diff options
Diffstat (limited to 'binutils-gdb/laplace.SCHWINGE/test')
4 files changed, 143 insertions, 161 deletions
diff --git a/binutils-gdb/laplace.SCHWINGE/test/binutils/binutils.sum b/binutils-gdb/laplace.SCHWINGE/test/binutils/binutils.sum index a1608d60..8ed4c2b1 100644 --- a/binutils-gdb/laplace.SCHWINGE/test/binutils/binutils.sum +++ b/binutils-gdb/laplace.SCHWINGE/test/binutils/binutils.sum @@ -1,4 +1,4 @@ -Test Run By thomas on Sat Jul 26 20:13:22 2014 +Test Run By thomas on Thu Sep 11 17:06:17 2014 Native configuration is i686-unknown-gnu0.5 === binutils tests === diff --git a/binutils-gdb/laplace.SCHWINGE/test/gas/testsuite/gas.sum b/binutils-gdb/laplace.SCHWINGE/test/gas/testsuite/gas.sum index 9c5dd6bb..2319a72f 100644 --- a/binutils-gdb/laplace.SCHWINGE/test/gas/testsuite/gas.sum +++ b/binutils-gdb/laplace.SCHWINGE/test/gas/testsuite/gas.sum @@ -1,4 +1,4 @@ -Test Run By thomas on Sat Jul 26 20:13:35 2014 +Test Run By thomas on Thu Sep 11 17:06:32 2014 Native configuration is i686-unknown-gnu0.5 === gas tests === diff --git a/binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum b/binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum index 0301a0f2..606990e7 100644 --- a/binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum +++ b/binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum @@ -1,4 +1,4 @@ -Test Run By thomas on Sat Jul 26 20:22:57 2014 +Test Run By thomas on Thu Sep 11 17:16:06 2014 Native configuration is i686-unknown-gnu0.5 === gdb tests === @@ -742,7 +742,7 @@ FAIL: gdb.arch/i386-dr3-watch.exp: set watchpoint occuping one debug register PASS: gdb.arch/i386-dr3-watch.exp: watchpoint on gap1 does not fit debug registers (gdb figured out itself the watchpoint does not fit) Running ../../../W._C._Handy/gdb/testsuite/gdb.arch/i386-float.exp ... PASS: gdb.arch/i386-float.exp: first stepi -FAIL: gdb.arch/i386-float.exp: info float +PASS: gdb.arch/i386-float.exp: info float PASS: gdb.arch/i386-float.exp: second stepi PASS: gdb.arch/i386-float.exp: info float Running ../../../W._C._Handy/gdb/testsuite/gdb.arch/i386-gnu-cfi.exp ... @@ -3612,12 +3612,6 @@ PASS: gdb.base/display.exp: undisp PASS: gdb.base/display.exp: info disp PASS: gdb.base/display.exp: next hit PASS: gdb.base/display.exp: undisp all -PASS: gdb.base/display.exp: disp *p_i -PASS: gdb.base/display.exp: p p_i = 0x0 -PASS: gdb.base/display.exp: display bad address -PASS: gdb.base/display.exp: p p_i = &i -PASS: gdb.base/display.exp: display good address -PASS: gdb.base/display.exp: undisp all again PASS: gdb.base/display.exp: disab 3 PASS: gdb.base/display.exp: watch off PASS: gdb.base/display.exp: finish @@ -4467,30 +4461,30 @@ PASS: gdb.base/fileio.exp: Lseeking SET a file PASS: gdb.base/fileio.exp: Closing a file PASS: gdb.base/fileio.exp: Closing an invalid file descriptor returns EBADF PASS: gdb.base/fileio.exp: Stat a file -FAIL: gdb.base/fileio.exp: Stat a NULL pathname returns ENOENT or EFAULT -FAIL: gdb.base/fileio.exp: Stat an empty pathname returns ENOENT -FAIL: gdb.base/fileio.exp: Stat a nonexistant file returns ENOENT (the program is no longer running) -FAIL: gdb.base/fileio.exp: Fstat an open file (the program is no longer running) -FAIL: gdb.base/fileio.exp: Fstat an invalid file descriptor returns EBADF (the program is no longer running) -FAIL: gdb.base/fileio.exp: Isatty (stdin) (the program is no longer running) -FAIL: gdb.base/fileio.exp: Isatty (stdout) (the program is no longer running) -FAIL: gdb.base/fileio.exp: Isatty (stderr) (the program is no longer running) -FAIL: gdb.base/fileio.exp: Isatty (invalid fd) (the program is no longer running) -FAIL: gdb.base/fileio.exp: Isatty (open file) (the program is no longer running) -FAIL: gdb.base/fileio.exp: System says shell is