diff options
| -rw-r--r-- | hurd/dde/guide.mdwn | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/hurd/dde/guide.mdwn b/hurd/dde/guide.mdwn index 0cea6655..bf41dd79 100644 --- a/hurd/dde/guide.mdwn +++ b/hurd/dde/guide.mdwn @@ -173,25 +173,25 @@ we can now build the necessary Hurd and DDE bits: $ autoreconf -i && ./configure - $ make libddekit libmachdev devnode pfinet # Hurd components. This is not needed if you have hurd >= 20120219-1 already installed and running. + $ make libddekit libmachdev devnode pfinet # Hurd components. This is not needed if you have the Debian hurd-dev >= 20120219-1 package already installed. - $ cd libdde_linux26 # common DDE driver code -- uses a different Makefile system than the Hurd components! + $ make -C libdde_linux26 # common DDE driver code -- uses a different Makefile system than the Hurd components! This is not needed if you have the Debian hurd-dev >= 20120219-2 package already installed. - $ make +If you have the Debian hurd-dev >= 20120219-2 package already installed (and thus skipped the previous steps), run: - $ cd ../dde_forcedeth # actual driver + $ make -C dde_forcedeth PKGDIR=/usr/share/libdde_linux26 # actual driver - $ make +otherwise, after doing the previous steps, use: -Install the various built components to their final destinations (as root): + $ make -C dde_forcedeth # actual driver + +Install the various built components to their final destinations (as root). You only need to install dde_forcedeth if you are already running the Debian gnumach >= 2:1.3.99.dfsg.git20120219-1 and hurd-dev >= 20120219-1 packages: $ cd ~me/dde/ $ cp gnumach/gnumach /boot/gnumach_dde - $ mkdir /hurd/dde - - $ cp hurd/devnode/devnode hurd/pfinet/pfinet hurd/dde_forcedeth/dde_forcedeth /hurd/dde + $ cp hurd/devnode/devnode hurd/pfinet/pfinet hurd/dde_forcedeth/dde_forcedeth /hurd Now everything should be ready. @@ -204,19 +204,19 @@ in the boottime grub menu while testing.) Once there, set up the translators for the driver (as root): - $ settrans -cap /dev/forcedeth /hurd/dde/dde_forcedeth + $ settrans -cap /dev/forcedeth /hurd/dde_forcedeth If that spews error "vm_allocate_contiguous: (ipc/mig) bad request message ID", you are mixing things: either use the debian kernel and the dde-debian incubator branch, or use your kernel built from the master-user_level_drivers branch and the dde incubator branch, but don't make any mixture. - $ settrans -cap /dev/eth0 /hurd/dde/devnode -M /dev/forcedeth eth0 + $ settrans -cap /dev/eth0 /hurd/devnode -M /dev/forcedeth eth0 Finally, we can set up the actual network translator, using something like: - $ settrans -cap /servers/socket/2 /hurd/dde/pfinet -i /dev/eth0 -a 192.168.1.194 -g 192.168.1.254 -m 255.255.255.0 + $ settrans -cap /servers/socket/2 /hurd/pfinet -i /dev/eth0 -a 192.168.1.194 -g 192.168.1.254 -m 255.255.255.0 For the exact syntax, see the normal network setup documentation. |