summaryrefslogtreecommitdiff
path: root/open_issues
diff options
context:
space:
mode:
Diffstat (limited to 'open_issues')
-rw-r--r--open_issues/anatomy_of_a_hurd_system.mdwn19
-rw-r--r--open_issues/clock_gettime.mdwn8
-rw-r--r--open_issues/dde.mdwn10
-rw-r--r--open_issues/glibc.mdwn39
-rw-r--r--open_issues/glibc/debian/experimental.mdwn9
-rw-r--r--open_issues/multithreading.mdwn17
-rw-r--r--open_issues/nightly_builds_deb_packages.mdwn850
-rw-r--r--open_issues/performance.mdwn19
-rw-r--r--open_issues/performance/io_system/read-ahead.mdwn10
-rw-r--r--open_issues/ti-rpc_then_nfs.mdwn27
-rw-r--r--open_issues/versioning.mdwn5
-rw-r--r--open_issues/virtualization/fakeroot.mdwn31
12 files changed, 1040 insertions, 4 deletions
diff --git a/open_issues/anatomy_of_a_hurd_system.mdwn b/open_issues/anatomy_of_a_hurd_system.mdwn
index 33635b80..932e11a6 100644
--- a/open_issues/anatomy_of_a_hurd_system.mdwn
+++ b/open_issues/anatomy_of_a_hurd_system.mdwn
@@ -1327,3 +1327,22 @@ Actually, the Hurd has never used an M:N model. Both libthreads (cthreads) and l
<teythoon> load it from grub instead of /hurd/ext2fs.static
<teythoon> look at the grub config for how this is done
<teythoon> let me know if it worked ;)
+
+
+# IRC, freenode, #hurd, 2014-03-04
+
+ <bwright> Can I run a single instance of hurd on multiple computers
+ <bwright> With them acting as different servers?
+ <braunr> no
+ <bwright> Like the fs server on one pc etc.
+ <bwright> Which os could I do this with?
+ <bwright> I assumed Mach RPC would support that.
+ <braunr> it can
+ <braunr> but we don't use it that way
+ <braunr> plan9 is probably better suited to what you want
+ <braunr> inferno too
+ <braunr> maybe dragonflybsd
+ <bwright> Yep.
+ <bwright> irAwesome.
+ <bwright> Plan9 is exactly it.
+ <braunr> enjoy
diff --git a/open_issues/clock_gettime.mdwn b/open_issues/clock_gettime.mdwn
index baa21bbb..407a104c 100644
--- a/open_issues/clock_gettime.mdwn
+++ b/open_issues/clock_gettime.mdwn
@@ -338,3 +338,11 @@ In context of [[select]].
anyway :)
<desrt> (although it will soon...)
<braunr> nice
+
+
+## IRC, freenode, #hurd, 2014-03-05
+
+ <desrt> braunr: bit of a warning: i released the glib that depends on
+ working pthread_condattr_setclock(..._MONOTONIC) and pochu said that it
+ will be landing in debian within the next days
+ <braunr> desrt: ok
diff --git a/open_issues/dde.mdwn b/open_issues/dde.mdwn
index 9d8bf509..e7083557 100644
--- a/open_issues/dde.mdwn
+++ b/open_issues/dde.mdwn
@@ -614,6 +614,16 @@ In context of [[libpthread]].
<braunr> primitives*
+## IRC, freenode, #hurd, 2014-03-08
+
+ <gg0> what to do if network freezes?
+ <teythoon> gg0: depends on what caused the freeze
+ <teythoon> gg0: you could try to kill the netdde process
+ <gg0> it's just apt-get'ing, download phase
+ <braunr> yess kill netdde
+ <braunr> there are known deadlocks in netdde
+
+
# IRC, freenode, #hurd, 2012-08-18
<braunr> hm looks like if netdde crashes, the kernel doesn't handle it
diff --git a/open_issues/glibc.mdwn b/open_issues/glibc.mdwn
index 4dad229f..ad7b3c72 100644
--- a/open_issues/glibc.mdwn
+++ b/open_issues/glibc.mdwn
@@ -1855,6 +1855,45 @@ Last reviewed up to the [[Git mirror's 64a17f1adde4715bb6607f64decd73b2df9e6852
<braunr> teythoon: i think it should be in glibc
<braunr> maybe in mach/
+ * POSIX record locking
+
+ IRC, freenode, #hurd, 2014-02-27:
+
+ <azeem_> tschwinge: schould POSIX record locking be on
+ http://darnassus.sceen.net/~hurd-web/open_issues/glibc/#missing
+ as well. or is that strictly a Hurd thing? (I don't remember)
+ <tschwinge> azeem_: Neither do I :-), but I'll have a look later
+ on.
+
+ * <a name="execve_relative_paths">`execve` with relative paths</a>
+
+ [[!GNU_Savannah_bug 28934]], [[user/pochu]], [[!message-id
+ "4BFA500A.7030502@gmail.com"]].
+
+ IRC, freenode, #hurd, 2014-03-05:
+
+ <teythoon> youpi: what about the exec_filename patch series? [...]
+ <youpi> Roland was disagreeing with it
+
+ * <a name="mount">`mount`/`umount`</a>
+
+ IRC, freenode, #hurd, 2014-03-01:
+
+ <gnu_srs1> Hi, how to handle packages depending on mount.h, et al?
+ On Hurd mount/umount is supplied by hurd is not in libc?
+ <azeem> gnu_srs1: mount or mount.h?
+ <gnu_srs1> mount.h et al
+ <gnu_srs1> man 2 mount
+ <azeem> what is the question then?
+ <gnu_srs1> some packages expect the mount 2 functionality
+ available, not by the external command mount/umonut
+ <gnu_srs1> umount*
+ <gnu_srs1> azeem: one example is fuse
+ <teythoon> gnu_srs1: that is correct
+ <teythoon> gnu_srs1: i put a small hacks entry in the list about
+ moving the mount/umount functionality from our utilities to the
+ libc
+
For specific packages:
* <a id=octave>[[octave]]</a>
diff --git a/open_issues/glibc/debian/experimental.mdwn b/open_issues/glibc/debian/experimental.mdwn
index 273f02fd..4ae9807b 100644
--- a/open_issues/glibc/debian/experimental.mdwn
+++ b/open_issues/glibc/debian/experimental.mdwn
@@ -225,6 +225,15 @@ Now in unstable.
<braunr> ok that mmap fix looks fine, i'll add comments and commit it soon
+## IRC, freenode, #hurd, 2014-03-03
+
+ <youpi> braunr: did you test whether
+ https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=17db6e8d6b12f55e312fcab46faf5d332c806fb6
+ does indeed fix locale generation?
+ <braunr> youpi: it doesn't, which is why i applied
+ http://git.sceen.net/hurd/glibc.git/commitdiff/da2d6e677ade278bf34afaa35c6ed4ff2489e7d8?hp=9a079e270a9bec7e1fe28aeda63e07c1bb808d44
+
+
# IRC, OFTC, #debian-hurd, 2013-06-20
<youpi> damn
diff --git a/open_issues/multithreading.mdwn b/open_issues/multithreading.mdwn
index d5c0272c..a66202c8 100644
--- a/open_issues/multithreading.mdwn
+++ b/open_issues/multithreading.mdwn
@@ -561,6 +561,23 @@ Tom Van Cutsem, 2009.
