diff options
Diffstat (limited to 'TWiki/WikiNotation')
| -rw-r--r-- | TWiki/WikiNotation/XF86Config | 469 |
1 files changed, 0 insertions, 469 deletions
diff --git a/TWiki/WikiNotation/XF86Config b/TWiki/WikiNotation/XF86Config deleted file mode 100644 index 08a241df..00000000 --- a/TWiki/WikiNotation/XF86Config +++ /dev/null @@ -1,469 +0,0 @@ -# File generated by xf86config. - -# -# Copyright (c) 1999 by The XFree86 Project, Inc. -# -# Permission is hereby granted, free of charge, to any person obtaining a -# copy of this software and associated documentation files (the "Software"), -# to deal in the Software without restriction, including without limitation -# the rights to use, copy, modify, merge, publish, distribute, sublicense, -# and/or sell copies of the Software, and to permit persons to whom the -# Software is furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF -# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -# SOFTWARE. -# -# Except as contained in this notice, the name of the XFree86 Project shall -# not be used in advertising or otherwise to promote the sale, use or other -# dealings in this Software without prior written authorization from the -# XFree86 Project. -# - -# ********************************************************************** -# Refer to the XF86Config(4/5) man page for details about the format of -# this file. -# ********************************************************************** - -# ********************************************************************** -# Module section -- this section is used to specify -# which dynamically loadable modules to load. -# ********************************************************************** -# -Section "Module" - -# This loads the DBE extension module. - - Load "dbe" # Double buffer extension - -# This loads the miscellaneous extensions module, and disables -# initialisation of the XFree86-DGA extension within that module. - SubSection "extmod" - Option "omit xfree86-dga" # don't initialise the DGA extension - EndSubSection - -# This loads the Type1 and FreeType font modules - Load "type1" - Load "speedo" -# Load "freetype" -# Load "xtt" - -# This loads the GLX module - Load "glx" -# This loads the DRI module -# Load "dri" - -EndSection - -# ********************************************************************** -# Files section. This allows default font and rgb paths to be set -# ********************************************************************** - -Section "Files" - -# The location of the RGB database. Note, this is the name of the -# file minus the extension (like ".txt" or ".db"). There is normally -# no need to change the default. - - RgbPath "/usr/X11R6/lib/X11/rgb" - -# Multiple FontPath entries are allowed (which are concatenated together), -# as well as specifying multiple comma-separated entries in one FontPath -# command (or a combination of both methods) -# -# If you don't have a floating point coprocessor and emacs, Mosaic or other -# programs take long to start up, try moving the Type1 and Speedo directory -# to the end of this list (or comment them out). -# - -# FontPath "/usr/X11R6/lib/X11/fonts/TTF/" - FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/" - FontPath "/usr/X11R6/lib/X11/fonts/local/" - FontPath "/usr/X11R6/lib/X11/fonts/misc/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" - FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" - FontPath "/usr/X11R6/lib/X11/fonts/Type1/" -# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" -# FontPath "/usr/X11R6/lib/X11/fonts/freefont/" - FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" - FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" - -# The module search path. The default path is shown here. - -# ModulePath "/usr/X11R6/lib/modules" - -EndSection - -# ********************************************************************** -# Server flags section. -# ********************************************************************** - -Section "ServerFlags" - -# Uncomment this to cause a core dump at the spot where a signal is -# received. This may leave the console in an unusable state, but may -# provide a better stack trace in the core dump to aid in debugging - -# Option "NoTrapSignals" - -# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence -# (where n is 1 through 12). This allows clients to receive these key -# events. - -# Option "DontVTSwitch" - -# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence -# This allows clients to receive this key event. - -# Option "DontZap" - -# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching -# sequences. This allows clients to receive these key events. - -# Option "Dont Zoom" - -# Uncomment this to disable tuning with the xvidtune client. With -# it the client can still run and fetch card and monitor