Weed TWiki/.

1 files changed, 0 insertions, 469 deletions

diff --git a/TWiki/WikiNotation/XF86Config b/TWiki/WikiNotation/XF86Config
deleted file mode 100644
index 08a241df..00000000
--- a/TWiki/WikiNotation/XF86Config
+++ /dev/null
@@ -1,469 +0,0 @@
-# File generated by xf86config.
-
-#
-# Copyright (c) 1999 by The XFree86 Project, Inc.
-#
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-# 
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
-# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-# SOFTWARE.
-# 
-# Except as contained in this notice, the name of the XFree86 Project shall
-# not be used in advertising or otherwise to promote the sale, use or other
-# dealings in this Software without prior written authorization from the
-# XFree86 Project.
-#
-
-# **********************************************************************
-# Refer to the XF86Config(4/5) man page for details about the format of 
-# this file.
-# **********************************************************************
-
-# **********************************************************************
-# Module section -- this  section  is used to specify
-# which dynamically loadable modules to load.
-# **********************************************************************
-#
-Section "Module"
-
-# This loads the DBE extension module.
-
-    Load        "dbe"  	# Double buffer extension
-
-# This loads the miscellaneous extensions module, and disables
-# initialisation of the XFree86-DGA extension within that module.
-    SubSection  "extmod"
-      Option    "omit xfree86-dga"   # don't initialise the DGA extension
-    EndSubSection
-
-# This loads the Type1 and FreeType font modules
-    Load        "type1"
-    Load        "speedo"
-#    Load        "freetype"
-#    Load        "xtt"
-
-# This loads the GLX module
-    Load       "glx"
-# This loads the DRI module
-#    Load       "dri"
-
-EndSection
-
-# **********************************************************************
-# Files section.  This allows default font and rgb paths to be set
-# **********************************************************************
-
-Section "Files"
-
-# The location of the RGB database.  Note, this is the name of the
-# file minus the extension (like ".txt" or ".db").  There is normally
-# no need to change the default.
-
-    RgbPath	"/usr/X11R6/lib/X11/rgb"
-
-# Multiple FontPath entries are allowed (which are concatenated together),
-# as well as specifying multiple comma-separated entries in one FontPath
-# command (or a combination of both methods)
-# 
-# If you don't have a floating point coprocessor and emacs, Mosaic or other
-# programs take long to start up, try moving the Type1 and Speedo directory
-# to the end of this list (or comment them out).
-#
-
-#    FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"
-    FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/"
-    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
-    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
-    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
-    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
-    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
-    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
-#    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
-#    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
-    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
-    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
-
-# The module search path.  The default path is shown here.
-
-#    ModulePath "/usr/X11R6/lib/modules"
-
-EndSection
-
-# **********************************************************************
-# Server flags section.
-# **********************************************************************
-
-Section "ServerFlags"
-
-# Uncomment this to cause a core dump at the spot where a signal is 
-# received.  This may leave the console in an unusable state, but may
-# provide a better stack trace in the core dump to aid in debugging
-
-#    Option "NoTrapSignals"
-
-# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
-# (where n is 1 through 12).  This allows clients to receive these key
-# events.
-
-#    Option "DontVTSwitch"
-
-# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
-# This allows clients to receive this key event.
-
-#    Option "DontZap"
-
-# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
-# sequences.  This allows clients to receive these key events.
-
-#    Option "Dont Zoom"
-
-# Uncomment this to disable tuning with the xvidtune client. With
-# it the client can still run and fetch card and monitor attributes,
-# but it will not be allowed to change them. If it tries it will
-# receive a protocol error.
-
-#    Option "DisableVidModeExtension"
-
-# Uncomment this to enable the use of a non-local xvidtune client. 
-
-#    Option "AllowNonLocalXvidtune"
-
-# Uncomment this to disable dynamically modifying the input device
-# (mouse and keyboard) settings. 
-
-#    Option "DisableModInDev"
-
-# Uncomment this to enable the use of a non-local client to
-# change the keyboard or mouse settings (currently only xset).
-
-#    Option "AllowNonLocalModInDev"
-
-EndSection
-
-# **********************************************************************
-# Input devices
-# **********************************************************************
-
-# **********************************************************************
-# Core keyboard's InputDevice section
-# **********************************************************************
-
-Section "InputDevice"
-
-    Identifier	"Keyboard1"
-    Driver	"Keyboard"
-    Option "AutoRepeat" "500 30"
-    Option "XkbRules" "xfree86"
-    Option "XkbModel" "pc105"
-    Option "XkbLayout" "us,ru(winkeys)"
-    Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
-    
-# For most OSs the protocol can be omitted (it defaults to "Standard").
-# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
-# uncomment the following line.
-
-#    Option     "Protocol"      "Xqueue"
-
-#    Option "AutoRepeat" "500 30"
-
-# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
-#    Option	"Xleds"      "1 2 3"
-
-#    Option "LeftAlt"     "Meta"
-#    Option "RightAlt"    "ModeShift"
-
-# To customise the XKB settings to suit your keyboard, modify the
-# lines below (which are the defaults).  For example, for a non-U.S.
-# keyboard, you will probably want to use:
-#    Option "XkbModel"    "pc102"
-# If you have a US Microsoft Natural keyboard, you can use:
-#    Option "XkbModel"    "microsoft"
-#
-# Then to change the language, change the Layout setting.
-# For example, a german layout can be obtained with:
-#    Option "XkbLayout"   "de"
-# or:
-#    Option "XkbLayout"   "de"
-#    Option "XkbVariant"  "nodeadkeys"
-#
-# If you'd like to switch the positions of your capslock and
-# control keys, use:
-#    Option "XkbOptions"  "ctrl:swapcaps"
-
-# These are the default XKB settings for XFree86
-#    Option "XkbRules"    "xfree86"
-#    Option "XkbModel"    "pc101"
-#    Option "XkbLayout"   "us"
-#    Option "XkbVariant"  ""
-#    Option "XkbOptions"  ""
-
-#    Option "XkbDisable"
-
-#    Option "XkbRules"	"xfree86"
-#    Option "XkbModel"	"pc101"
-#    Option "XkbLayout"	"us"
-
-EndSection
-
-
-# **********************************************************************
-# Core Pointer's InputDevice section
-# **********************************************************************
-
-Section "InputDevice"
-
-# Identifier and driver
-
-    Identifier	"Mouse1"
-    Driver	"mouse"
-    Option "ZAxisMapping" "4 5"
-    Option "Protocol"    "IMPS/2"
-    Option "Device"      "/dev/psaux"
-
-# Mouse-speed setting for PS/2 mouse.
-
-#    Option "Resolution"	"256"
-
-# When using XQUEUE, comment out the above two lines, and uncomment
-# the following line.
-
-#    Option "Protocol"	"Xqueue"
-
-# Baudrate and SampleRate are only for some Logitech mice. In
-# almost every case these lines should be omitted.
-
-#    Option "BaudRate"	"9600"
-#    Option "SampleRate"	"150"
-
-# Emulate3Buttons is an option for 2-button Microsoft mice
-# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
-
-#    Option "Emulate3Buttons"
-#    Option "Emulate3Timeout"    "50"
-
-# ChordMiddle is an option for some 3-button Logitech mice
-
-#    Option "ChordMiddle"
-
-EndSection
-
-
-# **********************************************************************
-# Other input device sections 
-# this is optional and is required only if you
-# are using extended input devices.  This is for example only.  Refer
-# to the XF86Config man page for a description of the options.
-# **********************************************************************
-#
-# Section "InputDevice" 
-#    Identifier  "Mouse2"
-#    Driver      "mouse"
-#    Option      "Protocol"      "MouseMan"
-#    Option      "Device"        "/dev/mouse2"
-# EndSection
-#
-# Section "InputDevice"
-#    Identifier "spaceball"
-#    Driver     "magellan"
-#    Option     "Device"        "/dev/cua0"
-# EndSection
-#
-# Section "InputDevice"
-#    Identifier "spaceball2"
-#    Driver     "spaceorb"
-#    Option     "Device"        "/dev/cua0"
-# EndSection
-#
-# Section "InputDevice"
-#    Identifier "touchscreen0"
-#    Driver     "microtouch"
-#    Option     "Device"        "/dev/ttyS0"
-#    Option     "MinX"          "1412"
-#    Option     "MaxX"          "15184"
-#    Option     "MinY"          "15372"
-#    Option     "MaxY"          "1230"
-#    Option     "ScreenNumber"  "0"
-#    Option     "ReportingMode" "Scaled"
-#    Option     "ButtonNumber"  "1"
-#    Option     "SendCoreEvents"
-# EndSection
-#
-# Section "InputDevice"
-#    Identifier "touchscreen1"
-#    Driver     "elo2300"
-#    Option     "Device"        "/dev/ttyS0"
-#    Option     "MinX"          "231"
-#    Option     "MaxX"          "3868"
-#    Option     "MinY"          "3858"
-#    Option     "MaxY"          "272"
-#    Option     "ScreenNumber"  "0"
-#    Option     "ReportingMode" "Scaled"
-#    Option     "ButtonThreshold"       "17"
-#    Option     "ButtonNumber"  "1"
-#    Option     "SendCoreEvents"
-# EndSection
-
-# **********************************************************************
-# Monitor section
-# **********************************************************************
-
-# Any number of monitor sections may be present
-
-Section "Monitor"
-
-    Identifier  "My Monitor"
-
-# HorizSync is in kHz unless units are specified.
