Initial source

1 files changed, 2990 insertions, 0 deletions

diff --git a/i386/i386at/kd.c b/i386/i386at/kd.c
new file mode 100644
index 0000000..6c41ec5
--- /dev/null
+++ b/i386/i386at/kd.c
@@ -0,0 +1,2990 @@
+/* 
+ * Mach Operating System
+ * Copyright (c) 1991,1990,1989 Carnegie Mellon University
+ * All Rights Reserved.
+ * 
+ * Permission to use, copy, modify and distribute this software and its
+ * documentation is hereby granted, provided that both the copyright
+ * notice and this permission notice appear in all copies of the
+ * software, derivative works or modified versions, and any portions
+ * thereof, and that both notices appear in supporting documentation.
+ * 
+ * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
+ * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
+ * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
+ * 
+ * Carnegie Mellon requests users of this software to return to
+ * 
+ *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
+ *  School of Computer Science
+ *  Carnegie Mellon University
+ *  Pittsburgh PA 15213-3890
+ * 
+ * any improvements or extensions that they make and grant Carnegie Mellon
+ * the rights to redistribute these changes.
+ */
+/* 
+ *	Olivetti Mach Console driver v0.0
+ *	Copyright Ing. C. Olivetti & C. S.p.A. 1988, 1989
+ *	All rights reserved.
+ *
+ */ 
+/*
+  Copyright 1988, 1989 by Olivetti Advanced Technology Center, Inc.,
+Cupertino, California.
+
+		All Rights Reserved
+
+  Permission to use, copy, modify, and distribute this software and
+its documentation for any purpose and without fee is hereby
+granted, provided that the above copyright notice appears in all
+copies and that both the copyright notice and this permission notice
+appear in supporting documentation, and that the name of Olivetti
+not be used in advertising or publicity pertaining to distribution
+of the software without specific, written prior permission.
+
+  OLIVETTI DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
+IN NO EVENT SHALL OLIVETTI BE LIABLE FOR ANY SPECIAL, INDIRECT, OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT,
+NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUR OF OR IN CONNECTION
+WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+*/
+
+/*
+  Copyright 1988, 1989 by Intel Corporation, Santa Clara, California.
+
+		All Rights Reserved
+
+Permission to use, copy, modify, and distribute this software and
+its documentation for any purpose and without fee is hereby
+granted, provided that the above copyright notice appears in all
+copies and that both the copyright notice and this permission notice
+appear in supporting documentation, and that the name of Intel
+not be used in advertising or publicity pertaining to distribution
+of the software without specific, written prior permission.
+
+INTEL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
+IN NO EVENT SHALL INTEL BE LIABLE FOR ANY SPECIAL, INDIRECT, OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT,
+NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+*/
+
+/* $ Header:  $ */
+
+#include <mach_kdb.h>
+
+#include <sys/types.h>
+#include <kern/time_out.h>
+#include <device/conf.h>
+#include <device/tty.h>
+#include <device/io_req.h>
+#include <device/buf.h>		/* for struct uio (!) */
+#include <i386/io_port.h>
+#include <vm/vm_kern.h>
+#include "vm_param.h"
+#include <i386/machspl.h>
+#include <i386at/cram.h>
+#include <i386at/kd.h>
+#include <i386at/kdsoft.h>
+#include <cons.h>
+
+#include <blit.h>
+#if	NBLIT > 0
+#include <i386at/blitvar.h>
+#else
+#define blit_present()	FALSE
+#define blit_init()			/* nothing */
+#endif
+
+#include <evc.h>
+#if	NEVC > 0
+int evc1init();
+#else
+#define evc1init()	FALSE
+#endif
+
+#define DEBUG	1			/* export feep() */
+
+#define DEFAULT		-1		/* see kd_atoi */
+
+void kd_enqsc();			/* enqueues a scancode */
+
+void timeout();
+
+#define BROKEN_KEYBOARD_RESET
+
+
+struct tty       kd_tty;
+extern int	rebootflag;
+
+static void charput(), charmvup(), charmvdown(), charclear(), charsetcursor();
+static void kd_noopreset();
+boolean_t kdcheckmagic();
+
+int kdcnprobe(struct consdev *cp);
+int kdcninit(struct consdev *cp);
+int kdcngetc(dev_t dev, int wait);
+int kdcnputc(dev_t dev, int c);
+
+/* 
+ * These routines define the interface to the device-specific layer.
+ * See kdsoft.h for a more complete description of what each routine does.
+ */
+void	(*kd_dput)()	= charput;	/* put attributed char */
+void	(*kd_dmvup)()	= charmvup;	/* block move up */
+void	(*kd_dmvdown)()	= charmvdown;	/* block move down */
+void	(*kd_dclear)()	= charclear;	/* block clear */
+void	(*kd_dsetcursor)() = charsetcursor;
+				/* set cursor position on displayed page */
+void	(*kd_dreset)() = kd_noopreset;	/* prepare for reboot */
+
+/* forward declarations */
+unsigned char kd_getdata(), state2leds();
+
+
+/*
+ * Globals used for both character-based controllers and bitmap-based
+ * controllers.  Default is EGA.
+ */
+
+vm_offset_t kd_bitmap_start = (vm_offset_t)0xa0000; /* XXX - put in kd.h */
+u_char 	*vid_start	= (u_char *)EGA_START; 
+     				/* VM start of video RAM or frame buffer */
+csrpos_t kd_curpos	= 0;	/* set indirectly by kd_setpos--see kdsoft.h */
+short	kd_lines	= 25;
+short	kd_cols		= 80;
+char	kd_attr		= KA_NORMAL;	/* current attribute */
+
+/* 
+ * kd_state shows the state of the modifier keys (ctrl, caps lock, 
+ * etc.)  It should normally be changed by calling set_kd_state(), so
+ * that the keyboard status LEDs are updated correctly.
+ */
+int  	kd_state	= KS_NORMAL;
+int	kb_mode		= KB_ASCII;	/* event/ascii */
+
+/*
+ * State for the keyboard "mouse".
+ */
+int kd_kbd_mouse = 0;
+int kd_kbd_magic_scale = 6;
+int kd_kbd_magic_button  = 0;
+
+/* 
+ * Some keyboard commands work by sending a command, waiting for an 
+ * ack (handled by kdintr), then sending data, which generates a 
+ * second ack.  If we are in the middle of such a sequence, kd_ack
+ * shows what the ack is for.
+ * 
+ * When a byte is sent to the keyboard, it is kept around in last_sent 
+ * in case it needs to be resent.
+ * 
+ * The rest of the variables here hold the data required to complete
+ * the sequence.
+ * 
+ * XXX - the System V driver keeps a command queue, I guess in case we
+ * want to start a command while another is in progress.  Is this
+ * something we should worry about?
+ */
+enum why_ack {NOT_WAITING, SET_LEDS, DATA_ACK};
+enum why_ack	kd_ack	= NOT_WAITING;
+
+u_char last_sent = 0;
+
+u_char	kd_nextled	= 0;
+
+/*
+ * We don't provide any mutex protection for this flag because we know
+ * that this module will have been initialized by the time multiple
+ * threads are running.
+ */
+boolean_t kd_initialized 	= FALSE;	/* driver initialized? */
+boolean_t kd_extended	= FALSE;
+
+/* Array for processing escape sequences. */
+#define	K_MAXESC	16
+u_char	esc_seq[K_MAXESC];
+u_char	*esc_spt	= (u_char *)0;
+
+/*
+ * This array maps scancodes to Ascii characters (or character
+ * sequences). 
+ * Each row corresponds to one key.  There are NUMOUTPUT bytes per key
+ * state.  The states are ordered: Normal, SHIFT, CTRL, ALT,
+ * SHIFT/ALT.
+ */
+unsigned char	key_map[NUMKEYS][WIDTH_KMAP] = {
+{NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC},
+{K_ESC,NC,NC, K_ESC,NC,NC, K_ESC,NC,NC, K_ESC,NC,NC, K_ESC,NC,NC},
+{K_ONE,NC,NC, K_BANG,NC,NC, K_ONE,NC,NC, 0x1b,0x4e,0x31, 0x1b,0x4e,0x21},
+{K_TWO,NC,NC, K_ATSN,NC,NC, K_NUL,NC,NC, 0x1b,0x4e,0x32, 0x1b,0x4e,0x40},
+{K_THREE,NC,NC, K_POUND,NC,NC, K_THREE,NC,NC, 0x1b,0x4e,0x33, 0x1b,0x4e,0x23},