attributes, -# but it will not be allowed to change them. If it tries it will -# receive a protocol error. - -# Option "DisableVidModeExtension" - -# Uncomment this to enable the use of a non-local xvidtune client. - -# Option "AllowNonLocalXvidtune" - -# Uncomment this to disable dynamically modifying the input device -# (mouse and keyboard) settings. - -# Option "DisableModInDev" - -# Uncomment this to enable the use of a non-local client to -# change the keyboard or mouse settings (currently only xset). - -# Option "AllowNonLocalModInDev" - -EndSection - -# ********************************************************************** -# Input devices -# ********************************************************************** - -# ********************************************************************** -# Core keyboard's InputDevice section -# ********************************************************************** - -Section "InputDevice" - - Identifier "Keyboard1" - Driver "Keyboard" - Option "AutoRepeat" "500 30" - Option "XkbRules" "xfree86" - Option "XkbModel" "pc105" - Option "XkbLayout" "us,ru(winkeys)" - Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll" - -# For most OSs the protocol can be omitted (it defaults to "Standard"). -# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), -# uncomment the following line. - -# Option "Protocol" "Xqueue" - -# Option "AutoRepeat" "500 30" - -# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) -# Option "Xleds" "1 2 3" - -# Option "LeftAlt" "Meta" -# Option "RightAlt" "ModeShift" - -# To customise the XKB settings to suit your keyboard, modify the -# lines below (which are the defaults). For example, for a non-U.S. -# keyboard, you will probably want to use: -# Option "XkbModel" "pc102" -# If you have a US Microsoft Natural keyboard, you can use: -# Option "XkbModel" "microsoft" -# -# Then to change the language, change the Layout setting. -# For example, a german layout can be obtained with: -# Option "XkbLayout" "de" -# or: -# Option "XkbLayout" "de" -# Option "XkbVariant" "nodeadkeys" -# -# If you'd like to switch the positions of your capslock and -# control keys, use: -# Option "XkbOptions" "ctrl:swapcaps" - -# These are the default XKB settings for XFree86 -# Option "XkbRules" "xfree86" -# Option "XkbModel" "pc101" -# Option "XkbLayout" "us" -# Option "XkbVariant" "" -# Option "XkbOptions" "" - -# Option "XkbDisable" - -# Option "XkbRules" "xfree86" -# Option "XkbModel" "pc101" -# Option "XkbLayout" "us" - -EndSection - - -# ********************************************************************** -# Core Pointer's InputDevice section -# ********************************************************************** - -Section "InputDevice" - -# Identifier and driver - - Identifier "Mouse1" - Driver "mouse" - Option "ZAxisMapping" "4 5" - Option "Protocol" "IMPS/2" - Option "Device" "/dev/psaux" - -# Mouse-speed setting for PS/2 mouse. - -# Option "Resolution" "256" - -# When using XQUEUE, comment out the above two lines, and uncomment -# the following line. - -# Option "Protocol" "Xqueue" - -# Baudrate and SampleRate are only for some Logitech mice. In -# almost every case these lines should be omitted. - -# Option "BaudRate" "9600" -# Option "SampleRate" "150" - -# Emulate3Buttons is an option for 2-button Microsoft mice -# Emulate3Timeout is the timeout in milliseconds (default is 50ms) - -# Option "Emulate3Buttons" -# Option "Emulate3Timeout" "50" - -# ChordMiddle is an option for some 3-button Logitech mice - -# Option "ChordMiddle" - -EndSection - - -# ********************************************************************** -# Other input device sections -# this is optional and is required only if you -# are using extended input devices. This is for example only. Refer -# to the XF86Config man page for a description of the options. -# ********************************************************************** -# -# Section "InputDevice" -# Identifier "Mouse2" -# Driver "mouse" -# Option "Protocol" "MouseMan" -# Option "Device" "/dev/mouse2" -# EndSection -# -# Section "InputDevice" -# Identifier "spaceball" -# Driver "magellan" -# Option "Device" "/dev/cua0" -# EndSection -# -# Section "InputDevice" -# Identifier "spaceball2" -# Driver "spaceorb" -# Option "Device" "/dev/cua0" -# EndSection -# -# Section "InputDevice" -# Identifier "touchscreen0" -# Driver "microtouch" -# Option "Device" "/dev/ttyS0" -# Option "MinX" "1412" -# Option "MaxX" "15184" -# Option "MinY" "15372" -# Option "MaxY" "1230" -# Option "ScreenNumber" "0" -# Option "ReportingMode" "Scaled" -# Option "ButtonNumber" "1" -# Option "SendCoreEvents" -# EndSection -# -# Section "InputDevice" -# Identifier "touchscreen1" -# Driver "elo2300" -# Option "Device" "/dev/ttyS0" -# Option "MinX" "231" -# Option "MaxX" "3868" -# Option "MinY" "3858" -# Option "MaxY" "272" -# Option "ScreenNumber" "0" -# Option "ReportingMode" "Scaled" -# Option "ButtonThreshold" "17" -# Option "ButtonNumber" "1" -# Option "SendCoreEvents" -# EndSection - -# ********************************************************************** -# Monitor section -# ********************************************************************** - -# Any number of monitor sections may be present - -Section "Monitor" - - Identifier "My Monitor" - -# HorizSync is in kHz unless units are specified. -# HorizSync may be a comma separated list of discrete values, or a -# comma separated list of ranges of values. -# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S -# USER MANUAL FOR THE CORRECT NUMBERS. - -# HorizSync 31.5, 35.15, 35.5 - - HorizSync 30-64 # multisync -# HorizSync 31.5, 35.2 # multiple fixed sync frequencies -# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies - -# VertRefresh is in Hz unless units are specified. -# VertRefresh may be a comma separated list of discrete values, or a -# comma separated list of ranges of values. -# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S -# USER MANUAL FOR THE CORRECT NUMBERS. - - VertRefresh 50-70 - -EndSection - - -# ********************************************************************** -# Graphics device section -# ********************************************************************** - -# Any number of graphics device sections may be present - -# Standard VGA Device: - -Section "Device" - Identifier "Standard VGA" - VendorName "Unknown" - BoardName "Unknown" - -# The chipset line is optional in most cases. It can be used to override -# the driver's chipset detection, and should not normally be specified. - -# Chipset "generic" - -# The Driver line must be present. When using run-time loadable driver -# modules, this line instructs the server to load the specified driver -# module. Even when not using loadable driver modules, this line -# indicates which driver should interpret the information in this section. - - Driver "vga" -# The BusID line is used to specify which of possibly multiple devices -# this section is intended for. When this line isn't present, a device -# section can only match up with the primary video device. For PCI -# devices a line like the following could be used. This line should not -# normally be included unless there is more than one video device -# intalled. - -# BusID "PCI:0:10:0" - -# VideoRam 256 - -# Clocks 25.2 28.3 - -EndSection - -# Device configured by xf86config: - -Section "Device" - Identifier "RIVA TNT" - Driver "nvidia" - #VideoRam 131072 - # Insert Clocks lines here if appropriate -EndSection - - -# ********************************************************************** -# Screen sections -# ********************************************************************** - -# Any number of screen sections may be present. Each describes -# the configuration of a single screen. A single specific screen section -# may be specified from the X server command line with the "-screen" -# option. -Section "Screen" - Identifier "Screen 1" - Device "RIVA TNT" - Monitor "My Monitor" - DefaultDepth 24 - - Subsection "Display" - Depth 8 - Modes "1280x1024" "1024x768" "800x600" "640x480" - ViewPort 0 0 - EndSubsection - Subsection "Display" - Depth 16 - Modes "1280x1024" "1024x768" "800x600" "640x480" - ViewPort 0 0 - EndSubsection - Subsection "Display" - Depth 24 - Modes "1024x768" - ViewPort 0 0 - EndSubsection -EndSection - -# ********************************************************************** -# ServerLayout sections. -# ********************************************************************** - -# Any number of ServerLayout sections may be present. Each describes -# the way multiple screens are organised. A specific ServerLayout -# section may be specified from the X server command line with the -# "-layout" option. In the absence of this, the first section is used. -# When now ServerLayout section is present, the first Screen section -# is used alone. - -Section "ServerLayout" - -# The Identifier line must be present - Identifier "Simple Layout" - -# Each Screen line specifies a Screen section name, and optionally -# the relative position of other screens. The four names after -# primary screen name are the screens to the top, bottom, left and right -# of the primary screen. In this example, screen 2 is located to the -# right of screen 1. - - Screen "Screen 1" - -# Each InputDevice line specifies an InputDevice section name and -# optionally some options to specify the way the device is to be -# used. Those options include "CorePointer", "CoreKeyboard" and -# "SendCoreEvents". - - InputDevice "Mouse1" "CorePointer" - InputDevice "Keyboard1" "CoreKeyboard" - -EndSection - -# Section "DRI" -# Mode 0666 -# EndSection - |