diff options
Diffstat (limited to 'hurd')
| -rw-r--r-- | hurd/translator/ext2fs.mdwn | 13 | ||||
| -rw-r--r-- | hurd/translator/ext2fs/large_stores.txt | 510 | ||||
| -rw-r--r-- | hurd/translator/ext2fs/ogi-fosdem2005.mgp | 165 |
3 files changed, 686 insertions, 2 deletions
diff --git a/hurd/translator/ext2fs.mdwn b/hurd/translator/ext2fs.mdwn index 69d035db..305576b8 100644 --- a/hurd/translator/ext2fs.mdwn +++ b/hurd/translator/ext2fs.mdwn @@ -9,14 +9,23 @@ Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled [[GNU Free Documentation License|/fdl]]."]]"""]] -# Issues +# Large Stores The `ext2fs` translator from the upstream Hurd code base can only handle file systems with sizes of less than roughly 2 GiB. [[!tag open_issue_hurd]] -A patch exists to lift this limitation (and is being used in the +## Ognyan's Work + + * Ognyan Kulev, [[*Supporting Large ext2 File Systems in the + Hurd*|ogi-fosdem2005.mgp]], 2005, at FOSDEM + + * Ognyan Kulev, [[large_stores]] + + * <http://kerneltrap.org/node/4429> + +Ognyan's patch lifts this limitation (and is being used in the [[Debian_GNU/Hurd_distribution|running/debian]]), but it introduces another incompatibility: `ext2fs` then only supports block sizes of 4096 bytes. Smaller block sizes are commonly automatically selected by `mke2fs` when using diff --git a/hurd/translator/ext2fs/large_stores.txt b/hurd/translator/ext2fs/large_stores.txt new file mode 100644 index 00000000..e17a02a5 --- /dev/null +++ b/hurd/translator/ext2fs/large_stores.txt @@ -0,0 +1,510 @@ +This is -*- mode: outline -*- + +* Introduction + +Here is a try to describe the ext2fs patch for the Hurd. This patch +allows using partitions/stores larger that approximately 1.5G by not +memory mapping the whole store to address space. + +As a guideline, the changelog of RC1 (Release Candidate 1) is +followed, so I hope nothing is missed. During writing of this text, +some questions arised and they are marked with XXX. An effort will be +made to fix all these for RC2. + + Ognyan Kulev <ogi@fmi.uni-sofia.bg> + +* The block layer and its purpose + +The basic unit of ext2 filesystem is "block". All filesystem +operation work on blocks which are read, and sometimes modified and +written back. Possible block sizes are 1K, 2K and 4K, but current +implementation works reliably only on 4K blocks (= page size of i386). + +So the two basic operations on blocks are "reading" block and +"writing" block. + +* Current implementation + +** Reading + +Currently, the whole store is memory mapped into address space of +ext2fs process. The is called "disk image", although "store image" +would be more accurate. The address of the start of the disk image is +stored in pager.c:disk_image. So "reading" block is easy: just +calculate byte offset of block and add it to disk_image. The resulting +address points to the start of the desired block. + +The macro ext2fs.h:bptr has exactly this purpose: given block number, +it returns pointer to block. Sometimes we have pointer somewhere in +the block, and we want the block number. This is calculated by +ext2fs.h:bptr_block. + +There is another set of macros that use byte offsets instead of block +numbers. These are boffs_ptr (store offset -> memory pointer) and +bptr_offs (memory pointer -> store offset). + +Converting between store offset and block number is easy with macros +boffs (block -> offset) and boffs_block (offset -> block). Other +useful macros are trunc_block and round_block. + +** Writing + +Modifying block and saving it is not that straight-forward as +reading. For writing, you need to use "pokel" ("poked elements"). +Pokel interface is in ext2fs.h. Implementation is in pokel.c. + +The problem is that generally multiple blocks are modified and we want +all these changes to hit disk at relatively same time. So we can't +just change block and leave decision when it's going to be written to +the microkernel. + +So there is a pokel for each set of changes and each change should be +reported to the pokel by calling pokel_add. When this set of changes +is completed, pokel_sync of pokel_flush is called. (The latter is +used to ignore changes.) + +In practice, there is one indir_pokel for each ext2fs.h:disknode, +which is used for indirect blocks of ext2fs. The only other pokel +used is ext2fs.h:global_pokel, where all other changes to metadata are +registered. + +* Proposed implementation + +First one must realize that the idea of mapping the whole store is to +be thrown away. So only parts of the store should be mapped. These +currently mapped parts of store