+{K_FOUR,NC,NC, K_DOLLAR,NC,NC, K_FOUR,NC,NC, 0x1b,0x4e,0x34, 0x1b,0x4e,0x24},
+{K_FIVE,NC,NC, K_PERC,NC,NC, K_FIVE,NC,NC, 0x1b,0x4e,0x35, 0x1b,0x4e,0x25},
+{K_SIX,NC,NC, K_CARET,NC,NC, K_RS,NC,NC, 0x1b,0x4e,0x36, 0x1b,0x4e,0x5e},
+{K_SEVEN,NC,NC, K_AMPER,NC,NC, K_SEVEN,NC,NC, 0x1b,0x4e,0x37, 0x1b,0x4e,0x26},
+{K_EIGHT,NC,NC, K_ASTER,NC,NC, K_EIGHT,NC,NC, 0x1b,0x4e,0x38, 0x1b,0x4e,0x2a},
+{K_NINE,NC,NC, K_LPAREN,NC,NC, K_NINE,NC,NC, 0x1b,0x4e,0x39,0x1b,0x4e,0x28},
+{K_ZERO,NC,NC, K_RPAREN,NC,NC, K_ZERO,NC,NC, 0x1b,0x4e,0x30,0x1b,0x4e,0x29},
+{K_MINUS,NC,NC, K_UNDSC,NC,NC, K_US,NC,NC, 0x1b,0x4e,0x2d, 0x1b,0x4e,0x5f},
+{K_EQL,NC,NC, K_PLUS,NC,NC, K_EQL,NC,NC, 0x1b,0x4e,0x3d, 0x1b,0x4e,0x2b},
+{K_BS,NC,NC, K_BS,NC,NC, K_BS,NC,NC, K_BS,NC,NC, K_BS,NC,NC},
+{K_HT,NC,NC, K_GS,NC,NC, K_HT,NC,NC, K_HT,NC,NC, K_GS,NC,NC},
+{K_q,NC,NC, K_Q,NC,NC, K_DC1,NC,NC, 0x1b,0x4e,0x71, 0x1b,0x4e,0x51},
+{K_w,NC,NC, K_W,NC,NC, K_ETB,NC,NC, 0x1b,0x4e,0x77, 0x1b,0x4e,0x57},
+{K_e,NC,NC, K_E,NC,NC, K_ENQ,NC,NC, 0x1b,0x4e,0x65, 0x1b,0x4e,0x45},
+{K_r,NC,NC, K_R,NC,NC, K_DC2,NC,NC, 0x1b,0x4e,0x72, 0x1b,0x4e,0x52},
+{K_t,NC,NC, K_T,NC,NC, K_DC4,NC,NC, 0x1b,0x4e,0x74, 0x1b,0x4e,0x54},
+{K_y,NC,NC, K_Y,NC,NC, K_EM,NC,NC, 0x1b,0x4e,0x79, 0x1b,0x4e,0x59},
+{K_u,NC,NC, K_U,NC,NC, K_NAK,NC,NC, 0x1b,0x4e,0x75, 0x1b,0x4e,0x55},
+{K_i,NC,NC, K_I,NC,NC, K_HT,NC,NC, 0x1b,0x4e,0x69, 0x1b,0x4e,0x49},
+{K_o,NC,NC, K_O,NC,NC, K_SI,NC,NC, 0x1b,0x4e,0x6f, 0x1b,0x4e,0x4f},
+{K_p,NC,NC, K_P,NC,NC, K_DLE,NC,NC, 0x1b,0x4e,0x70, 0x1b,0x4e,0x50},
+{K_LBRKT,NC,NC, K_LBRACE,NC,NC, K_ESC,NC,NC, 0x1b,0x4e,0x5b, 0x1b,0x4e,0x7b},
+{K_RBRKT,NC,NC, K_RBRACE,NC,NC, K_GS,NC,NC, 0x1b,0x4e,0x5d, 0x1b,0x4e,0x7d},
+{K_CR,NC,NC, K_CR,NC,NC, K_CR,NC,NC, K_CR,NC,NC, K_CR,NC,NC},
+{K_SCAN,K_CTLSC,NC, K_SCAN,K_CTLSC,NC, K_SCAN,K_CTLSC,NC, K_SCAN,K_CTLSC,NC, 
+	 K_SCAN,K_CTLSC,NC},
+{K_a,NC,NC, K_A,NC,NC, K_SOH,NC,NC, 0x1b,0x4e,0x61, 0x1b,0x4e,0x41},
+{K_s,NC,NC, K_S,NC,NC, K_DC3,NC,NC, 0x1b,0x4e,0x73, 0x1b,0x4e,0x53},
+{K_d,NC,NC, K_D,NC,NC, K_EOT,NC,NC, 0x1b,0x4e,0x65, 0x1b,0x4e,0x45},
+{K_f,NC,NC, K_F,NC,NC, K_ACK,NC,NC, 0x1b,0x4e,0x66, 0x1b,0x4e,0x46},
+{K_g,NC,NC, K_G,NC,NC, K_BEL,NC,NC, 0x1b,0x4e,0x67, 0x1b,0x4e,0x47},
+{K_h,NC,NC, K_H,NC,NC, K_BS,NC,NC, 0x1b,0x4e,0x68, 0x1b,0x4e,0x48},
+{K_j,NC,NC, K_J,NC,NC, K_LF,NC,NC, 0x1b,0x4e,0x6a, 0x1b,0x4e,0x4a},
+{K_k,NC,NC, K_K,NC,NC, K_VT,NC,NC, 0x1b,0x4e,0x6b, 0x1b,0x4e,0x4b},
+{K_l,NC,NC, K_L,NC,NC, K_FF,NC,NC, 0x1b,0x4e,0x6c, 0x1b,0x4e,0x4c},
+{K_SEMI,NC,NC, K_COLON,NC,NC, K_SEMI,NC,NC, 0x1b,0x4e,0x3b, 0x1b,0x4e,0x3a},
+{K_SQUOTE,NC,NC,K_DQUOTE,NC,NC,K_SQUOTE,NC,NC,0x1b,0x4e,0x27,0x1b,0x4e,0x22},
+{K_GRAV,NC,NC, K_TILDE,NC,NC, K_RS,NC,NC, 0x1b,0x4e,0x60, 0x1b,0x4e,0x7e},
+{K_SCAN,K_LSHSC,NC, K_SCAN,K_LSHSC,NC, K_SCAN,K_LSHSC,NC, K_SCAN,K_LSHSC,NC,
+	 K_SCAN,K_LSHSC,NC},
+{K_BSLSH,NC,NC, K_PIPE,NC,NC, K_FS,NC,NC, 0x1b,0x4e,0x5c, 0x1b,0x4e,0x7c},
+{K_z,NC,NC, K_Z,NC,NC, K_SUB,NC,NC, 0x1b,0x4e,0x7a, 0x1b,0x4e,0x5a},
+{K_x,NC,NC, K_X,NC,NC, K_CAN,NC,NC, 0x1b,0x4e,0x78, 0x1b,0x4e,0x58},
+{K_c,NC,NC, K_C,NC,NC, K_ETX,NC,NC, 0x1b,0x4e,0x63, 0x1b,0x4e,0x43},
+{K_v,NC,NC, K_V,NC,NC, K_SYN,NC,NC, 0x1b,0x4e,0x76, 0x1b,0x4e,0x56},
+{K_b,NC,NC, K_B,NC,NC, K_STX,NC,NC, 0x1b,0x4e,0x62, 0x1b,0x4e,0x42},
+{K_n,NC,NC, K_N,NC,NC, K_SO,NC,NC, 0x1b,0x4e,0x6e, 0x1b,0x4e,0x4e},
+{K_m,NC,NC, K_M,NC,NC, K_CR,NC,NC, 0x1b,0x4e,0x6d, 0x1b,0x4e,0x4d},
+{K_COMMA,NC,NC, K_LTHN,NC,NC, K_COMMA,NC,NC, 0x1b,0x4e,0x2c, 0x1b,0x4e,0x3c},
+{K_PERIOD,NC,NC, K_GTHN,NC,NC, K_PERIOD,NC,NC,0x1b,0x4e,0x2e,0x1b,0x4e,0x3e},
+{K_SLASH,NC,NC, K_QUES,NC,NC, K_SLASH,NC,NC, 0x1b,0x4e,0x2f, 0x1b,0x4e,0x3f},
+{K_SCAN,K_RSHSC,NC, K_SCAN,K_RSHSC,NC, K_SCAN,K_RSHSC,NC, K_SCAN,K_RSHSC,NC, 
+	 K_SCAN,K_RSHSC,NC},
+{K_ASTER,NC,NC, K_ASTER,NC,NC, K_ASTER,NC,NC, 0x1b,0x4e,0x2a,0x1b,0x4e,0x2a},
+{K_SCAN,K_ALTSC,NC, K_SCAN,K_ALTSC,NC, K_SCAN,K_ALTSC,NC, K_SCAN,K_ALTSC,NC, 
+	 K_SCAN,K_ALTSC,NC},
+{K_SPACE,NC,NC, K_SPACE,NC,NC, K_NUL,NC,NC, K_SPACE,NC,NC, K_SPACE,NC,NC},
+{K_SCAN,K_CLCKSC,NC, K_SCAN,K_CLCKSC,NC, K_SCAN,K_CLCKSC,NC, 
+	 K_SCAN,K_CLCKSC,NC, K_SCAN,K_CLCKSC,NC},
+{K_F1, K_F1S, K_F1, K_F1, K_F1S},
+{K_F2, K_F2S, K_F2, K_F2, K_F2S},
+{K_F3, K_F3S, K_F3, K_F3, K_F3S},
+{K_F4, K_F4S, K_F4, K_F4, K_F4S},
+{K_F5, K_F5S, K_F5, K_F5, K_F5S},
+{K_F6, K_F6S, K_F6, K_F6, K_F6S},
+{K_F7, K_F7S, K_F7, K_F7, K_F7S},
+{K_F8, K_F8S, K_F8, K_F8, K_F8S},
+{K_F9, K_F9S, K_F9, K_F9, K_F9S},
+{K_F10, K_F10S, K_F10, K_F10, K_F10S},
+{K_SCAN,K_NLCKSC,NC, K_SCAN,K_NLCKSC,NC, K_SCAN,K_NLCKSC,NC, 
+	 K_SCAN,K_NLCKSC,NC, K_SCAN,K_NLCKSC,NC},
+{K_SCRL, K_NUL,NC,NC, K_SCRL, K_SCRL, K_NUL,NC,NC},
+{K_HOME, K_SEVEN,NC,NC, K_HOME, K_HOME, 0x1b,0x4e,0x37},
+{K_UA, K_EIGHT,NC,NC, K_UA, K_UA, 0x1b,0x4e,0x38},
+{K_PUP, K_NINE,NC,NC, K_PUP, K_PUP, 0x1b,0x4e,0x39},
+{0x1b,0x5b,0x53, K_MINUS,NC,NC, 0x1b,0x5b,0x53,0x1b,0x5b,0x53,0x1b,0x4e,0x2d},
+{K_LA, K_FOUR,NC,NC, K_LA, K_LA, 0x1b,0x4e,0x34},
+{0x1b,0x5b,0x47,K_FIVE,NC,NC,0x1b,0x5b,0x47, 0x1b,0x5b,0x47, 0x1b,0x4e,0x35},
+{K_RA, K_SIX,NC,NC, K_RA, K_RA, 0x1b,0x4e,0x36},
+{0x1b,0x5b,0x54,K_PLUS,NC,NC, 0x1b,0x5b,0x54, 0x1b,0x5b,0x54, 0x1b,0x4e,0x2b},
+{K_END, K_ONE,NC,NC, K_END, K_END, 0x1b,0x4e,0x31},
+{K_DA, K_TWO,NC,NC, K_DA, K_DA, 0x1b,0x4e,0x32},
+{K_PDN, K_THREE,NC,NC, K_PDN, K_PDN, 0x1b,0x4e,0x33},
+{K_INS, K_ZERO,NC,NC, K_INS, K_INS, 0x1b,0x4e,0x30},
+{K_DEL,NC,NC, K_PERIOD,NC,NC, K_DEL,NC,NC, K_DEL,NC,NC, 0x1b,0x4e,0x2e},
+{NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC},
+{NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC},
+{NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC,NC},
+{K_F11, K_F11S, K_F11, K_F11, K_F11S},
+{K_F12, K_F12S, K_F12, K_F12, K_F12S}
+};
+
+
+/*
+ * Globals used only for character-based controllers.
+ */
+
+short	kd_index_reg	= EGA_IDX_REG;
+short	kd_io_reg	= EGA_IO_REG;
+
+/*
+ * IO port sets for different controllers.
+ */
+io_reg_t vga_port_list[] = {
+	0x3b4, 0x3b5, 0x3b8, 0x3b9, 0x3ba,	/* MDA/EGA */
+	0x3d4, 0x3d5, 0x3d8, 0x3d9, 0x3da,	/* CGA/EGA */
+	0x3c0, 0x3c1, 0x3c2, 0x3c3, 0x3c4, 0x3c5, 0x3c6, 0x3c7,
+	0x3c8, 0x3c9, 0x3ca, 0x3cb, 0x3cc, 0x3cd, 0x3ce, 0x3cf,
+	IO_REG_NULL
+};
+
+mach_device_t	kd_io_device = 0;
+
+kd_io_map_open(device)
+	mach_device_t	device;
+{
+	kd_io_device = device;
+	io_port_create(device, vga_port_list);
+}
+
+kd_io_map_close()
+{
+	io_port_destroy(kd_io_device);
+	kd_io_device = 0;
+}
+
+/*
+ * Globals used only for bitmap-based controllers.  See kdsoft.h for
+ * an explanation of what some of these variables are used for.
+ */
+
+u_char	*font_start	= 0;		/* starting addr of font */
+
+short	fb_width	= 0;		/* bits in frame buffer scan line */
+short	fb_height	= 0;		/* scan lines in frame buffer*/
+short	char_width	= 0;		/* bit width of 1 char */
+short	char_height	= 0;		/* bit height of 1 char */
+short	chars_in_font	= 0;
+short	cursor_height	= 0;		/* bit height of cursor */
+
+/* These initial values are simply guesses. */
+u_char	char_black	= 0;
+u_char	char_white	= 0xff;
+
+short	xstart		= 0;
+short	ystart		= 0;
+
+short	char_byte_width	= 0;		/* char_width/NBBY */
+short	fb_byte_width	= 0;		/* fb_width/NBBY */
+short	font_byte_width	= 0;		/* num bytes in 1 scan line of font */
+
+/*
+ * Switch for poll vs. interrupt.
+ */
+int	kd_pollc = 0;
+
+#ifdef	DEBUG
+/* 
+ * feep:
+ *
+ *	Ring the bell for a short time. 
+ *	Warning: uses outb(). You may prefer to use kd_debug_put.
+ */
+feep()
+{
+	int i;
+
+	kd_bellon();
+	for (i = 0; i < 50000; ++i)
+		;
+	kd_belloff();
+}
+
+pause()
+{
+	int i;
+
+	for (i = 0; i < 50000; ++i)
+		;
+}
+
+/* 
+ * Put a debugging character on the screen.
