%TOC%

This is a brief Building OSKit Mach HowTO. It covers evrything from getting the latest sources of both the [OSKit](http://www.cs.utah.edu/flux/oskit/) and the OSKit branch of the GNUmach kernel. There is also [another guide](http://www.etherhogz.org/doc/oskit-mach.html). Down to building and debugging them.

## <a name="Getting_your_hands_on_the_source"> Getting your hands on the source </a>

First you need to checkout the relevant sources.

### <a name="Accessing_the_FLUX_groups_CVS_or"> </a> Accessing the FLUX groups CVS, or FTP

You can use either the bleeding edge OSKit from CVS, or the latest public release. The latter is preferrable!

CVS:

      CVSROOT=":pserver:anoncvs@leak.cs.utah.edu:/cvs"
      CVS_RSH=ssh
      cvs -z3 co oskit

St. Patricks day 2002 release: <ftp://flux.cs.utah.edu/flux/oskit/oskit-20020317.tar.gz>

Valentine's day 2001 release: <ftp://flux.cs.utah.edu/flux/oskit/oskit-20010214.tar.gz>

### <a name="Accessing_GNU_CVS"> </a> Accessing GNU CVS

Setup your environment with the CVSROOT variable and checkout the oskit-branch of the gnumach kernel.

      CVSROOT=":pserver:anoncvs@anoncvs.gnu.org:/cvsroot/hurd"
      cvs -z3 co -r oskit-branch -d oskit-mach gnumach

## <a name="Building"> Building </a>

### <a name="OSKit"> </a> OSKit

The attached [[ATTACHURLmodulesx86pc]] file is my personal setup, it works for me. Now, how to configure and build the OSKit.

Configuring:

    # cd oskit-20020317/
    # mkdir build
    # cd build
    # ../configure --prefix=/usr/local --enable-debug

Building:

    # make
    # sudo make install

### <a name="OSKit_Mach"> </a> OSKit Mach

To build any Mach kernel you need an interface generator, a mig. If your host system is Debian based you can get the "Cheap cross-compuler for GNU/Hurd" with a simple:

    $ apt-get gcc-i386-gnu

This will install the i386-gnu-mig in /usr/bin for you.

Configuring:

    # cd oskit-mach
    # mkdir build
    # cd build
    # CFLAGS="-g" MIG=i386-gnu-mig OSKIT_LIBDIR=/usr/local/lib/oskit ../configure --prefix=/gnu --enable-debug

Building:

    # make
    # sudo make install
    # sudo gzip /gnu/boot/oskit-mach

## <a name="Debugging"> Debugging </a>

For now, see the [[RemoteDebugOskitMach]] page.

# <a name="Attachments"> Attachments </a>

* [[ATTACHURLmodulesx86pc]]: Modules to build in OSKit

----

-- [[Main/JoachimNilsson]] - 14 May 2002