then
enableval="$enable_hp"
fi;
-enable_hp=${enable_hp-$enable_default_device_drivers}
-if test x"$enable_hp" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_HPLAN 1
@@ -2595,13 +2658,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-3c59x or --disable-3c59x was given.
if test "${enable_3c59x+set}" = set; then
enableval="$enable_3c59x"
fi;
-enable_3c59x=${enable_3c59x-$enable_default_device_drivers}
-if test x"$enable_3c59x" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_VORTEX 1
@@ -2620,13 +2684,14 @@ fi
+unset enableval
# Check whether --enable-seeq8005 or --disable-seeq8005 was given.
if test "${enable_seeq8005+set}" = set; then
enableval="$enable_seeq8005"
fi;
-enable_seeq8005=${enable_seeq8005-$enable_default_device_drivers}
-if test x"$enable_seeq8005" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SEEQ8005 1
@@ -2645,13 +2710,14 @@ fi
+unset enableval
# Check whether --enable-hp100 or --disable-hp100 was given.
if test "${enable_hp100+set}" = set; then
enableval="$enable_hp100"
fi;
-enable_hp100=${enable_hp100-$enable_default_device_drivers}
-if test x"$enable_hp100" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_HP100 1
@@ -2669,13 +2735,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-ac3200 or --disable-ac3200 was given.
if test "${enable_ac3200+set}" = set; then
enableval="$enable_ac3200"
fi;
-enable_ac3200=${enable_ac3200-$enable_default_device_drivers}
-if test x"$enable_ac3200" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_AC3200 1
@@ -2692,13 +2759,14 @@ _ACEOF
fi
fi
+unset enableval
# Check whether --enable-e2100 or --disable-e2100 was given.
if test "${enable_e2100+set}" = set; then
enableval="$enable_e2100"
fi;
-enable_e2100=${enable_e2100-$enable_default_device_drivers}
-if test x"$enable_e2100" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_E2100 1
@@ -2716,13 +2784,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-at1700 or --disable-at1700 was given.
if test "${enable_at1700+set}" = set; then
enableval="$enable_at1700"
fi;
-enable_at1700=${enable_at1700-$enable_default_device_drivers}
-if test x"$enable_at1700" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_AT1700 1
@@ -2741,13 +2810,14 @@ fi
+unset enableval
# Check whether --enable-eth16i or --disable-eth16i was given.
if test "${enable_eth16i+set}" = set; then
enableval="$enable_eth16i"
fi;
-enable_eth16i=${enable_eth16i-$enable_default_device_drivers}
-if test x"$enable_eth16i" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_ETH16I 1
@@ -2766,13 +2836,14 @@ fi
+unset enableval
# Check whether --enable-znet or --disable-znet was given.
if test "${enable_znet+set}" = set; then
enableval="$enable_znet"
fi;
-enable_znet=${enable_znet-$enable_default_device_drivers}
-if test x"$enable_znet" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_ZNET 1
@@ -2791,13 +2862,14 @@ fi
+unset enableval
# Check whether --enable-eexpress or --disable-eexpress was given.
if test "${enable_eexpress+set}" = set; then
enableval="$enable_eexpress"
fi;
-enable_eexpress=${enable_eexpress-$enable_default_device_drivers}
-if test x"$enable_eexpress" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EEXPRESS 1
@@ -2816,13 +2888,14 @@ fi
+unset enableval
# Check whether --enable-eepro or --disable-eepro was given.
if test "${enable_eepro+set}" = set; then
enableval="$enable_eepro"
fi;
-enable_eepro=${enable_eepro-$enable_default_device_drivers}
-if test x"$enable_eepro" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EEXPRESS_PRO 1
@@ -2841,13 +2914,14 @@ fi
+unset enableval
# Check whether --enable-eepro100 or --disable-eepro100 was given.
if test "${enable_eepro100+set}" = set; then
enableval="$enable_eepro100"
fi;
-enable_eepro100=${enable_eepro100-$enable_default_device_drivers}
-if test x"$enable_eepro100" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EEXPRESS_PRO100B 1
@@ -2866,13 +2940,14 @@ fi
+unset enableval
# Check whether --enable-depca or --disable-depca was given.
if test "${enable_depca+set}" = set; then
enableval="$enable_depca"
fi;
-enable_depca=${enable_depca-$enable_default_device_drivers}
-if test x"$enable_depca" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_DEPCA 1