are collectively called "cache". + +In the proposed implementation, the cache has fixed size of +ext2fs.h:DISK_CACHE_BLOCKS. In RC1, it's 100, but this is only to +easily catch bugs. In practice, it can be, for example, 512M, or +(512*1024/4) blocks of 4K. pager.c:disk_cache_size and +pager.c:disk_cache_blocks are additional variables about that +information. + +The cached blocks are mapped in ext2fs.h:disk_cache and span +disk_cache_size bytes (= disk_cache_blocks blocks). As in the +original implementation, this part of address space is handled by +custom pager. + +** Data structures + +Blocks in cache aren't consecutive, so we need data structure to hold +which part of address space represents what block. This is the +purpose of pager.c:disk_cache_info. Index in this array is "cached +block index". But this array doesn't help in finding if specific +block is mapped, and where. This is the purpose of the +pager.c:disk_cache_bptr ihash which finds cached block index from +given block number. Both data structures are guarded by +pager.c:disk_cache_lock. + +** Public interface + +"Public" interface to the cache are functions disk_cache_block_ref, +disk_cache_block_ref_ptr, disk_cache_block_deref, +disk_cache_block_is_ref. disk_cache_block_ref takes block number and +return pointer to block content. Reference count of this cached block +is incremented. After finishing work with block, +disk_cache_block_deref should be called. + +In converting original ext2fs code to use this functions, usually call +to bptr is turned into call to disk_cache_block_ref. In addition, +after pointer to block content is not used anymore, +disk_cache_block_deref is called. This simple scheme is only for +reading from block. For modifying block, see about pokels below. + +disk_cache_block_ref_ptr just increments reference count of specified +block. It's used when we give pointer to block content to somebody +else that will dereference it (e.g. pokel) and we want to continue to +use this content. + +disk_cache_block_is_ref checks if specified block has reference count +greater than zero. It's used in assert:s. + +*** bptr* and boffs* macros + +These macros continue to work as before, but they don't deal with +reference counting and this should be taken into consideration. In +addition, bptr_index returns cached block index from given pointer to +block content. (This function is used internally.) + +*** Pokels + +When pokel_add is called with pointer to block content, this +"consumes" reference of block. It's not consumed (decremented by 1) +immediately, but when pokel_sync or pokel_flush is called. (Reference +is consumed immediately if the block is already in the pokel. The +important thing is that you always lose one reference of the block.) + +So we have the following code when we read from block: + + char *bh = disk_cache_block_ref (block); + ... + disk_cache_block_deref (bh); + +And the following code when we modify block: + + char *bh = disk_cache_block_ref (block); + ... + pokel_add (pokel, bh, block_size); + +**** Indirect calls to pokel_add + +Some functions indirectly call pokel_add, so this should be taken into +consideration. These are: + + * record_global_poke + * record_indir_poke + +So these functions should be treated in the same scheme as pokel_add. +For example: + + char *bh = disk_cache_block_ref (block); + ... + record_indir_poke (node, bh); + +**** Modifying SBLOCK in diskfs_set_hypermetadata + +SBLOCK is global variable that points to superblock content. There is +one reference count for superblock, so before we call +record_global_poke (which consumes reference), +disk_cache_block_ref_ptr is called. + +**** Modifying GDP + +When group descriptor is wanted, usuall group_desc is called and +result is stored in local variable GDP. After modifying GDP, +record_global_poke is called. But because record_global_poke is used, +we need call to disk_cache_block_ref_ptr: + + gdp = group_desc (i); + ... + disk_cache_block_ref_ptr (gdp); + record_global_poke (gdp); + +*** More complex use of pointer to block content + +In ext2_new_block and ext2_alloc_inode functions, we have local +pointer variable BH that sometimes points to block content and +sometimes points to nothing. In order to reduce possible errors, when +BH points to nothing it's always 0. In some points (goto labels), +there is assertion if BH is what's expected (pointer to nothing or +pointer to something). + +*** dino + +dino function return pointer to struct ext2_inode for given ino_t. +This uses reference, so corresponding disk_cache_block_deref