diff options
Diffstat (limited to 'hurd')
| -rw-r--r-- | hurd/dde/guide.mdwn | 56 | ||||
| -rw-r--r-- | hurd/faq/top.mdwn | 16 | ||||
| -rw-r--r-- | hurd/running/qemu.mdwn | 10 | ||||
| -rw-r--r-- | hurd/status.mdwn | 2 | ||||
| -rw-r--r-- | hurd/translator/procfs/jkoenig/discussion.mdwn | 5 |
5 files changed, 49 insertions, 40 deletions
diff --git a/hurd/dde/guide.mdwn b/hurd/dde/guide.mdwn index 6a83519c..bf41dd79 100644 --- a/hurd/dde/guide.mdwn +++ b/hurd/dde/guide.mdwn @@ -22,9 +22,14 @@ The whole process is much more cumbersome otherwise. It also assumes that apart from networking, your Hurd system is already installed and operational. +Debian now already includes dde support in both gnumach (>= +2:1.3.99.dfsg.git20120219-1) and hurd (>= 20120219-1), so in the steps below, +building gnumach will not be needed. Also, be sure to use the dde-debian branch +instead of dde. + We start by booting into Debian GNU/Linux, -so we can download everything we will need for building DDE. +so we can download everything we will need for building DDE. If you have already a way to download things from the Hurd image, skip to "Get DDE code" below. Once there, first mount the Hurd partition (as root): @@ -52,7 +57,7 @@ Download the packages for offline installation: $ apt-get -c etc/apt/apt.conf.offline build-dep hurd gnumach - $ apt-get -c etc/apt/apt.conf.offline install git-core build-essential libpciaccess-dev libpcap0.8-dev + $ apt-get -c etc/apt/apt.conf.offline install git-core build-essential libpciaccess-dev libpcap0.8-dev hurd-dev zlib1g-dev Get DDE code: @@ -60,6 +65,10 @@ Get DDE code: $ mkdir dde && cd dde +Note: here, use dde-debian instead of dde if you have gnumach >= +2:1.3.99.dfsg.git20120219-1 already installed and running. Otherwise you will +get "vm_allocate_contiguous: (ipc/mig) bad request message ID" error messages. + $ git clone git://git.sv.gnu.org/hurd/incubator.git -b dde hurd $ git clone git://git.sv.gnu.org/hurd/gnumach.git -b master-user_level_drivers @@ -82,10 +91,10 @@ the right source file from Linux: Point a (JavaScript-capable) web browser at - http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.29.y.git;a=tree;f=drivers/net;hb=HEAD + http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=tree;f=drivers/net;hb=refs/heads/linux-2.6.29.y -(Note: you **have** to use 2.6.29, -as this is the version DDE is currently based on.) +(Note: you **have** to use some 2.6.29.y (whatever the y, prefer the latest), as +this is the version DDE is currently based on.) Find the right file to download (forcedeth.c in this example); @@ -105,7 +114,7 @@ Once there, install the packages previously downloaded (again as root): $ apt-get build-dep hurd gnumach - $ apt-get install git-core build-essential libpciaccess-dev libpcap0.8-dev + $ apt-get install git-core build-essential libpciaccess-dev libpcap0.8-dev hurd-dev zlib1g-dev Make sure we can build stuff as normal user: @@ -113,7 +122,7 @@ Make sure we can build stuff as normal user: Now you can log in with the normal user account to build stuff. -Build a DDE-enabled Mach: +Build a DDE-enabled Mach. Not needed if you have gnumach >= 2:1.3.99.dfsg.git20120219-1 already installed and running: $ cd ~me/dde/gnumach @@ -123,7 +132,7 @@ Build a DDE-enabled Mach: If not already present in DDE, -we need to prepare the driver for the network card: +we need to prepare the driver for the network card (else, skip to "Having prepared the driver" below): $ cd ~me/dde/hurd @@ -164,27 +173,25 @@ we can now build the necessary Hurd and DDE bits: $ autoreconf -i && ./configure - $ mkdir -p hurd/include/ddekit # workaround for a buildsystem bug... XXX I'm pretty sure this is not necessary anymore + $ make libddekit libmachdev devnode pfinet # Hurd components. This is not needed if you have the Debian hurd-dev >= 20120219-1 package already installed. - $ make libddekit libmachdev devnode pfinet # Hurd components + $ make -C libdde_linux26 # common DDE driver code -- uses a different Makefile system than the Hurd components! This is not needed if you have the Debian hurd-dev >= 20120219-2 package already installed. - $ cd libdde_linux26 # common DDE driver code -- uses a different Makefile system than the Hurd components! +If you have the Debian hurd-dev >= 20120219-2 package already installed (and thus skipped the previous steps), run: - $ make + $ make -C dde_forcedeth PKGDIR=/usr/share/libdde_linux26 # actual driver - $ cd ../dde_forcedeth # actual driver +otherwise, after doing the previous steps, use: - $ make + $ make -C dde_forcedeth # actual driver -Install the various built