diff options
Diffstat (limited to 'binutils-gdb/laplace.SCHWINGE/test/gdb')
| -rw-r--r-- | binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum | 958 |
1 files changed, 78 insertions, 880 deletions
diff --git a/binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum b/binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum index ff66a15f..d4c5cf3f 100644 --- a/binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum +++ b/binutils-gdb/laplace.SCHWINGE/test/gdb/testsuite/gdb.sum @@ -1,5 +1,5 @@ -Test Run By thomas on Sun Apr 19 15:03:28 2015 -Native configuration is i686-unknown-gnu0.5 +Test Run By thomas on Mon May 11 10:08:33 2015 +Native configuration is i686-unknown-gnu0.6 === gdb tests === @@ -2687,51 +2687,51 @@ Running ../../../W._C._Handy/gdb/testsuite/gdb.base/catch-load.exp ... PASS: gdb.base/catch-load.exp: plain load: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: plain load: set stop-on-solib-events 0 PASS: gdb.base/catch-load.exp: plain load: catch load -FAIL: gdb.base/catch-load.exp: plain load: continue +PASS: gdb.base/catch-load.exp: plain load: continue PASS: gdb.base/catch-load.exp: plain load with stop-on-solib-events: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: plain load with stop-on-solib-events: set stop-on-solib-events 1 PASS: gdb.base/catch-load.exp: plain load with stop-on-solib-events: catch load -FAIL: gdb.base/catch-load.exp: plain load with stop-on-solib-events: continue +PASS: gdb.base/catch-load.exp: plain load with stop-on-solib-events: continue PASS: gdb.base/catch-load.exp: rx load: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: rx load: set stop-on-solib-events 0 PASS: gdb.base/catch-load.exp: rx load: catch load catch-load-so -FAIL: gdb.base/catch-load.exp: rx load: continue +PASS: gdb.base/catch-load.exp: rx load: continue PASS: gdb.base/catch-load.exp: rx load with stop-on-solib-events: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: rx load with stop-on-solib-events: set stop-on-solib-events 1 PASS: gdb.base/catch-load.exp: rx load with stop-on-solib-events: catch load catch-load-so -FAIL: gdb.base/catch-load.exp: rx load with stop-on-solib-events: continue +PASS: gdb.base/catch-load.exp: rx load with stop-on-solib-events: continue PASS: gdb.base/catch-load.exp: non-matching load: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: non-matching load: set stop-on-solib-events 0 PASS: gdb.base/catch-load.exp: non-matching load: catch load zardoz -FAIL: gdb.base/catch-load.exp: non-matching load: continue +PASS: gdb.base/catch-load.exp: non-matching load: continue PASS: gdb.base/catch-load.exp: non-matching load with stop-on-solib-events: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: non-matching load with stop-on-solib-events: set stop-on-solib-events 1 PASS: gdb.base/catch-load.exp: non-matching load with stop-on-solib-events: catch load zardoz -FAIL: gdb.base/catch-load.exp: non-matching load with stop-on-solib-events: continue +PASS: gdb.base/catch-load.exp: non-matching load with stop-on-solib-events: continue PASS: gdb.base/catch-load.exp: plain unload: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: plain unload: set stop-on-solib-events 0 PASS: gdb.base/catch-load.exp: plain unload: catch unload -FAIL: gdb.base/catch-load.exp: plain unload: continue +PASS: gdb.base/catch-load.exp: plain unload: continue PASS: gdb.base/catch-load.exp: plain unload with stop-on-solib-events: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: plain unload with stop-on-solib-events: set stop-on-solib-events 1 PASS: gdb.base/catch-load.exp: plain unload with stop-on-solib-events: catch unload -FAIL: gdb.base/catch-load.exp: plain unload with stop-on-solib-events: continue +PASS: gdb.base/catch-load.exp: plain unload with stop-on-solib-events: continue PASS: gdb.base/catch-load.exp: rx unload: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: rx unload: set stop-on-solib-events 0 PASS: gdb.base/catch-load.exp: rx unload: catch unload catch-load-so -FAIL: gdb.base/catch-load.exp: rx unload: continue +PASS: gdb.base/catch-load.exp: rx unload: continue PASS: gdb.base/catch-load.exp: rx unload with stop-on-solib-events: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: rx unload with stop-on-solib-events: set stop-on-solib-events 1 PASS: gdb.base/catch-load.exp: rx unload with stop-on-solib-events: catch unload catch-load-so -FAIL: gdb.base/catch-load.exp: rx unload with stop-on-solib-events: continue +PASS: gdb.base/catch-load.exp: rx unload with stop-on-solib-events: continue PASS: gdb.base/catch-load.exp: non-matching unload: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: non-matching unload: set stop-on-solib-events 0 PASS: gdb.base/catch-load.exp: non-matching unload: catch unload zardoz -FAIL: gdb.base/catch-load.exp: non-matching unload: continue +PASS: gdb.base/catch-load.exp: non-matching unload: continue PASS: gdb.base/catch-load.exp: non-matching unload with stop-on-solib-events: set var libname = "catch-load-so.so" PASS: gdb.base/catch-load.exp: non-matching unload with stop-on-solib-events: set stop-on-solib-events 1 PASS: gdb.base/catch-load.exp: non-matching unload with stop-on-solib-events: catch unload zardoz -FAIL: gdb.base/catch-load.exp: non-matching unload with stop-on-solib-events: continue +PASS: gdb.base/catch-load.exp: non-matching unload with stop-on-solib-events: continue Running ../../../W._C._Handy/gdb/testsuite/gdb.base/catch-signal-fork.exp ... PASS: gdb.base/catch-signal-fork.exp: catch signal SIGHUP PASS: gdb.base/catch-signal-fork.exp: continue to breakpoint: first HUP @@ -4524,6 +4524,7 @@ PASS: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: dprintf insertion FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: detach program FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior Running ../../../W._C._Handy/gdb/testsuite/gdb.base/dprintf-next.exp ... +WARNING: program timed out. PASS: gdb.base/dprintf-next.exp: dprintf 24, "%d\n", x PASS: gdb.base/dprintf-next.exp: next 1 PASS: gdb.base/dprintf-next.exp: next 2 @@ -6109,31 +6110,25 @@ PASS: gdb.base/jit-simple.exp: blah 1 Running ../../../W._C._Handy/gdb/testsuite/gdb.base/jit-so.exp ... PASS: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here before-dlopen PASS: gdb.base/jit-so.exp: one_jit_test-1: set var jit_libname = "jit-main.so" -FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here after-dlopen (the program exited) -FAIL: gdb.base/jit-so.exp: one_jit_test-1: setting breakpoint at jit-main.c:130 -FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 0 (the program is no longer running) -FAIL: gdb.base/jit-so.exp: one_jit_test-1: set var argc = 2 -FAIL: gdb.base/jit-so.exp: one_jit_test-1: set var libname = "SHLIBDIR/jit-solib.so" -FAIL: gdb.base/jit-so.exp: one_jit_test-1: set var count = 1 -FAIL: gdb.base/jit-so.exp: one_jit_test-1: setting breakpoint at jit-main.c:193 -FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 1 (the program is no longer running) -FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function -FAIL: gdb.base/jit-so.exp: one_jit_test-1: setting breakpoint at jit-main.c:218 -FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program is no longer running) +PASS: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here after-dlopen +PASS: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 0 +PASS: gdb.base/jit-so.exp: one_jit_test-1: set var argc = 2 +PASS: gdb.base/jit-so.exp: one_jit_test-1: set var libname = "SHLIBDIR/jit-solib.so" +PASS: gdb.base/jit-so.exp: one_jit_test-1: set var count = 1 +PASS: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 1 +PASS: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function +PASS: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2 PASS: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function PASS: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here before-dlopen PASS: gdb.base/jit-so.exp: one_jit_test-2: set var jit_libname = "jit-main.so" -FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here after-dlopen (the program exited) -FAIL: gdb.base/jit-so.exp: one_jit_test-2: setting breakpoint at jit-main.c:130 -FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 0 (the program is no longer running) -FAIL: gdb.base/jit-so.exp: one_jit_test-2: set var argc = 2 -FAIL: gdb.base/jit-so.exp: one_jit_test-2: set var libname = "SHLIBDIR/jit-solib.so" -FAIL: gdb.base/jit-so.exp: one_jit_test-2: set var count = 2 -FAIL: gdb.base/jit-so.exp: one_jit_test-2: setting breakpoint at jit-main.c:193 -FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 1 (the program is no longer running) -FAIL: gdb.base/jit-so.exp: one_jit_test-2: info function jit_function -FAIL: gdb.base/jit-so.exp: one_jit_test-2: setting breakpoint at jit-main.c:218 -FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program is no longer running) +PASS: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here after-dlopen +PASS: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 0 +PASS: gdb.base/jit-so.exp: one_jit_test-2: set var argc = 2 +PASS: gdb.base/jit-so.exp: one_jit_test-2: set var libname = "SHLIBDIR/jit-solib.so" +PASS: gdb.base/jit-so.exp: one_jit_test-2: set var count = 2 +PASS: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 1 +PASS: gdb.base/jit-so.exp: one_jit_test-2: info function jit_function +PASS: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2 PASS: gdb.base/jit-so.exp: one_jit_test-2: info function jit_function Running ../../../W._C._Handy/gdb/testsuite/gdb.base/jit.exp ... PASS: gdb.base/jit.exp: one_jit_test-1: continue to breakpoint: break here 0 @@ -9210,6 +9205,7 @@ FAIL: gdb.base/sigaltstack.exp: finish to OUTER (timeout) FAIL: gdb.base/sigaltstack.exp: finish to catch MAIN (timeout) FAIL: gdb.base/sigaltstack.exp: finish to MAIN (timeout) Running ../../../W._C._Handy/gdb/testsuite/gdb.base/sigbpt.exp ... +WARNING: program timed out. PASS: gdb.base/sigbpt.exp: break keeper PASS: gdb.base/sigbpt.exp: display/i $pc PASS: gdb.base/sigbpt.exp: advance to the bowler @@ -9295,39 +9291,9 @@ FAIL: gdb.base/siginfo.exp: continue to stepi handler (timeout) FAIL: gdb.base/siginfo.exp: backtrace for nexti (pattern 1) (timeout) FAIL: gdb.base/siginfo.exp: step out of handler (timeout) Running ../../../W._C._Handy/gdb/testsuite/gdb.base/signals.exp ... -PASS: gdb.base/signals.exp: handle all print -PASS: gdb.base/signals.exp: set variable count = 0 -PASS: gdb.base/signals.exp: break handler if 0 -PASS: gdb.base/signals.exp: set $handler_breakpoint_number = $bpnum -PASS: gdb.base/signals.exp: next to signal -PASS: gdb.base/signals.exp: next to alarm #1 -PASS: gdb.base/signals.exp: next to ++count #1 -PASS: gdb.base/signals.exp: p func1 () #1 -FAIL: gdb.base/signals.exp: p count #1 -PASS: gdb.base/signals.exp: condition $handler_breakpoint_number -PASS: gdb.base/signals.exp: next to alarm #2 -PASS: gdb.base/signals.exp: next to ++count #2 -FAIL: gdb.base/signals.exp: p func1 () #2 -FAIL: gdb.base/signals.exp: backtrace from handler when calling func1 -FAIL: gdb.base/signals.exp: continue (the program exited) -FAIL: gdb.base/signals.exp: p count #2 -PASS: gdb.base/signals.exp: info signals -PASS: gdb.base/signals.exp: info signal SIGTRAP -PASS: gdb.base/signals.exp: info signal 5 -PASS: gdb.base/signals.exp: handle without arguments -PASS: gdb.base/signals.exp: handle with bogus SIG -PASS: gdb.base/signals.exp: handle SIG with bogus action -PASS: gdb.base/signals.exp: handle SIG with multiple conflicting actions -PASS: gdb.base/signals.exp: handle SIG parses all legal actions -PASS: gdb.base/signals.exp: handle multiple SIGs -PASS: gdb.base/signals.exp: override SIGTRAP -PASS: gdb.base/signals.exp: invalid signal number rejected -PASS: gdb.base/signals.exp: handle multiple SIGs via integer range -PASS: gdb.base/signals.exp: handle multiple SIGs via reverse integer range -PASS: gdb.base/signals.exp: override SIGINT -FAIL: gdb.base/signals.exp: signal without arguments disallowed (the program is no longer running) -FAIL: gdb.base/signals.exp: signal SIGUSR1 (the program is no longer running) -FAIL: gdb.base/signals.exp: backtrace for SIGUSR1 +WARNING: program timed out. +gdb compile failed, exit status is 1 +UNTESTED: gdb.base/signals.exp: signals.exp Running ../../../W._C._Handy/gdb/testsuite/gdb.base/signest.exp ... PASS: gdb.base/signest.exp: continue to fault PASS: gdb.base/signest.exp: set conditional breakpoint @@ -9363,775 +9329,7 @@ FAIL: gdb.base/signull.exp: code; backtrace from keeper through SIGSEGV Running ../../../W._C._Handy/gdb/testsuite/gdb.base/sigrepeat.exp ... UNTESTED: gdb.base/sigrepeat.exp: aborted; in the following, GDB will get stuck Running ../../../W._C._Handy/gdb/testsuite/gdb.base/sigstep.exp ... -PASS: gdb.base/sigstep.exp: validate backtrace: display/i $pc -PASS: gdb.base/sigstep.exp: validate backtrace: break handler -PASS: gdb.base/sigstep.exp: validate backtrace: continue to stepi handler -FAIL: gdb.base/sigstep.exp: validate backtrace: backtrace for nexti (pattern 2) -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step from handler: continue to signal -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step from handler: stepi to handler -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step from handler: leave handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, step from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, step from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, step from handler: continue to signal -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, step from handler: stepi to handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, step from handler: si in handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, step