should be +called after finishing work with ext2_inode. For convenience, dino is +renamed to dino_ref, and dino_deref just calls disk_cache_block_deref. + + struct ext2_inode *di = dino_ref (np->cache_id); + ... + dino_deref (di); + +Or + + struct ext2_inode *di = dino_ref (np->cache_id); + ... + sync_global_ptr (di, 1); + dino_deref (di); + +Or + + struct ext2_inode *di = dino_ref (np->cache_id); + ... + record_global_poke (di); + +* Internals of the proposed implementation + +As said earlier, instead of mapping the whole store of filesystem to +address space, only part of it is mapped. This part is called "cache" +or "disk cache" (although "store cache" would be more appropriate). +Currently, the cache is contiguous area in address space that starts +at disk_cache. Its size is disk_cache_size which is disk_cache_blocks +number of blocks of size block_size. + +Mapped blocks in disk cache are not fixed -- each block in the cache +can be replaced at any time with another block. So we need to know +which blocks are cached currently and where. Information about each +cached block is stored in disk_cache_info[]. Index is from 0 to +disk_cache_blocks-1. In this information the block number is stored +(among some other things, discussed later). The reverse direction, +getting the index of cached block from block number, is achieved by +using disk_cache_bptr ihash. Both these data structures are guarded +by disk_cache_lock. + +** Requesting a block + +When ext2 code requests block, it calls disk_cache_block_ref. First, +this block is search with disk_cache_bptr. If its there, the +reference count is incremented and pointer to block content is +returned. In this case, there is a call to disk_cache_wait_remapping, +which is explained a bit later. + +It's more interesting when block is not found in disk_cache_bptr. In +this case, disk_cache_map is called. Again, disk_cache_bptr is +consulted, because in the meantime another could already have mapped +this block. If this is the case, the code is essentially the same as +those in disk_cache_block_ref. + +When it's assured that block is not in the cache, we have no choice +but throw away an already mapped/cached block and put our block in its +place. Such block has to meet the following conditions: + +- Its reference count being 0 +- Not in the core +- Not being remapped (explained later) +- Not being forbidden to be remapped ("fixed", explained later) + +The last three conditions are actually flags in disk_cache_info: +DC_INCORE, DC_REMAPPING and DC_FIXED. DC_DONT_REUSE collectively +gives the condition in which block is not suitable for +reusing/remapping. + +Searching suitable place in cache is linear. As an optimisation, this +search doesn't start from the beginning, but starts from where last +time it has ended. This last index is stored in disk_cache_hint. So +new candidate blocks for replacement are searched "circular". + +If suitable place is found, the old mapping is removed, and the new +mapping is initialized. But we are still not ready to return pointer +to block content, because this content is not available yet. We mark +the block as DC_REMAPPING, which makes disk_cache_block_ref for that +block in other threads to wait until page is completely remapped. + +In both cases, when we have found place and when suitable place is not +found, disk_cache_hint is updated so that next disk_cache_map +continues searching from where we ended. + +When not suitable place is found, we have to use force. First all +pages in disk cache are touched. This is workaround because of some +bug in GNU Mach. The patch relies on "precious page" features of +Mach. Marking a page as precious instructs Mach to always inform us +about evicting this page. If page is modified, it seems that we are +always informed. But if page is unmodified and page is evicted, +sometimes Mach forgets to tell us. It's true that with large disk +cache, e.g. 512M, this potentially will re-read the whole cache from +disk. But if we reach this point, the microkernel is telling us that +all is already read :-) + +This is preparation for following calls to pager_return_some. This +libpager function is called only on cached blocks that has reference +count of 0. These are the potential candidates for replacement -- +there is no sense in calling pager_return_some when reference count is +1 or more. One final case is when there is no cached block that has +reference count of 0. This is bad and we can't do anything about it. +In this case, we just wait one second hoping that some other thread +will drop reference count of block to 0. (XXX Currently (in RC1) +sleep(1) is always executed. It should be executed only when disk +cache is starving. There is some rationale behind calling sleep(1) even when +disk cache is not starving. Although pager_return_some(,,,1) +guarantees that upon return of this function the page is returned, I'm +not sure that it's guaranteed that pager_notify_pageout is called. +This is because pager_return_some and +libpager/data-return.c:_pager_do_write_request are executed in +different threads and pager_return_some is confirmed before calling +pager_notify_pageout. This issue is open.) + +So, after forcibly evicting all pages (blocks) that can potentially be +reused, disk_cache_map is called again. + +In the case when suitable place is found and all data structures +(disk_cache_info and disk_cache_bptr) are changed accordingly, +pager_return_some(,,,1) is called and we wait for pager_read_page to +clear DC_REMAPPING. The purpose of this flag (DC_REMAPPING) is solely +this: to forbid any use of this block until we are absolutely sure +that this page contains exactly the wanted block. If NDEBUG is not +defined (so we include debug code), flags of the blocks are checked if +DC_REMAPPING is really cleared. + +Is DC_REMAPPING really needed? Is there possibility that between last +"mutex_unlock (&disk_cache_lock)" and "return bptr" something could go +wrong? Actually, disk cache just follows protocol set by +pager_notify_pageout: that between pager_return_some and changing +internal structures for the remapping no thread may touch the page. +This is achieved by marking the page as DC_REMAPPING. For +convenience, function disk_cache_wait_remapping is defined which waits +for cached block while it's marked as DC_REMAPPING. + +XXX XXX: Actually, the sequence used in RC1 is: remap block and +pager_return_some. The latter seems redundant, as only blocks that +are evicted are candidates for remapping. I'll try to fix that for +RC2. + +** Modifying blocks and pokels + +After block is modified, it should be registered with pokel_add to +some pokel. Pokel contains list of ranges of cached blocks. All this +blocks should have reference count at least 1. In pokel_flush and +pokel_sync, this reference is consumed. + +So in pokel_add if added blocks are already in the pokel, their +references are consumed, because only 1 reference is consumed in +pokel_{sync,flush}. It's checked if pokel is for disk_cache, because +pokels are used in file access too, where disk cache layer is not +used. + +pokel_{flush,sync} both use _pokel_exec, so this is the place where +block references are consumed. (XXX: In RC1, they are consumed +always, but it's better to check if these pages are in disk_cache. +Although calling disk_cache_block_deref on non-disk_cache page does no +harm.) + +*** Indirect use of pokel_add + +record_global_poke and record_indir_poke use indirectly pokel_add. +These functions are slightly changed to use public interface of +disk_cache. Only new precondition is added for them: caller should +supply "reference" that will be consumed later by pokel_{flush,sync}. + +*** Modifying block without using pokels + +sync_global_ptr synchronizes given block immediately. No reference is +consumed. (XXX: This should be changed in RC2 to consuming reference. +This will make the function similar in use to +record_{global,indir}_poke and will make the code more nice-looking.) + +** Initialization + +*** The superblock + +To create disk cache, we need the block size of the filesystem. This +information is in superblock, so we need to read superblock without +using disk cache. For this purpose get_hypermetadata is changed to +read the superblock with store_read instead of old bptr. New function +map_hypermetadata is created that sets sblock global variable to point +to the already mapped superblock. So to get behavior of old +get_hypermetadata, first new get_hypermetadata should be called, and +then map_hypermetadata. + +In ext2fs.c:main, instead of calling get_hypermetadata, +map_hypermetadata is called. The call to get_hypermetadata is in +pager.c:create_disk_pager. + +In ext2fs.c:diskfs_reload_global_state, along with get_hypermetada, +map_hypermetadata is called. + +*** disk_cache + +Disk cache data structures are initialized in +pager.c:create_disk_pager called from ext2fs.c:main. Disk pager is +still initialized with diskfs_start_disk_pager, but due to block_size +variable we call get_hypermetadata. Basic parameters of disk cache +like disk_cache_blocks and disk_cache_size are initialized