From c5a98575b6fedbb0aac0c237aa08c77d3b45f8ea Mon Sep 17 00:00:00 2001 From: Joachim Nilsson Date: Sat, 20 Jul 2002 16:02:00 +0000 Subject: none --- Mach/BuildingOskitMach.mdwn | 47 ++++++++++++++++++++++++++++++++------------- 1 file changed, 34 insertions(+), 13 deletions(-) diff --git a/Mach/BuildingOskitMach.mdwn b/Mach/BuildingOskitMach.mdwn index 0dd10369..7f25d598 100644 --- a/Mach/BuildingOskitMach.mdwn +++ b/Mach/BuildingOskitMach.mdwn @@ -1,3 +1,5 @@ +## Table of Contents + %TOC% This is a brief Building OSKit Mach HowTO. It covers everything from getting the latest sources of both the [OSKit](http://www.cs.utah.edu/flux/oskit/) and the OSKit branch of the GNUmach kernel. There is also [another guide](http://www.etherhogz.org/doc/oskit-mach.html). Down to building and debugging them. On May 27 after the [[GnuMach]] 1.3 release, Roland McGrath merged OSKit Mach in the [[GnuMach]] 2.x mainline. @@ -6,47 +8,66 @@ This is a brief Building OSKit Mach HowTO. It covers everything from getting the First you need to checkout the relevant sources. -### Accessing the FLUX groups CVS, or FTP +### Accessing the FLUX groups' CVS, or FTP You can use either the bleeding edge OSKit from CVS, or the latest public release. The latter is preferrable! -CVS: +**_CVS:_** CVSROOT=":pserver:anoncvs@leak.cs.utah.edu:/cvs" CVS_RSH=ssh cvs -z3 co oskit -St. Patricks day 2002 release: +**_FTP:_** St. Patricks day 2002 release: Valentine's day 2001 release: -### Accessing GNU CVS +### Accessing the GNU CVS + +The recommended document for accessing the Hurd CVS on [Savannah](http://savannah.gnu.org) is at -Setup your environment with the CVSROOT variable and checkout gnumach. +This is only a brief restatement, which may ormay not be accurate. Setup your environment with the CVSROOT variable. How you do this may differ between shells. CVSROOT=":pserver:anoncvs@anoncvs.gnu.org:/cvsroot/hurd" - cvs -z3 co -d oskit-mach gnumach + +**_Gnu Mach:_** + +All development, apart from critical bug fixes, is done on the upcoming 2.0 release. Previously the oskit-branch of gnumach. + + cvs -z3 co -d gnumach In case you have been tracking the oskit-branch and want to move to the current HEAD branch you can issue the following instead to update your tree. cvs -z3 update -r HEAD -Pd - Followed by regular updates without the '-r HEAD' +**_The Hurd servers:_** + +In case you want to build the Hurd servers as well, you can check them out too: + + cvs -z3 co hurd + +**_Inteface generator:_** + +See the [[MachInterfaceGenerator]] for more information. + +Check it out using + + cvs -z3 co mig ## Building -### OSKit +### The OSKit The attached [[ATTACHURLmodulesx86pc]] file is my personal setup, it works for me. Now, how to configure and build the OSKit. -Configuring: +**_Configuring:_** # cd oskit-20020317/ # mkdir build # cd build # ../configure --prefix=/usr/local --enable-debug -Building: +**_Building:_** # make # sudo make install @@ -59,14 +80,14 @@ To build any Mach kernel you need an interface generator, a mig. If your host sy This will install the i386-gnu-mig in /usr/bin for you. -Configuring: +**_Configuring:_** # cd oskit-mach # mkdir build # cd build # CFLAGS="-g" MIG=i386-gnu-mig OSKIT_LIBDIR=/usr/local/lib/oskit ../configure --prefix=/gnu --enable-debug -Building: +**_Building:_** # make # sudo make install @@ -76,7 +97,7 @@ Building: For now, see the [[RemoteDebugOskitMach]] page. -# Attachments +## Attachments * [[ATTACHURLmodulesx86pc]]: Modules to build in OSKit -- cgit v1.2.3