<teythoon> ^^
+### IRC, freenode, #hurd, 2014-03-02
+
+ <youpi> braunr: what is the status of the thread storm issue? do you have
+ pending code changes for this?
+ <youpi> I was wondering whether to make ext2fs use adaptative locks,
+ i.e. spin a bit and then block
+ <youpi> I don't remember whether anybody already did something like that
+ <braunr> youpi: no i don't
+ <braunr> youpi: i attempted switch from spin locks to mutexes once but it
+ doesn't solve the problem
+ <braunr> switching*
+ <gg0> found another storm maker:
+ <gg0> $ dpkg-reconfigure gnome-accessibility-themes
+ <gg0> aka update-icon-caches /usr/share/icons/HighContrast
+ <youpi> braunr: ok
+
+
## Alternative approaches:
* <http://www.concurrencykit.org/>
diff --git a/open_issues/nightly_builds_deb_packages.mdwn b/open_issues/nightly_builds_deb_packages.mdwn
index da7bdc7d..fc9c2f18 100644
--- a/open_issues/nightly_builds_deb_packages.mdwn
+++ b/open_issues/nightly_builds_deb_packages.mdwn
@@ -108,3 +108,853 @@ See also [[nightly_builds]].
<pere> I would like to see something like <URL:
http://jenkins.debian.net/view/g-i-installation/job/g-i-installation_debian_sid_daily_lxde/lastBuild/
> for hurd.
+
+
+## IRC, OFTC, #debian-hurd, 2014-02-26
+
+ * gg0 setting up jenkins, almost time to give up
+ <pere> gg0: why do you set up jenkins?
+ <gg0> because i want to fail at doing all things, not just something ;)
+ <gg0> oops seems my setup just sent emails to jenkins+debian-qa
+ holger@layer-acht.org :/
+ <pere> #debian-qa will understand. :)
+
+
+## IRC, OFTC, #debian-hurd, 2014-02-27
+
+ <gg0> almost managed to multiboot
+ <gg0> it gets stuck at "start ext2fs.static"
+ <gg0> any idea?
+ <teythoon_> multiboot what ?
+ <pere> gg0: that sound like the race blocking boot some times.
+ <teythoon_> no
+ <teythoon_> that'd print more
+ <gg0> teythoon: booting hurd with qemu without grub
+ <teythoon> oh cool
+ <teythoon> can you paste your qemu arguments somewhere ?
+ <azeem> probably ext2fs.static got passed a wrong commandline?
+ <gg0> they are the grub ones but gnumach needs to be uncompressed
+ <gg0> otherwise qemu complains saying linux kernel is too old
+ <teythoon> yes, i got past that one
+ <teythoon> but my qemu keeps crashing
+ <teythoon> can you please paste the command you used ?
+ <gg0> "qemu: linux kernel too old to load a ram disk"
+ <gg0> well, my fun level would really decrease :)
+ <azeem> if you pasted the commands you used?
+ <youpi> gg0: if it talks about "linux", it's not actually using multiboot
+ <gg0> azeem: yep :)
+ <gg0> youpi: i think it just can't distinguish, btw bt uncompressing it, it
+ boots
+ <youpi> gg0: well, "any idea?" means you are requesting help
+ <youpi> but without pasting the line, we can't divine what can be going
+ wrong
+ <youpi> gg0: well, if it can't see that gnumach *can* handle multiboot
+ modules, qemu is very broken
+ <gg0> modules are all loaded, multiboot options seems working well
+ <gg0> ie. -initrd "file1 arg=foo,file2"
+ <azeem> arg=foo?
+ <teythoon> fwiw, i tried http://paste.debian.net/84408/
+ kvm -m 256 \
+ -kernel gnumach \
+ -append 'gnumach root=device:hd0s1' \
+ -initrd "0.master/hurd/ext2fs.static ext2fs \
+ --multiboot-command-line='\${kernel-command-line}' \
+ --host-priv-port='\${host-port}' \
+ --device-master-port='\${device-port}' \
+ --exec-server-task='\${exec-task}' -T typed device:hd0s1 \
+ '\$(task-create)' '\$(task-resume)',\
+ 0.master/lib/ld.so.1 exec /hurd/exec '\$(exec-task=task-create)'" \
+ -drive 'file=/media/pool/hurd-tests/image.qcow2,cache=writeback' -snapshot
+ <gg0> http://postimg.org/image/esywbywh9/
+ <gg0> azeem: pasted from man qemu
+ <gg0> here screenshot ^
+ <teythoon> is this the stock debian ext2fs.static ?
+ <azeem> gg0: are the ext2fs.static arguments cutoff at
+ "-exec-server-[...]"?
+ <gg0> teythoon: yes, everything from last CD image
+ <teythoon> which you copied to the host ?
+ <gg0> azeem: as you can see just below --exec-server-task=3
+ <gg0> teythoon: loop mounted, like jenkins does
+ <teythoon> ok
+ <teythoon> the early hurd bootstrap code is very delicate
+ <teythoon> and often, the bootstrap just hangs with no indication why
+ <teythoon> we won't even notice the rootfs or the exec server crashing for
+ example
+ <gg0> replace gnumach, initrd.gz, ext2fs.static, ld.so.1 paths with yours:
+ <gg0> --kernel gnumach --initrd "initrd.gz initrd
+ \$(ramdisk-create),ext2fs.static ext2fs
+ --multiboot-command-line=\${kernel-command-line}
+ --host-priv-port=\${host-port} --device-master-port=\${device-port}
+ --exec-server-task=\${exec-task} -T typed gunzip:device:rd0
+ \$(task-create) \$(task-resume),ld.so.1 exec /hurd/exec
+ \$(exec-task=task-create)"
+ <teythoon> you are missing the kernel command line, no?
+ <gg0> teythoon: afaiu it takes it at runtime from itself if any
+ <gg0> if anyone passes --append
+ <gg0> in pasted screenshot i pass desktop=lxde
+ <gg0> need to pass something like gunzip:device:rd0? on cd image it doesn't
+ pass anything
+ <youpi> no, it's already passed to ext2fs in the multiboot command line
+ <gg0> ok
+ <gg0> -T typed
+ <teythoon> i do not see any significant difference between your arguments
+ and mine
+ <teythoon> for me, kvm/qemu still crashes
+ <teythoon> % kvm --version
+ <teythoon> QEMU emulator version 1.1.2 (qemu-kvm-1.1.2+dfsg-6, Debian),
+ Copyright (c) 2003-2008 Fabrice Bellard
+ <gg0> teythoon: i don't have any "'" :) and too many gnumach, one in append
+ too
+ <teythoon> yes
+ <teythoon> but that shouldn't cause kvm to crash
+ <gg0> oh
+ <gg0> here QEMU emulator version 1.7.0 (Debian 1.7.0+dfsg-3)
+ <gg0> jessie on amd64
+ <gg0> seems quite older
+ <teythoon> indeed
+ <gg0> wheezy vs current jessie
+ <teythoon> yes
+ <gg0> teythoon: qemu 1.7.0 is on wheezy-backports
+ <gg0> anyone tried to reproduce it?