from handler: advance in handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, step from handler: leave handler -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, next from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, next from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, next from handler: continue to signal -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, next from handler: stepi to handler -FAIL: gdb.base/sigstep.exp: stepi to handler, nothing in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, next from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, next from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, next from handler: continue to signal -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, next from handler: stepi to handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, next from handler: si in handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, next from handler: advance in handler -FAIL: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, continue from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, continue from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, continue from handler: continue to signal -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, continue from handler: stepi to handler -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: continue to signal -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: stepi to handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: si in handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: advance in handler -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: stepi to handler, si+advance in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, step from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, step from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, step from handler: continue to signal -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, step from handler: nexti to handler -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, step from handler: leave handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, step from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, step from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, step from handler: continue to signal -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, step from handler: nexti to handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, step from handler: si in handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, step from handler: advance in handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, step from handler: leave handler -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, next from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, next from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, next from handler: continue to signal -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, next from handler: nexti to handler -FAIL: gdb.base/sigstep.exp: nexti to handler, nothing in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, next from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, next from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, next from handler: continue to signal -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, next from handler: nexti to handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, next from handler: si in handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, next from handler: advance in handler -FAIL: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, continue from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, continue from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, continue from handler: continue to signal -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, continue from handler: nexti to handler -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: nexti to handler, nothing in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: continue to signal -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: nexti to handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: si in handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: advance in handler -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: nexti to handler, si+advance in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, step from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, step from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, step from handler: continue to signal -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, step from handler: step to handler -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, step from handler: leave handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, step from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, step from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, step from handler: continue to signal -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, step from handler: step to handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, step from handler: si in handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, step from handler: advance in handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, step from handler: leave handler -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, next from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, next from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, next from handler: continue to signal -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, next from handler: step to handler -FAIL: gdb.base/sigstep.exp: step to handler, nothing in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, next from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, next from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, next from handler: continue to signal -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, next from handler: step to handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, next from handler: si in handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, next from handler: advance in handler -FAIL: gdb.base/sigstep.exp: step to handler, si+advance in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, continue from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, continue from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, continue from handler: continue to signal -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, continue from handler: step to handler -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: step to handler, nothing in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: continue to signal -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: step to handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: si in handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: advance in handler -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: step to handler, si+advance in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, step from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, step from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, step from handler: continue to signal -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, step from handler: next to handler -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, step from handler: leave handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, step from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, step from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, step from handler: continue to signal -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, step from handler: next to handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, step from handler: si in handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, step from handler: advance in handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, step from handler: leave handler -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, next from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, next from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, next from handler: continue to signal -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, next from handler: next to handler -FAIL: gdb.base/sigstep.exp: next to handler, nothing in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, next from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, next from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, next from handler: continue to signal -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, next from handler: next to handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, next from handler: si in handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, next from handler: advance in handler -FAIL: gdb.base/sigstep.exp: next to handler, si+advance in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, continue from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, continue from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, continue from handler: continue to signal -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, continue from handler: next to handler -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: next to handler, nothing in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: handle SIGALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: handle SIGVTALRM print pass stop -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: continue to signal -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: next to handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: si in handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: advance in handler -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: next to handler, si+advance in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, step from handler: break handler -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, step from handler: continue to handler -FAIL: gdb.base/sigstep.exp: continue to handler, nothing in handler, step from handler: leave handler (timeout) -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: display/i $pc -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: break handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: continue to handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: si in handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: advance in handler -FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler (timeout) -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, next from handler: break handler -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, next from handler: continue to handler -FAIL: gdb.base/sigstep.exp: continue to handler, nothing in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: display/i $pc -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: break handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: continue to handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: si in handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: advance in handler -FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: leave handler -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, continue from handler: break handler -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, continue from handler: continue to handler -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: continue to handler, nothing in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, continue from handler: display/i $pc -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, continue from handler: break handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, continue from handler: continue to handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, continue from handler: si in handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, continue from handler: advance in handler -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, continue from handler: break clear done -PASS: gdb.base/sigstep.exp: continue to handler, si+advance in handler, continue from handler: leave handler -PASS: gdb.base/sigstep.exp: stepi from handleri: display/i $pc -PASS: gdb.base/sigstep.exp: stepi from handleri: break handler -PASS: gdb.base/sigstep.exp: stepi from handleri: continue to handler -FAIL: gdb.base/sigstep.exp: stepi from handleri: leave handler -FAIL: gdb.base/sigstep.exp: stepi from handleri: leave signal trampoline -PASS: gdb.base/sigstep.exp: nexti from handleri: display/i $pc -PASS: gdb.base/sigstep.exp: nexti from handleri: break handler -PASS: gdb.base/sigstep.exp: nexti from handleri: continue to handler -FAIL: gdb.base/sigstep.exp: nexti from handleri: leave handler -FAIL: gdb.base/sigstep.exp: nexti from handleri: leave signal trampoline -PASS: gdb.base/sigstep.exp: finish from handleri: display/i $pc -PASS: gdb.base/sigstep.exp: finish from handleri: break handler -PASS: gdb.base/sigstep.exp: finish from handleri: continue to handler -FAIL: gdb.base/sigstep.exp: finish from handleri: leave handler -FAIL: gdb.base/sigstep.exp: finish from handleri: leave signal trampoline -PASS: gdb.base/sigstep.exp: return from handleri: display/i $pc -PASS: gdb.base/sigstep.exp: return from handleri: break handler -PASS: gdb.base/sigstep.exp: return from handleri: continue to handler -FAIL: gdb.base/sigstep.exp: return from handleri: leave handler -FAIL: gdb.base/sigstep.exp: return from handleri: leave signal trampoline -PASS: gdb.base/sigstep.exp: step to handler: display/i $pc -PASS: gdb.base/sigstep.exp: step to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: step to handler: advance to infinite loop -PASS: gdb.base/sigstep.exp: step to handler: break handler -FAIL: gdb.base/sigstep.exp: step to handler: performing