From eccdd13dd3c812b8f0b3d046ef9d8738df00562a Mon Sep 17 00:00:00 2001 From: Thomas Schwinge Date: Wed, 25 Sep 2013 21:45:38 +0200 Subject: IRC. --- microkernel/mach/gnumach/hardware_compatibility_list.mdwn | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'microkernel/mach/gnumach') diff --git a/microkernel/mach/gnumach/hardware_compatibility_list.mdwn b/microkernel/mach/gnumach/hardware_compatibility_list.mdwn index 587178e9..32e712c9 100644 --- a/microkernel/mach/gnumach/hardware_compatibility_list.mdwn +++ b/microkernel/mach/gnumach/hardware_compatibility_list.mdwn @@ -105,6 +105,11 @@ These boards are known to work. Gnumach/Hurd has been installed and run on these * VIA EPIA-M Mini-ITX motherboard with VIA Nehemiah C3 1Ghz processor. Onboard NIC (VIA Rhine) works good. * Compaq Deskpro ENS, Pentium3 (666 MHz upgraded to 1 GHz), Intel i815 chipset, chipset integrated NIC (detected twice, but works fine with eth0; trying to access eth1 confuses the driver and makes the system unusable), Matrox Mystique 220 (PCI) graphics card. Also works with rtl8029 (NE2000 PCI) NIC when onboard NIC disabled in BIOS setup. * Abit BX6 Rev. 2.0 with Celeron 400, after disabling "memory hole at 15MB" option in BIOS setup. (Otherwise, Mach detects only 15MiB of RAM, making Hurd run *extremely* slow and instable.) Should also work with PentiumII or Pentium3. +* IRC, freenode, #hurd, 2013-08-26: + + < stargater> have anyone gnu/hurd running on real hw ? + < youpi> my latitude e6420 laptop, for instance + # User Failure Reports -- cgit v1.2.3