+
+
+## IRC, freenode, #hurd, 2014-02-27
+
+ <gg0> options to boot hurd with qemu multiboot:
+ <gg0> 17:54 < gg0> replace gnumach, initrd.gz, ext2fs.static, ld.so.1 paths
+ with yours:
+ <gg0> 17:54 < gg0> --kernel gnumach --initrd "initrd.gz initrd
+ \$(ramdisk-create),ext2fs.static ext2fs
+ --multiboot-command-line=\${kernel-command-line}
+ --host-priv-port=\${host-port} --device-master-port=\${device-port}
+ --exec-server-task=\${exec-task} -T typed gunzip:device:rd0
+ \$(task-create) \$(task-resume),ld.so.1 exec /hurd/exec
+ \$(exec-task=task-create)"
+ <gg0> gnumach needs to be uncompressed
+ <gg0> this gets stuck at "start ext2fs.static:"
+ <teythoon> indeed, same for me
+ <braunr> i strongly suspect qemu multiboot support to be incomplete
+ <braunr> i couldn't make it work well enough with x15 either
+ <gg0> if gnumach is compressed, "qemu: linux kernel too old to load a ram
+ disk"
+ <braunr> i think that's a grub specific feature
+
+
+## IRC, freenode, #hurd, 2014-02-28
+
+ <gg0> start ext2fs.static2: ext2fs: device:rd0: panic: get_hypermetadata:
+ bad magic number 0xd7f0 (should be 0xef53)
+ <gg0> \o/ it boots
+ <teythoon> gg0: what was wrong ?
+ <gg0> --kernel /path/to/uncompressed-gnumach --initrd "/path/to/initrd.gz
+ \$(ramdisk-create),/path/to/ext2fs.static
+ --multiboot-command-line=\${kernel-command-line}
+ --host-priv-port=\${host-port} --device-master-port=\${device-port}
+ --exec-server-task=\${exec-task} -T typed gunzip:device:rd0
+ \$(task-create) \$(task-resume),/path/to/ld.so.1 /hurd/exec
+ \$(exec-task=task-create)"
+ <teythoon> gg0: uh, using absolute paths fixes this ?
+ <gg0> teythoon: not necessary, just to be clearer
+ <gg0> solved by removing initrd between initrd.gz and ramdisk-create, and
+ ext2fs between ext2fs.static and multiboot-command-line
+ <gg0> also exec between ld.so.1 and /hurd/exec
+ <teythoon> gg0: oh, i see
+
+
+## IRC, OFTC, #debian-hurd, 2014-02-28
+
+ <gg0> --kernel /path/to/uncompressed-gnumach --initrd "/path/to/initrd.gz
+ \$(ramdisk-create),/path/to/ext2fs.static
+ --multiboot-command-line=\${kernel-command-line}
+ --host-priv-port=\${host-port} --device-master-port=\${device-port}
+ --exec-server-task=\${exec-task} -T typed gunzip:device:rd0
+ \$(task-create) \$(task-resume),/path/to/ld.so.1 /hurd/exec
+ \$(exec-task=task-create)"
+ <gg0> multiboot works
+ <pere> cool.
+ <pere> gg0: are you able to feed the installer one of the preseed files at
+ <URL: http://jenkins.debian.net/d-i-preseed-cfgs/ >?
+ <gg0> though jenking translates double quotes, need to escape the world
+ <pere> debian_sid_daily_lxde_preseed.cfg seem like a good candiate. :)
+ <gg0> pere: i'm working on that, stuck at working around that mandatory
+ double quote
+ <gg0> *initrd double quote
+ <youpi> gg0: could you paste your command line on the hurd wiki?
+ <gg0> ok got a g-i-installation_debian_sid_daily_hurd_lxde able to boot
+ <gg0> let's provide a preseed
+ <gg0> shouldn't there be some info/debug consoles from tty 2 to 4?
+ <youpi> there should be
+ <gg0> maybe i can't send alt+NUM from vlc
+ <youpi> ah, yes
+ <youpi> you need to use the menu for that
+ <youpi> press f8
+ <gg0> great
+ <gg0> (found out C+A+{1,2,3} give interesting monitor,serial,parallel
+ consoles btw)
+ <gg0> not much options on menu
+ <gg0> just clipboard management, quit, full screen, send ctrl-alt-del, send
+ F8
+ * gg0 takes "great" back
+ <gg0> i guess it depends on vnc implementation
+ <gg0> don't ask me how i found out one can switch console with
+ ... left/right arrow keys
+ <youpi> without alt pressed?
+ <gg0> without alt pressed
+ <youpi> I've already seen that with qemu, when focusing into/out from the
+ qemu window by using alt
+ <youpi> somehow the alt state gets stuck
+ <gg0> so you mean if i close viewer then reattach it, it doesn't happen
+ anymore? let's see
+ <gg0> you're right
+ <gg0> though yes alt+left/right switches consoles
+ <youpi> the last is expected :)
+ <gg0> it says kbd-udeb doesn't exist so it falls back to
+ hurd-debian-ports-udeb
+ <youpi> that's not a problem
+ <gg0> no partman-auto?
+ <youpi> it should be working
+ <gg0> i meant if it was installed but yes it gets it along with others
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-01
+
+ <gg0> partman-auto would need to be patched to be able to discover
+ available disks
+ <gg0> worked around by forcing /dev/hd1, jenkins creates disk with index=1
+ <gg0> stuck at installation-report installed. seems it can't manage to
+ umount(then remount) /cdrom gracefully
+ <gg0> or better it gets stuck at apt-cdrom ident
+ <gg0> something like https://bugs.debian.org/598457
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-02
+
+ <gg0> teythoon: curiosity, correct qemu multiboot options still make old
+ qemu crashing?
+ <teythoon> gg0: no idea, i'll try it later
+
+ <gg0> youpi: any chance to have monthly/weekly (daily would be too much i
+ guess) isos/images? can i help somehow?
+ <youpi> I am wondering why having that
+ <youpi> since we have up-to-date mirrors
+ <gg0> i'd say to install with latest installer/gnumach/hurd/eglibc
+ <youpi> so that means also rebuilding the d-i image
+ <gg0> and in general to not have to manually produce them
+ <pere> youpi: the point is to automatically test the current images using
+ jenkins.debian.net, I believe. for that to work, current images need to
+ exist. :)
+ <gg0> not only. i think saving youpi's time is also important
+ <youpi> gg0: it doesn't really take me much time to generate images
+ <youpi> it's about a few command lines to start, and then work on something
+ else :)
+ <gg0> well though it still requires manual intervention which is not
+ scheduled and also error prone btw
+ <youpi> gg0: I guess the most important help you could provide would be to
+ actually track when the autobuild breaks :)
+ <gg0> what pros keeping it manual? i don't think disk space saving
+ <youpi> it's not really a question of manual, but the frequency
+ <youpi> I prefer to test manually before uploading something on my
+ somehow-official directory on people, anyway
+ <youpi> but that doesn't mean we can't have weekly builds somewhere else
+ indeed
+ <youpi> it's just that for tests it's good to have several images backlog,
+ but then it takes disk
+ <gg0> well we could keeping "official" ones + say 6 monthly and say 4
+ weekly
+ * gg0 randomizes retention
+ <gg0> -ing
+ <teythoon> gg0: check out my hurdtest program
+ <teythoon> it updates qemu images automatically, and runs a test suite,
+ creates snapshots
+ <gg0> youpi: you'd just take actually care of official ones
+ <teythoon> and it can zero-fill the disk images to compact them for
+ publication
+ <youpi> gg0: and have a cron for the others
+ <youpi> on mirror.ftp-master
+ <gg0> nice, we already have a disk image generator then
+ <teythoon> i shall clean it up and merge stuff that i have changed locally
+ <teythoon> i covered it in my early blog posts
+ <teythoon> i use it extensively to test the packages from hurd-ci
+ <gg0> great. so usually at this point /me can't do anything so good work!