+ * LOC=0 means put it in the bottom right corner, LOC=1 means put it 
+ * one column to the left, etc.
+ */
+kd_debug_put(loc, c)
+int	loc;
+char	c;
+{
+	csrpos_t pos = ONE_PAGE - (loc+1) * ONE_SPACE;
+
+	(*kd_dput)(pos, c, KA_NORMAL);
+}
+#endif /* DEBUG */
+
+
+extern int	mouse_in_use;
+int		old_kb_mode;
+
+cnpollc(on)
+boolean_t on;
+{
+	if (mouse_in_use) {
+		if (on) {
+		    /* switch into X */
+		    old_kb_mode = kb_mode;
+		    kb_mode = KB_ASCII;
+		    X_kdb_enter();
+
+		    kd_pollc++;
+		} else {
+		    --kd_pollc;
+
+		    /* switch out of X */
+		    X_kdb_exit();
+		    kb_mode = old_kb_mode;
+		}
+	} else {
+		if (on) {
+		    kd_pollc++;
+		} else {
+		    --kd_pollc;
+		}
+	}
+}
+
+
+
+/*
+ * kdopen:
+ *
+ *	This opens the console driver and sets up the tty and other
+ *	rudimentary stuff including calling the line discipline for
+ *	setting up the device independent stuff for a tty driver.
+ *
+ * input:	device number 'dev', and flag
+ *
+ * output:	device is opened and setup
+ *
+ */
+kdopen(dev, flag, ior)
+	dev_t	dev;
+	int	flag;
+	io_req_t ior;
+{
+	struct 	tty	*tp;
+	int	kdstart();
+	spl_t	o_pri;
+	int	kdstop();
+
+	tp = &kd_tty;
+	o_pri = spltty();
+	simple_lock(&tp->t_lock);
+	if (!(tp->t_state & (TS_ISOPEN|TS_WOPEN))) {
+		/* XXX ttychars allocates memory */
+		simple_unlock(&tp->t_lock);
+		ttychars(tp);
+		simple_lock(&tp->t_lock);
+		/*
+		 *	Special support for boot-time rc scripts, which don't
+		 *	stty the console.
+		 */ 
+		tp->t_oproc = kdstart;
+		tp->t_stop = kdstop;
+		tp->t_ospeed = tp->t_ispeed = B9600;
+		tp->t_flags = ODDP|EVENP|ECHO|CRMOD|XTABS;
+		kdinit();
+
+		/* XXX kd_io_map_open allocates memory */
+		simple_unlock(&tp->t_lock);
+		kd_io_map_open(ior->io_device);
+		simple_lock(&tp->t_lock);
+	}
+	tp->t_state |= TS_CARR_ON;
+	simple_unlock(&tp->t_lock);
+	splx(o_pri);
+	return (char_open(dev, tp, flag, ior));
+}
+
+
+/*
+ * kdclose:
+ *
+ *	This function merely executes the device independent code for
+ *	closing the line discipline.
+ *
+ * input:	device number 'dev', and flag
+ * 
+ * output:	device is closed
+ *
+ */
+/*ARGSUSED*/
+kdclose(dev, flag)
+int	dev;
+int	flag;
+{
+	struct	tty	*tp;
+
+	tp = &kd_tty;
+	{
+	    spl_t s = spltty();
+	    simple_lock(&tp->t_lock);
+	    ttyclose(tp);
+	    simple_unlock(&tp->t_lock);
+	    splx(s);
+	}
+
+	kd_io_map_close();
+
+	return;
+
+}
+
+
+/*
+ * kdread:
+ *
+ *	This function executes the device independent code to read from
+ *	the tty.
+ *
+ * input:	device number 'dev'
+ *
+ * output:	characters are read from tty clists
+ *
+ */
+/*ARGSUSED*/
+kdread(dev, uio)
+int	dev;
+struct	uio	*uio;
+{
+	struct	tty	*tp;
+  
+	tp = &kd_tty;
+	tp->t_state |= TS_CARR_ON;
+	return((*linesw[kd_tty.t_line].l_read)(tp, uio));
+}
+
+
+/*
+ * kdwrite:
+ *
+ *	This function does the device independent write action for this
+ *	console (tty) driver.
+ *
+ * input:	device number 'dev'
+ *
+ * output:	characters are written to tty clists
+ *
+ */
+/*ARGSUSED*/
+kdwrite(dev, uio)
+int	dev;
+struct	uio	*uio;
+{
+	return((*linesw[kd_tty.t_line].l_write)(&kd_tty, uio));
+}
+
+/* 
+ * Mmap.
+ */
+
+/*ARGSUSED*/
+int
+kdmmap(dev, off, prot)
+	dev_t dev;
+	off_t off;
+	int prot;
+{
+	if ((u_int) off >= (128*1024))
+		return(-1);
+
+	/* Get page frame number for the page to be mapped. */
+	return(i386_btop(kd_bitmap_start+off));
+}
+
+kdportdeath(dev, port)
+	dev_t	dev;
+	mach_port_t	port;
+{
+	return (tty_portdeath(&kd_tty, port));
+}
+
+/*ARGSUSED*/
+io_return_t kdgetstat(dev, flavor, data, count)
+	dev_t		dev;
+	int		flavor;
+	int *		data;		/* pointer to OUT array */
+	unsigned int	*count;		/* OUT */
+{
+	io_return_t	result;
+
+	switch (flavor) {
+	    case KDGSTATE:
+		if (*count < 1)
+		    return (D_INVALID_OPERATION);
+		*data = kd_state;
+		*count = 1;
+		result = D_SUCCESS;
+		break;
+
+	    case KDGKBENT:
+		result = kdgetkbent((struct kbentry *)data);
+		*count = sizeof(struct kbentry)/sizeof(int);
+		break;
+
+	    default:
+		result = tty_get_status(&kd_tty, flavor, data, count);
+		break;
+	}
+	return (result);
+}
+
+/*ARGSUSED*/
+io_return_t kdsetstat(dev, flavor, data, count)
+	dev_t		dev;
+	int		flavor;
+	int *		data;
+	unsigned int	count;
+{
+	io_return_t	result;
+
+	switch (flavor) {
+	    case KDSKBENT:
+		if (count < sizeof(struct kbentry)/sizeof(int)) {
+		    return (D_INVALID_OPERATION);
+		}
+		result = kdsetkbent((struct kbentry *)data, 0);
+		break;
+
+	    case KDSETBELL:
+		if (count < 1)
+		    return (D_INVALID_OPERATION);
+		result = kdsetbell(*data, 0);
+		break;
+
+	    default:
+		result = tty_set_status(&kd_tty, flavor, data, count);
+	}
+	return (result);
+}
+
+
+
+/* 
+ * kdsetbell:
+ * 
+ *	Turn the bell on or off.  Returns error code, if given bogus 
+ *	on/off value.
+ */
+kdsetbell(val, flags)
+int	val;				/* on or off */
+int	flags;				/* flags set for console */
+{
+	int err = 0;
+
+
+	if (val == KD_BELLON)
+		kd_bellon();
+	else if (val == KD_BELLOFF)
+		kd_belloff();
+	else
+		err = D_INVALID_OPERATION;
+
+	return(err);
+}
+
+
+/* 
+ * kdgetkbent:
+ * 
+ *	Get entry from key mapping table.  Returns error code, if any.
+ */
+kdgetkbent(kbent)
+struct kbentry *	kbent;
+{
+	u_char *cp;
+	spl_t o_pri = SPLKD();		/* probably superfluous */
+
+	cp = &key_map[kbent->kb_index][CHARIDX(kbent->kb_state)];
+	kbent->kb_value[0] = *cp++;
+	kbent->kb_value[1] = *cp++;
+	kbent->kb_value[2] = *cp;
+	(void)splx(o_pri);
+	return(0);
+}
+
+
+/* 
+ * kdsetkbent:
+ * 
+ *	Set entry in key mapping table.  Return error code, if any.
+ */
+int
+kdsetkbent(kbent, flags)
+struct kbentry *	kbent;
+int	flags;				/* flags set for console */
+{
+	u_char *cp;
+	spl_t o_pri;
+
+	o_pri = SPLKD();
+	cp = &key_map[kbent->kb_index][CHARIDX(kbent->kb_state)];
+	*cp++ = kbent->kb_value[0];
+	*cp++ = kbent->kb_value[1];
+	*cp = kbent->kb_value[2];
+	(void)splx(o_pri);
+	return(0);
+}
+
+/*
+ * kdintr:
+ *
+ *	This function is the interrupt code for the driver.  Since this is
+ *	a special tty (console), interrupts are only for input, so we read in
+ *	the character.  If in ascii mode, we then do the mapping translation 
+ *	from the keyboard switch table and place the characters on the tty's 
+ *	input switch table.  If in event mode, we create and queue a kd_event.
+ *
+ * input:	interrupt vector 'vec'
+ *
+ * output:	character or sequence is placed on appropriate queue
+ *
+ */
+/*ARGSUSED*/
+kdintr(vec, regs)
+int	vec;
+int	regs;
+{
+	struct	tty	*tp;
+	unsigned char	c;
+	unsigned char	scancode;
+	int		o_pri;
+	int		char_idx;
+	boolean_t	up = FALSE;		/* key-up event */
+	extern int	mouse_in_use;
+	if (kd_pollc)
+	    return;				/* kdb polling kbd */
+
+	tp = &kd_tty;
+#ifdef	old
+	while ((inb(K_STATUS) & K_OBUF_FUL) == 0);	/* this should never loop */
+#else	old
+	{
+		/*
+		 * Allow for keyboards that raise interrupt before 
+		 * the character gets to the buffer.  But don't wait
+		 * forever if grabbing the character by polling leaves
+		 * the interrupt on but buffer empty.
+		 */
+		/*
+		 * Micronics VLB motherboard with 486DX2 can report keyboard 
+		 * interrupt before K_STATUS register indicates that the
+		 * output buffer is full.  Moreover, the bus won't settle w
+		 * while we poll K_STATUS at speed.  Temporary fix is to break
+		 * out after safety runs out and pick up keyboard event.  This 
+		 * should be fixed eventually by putting a 1us timout between 
+		 * inb's to K_STATUS and fix the pic initialization order to 
+		 * avoid bootup keyboard wedging (ie make kd a real device)
+		 */
+		int safety = 1000;
+		while ((inb(K_STATUS) & K_OBUF_FUL) == 0)
+			if (!safety--) break;  /* XXX */
+	}
+#endif	old
+	/*
+	 * We may have seen a mouse event.
+	 */
+	if ((inb(K_STATUS) & 0x20) == 0x20) {
+		if (mouse_in_use) {
+			mouse_handle_byte((u_char)inb(K_RDWR));
+			return;
+		} else {
+			printf("M%xI", inb(K_RDWR));
+			return;
+		}
+	}
+
+	scancode = inb(K_RDWR);
+	if (scancode == K_EXTEND) {
+		if (kb_mode != KB_EVENT)
+			kd_extended = TRUE;
+		goto done;
+	} else if (scancode == K_RESEND) {
+		kd_resend();
+		goto done;
+	} else if (scancode == K_ACKSC) {
+		kd_handle_ack();
+		goto done;
+	} else if (kd_kbd_mouse && kd_kbd_magic(scancode)) {
+		goto done;
+	} else if (kdcheckmagic(scancode, &regs)) {
+		goto done;
+	} else if (kb_mode == KB_EVENT) {
+		kd_enqsc(scancode);
+		goto done;
+	} /* else... */
+
+	if (scancode & K_UP) {
+		up = TRUE;
+		scancode &= ~K_UP;
+	}
+	if (scancode < NUMKEYS) {
+		/* Lookup in map, then process. */
+		char_idx = kdstate2idx(kd_state, kd_extended);
+		c = key_map[scancode][char_idx];
+		if (c == K_SCAN) {
+			c = key_map[scancode][++char_idx];
+			set_kd_state(do_modifier(kd_state, c, up));
+		} else if (!up) {
+			/* regular key-down */
+			int max;	/* max index for char sequence */
+
+			max = char_idx + NUMOUTPUT;
+			char_idx++;
+			if (!kd_extended) {
+				if (kd_state&KS_CLKED) {
+ 					if (kd_isupper(c)) {
+						c += ('a' - 'A');
+						max = char_idx;
+					}
+					else if (kd_islower(c)) {
+						c -= ('a' - 'A');
+						max = char_idx;
+					}
+				}
+				/*
+				 * Notice that even if the keypad is remapped,
+				 * NumLock only effects the keys that are
+				 * physically part of the keypad.  Is this
+				 * The Right Thing?
