2006-11-17 Constantine Kousoulos <wuwei@freemail.gr>

	    Thomas Schwinge  <tschwinge@gnu.org>

* i386/README-Drivers: Move most of the text into...
	* doc/mach.texi: ... here and update a number of things.
	(UPDATED): Don't override.

1 files changed, 5 insertions, 292 deletions

diff --git a/i386/README-Drivers b/i386/README-Drivers
index 042d048..3d1066c 100644
--- a/i386/README-Drivers
+++ b/i386/README-Drivers
@@ -1,46 +1,12 @@
 -*- text -*-
 
-** Turning on or off device drivers
+Here some i386 specific details of the device drivers are explained.
 
-Each device driver has an associated configure switch.  The table at the
-end of this file indicates whether a device driver is enabled by default
-or not.  It also gives --- if possible at all --- the configure switches
-to use for disabling or enabling device drivers, in case you're not
-satisfied with the default choices.  Where a `--disable-*' switch is
-given in the table, the device driver is enabled by default and you have
-to use the switch to disable it and vice versa for the `--enable-*'
-switches, the device driver is disabled by default and you have to us the
-switch to enable it.  To have all device drivers disabled that can be
-disabled and would otherwise have been enabled by default you can specify
-the `--disable-default-device-drivers' switch and then use the
-`--enable-*' switches to enable only those you actually want to have
-enabled.
+Each driver is followed by one or more triplets of three numbers.  These
+triplets specify combinations of I/O address, spl, and, pic that are believed
+to work.
 
-
-** What the configure switches do
-
-Each configure switch has two effects.  First, it defines a CPP symbol
-that turns on or off the hooks that autoconfigure the device and add
-it to the list of available devices.  Second, it adds the source code
-for the driver to a make variable so that the code for the driver is
-compiled and linked into the kernel.
-
-
-** What are those extra numbers
-
-Each driver is followed by one or more triplets of three numbers.
-These triplets specify combinations of I/O address, spl, and, pic that
-are believed to work. 
-
-
-** Then comes the name of the device to users.  %d is a unit number.
-
-
-** Source files
-
-All source file names are relative to [GNU Mach]/i386/i386at/ for
-Mach drivers, and the Linux drivers's files can be found below
-[GNU Mach]/linux/.
+Then comes the name of the device to users.  `%d' is a unit number.
 
 
 ** Table
@@ -52,7 +18,6 @@ PC com ports (always enabled)
 	com%d
 
 Parallel port
-  --disable-lpr				lpr.c
 	lpr%d
 
 System Console (always enabled)
@@ -82,328 +47,76 @@ Interface to setting up IO port access for users (always enabled)
 *** Disk controllers (except for SCSI)
 
 PC floppy
-  --disable-floppy		block/floppy.c
 	0x3f0, 370
 	fd%d
 
-IDE disks
-  --disable-ide			block/{cmd640,ide-cd,ide,rz1000,triton}.c
-	hd%d	(disks)
-	wcd%d	(cdroms)
-
-
-*** SCSI disks
-
-Disks all show up as `sd%d'.  CD Roms all show up as `cd%d'.  Tapes and
-generic are not currently supported.
-
-AdvanSys
-  --disable-advansys		scsi/advansys.c
-
-BusLogic
-  --disable-BusLogic		scsi/{BusLogic,FlashPoint}.c
-  --enable-flashpoint (if you want to omit FlashPoint support)
-
-UltraStor 14F/34F
-  --disable-u14-34f		scsi/u14-34f.c
-
-UlstraStor
-  --disable-ultrastor		scsi/ultrastor.c
-
-Adaptec AHA-152x/2825 (aha152x, aha2825)
-  --disable-aha152x		scsi/aha152x.c
-
-Adaptec AHA-1542
-  --disable-aha1542		scsi/aha1540.c
-
-Adaptec AHA-1740
-  --disable-aha1740		scsi/aha1740.c
-
-Adaptec AIC7xxx
-  --disable-aic7xxx		scsi/aic7xxx.c
-
-Future Domain 16xx
-  --disable-fdomain		scsi/fdomain.c
-
-Always IN 2000
-  --disable-in2000		scsi/in2000.c
-
-Generic NCR5380/53c400 (ncr5380, ncr53c400)
-  --enable-g_NCR5380		scsi/g_NCR5380.c
-
-NCR53c406a chip
-  --enable-NCR53c406a		scsi/NCR53c406a.c
-
-PAS16
-  --disable-pas16		scsi/pas16.c
-
-Seagate ST02, Future Domain TMC-8xx
-  --disable-seagate		scsi/seagate.c
-
-Trantor T128/T128F/T228 (t128, t128f, t228)
-  --disable-t128		scsi/t128.c
-
-NCR 53C7,8xx
-  --disable-ncr53c78xx		scsi/53c78xx.c
-
-EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix)
-  --enable-eata_dma		scsi/eata_dma.c
-
-EATA-PIO (old DPT PM2001, PM2012A)
-  --disable-eata_pio		scsi/eata_pio.c
-
-WD 7000
-  --disable-wd7000		scsi/wd7000.c
-
-EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards)
-  --disable-eata		scsi/eata.c
-
-AM53/79C974 (am53c974, am79c974)
-  --disable-AM53C974		scsi/AM53C974.c
-
-DTC3180/3280 (dtc3180, dtc3280)
-  --disable-dtc	       		scsi/dtc.c
-
-NCR53C8XX (ncr53c8xx, dc390f, dc390u, dc390w)
-  --disable-ncr53c8xx		scsi/ncr53c8xx.c
-
-Tekram DC-390(T) (dc390, dc390t)
-  --disable-tmscsim		scsi/tmscsim.c
-
-IOMEGA Parallel Port ZIP drive
-  --disable-ppa			scsi/ppa.c
-
-Qlogic FAS
-  --disable-qlogicfas		scsi/qlogicfas.c
-
-Qlogic ISP
-  --disable-qlogicisp		scsi/qlogicisp.c
-
-GDT SCSI Disk Array Controller
-  --disable-gdth		scsi/gdth.c
-
 