@@ -2891,13 +2966,14 @@ fi
+unset enableval
# Check whether --enable-ewrk3 or --disable-ewrk3 was given.
if test "${enable_ewrk3+set}" = set; then
enableval="$enable_ewrk3"
fi;
-enable_ewrk3=${enable_ewrk3-$enable_default_device_drivers}
-if test x"$enable_ewrk3" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EWRK3 1
@@ -2916,13 +2992,14 @@ fi
+unset enableval
# Check whether --enable-de4x5 or --disable-de4x5 was given.
if test "${enable_de4x5+set}" = set; then
enableval="$enable_de4x5"
fi;
-enable_de4x5=${enable_de4x5-$enable_default_device_drivers}
-if test x"$enable_de4x5" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_DE4X5 1
@@ -2941,13 +3018,14 @@ fi
+unset enableval
# Check whether --enable-apricot or --disable-apricot was given.
if test "${enable_apricot+set}" = set; then
enableval="$enable_apricot"
fi;
-enable_apricot=${enable_apricot-$enable_default_device_drivers}
-if test x"$enable_apricot" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_APRICOT 1
@@ -2991,13 +3069,14 @@ fi;
+unset enableval
# Check whether --enable-3c507 or --disable-3c507 was given.
if test "${enable_3c507+set}" = set; then
enableval="$enable_3c507"
fi;
-enable_3c507=${enable_3c507-$enable_default_device_drivers}
-if test x"$enable_3c507" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EL16 1
@@ -3016,13 +3095,14 @@ fi
+unset enableval
# Check whether --enable-3c505 or --disable-3c505 was given.
if test "${enable_3c505+set}" = set; then
enableval="$enable_3c505"
fi;
-enable_3c505=${enable_3c505-$enable_default_device_drivers}
-if test x"$enable_3c505" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_ELPLUS 1
@@ -3041,13 +3121,14 @@ fi
+unset enableval
# Check whether --enable-de600 or --disable-de600 was given.
if test "${enable_de600+set}" = set; then
enableval="$enable_de600"
fi;
-enable_de600=${enable_de600-$enable_default_device_drivers}
-if test x"$enable_de600" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_DE600 1
@@ -3066,13 +3147,14 @@ fi
+unset enableval
# Check whether --enable-de620 or --disable-de620 was given.
if test "${enable_de620+set}" = set; then
enableval="$enable_de620"
fi;
-enable_de620=${enable_de620-$enable_default_device_drivers}
-if test x"$enable_de620" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_DE620 1
@@ -3091,13 +3173,14 @@ fi
+unset enableval
# Check whether --enable-sk_g16 or --disable-sk_g16 was given.
if test "${enable_sk_g16+set}" = set; then
enableval="$enable_sk_g16"
fi;
-enable_sk_g16=${enable_sk_g16-$enable_default_device_drivers}
-if test x"$enable_sk_g16" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SK_G16 1
@@ -3116,13 +3199,14 @@ fi
+unset enableval
# Check whether --enable-ni52 or --disable-ni52 was given.
if test "${enable_ni52+set}" = set; then
enableval="$enable_ni52"
fi;
-enable_ni52=${enable_ni52-$enable_default_device_drivers}
-if test x"$enable_ni52" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_NI52 1
@@ -3141,13 +3225,14 @@ fi
+unset enableval
# Check whether --enable-ni65 or --disable-ni65 was given.
if test "${enable_ni65+set}" = set; then
enableval="$enable_ni65"
fi;
-enable_ni65=${enable_ni65-$enable_default_device_drivers}
-if test x"$enable_ni65" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_NI65 1
@@ -3191,13 +3276,14 @@ fi;
+unset enableval
# Check whether --enable-lance or --disable-lance was given.
if test "${enable_lance+set}" = set; then
enableval="$enable_lance"
fi;
-enable_lance=${enable_lance-$enable_default_device_drivers}
-if test x"$enable_lance" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_LANCE 1
@@ -3216,13 +3302,14 @@ fi
+unset enableval
# Check whether --enable-tulip or --disable-tulip was given.
if test "${enable_tulip+set}" = set; then
enableval="$enable_tulip"
fi;
-enable_tulip=${enable_tulip-$enable_default_device_drivers}
-if test x"$enable_tulip" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_DEC_ELCP 1
@@ -3241,13 +3328,14 @@ fi
+unset enableval
# Check whether --enable-fmv18x or --disable-fmv18x was given.
if test "${enable_fmv18x+set}" = set; then
enableval="$enable_fmv18x"
fi;
-enable_fmv18x=${enable_fmv18x-$enable_default_device_drivers}
-if test x"$enable_fmv18x" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_FMV18X 1
@@ -3266,13 +3354,14 @@ fi
+unset enableval
# Check whether --enable-3c515 or --disable-3c515 was given.
if test "${enable_3c515+set}" = set; then
enableval="$enable_3c515"
fi;
-enable_3c515=${enable_3c515-$enable_default_device_drivers}
-if test x"$enable_3c515" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_3C515 1
@@ -3291,13 +3380,14 @@ fi
+unset enableval
# Check whether --enable-pcnet32 or --disable-pcnet32 was given.
if test "${enable_pcnet32+set}" = set; then
enableval="$enable_pcnet32"
fi;
-enable_pcnet32=${enable_pcnet32-$enable_default_device_drivers}
-if test x"$enable_pcnet32" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_PCNET32 1
@@ -3315,13 +3405,14 @@ _ACEOF
fi
-# Check whether --enable-ne2kpci or --disable-ne2kpci was given.
