diff options
Diffstat (limited to 'hurd/translator/pfinet/ipv6.mdwn')
| -rw-r--r-- | hurd/translator/pfinet/ipv6.mdwn | 57 |
1 files changed, 0 insertions, 57 deletions
diff --git a/hurd/translator/pfinet/ipv6.mdwn b/hurd/translator/pfinet/ipv6.mdwn deleted file mode 100644 index 5afee0c6..00000000 --- a/hurd/translator/pfinet/ipv6.mdwn +++ /dev/null @@ -1,57 +0,0 @@ -[[!meta copyright="Copyright © 2007, 2008, 2010 Free Software Foundation, -Inc."]] - -[[!meta license="""[[!toggle id="license" text="GFDL 1.2+"]][[!toggleable -id="license" text="Permission is granted to copy, distribute and/or modify this -document under the terms of the GNU Free Documentation License, Version 1.2 or -any later version published by the Free Software Foundation; with no Invariant -Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license -is included in the section entitled -[[GNU Free Documentation License|/fdl]]."]]"""]] - -[[Stefan_Siegl|stesie]] has added IPv6 support to the pfinet [[translator]]. -This was [Savannah task #5470](http://savannah.gnu.org/task/?5470). - - -# Implementation - -Because the IPv4 and IPv6 protocols are -quite related to each other (think of mapped IPv4 addresses, etc.), there is no -separate [[server|translator]] for IPv6 but support for the latter has been -incorporated into the common pfinet. Unfortunately it's a little bit clumsy -now to set the [[translator]] up, since it has to be bound to -*/servers/socket/2* (like before) as well as */servers/socket/26* (for IPv6). - -To achieve this, you can tell pfinet to install [[active_translators|active]] -on specified nodes, using **-4** and **-6** options. This is, you have to -install a [[passive_translator|passive]] on */servers/socket/2* that also binds -the IPv6 port and vice versa. - - -# Examples - -Normal IPv4 network setup, address 192.168.7.23/24 and gateway 192.168.7.1. -IPv6 address shall be assigned using IPv6 auto-configuration. - - settrans -fgp /servers/socket/2 ↩ - /hurd/pfinet -6 /servers/socket/26 ↩ - -i eth0 -a 192.168.7.23 -m 255.255.255.0 -g 192.168.7.1 - settrans -fgp /servers/socket/26 ↩ - /hurd/pfinet -4 /servers/socket/2 ↩ - -i eth0 -a 192.168.7.23 -m 255.255.255.0 -g 192.168.7.1 - -Quite the same, but with static IPv6 address assignment: - - settrans -fgp /servers/socket/2 ↩ - /hurd/pfinet -6 /servers/socket/26 ↩ - -i eth0 -a 192.168.7.23 -m 255.255.255.0 -g 192.168.7.1 ↩ - -A 2001:4b88:10e4:0:216:3eff:feff:4223/64 -G 2001:4b88:10e4::1 - settrans -fgp /servers/socket/26 ↩ - /hurd/pfinet -4 /servers/socket/2 ↩ - -i eth0 -a 192.168.7.23 -m 255.255.255.0 -g 192.168.7.1 ↩ - -A 2001:4b88:10e4:0:216:3eff:feff:4223/64 -G 2001:4b88:10e4::1 - - -# Missing Functionality - -Amongst other things, support for [[IOCTL]]s is missing. |