+ lol
+ <youpi> crontabs are in place, scheduled on monday mornings
+ <youpi> I have already completed a run, can be seen in weekly-0
+ <gg0> great!
+ <gg0> assuming it will work forever without maintenance, how many minutes
+ you'll save per month? :)
+ <youpi> I don't think that'll save me time per month
+ <youpi> since it's just an additional thing
+ <gg0> youpi: so weekly-0 will always be the latest weekly (same about
+ monthly) ?
+ <youpi> yes
+ <gg0> how about adding -YYYYMMDD after -1 CD/DVD/NETINST number?
+ <youpi> that'd mean more scripting
+ <gg0> just to distinguish them
+ <youpi> we already have timestamps from the server
+ <gg0> unfortunately i can't script myself, i can suggest though :)
+ <gg0> or scripts are available somewhere?
+ <gg0> so current/ should be a link to weekly-0?
+ <youpi> on mirror.ftp-master.debian.org, but I guess you don't have access
+ to it
+ <youpi> no
+ <youpi> definitely no
+ <youpi> the point of current/ is to have something tested
+ <gg0> ok
+ <youpi> while weekly/monthly are most probably to get broken
+ <youpi> so let's not point people at that
+ <gg0> same story about diskimage? how do you generate them?
+ <gg0> how about teythoon's way?
+ <youpi> I do it by hand at the moment, but scripts would be welcome indeed
+ <youpi> http://people.debian.org/~sthibault/hurd-i386/debian-hurd.img.txt
+ <gg0> ok now stuck at grub install
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-03
+
+ <gg0> i probably should force /dev/hd0 as i did for /dev/hd0s1 as root
+ device
+ <gg0> if it's possible
+ <youpi> what do you mean by forcing /dev/hd0s1 as root device ?
+ <youpi> you shouldn't have to do that
+ <youpi> my fear is that these additional images will mostly just bring
+ additionnal reports
+ <gg0> i had to specify it in preseed
+ <youpi> which won't really decrease the amount of work
+ <gg0> as partman-auto/disk
+ <gg0> it can recognize available disks
+ <gg0> that's also because it can't list root partitions on rescue mode
+ <youpi> well, all I can say without having (again) to spend time on it, is
+ that you're not supposed to have to do that
+ <youpi> why are you using rescue mode?
+ <youpi> if it can't list root partitions, then of course partman can't work
+ <gg0> well, rescue mode should work
+ <youpi> if you delve into non-tested parts of d-i, you'll surely encounter
+ bugs
+ <youpi> well, less "should" than plain "d-i"
+ <youpi> in that I've never really tested it
+ <youpi> so don't be surprised that some bugs remain
+ <gg0> no problem
+ <youpi> but again, we don't really need more bug reports
+ <youpi> but rather bug fixing
+ <youpi> we already have enough to fix, no need to delve into advanced
+ things
+ <gg0> sure, i'm just trying to make it work with all its limitations
+ <gg0> it autopartition the disk well, it can't just make one choose among
+ disks because it can't probe and list them
+ <youpi> then fix the probe & list
+ <gg0> i'd like doing it, i'm better at working around for now though :)
+ <gg0> one blocker is mount/umount stuff
+
+[[glibc#mount]].
+
+ <youpi> well, you'll have to get into fixing bugs for real someday
+ <youpi> otherwise this is just adding to TODO lists
+ <youpi> what mount/umount stuff?
+ <gg0> (took a quick look at partconf)
+ <gg0> non-existent mount.h for instance
+ <gg0> do we have replacements?
+ <youpi> not that I know of
+ <gg0> 21:53 < teythoon> gnu_srs1: i put a small hacks entry in the list
+ about moving the mount/umount functionality from our utilities to the
+ libc
+ <youpi> ok
+ <gg0> another thing i'd really like to see would be a physical shutdown,
+ halt-hurd which actually poweroffs the system
+ <gg0> how to switch to sysvinit by default? next sysvinit upload?
+ <youpi> physical shutdown means implementing APM or ACPI
+ <gg0> have to teach jenkins it can shut it down :/
+ <youpi> I'm extremely far from having the will for this
+ <youpi> switching to sysvinit by default is a matter of saying that we want
+ to do it
+ <youpi> I already asked for this on the list without answer IIRC
+ <gg0> i can't find anything
+ <youpi> anyway, just propose on the list
+ <gg0> d-i grub-installer/bootdev string /dev/hd0 - here it is
+ <gg0> next run should not need any interaction, though it needs 20 mins to
+ understand it has to destroy it and run won't be successful :/
+ <gg0> due to missing acpi/apm
+ <gg0> first graphical automated install http://postimg.org/image/vgagj06q7/
+ <gg0> it seems 720x400
+ <gg0> though jenkins passes video=vesa:ywrap,mtrr vga=788
+ <gg0> by reconnecting it switched to 800x600
+ http://postimg.org/image/h32qjykrx/
+ <gg0> but seems stuck now and i can't even switch from graphical to
+ consoles
+ <gg0> unusually stuck at scanning cdrom
+ <gg0> i'll check text install to see if it gets stuck there too
+ <gg0> text install switches from 720x400 to 640x400
+ <gg0> i confirm it gets stuck on scanning cdrom, i guess because of this
+ one https://bugs.debian.org/728153 which already broke load-install-cd i
+ already had to workaround
+ <pere> gg0: are you in contact with h01ger to update jenkins.debian.net
+ with your cool installation code?
+ <gg0> pere: still trying to have something working
+ <gg0> plus with new weekly cd, apt-cdrom bug makes install getting stuck at
+ first Scanning cdrom:
+ <gg0> 03:44 < gg0> i confirm it gets stuck on scanning cdrom, i guess
+ because of this one https://bugs.debian.org/728153 which already broke
+ load-install-cd i already had to workaround
+ <youpi> do we really need the CD-1 image in weekly builds?
+ <gg0> just netinst?
+ <youpi> yes
+ <gg0> well, i don't know debian installer well. what's the difference
+ between CD and NETINST besides that CD has more packages user doesn't
+ need to download?
+ <gg0> has CD anything not in NETINST which is worth to continously test?
+ (talking about jenkins)
+ <youpi> that's only it, yes
+ <gg0> btw new ACPI on hurd consists of serial console to file + looping
+ grep "In tight loop: hit ctl-alt-del to reboot" && kill qemu
+ <gg0> anything better?
+ <gg0> filed http://bugs.debian.org/740673
+ <gg0> without a patch just to express my great laziness :p
+ <youpi> well, I'm afraid nobody in the debian-boot team will attempt
+ anything at this
+ <youpi> is it reproducible on linux?
+ <gg0> nope
+ <gg0> my guess is that's due to udev, need a deeper check btw
+ <gg0> i mean non-udev cases like hurd maybe are not handled well
+ <youpi> maybe try on kfreebsd then?