here. The +rest of the initialization process is delegated to disk_cache_init. + +disk_cache_init initializes the rest of disk cache data structures: +disk_cache_lock, disk_cache_remapping, disk_cache_bptr, +disk_cache_info and disk_cache_hint. After that superblock and group +descriptors are mapped into the cached and are marked as DC_FIXED. +This forbids reusing those blocks, because Hurd's ext2 code relies on +these blocks being mapped into fixed location in address space. + +** Pager callbacks + +disk_pager_read_page and disk_pager_write_page just use disk cache +data structures to get the right pointers to blocks. +disk_pager_read_page requests notification of page-out and updates +DC_INCORE and DC_REMAPPING too. DC_INCORE is set and DC_REMAPPING is +cleared (because reading the new block finishes its remapping). + +disk_pager_notify_pageout just clears DC_INCORE, making that page +available for remapping. + +* libpager changes + +Here memory_object_data_ prefix is shorten to m_o_d_. And when it's +talked about m_o_d_function Mach function, usually its libpager +handler is meant. + +** Notification on eviction + +The most important change that is wanted from libpager is supporting +notification when page is evicted. Mach already has partial support +for notification on eviction by argument "kcopy" of m_o_d_return. If +kcopy is 0, then Mach doesn't have copy of this page anymore, so the +page is "evicted". The problem is that m_o_d_return is usually called +only when page is modified, and if it's not modified, it's silently +dropped. + +The solutions is marking page as "precious". This has the exact +semantics we need: when page is evicted, m_o_d_return callback is +always called with kcopy=0. + +*** Implementation details + +New argument is added to user callback pager_read_page: +notify_on_pageout. If it's non-zero and the page is evicted, user +callback pager_notify_pageout(pager,page) is called. This change ABI +requires all libpager clients in the Hurd to be changed according to +the new API. + +m_o_d_request stores notify_on_pageout as flag PM_NOTIFY_PAGEOUT. + +m_o_d_return no longer just skips non-dirty pages. Local array +notified[] is build and at the end of the function, +pager_notify_pageout is called for all pages that are evicted +(kcopy=0). + +** Avoiding libpager optimization + +Unfortunately, there is one more problem, this time specific to +libpager, not Mach. There is an optimization in m_o_d_request when +page is being paged out. In the beginning of m_o_d_return, all pages +being return are marked as PM_PAGINGOUT. This mark is cleared after +m_o_d_supply (which supplies page content to Mach) is called. If +m_o_d_request is called on page that is marked as PM_PAGINGOUT, this +page is marked with PM_PAGEINWAIT, and m_o_d_supply inside +m_o_d_return is not called for this page. This is possible because +neither of these functions hold pager->interlock during the whole +execution of function. This lock is temporarily unlocked during call +to user callbacks pager_read_page and pager_write_page. + +So what is the implication of this optimization to our page eviction +notification? When page is paged out, we get notified and we can +decide to reuse it. After arranging disk_cache_info, etc, page is +touched, but if this happens fast enough, the optimization is +triggered and we get the old content! Reading the page is "optimized" +and pager_read_page is not called, but instead the content of old +block is used. + +This is solved by marking flushed and synced pages (via +pager_{flush,sync}{,_some} with PM_FORCEREAD. (These functions call +lock-object.c:_pager_lock_object which marks pages with PM_FORCEREAD +if they are already marked with PM_NOTIFY_PAGEOUT.) In handling +m_o_d_request, pages marked as PM_FORCEREAD are not optimized in this +way. XXX: Currently, this fine-grained logic is disabled (with #if), +as it needs more testing. Probably RC2 will use it. For now, all +pages are considered PM_FORCEREAD and this particular optimization +never happens. + +*** Technical details + +As said above, we need guarantee that after pager_{sync,flush}*, +pager_read_page callback is called. The most convenient place to mark +these pages as being forced to re-read is +lock-object.c:_pager_lock_object, because this function is used by all +pager_{sync,flush}* functions. So there we just mark page as +PM_FORCEREAD if it's already marked as PM_NOTIFY_PAGEOUT. + +First, this mark influences behaviour of m_o_d_request. If page is +marked with PM_FORCEREAD and PM_PAGINGOUT, then we set