From 19e8c3558e215189e9e5483ea0344bcac61a42dd Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Fri, 10 May 2013 20:40:38 +0200 Subject: AHCI driver pushed --- faq/sata_disk_drives.mdwn | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/faq/sata_disk_drives.mdwn b/faq/sata_disk_drives.mdwn index 70560f12..4864e35b 100644 --- a/faq/sata_disk_drives.mdwn +++ b/faq/sata_disk_drives.mdwn @@ -12,8 +12,6 @@ License|/fdl]]."]]"""]] [[!meta title="Are SATA disk drives supported?"]] -GNU Mach does not support SATA disk drives (`/dev/sda` etc. in GNU/Linux) -natively, so using `device:sd0s1` will not work, as sd* devices are for SCSI -drives only. -The only way to get those drives to work is to put them into compatibility mode -in the BIOS, if such an option exists. GNU Mach will then recognize them as hda etc. +Until recently, GNU Mach did not support SATA disk drives (`/dev/sda` etc. in GNU/Linux) natively, the only way to get those drives to work used to be to put them into compatibility mode in the BIOS, if such an option exists. GNU Mach will then recognize them as hd etc. + +An AHCI driver has been added on 10th May 2013, which should bring support for a wide range of SATA controlers. Please however make sure to configure the BIOS in AHCI mode (as opposed to RAID mode). -- cgit v1.2.3