step (timeout) -PASS: gdb.base/sigstep.exp: next to handler: display/i $pc -PASS: gdb.base/sigstep.exp: next to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: next to handler: advance to infinite loop -PASS: gdb.base/sigstep.exp: next to handler: break handler -FAIL: gdb.base/sigstep.exp: next to handler: performing next (timeout) -PASS: gdb.base/sigstep.exp: continue to handler: display/i $pc -PASS: gdb.base/sigstep.exp: continue to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: continue to handler: advance to infinite loop -PASS: gdb.base/sigstep.exp: continue to handler: break handler -PASS: gdb.base/sigstep.exp: continue to handler: performing continue -PASS: gdb.base/sigstep.exp: stepi to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: stepi to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: stepi to handler entry: advance to infinite loop -PASS: gdb.base/sigstep.exp: stepi to handler entry: break handler -FAIL: gdb.base/sigstep.exp: stepi to handler entry: performing stepi -PASS: gdb.base/sigstep.exp: nexti to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: nexti to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: nexti to handler entry: advance to infinite loop -PASS: gdb.base/sigstep.exp: nexti to handler entry: break handler -FAIL: gdb.base/sigstep.exp: nexti to handler entry: performing nexti -PASS: gdb.base/sigstep.exp: step to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: step to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: step to handler entry: advance to infinite loop -PASS: gdb.base/sigstep.exp: step to handler entry: break handler -FAIL: gdb.base/sigstep.exp: step to handler entry: performing step (timeout) -PASS: gdb.base/sigstep.exp: next to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: next to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: next to handler entry: advance to infinite loop -PASS: gdb.base/sigstep.exp: next to handler entry: break handler -FAIL: gdb.base/sigstep.exp: next to handler entry: performing next (timeout) -PASS: gdb.base/sigstep.exp: continue to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: continue to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: continue to handler entry: advance to infinite loop -PASS: gdb.base/sigstep.exp: continue to handler entry: break handler -PASS: gdb.base/sigstep.exp: continue to handler entry: performing continue -PASS: gdb.base/sigstep.exp: stepi over handler: display/i $pc -PASS: gdb.base/sigstep.exp: stepi over handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: stepi over handler: break clear done -PASS: gdb.base/sigstep.exp: stepi over handler: advance to infinite loop -PASS: gdb.base/sigstep.exp: stepi over handler: get next PC -PASS: gdb.base/sigstep.exp: stepi over handler: performing stepi -PASS: gdb.base/sigstep.exp: stepi over handler: advanced -PASS: gdb.base/sigstep.exp: nexti over handler: display/i $pc -PASS: gdb.base/sigstep.exp: nexti over handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: nexti over handler: break clear done -PASS: gdb.base/sigstep.exp: nexti over handler: advance to infinite loop -PASS: gdb.base/sigstep.exp: nexti over handler: get next PC -PASS: gdb.base/sigstep.exp: nexti over handler: performing nexti -PASS: gdb.base/sigstep.exp: nexti over handler: advanced -PASS: gdb.base/sigstep.exp: step over handler: display/i $pc -PASS: gdb.base/sigstep.exp: step over handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: step over handler: break clear done -PASS: gdb.base/sigstep.exp: step over handler: advance to infinite loop -FAIL: gdb.base/sigstep.exp: step over handler: performing step (timeout) -PASS: gdb.base/sigstep.exp: next over handler: display/i $pc -PASS: gdb.base/sigstep.exp: next over handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: next over handler: break clear done -PASS: gdb.base/sigstep.exp: next over handler: advance to infinite loop -FAIL: gdb.base/sigstep.exp: next over handler: performing next (timeout) -PASS: gdb.base/sigstep.exp: continue over handler: display/i $pc -PASS: gdb.base/sigstep.exp: continue over handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: continue over handler: break clear done -PASS: gdb.base/sigstep.exp: continue over handler: advance to infinite loop -PASS: gdb.base/sigstep.exp: continue over handler: performing continue -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler: break handler -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler: performing step -FAIL: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler: break handler -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler: continue to infinite loop -FAIL: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler: performing next (timeout) -FAIL: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler: backtrace (pattern 1) (timeout) -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: break handler -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: performing continue -FAIL: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler: break handler -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler: performing step -FAIL: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler: break handler -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler: performing next -FAIL: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler: break handler -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler: performing continue -FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler entry: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler entry: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler entry: break handler -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler entry: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler entry: performing step -FAIL: gdb.base/sigstep.exp: displaced=off: step on breakpoint, to handler entry: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler entry: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler entry: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler entry: break handler -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler entry: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler entry: performing next -FAIL: gdb.base/sigstep.exp: displaced=off: next on breakpoint, to handler entry: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler entry: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler entry: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler entry: break handler -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler entry: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler entry: performing continue -FAIL: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler entry: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler entry: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler entry: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler entry: break handler -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler entry: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler entry: performing step -FAIL: gdb.base/sigstep.exp: displaced=on: step on breakpoint, to handler entry: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler entry: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler entry: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler entry: break handler -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler entry: continue to infinite loop -FAIL: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler entry: performing next (timeout) -FAIL: gdb.base/sigstep.exp: displaced=on: next on breakpoint, to handler entry: backtrace (pattern 1) -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler entry: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler entry: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler entry: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler entry: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler entry: break handler -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler entry: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler entry: performing continue -FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, to handler entry: backtrace (pattern 2) -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: performing stepi -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler: advanced -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: performing stepi -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, no handler: advanced -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: get next PC -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: performing stepi -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint: advanced -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: performing stepi -PASS: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: advanced -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: performing nexti -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler: advanced -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: performing nexti -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, no handler: advanced -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: get next PC -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: performing nexti -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint: advanced -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: performing nexti -PASS: gdb.base/sigstep.exp: displaced=off: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: advanced -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler: continue to infinite loop -FAIL: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler: performing step (timeout) -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, no handler: performing step -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint: watch $convenience -FAIL: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint: performing step (timeout) -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: step on breakpoint, skip handler, with sw-watchpoint, no handler: performing step -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: continue to infinite loop -FAIL: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: performing next (timeout) -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, no handler: performing next -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint: watch $convenience -FAIL: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint: performing next (timeout) -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler, with sw-watchpoint, no handler: performing next -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler: performing continue -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, no handler: performing continue -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint: watch $convenience -FAIL: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint: performing continue (timeout) -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping off -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler, with sw-watchpoint, no handler: performing continue -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: performing stepi -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler: advanced -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: performing stepi -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: advanced -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: get next PC -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: performing stepi -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint: advanced -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: performing stepi -PASS: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: advanced -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: performing nexti -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler: advanced -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: performing nexti -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: advanced -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: get next PC -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: performing nexti -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: advanced -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: get next PC -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: performing nexti -PASS: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint, no handler: advanced -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler: continue to infinite loop -FAIL: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler: performing step (timeout) -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, no handler: performing step -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint: watch $convenience -FAIL: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint: performing step (timeout) -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: step on breakpoint, skip handler, with sw-watchpoint, no handler: performing step -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler: continue to infinite loop -FAIL: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler: performing next (timeout) -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, no handler: performing next -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint: watch $convenience -FAIL: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint: performing next (timeout) -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: next on breakpoint, skip handler, with sw-watchpoint, no handler: performing next -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: performing continue -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, no handler: performing continue -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: watch $convenience -FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: performing continue (timeout) -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: display/i $pc -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set displaced-stepping on -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set itimer = itimer_real -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set no_handler -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: break infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: break clear done -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: continue to infinite loop -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set done -PASS: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: performing continue +UNTESTED: gdb.base/sigstep.exp: aborted; in the following, GDB will get stuck Running ../../../W._C._Handy/gdb/testsuite/gdb.base/sizeof.exp ... PASS: gdb.base/sizeof.exp: next PASS: gdb.base/sizeof.exp: get integer valueof "sizeof (char)" (1) @@ -11526,17 +10724,17 @@ PASS: gdb.base/ui-redirect.exp: set logging off PASS: gdb.base/ui-redirect.exp: help Running ../../../W._C._Handy/gdb/testsuite/gdb.base/unload.exp ... PASS: gdb.base/unload.exp: pending breakpoint info before run -FAIL: gdb.base/unload.exp: running program (the program exited) -FAIL: gdb.base/unload.exp: pending breakpoint info on first run at shrfunc1 -FAIL: gdb.base/unload.exp: continuing to unloaded libfile (the program is no longer running) -FAIL: gdb.base/unload.exp: print y from libfile -FAIL: gdb.base/unload.exp: rerun to shared library breakpoint (the program exited) -FAIL: gdb.base/unload.exp: pending breakpoint info on second run at shrfunc1 -FAIL: gdb.base/unload.exp: continuing to unloaded libfile (the program is no longer running) -FAIL: gdb.base/unload.exp: continue to shrfunc2 (the program is no longer running) -FAIL: gdb.base/unload.exp: pending breakpoint info on second run at shrfunc2 -FAIL: gdb.base/unload.exp: continuing to unloaded libfile2 (the program is no longer running) -FAIL: gdb.base/unload.exp: print y from libfile2 +PASS: gdb.base/unload.exp: running program +PASS: gdb.base/unload.exp: pending breakpoint info on first run at shrfunc1 +PASS: gdb.base/unload.exp: continuing to unloaded libfile +PASS: gdb.base/unload.exp: print y from libfile +PASS: gdb.base/unload.exp: rerun to shared library breakpoint +PASS: gdb.base/unload.exp: pending breakpoint info on second run at shrfunc1 +PASS: gdb.base/unload.exp: continuing to unloaded libfile +PASS: gdb.base/unload.exp: continue to shrfunc2 +PASS: gdb.base/unload.exp: pending breakpoint info on second run at shrfunc2 +PASS: gdb.base/unload.exp: continuing to unloaded libfile2 +PASS: gdb.base/unload.exp: print y from libfile2 Running ../../../W._C._Handy/gdb/testsuite/gdb.base/until-nodebug.exp ... PASS: gdb.base/until-nodebug.exp: until 1 PASS: gdb.base/until-nodebug.exp: until 2 @@ -14065,12 +13263,12 @@ PASS: gdb.base/watchpoint-reuse-slot.exp: always-inserted on: hbreak x hbreak: : PASS: gdb.base/watchpoint-reuse-slot.exp: always-inserted on: hbreak x hbreak: : width 1, iter 3: base + 1: delete $bpnum Running ../../../W._C._Handy/gdb/testsuite/gdb.base/watchpoint-solib.exp ... PASS: gdb.base/watchpoint-solib.exp: set pending breakpoint -FAIL: gdb.base/watchpoint-solib.exp: continue to foo (the program exited) -FAIL: gdb.base/watchpoint-solib.exp: set watchpoint on g -FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit (the program is no longer running) +PASS: gdb.base/watchpoint-solib.exp: continue to foo +PASS: gdb.base/watchpoint-solib.exp: set watchpoint on g +PASS: gdb.base/watchpoint-solib.exp: continue to watchpoint hit PASS: gdb.base/watchpoint-solib.exp: rerun to main -FAIL: gdb.base/watchpoint-solib.exp: continue to foo again (the program exited) -FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again (the program is no longer running) +PASS: gdb.base/watchpoint-solib.exp: continue to foo again +PASS: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again Running ../../../W._C._Handy/gdb/testsuite/gdb.base/watchpoint-stops-at-right-insn.exp ... PASS: gdb.base/watchpoint-stops-at-right-insn.exp: set breakpoint always-inserted on PASS: gdb.base/watchpoint-stops-at-right-insn.exp: set probe hw watchpoint @@ -16803,34 +16001,34 @@ PASS: gdb.cp/impl-this.exp: at D::f (ambiguous names): print am.A<int>::i PASS: gdb.cp/impl-this.exp: at D::f (ambiguous names): print am.BB::A<int>::i PASS: gdb.cp/impl-this.exp: at D::f (ambiguous names): print am.CC::A<int>::i Running ../../../W._C._Handy/gdb/testsuite/gdb.cp/infcall-dlopen.exp ... -FAIL: gdb.cp/infcall-dlopen.exp: test 0 +PASS: gdb.cp/infcall-dlopen.exp: test 0 PASS: gdb.cp/infcall-dlopen.exp: test 0 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 0 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 1 +PASS: gdb.cp/infcall-dlopen.exp: test 1 PASS: gdb.cp/infcall-dlopen.exp: test 1 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 1 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 2 +PASS: gdb.cp/infcall-dlopen.exp: test 2 PASS: gdb.cp/infcall-dlopen.exp: test 2 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 2 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 3 +PASS: gdb.cp/infcall-dlopen.exp: test 3 PASS: gdb.cp/infcall-dlopen.exp: test 3 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 3 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 4 +PASS: gdb.cp/infcall-dlopen.exp: test 4 PASS: gdb.cp/infcall-dlopen.exp: test 4 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 4 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 5 +PASS: gdb.cp/infcall-dlopen.exp: test 5 PASS: gdb.cp/infcall-dlopen.exp: test 5 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 5 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 6 +PASS: gdb.cp/infcall-dlopen.exp: test 6 PASS: gdb.cp/infcall-dlopen.exp: test 6 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 6 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 7 +PASS: gdb.cp/infcall-dlopen.exp: test 7 PASS: gdb.cp/infcall-dlopen.exp: test 7 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 7 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 8 +PASS: gdb.cp/infcall-dlopen.exp: test 8 PASS: gdb.cp/infcall-dlopen.exp: test 8 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 8 stub 2 -FAIL: gdb.cp/infcall-dlopen.exp: test 9 +PASS: gdb.cp/infcall-dlopen.exp: test 9 PASS: gdb.cp/infcall-dlopen.exp: test 9 stub 1 PASS: gdb.cp/infcall-dlopen.exp: test 9 stub 2 Running ../../../W._C._Handy/gdb/testsuite/gdb.cp/inherit.exp ... @@ -22549,22 +21747,21 @@ PASS: gdb.mi/mi-breakpoint-changed.exp: pending resolved: delete breakpoint on p PASS: gdb.mi/mi-breakpoint-changed.exp: pending