PM_PAGEINWAIT +and wait until related m_o_d_return finishes (unmarks PM_PAGEINWAIT). +Then we continue with pager_read_page, etc. If page is not marked +with PM_FORCEREAD and is marked with PM_PAGINGOUT, then old logic is +used and pager_read_page is not called (because m_o_d_return handler +will call m_o_d_supply instead of us). (XXX: Again, this logic is +inside #if 0. Currently, all pages are considered as marked with +PM_FORCEREAD.) + +The other place where PM_FORCEREAD is taken into consideration is +handler of m_o_d_return. The original code checks if page is marked +with PM_PAGEINWAIT, and if it is, m_o_d_supply is called for the just +written page. PM_PAGEINWAIT is used as "delegator" of the +m_o_d_supply call to Mach. + +In patched libpager, there is one more condition for when to call +m_o_d_supply. It's called when page is marked as PM_PAGEINWAIT and +not marked as PM_FORCEREAD. If it's marked as PM_FORCEREAD, then we +leave m_o_d_supply to m_o_d_request handler which gets notified by +condition pager->wakeup. diff --git a/hurd/translator/ext2fs/ogi-fosdem2005.mgp b/hurd/translator/ext2fs/ogi-fosdem2005.mgp new file mode 100644 index 00000000..27b5077c --- /dev/null +++ b/hurd/translator/ext2fs/ogi-fosdem2005.mgp @@ -0,0 +1,165 @@ +# "Supporting Larger ext2 File Systems in the Hurd" +# Written by Ognyan Kulev for presentation at FOSDEM 2005. +# Content of this file is in public domain. +%include "default.mgp" +%page +%nodefault +%center, font "thick", size 5 + + + + +Supporting Larger ext2 File Systems in the Hurd + + + +%font "standard", size 4 +Ognyan Kulev +%size 3 +<ogi@fmi.uni-sofia.bg> + + +%size 4 +FOSDEM 2005 + +%page + +Need for supporting larger file systems + + Active development during 1995-1997 + + Hurd 0.2 was released in 1997 and it was very buggy + + Many bugs are fixed since then + + The 2G limit for ext2 file systems becomes more and more annoying + +%page + +Timeline + + 2002: Time for graduating, fixing the 2G limit in Hurd's ext2fs and implementing ext3fs were chosen for MSc thesis + + 2003: First alfa quality patch + + 2004: Graduation, ext2fs patch in Debian, but ext3fs is unstable + +%page + +User pager in GNU Mach + + Address space + memory_object_data_supply + memory_object_data_return + Memory object (Mach concept) + pager_read_page + pager_write_page + User-supplied backstore (libpager concept) + +%page + +Current ext2fs + + Memory mapping of the whole store + + Applies only for metadata! + + bptr (block -> data pointer) + = image pointer + block * block_size + + Inode and group descriptor tables are used as if they are continous in memory + +%page + +Patched ext2fs, part one + + Address space region + mapping + Array of buffers + association + Store + + Association of buffers changes (reassocation) + + It's important reassociation to occur on buffers that are not in core + +%page + +Patched ext2fs, part two + + Always use buffer guarded by + disk_cache_block_ref (block -> buffer) + disk_cache_block_deref (release buffer) + + Buffer = data + reference count + flags (e.g. INCORE) + + Calling some functions implies releasing buffer: + pokel_add (pokels are list of dirty buffers) + record_global_poke (use pokel_add) + sync_global_ptr (sync immediately) + record_indir_poke (use pokel_add) + + Use ihash for mapping block to buffer + +%page + +When unassociated block is requested + + +%font "typewriter", size 4, cont +retry: + i = hint; + while (buffers[i] is referenced or in core) { + i = (i + 1) % nbuffers; + if (i == hint) { + return_unreferenced_buffers (); + goto retry; + } + } + hint = i + 1; + + deassociate (buffers[i]); + associate (buffers[i], block); + + return buffers[i]; + +%page + +Notification for evicted pages + + Notification is essential for optimal reassociation + + Precious pages in Mach + + Slight change to API and ABI of libpager is required + + Mach sometimes doesn't notify! + +%page + +Pager optimization + +1. Mach returns page to pager without leaving it in core + +2. Pager becomes unlocked because of calling callback pager_write_page + +3. User task touches the page + +4. Mach requests the same page from pager + +5. XXX Pager supplies the page that was returned by Mach, instead of calling callback pager_read_page + +%page + +Future directions + + Committing in the Hurd :-) + Block sizes of 1K and 2K + Run-time option for buffer array size (?) + Compile-time option for memory-mapping the whole store + Upgrade of UFS + Extended attributes (EAs) and Access control lists (ACLs) + +# Local Variables: +# mgp-options: "-g 640x480" +# End: |