diff options
Diffstat (limited to 'hurd')
| -rw-r--r-- | hurd/dde/guide.mdwn | 204 | ||||
| -rw-r--r-- | hurd/dde/guide/discussion.mdwn | 15 |
2 files changed, 147 insertions, 72 deletions
diff --git a/hurd/dde/guide.mdwn b/hurd/dde/guide.mdwn index 56f7683c..31671308 100644 --- a/hurd/dde/guide.mdwn +++ b/hurd/dde/guide.mdwn @@ -1,4 +1,4 @@ -[[!meta copyright="Copyright © 2010 Free Software Foundation, Inc."]] +[[!meta copyright="Copyright © 2010,2011 Free Software Foundation, Inc."]] [[!meta license="""[[!toggle id="license" text="GFDL 1.2+"]][[!toggleable id="license" text="Permission is granted to copy, distribute and/or modify this @@ -8,146 +8,206 @@ Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled [[GNU Free Documentation License|/fdl]]."]]"""]] -If you haven't: install hurd to partition -get grub image -boot hurd in single user (change grub entry accordingly to the installed partition) +This guide explains how to build and set up +a DDE-based network card driver +with Debian GNU/Hurd, +if your (wired) network card +is not supported by the old in-kernel drivers shipped with gnumach. -> $ export TERM=mach +This guide assumes that you have +an installation of Debian GNU/Linux on the same machine, +which helps in fetching the required packages +in absence of working networking in the Hurd. +The whole process is much more cumbersome otherwise. +It also assumes that apart from networking, +your Hurd system is already installed and operational. -> $ ./native-install -reboot to other debian +We start by booting into Debian GNU/Linux, +so we can downloading everything we will need for building DDE. -suppose hurd partition is hdd1 +Once there, first mount the Hurd partition (as root): -as root + $ mount /dev/hdd1 /mnt -t ext2 # assuming your Hurd partition is hdd1 -- replace with whatever matches your setup -> $ mount /dev/hdd1 /mnt -t ext2 +Prepare apt offline configuration so we can get necessary packages: -> $ cd /mnt/etc/apt + $ cd /mnt/etc/apt -> $ echo "deb http://ftp.debian-ports.org/debian unreleased main" >> sources.list + $ echo "deb http://ftp.debian-ports.org/debian unreleased main" >> sources.list # if you don't have sources.list set up yet on the Hurd system -> $ echo "deb-src http://ftp.debian-ports.org/debian unreleased main" >> sources.list + $ echo "deb-src http://ftp.debian-ports.org/debian unreleased main" >> sources.list -> $ echo "deb http://ftp.uk.debian.org/debian unstable main" >> sources.list + $ echo "deb http://ftp.uk.debian.org/debian unstable main" >> sources.list -> $ echo "deb-src http://ftp.uk.debian.org/debian unstable main" >> sources.list + $ echo "deb-src http://ftp.uk.debian.org/debian unstable main" >> sources.list -> $ wget http://www.gnu.org/software/hurd/hurd/running/debian/DebianAptOffline/apt.conf.offline + $ wget http://www.gnu.org/software/hurd/hurd/running/debian/DebianAptOffline/apt.conf.offline -> $ cd /mnt +Download the packages for offline installation: -> $ apt-get -c etc/apt/apt.conf.offline update + $ cd /mnt -> $ apt-get -c etc/apt/apt.conf.offline upgrade + $ apt-get -c etc/apt/apt.conf.offline update -> $ apt-get -c etc/apt/apt.conf.offline install git-core + $ apt-get -c etc/apt/apt.conf.offline build-dep hurd gnumach -> $ apt-get -c etc/apt/apt.conf.offline build-dep hurd gnumach + $ apt-get -c etc/apt/apt.conf.offline install git-core build-essential libpciaccess-dev libpcap0.8-dev -> $ apt-get -c etc/apt/apt.conf.offline install build-essential libpciaccess-dev libpcap0.8-dev +Get DDE code: -> $ cd /mnt/home + $ cd /mnt/home/me # assuming your user name on the Hurd system is "me" -> $ git clone git://git.sv.gnu.org/hurd/incubator.git -b dde hurd_dde + $ mkdir dde && cd dde -> $ git clone git://git.sv.gnu.org/hurd/gnumach.git -b master-user_level_drivers gnumach_dde + $ git clone git://git.sv.gnu.org/hurd/incubator.git -b dde hurd + $ git clone git://git.sv.gnu.org/hurd/gnumach.git -b master-user_level_drivers -suppose you need forcedeth driver +Now comes the tricky part: +you need to find out +whether there is already a driver for your card +in the DDE source tree, +and otherwise get the driver code +from the official Linux source tree. -Download http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.29.y.git;a=blob_plain;f=drivers/net/forcedeth.c;hb=HEAD from mozilla like -browser to /mnt/home as forcedeth.c +For this, you have to find out which Linux driver +is responsible for your network card. +In this guide we will use the forcedeth driver +(for Nvidia nForce chipsets) as example. +We check whether there is already a `dde_forcedeth` directory +in the newly cloned `hurd_dde` tree. +If there isn't, we have to find and download +the right source file from Linux: -reboot back to hurd (multiuser) +Point a (JavaScript-capable) web browser at -> $ apt-get update + http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.29.y.git;a=tree;f=drivers/net;hb=HEAD -> $ apt-get upgrade +(Note: you **have** to use 2.6.29, +as this is the version DDE is currently based on.) -> $ apt-get install git-core +Find the right file to download +(forcedeth.c in this example); +then hit the "raw" link, +and save the resulting file (page) to /mnt/home/me/dde -> $ apt-get build-dep hurd gnumach +(If you happen to need one of the few drivers +that consist of more than one source file, +the process will be more complicated, +and can't be covered in this guide...) -> $ apt-get install build-essential libpciaccess-dev libpcap0.8-dev +Now everything should be in place, +so we can boot into Hurd to do the actual work. -> $ cd /home/gnumach_dde +Once there, install the packages previously downloaded (again as root): -> $ autoreconf -i && ./configure --enable-kdb --enable-device-drivers=none --enable-lpr --enable-floppy --enable-ide + $ apt-get build-dep hurd gnumach -> $ make + $ apt-get install git-core build-essential libpciaccess-dev libpcap0.8-dev -> $ cd ../hurd_dde +Make sure we can build stuff as normal user: -> $ cp -r dde_pcnet32 dde_forcedeth + $ chown -R me ~me/dde -> $ cd dde_forcedeth +Now you can log in with the normal user account to build stuff. -> $ rm pcnet32.c +Build a DDE-enabled Mach: -> $ cp /home/forcedeth.c ./ + $ cd ~me/dde/gnumach -> $ sed -i 's/pcnet32/forcedeth/g' Makefile + $ autoreconf -i && ./configure --enable-kdb --enable-device-drivers=none --enable-lpr --enable-floppy --enable-ide -> $ sed -i 's/pcnet32/forcedeth/g' .gitignore + $ make -> $ sed -i 's:-lhurd-slab:../libhurd-slab/libhurd-slab.a:' Makefile -> $ sed -i 's:-I/include:-I..:' Makefile +If not already present in DDE, +we need to prepare the driver for the network card: -> $ nano forcedeth.c + $ cd ~me/dde/hurd -add this line after the last #include + $ cp -r dde_pcnet32 dde_forcedeth # using pcnet32 as template + + $ cd dde_forcedeth + + $ rm pcnet32.c # don't want the actual pcnet32 code here... + + $ cp ~me/dde/forcedeth.c . # ...but rather the forcedeth code + + $ sed -i 's/pcnet32/forcedeth/g' Makefile # adapt Makefile accordingly + + $ sed -i 's/pcnet32/forcedeth/g' .gitignore + + $ sed -i 's:-lhurd-slab:../libhurd-slab/libhurd-slab.a:' Makefile # fix up build system... XXX I guess this part is obsolete + + $ sed -i 's:-I/include:-I..:' Makefile # same + + $ nano forcedeth.c # Near the top of the file, there will be many #include lines. After the last one, add this: #include <ddekit/timer.h> -> $ cd .. + $ cd .. + +Commit the new driver with git. +This will be helpful if we update the DDE code later; +as well as for creating