+				 */
+				if ((kd_state&KS_NLKED) &&
+			    	    (((K_HOMESC) <= scancode) &&
+			     	    (scancode <= (K_DELSC)))) {
+					char_idx = CHARIDX(SHIFT_STATE);
+					c = key_map[scancode][char_idx];
+					max = char_idx + NUMOUTPUT;
+					char_idx++;
+				}
+			}
+
+			/* 
+			 * here's where we actually put the char (or
+			 * char sequence, for function keys) onto the
+			 * input queue.
+			 */
+			for ( ; (c != K_DONE) && (char_idx <= max); 
+			     c = key_map[scancode][char_idx++]) {	
+				(*linesw[tp->t_line].l_rint)(c, tp);
+			}
+			kd_extended = FALSE;
+		}
+	}
+
+ done:
+	return;
+}
+
+/* 
+ * kd_handle_ack:
+ * 
+ *	For pending commands, complete the command.  For data bytes, 
+ *	drop the ack on the floor.
+ */
+kd_handle_ack()
+{
+	switch (kd_ack) {
+	case SET_LEDS:
+		kd_setleds2();
+		kd_ack = DATA_ACK;
+		break;
+	case DATA_ACK:
+		kd_ack = NOT_WAITING;
+		break;
+	case NOT_WAITING:
+		printf("unexpected ACK from keyboard\n");
+		break;
+	default:
+		panic("bogus kd_ack\n");
+		break;
+	}
+}
+
+/* 
+ * kd_resend:
+ *
+ *	Resend a missed keyboard command or data byte.
+ */
+kd_resend()
+{
+	if (kd_ack == NOT_WAITING) 
+		printf("unexpected RESEND from keyboard\n");
+	else
+		kd_senddata(last_sent);
+}
+
+
+/*
+ * do_modifier:
+ *
+ *	Change keyboard state according to which modifier key and
+ *	whether it went down or up.
+ *
+ * input:	the current state, the key, and the key's direction.  
+ *		The key can be any key, not just a modifier key.
+ * 
+ * output:	the new state
+ */
+do_modifier(state, c, up)
+int	state;
+Scancode	c;
+boolean_t	up;
+{
+	switch (c) {
+	case (K_ALTSC):
+		if (up)
+			state &= ~KS_ALTED;
+		else
+			state |= KS_ALTED;
+		kd_extended = FALSE;
+		break;
+#ifndef	ORC
+	case (K_CLCKSC):
+#endif	ORC
+	case (K_CTLSC):
+		if (up)
+			state &= ~KS_CTLED;
+		else
+			state |= KS_CTLED;
+		kd_extended = FALSE;
+		break;
+#ifdef	ORC
+	case (K_CLCKSC):
+		if (!up)
+			state ^= KS_CLKED;
+		break;
+#endif	ORC
+	case (K_NLCKSC):
+		if (!up)
+			state ^= KS_NLKED;
+		break;
+	case (K_LSHSC):
+	case (K_RSHSC):
+		if (up)
+			state &= ~KS_SHIFTED;
+		else
+			state |= KS_SHIFTED;
+		kd_extended = FALSE;
+		break;
+	}
+
+	return(state);
+}
+
+
+/* 
+ * kdcheckmagic:
+ * 
+ *	Check for magic keystrokes for invoking the debugger or 
+ *	rebooting or ...
+ *
+ * input:	an unprocessed scancode
+ * 
+ * output:	TRUE if a magic key combination was recognized and 
+ *		processed.  FALSE otherwise.
+ *
+ * side effects:	
+ *		various actions possible, depending on which keys are
+ *		pressed.  If the debugger is called, steps are taken 
+ *		to ensure that the system doesn't think the magic keys 
+ *		are still held down.
+ */
+boolean_t
+kdcheckmagic(scancode, regs)
+Scancode	scancode;
+int		*regs;
+{
+	static int magic_state = KS_NORMAL; /* like kd_state */
+	boolean_t up = FALSE;
+	extern	int	rebootflag;
+
+	if (scancode == 0x46)		/* scroll lock */
+/*	if (scancode == 0x52)		** insert key */
+	{
+		kd_kbd_mouse = !kd_kbd_mouse;
+		kd_kbd_magic_button = 0;
+		return(TRUE);
+	}
+	if (scancode & K_UP) {
+		up = TRUE;
+		scancode &= ~K_UP;
+	}
+	magic_state = do_modifier(magic_state, scancode, up);
+
+	if ((magic_state&(KS_CTLED|KS_ALTED)) == (KS_CTLED|KS_ALTED)) {
+		switch (scancode) {
+#if	MACH_KDB
+		case K_dSC:		/*  ctl-alt-d */
+			kdb_kintr();	/* invoke debugger */
+			/* Returned from debugger, so reset kbd state. */
+			(void)SPLKD();
+			magic_state = KS_NORMAL;
+			if (kb_mode == KB_ASCII)
+				kd_state = KS_NORMAL;
+				/* setting leds kills kbd */
+			else {
+				kd_enqsc(K_ALTSC | K_UP);
+				kd_enqsc(K_CTLSC | K_UP);
+				kd_enqsc(K_dSC | K_UP);
+			}
+			return(TRUE);
+			break;
+#endif	MACH_KDB
+		case K_DELSC:		/* ctl-alt-del */
+			/* if rebootflag is on, reboot the system */
+			if (rebootflag)
+				kdreboot();
+			break;
+		}
+	}
+	return(FALSE);
+}
+
+
+/*
+ * kdstate2idx:
+ *
+ *	Return the value for the 2nd index into key_map that 
+ *	corresponds to the given state.
+ */
+kdstate2idx(state, extended)
+int	state;				/* bit vector, not a state index */
+boolean_t	extended;
+{
+	int state_idx = NORM_STATE;
+
+	if ((!extended) && state != KS_NORMAL) {
+		if ((state&(KS_SHIFTED|KS_ALTED)) == (KS_SHIFTED|KS_ALTED))
+			state_idx = SHIFT_ALT;
+		else if (state&KS_SHIFTED)
+			state_idx = SHIFT_STATE;
+		else if (state&KS_ALTED)
+			state_idx = ALT_STATE;
+		else if (state&KS_CTLED)
+			state_idx = CTRL_STATE;
+	}
+
+	return (CHARIDX(state_idx));
+}
+
+/*
+ * kdstart:
+ *
+ *	This function does the general processing of characters and other
+ *	operations for the device driver.  The device independent portion of
+ *	the tty driver calls this routine (it's setup in kdinit) with a
+ *	given command.  That command is then processed, and control is passed
+ *	back to the kernel.
+ *
+ * input:	tty pointer 'tp', and command to execute 'cmd'
+ *
+ * output:	command is executed
+ *
+ * Entered and left at spltty.  Drops priority to spl0 to display character.
+ * ASSUMES that it is never called from interrupt-driven code.
+ */
+kdstart(tp)
+struct	tty	*tp;
+{
+	spl_t	o_pri;
+	int	ch;
+	unsigned char	c;
+  
+	if (tp->t_state & TS_TTSTOP)
+		return;
+	for ( ; ; ) {
+		tp->t_state &= ~TS_BUSY; 
+		if (tp->t_state & TS_TTSTOP)
+			break;
+		if ((tp->t_outq.c_cc <= 0) || (ch = getc(&tp->t_outq)) == -1)
+			break;
+		c = ch;
+		/*
+		 * Drop priority for long screen updates. ttstart() calls us at
+		 * spltty.
+		 */
+		o_pri = splsoftclock();		/* block timeout */
+		if (c == (K_ESC)) {
+			if (esc_spt == esc_seq) {
+				*(esc_spt++)=(K_ESC);
+				*(esc_spt) = '\0';
+			} else {
+				kd_putc((K_ESC));
+				esc_spt = esc_seq;
+			}
+		} else {
+			if (esc_spt - esc_seq) {
+			        if (esc_spt - esc_seq > K_MAXESC - 1)
+					esc_spt = esc_seq;
+				else {
+					*(esc_spt++) = c;
+					*(esc_spt) = '\0';
+					kd_parseesc();
+				      }
+			} else {
+			        kd_putc(c);
+			}
+		}
+		splx(o_pri);
+	}
+	if (tp->t_outq.c_cc <= TTLOWAT(tp)) {
+		tt_write_wakeup(tp);
+	}
+}
+
+/*ARGSUSED*/
+kdstop(tp, flags)
+	register struct tty *tp;
+	int	flags;
+{
+	/*
+	 * do nothing - all characters are output by one call to
+	 * kdstart.
+	 */
+}
+
+/*
+ * kdinit:
+ *
+ *	This code initializes the structures and sets up the port registers
+ *	for the console driver.  
+ *
+ *	Each bitmap-based graphics card is likely to require a unique
+ *	way to determine the card's presence.  The driver runs through
+ *	each "special" card that it knows about and uses the first one
+ *	that it finds.  If it doesn't find any, it assumes that an
+ *	EGA-like card is installed.
+ *
+ * input	: None.	Interrupts are assumed to be disabled
+ * output	: Driver is initialized
+ *
+ */
+kdinit()
+{
+	void	kd_xga_init();
+	unsigned char	k_comm;		/* keyboard command byte */
+
+	if (kd_initialized)
+		return;
+
+	esc_spt = esc_seq;
+	kd_attr = KA_NORMAL;
+
+	/*
+	 * board specific initialization: set up globals and kd_dxxx
+	 * pointers, and synch displayed cursor with logical cursor.
+	 */
+	if (!evc1init())
+	  if (blit_present())
+		blit_init();
+	  else 
+		kd_xga_init();
+
+	/* get rid of any garbage in output buffer */
+	if (inb(K_STATUS) & K_OBUF_FUL)
+		(void)inb(K_RDWR);
+
+	kd_sendcmd(KC_CMD_READ);	/* ask for the ctlr command byte */
+	k_comm = kd_getdata();
+	k_comm &= ~K_CB_DISBLE;		/* clear keyboard disable bit */
+	k_comm |= K_CB_ENBLIRQ;		/* enable interrupt */
+	kd_sendcmd(KC_CMD_WRITE);	/* write new ctlr command byte */
+	kd_senddata(k_comm);
+	kd_initialized = TRUE;
+
+#ifdef ENABLE_IMMEDIATE_CONSOLE
+	/* Now that we're set up, we no longer need or want the
+           immediate console.  */
+	{
+		extern int immediate_console_enable;
+		immediate_console_enable = 0;
+	}
+
+	/* The immediate console printed stuff at the bottom of the
+	   screen rather than at the cursor position, so that's where
+	   we should start.  */
+	kd_setpos(ONE_PAGE - ONE_LINE); printf("\n");
+#endif
+
+	cnsetleds(kd_state = KS_NORMAL);
+					/* clear the LEDs AFTER we
+					   enable the keyboard controller.
+					   This keeps NUM-LOCK from being
+					   set on the NEC Versa. */
+}
+
+/*
+ * kd_belloff:
+ *
+ *	This routine shuts the bell off, by sending the appropriate code
+ *	to the speaker port.
