2006-02-20 Thomas Schwinge <tschwinge@gnu.org>

Remove unused and unsupported code.  Consult the file
	`DEVELOPMENT' for details.  Partly based on suggestions by
	Gianluca Guida <glguida@gmail.com>.

	* chips/atm.c: Remove file.
	* chips/atmreg.h: Likewise.
	* chips/audio.c: Likewise.
	* chips/audio_config.h: Likewise.
	* chips/audio_defs.h: Likewise.
	* chips/bt431.c: Likewise.
	* chips/bt431.h: Likewise.
	* chips/bt455.c: Likewise.
	* chips/bt455.h: Likewise.
	* chips/bt459.c: Likewise.
	* chips/bt459.h: Likewise.
	* chips/bt478.c: Likewise.
	* chips/bt478.h: Likewise.
	* chips/build_font.c: Likewise.
	* chips/cfb_hdw.c: Likewise.
	* chips/cfb_misc.c: Likewise.
	* chips/dc503.c: Likewise.
	* chips/dc503.h: Likewise.
	* chips/dtop.h: Likewise.
	* chips/dtop_handlers.c: Likewise.
	* chips/dtop_hdw.c: Likewise.
	* chips/dz_7085.h: Likewise.
	* chips/dz_defs.h: Likewise.
	* chips/dz_hdw.c: Likewise.
	* chips/eccreg.h: Likewise.
	* chips/fb_hdw.c: Likewise.
	* chips/fb_misc.c: Likewise.
	* chips/fdc_82077.h: Likewise.
	* chips/fdc_82077_hdw.c: Likewise.
	* chips/frc.c: Likewise.
	* chips/ims332.c: Likewise.
	* chips/ims332.h: Likewise.
	* chips/isdn_79c30.h: Likewise.
	* chips/isdn_79c30_hdw.c: Likewise.
	* chips/kernel_font.c: Likewise.
	* chips/kernel_font.data: Likewise.
	* chips/lance.c: Likewise.
	* chips/lance.h: Likewise.
	* chips/lance_mapped.c: Likewise.
	* chips/lk201.c: Likewise.
	* chips/lk201.h: Likewise.
	* chips/mc_clock.c: Likewise.
	* chips/mc_clock.h: Likewise.
	* chips/mouse.c: Likewise.
	* chips/nc.c: Likewise.
	* chips/nc.h: Likewise.
	* chips/nw.h: Likewise.
	* chips/nw_mk.c: Likewise.
	* chips/nw_mk.h: Likewise.
	* chips/pm_defs.h: Likewise.
	* chips/pm_hdw.c: Likewise.
	* chips/pm_misc.c: Likewise.
	* chips/scc_8530.h: Likewise.
	* chips/scc_8530_hdw.c: Likewise.
	* chips/screen.c: Likewise.
	* chips/screen.h: Likewise.
	* chips/screen_defs.h: Likewise.
	* chips/screen_switch.c: Likewise.
	* chips/screen_switch.h: Likewise.
	* chips/serial_console.c: Likewise.
	* chips/serial_defs.h: Likewise.
	* chips/sfb_hdw.c: Likewise.
	* chips/sfb_misc.c: Likewise.
	* chips/spans.c: Likewise.
	* chips/spans.h: Likewise.
	* chips/tca100.c: Likewise.
	* chips/tca100.h: Likewise.
	* chips/tca100_if.c: Likewise.
	* chips/tca100_if.h: Likewise.
	* chips/vs42x_rb.h: Likewise.
	* chips/xcfb_hdw.c: Likewise.
	* chips/xcfb_misc.c: Likewise.
	* chips/xcfb_monitor.h: Likewise.
	* Makefile.in (chips-files): Only contain `busses.c' and `busses.h'.
	* kern/syscall_sw.c: Don't include <chips/nw_mk.h> anymore.

1 files changed, 0 insertions, 441 deletions

diff --git a/chips/dtop_handlers.c b/chips/dtop_handlers.c
deleted file mode 100644
index 7a83ea2..0000000
--- a/chips/dtop_handlers.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/* 
- * Mach Operating System
- * Copyright (c) 1992 Carnegie Mellon University
- * All Rights Reserved.
- * 
- * Permission to use, copy, modify and distribute this software and its
- * documentation is hereby granted, provided that both the copyright
- * notice and this permission notice appear in all copies of the
- * software, derivative works or modified versions, and any portions
- * thereof, and that both notices appear in supporting documentation.