-# HorizSync may be a comma separated list of discrete values, or a
-# comma separated list of ranges of values.
-# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
-# USER MANUAL FOR THE CORRECT NUMBERS.
-
-#    HorizSync   31.5, 35.15, 35.5
-
-    HorizSync	30-64         # multisync
-#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
-#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
-
-# VertRefresh is in Hz unless units are specified.
-# VertRefresh may be a comma separated list of discrete values, or a
-# comma separated list of ranges of values.
-# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
-# USER MANUAL FOR THE CORRECT NUMBERS.
-
-    VertRefresh 50-70
-
-EndSection
-
-
-# **********************************************************************
-# Graphics device section
-# **********************************************************************
-
-# Any number of graphics device sections may be present
-
-# Standard VGA Device:
-
-Section "Device"
-    Identifier	"Standard VGA"
-    VendorName	"Unknown"
-    BoardName	"Unknown"
-
-# The chipset line is optional in most cases.  It can be used to override
-# the driver's chipset detection, and should not normally be specified.
-
-#    Chipset	"generic"
-
-# The Driver line must be present.  When using run-time loadable driver
-# modules, this line instructs the server to load the specified driver
-# module.  Even when not using loadable driver modules, this line
-# indicates which driver should interpret the information in this section.
-
-    Driver     "vga"
-# The BusID line is used to specify which of possibly multiple devices
-# this section is intended for.  When this line isn't present, a device
-# section can only match up with the primary video device.  For PCI
-# devices a line like the following could be used.  This line should not
-# normally be included unless there is more than one video device
-# intalled.
-
-#    BusID      "PCI:0:10:0"
-
-#    VideoRam	256
-
-#    Clocks	25.2 28.3
-
-EndSection
-
-# Device configured by xf86config:
-
-Section "Device"
-    Identifier  "RIVA TNT"
-    Driver      "nvidia"
-    #VideoRam    131072
-    # Insert Clocks lines here if appropriate
-EndSection
-
-
-# **********************************************************************
-# Screen sections
-# **********************************************************************
-
-# Any number of screen sections may be present.  Each describes
-# the configuration of a single screen.  A single specific screen section
-# may be specified from the X server command line with the "-screen"
-# option.
-Section "Screen"
-    Identifier  "Screen 1"
-    Device      "RIVA TNT"
-    Monitor     "My Monitor"
-    DefaultDepth 24
-
-    Subsection "Display"
-        Depth       8
-        Modes       "1280x1024" "1024x768" "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-    Subsection "Display"
-        Depth       16
-        Modes       "1280x1024" "1024x768" "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-    Subsection "Display"
-        Depth       24
-        Modes       "1024x768"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-# **********************************************************************
-# ServerLayout sections.
-# **********************************************************************
-
-# Any number of ServerLayout sections may be present.  Each describes
-# the way multiple screens are organised.  A specific ServerLayout
-# section may be specified from the X server command line with the
-# "-layout" option.  In the absence of this, the first section is used.
-# When now ServerLayout section is present, the first Screen section
-# is used alone.
-
-Section "ServerLayout"
-
-# The Identifier line must be present
-    Identifier  "Simple Layout"
-
-# Each Screen line specifies a Screen section name, and optionally
-# the relative position of other screens.  The four names after
-# primary screen name are the screens to the top, bottom, left and right
-# of the primary screen.  In this example, screen 2 is located to the
-# right of screen 1.
-
-    Screen "Screen 1"
-
-# Each InputDevice line specifies an InputDevice section name and
-# optionally some options to specify the way the device is to be
-# used.  Those options include "CorePointer", "CoreKeyboard" and
-# "SendCoreEvents".
-
-    InputDevice "Mouse1" "CorePointer"
-    InputDevice "Keyboard1" "CoreKeyboard"
-
-EndSection
-
-# Section "DRI"
-#    Mode 0666
-# EndSection
-