From 47e4d194dc36adfcfd2577fa4630c9fcded005d3 Mon Sep 17 00:00:00 2001
From: Thomas Schwinge <tschwinge@gnu.org>
Date: Sun, 27 Oct 2013 19:15:06 +0100
Subject: IRC.

---
 faq/sata_disk_drives/discussion.mdwn | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

(limited to 'faq/sata_disk_drives')

diff --git a/faq/sata_disk_drives/discussion.mdwn b/faq/sata_disk_drives/discussion.mdwn
index e9da8560..d05566b6 100644
--- a/faq/sata_disk_drives/discussion.mdwn
+++ b/faq/sata_disk_drives/discussion.mdwn
@@ -238,3 +238,21 @@ License|/fdl]]."]]"""]]
     <braunr> i'll stick with ide for now, but at least setting sata with
       libvirt was quite easy to do
     <braunr> so we can easily switch later
+
+
+## IRC, freenode, #hurd, 2013-10-22
+
+    <teythoon> youpi: do I need to do anything to enable the ahci driver?
+      gnumach 1.4 should include it, right?
+    <youpi> it should, yes
+    <youpi> make sure to put your board in ahci mode, not raid mode
+    <youpi> (and not ata mode)
+    <teythoon> youpi: hm, I will try to do so
+    <teythoon> youpi: does the driver print anything to the console?
+    <youpi> teythoon: yes, AHCI SATA 00:04.0 BAR 0xfebf1000 IRQ 11
+    <teythoon> youpi: well, the bios has two modes of operation, 'raid' and
+      'ide', I selected 'ide'
+    <youpi> ergl
+    <teythoon> youpi: hm, I think my board has no ahci controller, linux uses
+      the sata_via module to talk to it :/
+    <youpi> ah :/
-- 
cgit v1.2.3