- * 
- * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
- * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
- * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
- * 
- * Carnegie Mellon requests users of this software to return to
- * 
- *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
- *  School of Computer Science
- *  Carnegie Mellon University
- *  Pittsburgh PA 15213-3890
- * 
- * any improvements or extensions that they make and grant Carnegie Mellon
- * the rights to redistribute these changes.
- */
-/*
- *	File: dtop_handlers.c
- * 	Author: Alessandro Forin, Carnegie Mellon University
- *	Date:	1/92
- *
- *	Handler functions for devices attached to the DESKTOP bus.
- */
-
-#include <dtop.h>
-#if	NDTOP > 0
-
-#include <mach_kdb.h>
-
-#include <machine/machspl.h>		/* spl definitions */
-#include <mach/std_types.h>
-#include <device/io_req.h>
-#include <device/tty.h>
-
-#include <chips/busses.h>
-#include <chips/serial_defs.h>
-#include <chips/screen_defs.h>
-#include <mips/PMAX/tc.h>
-
-#include <chips/dtop.h>
-#include <chips/lk201.h>
-
-/*
- * Default handler function
- */
-int
-dtop_null_device_handler(
-	 dtop_device_t	dev,
-	 dtop_message_t	msg,
-	 int		event,
-	 unsigned char	outc)
-{
-	/* See if the message was to the default address (powerup) */
-
-	/* Uhmm, donno how to handle this. Drop it */
-	if (event == DTOP_EVENT_RECEIVE_PACKET)
-		dev->unknown_report = *msg;
-	return 0;
-}
-
-/*
- * Handler for locator devices (mice)
- */
-int
-dtop_locator_handler(
-	 dtop_device_t	dev,
-	 dtop_message_t	msg,
-	 int		event,
-	 unsigned char	outc)
-{
-	register unsigned short	buttons;
-	register short		coord;
-#if	BYTE_MSF
-#	define	get_short(b0,b1)	(((b1)<<8)|(b0))
-#else
-#	define	get_short(b0,b1)	(((b0)<<8)|(b1))
-#endif
-
-	/*
-	 * Do the position first
-	 */
-	{
-		register int		i;
-		register boolean_t	moved;
-		int			delta_coords[L_COORD_MAX];
-
-		/*
-		 * Get all coords, see if it moved at all (buttons!)
-		 */
-		moved = FALSE;
-		for (i = 0; i < dev->locator.n_coords; i++) {
-
-			coord = get_short(msg->body[2+(i<<1)],
-					  msg->body[3+(i<<1)]);
-
-			if (dev->locator.relative) {
-				/*
-				 * Flame on
-				 * I am getting tired of this, why do they have to
-				 * keep this bug around ?  Religion ?  Damn, they
-				 * design a keyboard for X11 use and forget the mouse ?
-				 * Flame off
-				 */
-#define	BOGUS_DEC_X_AXIS
-#ifdef	BOGUS_DEC_X_AXIS
-				if (i == 1) coord = - coord;
-#endif	/* BOGUS_DEC_X_AXIS */
-				/* dev->locator.coordinate[i] += coord; */
-			} else {
-				register unsigned int	old_coord;
-
-				old_coord = dev->locator.coordinate[i];
-				dev->locator.coordinate[i] = coord;
-				coord = old_coord - coord;
-			}
-			delta_coords[i] = coord;
-			if (coord != 0)
-				moved = TRUE;
-		}
-		if (moved) {
-			/* scale and threshold done higher up */
-			screen_motion_event( 0,
-				dev->locator.type,
-				delta_coords[0],
-				delta_coords[1]);
-		}
-	}
-
-	/*
-	 * Time for the buttons now
-	 */
-#define	new_buttons	coord
-	new_buttons = get_short(msg->body[0],msg->body[1]);
-	buttons = new_buttons ^ dev->locator.prev_buttons;
-	if (buttons) {
-		register int	i, type;
-
-		dev->locator.prev_buttons = new_buttons;
-		for (i = 0; buttons; i++, buttons >>= 1) {
-
-			if ((buttons & 1) == 0) continue;
-
-			type = (new_buttons & (1<<i)) ? 