+ *
+ * input	: None
+ * output	: bell is turned off
+ *
+ */
+static unsigned int kd_bellstate = 0;
+kd_belloff()
+{
+	unsigned char status;
+
+	status = (inb(K_PORTB) & ~(K_SPKRDATA | K_ENABLETMR2));
+	outb(K_PORTB, status);
+	kd_bellstate = 0;
+	return;
+}
+
+
+/*
+ * kd_bellon:
+ *
+ *	This routine turns the bell on.
+ *
+ * input	: None
+ * output	: bell is turned on
+ *
+ */
+kd_bellon()
+{
+	unsigned char	status;
+
+	/* program timer 2 */
+	outb(K_TMRCTL, K_SELTMR2 | K_RDLDTWORD | K_TSQRWAVE | K_TBINARY);
+	outb(K_TMR2, 1500 & 0xff);	/* LSB */
+	outb(K_TMR2, (int)1500 >> 8);	/* MSB */
+
+	/* start speaker - why must we turn on K_SPKRDATA? */
+	status = (inb(K_PORTB)| K_ENABLETMR2 | K_SPKRDATA);
+	outb(K_PORTB, status);
+	return;
+}
+
+/*
+ *
+ * Function kd_putc():
+ *
+ *	This function simply puts a character on the screen.  It does some
+ *	special processing for linefeed, carriage return, backspace and
+ *	the bell.
+ *
+ * input	: character to be displayed
+ * output	: character is displayed, or some action is taken
+ *
+ */
+int sit_for_0 = 1;
+
+kd_putc(ch)
+u_char	ch;
+{
+	if ((!ch) && sit_for_0)
+		return;
+
+	switch (ch) { 
+	case ((K_LF)):
+		kd_down();
+		break;
+	case ((K_CR)):  
+		kd_cr();
+		break;
+	case ((K_BS)):
+		kd_left();
+		break;
+	case ((K_HT)):
+		kd_tab();
+		break;
+	case ((K_BEL)):
+		/*
+		 * Similar problem to K_BS here (behavior might depend
+		 * on tty setting).  Also check LF and CR.
+		 */
+	        if (!kd_bellstate)
+		  {
+		    kd_bellon();
+		    timeout(kd_belloff, 0, hz/8 );
+		    kd_bellstate = 1;
+		  }
+		break;
+	default:
+		(*kd_dput)(kd_curpos, ch, kd_attr);
+		kd_right();
+		break;
+	}
+	return;
+}
+
+
+/*
+ * kd_setpos:
+ *
+ *	This function sets the software and hardware cursor position
+ *	on the screen, using device-specific code to actually move and
+ *	display the cursor.
+ *
+ * input	: position on (or off) screen to move the cursor to
+ * output	: cursor position is updated, screen has been scrolled
+ *		  if necessary to bring cursor position back onto
+ *		  screen.
+ *
+ */
+kd_setpos(newpos)
+csrpos_t newpos;
+{
+	if (newpos > ONE_PAGE) {
+		kd_scrollup();
+		newpos = BOTTOM_LINE;
+	}
+	if (newpos < 0) {
+		kd_scrolldn();
+		newpos = 0;
+	}
+
+	(*kd_dsetcursor)(newpos);
+}
+
+
+/*
+ * kd_scrollup:
+ *
+ *	This function scrolls the screen up one line using a DMA memory
+ *	copy.
+ *
+ * input	: None
+ * output	: lines on screen appear to be shifted up one line
+ *
+ */
+kd_scrollup()
+{
+	csrpos_t to;
+	csrpos_t from;
+	int	count;
+
+	/* scroll up */
+	to = 0;
+	from = ONE_LINE;
+	count = (ONE_PAGE - ONE_LINE)/ONE_SPACE;
+	(*kd_dmvup)(from, to, count);
+
+	/* clear bottom line */
+	to = BOTTOM_LINE;
+	count = ONE_LINE/ONE_SPACE;
+	(*kd_dclear)(to, count, kd_attr);
+	return;
+}
+
+
+/*
+ * kd_scrolldn:
+ *
+ *	Scrolls the characters on the screen down one line.
+ *
+ * input	: None
+ * output	: Lines on screen appear to be moved down one line
+ *
+ */
+kd_scrolldn()
+{
+	csrpos_t to;
+	csrpos_t from;
+	int	count;
+
+	/* move down */
+	to 	= ONE_PAGE - ONE_SPACE;
+	from 	= ONE_PAGE - ONE_LINE - ONE_SPACE;
+	count 	= (ONE_PAGE - ONE_LINE) / ONE_SPACE;
+	(*kd_dmvdown)(from, to, count);
+
+	/* clear top line */
+	to	= 0;
+	count	= ONE_LINE/ONE_SPACE;
+	(*kd_dclear)(to, count, kd_attr);
+	return;
+	
+}
+
+
+/*
+ * kd_parseesc:
+ *
+ *	This routine begins the parsing of an escape sequence.  It uses the
+ *	escape sequence array and the escape spot pointer to handle 
+ *	asynchronous parsing of escape sequences.
+ *
+ * input	: String of characters prepended by an escape
+ * output	: Appropriate actions are taken depending on the string as
+ *		  defined by the ansi terminal specification
+ *
+ */
+kd_parseesc()
+{
+	u_char	*escp;
+
+	escp = esc_seq + 1;		/* point to char following ESC */
+	switch(*(escp)) {
+	case 'c':
+		kd_cls();
+		kd_home();
+		esc_spt = esc_seq;  /* reset spot in ESC sequence */
+		break;
+	case '[':
+		escp++;
+		kd_parserest(escp);
+		break;
+	case '\0':
+		break;			/* not enough info yet	*/
+	default:
+		kd_putc(*escp);
+		esc_spt = esc_seq;	/* inv sequence char, reset */
+		break;
+	}
+	return;
+
+}
+
+
+/*
+ * kd_parserest:
+ *
+ *	This function will complete the parsing of an escape sequence and
+ *	call the appropriate support routine if it matches a character.  This
+ *	function could be greatly improved by using a function jump table, and
+ *	removing this bulky switch statement.
+ *
+ * input	: An string
+ * output	: Appropriate action based on whether the string matches a
+ *	 	  sequence acceptable to the ansi terminal specification
+ *
+ */
+kd_parserest(cp)
+u_char	*cp;
+{
+	int	number;
+	csrpos_t newpos;
+
+	cp += kd_atoi(cp, &number);
+	switch(*cp) {
+	case 'm':
+		switch(number) {
+		case DEFAULT:
+		case 0:
+			kd_attr = KA_NORMAL;
+			break;
+		case 7:
+			kd_attr = KA_REVERSE;
+			break;
+		default:
+			kd_attr = KA_NORMAL;
+			break;
+		}
+		esc_spt = esc_seq;
+		break;
+	case '@':
+		if (number == DEFAULT)
+			kd_insch(1);
+		else
+			kd_insch(number);
+		esc_spt = esc_seq;
+		break;
+	case 'H':
+		kd_home();
+		esc_spt = esc_seq;
+		break;
+	case 'A':
+		if (number == DEFAULT)
+			kd_up();
+		else
+			while (number--)
+				kd_up();
+		esc_spt = esc_seq;
+		break;
+	case 'B':
+		if (number == DEFAULT)
+			kd_down();
+		else
+			while (number--)
+				kd_down();
+		esc_spt = esc_seq;
+		break;
+	case 'C':
+		if (number == DEFAULT)
+			kd_right();
+		else
+			while (number--)
+				kd_right();
+		esc_spt = esc_seq;
+		break;
+	case 'D':
+		if (number == DEFAULT)
+			kd_left();
+		else
+			while (number--)
+				kd_left();
+		esc_spt = esc_seq;
+		break;
+	case 'E':
+		kd_cr();
+		if (number == DEFAULT)
+			kd_down();
+		else
+			while (number--)
+				kd_down();
+		esc_spt = esc_seq;
+		break;
+	case 'F':
+		kd_cr();
+		if (number == DEFAULT)
+			kd_up();
+		else
+			while (number--)
+				kd_up();
+		esc_spt = esc_seq;
+		break;
+	case 'G':
+		if (number == DEFAULT)
+			number = 0;
+		else
+			if (number > 0)
+				--number;	/* because number is from 1 */
+		kd_setpos(BEG_OF_LINE(kd_curpos) + number * ONE_SPACE);
+		esc_spt = esc_seq;
+		break;
+	case ';':
+		++cp;
+		if (*cp == '\0')
+			break;			/* not ready yet */
+		if (number == DEFAULT)
+			number = 0;
+		else
+			if (number > 0)
+				--number;		/* numbered from 1 */
+		newpos = (number * ONE_LINE);   /* setup row */
+		cp += kd_atoi(cp, &number);
+		if (*cp == '\0')
+			break;			/* not ready yet */
+		if (number == DEFAULT)
+			number = 0;
+		else if (number > 0)
+			number--;
+		newpos += (number * ONE_SPACE);	/* setup column */
+		if (newpos < 0)
+			newpos = 0;		/* upper left */
+		if (newpos > ONE_PAGE)
+			newpos = (ONE_PAGE - ONE_SPACE); 
+		/* lower right */
+		if (*cp == '\0')
+			break;			/* not ready yet */
+		if (*cp == 'H') {
+			kd_setpos(newpos);
+			esc_spt = esc_seq;	/* done, reset */
+		}	
+		else
+			esc_spt = esc_seq;
+		break;				/* done or not ready */
+	case 'J':
+		switch(number) {
+		case DEFAULT:
+		case 0:
+			kd_cltobcur();	/* clears from current
+					   pos to bottom.
+					   */	
+			break;
+		case 1:
+			kd_cltopcur();	/* clears from top to
+					   current pos.
+					   */	
+			break;
+		case 2:
+			kd_cls();
+			break;
+		default:
+			break;
+		}
+		esc_spt = esc_seq;		/* reset it */
+		break;
+	case 'K':
+		switch(number) {
+		case DEFAULT:
+		case 0:
+			kd_cltoecur();	/* clears from current
+					   pos to eoln.
+					   */	
+			break;
+		case 1:
+			kd_clfrbcur();	/* clears from begin
+					   of line to current
+					   pos.
+					   */
+			break;
+		case 2:
+			kd_eraseln();	/* clear entire line */
+			break;
+		default:
+			break;
+		}
+		esc_spt = esc_seq;
+		break;
+	case 'L':
+		if (number == DEFAULT)
+			kd_insln(1);
+		else
+			kd_insln(number);
+		esc_spt = esc_seq;
+		break;
+	case 'M':
+		if (number == DEFAULT)
+			kd_delln(1);
+		else
+			kd_delln(number);
+		esc_spt = esc_seq;
+		break;
+	case 'P':
+		if (number == DEFAULT)
+			kd_delch(1);
+		else
+			kd_delch(number);
+		esc_spt = esc_seq;
+		break;
+	case 'S':
+		if (number == DEFAULT)
+			kd_scrollup();
+		else
+			while (number--)
+				kd_scrollup();
+		esc_spt = esc_seq;
+		break;
+	case 'T':
+		if (number == DEFAULT)
+			kd_scrolldn();
+		else
+			while (number--)
+				kd_scrolldn();
+		esc_spt = esc_seq;
+		break;
+	case 'X':
+		if (number == DEFAULT)
+			kd_erase(1);
+		else
+			kd_erase(number);
+		esc_spt = esc_seq;
+		break;	
+	case '\0':
+		break;			/* not enough yet */
+	default:
+		kd_putc(*cp);		/* show inv character */
+		esc_spt = esc_seq;	/* inv entry, reset */
+		break;
+	}
+	return;
+}
+
+/*
+ * kd_atoi:
+ *
+ *	This function converts an ascii string into an integer, and
+ *	returns DEFAULT if no integer was found.  Note that this is why
+ *	we don't use the regular atio(), because ZERO is ZERO and not
+ *	the DEFAULT in all cases.