+ <gg0> just guessing
+ * gg0 trying on kfreebsd
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-04
+
+ <gg0> hurd install started getting stuck running os-prober, final grub
+ install phase
+ <gg0> youpi: yes i confirm it affects kfreebsd too
+ <youpi> then please say so in the bug
+ <youpi> otherwise most probably but me in the debian-boot team will care
+ <youpi> +nobody
+ <gg0> that might get more attention from d-boot team?
+ <gg0> ok
+ <youpi> also Cc debian-bsd@
+ <youpi> they will care
+ <youpi> and tell about the hint as being the non-udev case
+ <youpi> too much information or ideas is never a bad thing :)
+ <gg0> done
+ <gg0> (now i know notfound does remove found versions instead of adding
+ notfound versions)
+ <gg0> crazy things. to unblock os-prober i had to settrans -fg
+ /target/media/./cdrom0
+ <gg0> it was mounting /dev/hd0s1 ...
+ <gg0> i suspect apt-cdrom is to blame again
+ <gg0> ok now jenkins just managed to start the installed system
+ <gg0> and it's configured to make vncdo testing it
+ <gg0> i'd need a graphical-working cd with old-apt to continue
+ <gg0> let's try to install old apt on weekly-0
+ <gg0> "cdrom drive contains a cd which cannot be used for installation"
+ <gg0> i think a sort of non-authenticated anymore
+ <gg0> ehm.. http://paste.debian.net/plain/85224/
+ <pere> gg0: nice. :)
+ <gg0> with apt 0.9.15.1 which should be good
+ <gg0> pere: it did mount /dev/hd0s1 under /media/cdrom0
+ <gg0> 0.9.15.5, correctly i think, asks to insert it cdrom. but finally
+ both mount /dev/hd0s1 instead of /dev/hd2
+ <gg0> -it
+ <gg0> cause they both can't detect where cdrom is i guess
+
+
+## IRC, freenode, #hurd, 2014-03-04
+
+ <gg0> we could talk about apt-cdrom https://bugs.debian.org/740673
+ <gg0> how should system recognize cdrom device?
+ <gg0> there's no /dev/cdrom link to actual cdrom device
+ <gg0> /dev/cd[01] are scsi devices if i'm not wrong
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-05
+
+ <gg0> installer gets stuck running os-prober, seems because
+ /target/proc/mounts gets unreadable, sometimes Resource lost sometimes it
+ gets stuck reading it
+
+[[hurd/translator/mtab/discussion#chroot]].
+
+ <gg0> youpi: could you publish script to rebuild CDs you scheduled? with
+ last official CD (20140212) mtab on /target dies and that seems getting
+ os-prober stuck. last (and only) weekly has recent apt-cdrom so it gets
+ stuck wrongly asking to change cdrom
+ <youpi> see the readme file
+ <youpi> err, you say it's the 0212 build which fails?
+ <youpi> I had tested that before uploading
+ <youpi> so the issue comes form the installed packages, not from the CD
+ udebs
+ <youpi> did you test with no network mirror?
+ <gg0> no i didn't. should it find all packages it needs from cd?
+ <youpi> sure, that's what netinst and dvd-1 are, as opposed to netboot
+ <gg0> lxde desktop probably not
+ <youpi> indeed
+ <youpi> though with the dvd in principle it should
+ <youpi> (if all deps were avaijlable at image build time)
+ <youpi> gg0: btw if you haven't noticed, there's a daily too
+ <gg0> youpi: till apt-cdrom is not fixed, they all will be broken, stuck at
+ "Scanning cdrom"
+ <youpi> gg0: did you try to bisect which git change produces the apt-cdrom
+ bug?
+ <gg0> youpi: all in bug in question
+ <gg0> youpi: https://bugs.debian.org/740673
+ <youpi> is there the precise git commit id in the bug log?
+ <gg0>
+ http://anonscm.debian.org/gitweb/?p=apt/apt.git;a=commitdiff;h=62dcbf84c4aee8cb01e40c594d4c7f3a23b64836
+ <youpi> well, don't tell that to just me, but the bug report...
+ <gg0> bug report says "See <bug>" where bug is
+ https://bugs.debian.org/728153
+ <youpi> gg0: bug report doesn't say it was *tested* that it is that changes
+ which broke things
+ <gg0> i don't think we could get it reverted just because it breaks hurd
+ (+kfreebsd to check) debian installer
+ <youpi> of course, but that's at least where developers can have a look at
+ <gg0> well ok i could have been more clear
+ <youpi> it's *WAY* better than having no idea where to have a look at
+ <youpi> gg0: btw, that's why the README file advises not to use a network
+ mirror, to avoid such kind of issues
+ <youpi> you can't expect sid not to be not-broken :)
+ <gg0> one gets Resource lost even when install is just started, no packages
+ from any mirror
+ <gg0> https://bugs.debian.org/740673#19
+
+ * gg0 installing without mirrors, without desktop, without lxde
+ <gg0> same problem
+ <gg0> so problem has nothing to do with installing from mirrors
+ <youpi> what's odd is that I don't get this issue at all with the 20140212
+ upload at least
+ <youpi> kvm -cdrom debian-7.0-hurd-i386-NETINST-1.iso -drive
+ file=blip,cache=unsafe -m 1G
+ <youpi> no more, no less
+ <gg0> it must depend on preseed and/or kernel append options
+ <youpi> possibly
+ <gg0> oh wait here qemu multiboot
+ <youpi> that shouldn't have any impact
+ <youpi> did you leave the command line somewhere on the wiki so I can try
+ with it, just to be sure?
+ <gg0>
+ http://darnassus.sceen.net/~hurd-web/hurd/running/qemu/#QEMU_Multiboot
+ <gg0> 5€ on qemu multiboot as the culprit
+ <gg0> you should also see it sometimes double-mounts /dev/hd0s1 under
+ /target and /target/./media/cdrom(!)
+ <gg0> but that's due to new apt it in-targets (= installs under /target)
+ <youpi> gg0: rather use the gnumach, ld.so and ext2fs.static from the ISO
+ image you are booting
+ <youpi> especially for ld.so, which has to be the same as the libc
+ installed in the initrd
+ <youpi> ah, you're getting the initrd there too
+ <youpi> well, really use the same as the ISO
+ <gg0> i already do
+ <youpi> ah, ok, so the wiki example is just with current
+ <youpi> but the wiki example doesn't use -cdrom to provide the ISO ?
+ <gg0> no it doesn't even mention you could also use a cdrom
+ <gg0> it just shows how to use qemu multiboot options
+ <youpi> it seems one have to avoid any blanks in the multiboot option
+ <youpi> notably before file names
+ <gg0> well, actually it works but it's rather incomplete
+ <youpi> well, it shows how to boot the installer
+ <youpi> not how to boot an installed system
+ <gg0> removed spaces, added <other_qemu_options> option
+ <gg0> here qemu binary is qemu-system-x86_64 instead of qemu-kvm and it
+ crashes without --enable-kvm
+ <gg0> qemu: fatal: Trying to execute code outside RAM or ROM at
+ 0x000000010010001e
+ <youpi> rather use qemu-system-i386
+ <gg0> i was just complaining i wrote qemu-kvm on wiki but i did never
+ actually run that command as is
+ <gg0> ouch right, -i386 doesn't require enable-kvm
+ <gg0> (i'll never know why)
+ <youpi> -x86_64 is buggued
+ <youpi> 0x000000010010001e should have been truncated to 0x0010001e since
+ it's 32bit mode
+ <gg0> i see
+ <gg0> any luck reproducing mtab issue?