available (the program is no longer running) +PASS: gdb.base/fileio.exp: Stat a NULL pathname returns ENOENT or EFAULT +PASS: gdb.base/fileio.exp: Stat an empty pathname returns ENOENT +PASS: gdb.base/fileio.exp: Stat a nonexistant file returns ENOENT +PASS: gdb.base/fileio.exp: Fstat an open file +PASS: gdb.base/fileio.exp: Fstat an invalid file descriptor returns EBADF +PASS: gdb.base/fileio.exp: Isatty (stdin) +PASS: gdb.base/fileio.exp: Isatty (stdout) +PASS: gdb.base/fileio.exp: Isatty (stderr) +PASS: gdb.base/fileio.exp: Isatty (invalid fd) +PASS: gdb.base/fileio.exp: Isatty (open file) +PASS: gdb.base/fileio.exp: System says shell is available PASS: gdb.base/fileio.exp: set remote system-call-allowed 1 -FAIL: gdb.base/fileio.exp: System(3) call (the program is no longer running) -FAIL: gdb.base/fileio.exp: System with invalid command returns 127 (the program is no longer running) -FAIL: gdb.base/fileio.exp: Rename a file (the program is no longer running) -FAIL: gdb.base/fileio.exp: Renaming a file to existing directory returns EISDIR (the program is no longer running) -FAIL: gdb.base/fileio.exp: Renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST (the program is no longer running) -FAIL: gdb.base/fileio.exp: Renaming a directory to a subdir of itself returns EINVAL (the program is no longer running) -FAIL: gdb.base/fileio.exp: Renaming a nonexistant file returns ENOENT (the program is no longer running) -FAIL: gdb.base/fileio.exp: Unlink a file (the program is no longer running) -FAIL: gdb.base/fileio.exp: Unlinking a file in a directory w/o write access returns EACCES (the program is no longer running) -FAIL: gdb.base/fileio.exp: Unlinking a nonexistant file returns ENOENT (the program is no longer running) -FAIL: gdb.base/fileio.exp: Time(2) call returns the same value as in parameter (the program is no longer running) -FAIL: gdb.base/fileio.exp: Time(2) returns feasible values (the program is no longer running) +PASS: gdb.base/fileio.exp: System(3) call +PASS: gdb.base/fileio.exp: System with invalid command returns 127 +PASS: gdb.base/fileio.exp: Rename a file +PASS: gdb.base/fileio.exp: Renaming a file to existing directory returns EISDIR +PASS: gdb.base/fileio.exp: Renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST +PASS: gdb.base/fileio.exp: Renaming a directory to a subdir of itself returns EINVAL +PASS: gdb.base/fileio.exp: Renaming a nonexistant file returns ENOENT +PASS: gdb.base/fileio.exp: Unlink a file +PASS: gdb.base/fileio.exp: Unlinking a file in a directory w/o write access returns EACCES +PASS: gdb.base/fileio.exp: Unlinking a nonexistant file returns ENOENT +PASS: gdb.base/fileio.exp: Time(2) call returns the same value as in parameter +PASS: gdb.base/fileio.exp: Time(2) returns feasible values Running ../../../W._C._Handy/gdb/testsuite/gdb.base/filesym.exp ... PASS: gdb.base/filesym.exp: complete on "filesy" PASS: gdb.base/filesym.exp: completion list for "filesym" @@ -8113,70 +8107,7 @@ FAIL: gdb.base/sigaltstack.exp: finish to OUTER (timeout) FAIL: gdb.base/sigaltstack.exp: finish to catch MAIN (timeout) FAIL: gdb.base/sigaltstack.exp: finish to MAIN (timeout) Running ../../../W._C._Handy/gdb/testsuite/gdb.base/sigbpt.exp ... -PASS: gdb.base/sigbpt.exp: break keeper -PASS: gdb.base/sigbpt.exp: display/i $pc -PASS: gdb.base/sigbpt.exp: advance to the bowler -PASS: gdb.base/sigbpt.exp: stepping to fault -PASS: gdb.base/sigbpt.exp: get insn after fault -PASS: gdb.base/sigbpt.exp: Verify that SIGSEGV occurs at the last STEPI insn -PASS: gdb.base/sigbpt.exp: rerun to main -PASS: gdb.base/sigbpt.exp: stepi; pass SIGSEGV -PASS: gdb.base/sigbpt.exp: stepi; continue to keeper -PASS: gdb.base/sigbpt.exp: stepi; nopass SIGSEGV -FAIL: gdb.base/sigbpt.exp: stepi; stepi