+ *
+ * input	: string
+ * output	: a number or possibly DEFAULT, and the count of characters
+ *		  consumed by the conversion
+ *
+ */
+int
+kd_atoi(cp, nump)
+u_char	*cp;
+int	*nump;
+{
+	int	number;
+	u_char	*original;
+
+	original = cp;
+	for (number = 0; ('0' <= *cp) && (*cp <= '9'); cp++)
+		number = (number * 10) + (*cp - '0');
+	if (original == cp)
+		*nump = DEFAULT;
+	else
+		*nump = number;
+	return(cp - original);
+}
+
+kd_tab()
+{
+    int i;
+
+    for (i = 8 - (CURRENT_COLUMN(kd_curpos) % 8); i > 0; i--) {
+	kd_putc(' ');
+    }
+
+}
+
+
+/*
+ * kd_cls:
+ *
+ *	This function clears the screen with spaces and the current attribute.
+ *
+ * input	: None
+ * output	: Screen is cleared
+ *
+ */
+kd_cls()
+{
+	(*kd_dclear)(0, ONE_PAGE/ONE_SPACE, kd_attr);
+	return;
+}
+
+
+/*
+ * kd_home:
+ *
+ *	This function will move the cursor to the home position on the screen,
+ *	as well as set the internal cursor position (kd_curpos) to home.
+ *
+ * input	: None
+ * output	: Cursor position is moved
+ *
+ */
+kd_home()
+{
+	kd_setpos(0);
+	return;
+}
+
+
+/*
+ * kd_up:
+ *
+ *	This function moves the cursor up one line position.
+ *
+ * input	: None
+ * output	: Cursor moves up one line, or screen is scrolled
+ *
+ */
+kd_up()
+{
+	if (kd_curpos < ONE_LINE)
+		kd_scrolldn();
+	else
+		kd_setpos(kd_curpos - ONE_LINE);
+	return;
+}
+
+
+/*
+ * kd_down:
+ *
+ *	This function moves the cursor down one line position.
+ *
+ * input	: None
+ * output	: Cursor moves down one line or the screen is scrolled
+ *
+ */
+kd_down()
+{
+	if (kd_curpos >= (ONE_PAGE - ONE_LINE))
+		kd_scrollup();
+	else
+		kd_setpos(kd_curpos + ONE_LINE);
+	return;
+}
+
+
+/*
+ * kd_right:
+ *
+ *	This function moves the cursor one position to the right.
+ *
+ * input	: None
+ * output	: Cursor moves one position to the right
+ *
+ */
+kd_right()
+{
+	if (kd_curpos < (ONE_PAGE - ONE_SPACE))
+		kd_setpos(kd_curpos + ONE_SPACE);
+	else {
+		kd_scrollup();
+		kd_setpos(BEG_OF_LINE(kd_curpos));
+	}
+	return;
+}
+
+
+/*
+ * kd_left:
+ *
+ *	This function moves the cursor one position to the left.
+ *
+ * input	: None
+ * output	: Cursor moves one position to the left
+ *
+ */
+kd_left()
+{
+	if (0 < kd_curpos)
+		kd_setpos(kd_curpos - ONE_SPACE);
+	return;
+}
+
+
+/*
+ * kd_cr:
+ *
+ *	This function moves the cursor to the beginning of the current
+ *	line.
+ *
+ * input	: None
+ * output	: Cursor moves to the beginning of the current line
+ *
+ */
+kd_cr()
+{
+	kd_setpos(BEG_OF_LINE(kd_curpos));
+	return;
+}
+
+
+/*
+ * kd_cltobcur:
+ *
+ *	This function clears from the current cursor position to the bottom
+ *	of the screen.
+ *
+ * input	: None
+ * output	: Screen is cleared from current cursor postion to bottom
+ *
+ */
+kd_cltobcur()
+{
+	csrpos_t start;
+	int	count;
+
+	start = kd_curpos;
+	count = (ONE_PAGE - kd_curpos)/ONE_SPACE;
+	(*kd_dclear)(start, count, kd_attr);
+	return;
+}
+
+
+/*
+ * kd_cltopcur:
+ *
+ *	This function clears from the current cursor position to the top
+ *	of the screen.
+ *
+ * input	: None
+ * output	: Screen is cleared from current cursor postion to top
+ *
+ */
+kd_cltopcur()
+{
+	int	count;
+
+	count = (kd_curpos + ONE_SPACE) / ONE_SPACE;
+	(*kd_dclear)(0, count, kd_attr);
+	return;
+}
+
+
+/*
+ * kd_cltoecur:
+ *
+ *	This function clears from the current cursor position to eoln. 
+ *
+ * input	: None
+ * output	: Line is cleared from current cursor position to eoln
+ *
+ */
+kd_cltoecur()
+{
+	csrpos_t i;
+	csrpos_t hold;
+
+	hold = BEG_OF_LINE(kd_curpos) + ONE_LINE;
+	for (i = kd_curpos; i < hold; i += ONE_SPACE) {
+		(*kd_dput)(i, K_SPACE, kd_attr);
+	}
+}
+
+
+/*
+ * kd_clfrbcur:
+ *
+ *	This function clears from the beginning of the line to the current
+ *	cursor position.
+ *
+ * input	: None
+ * output	: Line is cleared from beginning to current position
+ *
+ */
+kd_clfrbcur()
+{
+	csrpos_t i;
+
+	for (i = BEG_OF_LINE(kd_curpos); i <= kd_curpos; i += ONE_SPACE) {
+		(*kd_dput)(i, K_SPACE, kd_attr);
+	}
+}
+
+
+/*
+ * kd_delln:
+ *
+ *	This function deletes 'number' lines on the screen by effectively
+ *	scrolling the lines up and replacing the old lines with spaces.
+ *
+ * input	: number of lines to delete
+ * output	: lines appear to be deleted
+ *
+ */
+kd_delln(number)
+int	number;
+{
+	csrpos_t to;
+	csrpos_t from;
+	int	delbytes;		/* num of bytes to delete */
+	int	count;			/* num of words to move or fill */
+
+	if (number <= 0)
+		return;
+
+	delbytes = number * ONE_LINE;
+	to = BEG_OF_LINE(kd_curpos);
+	if (to + delbytes >= ONE_PAGE)
+		delbytes = ONE_PAGE - to;
+	if (to + delbytes < ONE_PAGE) {
+		from = to + delbytes;
+		count = (ONE_PAGE - from) / ONE_SPACE;
+		(*kd_dmvup)(from, to, count);
+	}
+
+	to = ONE_PAGE - delbytes;
+	count = delbytes / ONE_SPACE;
+	(*kd_dclear)(to, count, kd_attr);
+	return;
+}
+
+
+/*
+ * kd_insln:
+ *
+ *	This function inserts a line above the current one by
+ *	scrolling the current line and all the lines below it down.
+ *
+ * input	: number of lines to insert
+ * output	: New lines appear to be inserted
+ *
+ */
+kd_insln(number)
+int	number;
+{
+	csrpos_t to;
+	csrpos_t from;
+	int	count;
+	csrpos_t top;			/* top of block to be moved */
+	int	insbytes;		/* num of bytes inserted */
+
+	if (number <= 0)
+		return;
+
+	top = BEG_OF_LINE(kd_curpos);
+	insbytes = number * ONE_LINE;
+	if (top + insbytes > ONE_PAGE)
+		insbytes = ONE_PAGE - top;
+	to = ONE_PAGE - ONE_SPACE;
+	from = to - insbytes;
+	if (from > top) {
+		count = (from - top + ONE_SPACE) / ONE_SPACE;
+		(*kd_dmvdown)(from, to, count);
+	}
+
+	count = insbytes / ONE_SPACE;
+	(*kd_dclear)(top, count, kd_attr);
+	return;
+}
+
+
+/*
+ * kd_delch:
+ *
+ *	This function deletes a number of characters from the current 
+ *	position in the line.
+ *
+ * input	: number of characters to delete
+ * output	: characters appear to be deleted
+ *
+ */
+kd_delch(number)
+int	number;
+{
+	int	count;			/* num words moved/filled */
+	int	delbytes;		/* bytes to delete */
+	register csrpos_t to;
+	csrpos_t from;
+	csrpos_t nextline;		/* start of next line */
+
+	if (number <= 0)
+		return;
+
+	nextline = BEG_OF_LINE(kd_curpos) + ONE_LINE;
+	delbytes = number * ONE_SPACE;
+	if (kd_curpos + delbytes > nextline)
+		delbytes = nextline - kd_curpos;
+	if (kd_curpos + delbytes < nextline) {
+		from = kd_curpos + delbytes;
+		to = kd_curpos;
+		count = (nextline - from) / ONE_SPACE;
+		(*kd_dmvup)(from, to, count);
+	}
+
+	to = nextline - delbytes;
+	count = delbytes / ONE_SPACE;
+	(*kd_dclear)(to, count, kd_attr);
+	return;
+
+}
+
+
+/*
+ * kd_erase:
+ *
+ *	This function overwrites characters with a space starting with the
+ *	current cursor position and ending in number spaces away.
+ *
+ * input	: number of characters to erase
+ * output	: characters appear to be blanked or erased
+ *
+ */
+kd_erase(number)
+int	number;
+{
+	csrpos_t i;
+	csrpos_t stop;
+
+	stop = kd_curpos + (ONE_SPACE * number);	
+	if (stop > BEG_OF_LINE(kd_curpos) + ONE_LINE)
+		stop = BEG_OF_LINE(kd_curpos) + ONE_LINE;
+	for (i = kd_curpos; i < stop; i += ONE_SPACE) {
+		(*kd_dput)(i, K_SPACE, kd_attr);
+	}
+	return;
+}
+
+
+/*
+ * kd_eraseln:
+ *
+ *	This function erases the current line with spaces.
+ *
+ * input	: None
+ * output	: Current line is erased
+ *
+ */
+kd_eraseln()
+{
+	csrpos_t i;
+	csrpos_t stop;
+
+	stop = BEG_OF_LINE(kd_curpos) + ONE_LINE;
+	for (i = BEG_OF_LINE(kd_curpos); i < stop; i += ONE_SPACE) {	
+		(*kd_dput)(i, K_SPACE, kd_attr);
+	}
+	return;
+}
+
+
+/*
+ * kd_insch:
+ *
+ *	This function inserts a blank at the current cursor position
+ *	and moves all other characters on the line over.
+ *
+ * input	: number of blanks to insert
+ * output	: Blanks are inserted at cursor position
+ *
+ */
+kd_insch(number)
+int	number;
+{
+	csrpos_t to;
+	csrpos_t from;
+	int	count;
+	csrpos_t nextline;		/* start of next line */
+	int	insbytes;		/* num of bytes inserted */
+
+	if (number <= 0)
+		return;
+
+	nextline = BEG_OF_LINE(kd_curpos) + ONE_LINE;
+	insbytes = number * ONE_SPACE;
+	if (kd_curpos + insbytes > nextline)
+		insbytes = nextline - kd_curpos;
+
+	to = nextline - ONE_SPACE;
+	from = to - insbytes;
+	if (from >= kd_curpos) {
+		count = (from - kd_curpos + ONE_SPACE) / ONE_SPACE;
+		(*kd_dmvdown)(from, to, count);
+	}
+
+	count = insbytes / ONE_SPACE;
+	(*kd_dclear)(kd_curpos, count, kd_attr);
+	return;
+}
+
+
+/*
+ * kd_isupper, kd_islower:
+ *
+ *	Didn't want to include ctype.h because it brings in stdio.h, and
+ *	only want to see if the darn character is uppercase or lowercase.
+ *
+ * input	: Character 'c'
+ * output	: isuuper gives TRUE if character is uppercase, islower
+ *		  returns TRUE if character is lowercase
+ *
+ */
+kd_isupper(c)
+u_char	c;
+{
+	if (('A' <= c) && (c <= 'Z'))
+		return(TRUE);
+	return(FALSE);
+}
+
+kd_islower(c)
+u_char	c;
+{
+	if (('a' <= c) && (c <= 'z'))
+		return(TRUE);
+	return(FALSE);
+}
+
+/*
+ * kd_senddata:
+ *
+ *	This function sends a byte to the keyboard RDWR port, but
+ *	first waits until the input/output data buffer is clear before
+ *	sending the data.  Note that this byte can be either data or a
+ *	keyboard command.