 *** Ethernet controllers
 These all show up as `eth%d' except the atp device.
 
 NE2000/NE1000 ISA (ne, ne1000, ne2000)
-  --disable-ne				net/ne.c net/8390.c
 	0x300,280,320,340,360
 
 3Com 503 (3c503) / Etherlink II
-  --disable-3c503			net/3c503.c net/8390.c
 	0x300,310,330,350,250,280,2a0,2e0
 
-3Com 509/579 (3c509, 3c579) / Etherlink III
-  --disable-3c509			net/3c509.c 
-
 WD80x3
-  --disable-wd				net/wd.c, net/8390.c
 	0x300,280,380,240
 
 3COM 501 (3c501) / Etherlink I
-  --disable-3c501			net/3c501.c
 	0x280,300
 
 SMC Ultra
-  --disable-smc-ultra			net/smc-ultra.c net/8390.c
 	0x200,220,240,280,300,340,380
 
-SMC Ultra32
-  --disable-smc-ultra32			net/smc-ultra32.c net/8390.c
-
 HP PCLAN+ (27247B and 27252A)
-  --disable-hp-plus			net/hp-plus.c net/8390.c
 	0x200,240,280,2c0,300,320,340
 
 HP PCLAN (27245 and other 27xxx series)
-  --disable-hp	 			net/hp.c, net/8390.c
 	0x300,320,340,280,2c0,200,240
 
-3Com 59x/90x (3c59x, 3c590, 3c592, 3c595, 3c597, 3c90x, 3c900, 3c905) "Vortex/Boomerang"
-  --disable-3c59x			net/3c59x.c
-
 Seeq8005
-  --disable-seeq8005			net/seeq8005.c
 	0x300,320,340,360
 
-HP 10/100VG PCLAN (ISA, EISA, PCI) (hp100, hpj2577, hpj2573, hpj2585, hp27248b)
-  --disable-hp100			net/hp100.c
-
-Ansel Communications EISA 3200
-  --disable-ac3200			net/ac3200.c, net/8390.c
-
 Cabletron E21xx
-  --disable-e2100			net/e2100.c, net/8390.c
 	0x300,280,380,220
 
 AT1700 (Fujitsu 86965)
-  --disable-at1700			net/at1700.c
 	0x260,280,2a0,240,340,320,380,300
 
 ICL EtherTeam 16i/32 (eth16i, eth32)
-  --disable-eth16i			net/eth16i.c 
 	0x260,280,2a0,240,340,320,380,300 (16i)
 
-Zenith Z-Note (znet, znote)
-  --disable-znet			net/znet.c
-
 EtherExpress 16
-  --disable-eexpress			net/eexpress.c
 	0x300,270,320,340
 
 EtherExpressPro
-  --disable-eepro			net/eepro.c
 	0x200,240,280,2c0,300,320,340,360
 
-Intel EtherExpressPro PCI 10+/100B/100+
-  --disable-eepro100			net/eepro100.c
-
-DEPCA (de100, de101, de200, de201, de202, de210, de422)
-  --disable-depca			net/depca.c
-
-EtherWORKS 3 (ewrk3, de203, de204, de205)
-  --disable-ewrk3			net/ewrk3.c
-
-DE4x5 (de4x5, de425, de434, de435, de450, de500)
-  --disable-de4x5			net/de4x5.c
-
-Apricot XEN-II on board ethernet
-  --disable-apricot			net/apricot.c
-
 AT&T WaveLAN & DEC RoamAbout DS
-  --enable-wavelan			net/wavelan.c
 	0x390
 