+ <youpi> still not
+
+[[hurd/translator/mtab/discussion#chroot]].
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-06
+
+ <youpi> http://paste.debian.net/85535/
+ <youpi> no issue
+ <youpi> (no network mirror)
+ <gg0> full install till grub-installer?
+ <youpi> yes
+ <youpi> and reboot
+ <gg0> -append 'auto=true mirror/suite=sid console=com0 priority=critical
+ locale=en_US keymap=us
+ url=http://10.0.2.1//d-i-preseed-cfgs/debian_sid_daily_hurd_lxde_preseed.cfg
+ video=vesa:ywrap,mtrr vga=788 -- quiet'
+ <gg0> i should provide preseed too
+ <youpi> well, of course
+ <youpi> always provide as much information as possible
+ <youpi> so there's also your preseed file
+ <gg0> not much different from
+ http://jenkins.debian.net/d-i-preseed-cfgs/debian_sid_daily_lxde_preseed.cfg
+ <gg0> but you need to force a couple of things + ugly workaround for broken
+ apt-cdrom ident
+ <youpi> well, I didn't even know that jenkins had that pressed file
+ <youpi> well, here apt-cdrom is not needed
+ <youpi> +hacks
+ <youpi> since that's the old image we're checking
+ <gg0> well ok, given you take everything from cd only, yes
+ <gg0> here no mirror, no desktop, no lxde
+ http://paste.debian.net/plain/85538/
+ <gg0> i'm trying this one too
+ <gg0> main difference seems to be i usually use CD-1, not NETINST
+ <gg0> had to add -net nic,vlan=0 -net
+ user,vlan=0,host=10.0.2.1,dhcpstart=10.0.2.2,dns=10.0.2.254
+ <gg0> here target mtab is already crashed
+ <gg0> because some package already tried to read /target/proc/mounts
+ <gg0> youpi: reproduced there?
+ <gg0> .o(well, maybe he's been sleeping for ~50 mins)
+ <youpi> nope, I'm working on upgrading servers
+ <youpi> I'm sorry, but your testcase is not really easy to reproduce :)
+ <gg0> do you have apache on your host? just put preseed in the root, vm
+ will take it
+ <gg0> full command line is what you pasted + -net nic,vlan=0 -net
+ user,vlan=0,host=10.0.2.1,dhcpstart=10.0.2.2,dns=10.0.2.254
+ <gg0> what else? when it starts debstrapping, open a console and check
+ procfs and mtab processes
+ <gg0> err, what you paster + -append i pasted + -net nic,vlan=0 -net
+ user,vlan=0,host=10.0.2.1,dhcpstart=10.0.2.2,dns=10.0.2.254
+ <gg0> *pasted
+ <gg0> which is http://paste.debian.net/plain/85554/
+ <gg0> surely keyboard layout doesn't help, here at least
+ * gg0 tries to reproduce without preseed
+ <gg0> i can't reproduce it
+ <gg0> it doesn't crash
+ * gg0 enabling all options but preseed
+ <gg0> need to wait 31% of Installing base system to have the second procfs
+ <gg0> ok got Resource lost even without preseed
+ <gg0> youpi: you can reproduce it by adding -append console=com0 to what
+ you pasted. that breaks grub-installer, it gets stuck at 66%, while runs
+ os-prober
+ <youpi> ah
+ <gg0> how can that affect /target/proc/mounts?
+ <youpi> no idea
+ <gg0> couldn't daily be here? http://d-i.debian.org/daily-images/
+ <youpi> if I knew how to push files there, sure
+ <gg0> asking on #debian-boot would be a starting point i guess
+ <youpi> probably
+ <gg0> me asking on behalf of youpi would not a good one i think, given
+ whatever will the answer i can't do anything
+ <gg0> +be
+ <youpi> you can still trasmit me
+ <youpi> never understimate the little time you can save other people by
+ doing some bits of work
+ <gg0> well, i would not even have to repaste lines here given you joined
+ there too
+ <gg0> never understimate what "help with laziness" means :)
+ <youpi> not necessarily repasting, but at least highlighting me
+ <youpi> so I know where to read in the #d-b logs
+ <gg0> there are no isos there, i'm missing something
+ <youpi> there are no daily isos
+ <youpi> only weekly isos
+ <gg0> so seems i have to reask initial question with this url
+ http://cdimage.debian.org/cdimage/weekly-builds/
+ <gg0> oh wait they are from testing, that's why no hurd ones
+ <gg0> i guess they could be here though
+ http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/current/
+ * gg0 asking on #debian-cd
+ * gg0 would ignore non-DD gg0 asking whatever
+ <youpi> people don't really ask themselves who is a DD and who is not
+ <youpi> as long as you provide information in your question, it'll get
+ answered
+ <gg0> teythoon: interested in reproducing mtab-dying-under-chroot?
+ <gg0> oh just realized it's not only under a chroot, chroot is on another
+ disk. might that make the difference?
+ <gg0> i didn't try to reproduce it by creating a chroot on a different
+ disk, which is what installer does
+ * gg0 wonders if it would have been better filing a bug against
+ cdimage.debian.org
+ <gg0> if no one fixes console=com0 thing, i have to think about a new acpi
+ <gg0> ok managed to workaround apt bug in installer, i can graphically
+ install last weekly
+ <gg0> no console=com0 means no vm shutdown though
+ <pere> gg0: wow. impressed!
+ <gg0> patching CI to make CI workaround bugs CI spots is not so good
+ <gg0> any idea about another shutdown trick without console=com0 till
+ teythoon or youpi fix it?
+ <pere> nope
+ <gg0> current one: vm writes serial console to file and host loops grepping
+ "In tight loop: hit ctl-alt-del to reboot"
+ <gg0> -watchdog might be an alternative
+ <gg0> if there are watchdog agents that can run on hurd
+ <gg0> "watchdog" for instance doesn't build on hurd
+ <pere> it need kernel support
+ * gg0 testing -add-fd
+
+
+## IRC, freenode, #hurd, 2014-03-07
+
+ <gg0> teythoon: just mounted an additional fs, it's mounted but not present
+ in proc/mounts
+ <braunr> gg0: how did you mount it ?
+ <gg0> i was under /root, sid-chroot is the mountpoint. i did mount /dev/hd3
+ sid-chroot (relative path)
+ <braunr> does fsysopts confirm a new translator is running on sid-chroot ?
+ <gg0> i shut down vm, working on another one by mounting the same disk
+ which hosts a debchroot
+ <gg0> i'm trying to reproduce the mtab-dying-on-chroot issue i get with
+ debian installer
+ <gg0> at the end, os-prober gets stuck by reading /target/proc/mounts
+ (target is the installed system)
+ <gg0> to be precise it gets stuck at second access. at first it gives
+ Resource lost
+ <gg0> didn't manage to reproduce so far
+ <gg0> environment is pretty the same: booting with qemu multiboot
+ http://darnassus.sceen.net/~hurd-web/hurd/running/qemu/#QEMU_Multiboot
+ <gg0> so root on initrd + chroot on real disk
+ <gg0> what's weird is that issue vanishes by removing console=com0 from
+ -append options
+
+
+### IRC, freenode, #hurd, 2014-03-08
+
+ <gg0> os-prober doesn't get stuck anymore and grub can install
+ <gg0> my guess is that without console=com0 /target/proc/mounts is just
+ accessed once
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-08
+
+ <gg0> youpi: from #debian-cd http://paste.debian.net/plainh/559f669b
+ <gg0> any quick way to recreate initrd?