+ *
+ */
+kd_senddata(ch)
+unsigned char	ch;
+{
+	while (inb(K_STATUS) & K_IBUF_FUL);
+	outb(K_RDWR, ch);
+	last_sent = ch;
+	return;
+}
+
+/*
+ * kd_sendcmd:
+ *
+ *	This function sends a command byte to the keyboard command
+ *	port, but first waits until the input/output data buffer is
+ *	clear before sending the data.
+ *
+ */
+kd_sendcmd(ch)
+unsigned char	ch;
+{
+	while (inb(K_STATUS) & K_IBUF_FUL);
+	outb(K_CMD, ch);
+	return;
+}
+
+
+/* 
+ * kd_getdata:
+ * 
+ *	This function returns a data byte from the keyboard RDWR port, 
+ *	after waiting until the port is flagged as having something to 
+ *	read. 
+ */
+unsigned char
+kd_getdata()
+{
+	while ((inb(K_STATUS) & K_OBUF_FUL) == 0);
+	return(inb(K_RDWR));
+}
+
+kd_cmdreg_read()
+{
+int ch=KC_CMD_READ;
+
+	while (inb(K_STATUS) & K_IBUF_FUL);
+	outb(K_CMD, ch);
+
+	while ((inb(K_STATUS) & K_OBUF_FUL) == 0);
+	return(inb(K_RDWR));
+}
+
+kd_cmdreg_write(val)
+{
+int ch=KC_CMD_WRITE;
+
+	while (inb(K_STATUS) & K_IBUF_FUL);
+	outb(K_CMD, ch);
+
+	while (inb(K_STATUS) & K_IBUF_FUL);
+	outb(K_RDWR, val);
+}
+
+kd_mouse_drain()
+{
+	int i;
+	while(inb(K_STATUS) & K_IBUF_FUL);
+	while((i = inb(K_STATUS)) & K_OBUF_FUL)
+		printf("kbd: S = %x D = %x\n", i, inb(K_RDWR));
+}
+
+/* 
+ * set_kd_state:
+ * 
+ *	Set kd_state and update the keyboard status LEDs.
+ */
+
+set_kd_state(newstate)
+int newstate;
+{
+	kd_state = newstate;
+	kd_setleds1(state2leds(newstate));
+}
+
+/* 
+ * state2leds:
+ * 
+ *	Return a byte containing LED settings for the keyboard, given 
+ *	a state vector.
+ */
+u_char
+state2leds(state)
+int	state;
+{
+	u_char result = 0;
+
+	if (state & KS_NLKED)
+		result |= K_LED_NUMLK;
+	if (state & KS_CLKED)
+		result |= K_LED_CAPSLK;
+	return(result);
+}
+
+/* 
+ * kd_setleds[12]:
+ * 
+ *	Set the keyboard LEDs according to the given byte.  
+ */
+kd_setleds1(val)
+u_char val;
+{
+	if (kd_ack != NOT_WAITING) {
+		printf("kd_setleds1: unexpected state (%d)\n", kd_ack);
+		return;
+	}
+
+	kd_ack = SET_LEDS;
+	kd_nextled = val;
+	kd_senddata(K_CMD_LEDS);
+}
+
+kd_setleds2()
+{
+	kd_senddata(kd_nextled);
+}
+
+
+/* 
+ * cnsetleds:
+ * 
+ *	like kd_setleds[12], but not interrupt-based.
+ *	Currently disabled because cngetc ignores caps lock and num 
+ *	lock anyway.
+ */
+cnsetleds(val)
+u_char val;
+{
+	kd_senddata(K_CMD_LEDS);
+	(void)kd_getdata();		/* XXX - assume is ACK */
+	kd_senddata(val);
+	(void)kd_getdata();		/* XXX - assume is ACK */
+}
+
+kdreboot()
+{
+	(*kd_dreset)();
+
+#ifndef BROKEN_KEYBOARD_RESET
+	kd_sendcmd(0xFE);		/* XXX - magic # */
+	delay(1000000);			/* wait to see if anything happens */
+#endif
+
+	/* 
+	 * If that didn't work, then we'll just have to try and
+	 * do it the hard way. 
+	 */
+	cpu_shutdown();
+}
+
+static int which_button[] = {0, MOUSE_LEFT, MOUSE_MIDDLE, MOUSE_RIGHT};
+static struct mouse_motion moved;
+
+kd_kbd_magic(scancode)
+{
+int new_button = 0;
+
+	if (kd_kbd_mouse == 2)
+		printf("sc = %x\n", scancode);
+
+	switch (scancode) {
+/* f1 f2 f3 */
+	case 0x3d:
+		new_button++;
+	case 0x3c:
+		new_button++;
+	case 0x3b:
+		new_button++;
+		if (kd_kbd_magic_button && (new_button != kd_kbd_magic_button)) {
+				/* down w/o up */
+			mouse_button(which_button[kd_kbd_magic_button], 1);
+		}
+				/* normal */
+		if (kd_kbd_magic_button == new_button) {
+			mouse_button(which_button[new_button], 1);
+			kd_kbd_magic_button = 0;
+		} else {
+			mouse_button(which_button[new_button], 0);
+			kd_kbd_magic_button = new_button;
+		}
+		break;
+
+/* right left up down */
+	case 0x4d:
+		moved.mm_deltaX = kd_kbd_magic_scale;
+		moved.mm_deltaY = 0;
+		mouse_moved(moved);
+		break;
+	case 0x4b:
+		moved.mm_deltaX = -kd_kbd_magic_scale;
+		moved.mm_deltaY = 0;
+		mouse_moved(moved);
+		break;
+	case 0x48:
+		moved.mm_deltaX = 0;
+		moved.mm_deltaY = kd_kbd_magic_scale;
+		mouse_moved(moved);
+		break;
+	case 0x50:
+		moved.mm_deltaX = 0;
+		moved.mm_deltaY = -kd_kbd_magic_scale;
+		mouse_moved(moved);
+		break;
+/* home pageup end pagedown */
+	case 0x47:
+		moved.mm_deltaX = -2*kd_kbd_magic_scale;
+		moved.mm_deltaY = 2*kd_kbd_magic_scale;
+		mouse_moved(moved);
+		break;
+	case 0x49:
+		moved.mm_deltaX = 2*kd_kbd_magic_scale;
+		moved.mm_deltaY = 2*kd_kbd_magic_scale;
+		mouse_moved(moved);
+		break;
+	case 0x4f:
+		moved.mm_deltaX = -2*kd_kbd_magic_scale;
+		moved.mm_deltaY = -2*kd_kbd_magic_scale;
+		mouse_moved(moved);
+		break;
+	case 0x51:
+		moved.mm_deltaX = 2*kd_kbd_magic_scale;
+		moved.mm_deltaY = -2*kd_kbd_magic_scale;
+		mouse_moved(moved);
+		break;
+
+	default:
+		return 0;
+	}
+	return 1;
+}
+
+
+
+/*
+ * Code specific to EGA/CGA/VGA boards.  This code relies on the fact
+ * that the "slam" functions take a word count and ONE_SPACE takes up
+ * 1 word.
+ */
+#define	SLAMBPW	2			/* bytes per word for "slam" fcns */
+
+
+/*
+ * kd_xga_init:
+ *
+ *	Initialization specific to character-based graphics adapters.
+ */
+void
+kd_xga_init()
+{
+	csrpos_t	xga_getpos();
+	unsigned char	screen;
+
+	outb(CMOS_ADDR, CMOS_EB);
+	screen = inb(CMOS_DATA) & CM_SCRMSK;
+	switch(screen) {
+	case CM_EGA_VGA:
+		/*
+		 * Here we'll want to query to bios on the card
+		 * itself, because then we can figure out what
+		 * type we have exactly.  At this point we only
+		 * know that the card is NOT CGA or MONO.  For
+		 * now, however, we assume backwards compatibility
+		 * with 0xb8000 as the starting screen offset
+		 * memory location for these cards.
+		 *
+		 */
+		
+		vid_start = (u_char *)phystokv(EGA_START);
+		kd_index_reg = EGA_IDX_REG;
+		kd_io_reg = EGA_IO_REG;
+		kd_lines = 25;
+		kd_cols = 80;
+		kd_bitmap_start = 0xa0000; /* XXX - magic numbers */
+		{		/* XXX - is there a cleaner way to do this? */
+		    char *addr = (char *)phystokv(kd_bitmap_start);
+		    int i;
+		    for (i = 0; i < 200; i++)
+			addr[i] = 0x00;
+		}
+		break;
+	case CM_CGA_40:
+		vid_start = (u_char *)phystokv(CGA_START);
+		kd_index_reg = CGA_IDX_REG;
+		kd_io_reg = CGA_IO_REG;
+		kd_lines = 25;
+		kd_cols = 40;
+		break;
+	case CM_CGA_80:
+		vid_start = (u_char *)phystokv(CGA_START);
+		kd_index_reg = CGA_IDX_REG;
+		kd_io_reg = CGA_IO_REG;
+		kd_lines = 25;
+		kd_cols = 80;
+		break;
+	case CM_MONO_80:
+		vid_start = (u_char *)phystokv(MONO_START);
+		kd_index_reg = MONO_IDX_REG;
+		kd_io_reg = MONO_IO_REG;
+		kd_lines = 25;
+		kd_cols = 80;
+		break;
+	default:
+		printf("kd: unknown screen type, defaulting to EGA\n");
+	}
+
+	kd_setpos(xga_getpos());
+}
+
+
+/*
+ * xga_getpos:
+ *
+ *	This function returns the current hardware cursor position on the
+ *	screen, scaled for compatibility with kd_curpos.
+ *
+ * input	: None
+ * output	: returns the value of cursor position on screen
+ *
+ */
+csrpos_t
+xga_getpos()
+
+{
+	unsigned char	low;
+	unsigned char	high;
+	short pos;
+
+	outb(kd_index_reg, C_HIGH);
+	high = inb(kd_io_reg);
+	outb(kd_index_reg, C_LOW);
+	low = inb(kd_io_reg);
+	pos = (0xff&low) + ((unsigned short)high<<8);
+
+	return(ONE_SPACE * (csrpos_t)pos);
+}
+
+
+/*
+ * charput:
+ *
+ *	Put attributed character for EGA/CGA/etc.
+ */
+static void
+charput(pos, ch, chattr)
+csrpos_t pos;				/* where to put it */
+char	ch;				/* the character */
+char	chattr;				/* its attribute */
+{
+	*(vid_start + pos) = ch;
+	*(vid_start + pos + 1) = chattr;
+}
+
+
+/*
+ * charsetcursor:
+ *
+ *	Set hardware cursor position for EGA/CGA/etc.
+ */
+static void
+charsetcursor(newpos)
+csrpos_t newpos;
+{
+	short curpos;		/* position, not scaled for attribute byte */
+
+    	curpos = newpos / ONE_SPACE;
+    	outb(kd_index_reg, C_HIGH);
+    	outb(kd_io_reg, (u_char)(curpos>>8));
+    	outb(kd_index_reg, C_LOW);
+    	outb(kd_io_reg, (u_char)(curpos&0xff));
+
+	kd_curpos = newpos;
+}
+
+
+/*
+ * charmvup:
+ *
+ *	Block move up for EGA/CGA/etc.
+ */
+static void
+charmvup(from, to, count)
+csrpos_t from, to;
+int count;
+{
+	kd_slmscu(vid_start+from, vid_start+to, count);
+}
+
+
+/*
+ * charmvdown:
+ *
+ *	Block move down for EGA/CGA/etc.