-				EVT_BUTTON_DOWN : EVT_BUTTON_UP;
-			screen_keypress_event(	0,
-						dev->locator.type,
-						dev->locator.button_code[i],
-						type);
-		}
-	}
-#undef	new_buttons
-}
-
-/*
- * Handler for keyboard devices
- * Special case: outc set for recv packet means
- * we are inside the kernel debugger
- */
-int
-dtop_keyboard_handler(
-	 dtop_device_t	dev,
-	 dtop_message_t	msg,
-	 int		event,
-	 unsigned char	outc)
-{
-	char		save[11];
-	register int	msg_len, c;
-
-	/*
-	 * Well, really this code handles just an lk401 and in
-	 * a very primitive way at that.  Should at least emulate
-	 * an lk201 decently, and make that a pluggable module.
-	 * Sigh.
-	 */
-
-	if (event != DTOP_EVENT_RECEIVE_PACKET) {
-		switch (event) {
-		case DTOP_EVENT_POLL:
-		    {
-			register unsigned int	t, t0;
-
-			/*
-			 * Note we will always have at least the
-			 * end-of-list marker present (a zero)
-			 * Here stop and trigger of autorepeat.
-			 * Do not repeat shift keys, either.
-			 */
-			{
-				register unsigned char	uc, i = 0;
-
-rpt_char:
-				uc = dev->keyboard.last_codes[i];
-
-				if (uc == DTOP_KBD_EMPTY) {
-					dev->keyboard.k_ar_state = K_AR_OFF;
-					return 0;
-				}
-				if ((uc >= LK_R_SHIFT) && (uc <= LK_R_ALT)) {
-					/* sometimes swapped. Grrr. */
-					if (++i < dev->keyboard.last_codes_count) 
-						goto rpt_char;
-					dev->keyboard.k_ar_state = K_AR_OFF;
-					return 0;
-				}
-				c = uc;
-			}
-
-			/*
-			 * Got a char. See if enough time from stroke,
-			 * or from last repeat.
-			 */
-			t0 = (dev->keyboard.k_ar_state == K_AR_TRIGGER) ? 30 : 500;
-			t = approx_time_in_msec();
-			if ((t - dev->keyboard.last_msec) < t0)
-				return 0;
-
-			dev->keyboard.k_ar_state = K_AR_TRIGGER;
-
-			/*
-			 * Simplest thing to do is to mimic lk201
-			 */
-			outc = lk201_input(0, LK_REPEAT);
-			if ( ! screen_keypress_event(	0,
-							DEV_KEYBD,
-							c,
-							EVT_BUTTON_UP)) {
-				if (outc > 0) cons_input(0, outc, 0);
-			} else
-				screen_keypress_event(	0,
-							DEV_KEYBD,
-							c,
-							EVT_BUTTON_DOWN);
-			return 0;
-		    }
-		default:	gimmeabreak();/*fornow*/
-		}
-		return -1;
-	}
-
-	msg_len = msg->code.val.len;
-
-	/* Check for errors */
-	c = msg->body[0];
-	if ((c < DTOP_KBD_KEY_MIN) && (c != DTOP_KBD_EMPTY)) {
-		printf("Keyboard error: %x %x %x..\n", msg_len, c, msg->body[1]);
-		if (c != DTOP_KBD_OUT_ERR) return -1;
-		/* spec sez if scan list overflow still there is data */
-		msg->body[0] = 0;
-	}
-
-	dev->keyboard.last_msec = approx_time_in_msec();
-
-	switch (dev->keyboard.k_ar_state) {
-	case K_AR_IDLE:
-		/* if from debugger, timeouts might not be working yet */
-		if (outc == 0xff)
-			break;
-		dtop_keyboard_autorepeat( dev );
-		/* fall through */
-	case K_AR_TRIGGER:
-		dev->keyboard.k_ar_state = K_AR_ACTIVE;
-		break;
-	case K_AR_ACTIVE:
-		break;
-	case K_AR_OFF:	gimmeabreak();	/* ??? */
-		dev->keyboard.k_ar_state = K_AR_IDLE;
-	}
-
-	/*
-	 * We can only assume that pressed keys are reported in the
-	 * same order (a minimum of sanity, please) across scans.
-	 * To make things readable, do a first pass cancelling out
-	 * all keys that are still pressed, and a second one generating
-	 * events.  While generating events, do the upstrokes first
-	 * from oldest to youngest, then the downstrokes from oldest
-	 * to youngest.  This copes with lost packets and provides
-	 * a reasonable model even if scans are too slow.