-if test "${enable_ne2kpci+set}" = set; then
- enableval="$enable_ne2kpci"
+unset enableval
+# Check whether --enable-ne2k-pci or --disable-ne2k-pci was given.
+if test "${enable_ne2k_pci+set}" = set; then
+ enableval="$enable_ne2k_pci"
fi;
-enable_ne2kpci=${enable_ne2kpci-$enable_default_device_drivers}
-if test x"$enable_ne2kpci" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_NE2K_PCI 1
@@ -3339,13 +3430,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-yellowfin or --disable-yellowfin was given.
if test "${enable_yellowfin+set}" = set; then
enableval="$enable_yellowfin"
fi;
-enable_yellowfin=${enable_yellowfin-$enable_default_device_drivers}
-if test x"$enable_yellowfin" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_YELLOWFIN 1
@@ -3364,13 +3456,14 @@ fi
+unset enableval
# Check whether --enable-rtl8139 or --disable-rtl8139 was given.
if test "${enable_rtl8139+set}" = set; then
enableval="$enable_rtl8139"
fi;
-enable_rtl8139=${enable_rtl8139-$enable_default_device_drivers}
-if test x"$enable_rtl8139" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_RTL8139 1
@@ -3389,13 +3482,14 @@ fi
+unset enableval
# Check whether --enable-epic100 or --disable-epic100 was given.
if test "${enable_epic100+set}" = set; then
enableval="$enable_epic100"
fi;
-enable_epic100=${enable_epic100-$enable_default_device_drivers}
-if test x"$enable_epic100" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_EPIC 1
@@ -3414,13 +3508,14 @@ fi
+unset enableval
# Check whether --enable-tlan or --disable-tlan was given.
if test "${enable_tlan+set}" = set; then
enableval="$enable_tlan"
fi;
-enable_tlan=${enable_tlan-$enable_default_device_drivers}
-if test x"$enable_tlan" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_TLAN 1
@@ -3439,13 +3534,14 @@ fi
-# Check whether --enable-viarhine or --disable-viarhine was given.
-if test "${enable_viarhine+set}" = set; then
- enableval="$enable_viarhine"
+unset enableval
+# Check whether --enable-via-rhine or --disable-via-rhine was given.
+if test "${enable_via_rhine+set}" = set; then
+ enableval="$enable_via_rhine"
fi;
-enable_viarhine=${enable_viarhine-$enable_default_device_drivers}
-if test x"$enable_viarhine" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_VIA_RHINE 1
@@ -3464,13 +3560,14 @@ fi
+unset enableval
# Check whether --enable-hamachi or --disable-hamachi was given.
if test "${enable_hamachi+set}" = set; then
enableval="$enable_hamachi"
fi;
-enable_hamachi=${enable_hamachi-$enable_default_device_drivers}
-if test x"$enable_hamachi" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_HAMACHI 1
@@ -3489,13 +3586,14 @@ fi
-# Check whether --enable-intelgige or --disable-intelgige was given.
-if test "${enable_intelgige+set}" = set; then
- enableval="$enable_intelgige"
+unset enableval
+# Check whether --enable-intel-gige or --disable-intel-gige was given.
+if test "${enable_intel_gige+set}" = set; then
+ enableval="$enable_intel_gige"
fi;
-enable_intelgige=${enable_intelgige-$enable_default_device_drivers}
-if test x"$enable_intelgige" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_INTEL_GIGE 1
@@ -3514,13 +3612,14 @@ fi
+unset enableval
# Check whether --enable-myson803 or --disable-myson803 was given.
if test "${enable_myson803+set}" = set; then
enableval="$enable_myson803"
fi;
-enable_myson803=${enable_myson803-$enable_default_device_drivers}
-if test x"$enable_myson803" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_MYSON803 1
@@ -3539,13 +3638,14 @@ fi
+unset enableval
# Check whether --enable-natsemi or --disable-natsemi was given.
if test "${enable_natsemi+set}" = set; then
enableval="$enable_natsemi"
fi;
-enable_natsemi=${enable_natsemi-$enable_default_device_drivers}
-if test x"$enable_natsemi" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_NATSEMI 1