resolved: insert breakpoint on marker PASS: gdb.mi/mi-breakpoint-changed.exp: pending resolved: insert breakpoint on pendfunc3 PASS: gdb.mi/mi-breakpoint-changed.exp: pending resolved: continue to marker 1 -FAIL: gdb.mi/mi-breakpoint-changed.exp: pending resolved: breakpoint on pendfunc3 resolved -FAIL: gdb.mi/mi-breakpoint-changed.exp: pending resolved: continue to marker 2 (timeout) -FAIL: gdb.mi/mi-breakpoint-changed.exp: pending resolved: continuing to exit (MI error) -FAIL: gdb.mi/mi-breakpoint-changed.exp: pending resolved: breakpoint on pendfunc3 pending again (timeout) -FAIL: gdb.mi/mi-breakpoint-changed.exp: pending resolved: (timeout) +PASS: gdb.mi/mi-breakpoint-changed.exp: pending resolved: breakpoint on pendfunc3 resolved +PASS: gdb.mi/mi-breakpoint-changed.exp: pending resolved: continue to marker 2 +PASS: gdb.mi/mi-breakpoint-changed.exp: pending resolved: breakpoint on pendfunc3 pending again +PASS: gdb.mi/mi-breakpoint-changed.exp: pending resolved: Running ../../../W._C._Handy/gdb/testsuite/gdb.mi/mi-catch-load.exp ... PASS: gdb.mi/mi-catch-load.exp: breakpoint at main PASS: gdb.mi/mi-catch-load.exp: mi runto main PASS: gdb.mi/mi-catch-load.exp: catch-load: auto-solib-add on PASS: gdb.mi/mi-catch-load.exp: catch-load: catch load -FAIL: gdb.mi/mi-catch-load.exp: catch-load: solib-event stop +PASS: gdb.mi/mi-catch-load.exp: catch-load: solib-event stop PASS: gdb.mi/mi-catch-load.exp: breakpoint at main PASS: gdb.mi/mi-catch-load.exp: mi runto main PASS: gdb.mi/mi-catch-load.exp: catch-unload: auto-solib-add on PASS: gdb.mi/mi-catch-load.exp: catch-unload: catch unload -FAIL: gdb.mi/mi-catch-load.exp: catch-unload: solib-event stop +PASS: gdb.mi/mi-catch-load.exp: catch-unload: solib-event stop Running ../../../W._C._Handy/gdb/testsuite/gdb.mi/mi-cli.exp ... PASS: gdb.mi/mi-cli.exp: -interpreter-exec with no arguments PASS: gdb.mi/mi-cli.exp: -interpreter-exec with one argument @@ -25103,7 +24300,7 @@ PASS: gdb.python/py-finish-breakpoint.exp: set FinishBP after the exit() PASS: gdb.python/py-finish-breakpoint.exp: catch out of scope after exit PASS: gdb.python/py-finish-breakpoint.exp: set FinishBP after the exec PASS: gdb.python/py-finish-breakpoint.exp: catch exec -PASS: gdb.python/py-finish-breakpoint.exp: catch out of scope after exec +FAIL: gdb.python/py-finish-breakpoint.exp: catch out of scope after exec Running ../../../W._C._Handy/gdb/testsuite/gdb.python/py-finish-breakpoint2.exp ... PASS: gdb.python/py-finish-breakpoint2.exp: import python scripts PASS: gdb.python/py-finish-breakpoint2.exp: run to exception 1 @@ -25464,7 +24661,7 @@ PASS: gdb.python/py-objfile.exp: Get objfile user name PASS: gdb.python/py-objfile.exp: python print (gdb.lookup_objfile ("py-objfile").filename) PASS: gdb.python/py-objfile.exp: python print (gdb.lookup_objfile ("junk")) PASS: gdb.python/py-objfile.exp: Get objfile build id -PASS: gdb.python/py-objfile.exp: python print (gdb.lookup_objfile ("7ab823c965e72d9c7077d7fb58a3e87a7bf39e63", by_build_id=True).filename) +PASS: gdb.python/py-objfile.exp: python print (gdb.lookup_objfile ("da8bc92bb7ace920562bc4dd2c0029dbe4248741", by_build_id=True).filename) PASS: gdb.python/py-objfile.exp: python print (gdb.lookup_objfile ("foo", by_build_id=True)) PASS: gdb.python/py-objfile.exp: python print (gdb.lookup_objfile ("1234abcdef", by_build_id=True)) PASS: gdb.python/py-objfile.exp: Get objfile program space @@ -25482,7 +24679,7 @@ PASS: gdb.python/py-objfile.exp: Get separate debug info objfile PASS: gdb.python/py-objfile.exp: Test owner of separate debug file PASS: gdb.python/py-objfile.exp: Test user-name of owner of separate debug file PASS: gdb.python/py-objfile.exp: print main with debug info -PASS: gdb.python/py-objfile.exp: get python valueof "sep_objfile.build_id" (7ab823c965e72d9c7077d7fb58a3e87a7bf39e63) +PASS: gdb.python/py-objfile.exp: get python valueof "sep_objfile.build_id" (da8bc92bb7ace920562bc4dd2c0029dbe4248741) PASS: gdb.python/py-objfile.exp: python print (gdb.lookup_objfile (sep_objfile.build_id, by_build_id=True)) PASS: gdb.python/py-objfile.exp: gdb.lookup_objfile of symlinked binary Running ../../../W._C._Handy/gdb/testsuite/gdb.python/py-parameter.exp ... @@ -27029,7 +26226,7 @@ PASS: gdb.threads/interrupted-hand-call.exp: continue until exit Running ../../../W._C._Handy/gdb/testsuite/gdb.threads/kill.exp ... PASS: gdb.threads/kill.exp: threaded: successfully compiled posix threads test case PASS: gdb.threads/kill.exp: threaded: continue to breakpoint: break here -PASS: gdb.threads/kill.exp: threaded: all threads started +FAIL: gdb.threads/kill.exp: threaded: all threads started PASS: gdb.threads/kill.exp: threaded: kill program PASS: gdb.threads/kill.exp: non-threaded: continue to breakpoint: break here PASS: gdb.threads/kill.exp: non-threaded: kill program @@ -27615,6 +26812,7 @@ PASS: gdb.threads/threadapply.exp: run a simple print command on all threads PASS: gdb.threads/threadapply.exp: go down and check selected frame PASS: gdb.threads/threadapply.exp: thread apply all detach Running ../../../W._C._Handy/gdb/testsuite/gdb.threads/threxit-hop-specific.exp ... +WARNING: program timed out. PASS: gdb.threads/threxit-hop-specific.exp: successfully compiled posix threads test case FAIL: gdb.threads/threxit-hop-specific.exp: continue to thread start PASS: gdb.threads/threxit-hop-specific.exp: set thread specific breakpoint @@ -27624,8 +26822,8 @@ PASS: gdb.threads/tid-reuse.exp: successfully compiled posix threads test case PASS: gdb.threads/tid-reuse.exp: set print thread-events off PASS: gdb.threads/tid-reuse.exp: continue to breakpoint: after_count PASS: gdb.threads/tid-reuse.exp: get reuse_time -FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: do_nothing_thread_func -PASS: gdb.threads/tid-reuse.exp: continue to breakpoint: after_reuse_time +FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: do_nothing_thread_func (the program exited) +FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: after_reuse_time (the program is no longer running) Running ../../../W._C._Handy/gdb/testsuite/gdb.threads/tls-nodebug.exp ... PASS: gdb.threads/tls-nodebug.exp: successfully compiled posix threads test case FAIL: gdb.threads/tls-nodebug.exp: thread local storage @@ -28183,14 +27381,14 @@ PASS: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/loop.xml === gdb Summary === -# of expected passes 25599 -# of unexpected failures 1035 +# of expected passes 24915 +# of unexpected failures 910 # of unexpected successes 2 # of expected failures 38 # of unknown successes 1 # of known failures 54 # of unresolved testcases 2 -# of untested testcases 60 +# of untested testcases 62 # of unsupported tests 97 [...]/tschwinge/W._C._Handy.build/gdb/testsuite/../../gdb/gdb version 7.9.50.20150419-cvs -nw -nx -data-directory [...]/tschwinge/W._C._Handy.build/gdb/testsuite/../data-directory |