+ <teythoon> gg0: i'm working on that
+ <gg0> teythoon: that what?
+ <teythoon> gg0: there is genext2fs, i have some patches that allows one to
+ create nodes with passive translator records
+ <gg0> recreating initrd?
+ <teythoon> yes
+ <teythoon> in the meantime, you can mount the existing initrd and modify it
+ <gg0> well i'm following this one to rebuild whole cd then take an updated
+ initrd to test with your repo
+ <gg0> http://people.debian.org/~sthibault/hurd-i386/installer/README-d-i
+ <gg0> probably too much work to get that
+ <gg0> copying current /hurd to new initrd would be enough?
+ <youpi> just copy the precise translator you need
+ <youpi> also, no need to rebuild the whole cd just to replace the initrd
+ <youpi> simply copy the content of an existing is
+ <youpi> iso
+ <youpi> replace the initrd.gz there
+ <youpi> and then use grub-mkrescue to rebuild the ios
+ <youpi> development would be horrible if you had to rebuild everything from
+ zero everytime
+ <youpi> first thing to do when developping is first take the time to find
+ ways to work efficiently
+ <gg0> i'd want to try multiboot with teythoon's gnumach/hurd but boot gets
+ stuck with old initrd
+ <youpi> unfortunately I had to apply some patches
+ <youpi> first in d-i because isc-dhcp doens't work -> use the debian-ports
+ version
+ <gg0> so i could simply copying whole /hurd dir to new initrd
+ <gg0> -ing
+ <youpi> then in d-i to automatically enable the debian-ports mirror
+ <youpi> and last in the debian-cd to include debian-ports-archive-keyring
+ <youpi> you'd also need to copy the libs
+ <gg0> anything missing here?
+ http://people.debian.org/~sthibault/hurd-i386/installer/README-d-i
+ <gg0> libc0.3 on initrd is still 2.17
+ <gg0> mini.iso doesn't like any mirror
+ <gg0> "mirror does not support the specified release"
+ <gg0> something wrong/missing in my rebuilt
+ <gg0> youpi: anything wrong in http://paste.debian.net/plain/86258 ?
+ <gg0> i have/had problems with name resolution
+ <youpi> gg0: the patch makes sense for -bsd too, Cc them too
+ <gg0> i was wondering how many hunks in your patches are upstreamable
+ <youpi> normally it's zero
+ <gg0>
+ http://people.debian.org/~sthibault/hurd-i386/installer/patch-debootstrap
+ <gg0> why "release" instead on "main" by default? sid is never released
+ <youpi> only because my mirror directory is hacked one
+ <youpi> that merges debian.org, debian-ports.org, and my repo
+ <youpi> and I don't rebuild Release files, just Packages files
+ <gg0> i keep getting gpgv: BAD signature from "Debian Archive Automatic
+ Signing Key (7.0/Wheezy) <ftpmaster@debian.org>
+ <gg0> just before creating debootstrap chroot
+ <gg0> i applied hunk #2 only, installed modified debootstrap and put debs
+ under localdebs/
+ <gg0> trying a different mirror
+ <youpi> I don't know what issue you are encountering
+ <youpi> but again, it's way simpler and faster to just patch existing
+ images, rather than rebuilding them from zero
+ <gg0> ok just read i'd need a local mirror to build isos
+ <gg0> better using netinst and proxy cache
+
+
+## IRC, freenode, #hurd, 2014-03-09
+
+ <gg0> http://postimg.org/image/oca8ormaj/
+ <gg0> with teythoon's repo too ^
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-09
+
+ <gg0> ok i'm out of tests, i get Resource lost with teythoon's gnumach/hurd
+ packages in initrd too
+ <gg0> http://postimg.org/image/oca8ormaj/
+ <gg0> thread storms, dead locks, resource lost
+ <gg0> i find assonance
+
+
+## IRC, freenode, #hurd, 2014-03-09
+
+ <teythoon> gg0: strange
+ <gg0> teythoon: shouldn't there be a patch which shows pid instead of task?
+ <gg0> 20:43 < teythoon> task /hurd/procfs(19) <EF><BF><BD>O<EF><BF><BD>
+ deallocating an invalid port 1049744, most probably a bug.
+ <teythoon> there is
+ <teythoon> i placed the functionality in proc first, but the wiki suggested
+ to put it in the exec server instead
+ <teythoon> i did that, it has the advantage, that the argv vector is easily
+ accessible
+ <teythoon> so i can also include the program name
+ <teythoon> but there are two programs, that are not started using the exec
+ server
+ <teythoon> the root filesystem and the exec server itself
+ <teythoon> so for these two processes, the approach does not work
+ <gg0> i see. so here we got two which could come from
+ ext2fs.static(initrd), exec(initrd) and ext2fs(chroot)
+ http://postimg.org/image/e3qyafd0b/ right?
+ <gg0> i also noticed that once mtab dies, by killing its procfs parent,
+ they both restart, but /target/proc is not in /proc/mounts anymore
+ <youpi> teythoon: for those we could use the first word of the module
+ command line
+ <gg0> restart doesn't means that by accessing /target/proc/mounts again it
+ works btw, it'll give Resource lost again
+ <teythoon> youpi: indeed
+ <teythoon> gg0: no, the ext2fs for /target will be started by the exec
+ server
+ <gg0> ok two invalid ports one from ext2fs.static and one exec then
+ <teythoon> gg0: what makes you attribute one to the exec server ?
+ <teythoon> i'm pretty sure that there is a bug in libfshelp, it's easily
+ triggered by killing an translator like procfs
+ <teythoon> i must have introduced it with the translator list work i've
+ done for the mtab translator
+ <gg0> teythoon: a totally wrong task-is-a-process reasoning probably
+ <gg0> just mounted another procfs which seems to work
+ <gg0> http://postimg.org/image/q6w9xzo2j/
+ http://postimg.org/image/cr998jfkr/
+ <teythoon> gg0: the mtab translators in your screenshots are oldish, what's
+ the point exactly ?
+ <teythoon> gg0: also, all tasks are processes. task is a mach concept,
+ whereas process is a posix concept implemented by hurds proc server. it
+ creates a process object for every mach task.
+ <gg0> my guess was that given we got two messages with different taskid:
+ <gg0> 16:01 < gg0> ok two invalid ports one from ext2fs.static and one exec
+ then
+ <gg0> screenshot is this one http://postimg.org/image/e3qyafd0b/
+ <gg0> btw what do you mean by oldish. except first one 01:18 < gg0>
+ http://postimg.org/image/oca8ormaj/ the only with current debian
+ packages, remaining are done with your latest packages
+ <gg0> in all cases i boot using qemu multiboot
+ <gg0> root@hurd01:~# cat /proc/version
+ <gg0> Linux version 2.6.1 (GNU 0.5 GNU-Mach 1.4-486-dbg/Hurd-0.5
+ i686-AT386)
+ <gg0> it wouldn't be bad customizing version somehow, last commit id for
+ instance
+ <gg0> or build date
+ <gg0> user01@jessie01 ~$ cat /proc/version
+ <gg0> Linux version 3.11-2-686-pae (debian-kernel@lists.debian.org) (gcc
+ version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04)
+ <gg0> user01@jessie01 ~$ uname -v
+ <gg0> #1 SMP Debian 3.11.10-1 (2013-12-04)
diff --git a/open_issues/performance.mdwn b/open_issues/performance.mdwn
index 3dab6d4c..64b245f2 100644
--- a/open_issues/performance.mdwn
+++ b/open_issues/performance.mdwn
@@ -239,3 +239,22 @@ call|/glibc/fork]]'s case.