@@ -3564,13 +3664,14 @@ fi
+unset enableval
# Check whether --enable-ns820 or --disable-ns820 was given.
if test "${enable_ns820+set}" = set; then
enableval="$enable_ns820"
fi;
-enable_ns820=${enable_ns820-$enable_default_device_drivers}
-if test x"$enable_ns820" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_NS820 1
@@ -3589,13 +3690,14 @@ fi
+unset enableval
# Check whether --enable-starfire or --disable-starfire was given.
if test "${enable_starfire+set}" = set; then
enableval="$enable_starfire"
fi;
-enable_starfire=${enable_starfire-$enable_default_device_drivers}
-if test x"$enable_starfire" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_STARFIRE 1
@@ -3614,13 +3716,14 @@ fi
+unset enableval
# Check whether --enable-sundance or --disable-sundance was given.
if test "${enable_sundance+set}" = set; then
enableval="$enable_sundance"
fi;
-enable_sundance=${enable_sundance-$enable_default_device_drivers}
-if test x"$enable_sundance" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SUNDANCE 1
@@ -3639,13 +3742,14 @@ fi
-# Check whether --enable-winbond840 or --disable-winbond840 was given.
-if test "${enable_winbond840+set}" = set; then
- enableval="$enable_winbond840"
+unset enableval
+# Check whether --enable-winbond-840 or --disable-winbond-840 was given.
+if test "${enable_winbond_840+set}" = set; then
+ enableval="$enable_winbond_840"
fi;
-enable_winbond840=${enable_winbond840-$enable_default_device_drivers}
-if test x"$enable_winbond840" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_WINBOND840 1
@@ -3668,13 +3772,14 @@ fi
+unset enableval
# Check whether --enable-i82365 or --disable-i82365 was given.
if test "${enable_i82365+set}" = set; then
enableval="$enable_i82365"
fi;
-enable_i82365=${enable_i82365-$enable_default_device_drivers}
-if test x"$enable_i82365" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_I82365 1
@@ -3693,43 +3798,42 @@ fi
-
-
- # Check whether --enable-pcmcia-isa or --disable-pcmcia-isa was given.
+unset enableval
+# Check whether --enable-pcmcia-isa or --disable-pcmcia-isa was given.
if test "${enable_pcmcia_isa+set}" = set; then
enableval="$enable_pcmcia_isa"
fi;
- enable_pcmcia_isa=${enable_pcmcia_isa-$enable_default_device_drivers}
- if test x"$enable_pcmcia_isa" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_ISA 1
_ACEOF
- device_drivers="$device_drivers "
- if test "${driver_class_pcmcia_selected+set}" != set; then
- driver_class_pcmcia_selected=yes
- cat >>confdefs.h <<_ACEOF
+ device_drivers="$device_drivers "
+ if test "${driver_class_pcmcia_selected+set}" != set; then
+ driver_class_pcmcia_selected=yes
+ cat >>confdefs.h <<_ACEOF
#define $driver_class_pcmcia_option 1
_ACEOF
- device_drivers="$device_drivers $driver_class_pcmcia_files"
- fi
+ device_drivers="$device_drivers $driver_class_pcmcia_files"
fi
+fi
-
+unset enableval
# Check whether --enable-3c574_cs or --disable-3c574_cs was given.
if test "${enable_3c574_cs+set}" = set; then
enableval="$enable_3c574_cs"
fi;
-enable_3c574_cs=${enable_3c574_cs-$enable_default_device_drivers}
-if test x"$enable_3c574_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_3C574_CS 1
@@ -3748,13 +3852,14 @@ fi
+unset enableval
# Check whether --enable-3c589_cs or --disable-3c589_cs was given.
if test "${enable_3c589_cs+set}" = set; then
enableval="$enable_3c589_cs"
fi;
-enable_3c589_cs=${enable_3c589_cs-$enable_default_device_drivers}
-if test x"$enable_3c589_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_3C589_CS 1
@@ -3773,13 +3878,14 @@ fi
+unset enableval
# Check whether --enable-axnet_cs or --disable-axnet_cs was given.
if test "${enable_axnet_cs+set}" = set; then
enableval="$enable_axnet_cs"
fi;
-enable_axnet_cs=${enable_axnet_cs-$enable_default_device_drivers}
-if test x"$enable_axnet_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_AXNET_CS 1
@@ -3798,13 +3904,14 @@ fi
+unset enableval
# Check whether --enable-fmvj18x_cs or --disable-fmvj18x_cs was given.
if test "${enable_fmvj18x_cs+set}" = set; then
enableval="$enable_fmvj18x_cs"
fi;
-enable_fmvj18x_cs=${enable_fmvj18x_cs-$enable_default_device_drivers}
-if test x"$enable_fmvj18x_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_FMVJ18X_CS 1
@@ -3823,13 +3930,14 @@ fi
+unset enableval
# Check whether --enable-nmclan_cs or --disable-nmclan_cs was given.
if test "${enable_nmclan_cs+set}" = set; then
enableval="$enable_nmclan_cs"
fi;
-enable_nmclan_cs=${enable_nmclan_cs-$enable_default_device_drivers}
-if test x"$enable_nmclan_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_NMCLAN_CS 1
@@ -3847,13 +3955,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-pcnet_cs or --disable-pcnet_cs was given.
