From 197263d381342d14ed383ea756d26fb5f7439b0e Mon Sep 17 00:00:00 2001 From: GNU Hurd wiki engine Date: Fri, 21 Sep 2007 18:52:36 +0000 Subject: web commit by clearer --- microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn b/microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn index 27052bad..1bf65297 100644 --- a/microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn +++ b/microkernel/mach/gnumach/hardwarecompatibilitylist.mdwn @@ -69,4 +69,4 @@ These boards or hardware combination are known to fail with gnumach/Hurd. * ASUS P5A motherboard and AMD K6-2 333MHz CPU - Debian GNU/Hurd will install but not boot on this board * ASUS P2B-LS motherboard with an Intel PII-MMX 400 MHz CPU - this board had a defective onboard NIC (that could not be disable in BIOS) and working 3COM Etherlink III NIC in a PCI bus slot. This combination worked with GNU/Linux. The 3COM NIC is known to work with the Hurd. However, while gnumach/Hurd will boot on this system, it is confused by the defective onboard NIC and unable to use the 3COM NIC. Attempting to start networking generates a continous stream of eth0 and eth1 reset messages on the console that renders the system unusable. - +* ASrock 775Twins-HDTV with a Pentium D 810 (533 MGz FSB/2600GHz core -- information no longer present on intel's site). Installs but does not boot. -- cgit v1.2.3