<braunr> teythoon: pahole is a very handy tool :)
<teythoon> yes
<teythoon> i especially like how general it is
+
+
+# Measurement
+
+## coulomb
+
+### [[!message-id "87wqghouoc.fsf@schwinge.name"]]
+
+## IRC, freenode, #hurd, 2014-02-27
+
+ <braunr> tschwinge: about your concern with regard to performance
+ measurements, you could run kvm with hugetlbfs and cpuset
+ <braunr> on a machine that provides nested page tables, this makes the
+ virtualization overhead as small as it could be considering the
+ implementatoin
+ <braunr> hugetlbs reduces the overhead of page faults, and also implies
+ locked memory while cpuset isolates the vm from global scheduling
+ <braunr> hugetlbfs*
+ <tschwinge> Thanks, will look into that.
diff --git a/open_issues/performance/io_system/read-ahead.mdwn b/open_issues/performance/io_system/read-ahead.mdwn
index 711f7691..59f22187 100644
--- a/open_issues/performance/io_system/read-ahead.mdwn
+++ b/open_issues/performance/io_system/read-ahead.mdwn
@@ -3064,3 +3064,13 @@ License|/fdl]]."]]"""]]
mach-defpager)
<braunr> rebase it, send it as a patch on bug-hurd, it should be
straightforward and short
+
+
+## IRC, freenode, #hurd, 2014-03-04
+
+ <teythoon> btw, has mcsim worked on vectorized i/o ? there was someting you
+ wanted to integrate
+ <teythoon> not sure what
+ <braunr> clustered pageins
+ <braunr> but he seems busy
+ <teythoon> oh, pageins
diff --git a/open_issues/ti-rpc_then_nfs.mdwn b/open_issues/ti-rpc_then_nfs.mdwn
index c3dd4e26..46cc1c1c 100644
--- a/open_issues/ti-rpc_then_nfs.mdwn
+++ b/open_issues/ti-rpc_then_nfs.mdwn
@@ -103,3 +103,30 @@ re-enabled, [[!message-id "87hb2j7ha7.fsf@gnu.org"]].
<pere> failing rpcinfo -p on hurd reported as <URL:
http://bugs.debian.org/739674 >. Anyone got a clue how to debug it?
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-03
+
+ <pere> I was just tipped by sesse that the hurd fix for libtirpc probably
+ caused RC bug in nfs-common, <URL: https://bugs.debian.org/740491 >.
+ Have not had time to check it out more closely.
+
+
+## IRC, OFTC, #debian-hurd, 2014-03-04
+
+ <youpi> pere: I don't really see how debian/patches/05-hurd-port.diff could
+ break Linux' libtirpc
+ <youpi> AIUI, the patch has zero effect on non-hurd builds
+ <youpi> oh wait
+ <youpi> it's simply missing a reautoconf to get HAVE_SYS_USER_H undefined
+ in config.h.in
+ <pere> youpi: I am quite sure I did add the required dh_autoreconf call.
+ did you see a build log where it was missing?
+ <youpi> pere: ah, ok. Then 02-rerun-bootstrap.diff can be dropped
+ <youpi> and I don't have any further idea
+ <youpi> pere: maybe it's the autoreconf itself which broke something?
+ <pere> could be. not quite sure how to find out.
+ <gnu_srs> pere: what about running autoreconf on the previous (working
+ version)?
+ <pere> gnu_srs: sound like a good idea. perhaps a good idea to just
+ disable the two patches as a start.
diff --git a/open_issues/versioning.mdwn b/open_issues/versioning.mdwn
index 1987b6ca..18fb588e 100644
--- a/open_issues/versioning.mdwn
+++ b/open_issues/versioning.mdwn
@@ -66,11 +66,8 @@ In context of [[packaging_libpthread]]/[[libpthread]].
could be the perfect moment to fix the /dev/fd/N problem without adding
new RPCs, though we'd probably have to break backwards-compatibility in
the exec server IIRC...
- <tschwinge> pochu: Oh, I have to re-read that discussion, but thanks for
- reminding!
-[[!GNU_Savannah_bug 28934]], [[user/pochu]], [[!message-id
-"4BFA500A.7030502@gmail.com"]].
+[[glibc#execve_relative_paths]].
### `time_t` -- Unix Epoch vs. 2038
diff --git a/open_issues/virtualization/fakeroot.mdwn b/open_issues/virtualization/fakeroot.mdwn
index 8901e1c3..88a18a93 100644
--- a/open_issues/virtualization/fakeroot.mdwn
+++ b/open_issues/virtualization/fakeroot.mdwn
@@ -24,6 +24,8 @@ License|/fdl]]."]]"""]]
<youpi> it's just a argv[0] issue supposed to be fixed by exec_file_name
but apparently not fixed in that case, for some reason
+[[glibc#execve_relative_paths]].
+
## IRC, freenode, #hurd, 2013-08-26
@@ -36,6 +38,9 @@ License|/fdl]]."]]"""]]
< youpi> yes
< youpi> pinotree's exec_file_name is supposed to fix that, but for some
reason it doesn't work here
+
+[[glibc#execve_relative_paths]].
+
< pinotree> it was pochu's, not mine
< youpi> ah, right
< teythoon> ah I see, I was wondering about that
@@ -73,6 +78,9 @@ License|/fdl]]."]]"""]]
<teythoon> I believe I figured out the argv[0] issue with fakeroot-hurd
<teythoon> but I'm not sure how to fix this
<teythoon> first of all, Emilios file_exec_file_name patch set works fine
+
+[[glibc#execve_relative_paths]].
+
<teythoon> but not with fakeroot
<teythoon>
http://git.sceen.net/hurd/hurd.git/blob/HEAD:/exec/hashexec.c#l300
@@ -1293,3 +1301,26 @@ License|/fdl]]."]]"""]]
<braunr> teythoon: was it a big package ?
<teythoon> half of the hurd package
<braunr> that's not a port right overflow then
+
+
+## IRC, freenode, #hurd, 2014-03-05
+
+ <teythoon> youpi: what about the exec_filename patch series? even though
+ fakeroot still has some issues (has it?), i consider it worthy for
+ inclusion
+
+[[glibc#execve_relative_paths]].
+
+ <youpi> Roland was disagreeing with it
+ <youpi> iirc the fakeroot issue was solved
+ <teythoon> braunr: ^
+ <braunr> fakeroot goot a lot more robust than it used to be
+ <braunr> but i haven't checked that it actually behaves exactly like the
+ library for corner cases
+ <braunr> there are minor differences
+ <braunr> also, it seems to trigger concurrency bugs in ext2fs
+ <braunr> e.g. git reporting that files either "already exist" or "can't be
+ found"
+ <braunr> it happens (rarely) when directly using ext2
+ <braunr> and more often through fakeroot
+ <braunr> i didn't take the time to investigate