if test "${enable_pcnet_cs+set}" = set; then
enableval="$enable_pcnet_cs"
fi;
-enable_pcnet_cs=${enable_pcnet_cs-$enable_default_device_drivers}
-if test x"$enable_pcnet_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_PCNET_CS 1
@@ -3871,13 +3980,14 @@ _ACEOF
fi
+unset enableval
# Check whether --enable-smc91c92_cs or --disable-smc91c92_cs was given.
if test "${enable_smc91c92_cs+set}" = set; then
enableval="$enable_smc91c92_cs"
fi;
-enable_smc91c92_cs=${enable_smc91c92_cs-$enable_default_device_drivers}
-if test x"$enable_smc91c92_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_SMC91C92_CS 1
@@ -3896,13 +4006,14 @@ fi
+unset enableval
# Check whether --enable-xirc2ps_cs or --disable-xirc2ps_cs was given.
if test "${enable_xirc2ps_cs+set}" = set; then
enableval="$enable_xirc2ps_cs"
fi;
-enable_xirc2ps_cs=${enable_xirc2ps_cs-$enable_default_device_drivers}
-if test x"$enable_xirc2ps_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_XIRC2PS_CS 1
@@ -3922,13 +4033,14 @@ fi
+unset enableval
# Check whether --enable-orinoco_cs or --disable-orinoco_cs was given.
if test "${enable_orinoco_cs+set}" = set; then
enableval="$enable_orinoco_cs"
fi;
-enable_orinoco_cs=${enable_orinoco_cs-$enable_default_device_drivers}
-if test x"$enable_orinoco_cs" = xyes; then
+enableval=${enableval-$enable_default_device_drivers}
+if test x"$enableval" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define CONFIG_ORINOCO_CS 1
diff --git a/i386/linux/device-drivers.h.in b/i386/linux/device-drivers.h.in
index d5ae3ea..48be711 100644
--- a/i386/linux/device-drivers.h.in
+++ b/i386/linux/device-drivers.h.in
@@ -1,117 +1,137 @@
/* device-drivers.h.in. Generated from configure.ac by autoheader. */
-/* 3c515 */
+/* 3c515: device driver for Ethernet controller 3Com 515 ISA Fast EtherLink */
#undef CONFIG_3C515
-/* 3c574_cs */
+/* 3c574_cs: device driver for 3Com 3c574 ``RoadRunner'' PCMCIA Ethernet */
#undef CONFIG_3C574_CS
-/* 3c589_cs */
+/* 3c589_cs: device driver for 3Com 3c589 PCMCIA Ethernet card */
#undef CONFIG_3C589_CS
-/* ac3200 */
+/* ac3200: device driver for Ethernet controller Ansel Communications EISA
+ 3200 */
#undef CONFIG_AC3200
-/* apricot */
+/* apricot: device driver for Ethernet controller Apricot XEN-II on board
+ ethernet */
#undef CONFIG_APRICOT
-/* at1700 */
+/* at1700: device driver for Ethernet controller AT1700 (Fujitsu 86965) */
#undef CONFIG_AT1700
-/* atp */
+/* atp: device driver for Ethernet controller AT-LAN-TEC/RealTek pocket
+ adaptor */
#undef CONFIG_ATP
-/* axnet_cs */
+/* axnet_cs: device driver for Asix AX88190-based PCMCIA Ethernet adapters */
#undef CONFIG_AXNET_CS
-/* floppy */
+/* floppy: device driver for PC floppy */
#undef CONFIG_BLK_DEV_FD
-/* ide */
+/* ide: device driver for IDE disks */
#undef CONFIG_BLK_DEV_IDE
-/* de4x5 */
+/* de4x5: device driver for Ethernet controller DE4x5 (de4x5, de425, de434,
+ de435, de450, de500) */
#undef CONFIG_DE4X5
-/* de600 */
+/* de600: device driver for Ethernet controller D-Link DE-600 */
#undef CONFIG_DE600
-/* de620 */
+/* de620: device driver for Ethernet controller D-Link DE-620 */
#undef CONFIG_DE620
-/* tulip */
+/* tulip: device driver for Ethernet controller DECchip Tulip (dc21x4x) PCI
+ (elcp, tulip) */
#undef CONFIG_DEC_ELCP