components to their final destinations (as root): +Install the various built components to their final destinations (as root). You only need to install dde_forcedeth if you are already running the Debian gnumach >= 2:1.3.99.dfsg.git20120219-1 and hurd-dev >= 20120219-1 packages: $ cd ~me/dde/ $ cp gnumach/gnumach /boot/gnumach_dde - $ mkdir /hurd/dde - - $ cp hurd/devnode/devnode hurd/pfinet/pfinet hurd/dde_forcedeth/dde_forcedeth /hurd/dde + $ cp hurd/devnode/devnode hurd/pfinet/pfinet hurd/dde_forcedeth/dde_forcedeth /hurd Now everything should be ready. @@ -197,17 +204,24 @@ in the boottime grub menu while testing.) Once there, set up the translators for the driver (as root): - $ settrans -c /dev/forcedeth /hurd/dde/forcedeth + $ settrans -cap /dev/forcedeth /hurd/dde_forcedeth + +If that spews error "vm_allocate_contiguous: (ipc/mig) bad request message ID", +you are mixing things: either use the debian kernel and the dde-debian incubator +branch, or use your kernel built from the master-user_level_drivers branch and +the dde incubator branch, but don't make any mixture. - $ settrans -c /dev/eth0 /hurd/dde/devnode -M /dev/forcedeth eth0 + $ settrans -cap /dev/eth0 /hurd/devnode -M /dev/forcedeth eth0 Finally, we can set up the actual network translator, using something like: - $ settrans -c /servers/socket/2 /hurd/dde/pfinet -i /dev/eth0 -a 192.168.1.194 -g 192.168.1.254 -m 255.255.255.0 + $ settrans -cap /servers/socket/2 /hurd/pfinet -i /dev/eth0 -a 192.168.1.194 -g 192.168.1.254 -m 255.255.255.0 For the exact syntax, see the normal network setup documentation. The only differences here are the different location of the pfinet binary, and the different syntax for the -i option. + +Check Arch/Hurd recipe on git://projects.archhurd.org/packages.git diff --git a/hurd/faq/top.mdwn b/hurd/faq/top.mdwn deleted file mode 100644 index 9e385c0f..00000000 --- a/hurd/faq/top.mdwn +++ /dev/null @@ -1,16 +0,0 @@ -[[!meta copyright="Copyright © 2009 Free Software Foundation, Inc."]] - -[[!meta license="""[[!toggle id="license" text="GFDL 1.2+"]][[!toggleable -id="license" text="Permission is granted to copy, distribute and/or modify this -document under the terms of the GNU Free Documentation License, Version 1.2 or -any later version published by the Free Software Foundation; with no Invariant -Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license -is included in the section entitled [[GNU Free Documentation -License|/fdl]]."]]"""]] - -[[!meta title="What is a replacement for procps' top?"]] - -Here is a replacement to use, until the real `top` works, which depends on -[[hurd/translator/procfs]] and some [[!taglink porting|open_issue_porting]]. - - $ while :; do ps -e -v -s CPU --top=22 -r; sleep 5; done diff --git a/hurd/running/qemu.mdwn b/hurd/running/qemu.mdwn index b2812750..d7660c74 100644 --- a/hurd/running/qemu.mdwn +++ b/hurd/running/qemu.mdwn @@ -1,5 +1,5 @@ -[[!meta copyright="Copyright © 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free -Software Foundation, Inc."]] +[[!meta copyright="Copyright © 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc."]] [[!meta license="""[[!toggle id="license" text="GFDL 1.2+"]][[!toggleable id="license" text="Permission is granted to copy, distribute and/or modify this @@ -20,6 +20,12 @@ You can use the following images to give the GNU/Hurd a try. [[!inline pages=hurd/running/debian/qemu_image raw=yes feeds=no]] +## NixOS + + * <http://hydra.nixos.org/jobset/gnu/hurd-master> + + * <http://hydra.nixos.org/job/gnu/hurd-master/qemu_test> + ## Unofficial Images Note that the following images are unofficial ones: they have been prepared by diff --git a/hurd/status.mdwn b/hurd/status.mdwn index 447f3ae4..a48c128f 100644 --- a/hurd/status.mdwn +++ b/hurd/status.mdwn @@ -39,7 +39,7 @@ memory or semaphores are still under development. All this applies to the current development version, and not to the last release (0.2). We encourage everybody who is interested to try -out the latest development version, and send feedback to the Hurd +out the current development version, and send feedback to the Hurd developers. diff --git a/hurd/translator/procfs/jkoenig/discussion.mdwn b/hurd/translator/procfs/jkoenig/discussion.mdwn index 135b4a88..339fab50 100644 --- a/hurd/translator/procfs/jkoenig/discussion.mdwn +++ b/hurd/translator/procfs/jkoenig/discussion.mdwn @@ -213,3 +213,8 @@ IRC, freenode, #hurd, 2011-07-25 Needed by glibc's `pldd` tool (commit 11988f8f9656042c3dfd9002ac85dff33173b9bd). + + +# `/proc/self/exe` + +[[!message-id "alpine.LFD.2.02.1110111111260.2016@akari"]] |