From 7ebe52aa00c0fc66f7527063372e3388f8e36557 Mon Sep 17 00:00:00 2001 From: Markus Kaarn Date: Sat, 17 Apr 2004 14:17:05 +0000 Subject: Just a test --- TWiki/WikiNotation/XF86Config | 469 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 469 insertions(+) create mode 100644 TWiki/WikiNotation/XF86Config (limited to 'TWiki/WikiNotation/XF86Config') diff --git a/TWiki/WikiNotation/XF86Config b/TWiki/WikiNotation/XF86Config new file mode 100644 index 00000000..08a241df --- /dev/null +++ b/TWiki/WikiNotation/XF86Config @@ -0,0 +1,469 @@ +# File generated by xf86config. + +# +# Copyright (c) 1999 by The XFree86 Project, Inc. +# +# Permission is hereby granted, free of charge, to any person obtaining a +# copy of this software and associated documentation files (the "Software"), +# to deal in the Software without restriction, including without limitation +# the rights to use, copy, modify, merge, publish, distribute, sublicense, +# and/or sell copies of the Software, and to permit persons to whom the +# Software is furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +# SOFTWARE. +# +# Except as contained in this notice, the name of the XFree86 Project shall +# not be used in advertising or otherwise to promote the sale, use or other +# dealings in this Software without prior written authorization from the +# XFree86 Project. +# + +# ********************************************************************** +# Refer to the XF86Config(4/5) man page for details about the format of +# this file. +# ********************************************************************** + +# ********************************************************************** +# Module section -- this section is used to specify +# which dynamically loadable modules to load. +# ********************************************************************** +# +Section "Module" + +# This loads the DBE extension module. + + Load "dbe" # Double buffer extension + +# This loads the miscellaneous extensions module, and disables +# initialisation of the XFree86-DGA extension within that module. + SubSection "extmod" + Option "omit xfree86-dga" # don't initialise the DGA extension + EndSubSection + +# This loads the Type1 and FreeType font modules + Load "type1" + Load "speedo" +# Load "freetype" +# Load "xtt" + +# This loads the GLX module + Load "glx" +# This loads the DRI module +# Load "dri" + +EndSection + +# ********************************************************************** +# Files section. This allows default font and rgb paths to be set +# ********************************************************************** + +Section "Files" + +# The location of the RGB database. Note, this is the name of the +# file minus the extension (like ".txt" or ".db"). There is normally +# no need to change the default. + + RgbPath "/usr/X11R6/lib/X11/rgb" + +# Multiple FontPath entries are allowed (which are concatenated together), +# as well as specifying multiple comma-separated entries in one FontPath +# command (or a combination of both methods) +# +# If you don't have a floating point coprocessor and emacs, Mosaic or other +# programs take long to start up, try moving the Type1 and Speedo directory +# to the end of this list (or comment them out). +# + +# FontPath "/usr/X11R6/lib/X11/fonts/TTF/" + FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/" + FontPath "/usr/X11R6/lib/X11/fonts/local/" + FontPath "/usr/X11R6/lib/X11/fonts/misc/" + FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" + FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" + FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" + FontPath "/usr/X11R6/lib/X11/fonts/Type1/" +# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" +# FontPath "/usr/X11R6/lib/X11/fonts/freefont/" + FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" + FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" + +# The module search path. The default path is shown here. + +# ModulePath "/usr/X11R6/lib/modules" + +EndSection + +# ********************************************************************** +# Server flags section. +# ********************************************************************** + +Section "ServerFlags" + +# Uncomment this to cause a core dump at the spot where a signal is +# received. This may leave the console in an unusable state, but may +# provide a better stack trace in the core dump to aid in debugging + +# Option "NoTrapSignals" + +# Uncomment this to disable the VT switch sequence +# (where n is 1 through 12). This allows clients to receive these key +# events. + +# Option "DontVTSwitch" + +# Uncomment this to disable the server abort sequence +# This allows clients to receive this key event. + +# Option "DontZap" + +# Uncomment this to disable the / mode switching +# sequences. This allows clients to receive these key events. + +# Option "Dont Zoom" + +# Uncomment