-/* depca */
+/* depca: device driver for Ethernet controller DEPCA (de100, de101, de200,
+ de201, de202, de210, de422) */
#undef CONFIG_DEPCA
-/* e2100 */
+/* e2100: device driver for Ethernet controller Cabletron E21xx */
#undef CONFIG_E2100
-/* eexpress */
+/* eexpress: device driver for Ethernet controller EtherExpress 16 */
#undef CONFIG_EEXPRESS
-/* eepro */
+/* eepro: device driver for Ethernet controller EtherExpressPro */
#undef CONFIG_EEXPRESS_PRO
-/* eepro100 */
+/* eepro100: device driver for Ethernet controller Intel EtherExpressPro PCI
+ 10+/100B/100+ */
#undef CONFIG_EEXPRESS_PRO100B
-/* 3c501 */
+/* 3c501: device driver for Ethernet controller 3COM 501 (3c501) / Etherlink I
+ */
#undef CONFIG_EL1
-/* 3c507 */
+/* 3c507: device driver for Ethernet controller 3Com 507 (3c507, el16) */
#undef CONFIG_EL16
-/* 3c503 */
+/* 3c503: device driver for Ethernet controller 3Com 503 (3c503) / Etherlink
+ II */
#undef CONFIG_EL2
-/* 3c509 */
+/* 3c509: device driver for Ethernet controller 3Com 509/579 (3c509, 3c579) /
+ Etherlink III */
#undef CONFIG_EL3
-/* 3c505 */
+/* 3c505: device driver for Ethernet controller 3Com 505 (3c505, elplus) */
#undef CONFIG_ELPLUS
-/* epic100 */
+/* epic100: device driver for Ethernet controller SMC 83c170/175 EPIC/100
+ (epic, epic100) / EtherPower II */
#undef CONFIG_EPIC
-/* eth16i */
+/* eth16i: device driver for Ethernet controller ICL EtherTeam 16i/32 (eth16i,
+ eth32) */
#undef CONFIG_ETH16I
-/* ewrk3 */
+/* ewrk3: device driver for Ethernet controller EtherWORKS 3 (ewrk3, de203,
+ de204, de205) */
#undef CONFIG_EWRK3
-/* fmv18x */
+/* fmv18x: device driver for Ethernet controller FMV-181/182/183/184 */
#undef CONFIG_FMV18X
-/* fmvj18x_cs */
+/* fmvj18x_cs: device driver for fmvj18x chipset based PCMCIA Ethernet cards
+ */
#undef CONFIG_FMVJ18X_CS
-/* hamachi */
+/* hamachi: device driver for Ethernet controller Packet Engines "Hamachi"
+ GNIC-2 Gigabit Ethernet */
#undef CONFIG_HAMACHI
-/* hp100 */
+/* hp100: device driver for Ethernet controller HP 10/100VG PCLAN (ISA, EISA,
+ PCI) (hp100, hpj2577, hpj2573, hpj2585, hp27248b) */
#undef CONFIG_HP100
-/* hp */
+/* hp: device driver for Ethernet controller HP PCLAN (27245 and other 27xxx
+ series) */
#undef CONFIG_HPLAN
-/* hpplus */
+/* hp-plus: device driver for Ethernet controller HP PCLAN+ (27247B and
+ 27252A) */
#undef CONFIG_HPLAN_PLUS
-/* i82365 */
+/* i82365: device driver for Intel 82365 PC Card controller */
#undef CONFIG_I82365
/* Driver Class net */
#undef CONFIG_INET
-/* intelgige */
+/* intel-gige: device driver for Ethernet controller Intel PCI Gigabit
+ Ethernet */
#undef CONFIG_INTEL_GIGE
-/* disable isa-bus-support (pcmcia core) */
+/* pcmcia-isa: option isa bus support in the pcmcia core */
#undef CONFIG_ISA
-/* lance */
+/* lance: device driver for Ethernet controller AMD LANCE and PCnet (at1500,
+ ne2100) */
#undef CONFIG_LANCE
/* 386 */
@@ -126,184 +146,208 @@
/* 686 */
#undef CONFIG_M686
-/* myson803 */
+/* myson803: device driver for Ethernet controller Myson MTD803 Ethernet
+ adapter series */
#undef CONFIG_MYSON803
-/* natsemi */
+/* natsemi: device driver for Ethernet controller National Semiconductor
+ DP8381x series PCI Ethernet */
#undef CONFIG_NATSEMI
-/* ne */