a patch for later reuse +and/or upstream submission: -> $ git add dde_forcedeth + $ git add dde_forcedeth -> $ git commit -a -m 'Add forcedeth driver' + $ git commit -a -m 'Add forcedeth driver' -> $ autoreconf -i && ./configure -> $ mkdir -p hurd/include/ddekit +Having prepared the driver, +we can now build the necessary Hurd and DDE bits: -> $ make libddekit libmachdev devnode pfinet + $ autoreconf -i && ./configure -> $ cd libdde_linux26 + $ mkdir -p hurd/include/ddekit # workaround for a buildsystem bug... XXX I'm pretty sure this is not necessary anymore -> $ make + $ make libddekit libmachdev devnode pfinet # Hurd components -> $ cd ../dde_forcedeth + $ cd libdde_linux26 # common DDE driver code -- uses a different Makefile system than the Hurd components! -> $ make + $ make -If the make fails it might be necassary to replace some of the -l options (or all) in Makefile with the real path to the library objects (example: change *-lhurd-slab* to *../libhurd-slab/libhurd-slab.a*) + $ cd ../dde_forcedeth # actual driver -> $ cp /home/gnumach_dde/gnumach /boot/gnumach_dde + $ make -> $ mkdir /hurd/dde +Install the various built components to their final destinations (as root): -> $ cp /home/hurd_dde/devnode/devnode /hurd/dde + $ cd ~me/dde/ -> $ cp /home/hurd_dde/pfinet/pfinet /hurd/dde + $ cp gnumach/gnumach /boot/gnumach_dde -> $ cp /home/hurd_dde/dde_forcedeth/dde_forcedeth /hurd/dde/forcedeth + $ mkdir /hurd/dde -reboot to hurd with the new gnumach_dde + $ cp hurd/devnode/devnode hurd/pfinet/pfinet hurd/dde_forcedeth/dde_forcedeth /hurd/dde -> $ settrans -c /dev/forcedeth /hurd/dde/forcedeth -> $ settrans -c /dev/eth0 /hurd/dde/devnode -M /dev/forcedeth eth0 +Now everything should be ready. +Before we can use the driver, +we have to boot with the newly built gnumach_dde +instead of the standard kernel. +(Adapt your grub configuration; +or manually edit the entry +in the boottime grub menu while testing.) -> $ settrans -c /servers/socket/2 /hurd/dde/pfinet -i /dev/eth0 -a 192.168.1.194 -g 192.168.1.254 -m 255.255.255.0 +Once there, set up the translators for the driver (as root): + $ settrans -c /dev/forcedeth /hurd/dde/forcedeth -replace the ip, gateway and mask with your own ones + $ settrans -c /dev/eth0 /hurd/dde/devnode -M /dev/forcedeth eth0 -> $ nano /etc/resolv.conf +Finally, we can set up the actual network translator, +using something like: -add line: nameserver 192.168.1.254 + $ settrans -c /servers/socket/2 /hurd/dde/pfinet -i /dev/eth0 -a 192.168.1.194 -g 192.168.1.254 -m 255.255.255.0 -DONE +For the exact syntax, +see the normal network setup documentation. +The only differences here +are the different location of the pfinet binary, +and the different syntax for the -i option. diff --git a/hurd/dde/guide/discussion.mdwn b/hurd/dde/guide/discussion.mdwn new file mode 100644 index 00000000..b24b69e7 --- /dev/null +++ b/hurd/dde/guide/discussion.mdwn @@ -0,0 +1,15 @@ +[[!meta copyright="Copyright © 2011 Free Software Foundation, Inc."]] + +[[!meta license="""[[!toggle id="license" text="GFDL 1.2+"]][[!toggleable +id="license" text="Permission is granted to copy, distribute and/or modify this +document under the terms of the GNU Free Documentation License, Version 1.2 or +any later version published by the Free Software Foundation; with no Invariant +Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license +is included in the section entitled [[GNU Free Documentation +License|/fdl]]."]]"""]] + +ToDo: + +* This guide is probably out of date in some points: the build system got reworked in the meantime I believe... +* The formatting here needs serious cleanup +* Might be nice to explain how to find out the right Linux driver, and in which source file it resides |