+ */
+static void
+charmvdown(from, to, count)
+csrpos_t from, to;
+int count;
+{
+	kd_slmscd(vid_start+from, vid_start+to, count);
+}
+
+
+/*
+ * charclear:
+ *
+ *	Fast clear for CGA/EGA/etc.
+ */
+static void
+charclear(to, count, chattr)
+csrpos_t to;
+int	count;
+char	chattr;
+{
+	kd_slmwd(vid_start+to, count, ((unsigned short)chattr<<8)+K_SPACE);
+}
+
+
+/* 
+ * kd_noopreset:
+ * 
+ * 	No-op reset routine for kd_dreset.
+ */
+static void
+kd_noopreset()
+{
+}
+
+
+
+/*
+ * Generic routines for bitmap devices (i.e., assume no hardware
+ * assist).  Assumes a simple byte ordering (i.e., a byte at a lower
+ * address is to the left of the byte at the next higher address).
+ * For the 82786, this works anyway if the characters are 2 bytes
+ * wide.  (more bubble gum and paper clips.)
+ *
+ * See the comments above about SLAMBPW.
+ */
+
+void	bmpch2bit(), bmppaintcsr();
+u_char	*bit2fbptr();
+
+
+/*
+ * bmpput: Copy a character from the font to the frame buffer.
+ */
+
+void
+bmpput(pos, ch, chattr)
+csrpos_t pos;
+char	ch, chattr;
+{
+	short xbit, ybit;		/* u/l corner of char pos */
+	register u_char *to, *from;
+	register short i, j;
+	u_char mask = (chattr == KA_REVERSE ? 0xff : 0);
+
+	if ((u_char)ch >= chars_in_font)
+		ch = K_QUES;
+
+	bmpch2bit(pos, &xbit, &ybit);
+	to = bit2fbptr(xbit, ybit);
+	from = font_start + ch * char_byte_width;
+	for (i = 0; i < char_height; ++i) {
+		for (j = 0; j < char_byte_width; ++j)
+			*(to+j) = *(from+j) ^ mask;
+		to += fb_byte_width;
+		from += font_byte_width;
+	}
+}
+
+/*
+ * bmpcp1char: copy 1 char from one place in the frame buffer to
+ * another.
+ */
+void
+bmpcp1char(from, to)
+csrpos_t from, to;
+{
+	short from_xbit, from_ybit;
+	short to_xbit, to_ybit;
+	register u_char *tp, *fp;
+	register short i, j;
+
+	bmpch2bit(from, &from_xbit, &from_ybit);
+	bmpch2bit(to, &to_xbit, &to_ybit);
+
+	tp = bit2fbptr(to_xbit, to_ybit);
+	fp = bit2fbptr(from_xbit, from_ybit);
+
+	for (i = 0; i < char_height; ++i) {
+		for (j = 0; j < char_byte_width; ++j)
+			*(tp+j) = *(fp+j);
+		tp += fb_byte_width;
+		fp += fb_byte_width;
+	}
+}
+
+/*
+ * bmpvmup: Copy a block of character positions upwards.
+ */
+void
+bmpmvup(from, to, count)
+csrpos_t from, to;
+int	count;
+{
+	short from_xbit, from_ybit;
+	short to_xbit, to_ybit;
+	short i;
+
+	bmpch2bit(from, &from_xbit, &from_ybit);
+	bmpch2bit(to, &to_xbit, &to_ybit);
+
+	if (from_xbit == xstart && to_xbit == xstart && count%kd_cols == 0) {
+		/* fast case - entire lines */
+		from_xbit = to_xbit = 0;
+		bmppaintcsr(kd_curpos, char_black); /* don't copy cursor */
+		count /= kd_cols;	/* num lines */
+		count *= fb_byte_width * (char_height+cursor_height);
+		kd_slmscu(bit2fbptr(from_xbit, from_ybit),
+			  bit2fbptr(to_xbit, to_ybit), 
+			  count/SLAMBPW);
+		bmppaintcsr(kd_curpos, char_white);
+	} else {
+		/* slow case - everything else */
+		for (i=0; i < count; ++i) {
+			bmpcp1char(from, to);
+			from += ONE_SPACE;
+			to += ONE_SPACE;
+		}
+	}
+}
+
+/*
+ * bmpmvdown: copy a block of characters down.
+ */
+void
+bmpmvdown(from, to, count)
+csrpos_t from, to;
+int	count;
+{
+	short from_xbit, from_ybit;
+	short to_xbit, to_ybit;
+	short i;
+
+	bmpch2bit(from, &from_xbit, &from_ybit);
+	bmpch2bit(to, &to_xbit, &to_ybit);
+
+	if (from_xbit == xstart + (kd_cols - 1) * char_width
+	    && to_xbit == xstart + (kd_cols - 1) * char_width
+	    && count%kd_cols == 0) {
+		/* fast case - entire lines*/
+		from_xbit = to_xbit = 8 * (fb_byte_width - 1);
+					/* last byte on line */
+		bmppaintcsr(kd_curpos, char_black); /* don't copy cursor */
+		count /= kd_cols;	/* num lines */
+		count *= fb_byte_width * (char_height+cursor_height);
+		kd_slmscd(bit2fbptr(from_xbit, from_ybit),
+			  bit2fbptr(to_xbit, to_ybit),
+			  count/SLAMBPW);
+		bmppaintcsr(kd_curpos, char_white);
+	} else {
+		/* slow case - everything else */
+		for (i=0; i < count; ++i) {
+			bmpcp1char(from, to);
+			from -= ONE_SPACE;
+			to -= ONE_SPACE;
+		}
+	}
+}
+
+/*
+ * bmpclear: clear one or more character positions.
+ */
+void
+bmpclear(to, count, chattr)
+csrpos_t to;				/* 1st char */
+int	count;				/* num chars */
+char	chattr;				/* reverse or normal */
+{
+	register short i;
+	u_short clearval;
+	u_short clearbyte = (chattr == KA_REVERSE ? char_white : char_black);
+
+	clearval = (u_short)(clearbyte<<8) + clearbyte;
+	if (to == 0 && count >= kd_lines * kd_cols) {
+		/* fast case - entire page */
+		kd_slmwd(vid_start, (fb_byte_width * fb_height)/SLAMBPW,
+			 clearval);
+	} else 
+		/* slow case */
+		for (i = 0; i < count; ++i) {
+			bmpput(to, K_SPACE, chattr);
+			to += ONE_SPACE;
+		}
+}
+
+/*
+ * bmpsetcursor: update the display and set the logical cursor.
+ */
+void
+bmpsetcursor(pos)
+csrpos_t pos;
+{
+	/* erase old cursor & paint new one */
+	bmppaintcsr(kd_curpos, char_black);
+	bmppaintcsr(pos, char_white);
+	kd_curpos = pos;
+}
+
+/*
+ * bmppaintcsr: paint cursor bits.
+ */
+void
+bmppaintcsr(pos, val)
+csrpos_t pos;
+u_char	val;
+{
+	short xbit, ybit;
+	register u_char *cp;
+	register short line, byte;
+
+	bmpch2bit(pos, &xbit, &ybit);
+	ybit += char_height;		/* position at bottom of line */
+	cp = bit2fbptr(xbit, ybit);
+	for (line = 0; line < cursor_height; ++line) {
+		for (byte = 0; byte < char_byte_width; ++byte)
+			*(cp+byte) = val;
+		cp += fb_byte_width;
+	}
+}
+
+/*
+ * bmpch2bit: convert character position to x and y bit addresses.
+ * (0, 0) is the upper left corner.
+ */
+void
+bmpch2bit(pos, xb, yb)
+csrpos_t pos;
+short	*xb, *yb;			/* x, y bit positions, u/l corner */
+{
+	register short xch, ych;
+
+	xch = (pos / ONE_SPACE) % kd_cols;
+	ych = pos / (ONE_SPACE * kd_cols);
+	*xb = xstart + xch * char_width;
+	*yb = ystart + ych * (char_height + cursor_height);
+}
+
+/*
+ * bit2fbptr: return a pointer into the frame buffer corresponding to
+ * the bit address (x, y).
+ * Assumes that xb and yb don't point to the middle of a
+ * byte.
+ */
+u_char *
+bit2fbptr(xb, yb)
+short	xb, yb;
+{
+	return(vid_start + yb * fb_byte_width + xb/8);
+}
+
+
+/*
+ * console stuff
+ */
+
+/*
+ * XXX we assume that pcs *always* have a console
+ */
+int
+kdcnprobe(struct consdev *cp)
+{
+	int maj, unit, pri;
+
+	maj = 0;
+	unit = 0;
+	pri = CN_INTERNAL;
+	
+	cp->cn_dev = makedev(maj, unit);
+	cp->cn_pri = pri;
+}
+
+int
+kdcninit(struct consdev *cp)
+{
+	kdinit();
+	return 0;
+}
+
+int
+kdcngetc(dev_t dev, int wait)
+{
+	if (wait) {
+		int c;
+		while ((c = kdcnmaygetc()) < 0)
+			continue;
+		return c;
+	}
+	else
+		return kdcnmaygetc();
+}
+
+int
+kdcnputc(dev_t dev, int c)
+{
+	int	i;
+
+	if (!kd_initialized)
+		return;
+
+	/* Note that tab is handled in kd_putc */
+	if (c == '\n')
+		kd_putc('\r');
+	kd_putc(c);
+}
+
+/* 
+ * kdcnmaygetc:
+ * 
+ *	Get one character using polling, rather than interrupts.  Used 
+ *	by the kernel debugger.  Note that Caps Lock is ignored.
+ *	Normally this routine is called with interrupts already 
+ *	disabled, but there is code in place so that it will be more 
+ *	likely to work even if interrupts are turned on.
+ */
+int
+kdcnmaygetc(void)
+{
+	unsigned char	c;
+	unsigned char	scancode;
+	unsigned int	char_idx;
+#ifdef	notdef
+	spl_t	o_pri;
+#endif
+	boolean_t	up;
+
+	if (! kd_initialized)
+		return -1;
+
+	kd_extended = FALSE;
+#ifdef	notdef
+	o_pri = splhi();
+#endif
+	for ( ; ; ) {
+		if (!(inb(K_STATUS) & K_OBUF_FUL))
+			return -1;
+
+		up = FALSE;
+		/*
+		 * We'd come here for mouse events in debugger, if
+		 * the mouse were on.
+		 */
+		if ((inb(K_STATUS) & 0x20) == 0x20) {
+			printf("M%xP", inb(K_RDWR));
+			continue;
+		}
+		scancode = inb(K_RDWR);
+		/*
+		 * Handle extend modifier and
+		 * ack/resend, otherwise we may never receive
+		 * a key.
+		 */
+		if (scancode == K_EXTEND) {
+			kd_extended = TRUE;
+			continue;
+		} else if (scancode == K_RESEND) {
+  printf("cngetc: resend");
+			kd_resend();
+			continue;
+		} else if (scancode == K_ACKSC) {
+  printf("cngetc: handle_ack");
+			kd_handle_ack();
+			continue;
+		}
+		if (scancode & K_UP) {
+			up = TRUE;
+			scancode &= ~K_UP;
+		}
+		if (kd_kbd_mouse)
+			kd_kbd_magic(scancode);
+		if (scancode < NUMKEYS) {
+			/* Lookup in map, then process. */
+			char_idx = kdstate2idx(kd_state, kd_extended);
+			c = key_map[scancode][char_idx];
+			if (c == K_SCAN) {
+				c = key_map[scancode][++char_idx];
+				kd_state = do_modifier(kd_state, c, up);
+#ifdef notdef
+				cnsetleds(state2leds(kd_state));
+#endif
+			} else if (!up) {
+				/* regular key-down */
+				if (c == K_CR)
+					c = K_LF;
+#ifdef	notdef
+				splx(o_pri);
+#endif
+				return(c & 0177);
+			}
+		}
+	}
+}