this to disable tuning with the xvidtune client. With +# it the client can still run and fetch card and monitor attributes, +# but it will not be allowed to change them. If it tries it will +# receive a protocol error. + +# Option "DisableVidModeExtension" + +# Uncomment this to enable the use of a non-local xvidtune client. + +# Option "AllowNonLocalXvidtune" + +# Uncomment this to disable dynamically modifying the input device +# (mouse and keyboard) settings. + +# Option "DisableModInDev" + +# Uncomment this to enable the use of a non-local client to +# change the keyboard or mouse settings (currently only xset). + +# Option "AllowNonLocalModInDev" + +EndSection + +# ********************************************************************** +# Input devices +# ********************************************************************** + +# ********************************************************************** +# Core keyboard's InputDevice section +# ********************************************************************** + +Section "InputDevice" + + Identifier "Keyboard1" + Driver "Keyboard" + Option "AutoRepeat" "500 30" + Option "XkbRules" "xfree86" + Option "XkbModel" "pc105" + Option "XkbLayout" "us,ru(winkeys)" + Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll" + +# For most OSs the protocol can be omitted (it defaults to "Standard"). +# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), +# uncomment the following line. + +# Option "Protocol" "Xqueue" + +# Option "AutoRepeat" "500 30" + +# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) +# Option "Xleds" "1 2 3" + +# Option "LeftAlt" "Meta" +# Option "RightAlt" "ModeShift" + +# To customise the XKB settings to suit your keyboard, modify the +# lines below (which are the defaults). For example, for a non-U.S. +# keyboard, you will probably want to use: +# Option "XkbModel" "pc102" +# If you have a US Microsoft Natural keyboard, you can use: +# Option "XkbModel" "microsoft" +# +# Then to change the language, change the Layout setting. +# For example, a german layout can be obtained with: +# Option "XkbLayout" "de" +# or: +# Option "XkbLayout" "de" +# Option "XkbVariant" "nodeadkeys" +# +# If you'd like to switch the positions of your capslock and +# control keys, use: +# Option "XkbOptions" "ctrl:swapcaps" + +# These are the default XKB settings for XFree86 +# Option "XkbRules" "xfree86" +# Option "XkbModel" "pc101" +# Option "XkbLayout" "us" +# Option "XkbVariant" "" +# Option "XkbOptions" "" + +# Option "XkbDisable" + +# Option "XkbRules" "xfree86" +# Option "XkbModel" "pc101" +# Option "XkbLayout" "us" + +EndSection + + +# ********************************************************************** +# Core Pointer's InputDevice section +# ********************************************************************** + +Section "InputDevice" + +# Identifier and driver + + Identifier "Mouse1" + Driver "mouse" + Option "ZAxisMapping" "4 5" + Option "Protocol" "IMPS/2" + Option "Device" "/dev/psaux" + +# Mouse-speed setting for PS/2 mouse. + +# Option "Resolution" "256" + +# When using XQUEUE, comment out the above two lines, and uncomment +# the following line. + +# Option "Protocol" "Xqueue" + +# Baudrate and SampleRate are only for some Logitech mice. In +# almost every case these lines should be omitted. + +# Option "BaudRate" "9600" +# Option "SampleRate" "150" + +# Emulate3Buttons is an option for 2-button Microsoft mice +# Emulate3Timeout is the timeout in milliseconds (default is 50ms) + +# Option "Emulate3Buttons" +# Option "Emulate3Timeout" "50" + +# ChordMiddle is an option for some 3-button Logitech mice + +# Option "ChordMiddle" + +EndSection + + +# ********************************************************************** +# Other input device sections +# this is optional and is required only if you +# are using extended input devices. This is for example only. Refer +# to the XF86Config man page for a description of the options. +# ********************************************************************** +# +# Section "InputDevice" +# Identifier "Mouse2" +# Driver "mouse" +# Option "Protocol" "MouseMan" +# Option "Device" "/dev/mouse2" +# EndSection +# +# Section "InputDevice" +# Identifier "spaceball" +# Driver "magellan" +# Option "Device" "/dev/cua0" +# EndSection +# +# Section "InputDevice" +# Identifier "spaceball2" +# Driver "spaceorb" +# Option "Device" "/dev/cua0" +# EndSection +# +# Section "InputDevice" +# Identifier "touchscreen0" +# Driver "microtouch" +# Option "Device" "/dev/ttyS0" +# Option "MinX" "1412" +# Option "MaxX" "15184" +# Option "MinY" "15372" +# Option "MaxY" "1230" +# Option "ScreenNumber" "0" +# Option "ReportingMode" "Scaled" +# Option "ButtonNumber" "1" +# Option "SendCoreEvents" +# EndSection +# +# Section "InputDevice" +# Identifier "touchscreen1" +# Driver "elo2300" +# Option "Device" "/dev/ttyS0" +# Option "MinX" "231" +# Option "MaxX" "3868" +# Option "MinY" "3858" +# Option "MaxY" "272" +# Option "ScreenNumber" "0" +# Option "ReportingMode" "Scaled" +# Option "ButtonThreshold" "17" +# Option "ButtonNumber" "1" +# Option "SendCoreEvents" +# EndSection + +# ********************************************************************** +# Monitor section +# ********************************************************************** + +# Any number of monitor sections may be present + +Section "Monitor" + + Identifier "My Monitor" + +# HorizSync is in kHz unless units are specified. +# HorizSync may be a comma separated list of discrete values, or a +# comma separated list of ranges of values. +# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S +# USER MANUAL FOR THE CORRECT NUMBERS. + +# HorizSync 31.5, 35.15, 35.5 + + HorizSync 30-64 # multisync +# HorizSync 31.5, 35.2 # multiple fixed sync frequencies +# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies + +# VertRefresh is in Hz unless units are specified. +# VertRefresh may be a comma separated list of discrete values, or a +# comma separated list of ranges of values. +# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S +# USER MANUAL FOR THE CORRECT NUMBERS. + + VertRefresh 50-70 + +EndSection + + +# ********************************************************************** +# Graphics device section +# ********************************************************************** + +# Any number of graphics device sections may be present + +# Standard VGA Device: + +Section "Device" + Identifier "Standard VGA" + VendorName "Unknown" + BoardName "Unknown" + +# The chipset line is optional in most cases. It can be used to override +# the driver's chipset detection, and should not normally be specified. + +# Chipset "generic" + +# The Driver line must be present. When using run-time loadable driver +# modules, this line instructs the server to load the specified driver +# module. Even when not using loadable driver modules, this line +# indicates which driver should interpret the information in this section. + + Driver "vga" +# The BusID line is used to specify which of possibly multiple devices +# this section is intended for. When this line isn't present, a device +# section can only match up with the primary video device. For PCI +# devices a line like the following could be used. This line should not +# normally be included unless there is more than one video device +# intalled. + +# BusID "PCI:0:10:0" + +# VideoRam 256 + +# Clocks 25.2 28.3 + +EndSection + +# Device configured by xf86config: + +Section "Device" + Identifier "RIVA TNT" + Driver "nvidia" + #VideoRam 131072 + # Insert Clocks lines here if appropriate +EndSection + + +# ********************************************************************** +# Screen sections +# ********************************************************************** + +# Any number of screen sections may be present. Each describes +# the configuration of a single screen. A single specific screen section +# may be specified from the X server command line with the "-screen" +# option. +Section "Screen" + Identifier "Screen 1" + Device "RIVA TNT" + Monitor "My Monitor" + DefaultDepth 24 + + Subsection "Display" + Depth 8 + Modes "1280x1024" "1024x768" "800x600" "640x480" + ViewPort 0 0 + EndSubsection + Subsection "Display" + Depth 16 + Modes "1280x1024" "1024x768" "800x600" "640x480" + ViewPort 0 0 + EndSubsection + Subsection "Display" + Depth 24 + Modes "1024x768" + ViewPort 0 0 + EndSubsection +EndSection + +# ********************************************************************** +# ServerLayout sections. +# ********************************************************************** + +# Any number of ServerLayout sections may be present. Each describes +# the way multiple screens are organised. A specific ServerLayout +# section may be specified from the X server command line with the +# "-layout" option. In the absence of this, the first section is used. +# When now ServerLayout section is present, the first Screen section +# is used alone. + +Section "ServerLayout" + +# The Identifier line must be present + Identifier "Simple Layout" + +# Each Screen line specifies a Screen section name, and optionally +# the relative position of other screens. The four names after +# primary screen name are the screens to the top, bottom, left and right +# of the primary screen. In this example, screen 2 is located to the +# right of screen 1. + + Screen "Screen 1" + +# Each InputDevice line specifies an InputDevice section name and +# optionally some options to specify the way the device is to be +# used. Those options include "CorePointer", "CoreKeyboard" and +# "SendCoreEvents". + + InputDevice "Mouse1" "CorePointer" + InputDevice "Keyboard1" "CoreKeyboard" + +EndSection + +# Section "DRI" +# Mode 0666 +# EndSection + -- cgit v1.2.3