+/* ne: device driver for Ethernet controller NE2000/NE1000 ISA (ne, ne1000,
+ ne2000) */
#undef CONFIG_NE2000
-/* ne2kpci */
+/* ne2k-pci: device driver for Ethernet controller PCI NE2000 */
#undef CONFIG_NE2K_PCI
-/* ni52 */
+/* ni52: device driver for Ethernet controller NI5210 */
#undef CONFIG_NI52
-/* ni65 */
+/* ni65: device driver for Ethernet controller NI6510 */
#undef CONFIG_NI65
-/* nmclan_cs */
+/* nmclan_cs: device driver for New Media Ethernet LAN PCMCIA cards */
#undef CONFIG_NMCLAN_CS
-/* ns820 */
+/* ns820: device driver for Ethernet controller National Semiconductor DP8382x
+ series PCI Ethernet */
#undef CONFIG_NS820
-/* orinoco_cs */
+/* orinoco_cs: device driver for Hermes or Prism 2 PCMCIA Wireless adapters
+ (Orinoco) */
#undef CONFIG_ORINOCO_CS
/* Driver Class pcmcia */
#undef CONFIG_PCMCIA
-/* pcnet32 */
+/* pcnet32: device driver for Ethernet controller AMD PCI PCnet32 (PCI bus
+ NE2100 cards) */
#undef CONFIG_PCNET32
-/* pcnet_cs */
+/* pcnet_cs: device driver for NS8390-based PCMCIA cards */
#undef CONFIG_PCNET_CS
-/* rtl8139 */
+/* rtl8139: device driver for Ethernet controller RealTek 8129/8139 (rtl8129,
+ rtl8139) (not 8019/8029!) */
#undef CONFIG_RTL8139
/* Driver Class scsi */
#undef CONFIG_SCSI
-/* wd7000 */
+/* wd7000: device driver for SCSI controller WD 7000 */
#undef CONFIG_SCSI_7000FASST
-/* advansys */
+/* advansys: device driver for SCSI controller AdvanSys */
#undef CONFIG_SCSI_ADVANSYS
-/* aha152x */
+/* aha152x: device driver for SCSI controller Adaptec AHA-152x/2825 (aha152x,
+ aha2825) */
#undef CONFIG_SCSI_AHA152X
-/* aha1542 */
+/* aha1542: device driver for SCSI controller Adaptec AHA-1542 */
#undef CONFIG_SCSI_AHA1542
-/* aha1740 */
+/* aha1740: device driver for SCSI controller Adaptec AHA-1740 */
#undef CONFIG_SCSI_AHA1740
-/* aic7xxx */
+/* aic7xxx: device driver for SCSI controller Adaptec AIC7xxx */
#undef CONFIG_SCSI_AIC7XXX
-/* AM53C974 */
+/* AM53C974: device driver for SCSI controller AM53/79C974 (am53c974,
+ am79c974) */
#undef CONFIG_SCSI_AM53C974
-/* BusLogic */
+/* BusLogic: device driver for SCSI controller BusLogic */
#undef CONFIG_SCSI_BUSLOGIC
-/* tmscsim */
+/* tmscsim: device driver for SCSI controller Tekram DC-390(T) (dc390, dc390t)
+ */
#undef CONFIG_SCSI_DC390T
-/* dtc */
+/* dtc: device driver for SCSI controller DTC3180/3280 (dtc3180, dtc3280) */
#undef CONFIG_SCSI_DTC3280
-/* eata */
+/* eata: device driver for SCSI controller EATA ISA/EISA/PCI (DPT and generic
+ EATA/DMA-compliant boards) */
#undef CONFIG_SCSI_EATA
-/* eata_dma */
+/* eata_dma: device driver for SCSI controller EATA-DMA (DPT, NEC, AT&T, SNI,
+ AST, Olivetti, Alphatronix) */
#undef CONFIG_SCSI_EATA_DMA
-/* eata_pio */
+/* eata_pio: device driver for SCSI controller EATA-PIO (old DPT PM2001,
+ PM2012A) */
#undef CONFIG_SCSI_EATA_PIO
-/* fdomain */
+/* fdomain: device driver for SCSI controller Future Domain 16xx */
#undef CONFIG_SCSI_FUTURE_DOMAIN
-/* gdth */
+/* gdth: device driver for GDT SCSI Disk Array Controller */
#undef CONFIG_SCSI_GDTH
-/* g_NCR5380 */
+/* g_NCR5380: device driver for SCSI controller Generic NCR5380/53c400
+ (ncr5380, ncr53c400) */
#undef CONFIG_SCSI_GENERIC_NCR5380
-/* in2000 */
+/* in2000: device driver for SCSI controller Always IN 2000 */
#undef CONFIG_SCSI_IN2000