-	 */
-
-	/* make a copy of new state first */
-	{
-		register char	*p, *q, *e;
-
-		p = save;
-		q = (char*)msg->body;
-		e = (char*)&msg->body[msg_len];
-
-		while (q < e)
-			*p++ = *q++;
-	}
-
-	/*
-	 * Do the cancelling pass
-	 */
-	{
-		register char	*ls, *le, *ns, *ne, *sync;
-
-		ls = (char*)dev->keyboard.last_codes;
-		le = (char*)&dev->keyboard.last_codes[dev->keyboard.last_codes_count];
-		ns = (char*)msg->body;
-		ne = (char*)&msg->body[msg_len];
-
-		/* sync marks where to restart scanning, saving
-		   time thanks to ordering constraints */
-		for (sync = ns; ls < le; ls++) {
-			register char	c = *ls;
-			for (ns = sync; ns < ne; ns++)
-				if (c == *ns) {
-					*ls = *ns = 0;
-					sync = ns + 1;
-					break;
-				}
-			/* we could already tell if c is an upstroke,
-			   but see the above discussion about errors */
-		}
-	}
-	/*
-	 * Now generate all upstrokes
-	 */
-	{
-		register char	*ls, *le;
-		register unsigned char	c;
-
-		le = (char*)dev->keyboard.last_codes;
-		ls = (char*)&dev->keyboard.last_codes[dev->keyboard.last_codes_count - 1];
-
-		for ( ; ls >= le; ls--)
-		    if (c = *ls) {
-			/* keep kernel notion of lk201 state consistent */
-			(void) lk201_input(0,c);			
-
-			if (outc == 0)
-			    screen_keypress_event(0,
-						  DEV_KEYBD,
-						  c,
-						  EVT_BUTTON_UP);
-		    }
-	}
-	/*
-	 * And finally the downstrokes
-	 */
-	{
-		register char	*ns, *ne, c, retc;
-
-		ne = (char*)msg->body;
-		ns = (char*)&msg->body[msg_len - 1];
-		retc = 0;
-
-		for ( ; ns >= ne; ns--)
-		    if (c = *ns) {
-			register unsigned char	data;
-
-			data = c;
-			c = lk201_input(0, data);
-
-			if (c == -2) {	/* just returned from kdb */
-				/* NOTE: many things have happened while
-				   we were sitting on the stack, now it
-				   is last_codes that holds the truth */
-#if 1
-				/* But the truth might not be welcome.
-				   If we get out because we hit RETURN
-				   on the rconsole line all is well,
-				   but if we did it from the keyboard
-				   we get here on the downstroke. Then
-				   we will get the upstroke which we
-				   would give to X11. People complained
-				   about this extra keypress..  so they
-				   lose everything. */
-
-				dev->keyboard.last_codes_count = 1;
-				dev->keyboard.last_codes[0] = 0;
-#endif
-				return -1;
-			}
-
-			/*
-			 * If X11 had better code for the keyboard this
-			 * would be an EVT_BUTTON_DOWN.  But that would
-			 * screwup the REPEAT function. Grrr.
-			 */
-			/* outc non zero sez we are in the debugger */
-			if (outc == 0) {
-			    if (screen_keypress_event(0,
-						  DEV_KEYBD,
-						  data,
-						  EVT_BUTTON_DOWN))
-				c = -1; /* consumed by X */
-			    else
-				if (c > 0) cons_input(0, c, 0);
-			}
-			/* return the xlated keycode anyways */
-			if ((c > 0) && (retc == 0))
-			    retc = c;
-		    }
-		outc = retc;
-	}
-	/* install new scan state */
-	{
-		register char	*p, *q, *e;
-
-		p = (char*)dev->keyboard.last_codes;
-		q = (char*)save;
-		e = (char*)&save[msg_len];
-
-		while (q < e)
-			*p++ = *q++;
-		dev->keyboard.last_codes_count = msg_len;
-	}
-	return outc;
-}
-
-/*
- * Polled operations: we must do autorepeat by hand. Sigh.
- */
-dtop_keyboard_autorepeat(
-	dtop_device_t	dev)
-{
-	spl_t	s = spltty();
-
-	if (dev->keyboard.k_ar_state != K_AR_IDLE)
-		dtop_keyboard_handler( dev, 0, DTOP_EVENT_POLL, 0);
-
-	if (dev->keyboard.k_ar_state == K_AR_OFF)
-		dev->keyboard.k_ar_state = K_AR_IDLE;
-	else
-		timeout( dtop_keyboard_autorepeat, dev, dev->keyboard.poll_frequency);
-
-	splx(s);
-}
-
-#endif	/*NDTOP>0*/