 3Com 507 (3c507, el16)
-  --disable-3c507			net/3c507.c
 	0x300,320,340,280
 
 3Com 505 (3c505, elplus)
-  --disable-3c505			net/3c505.c
 	0x300,280,310
 
 D-Link DE-600
-  --disable-de600			net/de600.c
 	0x378
 
 D-Link DE-620
-  --disable-de620			net/de620.c
 	0x378
 
 Schneider & Koch G16
-  --disable-sk_g16			net/sk_g16.c
 	0x100,180,208,220,288,320,328,390
 
 NI5210
-  --disable-ni52			net/ni52.c
 	0x300,280,360,320,340
 
 NI6510
-  --disable-ni65			net/ni65.c
 	0x300/320/340/360
 
 AT-LAN-TEC/RealTek pocket adaptor
-  --enable-atp				net/atp.c
 	0x378,278,3bc
 	atp%d
-
-AMD LANCE and PCnet (at1500, ne2100)
-  --disable-lance			net/lance.c
-
-DECchip Tulip (dc21x4x) PCI (elcp, tulip)
-  --disable-tulip			net/tulip.c
-
-FMV-181/182/183/184
-  --disable-fmv18x			net/fmv18x.c
-
-3Com 515 ISA Fast EtherLink
-  --disable-3c515			net/3c515.c
-
-AMD PCI PCnet32 (PCI bus NE2100 cards)
-  --disable-pcnet32			net/pcnet32.c
-
-PCI NE2000
-  --disable-ne2k-pci			net/ne2k-pci.c
-
-Packet Engines Yellowfin Gigabit-NIC
-  --disable-yellowfin			net/yellowfin.c
-
-RealTek 8129/8139 (rtl8129, rtl8139) (not 8019/8029!)
-  --disable-rtl8139			net/rtl8139.c
-
-SMC 83c170/175 EPIC/100 (epic, epic100) / EtherPower II
-  --disable-epic100			net/epic100.c
-
-TI ThunderLAN
-  --disable-tlan			net/tlan.c
-
-VIA Rhine
-  --disable-via-rhine			net/via-rhine.c
-
-Packet Engines "Hamachi" GNIC-2 Gigabit Ethernet
-  --disable-hamachi			net/hamachi.c
-
-Intel PCI Gigabit Ethernet
-  --disable-intel-gige			net/intel-gige.c
-
-Myson MTD803 Ethernet adapter series
-  --disable-myson803			net/myson803.c
-
-National Semiconductor DP8381x series PCI Ethernet
-  --disable-natsemi			net/natsemi.c
-
-National Semiconductor DP8382x series PCI Ethernet
-  --disable-ns820			net/ns820.c
-
-Adaptec Starfire network adapter
-  --disable-starfire			net/starfire.c
-
-Sundance ST201 "Alta" PCI Ethernet
-  --disable-sundance			net/sundance.c
-
-Winbond W89c840 PCI Ethernet
-  --disable-winbond-840			net/winbond-840.c
-
-*** pcmcia bridge drivers
-
-All source files are relative to [GNU Mach]/linux/pcmcia-cs.
-
-Intel 82365 PC Card controller
-  --disable-i82365			modules/i82365.c
-
-Disable scan for ISA interrupts at startup
-  --disable-pcmcia-isa
-
-*** pcmcia device drivers
-
-These all show up as `eth%d'.
-
-All source files are relative to [GNU Mach]/linux/pcmcia-cs.
-
-3Com 3c574 ``RoadRunner'' PCMCIA Ethernet
-  --disable-3c574_cs			clients/3c574_cs.c
-
-3Com 3c589 PCMCIA Ethernet card
-  --disable-3c589_cs			clients/3c589_cs.c
-
-Asix AX88190-based PCMCIA Ethernet adapters
-  --disable-axnet_cs			clients/axnet_cs.c
-
-fmvj18x chipset based PCMCIA Ethernet cards
-  --disable-fmvj18x_cs			clients/fmvj18x_cs.c
-
-New Media Ethernet LAN PCMCIA cards
-  --disable-nmclan_cs			clients/nmclan_cs.c
-
-NS8390-based PCMCIA cards
-  --disable-pcnet_cs			clients/pcnet_cs.c
-
-SMC91c92-based PCMCIA cards
-  --disable-smc91c92_cs			clients/smc91c92_cs.c
-
-Xircom CreditCard and Realport PCMCIA ethernet
-  --disable-xirc2ps_cs			clients/xirc2ps_cs.c
-
-Hermes or Prism 2 PCMCIA Wireless adapters (Orinoco)
-  --disable-orinoco_cs			wireless/orinoco_cs.c