-/* NCR53c406a */
+/* NCR53c406a: device driver for SCSI controller NCR53c406a chip */
#undef CONFIG_SCSI_NCR53C406A
-/* 53c78xx */
+/* 53c78xx: device driver for SCSI controller NCR 53C7,8xx */
#undef CONFIG_SCSI_NCR53C7xx
-/* ncr53c8xx */
+/* ncr53c8xx: device driver for SCSI controller NCR53C8XX (ncr53c8xx, dc390f,
+ dc390u, dc390w) */
#undef CONFIG_SCSI_NCR53C8XX
/* scsi omit flashpoint */
#undef CONFIG_SCSI_OMIT_FLASHPOINT
-/* pas16 */
+/* pas16: device driver for SCSI controller PAS16 */
#undef CONFIG_SCSI_PASS16
-/* ppa */
+/* ppa: device driver for IOMEGA Parallel Port ZIP drive */
#undef CONFIG_SCSI_PPA
-/* qlogicfas */
+/* qlogicfas: device driver for SCSI controller Qlogic FAS */
#undef CONFIG_SCSI_QLOGIC_FAS
-/* qlogicisp */
+/* qlogicisp: device driver for SCSI controller Qlogic ISP */
#undef CONFIG_SCSI_QLOGIC_ISP
-/* seagate */
+/* seagate: device driver for SCSI controller Seagate ST02, Future Domain
+ TMC-8xx */
#undef CONFIG_SCSI_SEAGATE
-/* t128 */
+/* t128: device driver for SCSI controller Trantor T128/T128F/T228 (t128,
+ t128f, t228) */
#undef CONFIG_SCSI_T128
-/* u1434f */
+/* u14-34f: device driver for SCSI controller UltraStor 14F/34F */
#undef CONFIG_SCSI_U14_34F
-/* ultrastor */
+/* ultrastor: device driver for SCSI controller UltraStor */
#undef CONFIG_SCSI_ULTRASTOR
-/* seeq8005 */
+/* seeq8005: device driver for Ethernet controller Seeq8005 */
#undef CONFIG_SEEQ8005
-/* sk_g16 */
+/* sk_g16: device driver for Ethernet controller Schneider & Koch G16 */
#undef CONFIG_SK_G16
-/* smc91c92_cs */
+/* smc91c92_cs: device driver for SMC91c92-based PCMCIA cards */
#undef CONFIG_SMC91C92_CS
-/* starfire */
+/* starfire: device driver for Ethernet controller Adaptec Starfire network
+ adapter */
#undef CONFIG_STARFIRE
-/* sundance */
+/* sundance: device driver for Ethernet controller Sundance ST201 "Alta" PCI
+ Ethernet */
#undef CONFIG_SUNDANCE
-/* tlan */
+/* tlan: device driver for Ethernet controller TI ThunderLAN */
#undef CONFIG_TLAN
-/* smcultra */
+/* smc-ultra: device driver for Ethernet controller SMC Ultra */
#undef CONFIG_ULTRA
-/* smcultra32 */
+/* smc-ultra32: device driver for Ethernet controller SMC Ultra32 */
#undef CONFIG_ULTRA32
-/* viarhine */
+/* via-rhine: device driver for Ethernet controller VIA Rhine */
#undef CONFIG_VIA_RHINE
-/* 3c59x */
+/* 3c59x: device driver for Ethernet controller 3Com 59x/90x (3c59x, 3c590,
+ 3c592, 3c595, 3c597, 3c90x, 3c900, 3c905) "Vortex/Boomerang" */
#undef CONFIG_VORTEX
-/* wavelan */
+/* wavelan: device driver for Ethernet controller AT&T WaveLAN & DEC RoamAbout
+ DS */
#undef CONFIG_WAVELAN
-/* wd */
+/* wd: device driver for Ethernet controller WD80x3 */
#undef CONFIG_WD80x3
-/* winbond840 */
+/* winbond-840: device driver for Ethernet controller Winbond W89c840 PCI
+ Ethernet */
#undef CONFIG_WINBOND840
/* Driver Class wireless */
#undef CONFIG_WIRELESS
-/* xirc2ps_cs */
+/* xirc2ps_cs: device driver for Xircom CreditCard and Realport PCMCIA
+ ethernet */
#undef CONFIG_XIRC2PS_CS
-/* yellowfin */
+/* yellowfin: device driver for Ethernet controller Packet Engines Yellowfin
+ Gigabit-NIC */
#undef CONFIG_YELLOWFIN
-/* znet */
+/* znet: device driver for Ethernet controller Zenith Z-Note (znet, znote) */
#undef CONFIG_ZNET
/* CPU */