out of handler -PASS: gdb.base/sigbpt.exp: rerun to main -PASS: gdb.base/sigbpt.exp: stepi bp before segv; pass SIGSEGV -PASS: gdb.base/sigbpt.exp: stepi bp before segv; continue to keeper -PASS: gdb.base/sigbpt.exp: stepi bp before segv; nopass SIGSEGV -PASS: gdb.base/sigbpt.exp: stepi bp before segv; set breakpoint 0 of 1 -FAIL: gdb.base/sigbpt.exp: stepi bp before segv; stepi out of handler -PASS: gdb.base/sigbpt.exp: stepi bp before segv; clear breakpoint 0 of 1 -PASS: gdb.base/sigbpt.exp: rerun to main -PASS: gdb.base/sigbpt.exp: stepi bp at segv; pass SIGSEGV -PASS: gdb.base/sigbpt.exp: stepi bp at segv; continue to keeper -PASS: gdb.base/sigbpt.exp: stepi bp at segv; nopass SIGSEGV -PASS: gdb.base/sigbpt.exp: stepi bp at segv; set breakpoint 0 of 1 -FAIL: gdb.base/sigbpt.exp: stepi bp at segv; stepi out of handler -PASS: gdb.base/sigbpt.exp: stepi bp at segv; clear breakpoint 0 of 1 -PASS: gdb.base/sigbpt.exp: rerun to main -PASS: gdb.base/sigbpt.exp: stepi bp before and at segv; pass SIGSEGV -PASS: gdb.base/sigbpt.exp: stepi bp before and at segv; continue to keeper -PASS: gdb.base/sigbpt.exp: stepi bp before and at segv; nopass SIGSEGV -PASS: gdb.base/sigbpt.exp: stepi bp before and at segv; set breakpoint 0 of 2 -PASS: gdb.base/sigbpt.exp: stepi bp before and at segv; set breakpoint 1 of 2 -FAIL: gdb.base/sigbpt.exp: stepi bp before and at segv; stepi out of handler -PASS: gdb.base/sigbpt.exp: stepi bp before and at segv; clear breakpoint 0 of 2 -PASS: gdb.base/sigbpt.exp: stepi bp before and at segv; clear breakpoint 1 of 2 -PASS: gdb.base/sigbpt.exp: rerun to main -PASS: gdb.base/sigbpt.exp: cont; pass SIGSEGV -PASS: gdb.base/sigbpt.exp: cont; continue to keeper -PASS: gdb.base/sigbpt.exp: cont; nopass SIGSEGV -PASS: gdb.base/sigbpt.exp: cont; set breakpoint 0 of 1 -PASS: gdb.base/sigbpt.exp: cont; continue to breakpoint at fault -PASS: gdb.base/sigbpt.exp: cont; stepi fault -PASS: gdb.base/sigbpt.exp: cont; clear breakpoint 0 of 1 -PASS: gdb.base/sigbpt.exp: rerun to main -PASS: gdb.base/sigbpt.exp: cont bp after segv; pass SIGSEGV -PASS: gdb.base/sigbpt.exp: cont bp after segv; continue to keeper -PASS: gdb.base/sigbpt.exp: cont bp after segv; nopass SIGSEGV -PASS: gdb.base/sigbpt.exp: cont bp after segv; set breakpoint 0 of 2 -PASS: gdb.base/sigbpt.exp: cont bp after segv; set breakpoint 1 of 2 -PASS: gdb.base/sigbpt.exp: cont bp after segv; continue to breakpoint at fault -PASS: gdb.base/sigbpt.exp: cont bp after segv; stepi fault -PASS: gdb.base/sigbpt.exp: cont bp after segv; clear breakpoint 0 of 2 -PASS: gdb.base/sigbpt.exp: cont bp after segv; clear breakpoint 1 of 2 -PASS: gdb.base/sigbpt.exp: rerun to main -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; pass SIGSEGV -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; continue to keeper -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; nopass SIGSEGV -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; set breakpoint 0 of 3 -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; set breakpoint 1 of 3 -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; set breakpoint 2 of 3 -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; continue to breakpoint at fault -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; stepi fault -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; clear breakpoint 0 of 3 -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; clear breakpoint 1 of 3 -PASS: gdb.base/sigbpt.exp: cont bp before and after segv; clear breakpoint 2 of 3 +UNTESTED: gdb.base/sigbpt.exp: Memory at address 0 is possibly executable Running ../../../W._C._Handy/gdb/testsuite/gdb.base/sigchld.exp ... PASS: gdb.base/sigchld.exp: set breakpoint at success exit PASS: gdb.base/sigchld.exp: set breakpoint at failure exit @@ -8232,37 +8163,9 @@ FAIL: gdb.base/signals.exp: signal without arguments disallowed (the program is FAIL: gdb.base/signals.exp: signal SIGUSR1 (the program is no longer running) FAIL: gdb.base/signals.exp: backtrace for SIGUSR1 Running ../../../W._C._Handy/gdb/testsuite/gdb.base/signest.exp ... -PASS: gdb.base/signest.exp: continue to fault -PASS: gdb.base/signest.exp: set conditional breakpoint -PASS: gdb.base/signest.exp: pass SIGSEGV -PASS: gdb.base/signest.exp: pass SIGBUS -PASS: gdb.base/signest.exp: run through nested faults +UNTESTED: gdb.base/signest.exp: Memory at address 0 is possibly executable Running ../../../W._C._Handy/gdb/testsuite/gdb.base/signull.exp ... -PASS: gdb.base/signull.exp: set for function pointer probe -PASS: gdb.base/signull.exp: probe function pointer (function entry-point) -PASS: gdb.base/signull.exp: rerun to main -PASS: gdb.base/signull.exp: break bowler -PASS: gdb.base/signull.exp: break keeper -PASS: gdb.base/signull.exp: handle SIGSEGV -PASS: gdb.base/signull.exp: handle SIGBUS -PASS: gdb.base/signull.exp: data read; start with the bowler -PASS: gdb.base/signull.exp: data read; select the pointer type -PASS: gdb.base/signull.exp: data read; take the SIGSEGV -PASS: gdb.base/signull.exp: data read; backtrace from SIGSEGV -PASS: gdb.base/signull.exp: data read; continue to the keeper -FAIL: gdb.base/signull.exp: data read; backtrace from keeper through SIGSEGV -PASS: gdb.base/signull.exp: data write; start with the bowler -PASS: gdb.base/signull.exp: data write; select the pointer type -PASS: gdb.base/signull.exp: data write; take the SIGSEGV -PASS: gdb.base/signull.exp: data write; backtrace from SIGSEGV -PASS: gdb.base/signull.exp: data write; continue to the keeper -FAIL: gdb.base/signull.exp: data write; backtrace from keeper through SIGSEGV -PASS: gdb.base/signull.exp: code; start with the bowler -PASS: gdb.base/signull.exp: code; select the pointer type -PASS: gdb.base/signull.exp: code; take the SIGSEGV -PASS: gdb.base/signull.exp: code; backtrace from SIGSEGV -PASS: gdb.base/signull.exp: code; continue to the keeper -FAIL: gdb.base/signull.exp: code; backtrace from keeper through SIGSEGV +UNTESTED: gdb.base/signull.exp: Memory at address 0 is possibly executable Running ../../../W._C._Handy/gdb/testsuite/gdb.base/sigrepeat.exp ... PASS: gdb.base/sigrepeat.exp: advance to infinite loop FAIL: gdb.base/sigrepeat.exp: next @@ -8606,12 +8509,62 @@ PASS: gdb.base/stale-infcall.exp: bt PASS: gdb.base/stale-infcall.exp: maintenance print dummy-frames PASS: gdb.base/stale-infcall.exp: maintenance info breakpoints Running ../../../W._C._Handy/gdb/testsuite/gdb.base/stap-probe.exp ... -gdb compile failed, ../../../W._C._Handy/gdb/testsuite/gdb.base/stap-probe.c:39:21: fatal error: sys/sdt.h: No such file or directory - #include <sys/sdt.h> - ^ -compilation terminated. -UNTESTED: gdb.base/stap-probe.exp: without semaphore, not optimized: stap-probe.exp -UNTESTED: gdb.base/stap-probe.exp: without semaphore, not optimized: stap-probe.exp +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: check argument not at probe point +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: info probes stap +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: run to -pstap test:user +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: print $_probe_argc for probe user +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: check $_probe_arg0 for probe user +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: check $_probe_arg1 for probe user +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: set multi-location probe breakpoint (probe two) +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: run to -pstap test:m4 +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: print $_probe_argc for probe m4 +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: check $_probe_arg0 for probe m4 +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: check $_probe_arg1 for probe m4 +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: check $_probe_arg2 for probe m4 +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: run to -pstap test:m4 +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: print $_probe_argc for probe ps +PASS: gdb.base/stap-probe.exp: without semaphore, not optimized: print $_probe_arg1 for probe ps +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: check argument not at probe point +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: info probes stap +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: run to -pstap test:user +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: print $_probe_argc for probe user +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: check $_probe_arg0 for probe user +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: check $_probe_arg1 for probe user +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: set multi-location probe breakpoint (probe two) +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: run to -pstap test:m4 +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: print $_probe_argc for probe m4 +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: check $_probe_arg0 for probe m4 +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: check $_probe_arg1 for probe m4 +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: check $_probe_arg2 for probe m4 +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: run to -pstap test:m4 +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: print $_probe_argc for probe ps +PASS: gdb.base/stap-probe.exp: with semaphore, not optimized: print $_probe_arg1 for probe ps +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: run to -pstap test:user +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: print $_probe_argc for probe user +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: check $_probe_arg0 for probe user +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: check $_probe_arg1 for probe user +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two) +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: run to -pstap test:m4 +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: print $_probe_argc for probe m4 +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: check $_probe_arg0 for probe m4 +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: check $_probe_arg1 for probe m4 +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: check $_probe_arg2 for probe m4 +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: run to -pstap test:m4 +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: print $_probe_argc for probe ps +PASS: gdb.base/stap-probe.exp: without semaphore, optimized: print $_probe_arg1 for probe ps +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: run to -pstap test:user +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: print $_probe_argc for probe user +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: check $_probe_arg0 for probe user +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: check $_probe_arg1 for probe user +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two) +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: run to -pstap test:m4 +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: print $_probe_argc for probe m4 +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: check $_probe_arg0 for probe m4 +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: check $_probe_arg1 for probe m4 +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: check $_probe_arg2 for probe m4 +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: run to -pstap test:m4 +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: print $_probe_argc for probe ps +PASS: gdb.base/stap-probe.exp: with semaphore, optimized: print $_probe_arg1 for probe ps Running ../../../W._C._Handy/gdb/testsuite/gdb.base/start.exp ... PASS: gdb.base/start.exp: start Running ../../../W._C._Handy/gdb/testsuite/gdb.base/step-break.exp ... @@ -9963,7 +9916,7 @@ PASS: gdb.base/watchpoint.exp: reenable watchpoint `$pc' PASS: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled PASS: gdb.base/watchpoint.exp: delete watchpoint `$pc' PASS: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here -PASS: gdb.base/watchpoint.exp: watch -location nullptr->p->x +FAIL: gdb.base/watchpoint.exp: watch -location nullptr->p->x PASS: gdb.base/watchpoint.exp: watch -location .x PASS: gdb.base/watchpoint.exp: continue with watch -location PASS: gdb.base/watchpoint.exp: delete watch -location @@ -10097,7 +10050,7 @@ PASS: gdb.base/watchpoint.exp: no-hw: reenable watchpoint `$pc' PASS: gdb.base/watchpoint.exp: no-hw: watchpoint `$pc' is enabled PASS: gdb.base/watchpoint.exp: no-hw: delete watchpoint `$pc' PASS: gdb.base/watchpoint.exp: no-hw: continue to breakpoint: func5 breakpoint here -PASS: gdb.base/watchpoint.exp: no-hw: watch -location nullptr->p->x +FAIL: gdb.base/watchpoint.exp: no-hw: watch -location nullptr->p->x PASS: gdb.base/watchpoint.exp: no-hw: watch -location .x PASS: gdb.base/watchpoint.exp: no-hw: continue with watch -location PASS: gdb.base/watchpoint.exp: no-hw: delete watch -location @@ -12245,7 +12198,47 @@ PASS: gdb.cp/exception.exp: backtrace after second catch PASS: gdb.cp/exception.exp: continue to catcher for the second time PASS: gdb.cp/exception.exp: continue to rethrow Running ../../../W._C._Handy/gdb/testsuite/gdb.cp/exceptprint.exp ... -UNTESTED: gdb.cp/exceptprint.exp: could not find libstdc++ stap probe +PASS: gdb.cp/exceptprint.exp: catch catch +PASS: gdb.cp/exceptprint.exp: catch throw +PASS: gdb.cp/exceptprint.exp: catch rethrow +PASS: gdb.cp/exceptprint.exp: string: continue to throw +PASS: gdb.cp/exceptprint.exp: string: print exception value at throw +PASS: gdb.cp/exceptprint.exp: string: continue to catch +PASS: gdb.cp/exceptprint.exp: string: print exception value at catch +PASS: gdb.cp/exceptprint.exp: string: continue to rethrow +PASS: gdb.cp/exceptprint.exp: string: print exception value at rethrow +PASS: gdb.cp/exceptprint.exp: string: continue to final catch +PASS: gdb.cp/exceptprint.exp: int: continue to throw +PASS: gdb.cp/exceptprint.exp: int: print exception value at throw +PASS: gdb.cp/exceptprint.exp: int: continue to catch +PASS: gdb.cp/exceptprint.exp: int: print exception value at catch +PASS: gdb.cp/exceptprint.exp: int: continue to rethrow +PASS: gdb.cp/exceptprint.exp: int: print exception value at rethrow +PASS: gdb.cp/exceptprint.exp: int: continue to final catch +PASS: gdb.cp/exceptprint.exp: struct: continue to throw +PASS: gdb.cp/exceptprint.exp: struct: print exception value at throw +PASS: gdb.cp/exceptprint.exp: struct: continue to catch +PASS: gdb.cp/exceptprint.exp: struct: print exception value at catch +PASS: gdb.cp/exceptprint.exp: struct: continue to rethrow +PASS: gdb.cp/exceptprint.exp: struct: print exception value at rethrow +PASS: gdb.cp/exceptprint.exp: struct: continue to final catch +PASS: gdb.cp/exceptprint.exp: reference to struct: continue to throw +PASS: gdb.cp/exceptprint.exp: reference to struct: print exception value at throw +PASS: gdb.cp/exceptprint.exp: reference to struct: continue to catch +PASS: gdb.cp/exceptprint.exp: reference to struct: print exception value at catch +PASS: gdb.cp/exceptprint.exp: reference to struct: continue to rethrow +PASS: gdb.cp/exceptprint.exp: reference to struct: print exception value at rethrow +PASS: gdb.cp/exceptprint.exp: reference to struct: continue to final catch +PASS: gdb.cp/exceptprint.exp: catch catch +PASS: gdb.cp/exceptprint.exp: catch throw +PASS: gdb.cp/exceptprint.exp: catch rethrow +PASS: gdb.cp/exceptprint.exp: int: continue to throw +PASS: gdb.cp/exceptprint.exp: int: print exception value at throw +PASS: gdb.cp/exceptprint.exp: int: continue to catch +PASS: gdb.cp/exceptprint.exp: int: print exception value at catch +PASS: gdb.cp/exceptprint.exp: int: continue to rethrow +PASS: gdb.cp/exceptprint.exp: int: print exception value at rethrow +PASS: gdb.cp/exceptprint.exp: int: continue to final catch Running ../../../W._C._Handy/gdb/testsuite/gdb.cp/expand-psymtabs-cxx.exp ... PASS: gdb.cp/expand-psymtabs-cxx.exp: set language c++ PASS: gdb.cp/expand-psymtabs-cxx.exp: before expand @@ -16250,7 +16243,7 @@ PASS: gdb.guile/scm-disasm.exp: basic: test key address PASS: gdb.guile/scm-disasm.exp: basic: test key asm PASS: gdb.guile/scm-disasm.exp: basic: test key length PASS: gdb.guile/scm-disasm.exp: basic: verify correct address -PASS: gdb.guile/scm-disasm.exp: test bad memory access +FAIL: gdb.guile/scm-disasm.exp: test bad memory access PASS: gdb.guile/scm-disasm.exp: open memory port PASS: gdb.guile/scm-disasm.exp: memory-port: disassemble PASS: gdb.guile/scm-disasm.exp: memory-port: test number of instructions @@ -16580,7 +16573,7 @@ PASS: gdb.guile/scm-pretty-print.exp: print ss PASS: gdb.guile/scm-pretty-print.exp: print ssa[1] PASS: gdb.guile/scm-pretty-print.exp: print ssa PASS: gdb.guile/scm-pretty-print.exp: print arraystruct -PASS: gdb.guile/scm-pretty-print.exp: print ns2 +FAIL: gdb.guile/scm-pretty-print.exp: print ns2 PASS: gdb.guile/scm-pretty-print.exp: print x PASS: gdb.guile/scm-pretty-print.exp: print cstring PASS: gdb.guile/scm-pretty-print.exp: print estring @@ -16618,7 +16611,7 @@ PASS: gdb.guile/scm-pretty-print.exp: print ns PASS: gdb.guile/scm-pretty-print.exp: PASS: gdb.guile/scm-pretty-print.exp: print ns PASS: gdb.guile/scm-pretty-print.exp: -PASS: gdb.guile/scm-pretty-print.exp: print ns2 +FAIL: gdb.guile/scm-pretty-print.exp: print ns2 PASS: gdb.guile/scm-pretty-print.exp: print x PASS: gdb.guile/scm-pretty-print.exp: print cstring PASS: gdb.guile/scm-pretty-print.exp: print estring @@ -16953,11 +16946,8 @@ PASS: gdb.guile/scm-value.exp: verify dereferenced value PASS: gdb.guile/scm-value.exp: Test value-optimized-out? PASS: gdb.guile/scm-value.exp: Test address attribute PASS: gdb.guile/scm-value.exp: Test address attribute in non-addressable value -PASS: gdb.guile/scm-value.exp: parse_and_eval with memory error -PASS: gdb.guile/scm-value.exp: gu (define inval (parse-and-eval "*(int*)0")) -PASS: gdb.guile/scm-value.exp: gu (print (value-lazy? inval)) -PASS: gdb.guile/scm-value.exp: memory error and lazy values -PASS: gdb.guile/scm-value.exp: memory error and lazy values +UNTESTED: gdb.guile/scm-value.exp: parse_and_eval with memory error +UNTESTED: gdb.guile/scm-value.exp: memory error and lazy values PASS: gdb.guile/scm-value.exp: gu (define argc-lazy (parse-and-eval "argc")) PASS: gdb.guile/scm-value.exp: gu (define argc-notlazy (parse-and-eval "argc")) PASS: gdb.guile/scm-value.exp: gu (value-fetch-lazy! argc-notlazy) @@ -19486,7 +19476,7 @@ PASS: gdb.python/py-arch.exp: test number of instructions 4 PASS: gdb.python/py-arch.exp: test key addr PASS: gdb.python/py-arch.exp: test key asm PASS: gdb.python/py-arch.exp: test key length -PASS: gdb.python/py-arch.exp: test bad memory access +FAIL: gdb.python/py-arch.exp: test bad memory access Running ../../../W._C._Handy/gdb/testsuite/gdb.python/py-block.exp ... PASS: gdb.python/py-block.exp: continue to breakpoint: Block break here. PASS: gdb.python/py-block.exp: Check block not None @@ -20361,7 +20351,7 @@ PASS: gdb.python/py-prettyprint.exp: print ss PASS: gdb.python/py-prettyprint.exp: print ssa[1] PASS: gdb.python/py-prettyprint.exp: print ssa PASS: gdb.python/py-prettyprint.exp: print arraystruct -PASS: gdb.python/py-prettyprint.exp: print ns2 +FAIL: gdb.python/py-prettyprint.exp: print ns2 PASS: gdb.python/py-prettyprint.exp: print x PASS: gdb.python/py-prettyprint.exp: print cstring PASS: gdb.python/py-prettyprint.exp: print estring @@ -20396,7 +20386,7 @@ PASS: gdb.python/py-prettyprint.exp: print ns PASS: gdb.python/py-prettyprint.exp: PASS: gdb.python/py-prettyprint.exp: print ns PASS: gdb.python/py-prettyprint.exp: -PASS: gdb.python/py-prettyprint.exp: print ns2 +FAIL: gdb.python/py-prettyprint.exp: print ns2 PASS: gdb.python/py-prettyprint.exp: print x PASS: gdb.python/py-prettyprint.exp: print cstring PASS: gdb.python/py-prettyprint.exp: print estring @@ -20880,11 +20870,8 @@ PASS: gdb.python/py-value.exp: dereference value PASS: gdb.python/py-value.exp: verify dereferenced value PASS: gdb.python/py-value.exp: Test is_optimized_out attribute PASS: gdb.python/py-value.exp: Test address attribute -PASS: gdb.python/py-value.exp: parse_and_eval with memory error -PASS: gdb.python/py-value.exp: python inval = gdb.parse_and_eval('*(int*)0') -PASS: gdb.python/py-value.exp: python print (inval.is_lazy) -PASS: gdb.python/py-value.exp: memory error and lazy values -PASS: gdb.python/py-value.exp: memory error and lazy values +UNTESTED: gdb.python/py-value.exp: parse_and_eval with memory error +UNTESTED: gdb.python/py-value.exp: memory error and lazy values PASS: gdb.python/py-value.exp: python argc_lazy = gdb.parse_and_eval('argc') PASS: gdb.python/py-value.exp: python argc_notlazy = gdb.parse_and_eval('argc') PASS: gdb.python/py-value.exp: python argc_notlazy.fetch_lazy() @@ -22082,11 +22069,6 @@ PASS: gdb.trace/save-trace.exp: 10.3: verify recovered tracepoints, full path PASS: gdb.trace/save-trace.exp: 10: show default-collect PASS: gdb.trace/save-trace.exp: 10.7: help save-tracepoints Running ../../../W._C._Handy/gdb/testsuite/gdb.trace/stap-trace.exp ... -gdb compile failed, ../../../W._C._Handy/gdb/testsuite/gdb.trace/stap-trace.c:34:21: fatal error: sys/sdt.h: No such file or directory - #include <sys/sdt.h> - ^ -compilation terminated. -UNTESTED: gdb.trace/stap-trace.exp: Could not compile stap-trace.c Running ../../../W._C._Handy/gdb/testsuite/gdb.trace/status-stop.exp ... UNSUPPORTED: gdb.trace/status-stop.exp: target does not support trace Running ../../../W._C._Handy/gdb/testsuite/gdb.trace/strace.exp ... @@ -22227,14 +22209,14 @@ PASS: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/loop.xml === gdb Summary === -# of expected passes 20174 -# of unexpected failures 651 +# of expected passes 20184 +# of unexpected failures 628 # of unexpected successes 2 # of expected failures 34 # of unknown successes 1 # of known failures 55 # of unresolved testcases 3 -# of untested testcases 46 +# of untested testcases 49 # of unsupported tests 85 [...]/tschwinge/W._C._Handy.build/gdb/testsuite/../../gdb/gdb version 7.7.50.20140214-cvs -nw -nx -data-directory [...]/tschwinge/W._C._Handy.build/gdb/testsuite/../data-directory diff --git a/binutils-gdb/laplace.SCHWINGE/test/ld/ld.sum b/binutils-gdb/laplace.SCHWINGE/test/ld/ld.sum index 7b4e1d55..8e47d09f 100644 --- a/binutils-gdb/laplace.SCHWINGE/test/ld/ld.sum +++ b/binutils-gdb/laplace.SCHWINGE/test/ld/ld.sum @@ -1,4 +1,4 @@ -Test Run By thomas on Sat Jul 26 20:18:53 2014 +Test Run By thomas on Thu Sep 11 17:11:40 2014 Native configuration is i686-unknown-gnu0.5 === ld tests === |